Sentilla SENARM01 Zigbee wireless transmitter User Manual OEMModule

Download:
Mirror Download [FCC.gov]
Document ID	1097714
Application ID	cOl7QoIZTfppqtgQunyT8w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.71kB (408831 bits)
Date Submitted	2009-04-16 00:00:00
Date Available	2009-05-01 00:00:00
Creation Date	2009-04-02 14:42:34
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-04-02 16:39:32
Document Title	OEMModule.book
Document Creator	FrameMaker 8.0
Document Author:	Chris

SENARM01
Sentilla OEM Module
User’s Guide
April 2, 2009
Copyrights, Patents, and Trademarks
Copyright © 2007-2009 Sentilla Corporation, 201 Marshall St., Redwood City, CA, U.S.A.
All rights reserved.
Sentilla and the Sentilla logo are trademarks or registered trademarks of Sentilla Corporation in the U. S. and other countries.
Sentilla Corporation has intellectual property rights relating to technology embodied in the product that is described in this document. In
particular, and without limitation, these intellectual property rights may include one or more patents or pending patent applications in the
U.S. and in other countries.
Disclaimer and Limitations of Liability
Sentilla Corporation and its suppliers assume no responsibility for any damage or loss resulting from the use of this guide. Sentilla
Corporation and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this
hardware.. Sentilla and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a result of malfunction
or repairs.
Documentation is provided "as is" and all express or implied conditions, representations, and warranties, including any implied warranty
of merchantability, fitness for a particular purpose or non-infringement, are disclaimed, except to the extent that such disclaimers are held
to be legally invalid.
The ST logo is a registered trademark of STMicroelectronics.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
•
•
ii ••
•
•
Contents
••••••
Chapter 1
Introduction
Theory of Operation
Physical Characteristics
Communication Characteristics
Components
Features
Chapter 2
Usage
Physical Layout
OEM Soldered Connections
Chapter 3
Specifications
Chapter 4
Safety and Regulatory Notices
FCC Compliance Statement
FCC RF Radiation Exposure Statement
Antenna List
10
OEM Requirements
11
10
Contents
•
•
•
•
•
•
iii
iv
•
•
• Contents
•
•
•
List of Figures
••••••
Figure 1: SENARM01
Figure 2: SENARM01 Layout
Figure 3: U. S. Regulatory Label Text
Figure 4: Canadian Regulatory Label Text
11
11
Contents
•
•
•
•
•
•
vi
•
•
• Contents
•
•
•
List of Tables
••••••
Table 1: SENARM01 Overall Dimensions
Table 2: SENARM01 Specifications
Contents
•
•
•
•
•
•
vii
•
•
viii ••
•
•
Contents
Chapter 1
Introduction
••••••
The SENARM01 serves as a building block for other products. This document
provides you with a description of its operation, basic specifications, safety
instructions, and regulatory information.
Theory of Operation
SENARM01 is a data acquisition, processing, and communication chip. It is
designed to acquire data from a variety of sensors, process that data, and
participate in a multihop wireless network. The device uses IEEE 802.15.4
standard for wireless communication.
Physical Characteristics
The module is packaged in an LCC68 form factor. The package pins bring out
analog input signals, digital input and output, and RF interface. The package is
physically shielded. The device buffers all input signals; it sources (or sinks) a
maximum of 25mA across all output pins.
Communication Characteristics
In normal operation, the OEM Module complies with this protocol to implement
various layers of the protocol stack:
• Physical — 802.15.4 PHY - 250 kbps signal in 128 byte packets are encoded
using DSSS. The sequence of chips is modulated using O-QPSK and
transmitted in a 2.4 GHz band.
Sentilla Confidential
Chapter 1
•
•
• 1
•
•
•
SENARM01
Sentilla OEM Module User’s Guide
Components
The device contains two major components:
1. STM32F103 microcontroller from ST Micro
2. CC2520 transceiver from Texas Instruments
•
•
•
•
•
•
Chapter 1
Sentilla Confidential
SENARM01
Sentilla OEM Module User’s Guide
Figure 1: SENARM01
Features
•
•
•
•
•
STM program memory: 512K x 8
Ram: 64K x 8
I/O: 51
Package: LCC68
Maximum clock speed: 72 MHz
Sentilla Confidential
Introduction
•
•
• 3
•
•
•
SENARM01
Sentilla OEM Module User’s Guide
• Dedicated buses: 12
• Battery backup enable
• JTAG/RADIO Pins
•
•
•
•
•
•
Chapter 1
Sentilla Confidential
Chapter 2
Usage
••••••
Physical Layout
Figure 2 shows a high-level layout of the SENARM01 including the STM Chip and
the CC2520 Transceiver, with overall measurements.
Figure 2: SENARM01 Layout
Sentilla Confidential
Chapter 2
•
•
• 5
•
•
•
SENARM01
Sentilla OEM Module User’s Guide
Table 3: SENARM01 Overall Dimensions
SENARM01
Specification
Width
Length
Height
Unit
Minimum
Nominal
Maximum
inches
0.95
095
0.95
mm
25.0
25.0
25.0
inches
.95
.95
.95
mm
25.0
25.
25.
inches
0.067
0.71
0.079
mm
1.7
1.8
2.0
OEM Soldered Connections
SENARM01s can be soldered using standard reflow ovens (including lead-free
soldering) at a maximum temperature of 250 degrees C for 30 seconds. Only use
“No-Clean” solder paste. Do not clean or wash the printed circuit board (PCB)
after soldering. When you use “No-Clean” solder paste, cleaning is not necessary.
For the best connection to the PCB, the solder connection should fill the edgeplated via hole almost to the top.
•
•
•
•
•
•
Chapter 2
Sentilla Confidential
Chapter 3
Specifications
••••••
Table 1: SENARM01 Specifications
Item
Specification
Model name and number
Sentilla OEM Module, SENARM01
Dimensions (W x H x D) inches
.9” x .9“
Unit Weight
Under 1 oz.
Standards
IEEE 802.15.4
Radio / Antennas
TI DN0007 or HyperLink HG2402RD-RSF
Power
Maximum 3.3 Volts
Sentilla Confidential
Chapter 3
•
•
•7
•
•
•
SENARM01
•
•
•
•
•
•
Chapter 3
Sentilla OEM Module User’s Guide
Sentilla Confidential
Chapter 4
Safety and Regulatory Notices
••••••
FCC Compliance Statement
SENARM01 has been designed, constructed, and tested for compliance with FCC
Rules that regulate intentional and unintentional radiators.
CAUTION: The user is not permitted to make any modifications to this equipment
without express approval from Sentilla Inc. Doing so will void the user’s authority
to operate this equipment.
This equipment has been tested and found to comply with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
2 This devices must accept any interference received, including interference that
may cause undesired operation.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed in accordance with the instructions, may cause harmful interference to
radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
However, there is no guarantee that interference will not occur in a particular
installation.
Sentilla Confidential
Chapter 4
•
•
•9
•
•
•
SENARM01
Sentilla OEM Module User’s Guide
FCC RF Radiation Exposure Statement
To comply with the FCC and ANSI C95.1 RF exposure limits, the antenna(s) for
this device must:
• The antenna must operate with a separation distance of at least 20 cm from all
persons using this equipment.
• This transmitter must not be co-located or operating in conjunction with any
other antenna or radio transmitter.
• Installers and end users must follow the installation instructions provided by
the manufacturer.
• End users must be provided with specific operations for satisfying RF
exposure compliance.
Antenna List
This device has been designed to operate with the antennas listed below, and
having a maximum gain of 3.3 dB. Antennas not included in this list or having a
gain greater than 3.3 dB are strictly prohibited for use with this device. The
required antenna impedance is 50 Ohm
Texas Instruments DN0007, maximum gain of 3.3 dB
2 HyperLink Technologies HG2402RD-RSF, maximum gain of 2.2 dB
•
•
10 ••
•
•
Chapter 4
Sentilla Confidential
SENARM01
Sentilla OEM Module User’s Guide
OEM Requirements
The Original Equipment Manufacturer must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the
final product that displays the contents shown in the figure below.
OEMs must test final product with unintentional radiators (FCC section 15.107
and 15.109) before declaring compliance of their final product to Part 15 of the
FCC Rules.
Figure 1: U. S. Regulatory Label Text
Contains FCCID: TOQ SENARM01
The enclosed device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference
that may cause undesired operation.
Figure 2: Canadian Regulatory Label Text
Contains IC Number: 6142A-SENARM01
This Class A digital apparatus complies with Canadian ICES-003
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Sentilla Confidential
Safety and Regulatory Notices
•
•
• 11
•
•
•
SENARM01
•
•
12 ••
•
•
Chapter 4
Sentilla OEM Module User’s Guide
Sentilla Confidential


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : FrameMaker 8.0
Modify Date                     : 2009:04:02 16:39:32-07:00
Create Date                     : 2009:04:02 14:42:34Z
Metadata Date                   : 2009:04:02 16:39:32-07:00
Format                          : application/pdf
Title                           : OEMModule.book
Creator                         : Chris
Document ID                     : uuid:46304f52-f330-4648-b658-1131dbfb173b
Instance ID                     : uuid:146f9f68-850a-4cc0-a0f2-ce8a6c927b34
Page Count                      : 21
Author                          : Chris

EXIF Metadata provided by EXIF.tools