Servis Rhino Lawn Mower Accessory Flex Wing Rotary Cutter Shredder Users Manual SR15, SR10 MASTER PARTS BOOK COVER.p65
Flex-Wing Rotary CutterShredder to the manual 9eea0480-a24f-413e-8564-25a254130bd9
2015-02-02
: Servis-Rhino Servis-Rhino-Lawn-Mower-Accessory-Flex-Wing-Rotary-Cutter-Shredder-Users-Manual-490816 servis-rhino-lawn-mower-accessory-flex-wing-rotary-cutter-shredder-users-manual-490816 servis-rhino pdf
Open the PDF directly: View PDF 
.
Page Count: 88
| Download | |
| Open PDF In Browser | View PDF |
SR15/SR10 FLEX-WING ROTARY CUTTER/SHREDDER P/N 00764578MB Revision 04-06 MASTER PARTS BOOK S/N 10001 TO 11270 PARTS LISTING Rhino® An Alamo Group Company 1020 S. Sangamon Ave. Gibson City, Il 60936 1-800-446-5158 Email: parts@servis-rhino.com © 2006 Alamo Group Inc. TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death. PARTS SECTION Parts Section – 1 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part. 4. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. NOTE: Please refer to The Safety Section in the front of this Manual for the proper Part Number when ordering Replacement Safety Decals. For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: RHINO ® 1020 S. Sangamon Ave. Gibson City, IL 60936 800-446-5158 Email: parts@servis-rhino.com ©2006 Alamo Group Inc. Parts Section – 2 PART NAME INDEX AXLE ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990............................................................................................ 5 BLADE PAN ASSEMBLY - CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 .............................................................. 6 BLADE PAN ASSEMBLY - WING SN 10001 - 11270 APR 1988 - SEPT 1990 ................................................................... 7 CHAIN GUARD ASSEMBLY - FRONT CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990........................... 8 CHAIN GUARD ASSEMBLY - FRONT WING SN 10001 - 11270 APR 1988 - SEPT 1990................................................. 9 CHAIN GUARD ASSEMBLY - REAR CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990 ........................... 10 CHAIN GUARD ASSEMBLY - REAR LEFT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ....................................... 11 CHAIN GUARD ASSEMBLY - REAR RIGHT WING SN 10001 - 11270 APR 1988 - SEPT 1990..................................... 12 CYLINDER ASSEMBLY - CENTER SECTION LIFT SN 10001 - 11270 APR 1988 - SEPT 1990..................................... 13 CYLINDER ASSEMBLY - LEVEL LIFT CENTER SECTION 3 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR ............. 16 CYLINDER ASSEMBLY - LEVEL LIFT CENTER SECTION 3-1/2 x 8 SLAVE SN 10527 - 11270 MAR 1989 - ............... 18 CYLINDER ASSEMBLY - LEVEL LIFT LEFT WING 2-1/2 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR 1................ 14 CYLINDER ASSEMBLY - LEVEL LIFT LEFT WING 3 x 8 SLAVE SN 10527 - 11270 MAR 1989 - SEPT 1990 .............. 17 CYLINDER ASSEMBLY - LEVEL LIFT RIGHT WING 2-3/4 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR................. 15 CYLINDER ASSEMBLY - LEVEL LIFT RIGHT WING 3-1/4 x 8 SLAVE SN 10527 - 11270 MAR 1989 - SEPT............... 19 CYLINDER ASSEMBLY - WING SECTION LIFT SN 10001 - 11270 APR 1988 - SEPT 1990.......................................... 20 DEFLECTOR - REAR LEFT AND RIGHT WING SN 10001 - 11270 APR 1988 - SEPT 1990 .......................................... 21 DEFLECTOR - RUBBER CENTER SECTION REAR SN 10001 - 11270 APR 1988 - SEPT 1990 ................................... 22 DEFLECTOR - RUBBER FRONT CENTER SN 10001 - 11270 APR 1988 - SEPT 1990.................................................. 23 DEFLECTOR - RUBBER FRONT WING SN 10001 - 11270 APR 1988 - SEPT 1990....................................................... 24 DEFLECTOR - RUBBER LH RH CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ................................................... 25 DRIVELINE ASSEMBLY - CAT 4 WING SN 10001 - 11209 APR 1988 - MAR 1990......................................................... 26 DRIVELINE ASSEMBLY - CAT 4 WING SN 11210 - 11270 APR 1988 - MAR 1990......................................................... 27 DRIVELINE ASSEMBLY - CAT 5 WING SN 10001 - 10979 APR 1988 - MAR 1990......................................................... 28 DRIVELINE ASSEMBLY - CAT 5 WING SN 10980 - 11270 MAR 1990 - SEPT 1990....................................................... 29 DRIVELINE ASSEMBLY - INTERMEDIATE SN 10001 - 11270 APR 1988 - SPET 1990.................................................. 30 DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 10001 - 11000 APR 1988 - SEPT 1990 ........................................... 32 DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ........................................... 33 DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 11001 - 11270 APR 1990 - SEPT 1990 ........................................... 34 DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 10001 - 11000 APR 1988 - APR 1990 ............................................... 35 DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 10001 - 11270 APR 1998 - SEPT 1990 ............................................. 36 DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 11001 - 11270 APR 1990 - SEPT 1990 ............................................. 37 DRIVELINE ASSEMBLY - MAIN 44R 540/1000 RPM SN 10001 - 11270 APR 1988 - 1990 ............................................. 31 GEARBOX ASSEMBLY - CENTER SECTION 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ........................... 44 GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 10001 - 11100 APR 1988 - MAR 1990 .............................................. 46 GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 .............................................. 48 GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 10001 - 11100 APR 1988 - MAR 1990 ................................................ 50 GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 ................................................ 52 GEARBOX ASSEMBLY - LEFT WING 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990........................................ 54 GEARBOX ASSEMBLY - 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990............................................................. 38 GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990......................................................... 40, 42 HOSE BRACKET ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990....................................................................... 56 HYDRAULIC VALVE ASSEMBLY - CLOSED CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ............................... 57 HYDRAULIC VALVE ASSEMBLY - CONVERSION PLUG SN 10001 - 11270 APR 1988 - SEPT 1990........................... 58 HYDRAULIC VALVE ASSEMBLY - DETENT W/SPRING ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990........ 59 HYDRAULIC VALVE ASSEMBLY - NON-ADJUSTABLE RELIEF SN 10001 - 11270 APR 1988 - SEPT 1990.......... 60, 61 HYDRAULIC VALVE ASSEMBLY - OPEN/CLOSED CENTER VALVE SN 10001 - 11270 APR 1988 - SEPT 1990 ....... 62 JACK ASSEMBLY - TOP WIND SN 10001 - 11270 APR 1988 - SEPT 1990 .................................................................... 63 LEVEL ROD ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990............................................................................... 64 LIFT SCREW SN 10001 - 11270 APR 1988 - SEPT 1990.................................................................................................. 65 MAINFRAME COMPONENTS S/N 10001 - 11270 APR 1988 - SEPT 1990 ...................................................................... 66 SAFETY SHIELD ASSEMBLY SN 10001 - 11100 APR 1988 - MAR 1990 ........................................................................ 67 SAFETY SHIELD ASSEMBLY SN 11101 - 11270 MAR 1990 - OCT 1990 ........................................................................ 68 SKID SHOE & SIDE SKIRT - OFFSET MODELS SN 10001 - 11270 APR 1988 - SEPT 1990......................................... 69 SKID SHOE & SIDE SKIRT ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ...................................................... 71 SKID SHOE - CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990 ................................................................ 70 SLIP CLUTCH ASSEMBLY - SERIES 6 SN 10001 - 11270 APR 1988 - SEPT 1990........................................................ 72 SLIP CLUTCH ASSEMBLY - SERIES 8 SN 10001 - 11270 APR 1988 - SEPT 1990........................................................ 73 SPRING POD ASSEMBLY - CENTER AXLE SN 10001 - 11270 APR 1988 - SEPT 1990................................................ 74 SPRING POD ASSEMBLY - OUTBOARD AXLE SN 10001 - 11270 APR 1988 - SEPT 1990 .......................................... 75 TIRE SN 10001 - 11270 APR 1988 - SEPT 1990 ............................................................................................................... 76 TONGUE ASSEMBLY USED ON C.V. DRIVELINE SN 10001 - 11270 APR 1988 - SEPT 1990 .................................... 78 TONGUE ASSEMBLY USED ON 44R DRIVELINE SN 10527 - 11270 MAR 1989 - SEPT 1990 ..................................... 77 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 3 PART NAME INDEX WEIGHT BOX SN 10001 - 11270 APR 1988 - SEPT 1990 ................................................................................................ 79 WHEEL HUB ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ............................................................................. 80 WINCH & HOLD DOWN STRAP SN 10001 - 11270 APR 1988 - SEPT 1990 ................................................................... 81 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 4 AXLE ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756981 00756976 00756978 00756977 00756686 00756975 00756694 20BH5012 15B1600 65106A4 02782000 00037200 00756700 00756693 00756687 1 1 1 1 1 1 1 4 4 2 4 4 2 2 2 CENTER AXLE ASSY SINGLE CENTER AXLE ASSY DUAL RIGHT AXLE ASSY LEFT AXLE ASSY WLDMT, CENTER AXLE * OUTBOARD AXLE WLDMT RIGHT OUTBOARD AXLE WLDMT LEFT PIN-SPIRAL 5/16 X 1 1/2 * WASHER 1 SAE P * WLDMT,AXLE PIVOT PIN * SHCS 3/4 NC 3-3/4 PL8 * NUT TOPLOCK 3/4 NC PLC * PIN-AXLE PIVOT WLDMT CENTER SECTION-SINGLE SPINDLE DOUBLE SPINDLE AXLE ARM 2 3 4 5 6 7 8 9 10 11 12 13 14 *Parts included in Axle Assembly w/Hubs for Center Axle PN 00756981 or PN 00756976. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 5 BLADE PAN ASSEMBLY - CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 00756698 0582010330 582013 571044 0656150200 571045 5GL16140 1 2 2 4 2 2 2 WLDMT, CTR SECTION BLADE PAN BLADE, CCW FAN BLADE, CCW/CW FLAT BOLT SHOULDER ORDER 70 MIN HT WASHER WASHER LOCKNUT 1 -14 LH TLN PL 3 4 5 6 NOTE: Center Blades CCW Rotation SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 6 BLADE PAN ASSEMBLY - WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 00756699 0652010330 0622010330 0652010030 571044 0656150200 571045 5GL16140 1 2 2 4 4 2 2 2 WLDMT, WING BLADE PAN BLADE, CW FAN BLADE, CCW FAN BLADE, CCW/CW FLAT BOLT SHOULDER ORDER 70 MIN HT WASHER WASHER LOCKNUT 1 -14 LH TLN PL 3 4 5 6 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 7 CHAIN GUARD ASSEMBLY - FRONT CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM 1 2 3 1 2 3 1 2 3 PART NO. QTY. DESCRIPTION 00756985 02030700 00002700 00001800 -------------00756989 02030700 00002700 00001800 ------------00756987 02030700 00002700 00001800 3 3 3 CENTER SECTION - FRONT HHCS 1/2-13UNC 1-1/4 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB --------------------------------------------CENTER SECTION RH FRONT HHCS 1/2-13UNC 1-1/4 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB --------------------------------------------CENTER SECTION LH FRONT HHCS 1/2-13UNC 1-1/4 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB 2 2 2 2 2 2 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 8 CHAIN GUARD ASSEMBLY - FRONT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 00756986 00756688 00751126 0652100202 02030700 00002700 00001800 1 64 1 7 7 7 WING CHAIN GUARD ASSY WING CHAINGUARD BAR CHAIN 5/16 WLD 6 LINK ROD CHAIN HHCS 1/2-13UNC 1-1/4 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 9 CHAIN GUARD ASSEMBLY - REAR CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 00756988 00756892 00755090 00757142 00002500 00011100 00015800 00751126 1 54 1 8 8 8 2 CENTER SECTION-REAR CHAINGUARD CENTER SECTION CHAINGUARD BAR CHAIN 5/16- 5 LINKS WLD ROD, CENTER SECT. REAR C.G. SHCS 3/8 NC 1-1/4 PL5 FLATWASHER 3/8 PL STD NUT,TOPLOCK 3/8NC PLB CHAIN 5/16 WLD 6 LINK SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 10 CHAIN GUARD ASSEMBLY - REAR LEFT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 12 13 0652110300 0652110310 00751126 0652110201 00013300 00002700 00001800 00756876 652053 00752680 7A81336 02030700 1 1 110 2 2 10 10 2 8 6 2 4 LEFT REAR WING CHN GD MOUNTING BRKT, LEFT CHAIN 5/16 WLD 6 LINK ROD CHAIN HEXB 1/2 NC 2 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB WING REAR COVER SPACER HHCS 1/2-13UNC X 4LG PL5 C/S1/2 X 4-1/2 NC PL5 HHCS 1/2-13UNC 1-1/4 PL5 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 11 CHAIN GUARD ASSEMBLY - REAR RIGHT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 12 13 0652110200 0652110210 00751126 0652110201 00013300 00002700 00001800 00756876 652053 00752680 7A81336 02030700 1 1 110 2 2 10 10 2 8 6 2 4 RT REAR CHN GD ASSY MOUNTING BRKT, RIGHT CHAIN 5/16 WLD 6 LINK ROD CHAIN HEXB 1/2 NC 2 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB WING REAR COVER SPACER HHCS 1/2-13UNC X 4LG PL5 C/S1/2 X 4-1/2 NC PL5 HHCS 1/2-13UNC 1-1/4 PL5 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 12 CYLINDER ASSEMBLY - CENTER SECTION LIFT SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 8727 B651302 94514 7329 8755 8751 8753 8752 00013901 00023100 8754 4690W 8757 8756 4675W 8354 162012 6511324 8763 1 1 1 1 1 1 1 1 1 1 8 1 4 1 2 2 1 - HYDRAULIC CYLINDER, T HOSE #6 - 8MP - 8MP - 180LG ADAPTER, HYD, ELBOW SWIVEL ADAPTER, HYD, STGHT RESTRICTOR CAP (HYD. CYLINDER) PISTON PISTON ROD TUBE (HYD. CYLINDER) NUT HEX 3/8 NC PL HHCS 3/8 -16UNC 1-1/2 PL5 CLEVIS,OUTER INSTALL SHEET-BELT TENSIONER&S HEAD TIE ROD MANUAL-SR320 P/T HAY RAKE PIN-HYD. CYLINDER PIN,COTTER BREATHER,1/2 SQ HD CORED SEAL KIT SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 13 CYLINDER ASSEMBLY - LEVEL LIFT LEFT WING 2-1/2 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR 1 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 14 15 16 17 18 0652141500 0652141506 0652141502 0652141503 0652140305 0652141404 0652141501 0652140307 0652141540 691356 163016 0652141311 691302 B651302 6513015 B65113A2 94514 1 1 1 4 1 1 1 1 2 4 4 1 1 1 1 6 CLY, LEVEL LIFT CLEVIS,BASE BARREL GLAND TIEROD,HYD CYL W/NUT PISTON ROD CLEVIS, ROD SEAL KIT PIN PIN, COTTER 3/16 X 2 ADP HYD STGHT 8MB - 8FP HYD HOSE-3/8-8W/(1/2FITTING HOSE #6 - 8MP - 8MP - 180LG HOSE #6 - 8 MP - 8 MP 216 LG HYD HOSE ONE ADAPTER, HYD, ELBOW SWIVEL SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 14 CYLINDER ASSEMBLY - LEVEL LIFT RIGHT WING 2-3/4 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 14 15 16 17 18 0652141400 0652141406 0652141402 0652141403 0652140305 0652141404 0652141401 0652140307 0652141440 691356 163016 0652141311 691302 B651302 6513015 B65113A2 94514 1 1 1 4 1 1 1 1 2 4 2 1 1 1 1 6 HYD CYL KIT CLEVIS,BASE TUBE HYD CYL GLAND,ROD END TIEROD,HYD CYL W/NUT PISTON ROD,PISTON CLEVIS, ROD SEAL KIT PIN PIN, COTTER 3/16 X 2 ADP HYD STGHT 8MB - 8FP HYD HOSE-3/8-8W/(1/2FITTING HOSE #6 - 8MP - 8MP - 180LG HOSE #6 - 8 MP - 8 MP 216 LG HYD HOSE ONE ADAPTER, HYD, ELBOW SWIVEL SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 15 CYLINDER ASSEMBLY - LEVEL LIFT CENTER SECTION 3 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 0652141300 0652141306 0652141302 0652141303 0652140305 0652141304 0652141301 0652140307 0652141340 691356 163016 0652140320 691302 B651302 6513015 B65113A2 94514 1 1 1 4 1 1 1 1 2 4 1 1 1 1 1 6 HYD CYL KIT BUTT BARREL GLAND TIEROD,HYD CYL W/NUT PISTON ROD CLEVIS, ROD SEAL KIT PIN PIN, COTTER 3/16 X 2 STROKE CONTROL HYD HOSE-3/8-8W/(1/2FITTING HOSE #6 - 8MP - 8MP - 180LG HOSE #6 - 8 MP - 8 MP 216 LG HYD HOSE ONE ADAPTER, HYD, ELBOW SWIVEL SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 16 CYLINDER ASSEMBLY - LEVEL LIFT LEFT WING 3 x 8 SLAVE SN 10527 - 11270 MAR 1989 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 8721 8784 4675M 8780 8781 8753 8754 8785 4376 8786 8766 8354 163016 94514 691302 B651302 6513015 B65113A2 1 1 1 1 1 1 4 8 1 1 2 4 1 1 1 1 1 CYL HYD LEVEL LIFT 3 DIA CAP (HYD. CYLINDER) NUT PISTON PISTON TUBE PISTON ROD CLEVIS,OUTER TIE ROD NUT HEX 1/2-20 NF PL HEAD SEAL KIT PIN-HYD. CYLINDER PIN, COTTER 3/16 X 2 ADAPTER, HYD, ELBOW SWIVEL HYD HOSE-3/8-8W/(1/2FITTING HOSE #6 - 8MP - 8MP - 180LG HOSE #6 - 8 MP - 8 MP 216 LG HYD HOSE ONE SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 17 CYLINDER ASSEMBLY - LEVEL LIFT CENTER SECTION 3-1/2 x 8 SLAVE SN 10527 - 11270 MAR 1989 - ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 8719 8772 4705M 8768 8769 4706 8754 8773 4689 8774 8764 8354 163016 94514 691302 B651302 6513015 B65113A2 1 1 1 1 1 1 4 8 1 1 2 4 1 1 1 1 1 HYDRAULIC CYLINDER CAP NUT PISTON PISTON TUBE PISTON ROD CLEVIS,OUTER TIE ROD NUT HEX 9/16-18NF PL HEAD SEAL KIT PIN-HYD. CYLINDER PIN, COTTER 3/16 X 2 ADAPTER, HYD, ELBOW SWIVEL HYD HOSE-3/8-8W/(1/2FITTING HOSE #6 - 8MP - 8MP - 180LG HOSE #6 - 8 MP - 8 MP 216 LG HYD HOSE ONE SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 18 CYLINDER ASSEMBLY - LEVEL LIFT RIGHT WING 3-1/4 x 8 SLAVE SN 10527 - 11270 MAR 1989 - SEPT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 8720 8778 4705M 8775 8776 4706 8754 8773 4689 8779 8765 8354 163016 94514 691302 B651302 6513015 B65113A2 1 1 1 1 1 1 4 8 1 1 2 4 1 1 1 1 1 HYDRAULIC CYLINDER CAP NUT PISTON PISTON TUBE PISTON ROD CLEVIS,OUTER TIE ROD NUT HEX 9/16-18NF PL HEAD SEAL KIT PIN-HYD. CYLINDER PIN, COTTER 3/16 X 2 ADAPTER, HYD, ELBOW SWIVEL HYD HOSE-3/8-8W/(1/2FITTING HOSE #6 - 8MP - 8MP - 180LG HOSE #6 - 8 MP - 8 MP 216 LG HYD HOSE ONE SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 19 CYLINDER ASSEMBLY - WING SECTION LIFT SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO. QTY. DESCRIPTION 8728 00756496 94517 7329 94507 8755 8751 8759 8758 00013901 00023100 8754 4690W 8757 8761 4675W 8354 162012 6511324 8763 1 1 1 1 1 1 1 1 1 1 1 8 1 4 1 2 2 1 - HYDRAULIC CYLINDER HOSE-#4-6MP-6MP-216LG ADAPTER, HYD, ELBOW SWIVEL ADAPTER, HYD, STGHT RESTRICTOR ADAPTER, HYD, REDUCER CAP (HYD. CYLINDER) PISTON PISTON ROD TUBE (HYD. CYLINDER) NUT HEX 3/8 NC PL HHCS 3/8 -16UNC 1-1/2 PL5 CLEVIS,OUTER INSTALL SHEET-BELT TENSIONER&S HEAD TIE ROD MANUAL-SR320 P/T HAY RAKE PIN-HYD. CYLINDER PIN,COTTER BREATHER,1/2 SQ HD CORED SEAL KIT SEAL KIT NOTE: This cylinder is used on non-hydraulic level lift wing. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 20 DEFLECTOR - REAR LEFT AND RIGHT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00756876 00002700 00001800 02030700 2 10 10 4 WING REAR COVER FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB HHCS 1/2-13UNC 1-1/4 PL5 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 21 DEFLECTOR - RUBBER CENTER SECTION REAR SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 4 5 6 00756993 00756877 00756875 63066100 63065400 00015800 1 1 11 11 11 REAR RUBBER SHIELD KIT REAR FLAP-CENTER SECTION FLAP HOLD DOWN BAR HHCS 3/8NCX1-1/2 FLATWASHER 3/8 PL HEAVY NUT,TOPLOCK 3/8NC PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 22 DEFLECTOR - RUBBER FRONT CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00758261 00758263 02030700 00001800 1 1 3 3 BAND RUBBER GD SR15 FRT CTR PANEL RUBBER GD SR15 FRT CTR HHCS 1/2-13UNC 1-1/4 PL5 LOCKNUT TLM 1/2 NC PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 23 DEFLECTOR - RUBBER FRONT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00758264 00758259 02030700 00001800 1 1 7 7 PANEL RUBBER GD SR15 WING BAND RUBBER GD SR15 FRT WG HHCS 1/2-13UNC 1-1/4 PL5 LOCKNUT TLM 1/2 NC PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 24 DEFLECTOR - RUBBER LH RH CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00758262 00758260 02030700 00001800 1 1 2 2 PANEL RUBBER GD SR15 L&R CTR BAND, RUBBER GD SR15 LH & RH HHCS 1/2-13UNC 1-1/4 PL5 LOCKNUT TLM 1/2 NC PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 25 DRIVELINE ASSEMBLY - CAT 4 WING SN 10001 - 11209 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 00756583 00757051 00757052 00752896 00754335 00755610 00775330 00775313 00759217 8393 00775319 00775332 00756075 00754153 00754167 00755444 00755445 00754154 00761075 1 1 2 1 2 1 1 6 1 1 1 1 1 1 1 2 1 1 DRIVESHAFT, WING YOKE 1-3/4-20 #6 SLIDE COLLAR KIT-SLIDE COLLAR REPAIR CROSS BEARING SERIES 6 GREASE FITTING FOR TUBE GREASE FTG.ELBOW 8MMP1.0 90 DRIVELINE IMPLEMENT HALF CAT 4 DRIVELINE TRACTOR HALF CAT 4 SCREW 1/2 LG END BEARING RING SHIELD OUTER HALF SHIELD INNER HALF CLUTCH & YOKE SERIES 6 YOKE INNER #6 PIN-ROLL #6 10MM X 75MM OUTER TUBE, INNER 15-IV WING DS TUBE OUTER 15-IV WING DS YOKE-OUTER TUBE #6 SPRING,CENTERING NOTE: Triangle Shaped Shaft & Tube; This Driveline has yellow shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 26 DRIVELINE ASSEMBLY - CAT 4 WING SN 11210 - 11270 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 00759213 00757051 00757052 00752896 00754335 00755610 00775330 00775313 00759217 8393 00775319 00775332 00756075 00754153 00754167 00755444 00755445 00754154 00761075 1 1 2 1 2 1 1 2 1 1 1 1 1 1 1 2 1 1 DRIVELINE YOKE 1-3/4-20 #6 SLIDE COLLAR KIT-SLIDE COLLAR REPAIR CROSS BEARING SERIES 6 GREASE FITTING FOR TUBE GREASE FTG.ELBOW 8MMP1.0 90 DRIVELINE IMPLEMENT HALF CAT 4 DRIVELINE TRACTOR HALF CAT 4 SCREW 1/2 LG END BEARING RING SHIELD OUTER HALF SHIELD INNER HALF CLUTCH & YOKE SERIES 6 YOKE INNER #6 PIN-ROLL #6 10MM X 75MM OUTER TUBE, INNER 15-IV WING DS TUBE OUTER 15-IV WING DS YOKE-OUTER TUBE #6 SPRING,CENTERING NOTE: Triangle Shaped Shaft & Tube; This Driveline has black shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 27 DRIVELINE ASSEMBLY - CAT 5 WING SN 10001 - 10979 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 00756582 00753908 00757052 00753068 00754335 00755610 00756539 00757057 00754330 00754332 00754331 00753892 00753893 00754369 00756173 00757379 00757378 1 1 2 1 2 1 1 6 1 1 1 1 1 1 1 1 DRIVELINE,WING SERIES 80 W/SPL YOKE, SERIES 8 1-3/4-20 SPLIN KIT-SLIDE COLLAR REPAIR CROSS BEARING SERIES 8 GREASE FITTING FOR TUBE GREASE FTG.ELBOW 8MMP1.0 90 HALF DRIVESHAFT W/CLUTCH FOR PTO MALE WITH SAFETY GUARD BOLT, NYLON - SAFETY SHIELD LOCKING COLLAR OUTER SHIELD LOCKING COLLAR INNER SHIELD SHIELD KIT OUTER SHIELD KIT INNER SHIELD COMPLETE CLUTCH & YOKE SERIES 8 YOKE W/INNER SHAFT YOKE & TUBE ASSY OUTER NOTE: Spline Shaft and Tube are no longer available as Assembly; Replace with PN 00757375 Assembly. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 28 DRIVELINE ASSEMBLY - CAT 5 WING SN 10980 - 11270 MAR 1990 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 00757375 00753908 00757052 00753068 00754335 00755610 00757376 00757377 00754330 00754332 00754331 00753892 00753893 00754369 00756173 00757379 00757378 1 1 2 1 2 1 1 6 1 1 1 1 1 1 1 1 DRIVELINE 44R W/1-3/4X20 YOKE, SERIES 8 1-3/4-20 SPLIN KIT-SLIDE COLLAR REPAIR CROSS BEARING SERIES 8 GREASE FITTING FOR TUBE GREASE FTG.ELBOW 8MMP1.0 90 PTO OUTER W/SAFETY GUARD D/L INNER HALF W/SAFETY GUARD BOLT, NYLON - SAFETY SHIELD] LOCKING COLLAR OUTER SHIELD LOCKING COLLAR INNER SHIELD SHIELD KIT OUTER SHIELD KIT INNER SHIELD COMPLETE CLUTCH & YOKE SERIES 8 YOKE W/INNER SHAFT YOKE & TUBE ASSY OUTER NOTE: Triangle Shaped Shaft & Tube; This Driveline has yellow shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 29 DRIVELINE ASSEMBLY - INTERMEDIATE SN 10001 - 11270 APR 1988 - SPET 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 00756581 00757049 00752896 00754399 00756075 00755610 1 2 1 1 2 DRIVESHAFT,INTERMEDIATE OUTER YOKE 1-3/4-20 CROSS BEARING SERIES 6 FLANGED DOUBLE YOKE * CLUTCH & YOKE SERIES 6 GREASE FTG.ELBOW 8MMP1.0 90 * This Flange Assembly has 8 bolts in it - Category 4 x-kits. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 30 DRIVELINE ASSEMBLY - MAIN 44R 540/1000 RPM SN 10001 - 11270 APR 1988 - 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 00758814 W827A W840 00758815 00758816 00759212 W802B W802B9 W815R W825A W821A W812A 00749960 0650000100 8391 00600700 00010300 00010400 7AH882026 00001300 00001200 00760519 00752670 1 1 2 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D/L 44R SQ SHFT 29PAINT BLACK YOKE,CLP,1-3/4-20SP PAINT BLK CROSS REPR KIT DRIVELINE SHAFT & YOKE 44R 29 SHIELD OUTHE 29-1/8 LG 44R RETAINER, NYLON BEARING HSG,SHLD,QD YK PAINT BLACK HSG,SHLD,21T CL YK PAINT BLACK SHLD IN ASSY PAINT BLACK YOKE 1-3/8-21 PAINT BLACK YOKE,Q.D. 6BSPLN PAINT BLACK YOKE SLEEVE PAINT BLACK KIT,Q.D. REPAIR 1801 1802 1803 KIT-QD PIN, TRAILING PIN Q.D. COLLAR KIT HEXB 5/8 NC 3-1/4 PL5 LOCKWASHER 5/8 PL STD NUT 5/8 NC HEX PL C/S 1/2 X 3 1/4 NF 8 LOCKWASHER 1/2 PL STD NUT,HEX 1/2 NC PL RING, BEARING GREASE FITTING 1/4-28 BOLT THD 8 9 10 11 12 13 14 15 16 17 18 19 20 21 NOTE: Square Shaft & Round Housing. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 31 DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 10001 - 11000 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 8 9 11 12 13 14 15 16 17 18 19 20 21 22 00755751 00753908 00753286 00759119 00752881 00753070 00753071 00753073 00755751 00755610 00753077 00755750 00755075 00753082 00753068 00758159 00758160 00760452 00759112 00757818 00757817 1 2 1 5 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 CV DRIVELINE,1000,1-3/8-21YOKE YOKE, SERIES 8 1-3/4-20 SPLIN CROSS & BEARING KIT #8-CV YOKE-COLLAR & SNAP RING GREASE FITTING OUTER TUBE W/YOKE SERIES 8 MOWER HALF ASMBLY (1-3/4-20) INNER TUBE W/YOKE SERIES 8 DRIVELINE,1000 CV CAT5 1-3/8GREASE FTG.ELBOW 8MMP1.0 90 N/A FROM VENDOR YOKE, 1-3/8-21 SPLINE (1000RPM PUSH PIN SET COMPLETE SAFETY SHIELD CROSS BEARING SERIES 8 PIN,ROLL 3-1/2 LG PIN, ROLL 3 LG DRIVELINE,540 CV CAT 5 1-3/8-6 YOKE,INNER TUBE TUBE,INNER D/L TUBE,OUTER D/L NOTE: Part No. 00755751 is no longer available as assembly. Replace by PN 00760453. Parts WILL NOT interchange between assemblies; Triangle Shaft and Tube. The Driveline has yellow shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 32 DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 24 25 26 PART NO. QTY. DESCRIPTION 00760453 8478 8482 8382 7432 7433 8384 00760632 00760634 8489 00760636 8486 8393 00760640 00760641 7420 8949 8949 00759217 0921000345 00756005 00756004 8974 8391 00759556 00760665 00760667 1 1 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 8 1 1 1 1 1 1 1 1 DRIVELINE,1000 CV CAT5 1-3/8YOKE 1-3/8 21-SP DOUBLE YOKE FITTING,GREASE M8 X 1 YOKE-INBOARD CROSS & BEARING KIT SPRING PIN 10MM X 90MM PROFILE-INNER SAGA PROFILE & SLEEVE W.A. INBOARD YOKE YOKE 1-3/4-20 SPLINE A.S. CROSS & BEARING KIT BEARING RING TUBE, OUTER SHIELD OVL TUBE,INNER SHIELD ROUND ASSY-BEARING & CV CONE SHIELD CONE SHIELD CONE SCREW 1/2 LG END CHAIN, SAFETY DECAL-ROTATING DRIVELINE DECAL-SHIELD MISSING SUPPORT BEARING Q.D. COLLAR KIT KIT, SLIDE COLLAR DRIVELINE-TRACTOR HALF PART OF DRIVELINE IMPLEMENT HALF PART NOTE: This is a replacement D/L NOT used on Production Model. Parts WILL NOT interchange with earlier driveline; Star shaft and tube. This driveline has black shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 33 DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 11001 - 11270 APR 1990 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 00759242 00759232 00759233 00759234 00760453 00759236 00759237 1442 00759238 W827A W840 00759239 00759240 00759241 4571 00760452 00760452 02961453 1 1 2 1 1 1 4 1 1 1 1 1 3 1 1 1 2 CV DRIVELINE,1000,1-3/8-21YOKE SCQD YOKE 1000 RPM BODY, ASY KIT, CROSS & BEARING DRIVELINE,1000 CV CAT5 1-3/8SHIELD, BELL TUBE-SHIELD BEARING, NYLON OUTER SHIELD BRG-NYLON YOKE,CLP,1-3/4-20SP PAINT BLK CROSS REPR KIT YOKE & SHAFT SHIELD-INNER SHIELD BRG SLIDE COLLAR KIT DRIVELINE,540 CV CAT 5 1-3/8-6 DRIVELINE,540 CV CAT 5 1-3/8-6 GREASE FITTING 1/4-28 TAPER 45 NOTE: Part No. 00759242 is no longer available as assembly. Replace by PN 00760453. Parts WILL NOT interchange between assemblies; Spline Shaft and Tube. The Driveline has black shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 34 DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 10001 - 11000 APR 1988 - APR 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 4 5 6 8 9 11 12 13 14 15 16 00754009 00753908 00753286 00752881 00753070 00753071 00753073 00753074 00755610 00760452 00753078 00755075 00753082 00753068 1 2 5 1 1 1 1 1 1 1 2 1 1 CV DRIVELINE 540,1-3/8-6 YOKE YOKE, SERIES 8 1-3/4-20 SPLIN CROSS & BEARING KIT #8-CV GREASE FITTING OUTER TUBE W/YOKE SERIES 8 MOWER HALF ASMBLY (1-3/4-20) INNER TUBE W/YOKE SERIES 8 TRAC HALF 540 CV D/L GREASE FTG.ELBOW 8MMP1.0 90 DRIVELINE,540 CV CAT 5 1-3/8-6 YOKE,1-3/8-6 (CV),TWIST COLLAR PUSH PIN SET COMPLETE SAFETY SHIELD CROSS BEARING SERIES 8 NOTE: Part No. 00754009 is no longer available as an assembly. Replace with PN 00760452. Parts will not interchange between assemblies; Triangle shaft and tube. This driveline has yellow shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 35 DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 10001 - 11270 APR 1998 - SEPT 1990 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 24 25 26 PART NO. QTY. DESCRIPTION 00760452 7431 8482 8382 7432 7433 8384 00760632 00760634 8489 00760636 8486 8393 00760640 00760641 7420 8949 8949 00759217 0921000345 00756005 00756004 8974 8391 00759556 00760668 00760667 1 1 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 DRIVELINE,540 CV CAT 5 1-3/8-6 YOKE SLIDE COLLAR DOUBLE YOKE FITTING,GREASE M8 X 1 YOKE-INBOARD CROSS & BEARING KIT SPRING PIN 10MM X 90MM PROFILE-INNER SAGA PROFILE & SLEEVE W.A. INBOARD YOKE YOKE 1-3/4-20 SPLINE A.S. CROSS & BEARING KIT BEARING RING TUBE, OUTER SHIELD OVL TUBE,INNER SHIELD ROUND ASSY-BEARING & CV CONE SHIELD CONE SHIELD CONE SCREW 1/2 LG END CHAIN, SAFETY DECAL-ROTATING DRIVELINE DECAL-SHIELD MISSING SUPPORT BEARING Q.D. COLLAR KIT KIT, SLIDE COLLAR DRIVELINE TRACTOR HALF PART OF DRIVELINE IMPLEMENT HALF PART NOTE: This is a replacement D/L, NOT used on Production Model. Parts WILL NOT interchange with earlier D/L; Star Shaped Shaft & Tube. This driveline has black shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 36 DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 11001 - 11270 APR 1990 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 00759243 00759244 00759233 00759234 00759234 00759236 00759237 1442 00759238 W827A W840 00759239 00759240 00759241 4571 00760452 00760452 02961453 1 1 2 1 1 1 4 1 1 1 1 1 3 1 1 1 2 CV DRIVELINE,540 1-3/8-6 YOKE SC QD YOKE 540 RPM BODY, ASY KIT, CROSS & BEARING KIT, CROSS & BEARING SHIELD, BELL TUBE-SHIELD BEARING, NYLON OUTER SHIELD BRG-NYLON YOKE,CLP,1-3/4-20SP PAINT BLK CROSS REPR KIT YOKE & SHAFT SHIELD-INNER SHIELD BRG SLIDE COLLAR KIT DRIVELINE,540 CV CAT 5 1-3/8-6 DRIVELINE,540 CV CAT 5 1-3/8-6 GREASE FITTING 1/4-28 TAPER 45 NOTE: Part No. 00759243 no longer available as an assembly. Replace with PN 00760452 assembly. Parts will not interchange between assembly; Splined shaft and tube. This driveline has black shields. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 37 GEARBOX ASSEMBLY - 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 38 GEARBOX ASSEMBLY - 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 21 22 23 24 25 27 29 30 31 32 00756741 00755613 00756900 00755615 00753238 00755617 00755618 00755619 00755620 00756943 00755622 00755626 00755627 00769938 00756945 00756899 00756946 00755632 00755633 00755634 00755635 00757342 00755637 02880900 00037200 00755624 00755623 163016 1 1 2 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 1 4 1 1 6 6 1 1 1 GEARBOX, 00756740 WITH LUBE CASING PINION 20 TEETH 1.2:1 BEARING OIL SEAL SHAFT INTERNAL CIRCLIP SHIM EXTERNAL CIRCLIP NUT M40X1.5 SHIM PROTECTIVE SHIELD OIL SEAL BEARING, 30210 SHAFT GEAR 24 TEETH 1.2:1 PIN, COTTER 3/16 X 2-3/8 SHIM PLUG,3/8 CAP HEXB METRIC 8-P1.25-16MM 5 PLUG, PRESSURIZED VENT COVER HHCS 3/4-10UNC 2-3/4 PL5 NUT TOPLOCK 3/4 NC PLC NUT WASHER 2.200 OD1.218 1DX.250 PIN, COTTER 3/16 X 2 NOTE: Right Wing CCW Rotation Blades. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 39 GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 40 GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 00755598 00755613 00755614 00755615 00753238 00755617 00755618 00755619 00755620 00755621 00755622 00755626 00755627 00769938 00755629 00755630 00755631 00755632 00755633 00755634 00755635 00757342 00755637 00755638 02880900 00037200 00755624 00755623 163016 1 1 2 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 1 4 1 1 1 6 6 1 1 1 GRBX ASSY RH C/W-IN-C/CW OUT CASING GEAR, 24 TEETH 1:1.5 BEARING OIL SEAL SHAFT INTERNAL CIRCLIP SHIM EXTERNAL CIRCLIP NUT,SLOTTED CASTLE SHIM PROTECTIVE SHIELD OIL SEAL BEARING, 30210 SHAFT PINION, 16 TEETH 1:1.5 PIN, COTTER SHIM PLUG,3/8 CAP HEXB METRIC 8-P1.25-16MM 5 PLUG, PRESSURIZED VENT COVER SHIM HHCS 3/4-10UNC 2-3/4 PL5 NUT TOPLOCK 3/4 NC PLC NUT WASHER 2.200 OD1.218 1DX.250 PIN, COTTER 3/16 X 2 NOTE: Left Wing CW Blade Rotation. Center Section CCW Blade Rotation. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 41 GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 42 GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 00755566 00755613 00755614 00755615 00753238 00755617 00755618 00755619 00755620 00755621 00755622 00755626 00755627 00769938 00755629 00755630 00755631 00755632 00755633 00755634 00755635 00757342 00755637 00755638 02880900 00037200 00755624 00755623 163016 1 1 2 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 1 4 1 1 1 6 6 1 1 1 GRBX ASSY C/W-IN-C/W OUT CASING GEAR, 24 TEETH 1:1.5 BEARING OIL SEAL SHAFT INTERNAL CIRCLIP SHIM EXTERNAL CIRCLIP NUT,SLOTTED CASTLE SHIM PROTECTIVE SHIELD OIL SEAL BEARING, 30210 SHAFT PINION, 16 TEETH 1:1.5 PIN, COTTER SHIM PLUG,3/8 CAP HEXB METRIC 8-P1.25-16MM 5 PLUG, PRESSURIZED VENT COVER SHIM HHCS 3/4-10UNC 2-3/4 PL5 NUT TOPLOCK 3/4 NC PLC NUT WASHER 2.200 OD1.218 1DX.250 PIN, COTTER 3/16 X 2 NOTE: Right Wing CCW Rotation Blades. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 43 GEARBOX ASSEMBLY - CENTER SECTION 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 44 GEARBOX ASSEMBLY - CENTER SECTION 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 21 22 23 24 25 27 29 30 31 32 00756622 00755613 00756900 00755615 00753238 00755617 00755618 00755619 00755620 00756943 00755622 00755626 00755627 00769938 00756945 00756899 00756946 00755632 00755633 00755634 00755635 00757342 00755637 02880900 00037200 00755624 00755623 163016 1 1 2 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 1 4 1 1 6 6 1 1 1 GEARBOX CASING PINION 20 TEETH 1.2:1 BEARING OIL SEAL SHAFT INTERNAL CIRCLIP SHIM EXTERNAL CIRCLIP NUT M40X1.5 SHIM PROTECTIVE SHIELD OIL SEAL BEARING, 30210 SHAFT GEAR 24 TEETH 1.2:1 PIN, COTTER 3/16 X 2-3/8 SHIM PLUG,3/8 CAP HEXB METRIC 8-P1.25-16MM 5 PLUG, PRESSURIZED VENT COVER HHCS 3/4-10UNC 2-3/4 PL5 NUT TOPLOCK 3/4 NC PLC NUT WASHER 2.200 OD1.218 1DX.250 PIN, COTTER 3/16 X 2 NOTE: Center Section CCW Blade Rotation. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 45 GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 10001 - 11100 APR 1988 - MAR 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 46 GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 10001 - 11100 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 00755698 00756643 00756649 00753223 00753224 00756644 00753226 00756645 00755746 00755068 00753230 00753231 00753232 00756648 00755745 00753235 00755070 00753237 00753238 00753239 00753240 00753241 00755069 00756647 00756646 02845500 00010300 00010400 00001400 2 2 2 2 2 2 2 2 1 4 6 1 1 1 2 1 2 2 1 1 1 1 2 2 4 4 4 4 DIVIDER GEARBOX SHAFT, 1-3/4-20 SPL WG OUTPUT SNAP RING 40 UNI7436 .096 THK BEARING CIRCLIP, INTERNAL SEAL,OIL 45X80X10 PLUG SHIM, 69X79.9 GEAR, SIDE BEVEL 1000 T25A G/B SHOULDER RING HEXB METRIC 8-P1.25- 30MM PL5 SCHNORR WASHER CASING SHAFT, 1-3/4-20 CTR SHAFT GEAR, CTR BEVEL, 1000 T25A G/B SHIM BEARING INTERNAL CIRCLIP OIL SEAL OIL FILLER PLUG COVER BEARING GASKET SHIM, 65.3X79.7 BEARING, BALL HEXB 5/8 NC 2 PL5 LOCKWASHER 5/8 PL STD NUT 5/8 NC HEX PL FLATWASHER 5/8 PL STD SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 47 GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 48 GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 9 10 11 12 13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 00757826 00758644 00758669 00758646 00758647 00758648 00758649 00769938 00758651 00758652 00758653 00758654 00758655 00758670 00758657 00758658 00758659 00755954 00565000 00758660 00758646 00758647 00758648 00758664 00758665 00758667 00758667 00758668 1 2 AR AR AR 2 4 2 2 4 1 2 1 1 1 2 18 18 1 2 1 1 1 1 2 1 1 GEARBOX 540 DIVIDER 1:1.15 HOUSING,DIVIDER GEARBOX GEAR,20 TOOTH SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SHIM ,ADJUSTMENT O.5 CAP,HORIZONTAL HUB BEARING,TIMKEN 30210 NUT,M55X1.5 ADJUSTING ADAPTER, SEAL SEAL, INPUT SHAFT PLUG,1/2 PRESSURIZED VENT BEARING,INPUT SHAFT GEAR,23 TOOTH SPACER,INPUT SHAFT SHAFT,HORIZONTAL OUTPUT HHCS, M10X1.5X32 LOCKWASHER M10 PLUG, HEX HEAD PIPE 1/8-27NPT RING,RETAINING SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SHIM ,ADJUSTMENT O.5 CAP,INPUT SHAFT,INPUT SHIM .012 SHIM .012 SHIM,0.020 NOTE: 00757826 not serviced as complete unit, use 00759116 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 49 GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 10001 - 11100 APR 1988 - MAR 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 50 GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 10001 - 11100 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 00756604 00756643 00756649 00753223 00753224 00756644 00753226 00753227 00753228 00755068 00753230 00753231 00753232 00756648 00753234 00753235 00755070 00753237 00753238 00753239 00753240 00753241 00755069 00756647 00756646 02845500 00010300 00010400 00001400 2 2 2 2 2 2 2 2 1 4 6 1 1 1 2 1 2 2 1 1 1 1 2 2 4 4 4 4 DIVIDER GEARBOX, COMER W/1-3/4 SHAFT, 1-3/4-20 SPL WG OUTPUT SNAP RING 40 UNI7436 .096 THK BEARING CIRCLIP, INTERNAL SEAL,OIL 45X80X10 PLUG TAKE-UP RING BEVEL PINION SHOULDER RING HEXB METRIC 8-P1.25- 30MM PL5 SCHNORR WASHER CASING SHAFT, 1-3/4-20 CTR SHAFT CROWNWHEEL SHIM BEARING INTERNAL CIRCLIP OIL SEAL OIL FILLER PLUG COVER BEARING GASKET SHIM, 65.3X79.7 BEARING, BALL HEXB 5/8 NC 2 PL5 LOCKWASHER 5/8 PL STD NUT 5/8 NC HEX PL FLATWASHER 5/8 PL STD SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 51 GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 52 GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 9 10 11 12 13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 00757825 00758644 00758645 00758646 00758647 00758648 00758649 00769938 00758651 00758652 00758653 00758654 00758655 00758656 00758657 00758658 00758659 00755954 00565000 00758660 00758646 00758647 00758648 00758664 00758665 00758667 00758667 00758668 1 2 AR AR AR 2 4 2 2 4 1 2 1 1 1 2 18 18 1 2 1 1 1 1 2 1 1 GEARBOX 540 DIVIDER 1:1.15 HOUSING,DIVIDER GEARBOX GEAR,20 TOOTH SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SHIM ,ADJUSTMENT O.5 CAP,HORIZONTAL HUB BEARING,TIMKEN 30210 NUT,M55X1.5 ADJUSTING ADAPTER, SEAL SEAL, INPUT SHAFT PLUG,1/2 PRESSURIZED VENT BEARING,INPUT SHAFT GEAR,23 TOOTH SPACER,INPUT SHAFT SHAFT,HORIZONTAL OUTPUT HHCS, M10X1.5X32 LOCKWASHER M10 PLUG, HEX HEAD PIPE 1/8-27NPT RING,RETAINING SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SHIM ,ADJUSTMENT O.5 CAP,INPUT SHAFT,INPUT SHIM .012 SHIM .012 SHIM,0.020 NOTE: 00757825 not serviced as complete unit, use 00769115 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 53 GEARBOX ASSEMBLY - LEFT WING 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 54 GEARBOX ASSEMBLY - LEFT WING 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 21 22 23 24 25 27 29 30 31 32 00756739 00755613 00756899 00755615 00753238 00755617 00755618 00755619 00755620 00756943 00755622 00755626 00755627 00769938 00756945 00756900 00756946 00755632 00755633 00755634 00755635 00757342 00755637 02880900 00037200 00755624 00755623 163016 1 1 2 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 1 4 1 1 6 6 1 1 1 GEARBOX CASING GEAR 24 TEETH 1.2:1 BEARING OIL SEAL SHAFT INTERNAL CIRCLIP SHIM EXTERNAL CIRCLIP NUT M40X1.5 SHIM PROTECTIVE SHIELD OIL SEAL BEARING, 30210 SHAFT PINION 20 TEETH 1.2:1 PIN, COTTER 3/16 X 2-3/8 SHIM PLUG,3/8 CAP HEXB METRIC 8-P1.25-16MM 5 PLUG, PRESSURIZED VENT COVER HHCS 3/4-10UNC 2-3/4 PL5 NUT TOPLOCK 3/4 NC PLC NUT WASHER 2.200 OD1.218 1DX.250 PIN, COTTER 3/16 X 2 NOTE: Left Wing CW Blade Rotation. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 55 HOSE BRACKET ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 0651140100 0651150100 7A101112 5B10110 131000 1 1 2 2 2 WLDMT, HYD. HOSE BRKT HYD. HOSE BRKT. BLT 5/8 X 1-1/2 NUT 5/8 HEX, ZP LOCK WASHER SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 56 HYDRAULIC VALVE ASSEMBLY - CLOSED CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 15 38 40 49 6514042 6514041 6514045 6514044 1 1 1 1 PLUG, CLOSED CTR SEAL SEAL ORING 1X1-1/8X0.070 WASHER BACKUP 1-1/8X1X1/16TK Standard on Closed Valve SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 57 HYDRAULIC VALVE ASSEMBLY - CONVERSION PLUG SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 16 37 6514039 6514041 1 1 PLUG SEAL Standard on Open Valve SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 58 HYDRAULIC VALVE ASSEMBLY - DETENT W/SPRING ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 18 19 20 21 22 23 24 25 26 27 28 29 30 6514016 6514017 6514018 6514019 6514020 6514021 7E42012 6514022 7D42014 6514023 6514024 6514025 65140A54 1 1 1 1 1 1 1 1 4 1 1 1 1 HOUSING DETENT SLEEVE WASHER SPRING CENTERING (25#) COLLAR STEP WASHER C/S1/4 X 1 1/2 SK HD CAP,END BOLT BALL 1/4 STEEL SPRING PLUG WASHER Standard quantities for one Detent Assembly 3 required per hydraulic valve. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 59 HYDRAULIC VALVE ASSEMBLY - NON-ADJUSTABLE RELIEF SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 14 31 32 33 65140A50 6514034 6514035 6514036 1 1 1 1 RELEIF VALVE O-RING WASHER SEAL Standard on Open Center Valve SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 60 HYDRAULIC VALVE ASSEMBLY - NON-ADJUSTABLE RELIEF SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 17 34 35 36 6514037 6514034 3514035 6514036 1 1 1 1 PLUG, NO-RELIEF ASSY CROSS O-RING N/A SEAL Standard on Closed Center Valve SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 61 HYDRAULIC VALVE ASSEMBLY - OPEN/CLOSED CENTER VALVE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19E13/41/2 65140A47 65140A48 7E4204 65140A46 6514012 6514013 6514026 6514027 6514028 6514029 6514030 6514031 65140A50 6514042 6514039 6514037 2 3 3 6 3 6 6 3 3 3 3 3 3 1 1 1 1 PIPE BUSHING HANDLE KIT-PIN SHCS 1/4 NC 1/2 BRKT PLATE RETAINER SEAL, O-RING POPPET SPRING,LIFT CHECK SEAL, O-RING PLUG PLATE,1/16 ORIFICE RETAINER NON -ADJUSTABLE RELIEF ASSEMBLY (OPEN CENTER ONLY) CLOSED CENTER ASSEMBLY (CLOSED CENTER ONLY) CONVERSION PLUG ASSEMBLY NO-RELIEF ASSEMBLY (CLOSED CENTER ONLY) SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 62 JACK ASSEMBLY - TOP WIND SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 00756655 00749892 00751685 1 1 1 PARKING JACK 5000# CAPACITY PIN-JACK RETAINING PIN-CLIP HAIR SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 63 LEVEL ROD ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 584042 00756926 00770485A 651102 5C1490 163012 15B1200 2 2 2 4 2 8 8 WLDMT-ROD CONTROL WLDMT,CTR SEC CONTROL ROD NUT,EXTENDED ADJUSTMENT PIN-DRILLED HEXNUT 7/8 JAM ZP PINS-CTR 3/16 X 1 1/2 WASHER 3/4 P SAE 2 Assy Per Unit Reg. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 64 LIFT SCREW SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 0656510000 651062F 00609200 02030300 00756579 1 2 2 2 1 MANUAL-LIFT SCREW FITTING,GREASE (DRIVE TYPE) HEXB 1 NC 4 GR5 NUT TOPLOCK 1 NC PLB TOP LINK THREAD LOCK Outboard Axle - 2 Req’d SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 65 MAINFRAME COMPONENTS S/N 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 00756720 00756719 00756718 65109 7A51812 5JRC5180 5710121 5F5180 0656270000 0656261000 1 1 1 1 2 2 3 6 2 2 WLDMT, CENTER SECTION WLDMT, LEFT WING WLDMT, RIGHT WING PIN HINGE HHCS 5/16X1-1/2 ZP NUT TOPLOCK 5/16 COVER PLATE NUT 5/16 NC WING T,SPACER,LONG SPACER,SHORT HINGE 6 7 8 9 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 66 SAFETY SHIELD ASSEMBLY SN 10001 - 11100 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 0656130100 00757573 00757742 00004000 00751693 10182000 00011700 00011100 00015800 00024100 00017000 1 1 1 1 4 2 4 4 2 1 1 SHIELD, PRIMARY GEARBOX ** SHIELD - GBX WLDMT, BRKT-GB SHIELD NUT, 1/4-20NC PL WINGNUT HEXB METRIC 8-P1.25- 16MM PL5 HHCS 3/8-16 LOCKWASHER 5/16 PL STD FLATWASHER 3/8 PL STD NUT,TOPLOCK 3/8NC PLB FLATWASHER STD 1/4 PL LOCKWASHER 1/4 PL STD * Use existing G/B Bolts ** Used with G/B PN 00756604 & PN 00755698 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 67 SAFETY SHIELD ASSEMBLY SN 11101 - 11270 MAR 1990 - OCT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 00759781 00757573 00757742 00004000 00751693 10182000 00011700 00011100 00015800 00024100 00017000 00750959 00001300 1 SHIELD, PRIMARY GB SHIELD - GBX + WLDMT, BRKT-GB SHIELD + NUT, 1/4-20NC PL WINGNUT + HEXB METRIC 8-P1.25- 16MM PL5 + HHCS 3/8-16 + LOCKWASHER 5/16 PL STD + FLATWASHER 3/8 PL STD + NUT,TOPLOCK 3/8NC PLB + FLATWASHER STD 1/4 PL + LOCKWASHER 1/4 PL STD HEXB,1/2NC X 1,ZP,GRD5 LOCKWASHER 1/2 PL STD 1 1 1 + Three (3) Required per unit. * NOTE: Used with G/B PN 00757825 & PN 00757826 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 68 SKID SHOE & SIDE SKIRT - OFFSET MODELS SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 00757071 00757066 00757069 2A381312 00001200 00001300 63066100 00748823 03101646 00013901 00011100 00757072 1 1 3 7 7 4 4 4 4 4 1 SKIRT LH CTR SC FOR 10 FT. L/H CENTER SECTION SKIRT SLIDE SHOE BAR BOLT,PLOW 1/2 NC X 1-1/2 GR.5 NUT,HEX 1/2 NC PL LOCKWASHER 1/2 PL STD HHCS 3/8NCX1-1/2 HHCS 1/2-13UNC 1-1/2 PL5 LOCKWASHER,3/8,MEDIUM-ZP NUT HEX 3/8 NC PL FLATWASHER 3/8 PL STD REAR CONNECTOR SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 69 SKID SHOE - CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 00751305 00749171 02716500 2 4 4 WLDMT,SKID SHOE CS 15 HHCS 1/2-20UNF 1-1/4 PL5 NUT TOPLOCK 1/2 NF PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 70 SKID SHOE & SIDE SKIRT ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756881 00756879 65203R 65203L 00002700 00001200 00748823 00001300 2A381312 00013300 1 1 1 1 14 20 10 20 6 4 RIGHT WING SIDE SKIRT WLDMT LEFT WING SIDE SKIRT WLDMT SHOES SLIDE SHOES SLIDE FLATWASHER 1/2 PL STD NUT,HEX 1/2 NC PL HHCS 1/2-13UNC 1-1/2 PL5 LOCKWASHER 1/2 PL STD BOLT,PLOW 1/2 NC X 1-1/2 GR.5 HEXB 1/2 NC 2 PL5 2 3 4 5 6 7 8 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 71 SLIP CLUTCH ASSEMBLY - SERIES 6 SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 00756075 00754199 00754203 00754201 00754202 00755599 00755600 00754314 00754301 00754302 00754303 00754304 8 1 1 4 1 2 1 1 1 8 1 CLUTCH & YOKE SERIES 6 BOLT & NUT M10X95 SELF LK NUT PRESSURE PLATE INNER PLATE RING,CLUTCH LINING BODY-FRICTION CLUTCH NUT & BOLT 14X70MM PLATE WITH HOLES BUSHING YOKE, FLANGED SPRING CLUTCH DIRT SHIELD SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 72 SLIP CLUTCH ASSEMBLY - SERIES 8 SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 00756173 00754199 00754203 00754201 00754202 00755599 00755600 00754314 00754301 00754083 00754303 00754304 8 1 1 4 1 2 1 1 1 8 1 CLUTCH & YOKE SERIES 8 BOLT & NUT M10X95 SELF LK NUT PRESSURE PLATE INNER PLATE RING,CLUTCH LINING BODY-FRICTION CLUTCH NUT & BOLT 14X70MM PLATE WITH HOLES BUSHING YOKE, CLUTCH SERIES 8 SPRING CLUTCH DIRT SHIELD SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 73 SPRING POD ASSEMBLY - CENTER AXLE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 0656460100 0656460110 0656460120 5JRC12100 371063A 65107A4 00002701 02023800 37107B13 0656460240 1 1 4 4 4 4 4 2 2 CENTER SPRING ASSY UPPER SPRING WLD LOWER SPRING WLD NUT TOPLOCK 3/4 SPRING GUIDE SPRING FLATWASHER,3/4,TYPE AW,ZP HEXB 3/4 NC 6-1/2PL CLIP-X HAIR PIN WLDMT-PIN SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 74 SPRING POD ASSEMBLY - OUTBOARD AXLE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00756999 00756907 163016 00756998 371063A 1 2 1 1 SPRING ASSY OUTBOARD AXLE WLDMT, ROCKER ARM PIN, COTTER 3/16 X 2 PIN-ROCKER ARM SPRING SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 75 TIRE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 00008700 00025200 1 1 WHEEL, RIM ONLY NOTAT TIRE & WHEEL NOTE: 4 or 6 assemblies are needed, depending upon Axle requirement. ALSO AVAILABLE Recapped Airplane Tire on 5x12 rim - PN 00750016 (Not Shown) Used 14" Airplane Tire and Wheel - PN 00749700 (Not Shown) SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 76 TONGUE ASSEMBLY USED ON 44R DRIVELINE SN 10527 - 11270 MAR 1989 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 6 7 8 9 10 11 651051 0811050020 651053 651054 7AH5121620 7AH5121636 5JRC12160 163016 D102 999201 1 1 1 2 2 1 3 2 1 1 WLDMT, TONGUE WLDMT-TONGUE HITCH ROD HITCH CONTROL PIN-TONGUE PIVOT C/S 3/4 X 2 1/2 NF 5 C/S 3/4 X 4 1/2 NF 5 NUT TOPLOCK 3/4 NF PLC PIN, COTTER 3/16 X 2 DECAL PTO SFT TO HTCH NO LONGER AVAILABLE SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 77 TONGUE ASSEMBLY USED ON C.V. DRIVELINE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 00756667 0811050020 00755841 651054 7AH5121620 7AH5121636 5JRC12160 163016 D102 999201 00758643 00755840 00770485A 5C1490 131400 1 1 1 2 1 3 2 1 1 1 1 1 1 1 1 WLDMT, TONGUE WLDMT-TONGUE HITCH TONGUE HITCH CONTROL ROD ASSY PIN-TONGUE PIVOT C/S 3/4 X 2 1/2 NF 5 * C/S 3/4 X 4 1/2 NF 5 NUT TOPLOCK 3/4 NF PLC PIN, COTTER 3/16 X 2 DECAL PTO SFT TO HTCH NO LONGER AVAILABLE ROD,CONTROL * WLDMT, CONTROL ROD * NUT,EXTENDED ADJUSTMENT * HEXNUT 7/8 JAM ZP * LOCKWASHER 7/8 * Parts included in 00755841, Control Rod Assembly. SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 78 WEIGHT BOX SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 0656390100 0656390300 12BF6168 00012101 00757359 7A121016 00003901 00000200 15B1200 20A4012E 1 1 6 6 1 1 1 1 1 1 WEIGHT BOX WELD COVER SCREW 3/8 X 1 NC LOCKWASHER 3/8 PL HVY BRACE STRAP C/S 3/4 X 2 NC ZP LOCKWASHER 3/4 PL HEAVY NUT 3/4 NC HEX PL WASHER 3/4 P SAE PIN SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 79 WHEEL HUB ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. QTY. DESCRIPTION 00757241 00756576 00750434 00756577 00752177 00750614 00756490 02957044 00756493 00756492 00026200 00003500 00756489 0371242102 00756001 00756489 00756528 00756002 1 1 1 5 5 1 1 1 1 1 1 1 1 REF REF REF REF WHEEL HUB BEARING CUP OUTSIDE BEARING CONE INSIDE BEARING CUP INSIDE BOLT, STUD 1/2-20 NF X 1-7/8 NUT 1/2-20NF 90DEG.CONE LUG PL NUT SLOTTED THIN 1 NF PLC OIL SEAL HEAVY DUTY - TK-15 WASHER DUST CAP PIN-COTTER 5/32 X 1-1/2 ZERK FITTING 1/8 STRAIGHT HUB W/ CUPS & STUBS BEARING CONE SPINDLE HUB W/ CUPS & STUBS WHEEL HUB ACCESS. KIT (INCLUDES 3-5 & 7-12) SPINDLE DUAL WHEEL SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 80 WINCH & HOLD DOWN STRAP SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 0656200100 7A6168 7A81312 15B600 00012101 13800 00013901 00001200 B651202 651202 651203 65111 37107B13 1 3 2 1 3 2 3 2 1 1 1 2 4 STAND WINCH FS15 C/S3/8 X 1 NC C/S1/2 X 1 1/2 NC WASHER 3/8 SAE P LOCKWASHER 3/8 PL HVY LOCK WASHER NUT HEX 3/8 NC PL NUT,HEX 1/2 NC PL WINCH & CABLE WINCH CABLE, 1/4 AIRCRAFT W/THIMBLE BAR, TRANSPORT CLIP-X HAIR PIN 10 11 12 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 81 SERVIS-RHINO LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01.Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in material or workmanship. 1.02.Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be defective under normal use and service due to defects in material or workmanship. 1.03.This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use, negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found in your Operator’s Manual. 1.04.Except as provided herein, no employee, agent, Dealer, or other person is authorized to give any warranties of any nature on behalf of Manufacturer. 2. REMEDIES AND PROCEDURES. 2.01.This limited warranty is not effective unless the Purchaser returns the Registration and Warranty Form to Manufacturer within 30 days of purchase. 2.02.Purchaser claims must be made in writing to the Authorized Dealer (“Dealer”) from whom Purchaser purchased the goods or an approved Authorized Dealer (“Dealer”) within 30 days after Purchaser learns of the facts on which the claim is based. 2.03.Purchaser is responsible for returning the goods in question to the Dealer. 2.04.If after examining the goods and/or parts in question, Manufacturer finds them to be defective under normal use and service due to defects in material or workmanship, Manufacturer will: (a) Repair or replace the defective goods or part(s) or (b) Reimburse Purchaser for the cost of the part(s) and reasonable labor charges (as determined by Manufacturer) if Purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty by Manufacturer. The choice of remedy shall belong to Manufacturer. 2.05.Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by Manufacturer and for returning the goods to the Dealer, whether or not the claim is approved. Purchaser is responsible for the transportation cost for the goods or part(s) from the Dealer to the designated factory. 3. LIMITATION OF LIABILITY. 3.01.MANUFACTURER DISCLAIMS ANY EXPRESS (EXCEPT AS SET FORTH HEREIN) AND IMPLIED WARRANTIES WITH RESPECT TO THE GOODS INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 3.02.MANUFACTURER MAKES NO WARRANTY AS TO THE DESIGN, CAPABILITY, CAPACITY, OR SUITABILITY FOR USE OF THE GOODS. 3.03.EXCEPT AS PROVIDED HEREIN, MANUFACTURER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO PURCHASER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS, OR DAMAGE CAUSED OR ALLEGED TO BE CAUSED DIRECTLY OR INDIRECTLY BY THE GOODS INCLUDING, BUT NOT LIMITED TO, ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES RESULTING FROM THE USE OR OPERATION OF THE GOODS OR ANY BREACH OF THIS WARRANTY. NOT WITHSTANDING THE ABOVE LIMITATIONS AND WARRANTIES, MANUFACTURER’S LIABILITY HEREUNDER FOR DAMAGES INCURRED BY PURCHASER OR OTHERS SHALL NOT EXCEED THE PRICE OF THE GOODS. 3.04.NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS WARRANTY OR TRANSACTIONS UNDER THIS WARRANTY MAY BE BROUGHT MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION HAS OCCURRED. 4. MISCELLANEOUS. 4.01.Proper Venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe County, Texas. 4.02.Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall be deemed to be a waiver of any other term. 4.03.If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the invalidity of such provision shall not invalidate any other provisions herein. 4.04.Applicable law may provide rights and benefits to purchaser in addition to those provided herein. KEEP FOR YOUR RECORDS ATTENTION: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine identification when applying for warranty. Servis-Rhino Implement Model _______________________________ Serial Number ________________________________ Date Purchased __________________________________________ Dealer ______________________________________ ATTENTION: READ YOUR OPERATOR'S MANUAL RHINO® 1020 S. Sangamon Ave. Gibson City, IL 60936 800-446-5158 Email: parts@servis-rhino.com TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety requirements of tractor operators: REQUIRED OF THE OWNER: 1. 2. 3. 4. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and Ensure that each employee uses such Seatbelt while the tractor is moving; and Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected area provided by the ROPS. REQUIRED OF THE OPERATOR 1. 2. 3. 4. 5. 6. 7. 8. 9. Securely fasten seatbelt if the tractor has a ROPS. Where possible, avoid operating the tractor near ditches, embankments, and holes. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces. Stay off slopes too steep for safe operation. Watch where you are going - especially at row ends, on roads, and around trees. Do not permit others to ride. Operate the tractor smoothly - no jerky turns, starts, or stops. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer. When the tractor is stopped, set brakes securely and use park lock, if available. Keep children away from danger all day, every day... Equip tractors with rollover protection (ROPS) and keep all machinery guards in place... Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens. SR15/SR10 PL 06-05 Printed U.S.A. P/N 00764578MB
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 88 Page Mode : UseOutlines Page Layout : SinglePage XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:bcb10e49-ac95-49e9-9a49-082e97b1debc Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2006:04:21 09:39:05-05:00 Creator Tool : PageMaker 6.5 Modify Date : 2006:04:21 14:22:52-05:00 Metadata Date : 2006:04:21 14:22:52-05:00 Document ID : uuid:6c74331a-9d63-4366-9703-5cccd0f7df85 Format : application/pdf Title : SR15, SR10 MASTER PARTS BOOK COVER.p65 Creator : sftrinidad Author : sftrinidadEXIF Metadata provided by EXIF.tools