Sharp HRO00025 Cordless Telephone System User Manual

Sharp Corporation Cordless Telephone System Table

a href="https://usermanual.wiki/Sharp" itemprop="url"> Sharp >

Users Manual 2

Operating the Answering System473. Answering MachineErasing received messagesIt is important to erase received messages after you listen to them to ensure that the memory does not become full.♦Erasing all messages: To erase all messages, press , , and then . ♦Erasing a single message: To erase a single message, press while the message is being played.FUNCTIONDELETESTART/MEMORYDELETERecording memosYou can record memos for yourself and other users of the machine. These will be played back together with incoming messages when the key is pressed.PLAY1Press once and once.2Pick up the handset, press , and speak into the handset. 3When you have finished speaking, replace the handset or press .REC/MEMOSTART/MEMORYSTOPRecording phone conversations To record a phone conversation, hold down the key during the conversation you want to record. When you are finished, release the key. The conversation will be played back when the key is pressed.REC/MEMOPLAYall.bookPage47Wednesday,February13,200210:00AM
Optional Answering System Settings481Press once and once.2Press once and once.3Press .4Press a number from 1 to 4 to select the desired ICM recording time.5Press to return to the date and time display.15 seconds 60 seconds30 seconds 4 minutesFUNCTIONSTOPOptional Answering System SettingsSetting ICM timeIncoming messages (ICMs) are the messages which callers leave for you in the answering system. The answering system is set at the factory to allow each caller a maximum of 4 minutes to leave a message. If desired, you can change this setting to 15, 30, or 60 seconds.Display:T.A.D. SETTINGRECORDING TIME1234The display briefly shows your selection, then:REMOTE CODEFax reception on TAD failureIf the memory for recording incoming messages becomes full while you are out, the answering system will no longer be able to record messages. The ON TAD FAILURE setting is used to choose the response of the machine to incoming calls when this happens:♦ Automatic fax reception NO: The machine will answer after 20 rings, after which it will wait to receive a remote command. Most callers will hang up before it answers; however, when you call the machine from a remote location, you can wait until it answers, listen to your messages, and then erase them (see Remote Operations on page 55).all.bookPage48Wednesday,February13,200210:00AM
Download:
Mirror Download [FCC.gov]
Document ID236375
Application IDQQkwO9ccL2V2wLG8d/+XJQ==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize106.29kB (1328655 bits)
Date Submitted2002-04-11 00:00:00
Date Available2002-06-03 00:00:00
Creation Date2002-03-29 11:21:46
Producing SoftwareAcrobat PDFWriter 4.05 Windows
Document Lastmod2002-03-29 11:22:23
Document Titleæ©¡Table.PDF
Document Creatoræ©¡Microsoft Word
Document Author: æ©¡IKEZAWA
FCC ID Filing: APYHRO00025

Navigation menu