Sensoro S0010X a Base Station User Manual

Sensoro Co., Ltd. a Base Station

User Manual.pdf

Overviewα Base Station User Manual
α Base Station is designed and built for outdoor IoT application scenes that require low power-consumption,long range and low throughput, hence capable of handling the data communicationof a large-scale sensing network.It supports multiple communication modes to servers (3G, Ethernet etc.) for flexibility to adapt tovariousscenes; multi-network hot backup is also available to improvereliability and stability in data communication.Operating PrinciplesPoE Power Supply
SpecificationsProperty SpecificationsDimensions 120mm x 120mm x 260mmWeight 2.5kgMaterial Al 6063TInterface RJ45 x 1̵Console x 1̵Antenna N-Type Female Connector x 4LED 1Network 3G̵EthernetPower Power over Ethernet (PoE) (802.3af) <13WOperatingEnvironment-40°Cӗ+65°C 5%RHӗ90%RH -60mӗ3000mҁBut the POE Adapteronly use for 0°Cӗ+40°C҂
StorageEnvironment -40°Cӗ+80°C 5%RHӗ90%RHIP Grade IP67Wind resistance 165MPHAtmosphericpressure 53kPaӗ106kPaThe socket-outlet shall be installed near the equipment and shall be easily accessible. Theproduct is designed for IT power distribution system with phase-to-phase voltage 230V.α Commanderhttp://iot.sensoro.com .α Tool
http://iot.sensoro.com/app/download .Docs
http://docs.sensoro.com .Base Station StatusLED Status What an you doBreathing Station Starting Waiting for about 2 minsWhite Working Properly Nothing to doYellow Something Error RestartRed No Internet Connection Check the 3G҈LANContact UsUS HeadquartersSeattle, United StatesE-mail: seattle@sensoro.comPhone: +1 (425) 802-4936Address: 500 YALE AVENUE NORTH SEATTLE WA 98109Beijing Headquarters
Customer Service Tel: 400-686-3180Working Hours: Monday to Friday 10:00 am to 7:00 pmE-mail: beijing@sensoro.comDevelopers’ QQ group: 385 456 618Address: T1-B-2807, Wangjing SOHO, Chaoyang District, Beijing, ChinaCustomer ServiceTell ғ+86 010-8416 1077Email ғseattle@sensoro.comCAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONSRECYCLINGThis product bears the selective sorting symbol for Waste electrical and electronic equipment(WEEE). This means that this product must be handled pursuant to European directive2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailerwhen he buys an new electrical or electronic equipment.WarningChanges or modifications to this unit not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.NOTEThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:☐ Reorient or relocate the receiving antenna.☐ Increase the separation between the equipment and receiver.☐ Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.☐ Consult the dealer or an experienced radio/TV technician for help.FCC RF exposure statement:FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RFexposure guidelines, place the product at least 20cm from nearby persons. The device must notbe co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu