Sensitech T11012177 TEMPTALE4 RF MONITOR STORES TEMPERATURE VALUES, IDENTIFIES LOCATIONS TRAVELED THROUGH AND STORES SHIPMENT INFORMATION. ALL OF THIS INFORMATION CAN BE TRANSMITTED WIRELESSLY TO A LOCAL COMPUTER. User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1326551
Application ID	SyiqkwYUFeJdkOfVMxKacA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.16kB (189445 bits)
Date Submitted	2010-08-13 00:00:00
Date Available	2010-08-16 00:00:00
Creation Date	2010-07-28 14:34:04
Producing Software	Acrobat Distiller 8.2.3 (Windows)
Document Lastmod	2010-07-28 14:34:04
Document Title	Microsoft PowerPoint - TT RF User Instructions_english_spanish_Rev_B.pptx
Document Creator	PScript5.dll Version 5.2
Document Author:	Sue

Millions Depend on the Integrity of Your Product.
Sensitech’s Mission is to Ensure that Integrity.
The Tools That Turn Information Into Power
TempTale RF
Monitor
®
Instructions For Use
TempTale® Manager Software
TempTale®4 Probe Monitor
Data Management Services
TempTale®4 Monitor
RF Monitoring
TagAlert™ Monitor
For more information, contact our client services
group at 800-843-8367.
© 2010. All Rights Reserved.
TempTale is a registered trademark and TagAlert is a trademark of Sensitech, Inc.
800 Cummings Center, Beverly, MA 01915
T11012177 Rev. B.
FCC ID SRMT11012177
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2)this device must accept any
interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved
by Sensitech could avoid the user’s authority to
operate the equipment.
Sensitech Inc. • 800 Cummings Center • Beverly, MA 01915
(978) 927-7033 • Fax (978) 921-2112 www.sensitech.com
All TempTale® RF Monitors can be programmed with a custom Start-up
delay, measurement interval and alarm settings which have been predetermined by the customer.
Starting a TempTale RF Monitor
•
•
•
Iniciar el TempTale RF
Press and release the Start button.
The “Sunshine” icon
appears in the upper left corner of
the display.
The TempTale RF will begin to record data after the start-up
delay has passed.
•
•
•
To mark an important event (“Date Stamp”)
•
•
•
TempTale RF monitors provide an option to “Date Stamp” or mark an important
event at any time during the monitoring cycle that will be visible when viewing
the data. The mark is displayed as an arrow when viewing the graph and shown
in italics when viewing the tabular data.
To mark a graph while the monitor is recording, press and release the “Start”
button.
The “arrow” icon will appear temporarily in the lower left corner and the
temperature history will appear on the display. Data appears as follows:
1.
2.
3.
4.
5.
6.
7.
Los monitores de TempTale® RF están programado con uno tiempo de
demura, intervalo y limites de temperatura y tiempo que fueron requierido
por el cliente.
Average temperature of Primary (Ambient) Sensor Readings
Highest temperature recorded at Primary Sensor
Total time above high temperature limit of Primary Sensor
Lowest temperature recorded at Primary Sensor
Total time below low temperature limit of Primary Sensor
Highest RH value recorded at Secondary (RH) Sensor
Lowest RH value recorded at Secondary (RH) Sensor
Presione y libere el botón de inicio “Start”.
El icon del “Sol”
aparecerá a la izquierda en la parte
superior de la pantalla.
El TempTale RF grabará despúes del tiempo de demura.
Para marcar un evento importante (Estampa de fecha)
•
•
•
Los TempTale RF monitores tienen la opción de marcar un evento
importante que occura durante el envio. Se puede ver esta marca cuando
se baja la información. La marca aparecerá como una flecha en el grafíco
y en italico en el tabular.
Para marcar el evento durante el envio, presione y libere el botón de
inicio “Start”.
Una flecha aparecerá en la pantalla y la información de temperatura
aparecerá en el siguente orden:
1. Temperatura media de las lecturas (ambiente) primarias del sensor
2. La temperatura más alta registrada en el sensor primario
3. Tiempo total sobre límite de alta temperatura del sensor primario
4. La temperatura más baja registrada en el sensor primario
5. Tiempo total debajo del límite de la baja temperatura del sensor primario
6. El valor más alto de la RH registrado en el sensor secundario (RH)
7. El valor más bajo de la RH registrado en el sensor secundario (RH)
Alarm
Alarma
When the TempTale RF is exposed to a temperature outside a pre-programmed limit
and time threshold, an “Alarm bell”
will appear in the lower right corner of the
LCD display.
Cuando el TempTale RF está fuera del límite bajo o alto del tiempo
programado, un icon de alarma
aparecerá a la derecha en la parte baja de
la pantalla.
Stopping a TempTale RF Monitor
Parar el TempTale RF
Press and hold (1 to 3 seconds) the Stop button until the “Stop sign”
appears in the upper right corner of the LCD display.
Temperature data
icon
Presione y libere (1 a 3 segundos) el botón de parar “Stop” hasta que el icon de
“Stop”
aparezca a la derecha en la parte superior de la pantalla.
Pantalla del Monitor:
Displayed Information
Información de temperatura
Recording
Stopped
recording
Iniciado
Parado
Marked
Point
Limits
exceeded
Marca de
evento
Alarma
RADIO AND TELEVISION INTERFERENCE
NOTE: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:07:28 14:34:04-04:00
Create Date                     : 2010:07:28 14:34:04-04:00
Format                          : application/pdf
Title                           : Microsoft PowerPoint - TT RF User Instructions_english_spanish_Rev_B.pptx
Creator                         : Sue
Producer                        : Acrobat Distiller 8.2.3 (Windows)
Document ID                     : uuid:f04af2d9-32cb-4685-985b-7e8888d160c0
Instance ID                     : uuid:d73ac9f7-5907-4a36-b4b7-3c88319a63f0
Page Count                      : 3
Author                          : Sue

EXIF Metadata provided by EXIF.tools