Sharp DMR0134 Household Microwave Oven User Manual

Sharp Corporation Household Microwave Oven

Contents

Microwave oven operation manual

********** INFORMATION FOR CERTIFICATION (1) ********** APPLICANT: Name : Sharp Corporation, Reliability Control Group Address 22-22 Nagaike-Cho, Abeno-Ku Osaka 545-8522, Japan Grantee Code: : APY Applicant Rep. : S. Miyasaka CONTACT PERSON: Name : Sharp Electronics Corporation Address : Sharp Plaza, Mahwah, New Jersey 07430 Applicant Rep. : Steve Petruska, Product Safety Dept. Telephone No. : 201-529-9299 MEASUREMENT SITE: Name : Sharp Corporation, Kitchen Appliance Systems Div. EMI Anechoic Chamber Address : 3-1-72 Kitakamei-cho, Yao Osaka 581-8585, Japan MANUFACTURER: Name : Sharp Appliances (Thailand) Ltd. Address : 64 Moo 5, Tambol Bangsamuk Amphur Bangpakong Chachoengsao Province, Thailand FCC IDENTIFICATION : APYDMR0134 EQUIPMENT Model Name : Microwave Oven Model R-360E# and R-370E# (#: Suffix letter denoting cosmetic color is provided.) Brand : Sharp Electronics Corp. Importer : Sharp Electronics Corp. -----------------------------------------------------------------------------------------------------------------------------------------
********** INFORMATION FOR CERTIFICATION (2) ********** (1) Type(s) of emission: Not Applicable (2) Frequency range: 2450 MHz (3) Range of operating power and description of means provided for variation of operating power: RF output power 1000 W (Average power output is controlled by ON/OFF switching cycles.) (4) Max. power rating as described in the applicable rules: 1000 W (5) The voltage and current to magnetron: Magnetron Cat. No. 2M253H(L) : 3.44 kV peak, 332 mA (rms) (6) Function of each electro tube, semiconductor or other active circuit device: Fixed Magnetron, Type 2M253H(L) as power generator (7) Complete circuit diagram: Attached (8) Instruction book: Attached (9) Tune up procedure over the power range or at specific operating power levels: Not adjustable (10) A description of all circuitry and devices provided for determining and stabilizing frequency: Fixed by magnetron and oven design (11) A description of any circuit or devices employed for suppression of spurious radiation, for limiting modulation, and for limiting the operating power: Suppression obtained by shielding design (12) Identification plate or label: Illustration attached Location of identification plate or label: Photo. Attached
********** INFORMATION FOR CERTIFICATION (3) ********** DESCRIPTION OF THE MICROWAVE OVEN Unit Body Dimensions : 428 mm wide, 339 mm high, 476 mm deep (include feet) Door Dimensions : 428 mm wide, 299 mm high (Viewing Area: 286 mm wide, 100 mm high) Oven Cavity Dimensions : 371 mm wide, 207 mm high, 419 mm deep (without tray) Feed Type and Location : Supplied by waveguide located side of oven Door Seal Type : Choke and Capacitive Seals Magnetron Type : 2M253H(L), mfd by Toshiba

Navigation menu