Senao Networks TR9360 Wireless-N Pocket AP/Router User Manual Part 2

Download:
Mirror Download [FCC.gov]
Document ID	1344611
Application ID	gmhyFLk41ddabvri1MICtg==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	202.96kB (2536956 bits)
Date Submitted	2010-09-16 00:00:00
Date Available	2010-09-16 00:00:00
Creation Date	2010-09-16 15:51:05
Producing Software	GPL Ghostscript 8.61
Document Lastmod	2010-09-16 15:51:19
Document Title	User Manual Part 2
Document Creator	PDFCreator Version 0.9.5
Document Author:	Aimee

69
Security
SSID Selection:
Select the SSID that the security settings will apply to.
Broadcast SSID:
If Disabled, then the device will not be broadcasting the SSID. Therefore it will be
invisible to wireless clients.
WMM:
Wi-Fi Multi-Media is a Quality of Service protocol which prioritizes traffic in the order
according to voice, video, best effort, and background.
Note that in certain situations, WMM needs to be enabled to achieve 11n transfer
speeds.
Encryption:
The encryption method to be applied.
You can choose from WEP, WPA pre-shared key or WPA RADIUS.
• Disabled - no data encryption is used.
• WEP - data is encrypted using the WEP standard.
• WPA-PSK - data is encrypted using the WPA-PSK standard. This is a later standard
than WEP, and provides much better security than WEP. If all your Wireless stations
support WPA-PSK, you should use WPA-PSK rather than WEP.
• WPA2-PSK - This is a further development of WPA-PSK, and offers even greater
security, using the AES (Advanced Encryption Standard) method of encryption.
• WPA-RADIUS - This version of WPA requires a Radius Server on your LAN to
provide the client authentication according to the 802.1x standard. Data
transmissions are encrypted using the WPA standard.
If this option is selected:
• This Access Point must have a "client login" on the Radius Server.
• Each user must have a "user login" on the Radius Server.
• Each user's wireless client must support 802.1x and provide the login data when
required.
• All data transmission is encrypted using the WPA standard. Keys are
automatically generated, so no key input is required.
IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to this Access Point before accessing the
wireless LAN. The authentication is processed by a RADIUS server. This mode only authenticates users by IEEE 802.1x, but it does
not encrypt the data during communication.
70
802.1x Authentication
RADIUS Server IP
Address:
The IP Address of the RADIUS Server
RADIUS Server
port:
The port number of the RADIUS Server.
RADIUS Server
password:
The RADIUS Server’s password.
71
WEP Encryption:
WEP Encryption
Authentication
Type:
Please ensure that your wireless clients use the
same authentication type.
Key type
•
•
Key Length:
Select the desired option, and ensure the wireless
clients use the same setting.
• 64 Bit - data is encrypted, using the default key,
before being transmitted. You must enter at least
the default key. For 64 Bit Encryption, the key
size is 10 chars in HEX (0~9 and A~F).
• 128 Bit - data is encrypted, using the default key,
before being transmitted. You must enter at least
the default key. For 128 Bit Encryption, the key
size is 26 chars in HEX (0~9 and A~F).
Default Key:
Select the key you wish to be the default.
Transmitted data is ALWAYS encrypted using the
Default Key; the other Keys are for decryption only.
You must enter a Key Value for the Default Key.
Encryption
Key #:
Enter the key value or values you wish to use. Only
the Key selected as Default is required. The others
are optional.
ASCII: regular text (recommended)
HEX: for advanced users
72
WPA Pre-Shared Key Encryption:
WPA Pre-Shared Key Encryption
Authentication Type:
Please ensure that your wireless clients use the same authentication
type.
WPA type:
Select the WPA encryption you would like.
Please ensure that your wireless clients use the same settings.
Pre-shared Key
Type:
Select whether you would like to enter the Key in HEX or
Passphrase format.
Pre-shared Key:
Wireless clients must use the same key to associate the device.
If using passphrase format, the Key must be from 8 to 63 characters
in length.
73
WPA RADIUS Encryption:
WPA RADIUS Encryption
WPA type:
Select the WPA encryption you would like.
Please ensure that your wireless clients use the same settings.
RADIUS Server IP
address:
Enter the IP address of the RADIUS Server
RADIUS Server Port:
Enter the port number used for connections to the RADIUS server.
RADIUS Server
password:
Enter the password required to connect to the RADIUS server.
74
Filter
This page allows you to create filters to control which wireless clients can connect to this device by only allowing the MAC
addresses entered into the Filtering Table.
75
Wireless Filter
Enable Wireless
Access Control:
Tick the box to Enable Wireless Access Control.
When Enabled, only wireless clients on the Filtering Table will be
allowed.
Description:
Enter a name or description for this entry.
MAC address:
Enter the MAC address of the wireless client that you wish to allow
connection.
Add:
Click this button to add the entry.
Reset:
Click this button if you have made a mistake and want to reset the
MAC address and Description fields.
MAC Address Filtering Table
Only clients listed in this table will be allowed access to the wireless network.
Delete Selected:
Delete the selected entries.
Delete All:
Delete all entries
Reset:
Un-tick all selected entries.
76
Wi-Fi Protected Setup (WPS)
WPS feature is following the Wi-Fi Alliance WPS standard and it eases the set up of security-enabled Wi-Fi networks in
the home and small office environment.
It reduces the user steps required to configure a network and supports two methods that are familiar to most consumers
to configure a network and enable security.
77
Wi-Fi Protected Setup (WPS)
WPS:
Tick to Enable the WPS feature.
WPS Button:
Tick to Enable the WPS push button.
Wi-Fi Protected Setup Information
WPS Current Status:
Shows whether the WPS function is Configured or Un-configured.
Configured means that WPS has been used to authorize connection
between the device and wireless clients.
SSID:
The SSID (wireless network name) used when connecting using
WPS.
Authentication
Mode:
Shows the encryption method used by the WPS process.
Passphrase Key:
This is the passphrase key that is randomly generated during the
WPS process. It is required if wireless clients that do not support
WPS attempts to connect to the wireless network.
WPS Via Push
Button:
Click this button to initialize WPS feature using the push button
method.
Initializing WPS Feature
78
There are two methods to initialize the WPS feature. They are the Push Button and Pin code methods.
1. WPS Push Button Method
Push the WPS button on the TRAVEL ROUTER device. The WPS LED light will start to flash to indicate that the WPS
process is ready.
While the WPS LED is flashing on the TRAVEL ROUTER, press the WPS button
on your wireless client. This could either be a physical hardware button,
or a software button in the utility.
79
2. Pin Code Method
Note the Pin code of your TRAVEL ROUTER device.
Please use this Pin code to initialize the WPS process from the wireless client configuration utility.
This process will be different for each brand or model. Please consult the user manual of the wireless client for more
information.
80
Client List
This page shows the wireless clients that are connected to the TRAVEL ROUTER device.
81
Policy
This page allows you to configure the access policies for each SSID (wireless network).
Policy
WAN Connection:
Allow wireless clients on this SSID to access the WAN port which typically is an Internet
connection.
Communication between Wireless
clients:
Whether each wireless client can communicate with each other in this SSID. When
Disabled, the wireless clients will be isolated from each other.
Communication between Wireless
clients and Wired clients.
Whether wireless clients on this SSID can communicate with computers attached to the
wired LAN port.
82
8.2.4 Firewall
The Internet section allows you to set the access control and Firewall settings.
Enable
This page allows you to Enable / Disable the Firewall features.
When Enabled, Denial of Service (DoS) and SPI (Stateful Packet Inspection) features are also be enabled.
83
Advanced
You can choose whether to allow VPN (Virtual Private Network) packets to pass through the Firewall.
84
DMZ
If enabled this feature, allows the DMZ computer on your LAN to be exposed to all users on the Internet.
•
•
•
This allows almost any application to be used on the server.
The “DMZ PC” will receive all Unknown connections and data.
If the DMZ feature is enabled, please enter the IP address of the PC to be used as the “DMZ PC”
Note: The “DMZ PC” is effectively outside the Firewall, making it more vulnerable to attacks. For this reason, you should only enable the DMZ
feature when required.
85
Denial of Service (DoS)
Denial of Service (Denial of Service) is a type of Internet attack that sends a high amount of data to you with the intent to
overload your Internet connection.
Enable the DoS firewall feature to automatically detect and block these DoS attacks.
86
MAC Filter
You can choose whether to Deny or only Allow those computers listed in the MAC Filtering table to access the Internet.
MAC Filter
Enable MAC filtering:
Tick this box to Enable the MAC filtering feature.
Deny all clients with MAC addresses
listed below to access the network:
When selected, the computers listed in the MAC Filtering table will be Denied
access to the Internet.
Allow all clients with MAC addresses
listed below to access the network:
When selected, only the computers listed in the MAC Filtering table will be Allowed
access to the Internet.
87
IP Filter
You can choose whether to Deny or only Allow, computer with those IP Addresses from accessing certain Ports.
This can be used to control which Internet applications the computers can access.
You may need to have certain knowledge of what Internet ports the applications use.
IP Filter
Enable IP filtering:
Tick this box to Enable the IP filtering feature.
Deny all clients with IP addresses
listed below to access the network:
When selected, the computers with IP addresses specified will be Denied access to the
indicated Internet ports.
Allow all clients with IP addresses
listed below to access the network:
When selected, the computers with IP addresses specified will be Allowed access only to
the indicated Internet ports.
88
URL Filter
You can deny access to certain websites by blocking keywords in the URL web address.
For example, “abc123” has been added to the URL Blocking Table. Any web address that includes “abc123” will be
blocked.
89
8.2.5 Advanced
The Internet section allows you to configure the Advanced settings of the router.
Network Address Translation (NAT)
This page allows you to Enable / Disable the Network Address Translation (NAT) feature. The NAT is required to share
one Internet account with multiple LAN users.
It also is required for certain Firewall features to work properly.
90
Port Mapping
Port Mapping allows you to redirect a particular range of ports to a computer on your LAN network. This helps you host
servers behind the NAT and Firewall.
In the example below, there is a Mail Server that requires ports 22 to 23.
When there is a connection from the Internet on those ports, it will be redirected to the Mail Server at IP address
192.168.0.150.
Port Mapping
Enable Port Mapping Tick this box to Enable the Port Mapping feature.
Description:
Enter a name or description to help you identify this entry.
Local IP:
The local IP address of the computer the server is hosted on.
Protocol:
Select to apply the feature to either TCP, UDP or Both types of packet transmissions.
Port range:
The range of ports that this feature will be applied to.
91
Port Forwarding
Port Forwarding allows you to redirect a particular public
port to a computer on your LAN network. This helps
you host servers behind the NAT and Firewall.
In the example below, there is a FTP Server running
on port 21 on the LAN.
For security reasons, the Administrator would like to
provide this server to Internet connection on port 30.
Therefore then there is a connection from the Internet
on port 30, it will be forwarded to the computer with the
IP address 192.168.0.100 and changed to port 21.
Port Forwarding
Enable Port
Forwarding
Tick this box to Enable the Port Forwarding feature.
Description:
Enter a name or description to help you identify this entry.
Local IP:
The local IP address of the computer the server is hosted on.
Protocol:
Select to apply the feature to either TCP, UDP or Both types of packet transmissions.
Local Port:
The port that the server is running on the local computer.
Public Port:
When a connection from the Internet is on this port, then it will be forwarded to the indicated local IP address.
92
Port Trigger
If you use Internet applications which use non-standard connections
or port numbers, you may find that they do not function correctly
because they are blocked by the Wireless Router's firewall. Port
Trigger will be required for these applications to work.
Port Trigger
Enable Port
Forwarding
Tick this box to Enable the Port Trigger feature.
Popular
applications:
This is a list of some common applications with preset settings.
Select the application and click Add to automatically enter the settings.
Trigger port:
This is the outgoing (outbound) port numbers for this application.
Trigger type
Select whether the application uses TCP, UDP or Both types of protocols for outbound transmissions.
Public Port
These are the inbound (incoming) ports for this application.
Public type:
Select whether the application uses TCP, UDP or Both types of protocols for inbound transmissions.
93
Application Layer Gateway (ALG)
Certain applications may require the use of ALG feature to function correctly. If you use any of the applications listed,
please tick and select it to enable this feature.
94
Universal Plug and Play (UPnP)
The UPnP function allows automatic discovery and configuration of UPnP enabled devices on your network. It also
provides automatic port forwarding for supported applications to seamlessly bypass the Firewall.
Universal Plug and Play (UPnP)
Enable the UPnP
Feature:
Tick this box to Enable the UPnP feature to allow supported devices to be visible on the network.
Allow users to make port
forwarding changes
through UPnP:
Tick this box to allow applications to automatically set their port forwarding rules to bypass the
firewall without any user set up.
95
Quality of Service (QoS)
QoS allows you to control the priority that the
data is transmitted over the Internet, or to
reserve a specific amount of Internet
bandwidth. This is to ensure that applications
get enough Internet bandwidth for a pleasant
user experience.
If not, then the performance and user
experience of time sensitive transmissions
such as voice and video could be very poor.
In order for this feature to function properly, the
user should first set the Uplink and Downlink
bandwidth provided by your Internet Service Provider.
Total Bandwidth Settings
Uplink:
Set the Uplink bandwidth provided by your Internet Service Provider.
Downlink:
Set the Downlink bandwidth provided by your Internet Service Provider.
Priority Queue
Sets the QoS method to Priority Queue.
Bandwidth
Allocation:
Sets the QoS method to Bandwidth Allocation.
Disabled
Disables the QoS feature.
96
Priority Queue Method
Bandwidth priority is set to either High or Low. The
transmissions in the High queue will be processed first.
Unlimited Priority Queue
Local IP Address:
The computer with this IP Address will not be bound by the QoS rules.
High / Low Priority Queue
Protocol:
The type of network protocol.
High / Low Priority
Sets the protocol to High or Low priority.
Specific Port
Each protocol uses a specific port range.
Please specify the ports used by this protocol.
97
Bandwidth Allocation Method
You can set the maximum amount of
bandwidth a certain protocol will use at one
time. Or you can set a minimum amount of
bandwidth that will be guaranteed to a certain
protocol.
Bandwidth Allocation
Type:
Set whether the QoS rules apply to transmission that are Download, Upload or Both directions.
Local IP range:
Enter the IP address range of the computers that you would like the QoS rules to apply to.
Protocol:
Select from this list of protocols to automatic set the related port numbers.
Port range:
Each protocol uses a specific port range.
Please specify the ports used by this protocol..
Policy:
Choose whether this rule is to set a limit on the Maximum amount of bandwidth allocated to this protocol, or to
set the guaranteed Minimum amount of bandwidth for this protocol.
98
Routing
If your TRAVEL ROUTER device is connected a network with
different subnets, then this feature will allow the different
subnets to communicate with each other.
Note: NAT function needs to be disabled for the Routing feature to be
enabled.
Static Routing
Enable Static Routing:
Tick this box to Enable the Static Router feature.
Destination LAN IP:
Enter the IP address of the destination LAN.
Subnet Mask:
Enter the Subnet Mask of the destination LAN IP address
Default Gateway:
Enter the IP address of the Default Gateway for this destination IP and Subnet.
Hops:
Specify the maximum number of Hops in the static routing rule.
Interface:
Select whether the routing applies to LAN or WAN interfaces.
99
Destination
Subnet Mask
Gateway
Hop
Interface
192.168.1.0
255.255.255.0
192.168.123.216
LAN
192.168.0.0
255.255.255.0
192.168.123.103
LAN
So if, for example, Client3 wants to send an IP data packet to 192.168.0.2 (Client 2), it would use the above table to
determine that it had to go via 192.168.123.103 (Router 2)
And if it sends Packets to 192.168.1.11 (Client 1) will go via 192.168.123.216 (Router 1).
100
8.2.6 Tools
This section allows you to configure some device system
settings.
Admin
This page allows you to change the system password and to
configure remote management.
Change Password
Old Password:
Enter the current password.
New Password:
Enter your new password.
Repeat New Password:
Enter your new password again for verification.
Remote Management
Host Address:
You can only perform remote management from the specified IP address. Leave blank to allow any
host to perform remote management.
Port:
Enter the port number you want to accept remote management connections.
Enable:
Tick to Enable the remote management feature.
101
Time
This page allows you to set the system time.
Time
Time Setup:
Select the method you want to set the time.
Time Zone:
Select the time zone for your current location.
NTP Time Server:
Enter the address of the Network Time Protocol (NTP) Server to
automatically synchronize with a server on the Internet.
Daylight Savings:
Check whether daylight savings applies to your area.
102
Dynamic DNS (DDNS)
This free service is very useful when combined with the
Virtual Server feature. It allows Internet users to connect to
your Virtual Servers using a URL, rather than an IP
Address.
This also solves the problem of having a dynamic IP
address. With a dynamic IP address, your IP address may
change whenever you connect, which makes it difficult to
connect to you.
DDNS Services work as follows:
1.
2.
3.
4.
You must register for the service at one of the listed DDNS Service providers.
After registration, use the Service provider's normal procedure to obtain your desired Domain name.
Enter your DDNS data on the ETR-9305’s DDNS screen, and enable the DDNS feature.
The Wireless Router will then automatically ensure that your current IP Address is recorded at the DDNS service provider's Domain Name
Server.
5. From the Internet, users will be able to connect to your Virtual Servers (or DMZ PC) using your Domain name, as shown on this screen.
Dynamic DNS
Dynamic DNS
Tick this box to Enable the DDNS feature.
Server Address:
Select the list of Dynamic DNS homes you would like to use from this list.
Username / Password:
Enter the Username and Password of your DDNS account.
103
Power
This page allows you to Enable or Disable the wireless LAN power saving features.
104
Diagnosis
This page allows you determine if the TRAVEL ROUTER device has an active Internet connection.
Diagnosis
Address to Ping:
Enter the IP address you like to see if a successful connection can
be made.
Ping Result:
The results of the Ping test.
105
Firmware
The firmware (software) in the TRAVEL ROUTER device can be upgraded using your Web Browser.
To perform the Firmware Upgrade:
1. Click the Browse button and navigate to the location of the upgrade file.
2. Select the upgrade file. Its name will appear in the Upgrade File field.
3. Click the Apply button to commence the firmware upgrade.
Note: The Wireless Router is unavailable during the upgrade process, and must restart when the upgrade is completed. Any connections to or
through the Wireless Router will be lost.
106
Back-up
Back-up
Restore to factory
default:
Restores the device to factory default settings.
Backup Settings:
Save the current configuration settings to a file.
Restore Settings:
Restores a previously saved configuration file.
Click Browse to select the file. Then Upload to load the settings.
107
Reset
In some circumstances it may be required to force the device to reboot.
108
8.3 AP and Client Bridge Modes
When the TRAVEL ROUTER device is set to AP or Client Bridge modes, it will no longer allocate IP addresses to its
wireless clients.
To access the Web-Based configuration page, please follow the following steps to set a static IP address (Windows
XP/Vista).
1. Connect to the TRAVEL ROUTER using an Ethernet CAT.5 LAN Cable.
2. Click Start and open Control Panel.
Windows XP
Windows Vista
109
3. Windows XP, click [Network Connection]
Windows Vista, click [View Network Status and Tasks]
then [Manage Network Connections]
4. Right click on [Local Area Connection] and choose [Properties].
110
5. Check “Client for Microsoft Networks”, “File and Printer
Sharing”, and “Internet Protocol (TCP/IP) is ticked. If
not, please install them.
6. Select “Internet Protocol (TCP/IP)” and click
[Properties]
111
7. Manually set the IP Address. Then click [OK]
For example:
IP Address: 192.168.0.250
Subnet Mask: 255.255.255.0
112
8. You should now be able to access the Web-Based configuration in your Web Browser.
9. Remember to configure the settings back to Obtain an IP Address Automatically and Obtain DNS Server Address
Automatically once you complete configuring the Web-Based interface in Client Bridge Mode.
113
8.4 Client Bridge Mode
The Client Bridge mode turns the TRAVEL ROUTER into a wireless client, which then allows non-wireless devices to use
its RJ-45 port to access the network wirelessly.
8.4.1 Wireless
This section allows you to configure which wireless network the TRAVEL ROUTER will connect to.
Basic
1. Configure which wireless network the TRAVEL ROUTER will connect to in the Wireless Basic page.
2. Use the Site Survey button to scan the area for available wireless networks.
114
3. Select the SSID (wireless network) that you would like to connect to, and then click Add to AP Profile.
4. Enter the wireless security settings for this SSID. Then click Save to apply the settings.
5. Change your IP Address settings back to Obtain your IP Address Automatically.
You should now be connected to the wireless network through the TRAVEL ROUTER.
115
AP Profiles
You can save the settings up to three wireless networks. The TRAVEL ROUTER will automatically connect to the wireless
network in order of priority.
AP Profile
Add:
Manually Add a new SSID (wireless network) profile.
Edit:
Edit the SSID settings.
Move Up / Down:
Change the priority that the TRAVEL ROUTER will connect to these
SSID’s.
Delete Selected:
Deletes the selected SSID profile.
Delete All:
Deletes all SSID profiles.
Connect:
Force connection to this SSID.
116
Appendix A – FCC Interference Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
117
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented
in this manual.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
118
Appendix B – IC Interference Statement
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented
in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Modify Date                     : 2010:09:16 15:51:19+08:00
Create Date                     : 2010:09:16 15:51:05+08:00
Metadata Date                   : 2010:09:16 15:51:19+08:00
Creator Tool                    : PDFCreator Version 0.9.5
Format                          : application/pdf
Creator                         : Aimee
Document ID                     : uuid:020931f3-4425-4af9-8d28-a27009aeead3
Instance ID                     : uuid:2620519b-4c30-48fc-9812-22ae80584cb7
Producer                        : GPL Ghostscript 8.61
Page Count                      : 50
Author                          : Aimee

EXIF Metadata provided by EXIF.tools