Senao Co SI-7800H WIRELESS IP PHONE User Manual SI 7800H User s Manual V1 1

Senao International Co Ltd WIRELESS IP PHONE SI 7800H User s Manual V1 1

Users Manual

User’s Manual SENAO WIRELESS SOLUTIONS PROVIDER SI-7800H WiFi Phone Version 1.1 May 18, 2004
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 2Table of Contents Chapter 1 Overview of the SI-7800H ........................ 5 1.1 Front Panel and Keypad ............................................ 5 1.2 Removing and Installing the Battery .......................... 7 1.3 Charging the SI-7800H .............................................. 8 1.3.1 Charging the SI-7800H by using the Travel Charger....8 1.3.2 Charging the SI-7800H by using the Desktop Charger 8 1.4 Powering the SI-7800H On and Off ........................... 9 1.5 Main Screen............................................................... 9 1.6 Entering and Editing text.......................................... 10 1.7 Making a Phone Call................................................ 10 1.7.1 Enter the phone number manually..............................10 1.7.2 Using the Phonebook..................................................10 1.7.3 Using the Call History..................................................10 1.7.4 Redial a number..........................................................11 1.8 Answering a Call ...................................................... 11 1.9 Hangup a Call .......................................................... 11 Chapter 2 Menu Architecture.................................. 12 Chapter 3 Phonebook.............................................. 14 3.1 Browse the Phonebook............................................ 14 3.2 Create a new record................................................. 15 3.3 Review ..................................................................... 15 Chapter 4 Call History ............................................. 16 4.1 Outgoing Calls.......................................................... 16 4.2 Incoming Calls.......................................................... 17 4.3 Missed Calls............................................................. 17 4.4 Erase Record ........................................................... 17 Chapter 5 Phone Settings....................................... 18 5.1 Ringer Melody.......................................................... 19 5.2 Melody Select........................................................... 19 5.3 Key Tone.................................................................. 19 5.4 Vibrator..................................................................... 19 5.5 Speaker Volume....................................................... 19 5.6 Restore Default ........................................................ 19 Chapter 6 SIP Settings ............................................ 20 6.1 Display Name........................................................... 21
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 36.2 SIP User Name ........................................................ 21 6.3 Realm name............................................................. 21 6.4 Authentication Name................................................ 21 6.5 Password ................................................................. 21 6.6 Registrar................................................................... 21 6.7 Registrar Status ....................................................... 21 6.8 Registration Time (sec)............................................ 21 6.9 Proxy........................................................................ 22 6.10 Proxy Status........................................................... 22 6.11 Outbound Proxy ..................................................... 22 6.12 Out. Proxy Status................................................... 22 6.13 Codec Order........................................................... 22 6.14 VAD Status............................................................. 22 Chapter 7 IP Settings............................................... 23 7.1 DHCP....................................................................... 24 7.2 System name ........................................................... 24 7.3 Static IP Address...................................................... 24 7.4 Subnet Mask ............................................................ 24 7.5 Default Gateway....................................................... 24 7.6 DNS Server Pri......................................................... 24 7.7 DNS Server Sec....................................................... 24 7.8 DNS Domain ............................................................ 24 7.9 NetBIOS Server ....................................................... 24 Chapter 8 WLAN Settings ....................................... 25 8.1 SSID......................................................................... 26 8.2 Channel.................................................................... 26 8.3 Tx Rate..................................................................... 26 8.4 Mode ........................................................................ 26 8.5 Site Survey............................................................... 26 8.6 Roaming Setup ........................................................ 26 8.7 Encryption ................................................................ 26 8.7.1 Authentication Type ....................................................27 8.7.2 Encryption ...................................................................27 8.7.3 Used Key.....................................................................27 8.7.4 WEP Key Settings.......................................................27 8.8 QoS.......................................................................... 27 Chapter 9 System Time........................................... 28 9.1 Time Setting............................................................. 28 9.2 SNTP Setting ........................................................... 29
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 49.2.1 Time Zone Setting.......................................................29 9.2.2 SNTP Status................................................................29 9.2.3 Polling Time.................................................................29 9.2.4 SNTP Server 1 to 4.....................................................29 Chapter 10 Information ........................................... 30 10.1 SIP Information ...................................................... 30 10.2 Network Information............................................... 31 10.3 System Information ................................................ 31 Chapter 11 Profile.................................................... 32 11.1 Key Lock ................................................................ 32 11.2 Speed Dial.............................................................. 33 11.3 Ringer Melody........................................................ 33 11.4 Vibrator................................................................... 33 11.5 Speaker Volume..................................................... 33 Chapter 12 Web-based Management Interface ..... 34 12.1 Login the Management Interface ........................... 34 12.2 Main Page of the Management Interface............... 34 12.3 System Setting....................................................... 35 12.3.1 System Date & Time .................................................36 12.3.2 Administrator Settings...............................................36 12.3.3 Firmware Upgrade ....................................................37 12.3.4 Configuration Tools...................................................38 12.3.5 Status ........................................................................38 12.3.6 Reset.........................................................................38 12.4 LAN Setting............................................................ 38 12.4.1 Dynamic IP................................................................39 12.4.2 Static IP.....................................................................39 12.4.3 DNS...........................................................................39 12.5 Wireless Setting ..................................................... 39 12.5.1 Setting .......................................................................40 12.6 SIP Setting ............................................................. 40 12.6.1 Setting .......................................................................41 12.7 Phone Settings....................................................... 41 12.7.1 Phone Settings..........................................................42 12.8 Phone Book............................................................ 42 12.8.1 Phone Book Edit .......................................................43 12.8.2 Call History................................................................43
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 5Chapter 1 Overview of the SI-7800H Senao WiFi phones (SI-7800H) are compliant to IEEE 802.11b standard and IETF Session Initiation Protocol (SIP). As long as users are in the coverage of APs (Access Point), they can use SI-7800H to make VoIP phone calls over WLAN. The SI-7800Hs enhance productivity and bring mobility to people at home, in hot spots, offices, hospitals, warehouses, retail stores, universities, hotels, resorts and other environments. The easy-to-use SI-7800H can be configured by keypad and LCD display. A Web-based management interface is also provided for configuration and firmware upgrade. 1.1 Front Panel and Keypad Figure 1.1.1 SENAO WiFi Phone SI-7800H Power On/Off KeyEarphone JackGraphic LCD Display928316574MicrophoneReceiverLED indicator
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 6 LED Indicator: ON – When the SI-7800H is in wake up mode, WLAN packets can be transmitted or received by the SI-7800H. OFF – When the SI-7800H is in sleep mode, no WLAN packets can be transmitted or received by the SI-7800H. Key Description 1 Arrow key: Used to navigate from one function to another, move the cursor in entry mode and adjust volume when talking. At standby mode, press ▲ to get status information and press▼ to access the list of placed calls. 2 Right soft key: Used to perform functions displayed in the tab shown above it. 3 End key: Used to end or reject a call or return to standby mode. 4 0-9 Number key: Used to enter numbers and characters. 5 Pound key: In entry mode, use the pound key to select among number, upper or lower case character. 6 Asterisk key: In entry mode, use the asterisk key to enter ‘.’, ‘@’ and ‘:’. 7 Hot key to the Profile menu. 8 Answer/Send key: Used to answer a call or dial a number. 9 Left soft key: Used to perform functions displayed in the tab shown above it. Table 1.1.1: Keypad function description
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 71.2 Removing and Installing the Battery To remove the battery: Turn the handset face down and locate the battery release button at the middle of the handset. Push the release button and lift the battery up to remove it. Please refer to Figure 1.2.1. Figure 1.2.1 Remove the battery To install the battery: First carefully slide the bottom battery pack tabs into open slot at the back of the phone as shown in Figure 1.2.2. The bottom of the battery pack should lock into the back of the handset. Press down on the top of the battery pack into the handset and you should hear a “click” which signifies the battery securing into place on the handset. Figure 1.2.2 Install the battery Release ButtonBattery
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 81.3 Charging the SI-7800H Before the first time use of the SI-7800H, please charge it for at least six hours. The battery icon on the LCD display will show the charging status. Please refer to figure 1.3.1. Charging in progress Fully charged Figure 1.3.1 Battery icon as a charging status indicator 1.3.1 Charging the SI-7800H by using the Travel Charger The travel charger is a standard accessory of SI-7800H. Use the following steps to charge the SI-7800H. (1) Plug the travel charger to a wall outlet. (2) Plug the travel charger’s connector to the jack at the bottom of the SI-7800H to start charging. Please refer to Figure 1.3.1.1. Figure 1.3.1.1 Plug the travel charger’s connector to SI-7800H 1.3.2 Charging the SI-7800H by using the Desktop Charger The desktop charger is an optional accessory of SI-7800H. Use the following steps to charge the SI-7800H. (1) Connect the power adaptor to the desktop charger’s DC IN jack at the bottom of the charger.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 9(2) Plug the power adapter to a wall outlet. (3) Put the SI-7800H on the desktop charger to start charging. Please refer to Figure 1.3.2.1. Figure 1.3.2.1 SI-7800H on the desktop charger 1.4 Powering the SI-7800H On and Off Press and hold the Power On/Off key for approximately 2.5 seconds to turn the SI-7800H on or off. 1.5 Main Screen After powering on, the phone enters standby mode, with the main screen displayed, as shown in Figure 1.4.1 Figure 1.4.1 Main Screen at Standby mode 1 Battery icon 2 User name 3 Right soft key tab 4 Left soft key tab 5 Entering/Information line: i) Entering phone number/SIP URL here or ii) showing information at standby mode, using ▲ to switch between WLAN SSID and current IP address information 6 Signal strength icon R 08:30 user WLAN Ready Menu PhBook45236178
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 107 Registration status indicator: when SIP registration is enabled, the capital R indicates SI-7800H has registered to the SIP Registrar successfully. If SI-7800H fails to register to the SIP Registrar, a capital U will appear. A cross sign (X) means the user name or password is incorrect. A rotating line indicates the registration is in progress. 8 Time 1.6 Entering and Editing text In many situations you need to enter numbers and characters in an entering field. Please refer to the following guidelines: • Press to switch between upper case character, lower case character and numeric mode, with the icon , or shown at the middle of the bottom of LCD screen respectively. • Press to enter ‘.’, ‘@’ or ‘:’ by pressing it once, twice or three times respectively. • In or mode, press numeric key ‘1’ to enter a space. • Press ▲ or ▼ to move the cursor. • Press to clear the number/character that the cursor points to. • Press to abort the editing. 1.7 Making a Phone Call 1.7.1 Enter the phone number manually You can enter phone number (needing SIP Proxy Server and Registrar) or SIP URL at the entering line. Then press to make a phone call. Please refer to Figure 1.7.1.1. Figure 1.7.1.1 Enter the phone number/SIP URL manually to make a phone call 1.7.2 Using the Phonebook You can search the Phonebook by name to get the phone number/SIP URL and make a call. Please refer to Chapter 3 Phonebook. 1.7.3 Using the Call History You can find the phone number/SIP URL from the Call History to make a phone call. Please refer to Chapter 4 Call History. R 08:50 user 6660123 Call Clear 08:55 user tina@192.168.2.5 Call Clear abcABC 123ABC abc 123 123
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 11 1.7.4 Redial a number At the standby mode, press ▼. The list of placed calls is displayed. The latest dialed number is highlighted, so you can redial this number directly by pressing the left soft key. 1.8 Answering a Call To answer a call, press . When talking you can use ▲ and ▼ to adjust the volume. To reject a call, press . Please refer to Figure 1.8.1 Figure 1.8.1 Answer or reject a call 1.9 Hangup a Call When talking, press to hang up the call. Please refer to Figure 1.9.1. Figure 1.9.1 Hangup a call 08:55 Accept Refuse 08:55 Hangup Incoming Call tina@192.168.2.5 Talking tina@192.168.2.5
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 12Chapter 2 Menu Architecture In the standby mode, you can press the right soft key to select the Phonebook menu or press the left soft key to select the main Menu. Figure 2.0.1 Selecting main Menu and Phonebook Menu The Phonebook menu will be discussed in Chapter 3 Phonebook. The main Menu architecture is shown below and will be discussed through Chapter 4 to Chapter 10. Figure 2.0.2 Main Menu Architecture In standby mode, press to select the main Menu. The main menu is displayed, as shown in Figure 2.0.3. Then you can use ▲ or ▼ to scroll through its submenu list and press to select the submenu. 08:55 user WLAN Ready Menu PhBook Phonebook menuMain MenuMenu IP Settings SIP SettingsPhone Settings Call HistoryInformationWLAN SettingsSystem Time
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 13 Figure 2.0.3 Main Menu 1. Call History 2. Phone Settings 3. SIP Settings Select Back
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 14Chapter 3 Phonebook This chapter provides information about accessing the Phonebook menu and using its features. Figure 3.0.1 shows the architecture of the Phonebook menu. Figure 3.0.1 Phonebook menu architecture In standby mode, press . The Phonebook menu is displayed, as shown in Figure 3.0.2 Figure 3.0.2 Phonebook menu 3.1 Browse the Phonebook 1. In the Phonebook menu, press ▲ or ▼ to scroll to Browse. Then press 1. Browse 2. Create 3. Review Select BackPhonebook Review Create User NameDelete Browse View Edit SIP URLApply
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 15 to select it. 2. Press ▲ or ▼ to scroll to the name you want to browse. Then press to select it. 3. Now you can view, edit or delete this record. 4. When viewing one record, you can recall the phone number/SIP URL of that record by pressing the left soft key and then make a call. Please refer to Figure 3.1.1 Figure 3.1.1 Recall a phone number/SIP URL from Phonebook 3.2 Create a new record 1. In the Phonebook menu, press ▲ or ▼ to scroll to Create. Then press to select it. 2. Now you can enter the user name and its phone number/SIP URL to the phonebook. 3.3 Review 1. In the Phonebook menu, press ▲ or ▼ to scroll to Review. Then press to select it. 2. Now you can see how many records are in the phonebook. My best friend tom@192.168.1.50 Recall Back
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 16Chapter 4 Call History This chapter provides information about accessing the Call History menu and using its features. Figure 4.0.1 shows the architecture of the Call History menu. Figure 4.0.1 Call History menu architecture In the main Menu, press ▲ or ▼ to scroll to Call History. Then press to select it. The Call History menu is displayed, as shown in Figure 4.0.2 Figure 4.0.2 Call History menu 4.1 Outgoing Calls In the Call History menu, select Outgoing Calls. The Outgoing Calls menu is displayed, as shown in Figure 4.1.1. Figure 4.1.1 Outgoing Calls menu 1. Outgoing Calls 2. Incoming Calls 3. Missed Calls Select BackJohn@192.168.1.20 101@192.168.1.50 102@192.168.1.60 Call CancelCall History Incoming Outgoing Erase RecordMissed Calls
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 17 You can press ▲ or ▼ to scroll through the last 10 phone numbers dialed, and press to make a call of that number. 4.2 Incoming Calls In the Call History menu, select Incoming Calls. The Incoming Calls menu is displayed, as shown in Figure 4.2.1. Figure 4.2.1 Incoming Calls menu You can press ▲ or ▼ to scroll through the last 10 incoming phone numbers and press to make a call of that number. 4.3 Missed Calls In the Call History menu, select Missed Calls. The Missed Calls menu is displayed. You can press ▲ or ▼ to scroll through the last 10 missed phone numbers and press to make a call of that number. 4.4 Erase Record In the Call History menu, select Erase Record. The Erase Record menu is displayed. You can press ▲ or ▼ to select which call history you want to delete. Then press to delete it. Jack@192.168.1.210 101@192.168.1.50 102@192.168.1.60 Call Cancel
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 18 Chapter 5 Phone Settings This chapter provides information about accessing the Phone Settings menu and using its features. Figure 5.0.1 shows the architecture of the Phone Settings menu. Figure 5.0.1 Phone Settings menu architecture In the main Menu, press ▲ or ▼ to scroll to Phone Settings and press to select it. The Phone Settings menu is displayed, as shown in Figure 5.0.2 Figure 5.0.2 Phone Settings menu 1. Ringer Melody 2. Melody Select 3. Key Tone Select BackPhone Settings Restore Default Speaker VolumeVibrator Melody Select Ringer Melody Off/on Volume 1 to 5 No/Yes Off/on Melody 1 to 11 Key Tone Disable/Enable
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 195.1 Ringer Melody The ringer can be turned on or off for incoming calls. 5.2 Melody Select You can select ringer melody from Melody 1 to Melody 11. Then you can play the melody and set it active. 5.3 Key Tone This feature allows users to decide if there is key tone when keypad is pressed. 5.4 Vibrator Vibrator can be turned on or off for incoming calls. 5.5 Speaker Volume Speaker/Receiver volume can be adjusted by choosing from Volume 1 (lowest volume) to Volume 5 (highest volume). 5.6 Restore Default Restore the phone settings to the factory default settings.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 20Chapter 6 SIP Settings This chapter provides information about accessing the SIP Settings menu and using its features. Figure 6.0.1 shows the architecture of the SIP Settings menu. Figure 6.0.1 SIP Settings menu architecture SIP Settings Proxy Registrar Status Password Realmname Display Name Codec Order Outbound ProxySIP User Name Auth. Name Registrar Disable/Enable Proxy Status Outbound StatusReg. Time(sec) Disable/Enable Disable/Enable G.729 G.711(PCMU) G.711(PCMA) G.723 G.726-16 G.726-24 G.726-32 G.726-40 VAD Status
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 21 In the main Menu, press ▲ or ▼ to scroll to SIP Settings. Then press to select it. The SIP Settings menu is displayed, as shown in Figure 6.0.2 Figure 6.0.2 SIP Settings menu 6.1 Display Name Enter the display name here. 6.2 SIP User Name Enter the SIP user name/phone number here. 6.3 Realm name Enter the realm name here. 6.4 Authentication Name Enter the authentication name here. 6.5 Password Enter the password here. 6.6 Registrar Enter the Registrar’s IP address and port number here. For example, 160.23.12.5:5060 6.7 Registrar Status You can enable or disable the SI-7800H to register to a registrar. 6.8 Registration Time (sec) Enter the registration time here. The SI-7800H will re-start registering to a registrar at the period of the registration time. 1. Display Name 2. SIP User Name 3. Realmname Select Back
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 226.9 Proxy Enter the SIP proxy server’s IP address and port number here. For example, 160.23.12.5:5060 6.10 Proxy Status You can enable or disable the SI-7800H to use the SIP proxy server. 6.11 Outbound Proxy The outbound proxy is used to do NAT/Firewall traversal for users sitting behind NAT/Firewall equipments. Enter the outbound proxy server’s IP address and port number here. For example, 160.23.12.8:9090 6.12 Out. Proxy Status You can enable or disable the SI-7800H to use the outbound proxy server. 6.13 Codec Order You can choose the codec you prefer to use from the audio codec list. 6.14 VAD Status You can disable or enable the VAD (Voice Activity Detection) function here.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 23 Chapter 7 IP Settings This chapter provides information about accessing the IP Settings menu and using its features. Figure 7.0.1 shows the architecture of the IP Settings menu. Figure 7.0.1 IP Settings menu architecture In the main Menu, press ▲ or ▼ to scroll to IP Settings and press to select it. The IP Settings menu is displayed, as shown in Figure 7.0.2 Figure 7.0.2 IP Settings menu 1. DHCP 2. System Name 3.Static IP Address Select BackIP Settings Default GatewaySubnet Mask Static IP AddressSystem Name DHCP DNS Server Sec. DNS Server Pri. Disable/EnableDNS Domain NetBIOS Server
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 24Note 1: After any modification of settings in this IP settings menu, you need to reboot the WiFi Phone to make the new settings effective. Note 2: Please don’t use the following subnets on the SI-7800H- 192.168.1.x and 192.168.99.x. 7.1 DHCP You can get the dynamic IP address, default gateway and DNS server IP address from a DHCP server if you enable the DHCP function. If you want to configure these settings manually, please disable this DHCP function. 7.2 System name Enter the system name here. 7.3 Static IP Address If you disable the DHCP function, please enter the static IP address here. 7.4 Subnet Mask Enter the subnet mask of the static IP address here. 7.5 Default Gateway Enter the default gateway IP address here. 7.6 DNS Server Pri. Enter the primary DNS server IP address here. 7.7 DNS Server Sec. Enter the secondary DNS server IP address here. 7.8 DNS Domain Enter the DNS domain here. 7.9 NetBIOS Server Enter the NetBIOS server IP address here.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 25Chapter 8 WLAN Settings This chapter provides information about accessing the WLAN Settings menu and using its features. Figure 8.0.1 shows the architecture of the WLAN Settings menu. Figure 8.0.1 WLAN Settings menu architecture WLAN Settings Auth. Type Roaming Site Survey Tx Rate SSID QoS WEP Key Settings Channel Mode Roaming Setup SSID 1 to SSID 5Encryption TypeEncryption Used Key 1/2/5.5/11Mbps/AutoDisable/Enable Open System/Shared Key Disable/64 /128 Bits Key #1 to Key #4 Set 64/128 Bit Key 1/2/3/4 Disable/Enable
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 26 In the main Menu, press ▲ or ▼ to scroll to WLAN Settings. Then press to select it. The WLAN Settings menu is displayed, as shown in Figure 8.0.2 Figure 8.0.2 WLAN Settings menu Note: After any modification of settings in this WLAN settings menu, you need to reboot the WiFi Phone to make the new settings effective. 8.1 SSID Enter the WLAN SSID here. You can enter ‘any’ to allow the SI-7800H to associate with any AP. 8.2 Channel Get the current channel number information. 8.3 Tx Rate Select WLAN Tx rate here. 8.4 Mode Only infrastructure mode is available. 8.5 Site Survey This SI-7800H can do WLAN site survey. You can browse the AP list of all APs found by SI-7800H and choose to join an AP in the list. 8.6 Roaming Setup You can disable or enable the roaming function. If you enable the roaming function, the SI-7800H can roam among APs with SSID matching anyone in the list from SSID 1 to SSID 5. 8.7 Encryption You can choose authentication type, disable or enable encryption, choose key number and set those 64 or 128 bit keys in this submenu. 1. SSID 2. Channel 3. Tx Rate Select Back
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 278.7.1 Authentication Type You can choose open system or shared key as the authentication type. 8.7.2 Encryption You can disable it or you can enable it with 64 or 128 bit key. 8.7.3 Used Key You can choose any key from key 1 to key 4 for WEP encryption. 8.7.4 WEP Key Settings You can set the WEP key here. 8.8 QoS You can disable or enable the QoS function here.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 28Chapter 9 System Time This chapter provides information about accessing the System Time menu and using its features. Figure 9.0.1 shows the architecture of the System Time menu. Figure 9.0.1 System Time menu architecture In the main Menu, press ▲ or ▼ to scroll to System Time and press to select it. The System Time menu is displayed, as shown in Figure 9.0.2 Figure 9.0.2 System Time menu 9.1 Time Setting You can set time and date in this submenu. The time can be set in the 24-hour or 12-hour format. The date can be set in the YYYY.MM.DD, MM.DD.YYYY or DD.MM.YYYY format. 1. Time Setting 2. SNTP Setting Select BackSystem Time Clock SettingsDaylight Saving Time Zone TimeZone SettingTime Setting Date SettingsSNTP Setting Polling TimeSNTP StatusSNTP Server 1 to 4
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 29 9.2 SNTP Setting 9.2.1 Time Zone Setting This submenu includes Time Zone and Daylight Saving configuration. You can select the time zone in which you are located from the time zone list. You can disable or enable the daylight saving function. If you want to use daylight saving function, you also need to set the daylight saving duration, from the start month/date to the end month/date, in this submenu. 9.2.2 SNTP Status You can disable or enable the function of synchronizing SI-7800H’s time to SNTP servers. 9.2.3 Polling Time You can set the polling time of the SI-7800H for how often to get time information from SNTP servers. 9.2.4 SNTP Server 1 to 4 You can set the IP addresses of SNTP server 1 to server 4 here.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 30Chapter 10 Information This chapter provides information about accessing the Information menu and using its features. Figure 10.0.1 shows the architecture of the Information menu. Figure 10.0.1 Information menu architecture In the main Menu, press ▲ or ▼ to scroll to Information. Then press to select it. The Information menu is displayed, as shown in Figure 10.0.2 Figure 10.0.2 Information menu 10.1 SIP Information You can get SIP Registrar and Proxy status here. 1. SIP 2. Network 3. System Select BackInformation Network SIP System Registrar Status Proxy Status Current IP Addr WLAN Status Current SSID MAC Address Channel Tx Rate ModeFirmware Version Serial Number Hardware Version
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 3110.2 Network Information Network and WLAN status can be shown here. 10.3 System Information You can get information about the Firmware Version, Serial Number and Hardware Version here.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 32Chapter 11 Profile This chapter provides information about accessing the Profile menu and using its features. In standby mode, you can press the hot key ‘ ’ to access the Profile menu. Figure 11.0.1 shows the architecture of the Profile menu. Figure 11.0.1 Profile menu architecture In the main Menu, press ▲ or ▼ to scroll to Profile and press to select it. The Profile menu is displayed, as shown in Figure 11.0.2 Figure 11.0.2 Profile menu 11.1 Key Lock In the Profile menu, select Key Lock. The key-locked screen is shown as in Figure 11.1.1. 1. Key Lock 2. Speed Dial 3. Ringer Melody Select BackProfile Speaker VolumeVibrator Ringer Melody Speed Dial Key Lock Off/on Off/on Volume 1 to 5
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 33 Figure 11.1.1 Key-locked screen You can unlock it by pressing twice. The phone will go to standby mode. 11.2 Speed Dial The Speed Dial menu allows users to dial a number from the list of placed calls. 11.3 Ringer Melody This menu allows users to turn on or off the ringer. 11.4 Vibrator This menu allows users to turn on or off the vibrator. 11.5 Speaker Volume Speaker/Receiver volume can be adjusted by choosing from Volume 1 (lowest volume) to Volume 5 (highest volume). WiFi Phone Unlock
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 34Chapter 12 Web-based Management Interface Senao SI-7800H has a Web-based management interface to provide users an easier way to configure SI-7800H. Some advanced configurations, like firmware upgrade, are only available by using this interface. 12.1 Login the Management Interface Start the IE (or other browsers) to navigate SI-7800H web management interface by entering the IP address (192.168.3.20 in the below example) of the SI-7800H in the browser’s URL field. The LOGIN window will display Username and Password as shown in Figure 12.1.1. The default Username is “admin” and no password is needed for the first time login. Figure 12.1.1 Login the Management Interface 12.2 Main Page of the Management Interface After you login the management interface, the main page will show as in Figure 12.2.1. The main page displays phone status, including WLAN status and system information. On the left side of the main page, there
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 35are six configuration items: System, LAN, Wireless, SIP, Phone Settings and Phonebook. All of these configuration items will be described in the following sections. Figure 12.2.1 Main Page of the Management Interface 12.3 System Setting Clicking the System item on the left side of the main page will bring you to the System Setting page as shown in Figure 12.3.0.1. There are six options under the system item: System Date & Time, Administrator Settings, Firmware Upgrade, Configuration Tools, Status and Reset.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 36 Figure 12.3.0.1 System Setting Page 12.3.1 System Date & Time Clicking the System Date & Time option will bring you to the System Date & Time page. You can set date, time, time zone, enable or disable daylight saving function and using SNTP servers to get time information. After finishing the configuration, click the Apply icon at the bottom of this page to active the settings or click the Cancel icon to cancel the settings. 12.3.2 Administrator Settings Clicking the Administrator Settings option will bring you to the Administrator Settings page. You can change password, change idle time out duration and enable/disable remote control function. After finishing the configuration, click the Apply icon at the bottom of this page to active the settings or click the Cancel icon to cancel the settings.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 3712.3.3 Firmware Upgrade Clicking the Firmware Upgrade option will bring you to the Firmware Upgrade page as shown in Figure 12.3.3.1. You can upgrade the firmware of SI-7800H by using a FTP server. Please enter FTP server’s IP address, user name, password and the file name of the new firmware. After finishing the configuration, click the Apply icon at the bottom of this page to start the firmware upgrading. A confirmation window (Figure 12.3.3.2) will pop up asking “Do you wish to continue with the upgrade process?” You can click ‘OK’ to continue or ‘Cancel’ to abort. If the ‘OK’ is chosen, a warning window (Figure 12.3.3.3) will pop up. Please follow the instruction in the warning window to successfully upgrade the firmware. After the firmware is upgraded successfully, the Login page will appear. You need t o turn the SI-7800H off and then turn it on to make the new firmware effective. Figure 12.3.3.1 Firmware Upgrade page
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 38 Figure 12.3.3.2 Confirmation Window Figure 12.3.3.3 Warning Window 12.3.4 Configuration Tools Clicking the Configuration Tools option will bring you to the Configuration Tools page. You can set SI-7800H back to its factory default settings in this option. 12.3.5 Status Clicking the Status option will bring you to the Status page. This page shows current status of the SI-7800H. 12.3.6 Reset Clicking the Reset option will reset the SI-7800H. 12.4 LAN Setting Clicking the LAN item on the left side of the main page will bring you to the LAN Setting page as shown in Figure 12.4.0.1. There are three options under the LAN item: Dynamic IP, Static IP and DNS.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 39 Figure 12.4.0.1 LAN Setting page 12.4.1 Dynamic IP Clicking the Dynamic IP option will bring you to the Dynamic IP page. This option allows you to enable the DHCP client function of the SI-7800H. 12.4.2 Static IP Clicking the Static IP option will bring you to the Static IP page. This option allows you to set the static IP address, subnet mask and default gateway of the SI-7800H. 12.4.3 DNS Clicking the DNS option will bring you to the DNS page. This option allows you to set the primary and secondary DNS Server’s IP address used by the SI-7800H. 12.5 Wireless Setting Clicking the Wireless item on the left side of the main page will bring you to the Wireless Setting page as shown in Figure 12.5.0.1. There is one option under the Wireless item: Setting.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 40 Figure 12.5.0.1 Wireless Setting page 12.5.1 Setting Clicking the Setting option will bring you to the Wireless Settings page. This option allows you to set all the WLAN related settings, including General, Advanced Settings, Authentication and 802.1x, of the SI-7800H. 12.6 SIP Setting Clicking the SIP item on the left side of the main page will bring you to the SIP Setting page as shown in Figure 12.6.0.1. There is one option under the SIP item: Setting.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 41 Figure 12.6.0.1 SIP Setting page 12.6.1 Setting Clicking the Setting option will bring you to the SIP Settings page. This option allows you to set all the SIP related settings, including User Information, Proxy Server, Outbound Proxy, Registrar and codec used by the SI-7800H. 12.7 Phone Settings Clicking the Phone Settings item on the left side of the main page will bring you to the Phone Setting page as shown in Figure 12.7.0.1. There is one option under the Phone Settings item: Phone Settings.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 42 Figure 12.7.0.1 Phone Settings page 12.7.1 Phone Settings Clicking the Phone Setting option will bring you to the Phone Settings page. This option allows you to set all the phone related settings, including Ringer Melody, Melody Select, Key Tone, Vibrator and Speaker Volume. 12.8 Phone Book Clicking the Phone Book item on the left side of the main page will bring you to the Phone Book page as shown in Figure 12.8.0.1. There are two options under the Phone Book item: Phone Book Edit and Call History.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 43 Figure 12.8.0.1 Phone Book page 12.8.1 Phone Book Edit Clicking the Phbook Edit option will bring you to the Phone Book Edit page. This option allows you to create, delete and browse items in the phone book. 12.8.2 Call History Clicking the Call History option will bring you to the Call History page. This option allows you to view outgoing, incoming and missed calls.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 44Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Radiation Exposure Statement: This device complies with FCC RF Exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This EUT is incompliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.
SENAO SI-7800H User’s Manual SENAO INTERNATIONAL CO., LTD. 45 Wireless Solution Provider Contact us: E-mail: sales@senao.com.tw http://www.senao.com

Navigation menu