Senao Networks OC36600802 ZoneFlex 2741 802.11b/g Outdoor Access Point User Manual Manual

Senao Networks, Inc. ZoneFlex 2741 802.11b/g Outdoor Access Point Manual

Manual

Ruckus Wireless®ZoneFlex® 2741 802.11g Outdoor Access PointGetting Started Guidewww.ruckuswireless.com
11About This Getting Started Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Using ZoneDirector or FlexMaster to Manage the Access Point . . . . . . . . . . . . . . . . . . 12Unpacking the ZoneFlex Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Mounting Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Bottom Cover and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Prepare the Required Hardware and Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Get to Know the Access Point Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4LED Colors and What They Mean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Perform a Site Survey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Determine the Optimal Mounting Location and Orientation . . . . . . . . . . . . . . . . . . . . . 9Become Familiar with the Installation Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Configuring the Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Configuring for Management by ZoneDirector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Configuring for Standalone Operation or for Management by FlexMaster . . . . . . . . 14What You Will Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Step 1: Prepare the Administrative Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Step 2: Connect the Access Point to the Administrative Computer . . . . . . . . . . . . . 16Step 3: Log Into the Access Point’s Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Step 4: Configure the Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Step 5: Disconnect the Access Point from the Administrative Computer . . . . . . . . . 23Step 6: Restore the Administrative Computer’s Network Settings . . . . . . . . . . . . . . 235Attaching the Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25What You Will Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Contents
2Step 1: Attach the Static Bracket to the Mounting Surface . . . . . . . . . . . . . . . . . . . . . 26Attaching the Bracket to a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Attaching the Bracket to a Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Step 2: Attach the Dynamic Bracket to the Access Point . . . . . . . . . . . . . . . . . . . . . . . 31Mounting on a Flat Surface or Vertical Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Mounting on a Horizontal Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357Verifying the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Associate a Wireless Client with the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Check the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Check the TR069 Status (FlexMaster Management Only) . . . . . . . . . . . . . . . . . . . . . . . 418Joining the Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41What You Will Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Mounting on a Flat Surface or Vertical Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Mounting on a Horizontal Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449(Optional) Mounting and Connecting the External Antenna . . . . . . . . . . . . . . . . . . . . . . 4610 What to Do Next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Change the Administrative Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Configure the Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Read Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4911 Professional Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Personal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50External Entenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
11About This Getting Started GuideThis Getting Started Guide provides information on how to set up the Ruckus Wireless ZoneFlex 2741 802.11g Outdoor Access Point on your network. Topics covered in this guide include installation, basic configuration, and device mounting.This guide is intended for use by those responsible for installing and setting up network equipment. Consequently, it assumes a basic working knowledge of local area networking, wireless networking, and wireless devices.Related DocumentationIn addition to this guide, each Ruckus Wireless ZoneFlex 2741 802.11g Outdoor Access Point documentation set includes the following: ■User Guide: Provides detailed information on how to configure the Access Point. The User Guide is available for download on the Ruckus Wireless Support Web site at:http://support.ruckuswireless.com/documents■Release Notes: Provides late-breaking information about the current software release, including new features, enhancements, and known issues. If the information in the Release Notes differs from the information in this guide, follow the instructions in the Release Notes.■Online Help: Accessible from the ZoneFlex Web interface, the Online Help provides information that helps you configure the Access Point using the Web interface.Using ZoneDirector or FlexMaster to Manage the Access PointIf you are planning to use either Ruckus Wireless FlexMaster or Ruckus Wireless ZoneDi-rector to manage the Access Point, this guide describes the required steps that will enable the Access Point to report to and communicate with FlexMaster or ZoneDirector success-fully. ■To set up the Access Point for management by FlexMaster, refer to “(Optional) Set the FlexMaster Server Address” on page 22.■To set up the Access Point for management by ZoneDirector, refer to “Configuring for Management by ZoneDirector” on page 12
2Unpacking the ZoneFlex Access PointPackage Contents2Unpacking the ZoneFlex Access Point1. Open the Access Point package, and then carefully remove the contents. 2. Return all packing materials to the shipping box, and put the box away in a dry location.3. Verify that all items listed in Package Contents below are included in the package. Check each item for damage. If any item is damaged or missing, notify your authorized Ruckus Wireless sales representative.Package ContentsA complete Access Point package contains all of the items listed below:■ZoneFlex 2741 Outdoor Access Point■Box containing the PoE injector (not included in some SKUs)■Box containing the power adapter (not included in some SKUs)■Two-prong plug adapter (for three-prong wall outlet)■Mounting kit (see “Mounting Kit Contents” for details)■Bag containing bottom Access Point cover and related accessories (see “Bottom Cover and Accessories” for details)■Service Level Agreement / Limited Warranty Statement■Regulatory Statement■This Getting Started GuideWARNING: The Ruckus Wireless PoE injector and power adapter (if supplied with your Access Point) is for indoor use only. Never mount the PoE injector and power adapter outdoor with the Access Point.Mounting Kit Contents■Dynamic bracket■Static bracket■Metal plates (2 pieces)■Steel clamp■Wall anchors (2 pieces)■Hex bolts (4 pieces)■Machine screws (8 pieces)■Split lock washers (4 pieces)■Fender washers (4 pieces)
3Before You BeginPrepare the Required Hardware and ToolsBottom Cover and Accessories■Bottom cover of the Access Point■DC terminal block■Black solid rubber stoppers (2 pieces)■Black rubber O-ring ■Green rubber O-ring ■White P-clip cable clamp (2 pieces)■Machine screws (2 pieces)■Machine screws with washers (3 pieces)3Before You BeginBefore installing and setting up the Access Point, Ruckus Wireless recommends that you first complete the following pre-installation tasks.Prepare the Required Hardware and ToolsYou must supply the following tools and equipment:■A notebook computer running on Windows XP/2000 and installed with one wireless 802.11b/g network card and one Ethernet card■6mm flathead screwdriver■6mm Phillips screwdriver■10mm ratchet wrench■3mm Phillips screwdriver (if you will be using DC power)■Electric drill with 8mm drill bit (if mounting on a flat surface)NOTE: At the beginning of each procedure, this guide lists the specific tools, accessories, and equipment that you will need to complete the procedure.
4Before You BeginGet to Know the Access Point FeaturesGet to Know the Access Point FeaturesFigure 1 and Figure 2 identify the Access Point features that are relevant to the installation and mounting instructions that this guide provides. Before you begin the installation process, Ruckus Wireless recommends that you become familiar with these features.Figure 1. Access Point LEDs and bottom connectors Table 1. LEDs and bottom panel connectorsNo Label Description1 LEDs See “LED Colors and What They Mean” below for more information.2 RJ45 LAN port that supports Power over Ethernet (PoE) and 10/100Mbps network connections1234
5Before You BeginGet to Know the Access Point FeaturesLED Colors and What They MeanRefer to Tab le 2 below for all possible LED states and what they indicate.3 Reset Using a pointed object (for example, a pen), press this button to restart the Access Point or to restore it to factory default settings:• To restart the Access Point, press the Reset button once.• To restore the Access Point to factory default, press the Reset button for six (6) seconds.WARNING: Restoring the Access Point to factory default settings removes all configuration changes that you have made. These include the IP address, password, access control list, and wireless settings. Returning the configuration of these features to their factory default settings may result in network connectivity issues.4 12V DC In addition to PoE, you can also use direct current or DC (from a battery, for example) to supply power to the Access Point.Table 2. LED states and behaviorsLED MeaningOPT Not used in this modelDIR • Off: The Access Point is not being managed by ZoneDirector (standalone mode).•Green: The Access Point is being managed by ZoneDirector.•Flashing green: The Access Point is being managed by ZoneDirector, but is currently unable to communicate with ZoneDirector.Table 1. LEDs and bottom panel connectorsNo Label Description
6Before You BeginGet to Know the Access Point FeaturesAIR • Green: The Access Point is functioning as a mesh AP (MAP) and the wireless signal to its uplink MAP is good (> 24dbm).•Fast flashing green (two flashes every second): The Access Point is functioning as a mesh AP (MAP) and the wireless signal to its uplink MAP is poor (< 24dbm).•Slow flashing green (one flash every two seconds): Mesh networking is enabled, but the Access Point cannot find a mesh uplink.•Off: The Access Point is operating in standalone mode or, if mesh networking is enabled, the Access Point is functioning as a root AP (RAP).WLAN • Green: The wireless LAN (WLAN) service is up and at least one wireless client is associated with it. If mesh networking is enabled, there are no downlink MAPs connected to this Access Point. •Fast flashing green (two flashes every second): The WLAN service is up and at least one wireless client is associated with it. Mesh networking is enabled and at least one downlink MAP is connected to this Access Point.•Slow flashing green (one flash every two seconds): The WLAN service is up, but no wireless clients are currently associated with it. Mesh networking is enabled and at least one downlink MAP is connected to this Access Point.•Off: Either the WLAN is down, or it is up but no wireless clients are currently associated with it. If mesh networking is enabled, there are no downlink MAPs connected to this Access Point.LAN • Green: The LAN port is connected to a 10/100Mbps device.•Flashing green: Traffic is passing through the LAN port. •Off: The LAN port is not connected to any network device.Table 2. LED states and behaviorsLED Meaning
7Before You BeginGet to Know the Access Point FeaturesIf you want to extend the range of your wireless network, you can connect an external high gain antenna to the standard N-type radio frequency (RF) antenna connector on the top panel of the Access Point. The antenna must have a gain of less than 9dBi to comply with FCC and CE regulations. If you are connecting an external antenna to the Access Point, refer to “(Optional) Mounting and Connecting the External Antenna” on page 46 for more information.Figure 2. The antenna connector is protected by a black waterproof antenna connector coverPWR • Green: The Access Point is connected to a power source.•Off: No power is available, or the Access Point is not connected to a power source.Table 2. LED states and behaviorsLED Meaning
8Before You BeginPerform a Site SurveyPerform a Site SurveyBefore installing the Access Point, perform a site survey to determine the optimal Access Point placement or maximum range, coverage, and network performance. When performing a site survey, consider the following factors:■Data rates: Range is generally inversely proportional to data rates. The maximum radio range is achieved at the lowest workable data rate. Higher data rates will generally be achieved at closer distances.■Antenna type and placement: Proper antenna configuration is a critical factor in maximizing radio range. As a general rule, radio range is increased by mounting the radio higher off of the ground with the Access Point oriented so that the dome is facing down (for recommended orientation examples, refer to Figure 3 on page 9). If you are connecting an external antenna to the Access Point, mount the Access Point so that the external antenna is pointing down.■Physical environment: Clear or open areas provide better radio range than closed or filled areas. The less cluttered the operating environment, the greater the wireless range.■Obstructions, building materials, and sources of interference: Physical obstructions, such as concrete pillars, steel beams, filing cabinets, buildings, or trees, can block or hinder wireless communication. Avoid installing the Access Point in a location where there is an obstruction between sending and receiving devices. A number of machines and electronic devices that emit radio waves – cranes, wireless phones, microwave ovens, satellite dishes – interfere with and block wireless signals. Building materials used in construction also influence radio signal penetration. For example, drywall construction permits greater range than concrete blocks. For more Access Point placement guidelines, refer to “Determine the Optimal Mounting Location and Orientation”.
9Before You BeginDetermine the Optimal Mounting Location and OrientationDetermine the Optimal Mounting Location and OrientationThe location and orientation that you choose for the Access Point play a critical role in the performance of your wireless network. In general, Ruckus Wireless recommends installing the Access Point away from obstructions and sources of interference and ensuring that the Access Point’s dome is pointing to the general direction of its wireless clients.Figure 3 illustrates mounting locations and access point orientations Ruckus Wireless recommends. Figure 3. Recommended mounting locations and orientations
10Before You BeginDetermine the Optimal Mounting Location and OrientationFigure 4 illustrates mounting locations and access point orientations that should be avoided. Figure 4. Not recommended mounting locations and orientations
11Before You BeginBecome Familiar with the Installation ComponentsBecome Familiar with the Installation ComponentsThe Access Point can be installed in an indoor or outdoor environment, such as an interior wall or ceiling or the exterior roof overhang of a building or a streetlight pole. Refer to Figure 5 for the installation components involved in a typical installation. Take note of the components that must be installed indoor and outdoor. The PoE injector and power adapter that are shipped with the Access Point are for indoor use only. Ruckus Wireless also strongly recommends that you form a drip loop on any cable that is connected to devices that are installed outdoor (for example, the Access Point and the Ethernet surge protector).Figure 5. Typical installation components using PoE as the only power sourceWARNING: Only trained and qualified personnel should be allowed to install, replace, or service this equipment.OUTDOORINDOORAccess PointEthernet Surge ProtectorPoE InjectorRouter or SwitchPower AdapterDrip Loop
12Configuring the Access PointConfiguring for Management by ZoneDirectorWARNING: Installation of the equipment must comply with local and national electrical codes.CAUTION: Make sure that you form a 3”-5” drip loop in any cable that is attached to the Access Point and Ethernet surge protector. This will prevent water from running along the cables and entering the Access Point, Ethernet surge protector, or the building where the cables terminate.CAUTION: Be sure that grounding is available and that it meets local and national electrical codes. For additional lightning protection, use lightning rods, lightning arrestors, or surge suppressors..WARNING: The Ruckus Wireless PoE injector (if supplied with your Access Point) is for indoor use only. Never mount the PoE injector outdoor with the Access Point.NOTE: If the power outlet in your installation environment is three-pronged, use the two-prong plug adapter that is shipped with the Access Point.4Configuring the Access PointThe procedure for completing the Access Point’s essential configuration depends on whether you want it to be managed by either ZoneDirector or FlexMaster or to operate as a standalone access point. Refer to the section that is relevant to your deployment:■Configuring for Management by ZoneDirector■Configuring for Standalone Operation or for Management by FlexMasterConfiguring for Management by ZoneDirectorIf ZoneDirector is installed on the network, you can configure the Access Point for management by ZoneDirector. Simply connect the Access Point to same Layer 2 subnet as ZoneDirector. When the Access Point starts up, it will discover and register with ZoneDirector automatically.
13Configuring the Access PointConfiguring for Management by ZoneDirectorNOTE: In addition to using Layer 2 auto discovery to enable the Access Point to register with ZoneDirector, you can also use DHCP Option 43 or DNS. For more information, refer to the ZoneDirector User Guide.CAUTION: If you use this method, make sure that you do not change the IP address of ZoneDirector after the AP discovers and registers with it. If you change the ZoneDirector IP address, the AP will no longer be able to communicate with it and will be unable to rediscover it.Before starting this procedure, check the back panel of the Access Point (above the recess where the bottom connectors are located), and then write down the MAC address of the Access Point. You will need the MAC address to identify the Access Point on the ZoneDi-rector Web interface.1. Connect the Access Point to the same Layer 2 subnet as ZoneDirector. The same Layer 2 subnet means that there should not be any router between the Access Point and ZoneDirector.2. Power on the Access Point.3. Log into ZoneDirector, and then go to the Monitor > Access Points page.4. Look for the MAC address of the Access Point, and then check its Status column. • If automatic approval is enabled, the Status column should show Connected. • If automatic approval is disabled, click the Allow link that is on the same row as the Access Point’s MAC address. This allows the Access Point to register with ZoneDi-rector.When the Status column shows Connected, this indicates that the Access Point has successfully registered with ZoneDirector and that it can now be moved to its destina-tion Layer 2 or Layer 3 network.5. Continue to “Attaching the Mounting Brackets” on page 25.
14Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMasterConfiguring for Standalone Operation or for Management by FlexMasterWhat You Will NeedBefore starting with the configuration task, make sure that you have the following require-ments ready:■An administrative computer (notebook computer) running on Microsoft Windows Vista/XP/2000■Mozilla Firefox 2.0 (or later) or Microsoft Internet Explorer 6.0 (or later) installed on the administrative computer■One Cat5e UTP (outdoor-rated) solid cable■One Ethernet cable■PoE injector (if not supplied with the Access Point, you can purchase a third party 802.3af-compliant PoE injector or switch)■6mm Phillips screwdriverIf you are planning to power the Access Point using a 12v DC connection, you will also need the following:■UL1185 (80°, 300V) single shielded DC cable■12v DC, 1A DC power source (for example, a battery)■3mm Phillips screwdriverStep 1: Prepare the Administrative ComputerNOTE: The following procedure is applicable if the administrative computer is running on Windows XP or Windows 2000. If you are using a different operating system, refer to the documentation that was shipped with your operating system for information on how to modify the computer’s IP address settings.1. On your Windows XP or Windows 2000 computer, open the Network Connections (or Network and Dial-up Connections) control panel according to how the Start menu is set up: • On Windows XP, click Start > Control Panel > Network Connections.• On Windows 2000, click Start > Settings > Network Connections.2. When the Network Connections window appears, right-click the icon for Local Area Connection, and then click Properties.
15Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMasterNOTE: Make sure that you configure the Local Area Connection properties, not the Wireless Network Connection properties.3. When the Local Area Connection Properties dialog box appears, select Internet Protocol (TCP/IP) from the scrolling list, and then click Properties. The Internet Protocol (TCP/IP) Properties dialog box appears. 4. Write down all of the currently active network settings. You will need this information later when you restore your computer to its current network configuration.5. Click Use the following IP address, and then configure the IP address settings with the values listed in Tabl e 3. For a sample configuration, refer to Figure 6.You can leave the Alternate DNS server box blank.6. Click OK to save your changes and close the TCP/IP Properties dialog box.7. Click OK again to close the Local Area Connection Properties dialog box.Windows saves the IP address settings that you have configured.Table 3. Configure your computer’s IP address settingsIP address 192.168.0.22 (or any address in the 192.168.0.x network—with the exception of 192.168.0.1, which is already used by the Access Point)Subnet mask 255.255.255.0Default gateway 192.168.0.1Preferred DNS server 192.168.0.1
16Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMasterFigure 6. Sample configuration in the Internet Protocol (TCP/IP) Properties dialog boxStep 2: Connect the Access Point to the Administrative ComputerThe procedure for connecting the Access Point to the administrative computer depends on the power source that you will be using. You can do one of the following:■Use Power Over Ethernet■Use DC PowerNOTE: You only need to connect one type of power source at this point, even if you are planning to use both PoE and DC power in your final deployment.Use Power Over Ethernet1. Take out the PoE injector and the power adapter from the Access Point package.2. Connect one end of an Ethernet cable to the 10/100 DATA IN port on the PoE injector, and then connect the other end to the administrative computer’s Ethernet port.3. Connect one end of the other Ethernet cable to the PoE Out port on the PoE injector, and then connect the other end to the RJ45 port on the Access Point.
17Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMaster4. Connect the power jack to the DC 48V IN connector on the PoE injector, and then plug the power adapter to a power source. Verify that the PWR LED on the back of the Access Point is steady green.NOTE: If the power outlet in your installation environment is three-pronged, use the two-prong plug adapter that is shipped with the Access Point.Figure 7. Connect the Ethernet cables and power adapter to the PoE injectorYou have completed connecting the Access Point to the administrative computer and to a PoE power source.Use DC PowerTo use DC to power the Access Point, you need to connect a DC cable (not supplied with the Access Point) to the DC terminal block.1. Connect one end of an Ethernet cable to the RJ45 port on the Access Point, and then connect the other end to the administrative computer’s Ethernet port.2. Take out the DC terminal block from the small plastic bag that contains the bottom cover of the Access Point.3. Connect the DC cable’s ground wire to V- terminal. If you are looking at the terminal block with the wiring terminal screws on top, the V- terminal is on the left side.4. Connect the DC cable’s +12v DC wire to the V+ terminal. If you are looking at the terminal block with the wiring terminal screws on top, the V+ terminal is on the right side.To A C Power SourceTo Access PointTo Admin Computer
18Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMasterFigure 8. Connect the ground wire to the V- terminal and the +12v DC wire to the V+ terminal5. Using a 3mm Phillips screw, tighten the wiring terminal screws.6. Connect the DC terminal block to the 12V DC port on the Access Point.7. Connect the DC cable to a DC power source (for example, a battery).You have completed connecting the Access Point to the administrative computer and to a DC power source.Step 3: Log Into the Access Point’s Web Interface1. On the administrative computer, open a Web browser window.2. In the address or location bar, type the following address:https://192.168.0.13. Press <Enter> on the keyboard to connect to the Access Point’s Web interface. A security alert message appears.4. Click Yes or OK (depending on the browser) to continue. The Access Point’s login page appears.Ground Wire to V- Terminal 12V DC Wire to V+ Terminal
19Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMasterFigure 9. The ZoneFlex Access Point login page5. In User name, type super.6. In Password, type sp-admin.7. Click Log In. The Web interface appears, displaying the Device page.8. Continue to “Step 4: Configure the Wireless Settings” below.Step 4: Configure the Wireless SettingsTo complete this step, you will need to configure the settings on the Common tab and at least one Wireless # tab. These are the essential wireless settings that will enable wireless devices on the network to associate with the Access Point. For your reference, the default wireless settings on the Access Point are listed in Tab l e 4.Table 4. Default wireless settingsSetting Default ValueSSID (network name) Wireless 1 to Wireless 8 (8 WLANs)Encryption (security) Disabled on all WLANsDefault management IP address 192.168.0.1
20Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMasterConfigure Common Wireless Settings1. On the left menu of the Web interface, click Configuration > Wireless. The Common page appears.2. Verify that the common wireless settings are configured as listed in Table 5.3. If you made any changes to the Common tab, click Update Settings.4. Continue to “Configure Wireless # Settings” below.Figure 10. The Configuration > Wireless > Common tabTable 5. Common wireless configurationSetting Recommended ValueWireless Mode Auto-selectChannel SmartSelectCountry Code • If you purchased the Access Point in the United States, this value is fixed to United States at the factory and is not user configurable.• If you purchased the Access Point outside the United States, verify that the value is set to your country or region. Selecting the correct country code ensures that the Access Point uses only the radio channels allowed in your country or region.
21Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMasterConfigure Wireless # Settings1. Click one of the Wireless # tabs.2. In Wireless Availability, click Enabled.3. In Broadcast SSID, click Enabled.4. Clear the SSID box, and then type a unique and descriptive name that you want to call this wireless network. For example, you can type Ruckus Wireless AP. This SSID is the name that will help users identify this wireless network in their wireless network connection applica-tion.NOTE: You may also configure other wireless settings on this and other Wireless # tabs (in addition to the settings described above), although it is not necessary for completing the Access Point installation.5. Click Update Settings.You have completed configuring the basic wireless settings of the Access Point.Figure 11. The Configuration > Wireless > Wireless 1 tab
22Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMaster(Optional) Set the FlexMaster Server AddressIf you have a FlexMaster server installed on the network and you intend to use FlexMaster to manage the Access Point, you can set the FlexMaster server address at this point. Before starting this procedure, make sure you obtain the correct FlexMaster server URL.NOTE: In addition to setting the FlexMaster server URL manually on the Access Point, you can also use DHCP Option 43 or DNS to point the Access Point to the FlexMaster server. For more information, refer to the FlexMaster User Guide.1. On the menu, click Administration > Management.2. Scroll down the page to the TR069 / SNMP Management Choice section.3. Verify that the Auto option is selected.4. In FlexMaster Server URL, type the URL of the FlexMaster server on the network. You can use either http or https to connect to the URL and include either the host name or IP address of the FlexMaster server in the URL. The following are examples of valid FlexMaster server URLs:http://flexmaster/intune/serverhttps://flexmaster/intune/serverhttp://192.168.20.1/intune/serverhttps://192.168.20.1/intune/server5. Click Update Settings to save your changes.You have completed setting the FlexMaster server address on the Access Point.
23Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMasterFigure 12. Type the FlexMaster server URLNOTE: Instructions on how to verify that the Access Point and FlexMaster can communi-cate with each other are provided in “Check the TR069 Status (FlexMaster Management Only)” on page 41.Step 5: Disconnect the Access Point from the Administrative ComputerYou are now ready to attach the mounting brackets to the mounting surface and to the Access Point. Before continuing, make sure that you disconnect the Access Point from the power source and from the administrative computer.1. Disconnect the power adapter of the PoE injector from the power source.2. Verify that the PWR LED on the back of the Access Point is off.3. Disconnect the Ethernet cable from the administrative computer’s Ethernet port.Step 6: Restore the Administrative Computer’s Network Settings1. On your Windows XP or Windows 2000 computer, open the Network Connections (or Network and Dial-up Connections) control panel according to how the Start menu is set up: • On Windows XP, click Start > Control Panel > Network Connections.
24Configuring the Access PointConfiguring for Standalone Operation or for Management by FlexMaster• On Windows 2000, click Start > Settings > Network Connections.2. When the Network Connections window appears, right-click the icon for Local Area Connection, and then click Properties.3. When the Local Area Connection Properties dialog box appears, select Internet Protocol (TCP/IP) from the scrolling list, and then click Properties. The TCP/IP Properties dialog box appears. 4. Restore the computer’s network settings by typing the original IP address settings in the TCP/IP Properties dialog box.5. On the TCP/IP Properties dialog box, click OK to close it.6. Click OK again to close the Local Area Connection Properties dialog box.
25Attaching the Mounting BracketsWhat You Will Need5Attaching the Mounting BracketsWhat You Will NeedTo complete this procedure, you will need the following items:■Static bracket■Dynamic bracket■Wall anchors■Fender washers■Hex nuts■10mm ratchet wrenchIf you are mounting the Access Point on a flat surface, you will also need an electric drill with an 8mm drill bit.If you are mounting the Access Point on a pipe or pole, you will also need the following:■A 30mm to 60 mm (1.18 in. to 2.36 in.) pipe or pole■Steel clamp■10mm flathead screwdriver For mounting on a horizontal pole, you will need the two metal bars that are supplied with the Access Point.NOTE: Do not mount the Access Point after you finish attaching the mounting brackets. Ruckus Wireless strongly recommends that you first connect the Access Point to the network, and then test it first before finally mounting it to your desired location.
26Attaching the Mounting BracketsStep 1: Attach the Static Bracket to the Mounting SurfaceStep 1: Attach the Static Bracket to the Mounting SurfaceThe procedure for attaching the bracket to the mounting surface depends on whether you are mounting the Access Point to a flat surface or a pole.■Attaching the Bracket to a Flat Surface■Attaching the Bracket to a PoleAttaching the Bracket to a Flat SurfaceWARNING: Ruckus Wireless strongly recommends that you wear eye protection before drilling holes on the mounting surface.NOTE: The wall anchors that are supplied with the Access Point are for mounting on solid masonry walls only. If you are mounting the Access Point on other materials (for example, drywall, wood, or hollow cinder block), you will need the appropriate types of wall anchors. Check your local hardware store for options.1. Place the static bracket at the exact location on the mounting surface where you want to mount it.2. Use the static bracket as a template to mark the locations of the mounting holes on the two mounting tabs.Figure 13. Mark the locations of the mounting holeso
27Attaching the Mounting BracketsStep 1: Attach the Static Bracket to the Mounting Surface3. Remove the static bracket from the mounting surface.4. Drill an 8mm-diameter hole with a depth of 36mm-38mm into each of the markings that you made on the mounting surface.5. Insert a wall anchor (with the unthreaded part first) into each of the holes that you drilled.6. Place a fender washer on each screw.7. Align the two screw holes on the bracket with the wall anchors that you inserted earlier.Figure 14. Align the screw holes on the bracket with the wall anchors8. Use two hex nuts to attach the bracket to the mounting surface.
28Attaching the Mounting BracketsStep 1: Attach the Static Bracket to the Mounting SurfaceFigure 15. Use hex nuts to attach the bracket to the surface9. Using a 10mm open-end wrench, tighten the nuts to secure the bracket to the mounting surface. As you tighten the nuts, the metal cones that are built into the wall anchors will expand and lock the wall anchors into place.10. Continue to “Step 2: Attach the Dynamic Bracket to the Access Point”.Attaching the Bracket to a PoleThe Access Point can be mounted vertically or horizontally on a 30mm to 60mm (1.18 in. to 2.36 in.) pole.1. Insert the open end of the steel clamp into the two tabs on the bracket.
29Attaching the Mounting BracketsStep 1: Attach the Static Bracket to the Mounting SurfaceFigure 16. Insert the steel clamp into the tabs on the bracket2. Use the clamp to attach the bracket to the pole.
30Attaching the Mounting BracketsStep 1: Attach the Static Bracket to the Mounting SurfaceFigure 17. Use the clamp to attach the bracket to the pole
31Attaching the Mounting BracketsStep 2: Attach the Dynamic Bracket to the Access Point3. Using a 10mm flathead screwdriver, tighten the clamp lock to secure the bracket to the pole.Figure 18. Tighten the clamp lock to secure the bracket4. Continue to “Step 2: Attach the Dynamic Bracket to the Access Point”.Step 2: Attach the Dynamic Bracket to the Access PointThe procedure for attaching the dynamic bracket to the Access Point depends on whether you are mounting the Access Point on a flat surface/vertical pole or on a horizontal pole. If you are mounting the Access Point on a horizontal pole, you will need to install the two metal bars that are supplied with the Access Point.Mounting on a Flat Surface or Vertical Pole1. Place the dynamic bracket onto the flat side of the Access Point so that the four screw holes on the bracket align with the four screw holes on the Access Point. Make sure that the shorter end of the mounting bracket is on the same side as the antenna connector.2. Insert four machine screws (supplied with the Access Point) into the screw holes.3. Tighten the four machine screws using a 6mm Phillips screwdriver.
32Attaching the Mounting BracketsStep 2: Attach the Dynamic Bracket to the Access PointFigure 19. Tighten the four machine screws to fasten the bracket to the Access Point4. Continue to “Connecting to the Network” on page 35.Mounting on a Horizontal Pole1. Place the two metal plates horizontally on the flat side of the Access Point, as shown in Figure 1. Make sure that the screw holes on the metal plates align with the screw holes on the Access Point.2. Insert and fasten a machine screw (supplied) into each of the four screw holes.
33Attaching the Mounting BracketsStep 2: Attach the Dynamic Bracket to the Access PointFigure 20. Position and fasten the metal plates to the Access Point3. Place the dynamic bracket on top of the metal plates. Make sure that:• The screw holes on the bracket align with the remaining screw holes on the metal plates.• The curved mounting hole is on the same side as the LEDs.4. Insert and fasten a machine screw (supplied) into each of the four screw holes.
34Attaching the Mounting BracketsStep 2: Attach the Dynamic Bracket to the Access PointFigure 21. Use machine screws to fasten the bracket to the metal plates5. Continue to “Connecting to the Network”.
35Connecting to the NetworkStep 2: Attach the Dynamic Bracket to the Access Point6Connecting to the NetworkFor guidance on the connections required for typical installations, refer to Figure 22. Figure 22. Typical installation components using PoE as the only power sourceWARNING: Do not apply power to the Access Point until you finish connecting all other components.1. Verify that the RJ45 port on the AP is connected to the PoE OUT port on the PoE injector. 2. Connect the Ethernet cable from the 10/100 DATA IN port on PoE injector to your network router or switch.3. Apply power to the Access Point.4. Continue to “Attaching the Mounting Brackets”.5. Connect one end of the other Ethernet cable to the PoE OUT port on the PoE injector, and then connect the other end to the RJ45 port on the Access Point.OUTDOORINDOORAccess PointEthernet Surge ProtectorPoE InjectorRouter or SwitchPower AdapterDrip Loop
36Connecting to the NetworkStep 2: Attach the Dynamic Bracket to the Access Point6. Connect the power jack to the DC 48V IN connector on the PoE injector, and then plug the power adapter to a power source. Verify that the PWR LED on the back of the Access Point is steady green.Figure 23. Connect the Ethernet cables and power adapter to the PoE injector7. Wrap the white P-clip cable clamp around the Ethernet cable, and then fasten it to the Access Point chassis using one of the short machine screws supplied with the Access Point.8. Wrap the black rubber O-ring around the Ethernet cable, and then place the wrapped section into the left cable groove. The black rubber O-ring can support 5.6mm to 6.0mm cable.To A C Power SourceTo Access PointTo Admin Computer
37Connecting to the NetworkStep 2: Attach the Dynamic Bracket to the Access PointFigure 24. Install the white P-clip clamp and the black rubber O-ring9. (Optional) Connect a DC cable (not supplied with the Access Point) into the DC terminal block.WARNING: Do not connect the DC cable to the DC power source at this point. You will connect it later after you finish mounting the Access Point.a. Take out the DC terminal block from the small plastic bag that contains the bottom cover of the Access Point.b. Connect the ground wire to V- terminal. If you are looking at the terminal block with the wiring terminal screws on top, the V- terminal is on the left side.c. Connect the +12v DC wire to the V+ terminal. If you are looking at the terminal block with the wiring terminal screws on top, the V+ terminal is on the right side.Rubber O-ringP-clip Cable Clamp
38Connecting to the NetworkStep 2: Attach the Dynamic Bracket to the Access PointFigure 25. Connect the ground wire to the V- terminal and the +12v DC wire to the V+ terminald. Using a 3mm Phillips screw, tighten the wiring terminal screws.e. Wrap the white P-clip cable around the DC cable, and then fasten it to the Access Point chassis using one of the short machine screws supplied with the Access Point.f. Wrap the green rubber O-ring around the DC cable, and then place the wrapped section into the right cable groove.Ground Wire to V- Terminal 12V DC Wire to V+ Terminal
39Connecting to the NetworkStep 2: Attach the Dynamic Bracket to the Access PointFigure 26. Install the white P-clip clamp and the black rubber O-ringCAUTION: If you are not connecting the DC cable to the DC terminal block, make sure you cover the right cable groove with one of the supplied solid rubber stoppers.10. Place the bottom cover of the Access Point onto the bottom section, and then fasten it using the three machine screws that are supplied with the Access Point.CAUTION: Before installing the bottom cover, verify that the perimeter rubber gasket on the underside of the cover is clear of debris.Rubber O-ringP-clip Cable Clamp
40Verifying the InstallationAssociate a Wireless Client with the Access PointFigure 27. Fasten the bottom cover using three machine screwsYou have completed connecting the Access Point to the administrative computer and a power source.7Verifying the InstallationRuckus Wireless strongly recommends that you verify that the Access Point is operating correctly and that wireless clients are able to associate with it before you mount the unit. Perform the following tasks to verify the installation.Associate a Wireless Client with the Access Point1. On the administrative computer, verify that the wireless interface is enabled. On Windows XP, click All Programs > Connect To > Wireless Network Connection to enable the wireless interface.2. In the system tray, right-click the (Wireless Network Connection) icon, and then click View Available Wireless Networks. 3. In the list of available wireless network, click the network with the same SSID as you configured in “Configure Wireless # Settings” on page 21. For example, if you set the SSID to Ruckus Wireless AP, click the wireless network named Ruckus Wireless AP.
41Joining the Mounting BracketsCheck the LEDs4. Click Connect.Your wireless client connects to the wireless network. After the wireless client connects to the wireless network successfully, the wireless client icon in the system tray changes to .Check the LEDsPerform a spot-check using the LEDs to verify that the Access Point is operating normally. If the Access Point is operating normally and your wireless client was able to associate with it: ■The PWR LED is green.■The LAN LED is green, and if traffic if passing through, it flashes green. Open a Web browser window, type www.ruckuswireless.com in the address bar, and then press <Enter>. The LAN LED should flash green as your wireless client connects to the Ruckus Wireless Web site through the Access Point.■The WLAN LED is green. This indicates that at least one wireless client is connected to the Access Point’s WLAN service.■If you do not have Ruckus Wireless ZoneDirector on the network, the DIR LED is off. This indicates that the Access Point is operating in standalone mode. If there is a ZoneDirector device on the network, the DIR LED is green.Check the TR069 Status (FlexMaster Management Only)If you configured the Access Point to report to a FlexMaster server on the network, make sure you verify that it can successfully communicate with the FlexMaster server. You can do this by checking the TR069 status on the Access Point’s Web interface.1. Log in to the Access Point’s Web interface.2. Go to the Administration > Management page.3. Scroll down to the TR069 Status section.4. Check the value for Last successful contact. If it shows a date in green, this indicates that the Access Point was able successfully communicate with FlexMaster.8Joining the Mounting BracketsWhat You Will Need■Hex bolts■10mm ratchet wrench
42Joining the Mounting BracketsMounting on a Flat Surface or Vertical PoleMounting on a Flat Surface or Vertical Pole1. Join the two brackets as shown in Figure 28. Make sure that:• The dynamic bracket (attached to the Access Point) encloses the static bracket (attached to the mounting surface).• The side of the Access Point with the antenna connector is at the bottom, especially if you are planning to install an external antenna.Figure 28. Join the two brackets2. Align the mounting holes on the dynamic bracket with the mounting holes on the static bracket.3. Place a split lock washer, and then a flat washer onto a hex bolt. Then insert the hex bolt into one of the mounting holes. NOTE: Make sure the screw-washer assembly is in correct order. The split-lock washer should be in the middle and the flat washer should touch the bracket.4. Repeat Step 3 for each of the mounting holes. There are four mounting holes on the bracket – two on each side.
43Joining the Mounting BracketsMounting on a Flat Surface or Vertical PoleFigure 29. Insert hex bolts into the mounting holes5. Finger tighten the hex bolts.6. Adjust the Access Point to your desired orientation. NOTE: If you have not yet determined the optimal orientation for your Access Point, refer to “Determine the Optimal Mounting Location and Orientation” on page 9 for orientation guidelines.7. Using a 10mm ratchet wrench, tighten the hex bolts to fix the Access Point’s orientation.You have completed mounting the Access Point on a flat surface or vertical pole.
44Joining the Mounting BracketsMounting on a Horizontal PoleMounting on a Horizontal Pole1. Join the two brackets as shown in Figure 30. Make sure that:• The dynamic bracket (attached to the Access Point) encloses the static bracket (attached to the mounting surface).• The side of the Access Point with the antenna connector is at the bottom, especially if you are planning to install an external antenna.Figure 30. Join the two brackets2. Align the mounting holes on the dynamic bracket with the mounting holes on the static bracket.3. Place a split lock washer, and then a flat washer onto a hex bolt. Then insert the hex bolt into one of the mounting holes. NOTE: Make sure the screw-washer assembly is in correct order. The split-lock washer should be in the middle and the flat washer should touch the bracket.4. Repeat Step 3 for each of the mounting holes. There are four mounting holes on the bracket – two on each side.
45Joining the Mounting BracketsMounting on a Horizontal PoleFigure 31. Insert hex bolts into the mounting holes5. Finger tighten the hex bolts.6. Adjust the Access Point to your desired orientation.NOTE: If you have not yet determined the optimal orientation for your Access Point, refer to “Determine the Optimal Mounting Location and Orientation” on page 9 for a list of guidelines.7. Using a 10mm ratchet wrench, tighten the hex bolts to fix the Access Point’s orientation.You have completed mounting the Access Point on a horizontal pole.
46(Optional) Mounting and Connecting the External AntennaMounting on a Horizontal Pole9(Optional) Mounting and Connecting the External AntennaIf you want to extend the range of your wireless network, you can connect a 2.4GHz-5GHz, 9dBi (or lower) external antenna to the standard N-type female connector on the Access Point.WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this equipment.WARNING: Before connecting the antenna to the Access Point, make sure that you disconnect the Access Point from the power source.1. Disconnect the Access Point from the power source.2. Remove the black waterproof antenna cover from the antenna connector. Put the antenna cover in a safe place, in case you need it later.3. Connect the antenna to the standard N-type female antenna connector.If the antenna comes with an RF coaxial cable (for example, a patch antenna), do the following:a. Physically mount the antenna on your desired location, preferably on the same supporting mounting structure as the Access Point.b. Connect the RF coaxial cable to the standard N-type female connector on the Access Point.
47(Optional) Mounting and Connecting the External AntennaMounting on a Horizontal PoleFigure 32. Connect the RF coaxial cable to the standard N-type female connector on the Access Point.If the antenna comes with a standard N-type male connector for direct connection (for example, an omnidirectional antenna), connect the standard N-type male connector to the standard N-type female connector on the Access Point.
48(Optional) Mounting and Connecting the External AntennaMounting on a Horizontal PoleFigure 33. Connect the standard N-type male connector to the standard N-type female connector on the Access Point4. Apply weatherproofing tape to the antenna connector to help prevent water from entering the connector.5. Reconnect the Access Point to the power source.
49What to Do NextChange the Administrative PasswordCAUTION: If you are not connecting an external antenna to the standard N-type antenna interface on the Access Point, make sure that the waterproof antenna cover remains installed to protect the interface from elements, such as water or dirt.You have completed connecting the external antenna to the Access Point.10 What to Do NextThe following are some of the post-installation tasks that Ruckus Wireless recommends. Refer to the ZoneFlex 2741 802.11g Outdoor Access Point User Guide for more information on configuring and managing the Access Point.Change the Administrative PasswordManagement access to the Web interface of the Access Point is controlled through administrative user name and password. Make sure you change the default administrative user name and password as soon as you complete the Access Point setup. This will help prevent unauthorized users from logging in to the Access Point’s Web interface and changing the access point settings to compromise your network.Configure the Security SettingsUnlike wired networks, anyone with a compatible wireless adapter can receive wireless data transmissions from your network well beyond your walls. To prevent unauthorized users from entering your wireless network and accessing your computers and files, Ruckus Wireless strongly recommends enabling and configuring wireless security on the Access Point. The Access Point supports several types of encryption and authentication methods to help prevent unauthorized access to your wireless network.Read Related DocumentationIf you are using FlexMaster or ZoneDirector to manage the Access Point, make sure you read the accompanying documentation to learn how to configure and manage the Access Point from the FlexMaster and ZoneDirector Web interface. The latest versions of Ruckus Wireless product documentation are available for download on the Ruckus Wireless Support Web site at:http://support.ruckuswireless.com/documents
50Professional Installation InstructionsPersonal Installation11 Professional Installation InstructionsPersonal InstallationThis product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting.Installation LocationThe product shall be installed at a location where the radiating antenna can be kept 20 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement.External EntennaUse only the antennas which have been approved by Ruckus Wireless. The non-approvedantenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC limit and is prohibited. Installation ProceduresPlease refer to user’s manual for the detail.WarningPlease carefully select the installation position and make sure that the final output power does not exceed the limit set force in US Rule CFR 47 part 15 section 15.247 & 15.407. The violation of the rule could lead to serious federal penalty.
Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This equipment shall not be colocated with any other transmitter. Harmful Interference Notice This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the user's authority to operate this equipment. External Antenna This device has been designed to operate with a patch antenna, and having a maximum gain of 9 dBi. Other antennatypes or having a gain greater than 9 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Industry Canada Statement This device complies with Industry Canada ICES-003 and RSS210 rules. Operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes NMB003 et RSS210 d'Industrie Canada. Le fonctionnement est soumis aux conditions suivantes : 1. Ce périphérique ne doit pas causer d'interférences; 2. Ce périphérique doit accepter toutes les interférences reçues, y compris celles qui risquent d'entraîner un fonctionnement indésirable. Australia Statement This device complies with the ACMA requirements for a Wi-Fi device namely Radio Communications (Low Impact Potential Devices) Class Licence 2000 Amd. 1:2007 and Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2003. The equipment complies with the ACMA requirements for radiation exposure for a "general user/non-aware user". This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This equipment complies with the Australian safety requirements and should only used with the specified power adapter carrying a C-tick N136 and Electrical Approval Number V06649. European Union Notices Compliance Information for 2.4-GHz Wireless Products The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC: • Radio: EN 300 328 • EMC: EN 301 489-1, EN 301 489-17 • Safety: EN 60950, EN 50385 National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci-dessous: Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttive EU 1999/5/EC) senza nessuna limitazione, eccetto per i paesii menzionati di seguito: Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der EU Direktive 1999/5/CE folgen) mit Außnahme der folgenden aufgeführten Staaten: France In case the product is used outdoors, the output power is restricted in some parts of the band. See the table below or check http://www.arcep.fr/ for more details. Dans la cas d’une utilisation en extérieur, la puissance de sortie est limitée pour certaines parties de la bande. Reportezvous à la table 1 ou visitez http://www.arcep.fr/ pour de plus amples détails. Location Frequency Range (MHz) Power (EIRP) Indoor (No restrictions) 2400-2483.5 100 mW (20 dBm) Outdoor 2400-2454 [2454-2483.5] 100 mW (20 dBm) [10 mW(10 dBm)] Italy This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless operating within the boundaries of the owner’s property, the use of this 2.4 GHz Wireless LAN product requires a ‘general authorization’. Please check with http://www.comunicazioni.it/ for more details. Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all’interno del proprio fondo, l’utilizzo di prodotti Wireless LAN a 2.4 GHz richiede una "Autorizzazione Generale". Consultare http://www.comunicazioni.it/ per maggiori dettagli.Belgium The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for more details. Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens. Les liaisons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mètres doivent être notifiées à l’Institut Belge des services Postaux et des Télécommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples détails.
Taiwan Statement The control, adjustment and on/off operation of this device does not violate the “Administrative regulations on low power radio waves radiated devices”. Any adjustments to the device should be carried out or be monitored by a specialist who has expertise on radio frequency devices. Replacement of components which may lead to the violation to the regulations is not allowed. Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices. The low power radio-frequency device shall not influence aircraft security and interfere with legal communications; if found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must not be susceptible with the interference from legal communications or ISM radio wave radiated devices. Thailand Statement The output power is restricted to 100 mW (20 dBm) EIRP. Česky [Czech] Ruckus Wireless tímto prohlašuje, že tento Radio LAN je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede Ruckus Wireless erklærer herved, at følgende udstyr Radio LAN overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt Ruckus Wireless, dass sich das Gerät Radio LAN in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab Ruckus Wireless seadme Radio LAN vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, Ruckus Wireless declares that this Radio LAN is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente Ruckus Wireless declara que el Radio LAN cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ruckus Wireless ΔΗΛΩΝΕΙ ΟΤΙ Radio LAN ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente Ruckus Wireless déclare que l'appareil Radio LAN est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente Ruckus Wireless dichiara che questo Radio LAN è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar šo Ruckus Wireless deklarē, ka Radio LAN atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šiuo Ruckus Wireless deklaruoja, kad šis Radio LAN atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart Ruckus Wireless dat het toestel Radio LAN in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, Ruckus Wireless, jiddikjara li dan Radio LAN jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, Ruckus Wireless nyilatkozom, hogy a Radio LAN megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym Ruckus Wireless oświadcza, że Radio LAN jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português [Portuguese] Ruckus Wireless declara que este Radio LAN está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] Ruckus Wireless izjavlja, da je ta Radio LAN v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] Ruckus Wireless týmto vyhlasuje, že Radio LAN spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] Ruckus Wireless vakuuttaa täten että Radio LAN tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar Ruckus Wireless att denna Radio LAN står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Íslenska [Icelandic] Hér með lýsir Ruckus Wireless yfir því að Radio LAN er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Norsk [Norwegian] Ruckus Wireless erklærer herved at utstyret Radio LAN er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. 800-70197-001-A

Navigation menu