Sercomm 9962MCI 9962 Multi-Standard AP, Metro Cell Indoor User Manual

Sercomm Corporation 9962 Multi-Standard AP, Metro Cell Indoor

UserManual.wiki >

9962MCI User Manual

User Manual.pdf

Title pageAlcatel-Lucent 9962Multi-standard Enterprise Cell v1 | LR14 SCMHardware Installation and Commissioning3MN-02001-0002-RJZZAIssue 0.02 | January 2015DRAFTDRAFT

ContentsAbout this documentPurpose ............................................................................................................................................................................................ viiviiIntended audience ....................................................................................................................................................................... viiviiSupported systems ...................................................................................................................................................................... viiviiHow to use this document ........................................................................................................................................................ viiviiSafety information ...................................................................................................................................................................... viiviiConventions used ....................................................................................................................................................................... viiiviiiRelated information ................................................................................................................................................................... viiiviiiDocument support ...................................................................................................................................................................... viiiviiiTechnical support .......................................................................................................................................................................... ixixHow to comment ........................................................................................................................................................................... ixix1Safety and general informationOverview ...................................................................................................................................................................................... 1-11-1Structure of safety statements ............................................................................................................................................... 1-11-1General hazard statements ..................................................................................................................................................... 1-31-3Basic safety aspects .................................................................................................................................................................. 1-71-72Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 installationOverview ...................................................................................................................................................................................... 2-12-1Pre-installation information .................................................................................................................................................. 2-12-1Mounting guidelines ................................................................................................................................................................ 2-42-4Cabling ....................................................................................................................................................................................... 2-102-103Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 commissioningOverview ...................................................................................................................................................................................... 3-13-1....................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015iiiDRAFTDRAFT

Commissioning process .......................................................................................................................................................... 3-23-24Post-installation activitiesOverview ...................................................................................................................................................................................... 4-14-1Post-installation information ................................................................................................................................................ 4-24-2AProduct conformance statementsOverview ..................................................................................................................................................................................... A-1A-1United States .............................................................................................................................................................................. A-1A-1Environmental requirements ................................................................................................................................................ A-2A-2GlossaryIndexContents........................................................................................................................................................................................................................................................................................................................................................................................................................................................................iv Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

List of figures2-1 9962 MSEC v1.0 antenna ....................................................................................................................................... 2-52-52-2 9962 MSEC v1.0 mounting plate ........................................................................................................................ 2-62-62-3 Notch, groove and lock locations ........................................................................................................................ 2-82-82-4 Mounting plate on the 9962 MSEC v1.0 access point ................................................................................. 2-92-92-5 9962 MSEC v1.0 connectors and antennas ................................................................................................... 2-102-102-6 Example of 4 9962 MSEC v1.0 daisy chain ................................................................................................. 2-142-143-1 9962 MSEC v1.0 front LEDs ................................................................................................................................ 3-33-33-2 9962 MSEC v1.0 WiFi LEDs ............................................................................................................................... 3-53-5....................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015vDRAFTDRAFT

List of figures........................................................................................................................................................................................................................................................................................................................................................................................................................................................................vi Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

About this documentAbout this documentPurposeThe purpose of this document is to provide hardware installation instructions for theAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1 Small Cell access point.Procedures are provided for product handling, placement, powering on and off, andcabling.Intended audienceThe audience for this document is installation personnel.Supported systemsThis document applies to the Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1access point.How to use this documentStart with the first chapter and work through the manual to the end. Once you have donethis, you will have carried out the hardware installation completely and in the propersequence. Before installing the product, the installer should be familiar with the safetyprecautions, warnings, and product conformance statements.Safety informationFor your safety, this document contains safety statements. Safety statements are given atpoints where risks of damage to personnel, equipment, and operation may exist. Failure tofollow the directions in a safety statement may result in serious consequences....................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015viiDRAFTDRAFT

Conventions usedNaming ConventionsThe full product name, Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1, is referredto as one of the following throughout this manual:•Alcatel-Lucent 9962 MSEC•9962 MSEC v1.0•MSECTypographical conventionsThe following typographical convention is used in this document:Appearance DescriptionDocument reference, reference number Related document that is referenced in the documentRelated informationFor information on subjects related to the content of this document, refer to thedocuments listed in the following table:Refer to this document At this location For more information onAlcatel-Lucent 9962Multi-standard EnterpriseCell v1 - TechnicalDescription,3MN-02001-0003-DEZZAhttp://www.alcatel-lucent.com/ The 9962 MSEC v1.0:•Basic characteristics•Hardware description•TroubleshootingDocument supportFor support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent atthe following telephone numbers.From United States•If you are using a landline, a cellular phone or VoIP, dial this number: 1-888-582-3688From other countries•If you are using a cellular phone or VoIP, dial this number: +1-630-224-2485•If you are using a landline (phone without a plus [+] character), replace the plus signwith your country's exit code. Dial this number: Exit code for the country of origin:1-630-224-2485. See the country-specific exit codes listed here.About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................viii Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

These numbers apply for document support only. Please see the section “Technicalsupport” for details about product hardware, software, and technical support.Technical supportFor technical support, contact your local Alcatel-Lucent customer support team. See theAlcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contactinformation.How to commentNote to reviewers: The following "How to comment" text will appear in the finaldocument when it is published. However, the feedback method described below is for useonly on final documents. Please send your review comments to the author using theprocess you were given when you received this draft document.To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-lucent.com/comments/) or e-mail your comments to the Comments Hotline(comments@alcatel-lucent.com).About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015ixDRAFTDRAFT

About this document........................................................................................................................................................................................................................................................................................................................................................................................................................................................................xAlcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

11Safety and generalinformationOverviewPurposeThis chapter provides a generic overview of the standard hazard symbols and statementsthat are currently used in Alcatel-Lucent documentation, and which may appear in thisdocument.ContentsStructure of safety statements 1-1General hazard statements 1-3Basic safety aspects 1-7Structure of safety statementsOverviewThis topic describes the components of safety statements that appear in this document.General structureSafety statements include the following structural elements:...................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20151-1DRAFTDRAFT

Item Structure element Purpose1 Safety alert symbol Indicates the potential for personal injury(optional)2 Safety symbol Indicates hazard type (optional)3 Signal word Indicates the severity of the hazard4 Hazard type Describes the source of the risk of damage orinjury5 Safety message Consequences if protective measures fail6 Avoidance message Protective measures to take to avoid the hazard7 Identifier The reference ID of the safety statement(optional)Signal wordsThe signal words identify the hazard severity levels as follows:Signal word MeaningDANGER Indicates an extremely hazardous situation which, if not avoided, willresult in death or serious injury.WARNING Indicates a hazardous situation which, if not avoided, could result indeath or serious injury.CAUTION Indicates a hazardous situation which, if not avoided, could result inminor or moderate injury.NOTICE Indicates a hazardous situation not related to personal injury.SAMPLELifting this equipment by yourself can result in injurydue to the size and weight of the equipment.Always use three people or a lifting device to transportand position this equipment. [ABC123]CAUTIONLifting hazardSafety and general information Structure of safety statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-2 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

General hazard statementsPurposeProvides information on general hazard statements that may arise in the course of yourwork, but are not necessarily related to a specific procedure.DANGERElectric-shock hazardThis equipment generates high leakage current. This can lead to high voltages withrespect to ground for accessible parts of the installation. Contact with these parts cancause serious health effects, possibly including death, even hours after the event.This equipment is only suited for permanent connection. Before connecting the powersupply, establish a grounding connection.WARNINGElectric-shock hazardContact with energized parts can cause serious injury.At least one other trained person must be in attendance, who can immediately and safelydisconnect the system if necessary.This second person must be trained in first aid for emergency purposes.WARNINGElectric-shock hazardThere is a danger of electric shock if the grounding system is inadequate.You must comply with the grounding requirements for the grounding system.WARNINGElectric-shock hazardContact with energized parts can cause serious injury.Work on energized equipment is only permitted if you are using insulated connectionterminals, are adequately trained and follow safe work practices.Safety and general information General hazard statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20151-3DRAFTDRAFT

WARNINGElectric-shock hazardContact with energized parts can cause serious personal injury.Seal off the installation area (warning tape, signs) to prevent untrained or unauthorizedpersons from entering.Follow safe work practices and lockout/tagout procedures.WARNINGElectric-shock hazardSome parts of all electrical installations are energized. Failure to follow safe workpractices and the safety warnings may lead to bodily injury and property damage.For this reason, only trained and qualified personnel (electrical workers as defined inIEC 60215 or EN 60215 + A1 or in the National Electrical Code or in ANSI/NFPA No.10) may install or service the installation.WARNINGLaser hazardThe light from laser and high-radiance LED’s may cause eye damage if absorbed by theretina.In the US consult ANSI Z136.2, in Europe consult IEC-60825 Safety of laser products, forguidance on the safe use of optical fiber communication systems in the workplace.WARNINGFalling-object hazardCabinet may tip when it is moved if an obstacle or a downward step is encountered.Do not use dolly wheels if the installation location has an uneven surface, steps etc.WARNINGOverhead-load hazardCabinet eyebolts can break, severely damaging the cabinet, if a crane is used to lift thecabinet into an upright position.Ensure that the cabinet is in an upright position before transportation by crane.Safety and general information General hazard statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-4 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

WARNINGInhalation hazardInhalation of asbestos fibers can result in serious illness or death.Buildings constructed before 1980 MAY contain asbestos. Buildings constructed before1970 OFTEN contain asbestos. Potential exposure could occur during routing of cable orwires, removing cables, removing transite or asbestos cement boards, drilling wallboard,transite panels, or floor tiles, removing sprayed-on fireproofing, moving or removingceiling tiles, installing cable hangers.Do not disturb asbestos. If asbestos is present, ensure potential expose is controlled byadhering to local asbestos management regulations and follow safe work practices.NOTICEService-disruption hazardCondensation can occur in the network element during transport, especially on movingfrom outside to closed rooms. Condensation can cause malfunctioning of the circuitpacks.Ensure that circuit packs and shelves have reached room temperature and are dry beforetaking them into operation.NOTICEService-disruption hazardTools left in the work area can cause short circuits during operation which can lead to thedestruction of units.Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,have been left in or on the equipment.CAUTIONLifting hazardLifting this equipment by yourself can result in injury due to the size and weight of theequipment.Always use three people or a lifting device to transport and position this equipment.Safety and general information General hazard statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20151-5DRAFTDRAFT

NOTICEFlammable-material hazardThe heat vent (grill) at the top of the cabinet can become obstructed, preventingventilation of the cabinet.Make sure that the airvent is not obstructed and remains clear at all times.NOTICEESD hazardSemiconductor components can be damaged by static discharges.The following rules must be followed when handling any module containingsemiconductor components:•Wear conductive or antistatic working clothes (for example, a coat made of 100%cotton).•Wear the grounded wrist strap.•Wear shoes with conductive soles on a conductive floor surface or conductive workmat.•Leave the modules in their original packaging until ready for use.•Make sure there is no difference in potential between yourself, the workplace, and thepackaging before removing, unpacking, or packing a module.•Hold the module only by the grip without touching the connection pins, tracks, orcomponents.•Place modules removed from the equipment on a conductive surface.•Test or handle the module only with grounded tools on grounded equipment.•Handle defective modules exactly like new ones to avoid causing further damage.Safety and general information General hazard statements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-6 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

Basic safety aspectsGeneral safety requirementsIn order to keep the technically unavoidable residual risk to a minimum, it is imperativeto observe the following rules:•DO NOT CONNECT CABLES TO WORKING/LIVE EQUIPMENT. Thisactivity should only be performed by the services/delivery team duringintegration.•Transport, storage, installation, and operation of the system must be under specifiedpermissible conditions only. See accompanying documentation and information on thesystem.•Installation, configuration, and disassembly must be carried out only by suitablyqualified personnel and with reference to the respective documentation. Due to thecomplexity of the system, personnel require special training.•Identify potential hazards prior to starting the installation.•The system must be operated by trained and authorized users only. The user must onlyoperate the system after having read and understood the chapter on safety and theparts of the documentation relevant to operation. For complex systems, additionaltraining is recommended. Any obligatory training for operating and service personnelmust be carried out and documented.•Follow all instructions marked on the product, including both general instructions andthe stated methods for avoiding hazards.•The system must not be operated unless safety is guaranteed. Any faults and errorsthat might affect safety must be reported immediately by the user to a person inresponsibility.•The system must only be operated under the environmental conditions and with theconnections, described in the documentation.•Modifications to any part of the system (including software) must be carried out byAlcatel-Lucent or by trained and qualified personnel authorized by Alcatel-Lucent.Unauthorized modifications will lead to a complete exemption from liability. Onlycomponents recommended by the manufacturer and listed in the procurementdocuments should be used.•The use of non-system software is not recommended. The use/installation ofnon-system software can adversely affect the normal functioning of the system.•Only use tested and virus-free data carriers (for example, floppy disks and streamertapes).•The removal or disabling of safety facilities, fault clearance, and maintenance ofequipment must be carried out by trained and qualified personnel only and inconjunction with the respective documentation. Only approved measuring and testequipment must be used.Safety and general information Basic safety aspects........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20151-7DRAFTDRAFT

•Calibrations, special tests after repairs, and regular safety checks must be carried out,documented, and archived.•Follow applicable hazardous waste, electronic scrap, and take-back disposalprocedures.Other important safety instructionsObserve the following safety instructions, they are of particular importance for yoursafety:•Be familiar with evacuation plans and emergency telephone numbers.•Ensure first-aid kits are available.•Wear appropriate personal protective equipment (PPE) such as safety glasses, hardhats, gloves, and fall protection.•Never wear jewelry (rings, bracelets, watches, etc.) when working on or nearenergized equipment.Summary of equipment safety instructionsObserve the following safety instructions while working with the equipment:•This product is to be installed only in restricted access areas.•This product should be only operated from the type of power source indicated on themarking label.•This product must be provided with a readily accessible disconnect device as part ofthe building installation.•Installation must include an independent frame ground drop to the building ground.Refer to the Hardware Installation Guide.•For information on correct mounting instruction, refer to the Hardware InstallationGuide.•Install only equipment identified in the Hardware Installation Guide provided withthis product. Use of other equipment may result in improper connection of circuitryleading to fire or injury to persons.•To reduce the risk of electrical shock, do not disassemble this product. Only trainedpersonnel should install and service this product. Opening or removing covers and/orcircuit boards may expose you to dangerous voltages or other risks. Incorrectreassembly can cause electrical shock when the unit is subsequently used.•Slots and openings in this product are provided for ventilation. To protect the productfrom overheating, these openings must not be blocked or covered. This productshould not be placed in a built-in installation unless proper ventilation is providedSafety and general information Basic safety aspects........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-8 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

•Never push objects of any kind into this product through slots as they may touchdangerous voltage points or short-out parts that could result in risk of fire or electricalshock. Never spill liquids of any kind on the product. Any telecommunicationinterfaces should not leave the building premises unless connected totelecommunication devices providing primary and secondary protection, asapplicable.•Use caution when installing or modifying telecommunication lines.•Never install telecommunication wiring during a lightning storm.•Never install telecommunication connections in wet locations.•Never touch non insulated telecommunication wires or terminals unless thetelecommunication line has been disconnected at the interface.Safety and general information Basic safety aspects........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20151-9DRAFTDRAFT

Safety and general information Basic safety aspects........................................................................................................................................................................................................................................................................................................................................................................................................................................................................1-10 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

22Alcatel-Lucent 9962Multi-standard EnterpriseCell v1 installationOverviewPurposeThis chapter describes the installation procedure for the 9962 MSEC v1.0 access point.ContentsPre-installation information 2-1Mounting guidelines 2-4Cabling 2-10Pre-installation informationIntroductionThe Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1, or 9962 MSEC v1.0, is awireless access point using licensed spectrum delivering improved network reach andincreased capacity while offloading traffic from the macro network.The 9962 MSEC v1.0 supports simultaneous transmission of three different air interfacetechnologies:•LTE•WCDMA•WiFiAs part of the Alcatel-Lucent 9360 Small Cell Solution, it can be deployed in a networksupporting a mix of Home and Enterprise cells.Refer to the Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 - TechnicalDescription, 3MN-02001-0003-DEZZA for complete technical details on the 9962 MSECv1.0 access point....................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20152-1DRAFTDRAFT

Device placementThe Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 has been designed to bedeployed in any (and only) indoor environment :•either in private places such as business offices, warehouses etc,•either in public places such as supermarkets, shopping malls, airports etc.The access point and all its components (including cables and power adaptor) have to beplaced in a dry area and be kept away from any wet or damp environments; such aslavatories or any other areas with exposure to moisture, sprays, drips, or running water.For the safety of stored data, it must not be placed near magnetic devices such as audio orvideo tapes.The 9962 MSEC v1.0 emits a radio signal. The quality of coverage achieved thereforedepends upon where the device is placed.For best results it should be located:•In a central place within the area in which the product is intended to operate,•As high as possible, for example, on high shelving, or mounted on a wall.To improve coverage, avoid installing near the following:•Other radio transmitters•Other metallic devices or objects•WindowsProduct delivery contentsThe 9962 MSEC v1.0 is provided in a standard cardboard box. The contents are asfollows:•The 9962 MSEC v1.0 access point•A wall mounting kit•A quick start guide/user guide•A GPS antenna with 10m cable lengthAncillary itemsIn addition to the standard delivered parts the following ancillary items are available butmust be ordered separately if needed:•SFP transceivers•Data cables•4p PoE compliant with PoH standard adapter•AC to DC power adapter•LockAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationPre-installation information........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-2 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

•Wall mount stick antenna•Jumper type N to SMA cablesInstallation tools requiredThe following is a list of the tools that may be used during installation:•Drill and assorted drill bits•Screwdrivers (power and/or manual)•Measuring tape•Marker, to mark wall mounting holes•Vacuum cleaner or equivalent (required for clearing debris from wall mounting holes)•Spirit levelAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationPre-installation information........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20152-3DRAFTDRAFT

Mounting guidelinesIntroductionThe 9962 MSEC v1.0 has been designed for an effective plug & play installation. Thedevice is based on single hardware core associated with dedicated wall mounting kit.This topic describes the procedures to be followed when installing the 9962 MSEC v1.0access point.PrerequisitesA site survey has been conducted and a location for the device has been selected that isboth central to the available space and elevated in order to maximize coverage.Before installation begins you should ensure the following are in place:•Internet service is available,•The Ethernet cable has been routed and is in place,•Site specific fixing materials according to the mounting (wall or ceiling).Mounting characteristicsRadiated patterns of integrated and attached 9962 MSEC v1.0 antennas are optimized forwall mounting installation.Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationMounting guidelines........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-4 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

Attention: The access point is only supported in the upright orientation with theexternal antennas pointing upward (not downwards or sideways). The externalantennas cannot be flipped. Failure to comply with these requirements wouldchange and degrade the omnidirectional radio frequency pattern.The wall mounting installation is easy and fast: it takes benefit of the small footprint ofthe 9962 MSEC v1.0 access point by offering a small visible size and making itinconspicuous.Important! Various building materials and construction methods dictate that thedevice be fastened to the wall with appropriate mounting hardware. It is theresponsibility of the customer to provide any necessary support material andstructures to ensure that the installation will be in compliance with Building Officialsand Code Administrators (BOCA), Uniform Building Code (UBC), and all localcodes.Figure 2-1 9962 MSEC v1.0 antennaAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationMounting guidelines........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20152-5DRAFTDRAFT

Mounting plateThe 9962 MSEC v1.0 requires a mounting plate to be installed onto the wall.The following figure illustrates the mounting plate.Before you beginNote: Record the 18 digit serial number before mounting the 9962 MSEC v1.0 accesspoint.Mount to wallWARNINGFall hazardFalls can occur when working at heights resulting in serious personal injury or death.To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safework practices and wear appropriate fall protection equipment.Figure 2-2 9962 MSEC v1.0 mounting plateAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationMounting guidelines........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-6 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

To mount the device onto a wall, perform the following steps:...................................................................................................................................................................................................1At the selected installation location, mark the points on the flat surface for the four (4)fixing holes, using the holes in the mounting plate as a guide.Check the horizontal position with a spirit level....................................................................................................................................................................................................2Drill holes at the marked points, and insert wall plugs into the fixing holes....................................................................................................................................................................................................3Attach the mounting plate to the wall using appropriate screw fixings.Note: Depending on the wall the device must be mounted to, different screw fixingsmight be needed. After site survey, these mounting accessories must be procuredlocally....................................................................................................................................................................................................4Connect the cables....................................................................................................................................................................................................5Attach the 9962 MSEC v1.0 to the mounting plate as follows:1. Line up the four grooves in the back of the 9962 MSEC v1.0 with the four notchesprotruding from the mounting plate.The following graphic shows the notches and the lock location on the mounting plate andthe grooves in the back of the 9962 MSEC v1.0:Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationMounting guidelines........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20152-7DRAFTDRAFT

2. Push the 9962 MSEC v1.0 downwards to lock it into position.3. Then screw four (4) screws to attach the 9962 MSEC v1.0 to the mounting plate....................................................................................................................................................................................................6If locks have been ordered by the customer, attach the lock to secure the 9962 MSEC v1.0from removing of the mounting plate.The following graphic shows the mounting plate attached to the back of the 9962 MSECv1.0:Figure 2-3 Notch, groove and lock locationsAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationMounting guidelines........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-8 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

Figure 2-4 Mounting plate on the 9962 MSEC v1.0 access pointAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationMounting guidelines........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20152-9DRAFTDRAFTEND OF STEPS...................................................................................................................................................................................................

CablingPurposeThis topic describes the procedures to be followed when connecting the 9962 MSEC v1.0cables.Cable connectorsThe following picture shows the positions of the different physical connectors andantennas on the 9962 MSEC v1.0 access point:The 9962 MSEC v1.0 access point provides two GE ports for backhaul and daisy chain(refer to “Daisy chain” (p. 2-13) for details about the daisy chaining).One of those ports provides a RJ45 connector and the second port a SFP slot.If the SFP port is already used, it is possible to use the RJ45 port with an adapted SFP.Figure 2-5 9962 MSEC v1.0 connectors and antennasAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationCabling........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-10 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

Power supply and backhaul optionsThe 9962 MSEC v1.0 access point can be powered through:•DC input power with an AC-DC power adapter including an appropriate Jack,•or 4p PoE compliant with PoH standard (following IEEE 802.3 at Power overEthernet standard).If PoE compliant with PoH standard is used to supply the power then a PoE injectoror a PoE capable router can be used.Data cablesEach 9962 MSEC v1.0 access point requires at least one data cable to connect thebackhaul. In case of daisy chain, an additional data cable is required (refer to “Daisychain” (p. 2-13)).The data cable can be a standard Ethernet cable with RJ45 connector or a fiber cable withan optical transceiver.Before you beginEnsure the 9962 MSEC v1.0 access point has been correctly installed.Connect the 9962 MSEC v1.0 cables...................................................................................................................................................................................................1According to the configuration on site, select the appropriate option in the followingtable, and perform the associated procedure:If you want to... Then ...Use an AC-DC power adaptor and a standardrouter,Go to “Connect to a standard DSL router”(p. 2-11) and “Connect the AC-DC poweradapter” (p. 2-12)Use PoE supplied by a DSL router with PoEfunction,Go to “Connect to a DSL router with PoEfunction” (p. 2-12)Connect to a standard DSL routerTo connect the 9962 MSEC v1.0 to a standard DSL router using an Ethernet cablethrough which power is not supplied, perform the following steps:...................................................................................................................................................................................................1Route the Ethernet cable from the 9962 MSEC v1.0 to a standard DSL router.Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationCabling........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20152-11DRAFTDRAFTEND OF STEPS...................................................................................................................................................................................................

...................................................................................................................................................................................................2Connect one end of the Ethernet cable to the 9962 MSEC v1.0....................................................................................................................................................................................................3Connect the other end of the Ethernet cable to the router....................................................................................................................................................................................................4Finally, secure the Ethernet cable to the wall.Connect the AC-DC power adapterIf you intend to use an AC-DC power adapter to supply power to the 9962 MSEC v1.0,perform the following steps:...................................................................................................................................................................................................1Route the power supply cable from the 9962 MSEC v1.0 to the supplied AC-DC poweradapter....................................................................................................................................................................................................2Connect the power supply cable to the 9962 MSEC v1.0....................................................................................................................................................................................................3Finally, secure the power supply cable to the wall.Connect to a DSL router with PoE functionTo connect the 9962 MSEC v1.0 to a DSL router with PoE function, perform thefollowing steps:...................................................................................................................................................................................................1Route the Ethernet cable from the 9962 MSEC v1.0 to a DSL router with PoE function....................................................................................................................................................................................................2Connect one end of the Ethernet cable to the 9962 MSEC v1.0....................................................................................................................................................................................................3Connect the other end of Ethernet cable to the router.Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationCabling........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-12 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFTEND OF STEPS...................................................................................................................................................................................................END OF STEPS...................................................................................................................................................................................................

...................................................................................................................................................................................................4Finally, secure the Ethernet cable to the wall.Connect to the GPS antennaThe GPS antenna is used for synchronization purpose. Perform the following steps toconnect the 9962 MSEC v1.0 to the GPS antenna:...................................................................................................................................................................................................1Route the GPS antenna cable to the 9962 MSEC v1.0 access point....................................................................................................................................................................................................2Connect the GPS antenna cable to the dedicated SMA connector in the 9962 MSEC v1.0....................................................................................................................................................................................................3Finally, secure the GPS antenna cable to the wall.Daisy chainThe 9962 MSEC v1.0 access point can be linked in a daisy chain with up to eight devices.The daisy chain hop is set by connecting the SFP slot of the “Master” access point to theRJ45 port of the “Slave” access point. Therefore, the “Master” SFP slot must be equippedwith an appropriate RJ45 SFP .Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationCabling........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20152-13DRAFTDRAFTEND OF STEPS...................................................................................................................................................................................................END OF STEPS...................................................................................................................................................................................................

Figure 2-6 Example of 4 9962 MSEC v1.0 daisy chainAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1installationCabling........................................................................................................................................................................................................................................................................................................................................................................................................................................................................2-14 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

33Alcatel-Lucent 9962Multi-standard EnterpriseCell v1 commissioningOverviewPurposeThis chapter describes the 9962 MSEC v1.0 commissioning process. The 9962 MSECv1.0 is self commissioning in the case of single device deployments.ContentsCommissioning process 3-2...................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20153-1DRAFTDRAFT

Commissioning processOverviewThe 9962 MSEC v1.0 supports the following technology combinations:•One cell of LTE,•One cell of WCDMA,•One cell of LTE plus one cell of WCDMA.In any of these configurations the 9962 MSEC v1.0 simultaneously supports WiFi thanksto the integrated Motorola WiFi module that supports 802.11n operation.GPS is the primary frequency reference source and is used whenever satellite signal isavailable, fallback is to NTP.PurposeThis section outlines the 9962 MSEC v1.0 zero-touch commissioning process.Related informationIf any problems occur during the commissioning process refer to the following documentfor more details:•Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1 - Technical Description,3MN-02001-0003-DEZZABefore you beginThe 9962 MSEC v1.0 is intended to be installed and then left unattended so the LEDpattern activated in the commissioning process is mainly focused on indicating that theinstallation and initial network connection have succeeded and that the access point isproperly functioning.9962 MSEC v1.0 access point commissioning...................................................................................................................................................................................................1Power on the 9962 MSEC v1.0 access point. All LEDs (Power, LTE, WCDMA and GPS)are solid red: if the software fails to start, the LEDs remain in this condition. Otherwisethe LEDs indicate the progress of the initialization of the unit.Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1commissioningCommissioning process........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-2 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

...................................................................................................................................................................................................2After approximately 2 minutes the 9962 MSEC v1.0 access point will initialize andestablish IPsec connectivity. During this operation the Power status indicator will blinkslowly. Only red at the beginning then toggling red/green once the access point attemptsto contact DNS Internal for HDM/SAM address resolution....................................................................................................................................................................................................3After the 9962 MSEC v1.0 access point has established a network connection it willautomatically update its software and configuration database. This process takesapproximately 15 minutes. During this operation the Power indicator will blink green....................................................................................................................................................................................................4Once the software update has completed the 9962 MSEC v1.0 access point will carry outan automatic reboot. During reboot the Power indicator will still be blinking green....................................................................................................................................................................................................5The access point is ready to enable applications and the Power indicator is solid green....................................................................................................................................................................................................6The 9962 MSEC v1.0 access point starts looking for a GPS signal: the GPS LED isblinking red.Important! If GPS signal is not available, the GPS LED turns off....................................................................................................................................................................................................7A soon as the GPS signal is acquired, the GPS LED goes solid green.Figure 3-1 9962 MSEC v1.0 front LEDsAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1commissioningCommissioning process........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20153-3DRAFTDRAFT

...................................................................................................................................................................................................8If the access point configuration ... Then ...supports one LTE cell go to “LTE commissioning” (p. 3-4)supports one WCDMA cell go to “WCDMA commissioning” (p. 3-4)supports WiFi go to “WiFi commissioning” (p. 3-5)...................................................................................................................................................................................................9After the 9962 MSEC v1.0 access point has been in a normal system state for fifteenminutes, all the non-WiFi LEDs are turned off to avoid bringing attention to the unit.They remain off until one of them changes to an Off-Normal state. As the WiFi LEDs aremanaged by the WiFi module they are not included in this procedure but turned off in aseparate procedure after thirty minutes in the same state.LTE commissioning...................................................................................................................................................................................................1The 9962 MSEC v1.0 access point starts its LTE auto-configuration and self optimisationof the radio access. During this operation the LTE status indicator will blink red/greenuntil the service is operational marked by a solid green LTE status indicator.Important! In case the configuration supports only one LTE cell, the WCDMA LEDis off. If the configuration enables LTE and WCDMA concurrent operation, the LTEand WCDMA commissioning proceed simultaneously....................................................................................................................................................................................................2Return to the Step 8.WCDMA commissioning...................................................................................................................................................................................................1The 9962 MSEC v1.0 access point starts its WCDMA auto-configuration and selfoptimisation of the radio access. During this operation the WCDMA status indicator willblink red/green until the WCDMA service is operational marked by a solid greenWCDMA status indicator.Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1commissioningCommissioning process........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-4 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFTEND OF STEPS...................................................................................................................................................................................................END OF STEPS...................................................................................................................................................................................................

Important! In case the configuration supports only one WCDMA cell, the LTE LEDis off. If the configuration enables WCDMA and LTE concurrent operation, theWCDMA and LTE commissioning proceed simultaneously....................................................................................................................................................................................................2Return to the Step 8.WiFi commissioningThe 9962 MSEC v1.0 integrated WiFi module manages the WiFi LEDs located at the rearof the access point....................................................................................................................................................................................................1As soon as the access point is powered on, the 9962 MSEC v1.0 starts booting and theWiFi LEDs are solid on....................................................................................................................................................................................................2Then the 9962 MSEC v1.0 tries to get adopted by the controller and the 5GHz LED startsblinking slowly. The 2GHz LED related to the 2.4GHz frequency is off....................................................................................................................................................................................................3The controller pushes the configuration. During this operation the both WiFi LEDs willblink quickly until the service is operational marked by a slow blinking WiFi statusindicator.The WiFi service may be operational on a single frequency (2.4GHz or 5GHz) orsimultaneously on the both frequencies.Figure 3-2 9962 MSEC v1.0 WiFi LEDsAlcatel-Lucent 9962 Multi-standard Enterprise Cell v1commissioningCommissioning process........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20153-5DRAFTDRAFTEND OF STEPS...................................................................................................................................................................................................

...................................................................................................................................................................................................4Return to the Step 9.Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1commissioningCommissioning process........................................................................................................................................................................................................................................................................................................................................................................................................................................................................3-6 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFTEND OF STEPS...................................................................................................................................................................................................

44Post-installation activitiesOverviewPurposeThis chapter describes the post-installation activities and checks.ContentsPost-installation information 4-2...................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 20154-1DRAFTDRAFT

Post-installation informationFinal installation checksBefore leaving the installation site, carry out the following:...................................................................................................................................................................................................1Secure all cables along their routes....................................................................................................................................................................................................2Verify that all the exterior conduit and cable connections are secure....................................................................................................................................................................................................3Inspect the site and remove all loose tools, materials, and parts.Post-installation activities Post-installation information........................................................................................................................................................................................................................................................................................................................................................................................................................................................................4-2 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFTEND OF STEPS...................................................................................................................................................................................................

Appendix A: Productconformance statementsOverviewPurposeThis appendix provides the product conformance statements relating to the Alcatel-Lucent9962 MSEC v1.0.ContentsUnited States A-1Environmental requirements A-2United StatesIntroductionThe statements that follow are the product conformance and eco-environmentalstatements that apply to the 9962 MSEC v1.0 when deployed in the United States.Federal Communications CommissionImportant! Changes or modifications not expressly approved by Alcatel-Lucent, Inc.could void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:•This device may not cause harmful interference•This device must accept any interference received, including interference that maycause undesired operation....................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015A-1DRAFTDRAFT

Packaging collection recovery requirementsCountries, states, localities, or other jurisdictions may require that systems be establishedfor the return and/or collection of packaging waste from the consumer, or other end user,or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for thereturn and/or collection of the packaging waste may be established.For more information regarding collection and recovery of packaging and packagingwaste within specific jurisdictions, please contact the Alcatel-Lucent Field Services /Installation - Environmental Health and Safety organization.For technical support, contact your local Alcatel-Lucent customer support team. See theAlcatel-Lucent Support web site http://www.alcatel-lucent.com/support/ for contactinformation.Environmental requirementsEnvironmental factorsThe installation location requires the following environmental factors to be controlled:•Temperature•Humidity•VentilationEnvironmental limitsThe atmosphere in the room that houses the device must be maintained within thefollowing limits:Environmen-tal factorRequirement RangeOperatingtemperatureNormal Operation -5°C to 50°C (23°F to 122°F)•Telcordia GR-63-CORE•Telcordia GR-3108-CORE•ANSI ATIS-0600010.2007Cold start-upOperatingrelativehumidityCondensing 5% to 90%•Telcordia GR-63-CORE•Telcordia GR-3108-CORE•ANSI ATIS-0600010.2007Product conformance statements United States........................................................................................................................................................................................................................................................................................................................................................................................................................................................................A-2 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

Environmen-tal factorRequirement RangeIngress protection NEMA Level 1IP2X of IEC 60529Operatingaltitude0 to 4000m (13 000ft)Vibration NAR Telcordia GR-63-CORE sections4.4.4 & 5.4.2Earthquake Richter scale 7Product conformance statements Environmental requirements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015A-3DRAFTDRAFT

Product conformance statements Environmental requirements........................................................................................................................................................................................................................................................................................................................................................................................................................................................................A-4 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

Glossary...................................................................................................................................................................................................................................Numerics4p PoE4 pair Power over Ethernet...................................................................................................................................................................................................................................AACAlternative Current...................................................................................................................................................................................................................................DDCDirect CurrentDNSDomain Name ServerDSLDigital Subscriber Line...................................................................................................................................................................................................................................EEUEuropean Union...................................................................................................................................................................................................................................GGEGiga EthernetGPSGlobal Positioning System...................................................................................................................................................................................................................................H HDMHome Device Manager...................................................................................................................................................................................................................................IIPInternet Protocol....................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015GL-1DRAFTDRAFT

...................................................................................................................................................................................................................................LLTELong Term Evolution - 4G...................................................................................................................................................................................................................................N NARNorth AmericaNTPNetwork Time Protocol...................................................................................................................................................................................................................................P PoE+Power over EthernetPoHPower-on Hours...................................................................................................................................................................................................................................R RNCRadio Network Controller...................................................................................................................................................................................................................................S SAMService Activation ManagerSFPSmall form-factor pluggable...................................................................................................................................................................................................................................W WCDMAWideband Code Division Multiple AccessWiFiWireless Fidelity (IEEE 802.11b wireless networking)Glossary........................................................................................................................................................................................................................................................................................................................................................................................................................................................................GL-2 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

IndexNumerics9962 MSEC v1.0 installation, 2-1.............................................................AAlcatel-Lucent 9962Multi-standard Enterprise Cell v1cabling, 2-10commissioning, 3-2mounting guidelines, 2-4.............................................................Ddocument support, viii.............................................................Eenvironmental requirements, A-2.............................................................GGeneral hazard statements, 1-3.............................................................Pphone numbersfor document support, viiiPost-installation, 4-2Pre-installation information, 2-1....................................................................................................................................................................................................................................Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015IN-1DRAFTDRAFT

Index........................................................................................................................................................................................................................................................................................................................................................................................................................................................................IN-2 Alcatel-Lucent 9962 MSEC v1.03MN-02001-0002-RJZZA LR14 SCMIssue 0.02 January 2015DRAFTDRAFT

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu