Senao Co AT53V114 Wireless Cardbus Adapter User Manual 5354CB Manual

Senao International Co Ltd Wireless Cardbus Adapter 5354CB Manual

Contents

Revised Manual

1ContentsCHAPTER 1 INTRODUCTION...........................................................................................................21-1 PACKAGE CONTENTS.......................................................................................................................21-2 PC CARD DESCRIPTION...................................................................................................................21-3 SYSTEM REQUIREMENTS .................................................................................................................31-4 FEATURES AND BENEFITS................................................................................................................31-5 APPLICATIONS .................................................................................................................................31-6 NETWORK CONFIGURATIONS .......................................................................................................... 4CHAPTER 2 INSTALLING DRIVERS & CLIENT UTILITY ........................................................62-1 INSTALLATION FOR WINDOWS 98SE/ME/2000/XP.........................................................................72- 2 CHECKING AFTER INSTALLATION .................................................................................................102- 3 IEEE 802.11 WLAN NIC CLIENT UTILITY .................................................................................112- 4 UNINSTALLING DRIVER AND UTILITY ..........................................................................................14CHAPTER 3 CONNECTING TO A NETWORK ............................................................................153-1 CHECKING AND ADDING CLIENT FOR MICROSOFT NETWORKS .....................................................153-2 CHECKING AND ADDING NETBEUI...............................................................................................163-3 CHECKING AND ADDING TCP/IP...................................................................................................163-4 CHECKING AND ADDING FILE AND PRINTER SHARING FOR MICROSOFT .......................................17NETWORKS ..........................................................................................................................................173-5 CHECKING AND ADDING COMPUTER NAME & WORKGROUP NAME ............................................. 17CHAPTER 4 TROUBLESHOOTING ...............................................................................................19APPENDIX A PRODUCT SPECIFICATIONS.........................................................................................22APPENDIX B REGULATORY COMPLIANCE INFORMATION .............................................................23
2Chapter 1 IntroductionThe Dual-Band Wireless A/G Cardbus Adapter operates seamlessly and simultaneouslyin both the2.4GHz and 5GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster802.11a (5GHz, 54Mbps/108Mbps turbo mode) and 802.11g (2.4GHz, 54MHz) wireless standards. It’sthe best way to add wireless capability to your existing wired network, or to add bandwidth to your wirlessinstallation.To protect your wireless connectivity, the Dual-Band Wireless A/G Cardbus Adapter can encrypt allwireless transmissions through 64/128/152-bit WEP data encryption. Dynamic Frequency Selection(DFS) puts your network on the cleanest channel in your location. With the Dual-Band Wireless CardbusAdapter, you will experience the bes wireless connectivity nowadays.1-1 Package ContentsThe PC Card package contains the following items.1. One PC Card2. One Quick Installation Guide3. One Installation CD1-2 PC Card DescriptionThe PC Card is a standard PC Card that fits into any PCMCIA Card Type II slot. The PC Card has a LEDindicator and two antenna connectors as shown in Figure 1-1. Figure 1-11.Integrated, with built-in diversity Antenna2. Link LED802.11 AdHoc mode – Blinking, no matter the wireless is connected or notInfrastructure – Solid GREEN when the wireless is connectedOff – No wireless activity12
31-3 System RequirementsInstallation of the PC Card requires: Laptop PC containing :– 32-bit CardBus slot (or Desktop PC with PC Card-PCI adapter)– 32 MB memory or greater– 300 MHz processor or higher Microsoft Windows 2000/Windows Millennium Edition/Windows 98Second Edition/Windows XP/Windows NT 4.0 (with Service Pack 6)1-4 Features and Benefits2.4GHz IEEE802.11b/g (draft) standard and5GHz IEEE802.11a standard compliantFully interoperable with IEEE802.11a/b/g (draft)compliant products.Up to 54Mbps and 108Mbps (turbo mode)high-speed data ratesCapable of handling heavy data payloads suchas MPEG video streaming.Up to 152-bit WEP Data Encryption with TKIP Powerful data security.IEEE802.11x Client support (Optional) Enhances authentication and security.Dynamic Frequency Selection (DFS) supportProvides flexible selection of the best frequencyto allow mobility among all existingIEEE802.11a/b/g networks.Transmission Power Control (TPC) support Offers flexibility to adjust RF output power.Multi-country Roaming (802.11d) support Automatically adjusts regulatory domain tooperate in different countries.1-5 ApplicationsThe wireless LAN products are easy to install and highly efficient. The following list describes some of themany applications made possible through the power and flexibility of wireless LANs:1. Difficult-to-wire environmentsThere are many situations where wires can not or not easily be laid. Historic buildings, older buildings,open areas and across busy streets make the installation of LANs either impossible or very expensive.2. Temporary workgroupsConsider situations in parks, athletic arenas, exhibitions, disaster-recovery, temporary office andconstruction sites where one wants a temporary WLAN established and removed.3. The ability to access real-time informatiosDoctors/nurses, point-of-sale employees, and warehouse workers can access real-time information whiledealing with patients, serving customers and processing information.4. Frequently changed environmentsShow rooms, meeting rooms, retail stores, and manufacturing sites where frequently rearrange theworkplace.5. Small Office and Home Office (SOHO) networksSOHO users need a cost-effective, easy and quick installation of a small network.
4Wireless LAN PC CardPeer to PeerWireless LAN PC CardWireless LAN PC CardWireless LAN USB Adapter6. Wireless extensions to Ethernet networksNetwork managers in dynamic environments can minimize the overhead caused by moves, extensions tonetworks, and other changes with wireless LANs.7. Wired LAN backupNetwork managers implement wireless LANs to provide backup for mission-critical applications runningon wired networks.8. Training/Educational FacilitiesTraining sites at corporations and students at universities use wireless connectivity to ease access toinformation, information exchanges, and learning.1-6 Network ConfigurationsTo better understand how the wireless LAN products work together to create a wireless network, it mightbe helpful to depict a few of the possible wireless LAN PC card network configurations. The wireless LANproducts can be configured as:1. Ad-hoc (or peer-to-peer) for departmental or SOHO LANs.2. Infrastructure for enterprise LANs.3. IP Sharing for 56K/ISDN TA/Cable/DSL Modem – Connect Internet and your SOHO network.Ad-hoc (peer-to-peer) ModeThis is the simplest network configuration that several computers equipped with the PC Cards that form awireless network whenever they are within range of one another (Figure 1-2). In ad-hoc mode, eachclient, is peer-to-peer, would only have access to the resources of the other client and requires no theaccess point. This is the easiest and least expensive way for the SOHO to set up a wireless network.Figure 1-2 A wireless Ad-hoc networkInfrastructure ModeThe infrastructure mode requires the use of an access point (AP). In this mode, all wireless
5Wireless LAN PC CardWireless LANRouter/APFile serverWireless LANRouter/APWireless LAN USB Adapter Wireless LAN USB AdapterWireless LAN PC CardWireless LAN PC CardWireless LAN PC CardWireless LAN USB AdapterFile serverNetwork PrinterEn t e rn e tWireless LAN PC Card Wireless LAN Router/APWireless LAN PC Cardcommunications between two computers have to be via the AP no matter the AP is wired to Ethernetnetwork or stand-alone. If used in stand-alone, the AP can extend the range of independent wirelessLANs by acting a repeater, which effectively doubling the distance between wireless stations as shown inFigure 1-3.Figure 1-3Extended-range independent WLAN using AP as repeaterIf wired to an Ethernet network as shown in Figure 1-4, the AP serves as a bridge and provides the linkbetween the server and the wireless clients. The wireless clients can move freely throughout thecoverage area of the AP while remaining connected to the server. Since the ap is connected to the wirednetwork, each client would have access to server resources as well as to other clients.Figure 1-4 Single AP bridgeAccess points have a finite range, on the order of 50 meters indoor and 100 meters outdoors. In a verylarge facility such as an enterprise, a warehouse, or on a college campus, it will probably be necessary toinstall more than one access point to cover an entire building or campus, as shown in Figure 1-5. In thisscenario, access points hand the client off from one to another in a way that is invisible to the client,ensuring roken connectivity. Wireless clients can roam seamlessly between different coverage areas andremain connected to the network.Wireless LAN PC CardWireless LAN Router/APLLInfrastructureWireless LAN PC Card Wireless LAN USB Adapter
6Wireless LANPC CardWireless LANUSB AdapterWireless LANRouter/AP56K/ISDN TA/Cable/Xdsl ModemFirewallInternetWireless LANPC CardFigure 1-5 Multiple-AP and roamingWireless Router and IP SharingIn infrastructure mode, in addition to acting as a bridge between an Ethernet and wireless network, theAP can be configured as a wireless router and IP sharing device for Internet access as shown in Figure1-6. You don’t have to buy an expensive router. Nor you have to buy several modems and setup phonelines. Just share one AP, one Modem, single dial-up account, and one phone line, dozens of networkusers can go surfing the Internet concurrently.Figure 1-6 Wireless router and IP SharingChapter 2 Installing Drivers & Client UtilityThis chapter describes how to install the PC Card drivers and client utility under Windows
798/ME/2000/XP.2-1 Installation for Windows 98SE/ME/2000/XPThis section describes the first-time installation for the driver installation under Windows 98SE/ME/2000.For a previously installed driver, we provides the InstallShield Wizard, which includes an application forupgrading the present driver and the Utility.Installation Procedure:1. Turn on your computer.2. Be sure that there is no PCMCIA adapter inserted yet.3. Insert the Wireless LAN Installation CD into your CD-ROM drive. Then executing Setup.exe byselecting file from the CD-ROM drive.4. When the Setup.exe program starting, it will pop up an window as shown in Figure 2-1., click on theNext button to continue the installation.Figure 2-15. After finishing all installation steps, click Finish to complete the installation as Figure 2-2.
8Figure 2-26. Insert the PC Card into the PCMCIA slot of your computer and wait for the Found New HardwareWizard dialog box to display.7. During the installation, the driver and utility will both been installed into the system, so please select Install the software automatically (Recommended) as shown in Figure 2-3 and click Next tosearch the driver installation file.Figure 2-38. Then the system will find the driver and start to install as shown in Figure 2-4.
9Figure 2-49. The driver currently does not have a digital signature from Microsoft. Therefore, Windows 2000/XP willshow a warning message. Click Continue Anyway to proceed with driver installation as shown inFigure 2-5.Figure 2-510. Click Finish to complete the driver installation as shown in Figure 2-6.Figure 2-6
102- 2 Checking after InstallationAfter installing the driver and utility, follow the steps below to check that the PC Card isoperating correctly.1. Click the Start button, select Settings, and then click Control Panel.2. In the Control Panel window, double-click the System icon, then select the Device Manager tab.3. Double-click Network adapters, then select Wireless Network Adapter as shown in Figure 2-7.Figure 2-74. Right mouse and click the Properties button, then check the message. This device is workingproperly is displayed for Device status as shown in Figure 2-8.Figure 2-85. If you find the Yellow (?) sign on the adapter or the above message is not displayed, itshows the installation is not successful or the wireless LAN PC Card is not operatingproperly. Uninstall and re-install the driver, referring to Chapter 2-4 Uninstalling Driver andUtility.
112- 3 IEEE 802.11 WLAN NIC Client UtilityUse the WLAN NIC Client Utility to configure the device driver. Access the Utility by clickingthe Start button and choosing Programs > IEEE 802.11 > ACU. The ACU tray icon is displayedin the right side of the Toolbar. Launch the ACU by double-clicking the tray icon, or by right-clicking the tray icon and selecting Launch Client Utility …WLAN Client Utility is used to display or change the PC Card information about CurrentStatus, Profile Management and Diagnostics. The client utility will be installed automaticallyafter installing the driver and utility. After finishing installing the driver and utility, the client utilitywill automatically be executed and show a small icon at the right corner of Taskbar wheneverthe PC Card is inserted into the PC Card slot of your computer. You can click the taps on thetop of the windows to select various screen messages as shown in Figure 2-9.Figure 2-9The tool bar provides three functions of Action, Option and Help.Action : the Disable Radio function is used to break down the wireless connection, theCountry Select… is used to select suitable country code for the utility and if youdon’t want to see icon shown in Taskbar, you can use Disable Tray Icon function tohide the icon.Option : you can use Display settings to change Signal Strength Display Units, RefreashInterval and Data Disply settings.Help : click About IEEE 802.11 Client Utility… function to get related information of the ClientUtility.Except for tool bar’s function, the Utility also provides Current Status, Profile Management andDiagnostics three main function page for configuration.Below we explain the use and meanings of the various screen messages.1. Current StasusIn Current Status, it will provides user information of Profile Name, Network Type, Wireless Mode,Current Channel, Link Status, Encryption and IP Address. If you click Advanced button, it will popadvanced status as shown in Figure 2-10, and in Advanced Status, it provide user information of Country,Transmit Power Level, Network Name (SSID), Power Save Mode, Frequency, Transmit Rate andReceive Rate.
12Figure 2-102. Profile ManagementIn Profile Management, it provides function to New, Modify, Remove or Activate an Profile settings asshown in Figure 2-11. With default status, the profile will be empty and you have to click New button toadd an profile settings and if there exist Profile file, we can use Modify button to change settings or useRemove button to erase file or Activate button to activate another profile settings.Figure 2-11After click New button, it will pop Profile Management window including General, Security and Advancedthree configuration pages.In General page : type the desirable profile name into the Profile Name field and the known SSID intothe Network field.In Security page : the default value is Disable and we provide Pre-Shared Keys, LEAP and ExternallyManaged 802.1x Keys for selection.In Advanced page : you can set Power Save Mode, Network Type, 802.11 Preamble, Transmit PowerLevel and Wireless Mode in this page.In Profile Management, it also provides Available Networks…. for the user to get informationof available AP and Ad Hoc Networks as shown in Figure 2-12.
13Figure 2-123. DiagnosticsIn Diagnostics, it provides statistics of Multicast Frames, Broadcast Frames. Unicast Framesand Total Bytes for Transmit and Receive as shown in Figure 2-13.Figure 2-13In Advanced Statistics, it provides more advanced information for reference as shown inFigure 2-14.Figure 2-14In Driver Information, it provides information of Card Name, MAC Address, Driver, DriverVersion and Driver Date as shown in Figure 2-15.
14Figure 2-152- 4 Uninstalling Driver and UtilityIf the PC Card installation is unsuccessful for any reason, the best way to solve the problemmay be to completely uninstall the PC Card and its software and repeat the installationprocedure again.1.Click the Start button, select Settings, and then click Control Panel.2.In the Control Panel window, double-click the Add or Remove Programs icon, then select the 802.11Wireless LAN item and remove the driver and utility as shown in Figure 2-16.Figure 2-164. Select Remove in InstallShield Wizard and click Next to start to remove driver then click Finish tocomplete driver and utility uninstallation as shown in Figure 2-17.5.
15Figure 2-17Chapter 3 Connecting to a NetworkThis chapter describes how to prepare for connection to network after install the PC Card drivers andutility. The following is required for all computers if you want to connect to a network.1. Check Client for Microsoft Networks is installed.2. Check NetBEUI -> Wireless LAN PC Card installed.3. Check TCP/IP -> Wireless LAN PC Card is installed.4. Check file and printer sharing for Microsoft Networks.5. Check computer name and workgroup name.3-1 Checking and Adding Client for Microsoft NetworksThe Client for Microsoft Networks enables you to connect to other Microsoft Windows computers andservers and use the files and printers shared on them. If you works on Microsoft network environment,you need to set up Client for Microsoft Networks.After finishing installing the driver & utility and rebooting the computer as described in Chapter 2. Thecomputer will show a dialog box titled Enter Network Password dialog box. Enter your password if it hadbeen set or just click Cancel.Click Start button, select Settings and then click Control Panel to open the Control Panel window.In the Control Panel window, double-click the Network icon to open the Network dialog box.Select Configuration tab to check Client for Microsoft Networks is installed as shown in Figure 3-1. If no,click the Add or Install button. Select Client and click the Add button.
16Figure 3-1Select Microsoft for Manufacturer and Client for Microsoft Networks for Network Client, and then clickOK.3-2 Checking and Adding NetBEUINetBEUI is a protocol you can use to connect to Windows NT, Windows for Workgroups, or LANManager servers. If you work on Microsoft network environment, you need to set up NetBEUI protocol.Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. SelectConfiguration tab to check NetBEUI -> Wireless LAN PC Card is installed. If no, click the Add or Installbutton. Select Protocol and click the Add button. Select Microsoft for Manufacturer and NetBEUI forNetwork Protocol, and then click OK.3-3 Checking and Adding TCP/IPTCP/IP is the protocol you use to connect to the Internet and wide-area networks. If you want to connectto Internet, you need to set up TCP/IP protocol.Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. SelectConfiguration tab to check TCP/IP -> Wireless LAN PC Card is installed. If no, click the Add or Installbutton. Select Protocol and click the Add button. Select Microsoft for Manufacturer and TCP/IP forNetwork Protocol, and then click OK.If yes, double-click TCP/IP -> Wireless LAN PC Card to open TCP/IP properties as shown in Figure 3-2.Due to different network applications there are many different settings here. You can select either Obtainan IP address automatically or Specify an IP address. If you use the Specify and IP address, then youneed to enter an IP address, Subnet Mask, Gateway IP address, and DNS Server IP address for
17connecting to Internet.Figure 3-23-4 Checking and Adding File and Printer Sharing for Microsoft NetworksFile and printer sharing for Microsoft networks gives you the ability to share your files or printers withWindows NT and Windows for Workgroups computers. If you want to share your files or printers withMicrosoft networks, you need to set up this service.Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. SelectConfiguration tab to check File and printer sharing for Microsoft Networks is installed. If no, click the Fileand Printer Sharing button.In the File and Print Sharing window, select what you need, and click OK. File and printer sharing forMicrosoft Networks, and then click OK.3-5 Checking and Adding Computer Name & Workgroup NameWindows uses the computer name and workgroup name to identify your computer on the network.Please enter an unique name for your computer, the workgroup it will appear in, and a short descriptionof the computer.In Windows 98SE/ME, Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for MicrosoftNetworks. Select Identification tab or User Information tab to check the computer name, workgroup andcomputer description are entered. If no, enter a computer name, a workgroup name and then click OK.The description field may be left blank. If you want to share data with other persons, make sure you havethe same workgroup name.In Windows 2000/XP, from Start > Settings > Control Panel and click System, select Computer Namepage as shown in Figure 3-3.
18Figure 3-3Then click Change… button to rename the computer or join a domain or a Workgroup as shown inFigure 3-4.Figure 3-4
19Chapter 4 TroubleshootingThis chapter describes the problems and corresponding solutions that may occur when installing a PCCard.Symptom SolutionWindows does notdetect the PC Card wheninstalled.Verify that the PC Card is properlyinserted into the PC Card slot.Check whether the computer has aPlug and Play BIOS.Windows 98/ME/2000/XP might notdetect the PC Card if a previousinstallation of the PC Card wascancelled before it was finished.Remove the previous driver, and redoThe installation again.Driver fails to load A resource conflict could exist.For Windows 98/ME/2000, use theDevice Manager to resolve resourceconflicts.Select System from the Control Panel,then click on the Device Manager tab.
20Device conflict on aWindows systemA device conflict under Windows98/ME/2000 may be related tothe PC Card.For Windows 98/ME/2000, use theComputer properties to identify theused I/O port addresses and IRQvalues.If there is a device conflict, selectalternative settings for I/O Base Addressor IRQ values. If you know which deviceis conflicting with the PC Card, you havethe option of changing that device’s I/Oaddress or IRQ instead of changing the PCCard.No resource conflicts weredetected, but the wirelessstation does not attach tothe networkVerify that the SSID of the PC Cardmatches that of the access point. Usethe Network Configuration PropertiesApplication in the Control Panel tomodify the SSID.Verify that the Network Mode of thePC Card is configured correctly.Nonfunctioning card LEDThe PC Card is not powered on. Thecause may be:y No Driver loaded or installed.y Card – Driver mismatch whichprevented the driver from loading.y Device conflict which preventedthe driver from loading.Actions:y Verify that a driver has beeninstalled.y Determine if there is a conflictwith another device.Weak signal orintermittent connection.Try reorienting the antenna. The PCCard antenna is attached to the endof the PC Card. For best use of theantenna:Keep the area around the antennaclear from materials that could blockradio transmission, such as metalobjects, electronic devices, andcordless telephones.If your signal is weak, change thedirection of the antenna slightly.If necessary, move your notebook
21computer a few inches to find a bettersignal.Use the Signal Strength display in theClient Utility to determine the best locationand orientation for a network connection.
22Appendix A Product Specifications1. GeneralRadio Data Rate(Auto-rate capable)802.11a :6, 9, 12, 18, 24, 36, 48, 54 & 108Mbps turbo mode802.11g :6, 9, 12, 18, 24, 36, 48 & 54Mbps802.11b :1, 2, 5.5, 11MbpsNetwork Standards WECA (Wi-Fi & Wi-Fi5 Compliant), IEEE802.11,IEEE802.11a, IEEE802.11g draft, IEEE802.11b, draftIEEE802.11e, f, h and I standards, IEEE802.11x (Optional)Security z IEEE802.11x Support for LEAP (Optional)z WPA – Wi-Fi Protected Access (64, 128, 152-WEPwith TKIP)Network Architecture Support ad-hoc, peer-to-peer networks and infrastructurecommunications to wired Ethernet networks via AccessPointDrivers Windows 98/ME/2000/XPAccess Protocol CSMA/CA with ACKRoaming IEEE802.11b compliantOperating Voltage 3.3V/5VRegulation Certifications FCC Part 15/UL, ETSI 300/328/CELED Indicator RF Link activity2. RF InformationFrequency Band 802.11a :5.15 to 5.25GHz5.25 to 5.35GHz5.725 to 5.825GHz802.11b/g :2.412 to 2.462GHz2.412 to 2.484GHz2.412 to 2.472GHz2.457 to 2.462GHz2.457 to 2.472GHzModulation Technology 802.11a/g : OFDM (64-QAM, 16-QAM, QPSK, BPSK)802.11b : DSSS (DBSK, DQPSK, CCK)Receive Sensitivity(Typical)802.11a :-86dBm@6Mbps, -80dBm@18Mbps, -70dBM@ 48Mbps-84dBm@9Mbps, -77dBm@24Mbps, -68dBM@ 54Mbps-82dBm@12Mbps, -73dBm@36Mbps802.11b/g :-91dBm@1Mbps, -85dBm@9Mbps, -77dBM@ 36Mbps-89dBm@2Mbps, -82dBm@12Mbps, -76dBM@ 48Mbps-87dBm@5.5Mbps, -80dBm@18Mbps, -73dBM@ 54Mbps-86dBm@6Mbps, -78dBm@24MbpsTransmit Output Power 802.11a : Up to 18dBm802.11b/g : Up to 18dBm3. EnvironmentalTemperature Range -10℃ to 60℃ (14℉ to 140℉) – Operating-40℃ to 70℃ (-40℉ to 158℉) - StorageHumidity (non-condensing) 5% to 95% Typical4. Physical SpecificationsInterface 32-bit CardBus PC Card Standard V7.1 Type IIAntenna Integrated built-in diversity AntennaDimensions 118(L)mm * 54(W)mm * 6.3(H)mm (4.65in * 2.13in * 0.30in)
23Appendix B Regulatory Compliance InformationRadio Frequency Interference RequirementsThis device complies with Part 15 of FCC Rules and Canada RSS-210.Operation is subject to the following conditions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesiredoperation.3. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.4. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.5. Since the module is installed inside the end product, the end product should be affixed a label onvisible area showing that this product contains a RF module, and also its FCC ID.Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC Caution : To assure continued compliance, (example – use only shielded interface cables whenconnecting to computer or peripheral devices). Any changes or modifications not expressly approved bythe party responsible for compliance could void the user’s authority to operate this equipment.

Navigation menu