Sensus Metering Systems EZL01 Remote Telemetry Data Collector User Manual 72129866 Manual Coverx

Sensus Metering Systems Inc. Remote Telemetry Data Collector 72129866 Manual Coverx

Manual

2320 Presidential Drive, Suite 101, Durham, NC 27703 USA Voice: 919-381-4235 Certification Exhibit FCC ID: SDBEZL01 IC: 2220A-EZL01FCC Rule Part: CFR 47 Part 24 Subpart D, Part 101, Subpart C ISED Canada’s Radio Standards Specification: RSS-119, RSS-134 TÜV SÜD Project Number: 72129866 Manufacturer: Sensus Metering Systems, Inc. Model: 5396390010001Manual
FlexNet EasyLink™ ReaderUser GuideAUG-10061-01DRAFT 8
Revision HistoryRev No. Date DescriptionRev 01 22-SEP-2017 Initial Release CopyrightThis document, in whole or in part, (“Document”) includes confidential and proprietaryinformation belonging to Sensus USA Inc. and/or one of its subsidiaries or affiliates.Unauthorized use, reproduction, disclosure, distribution, or dissemination of this Documentis strictly prohibited. No party may use, reproduce, disclose, distribute, or disseminate thisDocument for any purpose without express written authorization from Sensus USA Inc.Any use, reproduction, disclosure, distribution, or dissemination of this Document doesnot transfer title to, license, or grant any patent, copyright, trademark, or other intellectualproperty rights. This Document, and any copies or derivatives thereof, must be returnedimmediately on demand. This Document is subject to any applicable non-disclosureagreement(s). Information in this Document is subject to change without notice and doesnot represent a commitment on the part of Sensus.© 2017, Sensus USA, Inc., a subsidiary of Xylem, Inc. All Rights Reserved.FlexNet® and associated logos are trademarks of Sensus and its subsidiaries and affiliates.FlexNet EasyLink™ is a trademark of Sensus.Mobile Field Force is a registered trademark of Clevest Solutions Inc.Windows is a registered trademark of Microsoft Corporation in the United States and othercountries.All other brand names may be trademarks of their respective owners.Sensus8601 Six Forks RoadSuite 700Raleigh, NC 276151-800-638-3748www.sensus.comDocument: FlexNet EasyLink™ User GuideDocument Number: AUG-10061-01Revision History | iiDRAFT 8
ContentsRevision History.......................................................................iiCopyright................................................................................................ii1 Introduction to FlexNet EasyLink™......................................4Components..........................................................................................4Specifications.........................................................................................52 Setup the FlexNet EasyLink Reader.................................... 6Setup the FlexNet EasyLink WorkBook Application................................7Initial Login........................................................................................8Bluetooth Pairing...............................................................................9LEDs....................................................................................................10Compliance Statements........................................................11Contents | 3DRAFT 8
1 Introduction to FlexNetEasyLink™FlexNet EasyLink™ is a hardware and software solution that is capable of reading bothSensus' FlexNet SmartPoint modules and ERT devices that operate with StandardConsumption Message (SCM) packets. The FlexNet EasyLink™ Reader is a transceiver,installed in a vehicle, running an application that can merge with your existing routemanagement and billing processes.FlexNet EasyLink enables utilities to keep existing ERT devices while simultaneouslydeploying and reading Sensus SmartPoint modules in the field. It provides an easy path forupgrading from an AMR system to an AMI system.The FlexNet EasyLink Reader contains two transceivers working with two antennas. Onetransceiver supports wake up ERT modes for ERT device reading and one transceiversupports mobile reading of FlexNet SmartPoint modules and bubble up ERT data collection.The FlexNet EasyLink Reader transmits readings via a USB connection on the devicerunning the FlexNet EasyLink WorkBook Application or via Bluetooth to the FlexNetEasyLink WorkBook Application. ComponentsThe FlexNet EasyLink Reader and components come in a carrying case for ease of shippingand carrying. The FlexNet EasyLink Reader can be ordered with a ToughPad running theFlexNet EasyLink WorkBook Application along with a mounting kit and power cable for theToughPad.The FlexNet EasyLink Reader kit includes a carrying case and with the followingcomponents inside the case:FlexNet EasyLink Reader (transceiver)FlexNet antenna with magnetic mount and antenna extender for sending tones toFlexNet SmartPoint modules and receiving responses from FlexNet SmartPoint modulesand bubble up ERTs.ERT antenna with magnetic mount for sending an interrogation tone to wake up ERTdevicesPower cableUSB cableTwo nylon straps for carrying and securing the transceiver(Optional) ToughPad Kit running the FlexNet EasyLink WorkBook Application, ToughPadDC power, mounting kit1 Introduction to FlexNet EasyLink™ | 4DRAFT 8
SpecificationsCategory SpecificationDimensions 8" W x 12" D x 4" H (20.32cm W x 30.48cm D x 10.16cm H)Weight 18 lbs. (8.16 kg)Temperature -20°C to +50°C Operating, -40°C to +85°C Storage (-4°F to 122°F Operating,-40°F to 185°F Storage)Humidity 95% non-condensing, Operating & StorageRated Voltage 12Vdc nominalOperating Voltage Range 10.5V minimum to 16V maximum DCPower Consumption <20 Watts in Receive Mode<60 Watts in Transmit ModeOutput Power 6.4 Watts nominalCompliance FCC CFR47 Part 15, Part 24 and Part 101Label Model: 53963900100XXFCC ID: SDBEZL01IC: 2220A-EZL01Emission Designator 5K90F1D/11K80F1D/8K75F1D/17K5F1D/14K80F1DAuthorized Bandwidth Part 24.131 Mask 10 kHz and 20 kHzPart 101.111 25 kHzPart 101.111 12.5 kHz1 Introduction to FlexNet EasyLink™ | 5DRAFT 8
2 Setup the FlexNet EasyLinkReaderThe FlexNet EasyLink Reader and its' accessories are designed for using in a movingvehicle. Please follow all local safety regulations when operating a moving vehicle.1. Place the FlexNet EasyLink Reader in a secure location inside the vehicle. A side strapis provided on the EasyLink Reader to carry the unit to the vehicle or use one theprovided nylon strap(s) as a shoulder strap.2. Secure the FlexNet EasyLink Reader so that it will not move around or shift while thevehicle is moving. You may choose to run the provided straps through the D rings tosecure the unit to a seat if another secure mounting method is not readily available.Note: If placing the unit in the passenger seat, it may be necessary to use the seatbelt or disablethe airbag, depending on the type of vehicle.Note: If mounting the unit using a third party mounting kit, follow all safety regulations andinstructions for your particular mounting unit.CAUTION: Do not block the cooling vents of the FlexNet EasyLink Reader. The intakecooling vents are located on the front of the unit. The exhaust cooling vents are locatedon thetop of the back side and the back end of the top of the unit.3. Secure the antennas to the top of the vehicle in the center of the roof. If you are usingboth antennas, place both as close to the center of the roof as possible.The FlexNet antenna sends FlexNet NA2W wake up tones, FlexNet electric drive-by commands, and receives all FlexNet messages and ERT Standard Consumptionmessages. The ERT antenna sends the ERT Interrogation tone for wake-up ERTdevices. The FlexNet antenna is the only antenna you need unless you have wake-upERT devices.4. Run the antenna cables between the door and body of the vehicle and connect them tothe EasyLink Reader.2 Setup the FlexNet EasyLink Reader | 6DRAFT 8
Note: Make sure you do not close either antenna cable in the vehicle door or window as this candamage the cable.5. Connect to the ToughPad or your Windows enabled laptop via Bluetooth or use theprovided USB Type A to USB Type B cable to connect from the FlexNet EasyLinkReader's USB port to the ToughPad/laptop.6. Connect the power cable from the power connector on the FlexNet EasyLink Readerto the vehicle's 12V power receptacle. The FlexNet EasyLink Reader powers upimmediately when power is applied.CAUTION: There is no On/Off switch for power on the FlexNet EasyLink Reader. Takecare not to bump the power cord as the FlexNet EasyLink Reader will turn off if thepower connection is compromised.7. Check the indicator lights (see LEDs on page 10) to make sure the FlexNet EasyLinkReader is operational. Setup the FlexNet EasyLink WorkBook ApplicationThe FlexNet EasyLink WorkBook Application runs on the supplied ToughPad or a Windowsequipped laptop.1. If using the ToughPad, clip it to the EasyLink Reader so that it does not slide aroundwhile driving.2 Setup the FlexNet EasyLink Reader | 7DRAFT 8
2. Connect to the ToughPad or a Windows equipped laptop via the USB cable orBluetooth.• If connecting via a USB cable, you will need to check the version of Windows. If youare running an earlier version than Windows 7, you will not have the appropriatedrivers and will need to download a virtual COM port (VCP) driver first. (Available athttp://www.ftdichip.com/Drivers/VCP.htm).• If connecting via Bluetooth, you will need to pair the FlexNet EasyLink Reader thefirst time it is connected. See Bluetooth Pairing on page 9.3. Power on the ToughPad/laptop and the FlexNet EasyLink Reader.4. If using the ToughPad, launch the FlexNet EasyLink WorkBook Application which is pre-installed. If using a laptop, you will need to download and install the FlexNet EasyLinkWorkBook Application.5. Open the EasyLink WorkBook application and login. If this is the first time you havelogged in to the application you will need to follow the Initial Login on page 8 stepsand you may need to create a new password. Initial LoginIf this is the first time you are logging in to the FlexNet EasyLink WorkBook Application, youwill need to follow a few additional steps.1. From the main screen of your ToughPad or laptop, open the EasyLink WorkBookapplication.2. Click the settings button on the bottom right of the screen (the gear icon).3. Click the SSL checkbox.4. Click the Update button and wait for it to state "server updated successfully." If you donot get a success message, make sure that you have an active internet connection andthat there are no firewall restrictions in your network preventing access.5. Fill in all the fields.Enter your username and password.Click Groups and select EasyLink.Click Profiles and select your company environment name.2 Setup the FlexNet EasyLink Reader | 8DRAFT 8
6. Once all fields are filled in click the Connect button. If you are returned to the loginscreen the appropriate configuration files have downloaded and you may proceed withnormal login. Bluetooth PairingIf this is the first time you have used a ToughPad or a laptop with the FlexNet EasyLinkReader you will need to establish the Bluetooth connections.1. From the taskbar, click on the Bluetooth Devices icon and select Add a Device.2. The FlexNet EasyLink Reader will appear in the list as RNBT-XXXX where XXXX is thelast four digits of the Bluetooth radio's MAC address. Select this device and click Next.Note: The Bluetooth radio's MAC address is included on a label found on the outside of theEasyLink transceiver.3. Depending on your version of Windows, you may be asked to verify the code thatappears on the screen. If so, select Yes and then click Next.4. Windows will install the appropriate driver. After the appropriate driver is installed,the device appears as ready to use and can be detected by the FlexNet EasyLinkWorkBook Application.2 Setup the FlexNet EasyLink Reader | 9DRAFT 8
LEDsThe FlexNet EasyLink Reader incorporates LEDs to provide a visual indication of devicehealth. The lights can be solid, flashing, or blinking. Flash is a rapid on/off, like a heartbeat,while Blink is a slower interval. LED indicators include:Bluetooth (BT): Solid Blue to indicate a connection, Flashing Blue indicates traffic, andBlinking Blue when waiting for a connection.ERT Status: Flashes Red during initial boot, Blinks Green when operating.ERT RX: Flashes Red when receiving messages.ERT TX: Solid Red while transmitting to an ERT.USB: Flashes Red to indicate any communication through the USB connection.GPS: Blinks Green at a 1Hz rate, synchronized to the GPS time, indicating a GPS lock.Currently the solution uses the GPS on the laptop/ToughPad.FLX Status: Flashes Red during initial boot, Blinks Green when operating.FLX RX: Flashes Red when receiving messages.FLX TX: Solid Red while transmitting to a FlexNet SmartPoint module.2 Setup the FlexNet EasyLink Reader | 10DRAFT 8
Compliance StatementsWarning: Sensus devices are for professional installation only. They are to be serviced byprofessional personnel only. This product is NOT for consumer installation or servicing.RF Radiation Hazard: In order to satisfy the FCC RF exposure limit for transmitting devices,a separation distance of 100 cm (39.37 inches) or more should be maintained while operatingthe Sensus FlexNet EasyLink Reader. To ensure compliance, operation at closer than thisdistance is not recommended. This minimum safe distance is required between personnel andthis antenna of this device.RF Radiation Hazard: In order to satisfy the ISED RF exposure limit for transmitting devices,a separation distance of 100 cm (39.37 inches) or more should be maintained while operatingthe Sensus FlexNet EasyLink Reader. To ensure compliance, operation at closer than thisdistance is not recommended. This minimum safe distance is required between personnel andthis antenna of this device.Afin de satisfaire à la limite d'exposition RF pour les appareils de transmission, unedistance de séparation de 100 cm (39.37 pouces) ou plus doit être maintenu pendant lefonctionnement du Sensus appareil. Pour assurer la conformité, un fonctionnement à distanceinférieure à celle est pas recommandée. Cette distance minimale de sécurité est nécessaireentre le personnel et l'antenne de cet appareil.Warning: The antenna used for this transmitter must not be co-located in conjunction withany other antenna or transmitter.Shock Warning: Transmit only when people outside the vehicle are at least therecommended minimum lateral distance away from the body of a vehicle with a properlyinstalled antenna. This separation distance will ensure that there is sufficient distance from aproperly installed (according to installation instructions) externally-mounted antenna to satisfythe RF exposure requirements.Attention: For Class B - Unintentional Radiators:This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiverConnect the equipment into an outlet on a circuit different from that to which the receiveris connectedConsult the dealer or an experienced radio/TV technician for helpWarning: Any modifications made to this device that are not approved by Sensus may voidthe authority granted to the user by the FCC to operate equipment.Compliance Statements | 11DRAFT 8
Attention: ICES-003 Class B Notice-Avis NMB-003, Classe BThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numerique de la classe B est conforme à la norme NMB-003 du Canada.Warning: When applicable, there is danger of explosion if batteries are mishandled orincorrectly replaced. On systems with replaceable batteries, replace only with the samemanufacturer and type or equivalent type recommended per the instructions provided in theproduct service manual.Do not disassemble batteries or attempt to recharge them outside the system. Do notdispose of batteries in fire.Dispose of batteries properly in accordance with the manufacturer's instructions and localregulations.Warning: Do not dispose in fire, mix with other battery types, charge above specified rate,connect improperly, or short circuit, which may result in overheating, explosion or leakage ofcell contents.Warning: This radio is intended for use in occupational/controlled conditions, where usershave full knowledge of their exposure and can exercise control over their exposure to meetFCC limits. This radio device is NOT authorized for general population, consumer or any otheruse.Attention: This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interference that maycause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareilsradio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter toutbrouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.Attention: This radio transmitter EasyLink has been approved by Industry Canada to operatewith the antenna types listed below with the maximum permissible gain and required antennaimpedance for each antenna type indicated. Antenna types not included in this list, having again greater than the maximum gain indicated for that type, are strictly prohibited for use withthis device.Le présent émetteur radio EasyLink a été approuvé par Industrie Canada pour fonctionneravec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal etl'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cetteliste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pourl'exploitation de l'émetteur.OMNI +3.4dBi (FlexNet antenna and mount)OMNI ~+3dBi (ERT antenna and mount)Attention: Under Industry Canada regulations, this radio transmitter may only operate usingan antenna of a type and maximum (or lesser) gain approved for the transmitter by IndustryCanada. To reduce potential radio interference to other users, the antenna type and its gainshould be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more thanthat necessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvépour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillageCompliance Statements | 12DRAFT 8
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gainde sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensiténécessaire à l'établissement d'une communication satisfaisante.Attention:Mobile Antenna Installation Guidelines:These mobile antenna installation guildelines are limited to metal body motor vehicles orvehicles with appropriate ground planes.Antennas should be installed in the center line area of the roof taking into account theexposure conditions of backseat passengers and according to the specific instructionsand restrictions in this guide along with the requirements of the antenna supplier.Use only the approved make and model, or supplied antenna for a replacement antenna.Unauthorized antennas, modifications, or attachments could damage the radio and mayresult in non-compliance with RF Safety Standards.Warning:For Vehicles with an Air Bag:Do not mount or place a mobile radio in the area over an air bag or in the air bag deploymentarea. Air bags inflate with great force. If a radio is placed in the air bag deployment area andthe air bag inflates, the radio may be propelled with great force and cause serious injury tooccupants of the vehicle.Warning:Potentially Explosive Atmospheres:Turn off your radio prior to entering any area with a potentially explosive atmosphere. Sparksin a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injuryor even death. The areas with potentially explosive atmospheres include fueling areas such asbelow decks on boats, fuel or chemical transfer or storage facilities, and areas where the aircontains chemicals or particles such as grain, dust or metal powders. Areas with potentiallyexplosive atmospheres are often, but not always, posted.Warning:Blasting Caps and Blasting Areas:To avoid possible interference with blasting operations, turn off your radio when you arenear electrical blasting caps, in a blasting area, or in areas posted: "Turn off two-way radio."Obey all signs and instructions. For radios installed in vehicles fueled by liquefied petroleumgas, refer to the (U.S.) National Fire Protection Association standard, NFPA 58, for storage,handling, and/or container information. For a copy of the LP-gas standard, NFPA 58, contactthe National Fire Protection Association, One Battery Park, Quincy, MA.Compliance Statements | 13DRAFT 8

Navigation menu