Senao Networks CAP4200AG Wireless 802.11abgn Access Point User Manual statement rev

Download:
Mirror Download [FCC.gov]
Document ID	2113268
Application ID	fYoZkp98xmBlefVMJYKFpg==
Document Description	User manual (statement) rev
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.75kB (84392 bits)
Date Submitted	2013-11-07 00:00:00
Date Available	2014-04-03 00:00:00
Creation Date	2013-10-24 18:48:50
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-11-07 18:11:13
Document Title	User manual (statement) rev
Document Creator	Adobe InDesign CS6 (Windows)

Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Ce dispositif est conforme a la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositifne doit pas produire de brouillage prejudiciable,
et (2) ce dispositif doit accepter tout brouillage re , y compris un brouillage susceptible de provoquer un fonctionnement
indesirable.
Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz
and that these radars could cause interference and/or damage to LE-LAN devices.
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont reserves uniquement pour une utilisation a l’interieur
afin de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux;
(ii) De plus, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes
utilisateurs principaux (c.-a-d., qu’ils ont la priorite) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance 20cm between the radiator and your body.
Declaration d’exposition aux radiations:
Cet equipement est conforme aux limites d’exposition aux rayonnements IC etablies pour un environnement non controle.
Cet equipement doit @tre installe et utilise avec un minimum de 20 cm de distance entre la source de rayonnement et
votre cmps.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
ncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to indoor environment. The band
from 5600-5650MHz will be disabled by the software during the manufacturing and cannot be changed by the end user.
This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed)
Radiation Exposure Statement:
This equipment complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for
intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept
as far as possible from the user’s body or by setting the device to lower output power if such a function is available.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)
Note: The country code selection is for non-US models only and is not available to all US models. Per FCC regulations, all
Wi-Fi products marketed in the US must be fixed to US operation channels only.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2013:10:24 18:48:50+05:30
Metadata Date                   : 2013:11:07 18:11:13+08:00
Modify Date                     : 2013:11:07 18:11:13+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:ededdd9c-e71f-4d4d-a250-18c3feb16431
Original Document ID            : xmp.did:678CCAC9923CE311AE8ADAD73F4F3EB2
Document ID                     : xmp.id:FB7D32A5AE3CE31185D4AFC55C19061B
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:10:24 18:48:50+05:30
Derived From Instance ID        : xmp.iid:F97D32A5AE3CE31185D4AFC55C19061B
Derived From Document ID        : xmp.did:678CCAC9923CE311AE8ADAD73F4F3EB2
Derived From Original Document ID: xmp.did:678CCAC9923CE311AE8ADAD73F4F3EB2
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools