Sharp HRO00030 1900MHz GSM/GPRS Cellular Phone User Manual

Sharp Corporation 1900MHz GSM/GPRS Cellular Phone

USER MANUAL

Download: Sharp HRO00030 1900MHz GSM/GPRS Cellular Phone User Manual
Mirror Download [FCC.gov]Sharp HRO00030 1900MHz GSM/GPRS Cellular Phone User Manual
Document ID323099
Application IDzlthh7jbQ06GxYopu1HQyA==
Document DescriptionUSER MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize79.18kB (989751 bits)
Date Submitted2003-05-05 00:00:00
Date Available2003-05-05 00:00:00
Creation Date2003-04-18 10:14:02
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-04-18 10:14:02
Document TitleUSER MANUAL

Your Phone
Please check the following carefully. Your phone
should come complete with:
• GSM 900/1800/1900 GPRS phone
• Rechargeable Li-ion battery
• AC charger
• Hands free
• User guide
Accessories (option)
•
•
•
•
Li-ion spare battery (XN-1BT11)
Cigarette lighter charger (XN-1CL10)
Car holder (XN-1CH11)
Data cable (RS232C cable: XN-1DC10)
Some of the above accessories may not be offered by
region.
For details, please contact your dealer.
Your Phone
Getting Started
17
18
19
20
21
22
10
11
12
13
14
15
23
24
25
26
16
Getting Started
1. Earpiece
2. Navigation Keys (Arrow Keys):
Move the cursor to select
menu items, etc.
Up/Down arrow keys: Search the Phonebook
entries in stand-by mode.
Left arrow key:
Starts the Saved Picture in
stand-by mode.
Right arrow key:
Displays the Phonebook
menu or the list of Saved
Pictures in stand-by mode.
3. Centre Key:
Displays the Main Menu
and executes the functions.
in this manual indicates
this key.
4. Left Soft Key:
Executes the function at the
bottom left on the screen.
5. Send Key:
Makes or accepts calls,
views the call in stand-by
mode.
6. Voice Mail Key:
Used to connect to Voice
mail centre. (Depends on
the SIM card.)
Getting Started
7. * /Shift Key,
Finder Switch Key: Enters * or switch the text
mode.
Switches finders between
main display and external
display.
Press and hold this key to
switch input modes among
three modes: Abc, ABC,
abc and 123.
8. Main display
9. Hands free Connector
10. Right Soft Key:
Executes the function at the
bottom right on the screen.
11. “Vodafone live” Key:
Used to access the
“Vodafone live!” by
opening the browser.
12. End/Power Key:
Ends a call, turns power on/
off.
13. Keypad
14. #/Flash Light Key: Switches symbol screens.
Press and hold this key to
shift text input mode
between Normal and T9
mode.
Turns the flash on or off in
Camera mode.
15. Microphone
16. External Connector:Used to connect either the
charger or data cable.
17. Aerial
18. Flash light:
Used as a flash or an
auxiliary light in still
camera/movie camera
mode, for a battery charge
indicator, or notification for
incoming calls, data/fax
calls or text messages.
19. Camera
20. Macro Dial:
Turns the dial to normal
( ) or macro ( )
position.
21. External Display
22. Infrared Port:
Sends and receives data via
infrared.
23. Speaker
24. RF Connector
25. Side-Up/Side-Down Keys:
Move the cursor to select
menu items, adjust the
earpiece volume, etc.
26. Battery Cover
Getting Started
10
Inserting the SIM Card and the
Battery
2. Slide the SIM card into the SIM holder.
1. Slide off the battery cover.
SIM card
11
Getting Started
3. Hold the battery so that the metal contacts of the
battery are facing down, slide the guides on the top
of the battery into the battery slots
, and then
insert it
4. Replace the battery cover as shown below and slide
it as shown.
Note
• Make sure that only 3V SIM cards are used.
• Use only the approved battery (XN-1BT11).
Getting Started
12
Removing the SIM Card and the Battery
1. Make sure to turn off your phone and disconnect
charger and other accessories. Slide off the battery
cover.
2. Pick up the battery using the protruding edge and
remove the battery from the phone.
13
Getting Started
3. Slide the SIM card by pushing the back of the card
and remove it from the SIM holder.
Battery Disposal
The device is supported by a battery. In order to protect
the environment, please read the following points
concerning battery disposal:
• Take the used battery to your local waste depot,
dealer or customer service centre for recycling.
• Do not expose the used battery to an open flame, into
water or dispose with the household waste.
To Charge Using the Charger
1. Connect the charger to the external socket located at
the bottom of the phone with the charger’s “PUSH
TOP” mark facing towards you, and to an AC
outlet.
Flash light
Charging the Battery
You must charge the battery for at least 2 hours before
using your phone for the first time.
The flash light flashes red.
Standard charging time: Approx. 2 hours.
Getting Started
14
Note
• Charging time may be longer than above depending
on the state of a battery and a surrounding situation.
(See “Battery” on page 176.)
To disconnect the charger
Push and hold the side buttons of the charger, then
disconnect the charger from the external socket of the
phone.
2. When charging is complete, the flash light turns off.
Low Battery During Use
When the battery is running low, an alarm will sound
and the “
” will appear on the main display and the
external display.
If you are using your phone and you hear the “low
battery” alarm, attach your charger as soon as possible.
The phone may not be able to continue normal
operation if you continue to use it. The battery may only
last five minutes before the phone itself powers down
during a call.
Unplug the charger from the AC outlet, then unplug
the charger connector from the phone.
Note
• Do not use any non approved charger, this may
damage your phone and invalidate any warranty,
please see “Battery” on page 176 for details.
• When the phone is charging, the animated battery
status icon (
) will be displayed in the upper right
of the screen.
To Charge Using the Cigarette Lighter Charger
The cigarette lighter charger (option) supplies power
for charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right
hand side of the main display and the external display.
15
Getting Started
Charge Level
Indicators
Full level (greater than 60%)
Partial level (less than 60%)
Partial level (less than 30%)
Low level (less than 10%)
Empty
Charging the battery is
recommended.
Charge the battery.
Turning Your Phone On and Off
To turn the power on, press and hold F for
approximately 2 seconds.
The stand-by screen appears.
To turn the power off, press and hold F for
approximately 2 seconds.
Entering the PIN Code
If activated you will be asked to enter a PIN (Personal
Identification Number) code after turning on your
phone.
1. Enter your PIN code.
2. Press
2. Press
then press
3. Press
or
or
to select “Call Manager”,
to select “Phonebook”, then press
4. Press A [Options] to display Options Menu.
5. Press
or
to select “Copy All from SIM”,
then press
6. Press A [Yes] to start copying.
When the process is complete, you see the message,
“???”.
7. Press  to return to the stand-by mode.
Note
• If your PIN code is entered incorrectly three times in
a row, the SIM card is locked. See “Enabling/
Disabling the PIN Code” on page 142.
When you insert the SIM card to your phone for the first
time, you are asked whether you want to copy
phonebook entries on the SIM card. Follow the onscreen instructions, or you can do it later using the
Phonebook menu as follows:
1. Press
to display the Main menu.
Getting Started
16
Display Indicators (Main Display)
Status
Indicators
Left soft
key
1.
Indicates the strength of received
signal/the service is out of range.
2. 000:
Indicates the remaining shots.
3.
Appears when your phone is GPRS
enabled and within range.
Flashes during GPRS transmission.
4.
5.
/ :
Appears when the Java™ application
is executed/suspended.
6. (No display)/
/ :
Indicates the phone’s mode (Normal
mode/Meeting mode/Activity mode/
Car mode/Silent mode).
7.
Appears when the T9 text input mode
is activated.
: Appears when a new SMS, MMS
Alert or WAP Alert has arrived.
Right soft key
Centre key
8.
17
Getting Started
Indicates the input mode (Upper case
only the first letter of the word mode/
Upper case mode/Lower case mode/
Numeric mode).
9.
10.
11.
12.
Appears when “Diverts” (p. 167) is set
to “All Calls”.
21. :
Appears when viewing secured WAP
browser.
22.
Appears when in call.
Soft key Indicators
To execute the operation indicated, press each
corresponding key.
23. Area at the lower left of a screen:
Displays the operation executed by
left soft key.
Indicates the battery level.
13.
Appears when your phone is roaming
outside of your network.
14.
Appears when “Ringer Volume”
(p. 58) is set to “Silent”.
15.
Appears when Vibration alert is set.
16.
Appears when the data cable is
connected to your phone.
17.
Appears when your phone is in data
communication mode.
18.
Appears when a voicemail message is
stored.
19.
20.
Appears when up, down, right or left
navigation is available.
Appears when your phone is in fax
communication mode.
24. Area at the lower right of a screen:
Displays the operation executed by
right soft key.
25. Area at the centre of a screen:
Displays the operation executed by
centre key.
Appears when Alarm is set.
Appears when “Infrared” is on/during
connection.
Getting Started
18
Display Indicators (External Display)
5.
Status Indicators
Status
Indicators
1.
2.
3.
4.
19
Appears when in call.
6.
Indicates the battery level.
7.
Appears when your phone is roaming
outside of your network.
8.
Appears when “Diverts” (p. 167) is set
to “All Calls”.
9.
Appears when your phone is in data
communication mode.
Indicates the received signal strength.
Appears when GPRS is within range
and can be used.
Flashes during in GPRS
communication mode.
Appears when a new SMS, MMS
Alert or WAP Alert has arrived.
Appears when “Ringer Volume”
(p. 58) is set to “Silent”.
Getting Started
10.
Appears when Alarm is set.
11.
Appears when the data cable is
connected to your phone.
12.
Appears when viewing secured WAP
browser.
13.
Appears when “Infrared” is on/during
connection.
Getting Started
20
Call Functions
Making a Call
1. Enter the area code and the phone number you wish
to dial.
If you enter the wrong number, press C [Clear] to
delete the number to the left of the cursor.
2. Press D to dial.
Emergency Calls
1. Enter 112 (international emergency number) using
the keypad.
2. Press D to dial.
Note
• Emergency calls may not be available on all mobile
phone networks when certain network services and/
or phone features are in use. Contact your network
operator for more information.
• This Emergency number can normally be used to
make an emergency call in any country, with or
without a SIM card inserted, if a GSM network is
within range.
21
Call Functions
International Calls
1. Press and hold P until a “+” (international dialling
prefix) sign appears.
2. Enter the country code, followed by the area code
and the number.
3. Press D to dial.
Note
• Enter the area code omitting the first 0 when making
international calls, in most cases. (It differs for some
countries.)
Speed Dialling
Up to 9 phone numbers from the phonebook or SIM
memory can be assigned to speed dials. You can call the
numbers using the digit keys (H to O and Q).
For details on setting the Speed Dial List, see “Speed
Dial List” on page 43.
1. Press and hold any of the digit keys (H to O and
Q).
The phone number stored in the Speed Dial List is
displayed, then dialled.
Redialling
3. Press
You can redial the numbers in the call log list that you
may have missed, received or dialled. Each list can
contain up to 10 numbers.
1. Press D during stand-by.
2. Press
or
to select a category between
“Dialled Numbers”, “Missed Calls” and “Received
Calls”.
3. Press
or
to select the number you wish to
call.
4. Press D to redial the call.
or
to select “Call Settings”, then press
or
to select “Auto Redial”, then press
4. Press
5. Select “On” to enable the Auto Redial function or
“Off” to disable it, then press
Note
• When you receive an incoming call, the Auto Redial
function will be interrupted.
• Automatic redialling is not available for fax and data
calls.
Automatic Redialling
This setting allows you to automatically redial the
number if the first attempt was unsuccessful.
If you wish to stop redialling, press F or C [End].
Ending a Call
To Set the Auto Redial Function
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then
press
When an incoming call is detected, the phone rings and
the flash light flashes green.
1. Open your phone.
2. Press D to answer the call.
or
1. Press F to end the call.
Answering a Call
Call Functions
22
Press any key except F, C [Reject],
and
when the “Any Key Answer” function is enabled.
Set the Any Key Answer function in the profile in
each mode. (p. 63)
Tip
• When the hands free kit is connected to the phone,
you can answer calls by pressing the side-up or sidedown key.
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number will appear on
the screen. If the caller’s name and number are
stored in the Phonebook, the caller’s name will
appear on the screen.
• If the number is a restricted number, the display
shows “Withheld”.
• When receiving a call from the person whose picture
is registered in the Phonebook, receiving display and
the picture are displayed alternately.
23
Call Functions
Rejecting an Incoming Call
You can reject a call you do not wish to answer.
1. Press F or C [Reject] or press and hold the sideup or down key whilst the phone is ringing.
Incall Menus
Your phone has additional functions available whilst a
call is in progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume during a call.
1. During a call, press V or W.
Each press of
or
adjusts the earpiece volume
by one of 5 levels.
Putting a Call on Hold
This function allows you to manage two calls at the
same time. If you wish to make another call whilst you
are talking to someone, you can put the current call on
hold to call someone else.
To make another call during a call
1. During a call, press A [Options] to display the
Options Menu.
2. Select “Hold”, then press
The current call is put on hold.
To retrieve a call, press A [Options] and
select “Retrieve”, then press
3. Enter the phone number you wish to make another
call to, then press D.
Tip
• You can also make another call by entering the phone
number during a call instead of steps 1 and 2. The
current call is automatically put on hold.
• To end the current call, then talk again with the
person whose call is put on hold, press A[Options]
and select “End & Next”, then press
Call Waiting
This service notifies you of another incoming call
whilst you have a call in progress.
1. During a call, press A [Answer] to answer the
second call.
The first call is put on hold and you can now talk to
the second caller.
2. Press A [Options] and select “Swap” to switch
between the two calls.
3. Press A [Options] and select “End Call”,
then press
to end the current call and return to
the held call.
Note
• You need to set “Call Waiting” to “On” if you use
Call Waiting service (p. 130).
• Call Waiting service may not be available on all
networks. Contact your network operator for more
information.
• If you do not wish to answer the second call, press C
[Reject] in step 1. The call log of the second call will
be saved as a missed call.
Call Functions
24
Accessing SMS Menu During a Call
1. During a call, press A[Options] and select “SMS”,
then press
The following options are available: “Compose” to
make an SMS, or “Inbox”, “Sent”, “Draft”, or
“Outbox” to access these folders. For details on
SMS, see “SMS (Short Message Service)” on
page 108.
Conference Call
Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
Making a Conference Call
To make a conference call, you must have one active
call and one held call.
1. Press A [Options] to display the Options Menu.
2. Press
or
to select “Multiparty”, then press
3. Press
or
to select “Join All”, then press
to join the conference call.
4. Press F to end the conference call.
25
Call Functions
Note
• Conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step
3:
• To put all participants on hold, select “Hold All”
instead.
• To put all participants except the current call on
hold, select “Private” instead.
• To end the call with all participants, select “End
All” instead.
• To xxxxxxxxxx, select “Transfer” instead.
• To xxxxxxxxxx, select “Exclude” instead.
• To reject adding more participants to the current
party, select “Reject” instead, or you can send the
busy tone by selecting “I am busy”.
Adding New Participants to the Conference Call
1. Press A [Options] to display the Options Menu.
2. Press
or
to select “Dial”, then press
3. Enter the number you wish to include in the
conference call.
4. Press D to dial.
5. Press A [Options] to display the Options Menu.
6. Press
or
to select “Multiparty”, then press
7. Press
or
to select “Join All”, then press
to join the conference call.
If you wish to add other participants, repeat steps 1
to 7.
To End the Call with a Conference Call Participant
1. During a conference call, press
or
to select
the person who you wish to disconnect the call.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “End Call”, then press
To Have a Private Conversation with one of the
participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1. During the conference call, press
or
to select
the person that you wish to talk to.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Multiparty”, then press
4. Press
or
to select “Private”, then press
5. Once you have finished the private conversation,
press A [Options] and select “Multiparty”,
then press
6. Press
or
to select “Join All”, then press
to return to the conference call.
Call Functions
26
Muting the Dial Tone (DTMF Tone)
1. During a call, press A [Options] and select “DTMF
Tones”, then press
2. Press
or
to select “Off”, then press
To unmute the dial tone, repeat step 1 and then
select “On” in step 2.
Muting the Microphone
1. During a call, press C [Mute] to mute the
microphone.
To unmute the microphone, press C [Unmute].
27
Call Functions
Call Functions
28
Entering Characters
Key
When entering characters to create Phonebook entries,
SMS or MMS, etc., press the corresponding keys.
In normal input mode, press each key until the desired
character appears. For example, press H once for the
letter “A” or twice for the letter “B”.
Table of Characters
Pressing each key scrolls characters in the following
order. The order varies depending on the language
selected.
English Mode
Upper Case
Characters
Key
29
Lower Case
Characters
Nume
ric
. (full-stop) , (comma) - (hyphen) ? !
’ (apostrophe) @ _ ( ) / ” :1
ABC2ÃÁÀÂÄÅÆÇ
abc2ãáàâäåæç
DEF3ÉÊÈË
def3éêèë
GHI4ÍÎÌÏ
ghi4íîìï
JKL5
jkl5
MNO6ÕÓÔÒÖØÑ
mno6õóôòöøñ
PQRS7
pqrs7ß
Entering Characters
Upper Case
Characters
TUV8ÚÜÙÛ
WXYZ9ÝÞ
(space)+ = < >
Lower Case
Characters
tuv8úüùû
Nume
ric
wxyz9ýþ
£ $ ¥ % &0
*+P?
(space)
G - O:Press and hold to enter 0 - 9 numbers.
P:
Press and hold to shift to Sentence mode,
R:
Capital letter, Small letter, Numeric.
Press and hold to shift between Normal
and T9 mode.
Changing the Input Languages
1. On the text entry screen, press A [Options] to
display the Options Menu.
or
to select “Input Language”, then
press
2. Press
3. Select the desired language, then press
Changing the Input Mode
T9 Text Input
T9 text input method is a shortcut to enter text easily
and quickly.
1. On the text entry screen, press A [Options] to
display the Options menu.
2. Press
or
to select the desired T9 mode (T9
Abc, T9 ABC, T9 abc), then press
“ ” will be displayed on the Main Display.
3. Press each key once for any letter you require on
that key.
To enter the word “How”, press J L O.
4. Press
or
until the correct word is shown if
the character combination, that was initially
displayed, is not correct.
5. Press
to select the word.
Note
• If the correct word is not shown in step 3, enter the
correct word again after switching to the normal
input mode.
Tip
• If you press Q instead of step 4, a space is inserted
next to the selected word.
Symbols and Punctuation
To enter symbols or punctuation, press R.
Using Text Template
You can use the sentences registered in My Text
Templates when entering characters.
For details on creating the text template, see “Adding
Phrases to My Text Templates” on page 80.
1. On the text entry screen, press A [Options] to
display the Options Menu.
2. Press
or
to select “Insert Template”, then
press
3. Select a desired text template, then press
The selected text template will be inserted.
4. Put the cursor to the position where the selected text
template should be inserted, then press
The selected text template will be inserted.
Entering Characters
30
Copying, Cutting and Pasting Text
Using these options, you can complete editing
smoothly.
To copy and cutting text
1. On the text entry screen, press A [Options] to
display the Options Menu.
2. Press
or
to select "Copy" or "Cut", then
press
3. Move the cursor to the first letter to be copied or to
be cut, then press
4. Move the cursor to the last letter to highlight the
area, then press
The highlighted area will be saved temporarily in
the memory.
To paste text
1. On the text entry screen, press A [Options] to
display the Options Menu.
2. Press
or
to select "Paste", then press
3. Move the cursor to the point where you want to
paste the letters.
31
Entering Characters
Entering Characters
32
Using the Menu
Using the Main Menu
To return to the previous screen, press C [Back] if the
right soft key displays [Back].
To close the Main Menu,press C [Exit].
Operation Guidance
Your phone uses soft keys to help you to navigate the
phone (A and C). These keys change usage depending
on the situation. The function of each soft key at any
given time is highlighted at the bottom left and bottom
right of the screen.
Shortcut Keys
When pressing several key combinations during standby mode, you can shortcut to the specified menus.
To access the desired menu directly, press
and digit
keys for the menu’s corresponding number during
stand-by mode. See the following table as reference.
1. Press
2. Press
during stand-by mode.
or
to navigate to required
location.
3. Press
to access function.
Pressing digit keys for the menu’s corresponding
number also accesses function. In this manual, the
operation to access function is described by the
navigation keys operation.
33
Using the Menu
Example: To access “Language” Sub Menu using
shortcut keys
Press
M G G.
Note
• The shortcut keys work for the first three menu levels
only.
Side-Up/Side-Down Keys
The side-up and down keys function the same as
pressing
or
Using the Menu
34
List of Menu Functions
Menu No./
Main Menu
1 Profiles
2 My Phone
3 Fun&Games
4 Messages
5 Camera
Menu No./
Sub Menu1
1 Normal
2 Meeting
3 Activity
4 Car
5 Silent
1 My Java™
2 My Pictures
3 My Movies
4 My Sounds
5 My Bookmarks
6 My Text Templates
7 Memory Status
8 Info-Service (SAT)*
1 Java™
2 Melody Editor
3 Tone Editor
1 MMS
2 SMS
3 Cell Broadcast
4 Cell Info
5 Vodafone Messenger
6 Vodafone Mail
1 Still Camera
2 Movie Camera
Menu No./
Main Menu
6 Vodafone live!
7 Settings
8 Organiser
9 Call Manager
Menu No./
Sub Menu1
1 Vodafone live!
2 New
3 Chat
4 Games
5 Find & Seek
6 News
7 Sport
8 Shopping
9 Search
1 Phone Settings
2 Call Settings
3 Network Settings
4 Internet Settings
5 Infrared
6 Security
7 Master Reset
1 Calculator
2 Calendar
3 Clock & Alarm
4 Voice Memo
5 PC Link
6 Help List
1 Phonebook
2 Call Register
3 Diverts
4 Speed Dial List
5 Own Numbers
* Depends on the contents of SIM card.
35
Using the Menu
Using the Menu
36
Phonebook
You can store the phone numbers and E-mail addresses
of your friends, family and colleagues in the
Phonebook.
Your phone can store up to 500 entries. In a Phonebook,
you can store the following items.
Items stored on handset memory
Name:
Up to ## characters, ## numbers /
entry
Phone number: ## digit, 3 phone numbers / entry
E-mail Address: Up to ## characters, 2 addresses /
entry
Group:
###########
Home Address: Up to ## characters
Note:###
Items stored on SIM memory
Name:
Phone number:
37
Phonebook
Up to ## characters, ## numbers /
entry
##, 1 phone number / entry
Changing the Memory to be Referred
To
Phonebook entries are managed respectively for
handset memory or SIM memory to store new entries
and view them.
1. Press
to display the Main menu.
2. Press
or
to select “Call Manager”,
then press
3. Press
or
to select “Phonebook”, then press
4. Press A [Options] to display the Options Menu.
5. Press
or
to select “Advanced”, then press
Creating a New Entry
When you store new entries
6. Press
7. Press
or
to select “Save to”, then press
or
to select “Handset”, “Choice” or
“SIM”, then press
When selecting “Choice”, you can choose SIM card
or phone memory every time you store a new
Phonebook entry.
When you view the Phonebook entry
6. Press
7. Press
press
or
to select “Refer to”, then press
or
to select “Handset” or “SIM”, then
You can choose either the phone (up to 500) or SIM
card memory locations to store the new entry. For
switching the locations, see “Changing the Memory to
be Referred To” on page 37.
The amount of phone numbers that you can store to the
SIM card is dependant on its capacity. Contact your
network operator for SIM details.
1. Perform steps 1 to 7 in “Changing the Memory to be
Referred To” on page 37.
If you select SIM card for storing a new entry, you
do not need to perform steps 7 to 15 in this section.
2. Press
or
to select “New”, then press
The “New Entry” screen appears.
3. Press
or
to move the cursor to the name
field, then press
The name entry screen appears.
4. Enter a name, then press
For details on entering characters, see “Entering
Characters” on page 29.
5. Press
or
to move the cursor to the phone
field, then press
The phone number entry screen appears.
Phonebook
38
6. Enter the phone number, then press
Up to 40 digits can be entered.
7. Press
or
to select a desired number type,
then press
8. Press
or
to move the cursor to the E-mail
field, then press
The E-mail entry screen appears.
9. Enter an E-mail address, then press
10. Press
or
to move the cursor to the group
field, then press
The group selection screen appears.
11. Press
or
to select the desired group, then
press
12. Press
or
to move the cursor to the address
field, then press
The address entry screen appears.
13. Enter an address, then press
14. Press
or
to move the cursor to the note field,
then press
15. Enter a note, then press
16. Press C [Save].
39
Phonebook
Adding a Thumbnail Image to Entries
You can add a thumbnail image to entries on handset
memory.
1. Perform step1 to 3 in “Changing the Memory to be
Referred To” on page 37.
2. Press
or
to select the desired entry to which
you want to add a thumbnail picture, then press
3. Press A [Options] to display the Options Menu.
4. Press
or
to select “Thumbnail”, then press
5. Press
press
or
to select the desired picture, then
6. Press C [Save] to save the entry.
To change the picture embedded, select “Change”
instead in step 4, then press
or
to select the
desired picture and press
Press A [Save].
To remove the picture embedded, select “Remove”
instead instep 4.
On the confirmation screen that appears, press A
[Yes].
Note
• When an image from the Saved Pictures gallery has
been allocated as a thumbnail it is protected, and
cannot be deleted from Saved Pictures gallery. In
order to delete the image you will first need to
remove the thumbnail in the Phonebook, then delete
the image in Saved Pictures.
Adding the Phone Number from the Call Log
Entries
1. Display the call log entry you wish to store (p. 161).
2. Press
3. Press
press
or
to select “Save to Phonebook”, then
4. Follow the procedure in “Creating a New Entry” on
page 38.
Storing after Inputting a Phone Number
1. Enter the phone number, then press A [Save].
2. Follow the procedure from steps 3 to 16 in
“Creating a New Entry” on page 38.
Copying Entries from Handset to SIM Card
You can copy entries from the handset memory to SIM
card one by one.
1. Perform steps 1 to 3 in “Changing the Memory to be
Referred To” on page 37.
or
to select the desired entry you want
to copy to SIM card.
2. Press
3. Press A [Options] to display the Options Menu.
4. Press
or
to select “Copy to SIM”, then press
5. Press A [Yes].
Copying All Entries from SIM Card to Handset
You can copy all entries from SIM card to the handset
memory at a time.
1. Perform 1 to 3 in “Changing the Memory to be
Referred To” on page 37.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Advanced”, then press
4. Press
or
to select “Copy All from SIM”,
then press
5. Press A [Yes].
Phonebook
40
Finding a Name and Number
Two methods of searching through the Phonebook are
available:
1. Perform steps 1 to 4 in “Changing the Memory to be
Referred To” on page 37.
2. Select “Search”, then press
• If no entries are found in the list, you can create an
entry from the list. Press A [Options]. Then follow
the procedures as described on page 38.
• To view the address of the entry, press A [Options]
in step 5, then select “View”. Press C [Back] to go
back the detailed screen.
3. Enter a name or the first character(s) of the name.
Editing Phonebook Entries
Matched results will be displayed alphabetically.
If there is no entry in the Phonebook that satisfies
the exact search criteria, the name that is nearest
alphabetically matching will be displayed.
4. Press
or
to scroll through list for selecting
the desired name, then press
The detailed screen of the Phonebook appears.
5. Press D.
You can edit Phonebook entries searching from the
Phonebook list or from each Phonebook entry.
1. Search for the desired Phonebook entry.
For details on searching through Phonebook entries,
see “Finding a Name and Number”.
2. Press A [Options] to display the Options Menu.
6. Press
or
then press
to select the desired phone number,
to dial.
Tip
• You can also dial the desired phone number by
pressing the digit key corresponding to the list
number instead of step 6.
• If you select “SIM Entry” for “Refer to” option in
Phonebook menu (p. 37), only one phone number
entry will be displayed.
41
Phonebook
3. Press
or
to select “Edit”, then press
4. Edit entry as required.
5. Press
If you wish to edit another item, repeat steps 1 to 5.
6. Press C [Save] to save the change(s).
Deleting a single Phonebook Entry
Viewing Groups
1. Search for a desired Phonebook entry.
You can set the available group names when you store/
edit the Phonebook.
1. Perform steps 1 to 4 in “Changing the Memory to be
Referred To” on page 37.
2. Press
or
to select “View Groups”, then press
For details on searching through Phonebook entries,
see “Finding a Name and Number” on page 41.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Delete”, then press
4. Press A [Yes], then press
The selected entry will be deleted.
To cancel deletion, press C [No] in step 4.
Deleting All Phonebook Entries
1. Perform steps 1 to 5 in “Changing the Memory to be
3. Select “Select Current” to view the current group, or
“Select All” to view all groups.
“ ” indicates that the group has been selected.
To cancel the selected group, press
again.
The checkbox becomes blank again.
Referred To” on page 37.
or
to select “Delete All Entries”, then
press
2. Press
3. Enter your handset code, then press
4. Press
or
to select “Handset Entries” or “SIM
Entries”, then press
5. Press A [Yes], then press
To cancel deletion, press C [No] in step 5.
Phonebook
42
Memory Status
Speed Dial List
This function helps you to check the number of entries
stored in the Phonebook.
1. Perform steps 1 to 4 in “Changing the Memory to be
Referred To” on page 37.
2. Press
or
to select “Memory Status”, then
press
You can set a maximum of 9 phone numbers to the
Speed Dial List.
You can check the memory status of SIM card and
handset.
Note
• The number of locations available on the SIM is
dependant on its capacity.
Adding Phonebook entries to the Speed Dial
List
1. Search for the desired Phonebook entry.
For details on searching through Phonebook entries,
see steps 1 to 4 in “Finding a Name and Number” on
page 41.
2. Press A [Options].
3. Press
or
to select “Speed Dial”, then press
4. Press
or
to select the number you wish to
add, then press
Viewing the Speed Dial List (?)
1. Perform steps 1 and 2 in “Changing the Memory to
be Referred To” on page 37.
2. Press
or
to select “Speed Dial List”, then
press
The stored names and phone numbers in the
selected entry are displayed in order.
43
Phonebook
Sending Messages
1. Search for the desired Phonebook entry.
For details on searching through Phonebook entries,
see “Finding a Name and Number” on page 41.
2. Press A [Options] to display the Options Menu.
3. Press
4. Press
press
or
to select “Message”, then press
or
to select “MMS” or “SMS”, then
5. Press
or
to select the desired number, then
press
Or press the corresponding digit keys.
6. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 99 or “Creating a New SMS”
on page 110.
Phonebook
44
Camera (M 5)
5. Press A [Save].
Your phone incorporates an integrated digital camera.
This allows you to take and send pictures or movies
wherever you are.
“Save to My Phone” is displayed, then the picture is
registered.
If you send a picture by MMS after taking the
picture, press
in step 6.
6. Press F to return to stand-by.
Still Camera (M 5-1)
Put the phone into the still camera mode to take a
picture.
You can send the pictures registered in the Saved
Pictures with your message.
Picture format to be saved is in JPEG in the following
three picture sizes.
Small:
120 × 160 dots
Medium: 240 × 320 dots
Large:
480 × 640 dots
Taking Pictures
1. Press
to display the Main Menu.
2. Confirm that “Camera” is selected, then press
3. Press
or
to select “Still Camera”, then press
The preview is displayed through the main display.
4. Press
or side-down key to take the picture.
The shutter sound occurs and the static image of the
taken picture is displayed.
45
Camera
Note
• The Large size images to be recorded may limit
communication functions.
Tip
• Pressing A during stand-by also launches “Still
Camera”.
• To leave Still Camera Mode without registering the
taken picture after step 4 in “Taking Pictures”:
Press F and Press A [Yes].
• When the distance to the subject is about 5 cm, set the
Macro Dial to
When the distance to the subject is about 40 cm or
more, set the Macro Dial to
• To take a picture of yourself, set the Macro Dial to
the
position to preview the image through the
external display, then press
or side-down key.
To switch the finder
Press P when the preview is displayed.
Each time you press P, the finder switches between
the external display and the main display. When you
use the external display as the finder, the taken pictures
are saved automatically.
Taking Macro Pictures
1. In still camera mode, set the Macro Dial to the
position.
2. Press
or side-down key to take the picture.
To cancel macro mode, set the Macro Dial to the
normal position
Using the Zoom Function
Zooming ratio can be altered between “Wide”, “×2”,
and “×4”. Press A or C to change the zooming ratio.
To select the picture size
1. Press A [Options] before step 5 in “Still Camera” to
display the Options Menu.
2. Press
or
to select “Select Picture Size”, then
press
3. Press
or
to select the picture size, then press
Selecting the Picture Quality
1. In still camera mode, press A [Options].
The Options Menu is displayed.
2. Press
or
to select “Picture Quality”, then
press
3. Press
press
or
to select “Normal” or “Fine”, then
Note
• When “Select Picture Size” is set to “Small”, you
can use the zoom function in three magnifications
(×1, ×2, ×4).
• When “Select Picture Size” is set to “Medium”, you
can use the zoom function in two magnifications (×1,
×2).
• When “Select Picture Size” is set to “Large”, you
cannot use the zoom function.
Camera
46
Retaking Pictures
After steps 1 to 4 in “Taking Pictures” on page 45, press
C [Cancel].
Further shooting is available.
Note
• The Digital Camera Uses a CCD Sensor. Although
this camera has been manufactured to the highest
specification, some pictures may still appear too
bright or too dark.
• If the phone has been left in a warm place for a long
time before taking or registering a picture, the
picture quality may be poor.
In the Case of No Available Memory
When the number of pictures that can be taken becomes
4 or less, or when the remaining capacity becomes 27.5
Kbytes (when “Medium” is selected as the picture size)
or less, the remaining shots indicator in the upper left of
the screen turns in red. (The number of pictures that can
be taken is approximate.)
When the number of pictures that can be taken becomes
0, and when you try to take a picture again, “Can not
take a picture. Maximum Capacity” is displayed.
47
Camera
Meanings of Indicators in Still Camera Mode
Remaining shots indicator
000: Indicates the remaining number of pictures
that can be taken.
Flash light indicator
Indicates when the flash light is turned on.
: Normal mode
: Macro mode
Delay timer indicator (p. 49)
: Indicates when Timer is set.
Continuous shooting indicators
Indicates the shooting mode.
: Single shot
: Double shot
: Triple shot
: Quadplex shot
Picture size indicators (p. 46)
Large:
480 × 640 dots
Medium (default): 240 × 320 dots
Small:
120 × 160 dots
Picture quality indicators
Indicates the quality (normal or fine) of the picture
to be taken.
: Fine
: Normal
Picture brightness (exposure level) indicators
: Bright
: Normal
: Dark
Zooming ratio indicators
Indicates the magnification (×1, ×2, ×4).
: Original size
: Double size
: Quadplex size
Making Adjustments According to Lighting
Conditions
Viewing the Taken Pictures
The taken pictures can be viewed in the Saved Pictures.
1. In still camera mode, press A [Options].
The Options Menu is displayed.
2. Select “Existing Pictures”, then press
The list of Saved Pictures is displayed.
3. Press
or
to select the file name you wish to
view, then press
The selected picture is displayed.
4. Once you have finished, press C [Back] to return to
the list.
Tip
• Your pictures are given file names which is
“pic_nnn.jpg” (nnn is a three-digit consecutive
number).
The file name, date and size of your pictures are
displayed in the list of Saved Pictures.
Adjusting the Brightness of the Picture
Press
or
to adjust the brightness of the picture.
Once the phone has returned to the stand-by screen the
brightness settings return to default.
Camera
48
Using the Timer
Taking a Picture with the Timer
1. In still camera mode, press A [Options].
The Options Menu is displayed.
2. Press
or
to select “Delay Timer”, then press
3. Press
or
to select “On”, then press
“
” appears on the screen and the phone returns
to still camera mode.
4. Press
or side-down key to start the delay timer.
10 seconds after the timer sound occurs, the camera
takes a picture, and the shutter sound occurs.
49
Camera
Note
• Whilst the delay timer is operating, the flash light and
the indicator flash.
• If
is pressed whilst the delay timer is operating,
the picture is taken instantly.
• If there is an incoming call or alarm functioning,
or F is pressed, whilst the delay timer is operating,
the camera operation is cancelled. In this case, the
timer setting is cancelled.
• The zooming function with A or C, the adjustment of
brightness of the picture with
or
, or selecting
the frame, is unavailable whilst the delay timer is
operating.
• If you wish to stop taking pictures with the timer,
press C [Cancel] whilst the delay timer is operating.
Cancelling the Delay Timer
Four pictures are taken continuously. There is Auto
Shooting and Manual Shooting available.
Auto Shooting: Four pictures are taken in a row by
pressing
Manual Shooting: Pictures are taken one by one by
pressing
1. Press A [Options] whilst the delay timer setting is
on.
The Options Menu is displayed.
2. Press
or
to select “Delay Timer”, then press
3. Press
“
or
to select “Off”, then press
” goes off.
Continuous Shooting
Four pictures are taken continuously. There is Auto
Shooting and Manual Shooting available.
Auto Shooting: Four pictures are taken in a row by
pressing
Manual Shooting: Pictures are taken one by one by
pressing
1. In still camera mode, press A [Options].
The Options Menu is displayed.
2. Press
or
to select “Continuous Shooting”,
then press
3. Select “Auto Shooting” or “Manual Shooting”, then
press
To cancel Continuous Shooting, select “Off”.
4. Press
or side-down key to start continuous
shooting.
When the continuous shooting is completed, the
taken pictures are saved automatically.
To stop Continuous Shooting, press C [Cancel].
Note
• When “Select Picture Size” is set to “Large”, you
cannot use the Continuous Shooting function.
Selecting the Frame
You can select the frame from 10 preset patterns. You
can also select a frame in the Saved Pictures as the
frame.
1. In still camera mode, press A [Options].
The Options Menu is displayed.
2. Press
or
to select “Select Frame”, then press
3. Press
or
to select “Preset Frames” or “My
Pictures”, then press
Camera
50
4. Press
or
to select the frame you wish to use,
then press
Note
• When “Select Picture Size” is set to “Large”, you
cannot use the Frame function.
• Only the images of PNG format can be selected as the
frame if you select “My Pictures” in step 3.
Selecting the Light Colour
1. In still camera mode, press A [Options].
The Options Menu is displayed.
2. Press
or
to select “Light Colour”, then press
3. Press
or
to select the desired colour, then
press
To turn off the flash light, select “Off”.
Tip
• Each time R or side-up key is pressed, the status of
the flash light changes as follows.
Off o On (brightness for normal mode) o On
(brightness for macro mode) o Off
Selecting the Shutter Sound
You can select the shutter sound from 3 preset patterns.
1. In still camera mode, press A [Options].
51
Camera
The Options Menu is displayed.
or
to select “Shutter Sound”, then
press
To play back the shutter sound, press A [Play].
3. Press
or
to select the desired sound, then
press
2. Press
Sending Pictures
See “Sending Messages” on page 72 for instructions.
Deleting Pictures
See “Deleting Pictures” on page 72 for instructions.
Movie Camera (M 5-2)
Put the phone into the movie camera mode to record a
movie.
You can send the movies registered in the Saved
Movies with your message.
Movie format to be saved is in “.3gp” or “.mp4”.
Recording Movies
The maximum length of recording is about 5 secords.
Sound can be recorded with the movie.
1. Press
to display the Main Menu.
2. Press
or
to select “Camera”, then
press
3. Press
or
to select “Movie Camera”, then
press
The preview is displayed through the main display.
4. Press
or side-down key to start recording the
movie.
The sound for recording movie occurs.
If you press
or side-down key again, or when
the recording is completed, the sound for ending
movie recording occurs and the display transits to
step 5.
5. Press
or
to select “Save”, then press
“Save to My Phone” is displayed, then the movie is
registered.
If you preview a movie before saving, select
“Preview” in step 6.
If you send a movie by MMS after recording the
movie, select “Send Message” in step 6.
To switch the finder
Press P when the preview is displayed.
Each time you press P, the finder switches between
the external display and the main display.
Recording Macro Movies
1. In movie camera mode, set the Macro Dial to the
position.
2. Press
or side-down key to start recording the
movie.
To cancel macro mode, set the Macro Dial to the
normal position.
Using the Zoom Function
Zooming ratio can be altered between “Wide”, “×2”,
and “×4”. Press A or C to change the zooming ratio.
To select the movie format
1. Press A [Options] before step 4 in “Recording
Movies” to display the Options Menu.
2. Press
or
to select “Movie Format”, then
press
3. Press
press
or
to select “.3gp” or “.mp4”, then
To select the movie quality
1. Press A [Options] before step 4 in “Recording
Movies” to display the Options Menu.
or
to select “Movie Quality”, then
press
2. Press
3. Press
or
to select the “Normal” or “Fine”,
then press
Camera
52
In the Case of No Available Memory
When the number of pictures that can be taken becomes
5 or less, or when the remaining capacity becomes 27.5
Kbytes (when “Medium” is selected as the picture size)
or less, remaining sets indicator in the upper left of the
screen turns in red. (The number of sets that can be
recorded is approximate.)
When the number of pictures that can be taken becomes
0, and when you try to take a picture again, “Can not
take a picture. Maximum Capacity” is displayed.
Meanings of Indicators in Movie Camera Mode
Delay timer indicator (p. 54)
: Whilst the timer setting is on.
Flash light indicator
Indicates when the flash light is turned on (when in
macro mode, ## indicates).
Movie quality indicators
Indicates the quality (normal or fine) of the movie to
be recorded.
53
Camera
Movie brightness (exposure level) indicators (p. 54)
: Bright
: Normal
: Dark
Zooming ratio indicators
Indicates the magnification (×1, ×2, ×4).
Remaining sets indicator
Indicates the remaining number of movies that can
be recorded.
Making Adjustments According to Lighting
Conditions
Adjust the Brightness of the Movie
Press
or
to adjust the brightness of the movie.
Once the phone has returned to the stand-by screen, the
brightness settings return to default.
Viewing the Recorded Movies
The recorded movies can be viewed in the Saved
Movies.
1. In movie camera mode, press A [Options].
2. Press
or
to select “Existing Movies” then
press
The list of Saved Movies is displayed.
3. Press
or
to select the file name you wish to
view, then press
4. Press
The selected movie is played back.
To pause playing back, press
To resume playing back, press
again.
To stop playing back, press C [Back].
To enlarge the movie, press A [×2].
5. Once you have finished, press C [Back] to return to
the list.
Tip
• Your movies are given file names which is
“mov_nnn.3gp” (nnn is a three digit consecutive
number) or “mov_nnn.mp4” (nnn is a three digit
consecutive number).
• If the movie has been recorded with sound, the sound
volume can be adjusted.
• The sound volume depends on the settings of Ringer
Volume (p. 58). The sound volume becomes 0 when
“Ringer Volume” is set to “Silent” or “Step Tone”.
Using the Timer
Recording a movie with the Timer
1. In movie camera mode, press A [Options].
The Options Menu is displayed.
2. Press
or
to select “Delay Timer”, then press
3. Press
or
to select “On”, then press
“
” appears on the screen and the phone returns
to movie camera mode.
4. Press
or side-down key to start the delay timer.
10 seconds after the timer sound occurs, the camera
starts recording a movie.
Camera
54
Note
• Whilst the delay timer is operating, the flash light and
the indicator flash.
• If
is pressed whilst the delay timer is operating,
the movie is recorded instantly.
• If there is an incoming call or alarm functioning,
or F is pressed, whilst the delay timer is operating,
the camera operation is cancelled. In this case, the
timer setting is cancelled.
• The zooming function with A or C, or the adjustment
of brightness of the movie with
or
, is
unavailable whilst the delay timer is operating.
• If you wish to stop recording movies with the timer,
press C [Cancel] whilst the delay timer is operating.
Cancelling the Delay Timer
1. Press A [Options] whilst the delay timer setting is
on.
The Options Menu is displayed.
2. Press
or
to select “Delay Timer”, then press
3. Press
“
or
to select “Off”, then press
” goes off.
Recording Movies with Sound
1. In movie camera mode, press A [Options].
The Options Menu is displayed.
2. Press
or
to select “Voice Record”, then
press
3. Press
or
to select “On”, then press
To cancel recording movies with sound, select
“Off” in step 3.
55
Camera
Selecting the Light Colour
1. In movie camera mode, press A [Options].
The Options Menu is displayed.
2. Press
or
to select “Light Colour”, then press
3. Press
or
to select the desired colour, then
press
To turn off the flash light, select “Off”.
Tip
• Each time R or side-up key is pressed, the status of
the flash light changes as follows.
Off o On (brightness for normal mode) o On
(brightness for macro mode) o Off
Sending Movies
See “Sending Messages” on page 74 for instructions.
Deleting Movies
See “Deleting Movie files” on page 75 for instructions.
Camera
56
Profiles (M 1)
You can easily alter the phone tone (e.g. the ringer
volume, keypad tones, etc.) according to your
environment.
Tone sound and vibration set can be customised for
each profile.
There are 5 profiles including one user definable
profile:
• Normal
• Meeting
• Activity
• Car
• Silent
Activating a Profile
1. Press
2. Press
press
to display the Main Menu.
or
to select “Profiles”, then
3. Press
or
to select the profile you wish to
activate, then press
57
Profiles
Note
• When a profile is set, the icon which corresponds to
the profile name appears in the stand-by screen:
Normal:
Is the default setup. (not displayed
in the stand-by screen)
Meeting:
For use when discretion is needed.
Activity:
For use in busy environments.
Car:
For use in the car. (connected to a
hands free kit)
Silent:
For use when silence is needed.
All sounds are muted and you are
alerted to calls with the vibrator.
Tip
• You can also activate a profile by pressing and
holding R for approximately 2 seconds instead of
steps 1and 2.
Customising Profiles
1. Perform steps 1 and 2 in “Activating a Profile”.
2. Press
or
to select the profile you wish to
customise, then press A [Options].
3. Press
or
to select “Personalise”, then press
Ringer Volume
4. Press
You can adjust the ringer volume to one of 5 levels.
When it is set to “Silent”, the volume of Java™
applications is muted.
5. Change the setting you want.
1. Perform steps 1 to 3 in “Customising Profiles” on
or
to select the setting you wish to
customise, then press
For details about settings, see pages 58 to 63.
page 57.
2. Press
Resetting Profile Settings
1. Perform steps 1 and 2 in “Activating a Profile” on
page 57.
2. Press
or
to select the profile you wish to
reset, then press A [Options].
3. Press
press
or
to select “Set to Default”, then
or
to select “Ringer Volume”, then
press
The current volume level is displayed.
3. Press
to increase the ringer volume or press
to decrease the ringer volume and then press
To select “Step Tone”, press
at level 5.
To select “Silent”, press
at level 1.
4. Enter your handset code, then press
5. Press A [Yes].
To cancel the resetting, press C [No].
Note
• If you enter a wrong handset code in step 4, the
screen returns to step 3.
Profiles
58
Ringer Type
Vibration
You can select the ring tone from 28 tones including 5
patterns, 13 sound effects and 10 melodies. You can
also select a sound in the Saved Sounds as the default
ring tone excluding the WAVE format.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press
or
to select “Assign Melody”, then
press
When the vibrator option is set to on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press
or
to select “Vibration”, then press
3. Press
or
to select “Preset Melody” or “My
Sounds”, followed by
4. Press
or
to select the ring tone you wish to
use.
If you wish to hear the demo, press A [Play].
To stop playing, press A [Stop].
5. When selection is complete, press
59
Profiles
3. Press
or
to select “Enable”, “Disable” or
“Link to Sound”, then press
Tip
• When “Link to Sound” is selected in step 3, melodies
are synchronised with the vibrator for the ring tone.
However, this function may not work depending on
data.
• When you select “Enable” or “Link to Sound” in step
3, “ ” appears on the stand-by screen.
Keypad Tones
8. Select the keypad tone.
When the keypad tone is set to on, you will hear a
confirmation tone each time you press a numerical key.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press
or
to select “Keypad Tones”, then
press
For details on selecting a ring tone, see “Ringer
Type” on page 59.
9. Press
or
to select “Duration”, then press
3. Press
This function enables your phone to emit the warning
tone when an error occurs.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press
or
to select “Warning Tone”, then
press
or
to select “On” or “Off”, then press
If you select “Off”, the screen returns to step 1.
4. Set “Volume”, then press
5. Press
to increase the volume or press
decrease the volume, then press
6. Press
7. Press
or
to select “Tone”, then press
to
or
to select either “Preset Melody”,
“My Sounds” or “Default Tone”, then press
When you select “Preset Melody” or “My Sounds”
in step 7:
10. Press
or
to set the duration, then press
Warning Tone
3. Press
or
to select “On” or “Off”, then press
If you select “Off”, the screen returns to step 1.
4. Select “Volume”, then press
5. Press
to increase the volume or press
decrease the volume, then press
to
Profiles
60
6. Press
7. Press
or
to select “Tone”, then press
3. Press
or
to select “On” or “Off”, then press
If you select “Off”, the screen returns to step 1.
4. Select “Volume”, then press
or
to select “Preset Melody” or “My
Sounds”, then press
8. Select the warning tone.
For details on selecting a ring tone, see “Ringer
Type” on page 59.
9. Press
or
to select “Duration”, then press
10. Press
or
5. Press
to increase the volume or press
decrease the volume and then press
to select the duration, then press
Power On/Off Sound
You can set up to emit a sound and select the melody,
volume and duration when the phone is turned on or off.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press
or
to select “Power On Sound” or
“Power Off Sound”, then press
61
Profiles
6. Press
7. Press
or
to
to select “Sound”, then press
or
to select “Preset Melody” or “My
Sounds”, then press
8. Select the ring tone.
For details on selecting a ring tone, see “Ringer
Type” on page 59.
9. Press
or
to select “Duration”, then press
10. Enter the duration of ring tone in 2 digits (01 to 10
seconds) using the digit keys, then press
Message Alert
8. Select the ring tone.
When receiving messages, special ring tones can be set.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press
or
to select “Message Alert”, then
press
For details on selecting a ring tone, see “Ringer
Type” on page 59.
9. Press
or
to select “Vibration”, then press
3. Press
or
to select “MMS”, “SMS” or
“WAP”, then press
4. Select “Volume”, then press
5. Press
to increase the volume or press
decrease the volume and then press
6. Press
7. Press
or
or
to select “Enable”, “Disable” or
“Link to Sound”, then press
11. Press
or
to select “Duration”, then press
12. Enter the duration of ring tone in 2 digits (01 to 15
seconds) using the digit keys, then press
to
to select “Sound”, then press
10. Press
or
to select “Preset Melody” or “My
Sounds”, then press
Low Battery Alert
Adjust the volume of the alarm when the battery
becomes low.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press
or
to select “Low Battery Alert”, then
press
3. Press
to increase the volume or press
decrease the volume and then press
to
Profiles
62
Any Key Answer
1. Perform steps 1 to 3 in “Customising Profiles” on
page 57.
2. Press
press
3. Press
or
to select “Any Key Answer”, then
or
to select “On” or “Off”, then press
63
Profiles
Profiles
64
My Phone (M 2)
My Phone contains several types of picture, video clip
and sound data along with Java™ applications which
can be controlled collectively. Also included in My
Phone are frequently used text message phrases and
accessed WAP pages (addresses) which you can use
and edit.
My Java™ (M 2-1)
Along with the preloaded Java™ application,
downloaded applications are stored in the Saved
Java™.
Your phone has one preloaded Java™ application.
Note
• The phone can store approximately 2Mbytes of
information across the Saved Java™, Saved
Pictures, Saved Movies and Saved Sounds. The Saved
Java™ can store up to 50 applications.
Using Java™ Applications
Various kinds of Vodafone specific Java™ applications
can be used in this phone.
To use Java™ applications, download the Java™
applications via the mobile Internet.
65
My Phone
Some Java™ applications offer the ability to connect to
a network either within a game or network based
application.
Note
• Java™ applications may be both localised (no
connectivity) and network based (using the mobile
Internet to update information/play games). The
network may charge you more for using networkbased applications. Please contact your service
provider for more information.
Downloading Java™ Applications
Confirmation screen
Before downloading the Java™ application you will be
asked to confirm what you are about to receive.
After checking the information on the confirmation
screen, the Java™ application can be downloaded.
Note
• User authentication might be required before
downloading the application on some information
screens.
Download (M 2-1-2)
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
Executing Java™ Applications (M 2-1-1)
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
3. Press
3. Press
or
to select “My Java™”, then press
4. Press
or
to select “Download More”, then
press
The Java™ application download site is displayed.
5. Press
or
to select the Java™ application you
wish to download.
After a WAP browser is displayed variously, the
confirmation screen will appear after a whilst.
6. Press A [Get].
Downloading starts.
7. Press A [OK] even if it carries out complete.
or
to select “My Java™”, then press
4. Press
or
to select “Saved Java™”, then
press
The list of Saved Java™ is displayed.
The downloaded Java™ applications are
sequentially displayed from the latest one.
5. Press
or
to select the title of the Java™
application you wish to execute, then press
The selected Java™ application is executed.
When using network connection type Java™
applications, connection to the network can be
selected.
When selecting the Java™ Wallpaper application,
you will be asked whether to select it for Java™
Wallpaper. Select “Yes” or “No”.
My Phone
66
3. Press
To end the Java™ application
1. Press F.
2. Press
or
to select “End”, then press
The screen returns to stand-by screen.
To suspend the Java™ application
1. Press F.
2. Press
or
to select “Suspend”, then press
To resume the Java™ application, press
during
stand-by screen and select “Resume”, then press
Checking the Information of the Java™
Application
1. Perform steps 1 to 4 in “Executing Java™
Applications” on page 66.
2. Press
or
to select the Java™ application you
wish to check, then press A [Options].
The Options Menu is displayed.
67
My Phone
or
to select “Property”, then press
The detailed information screen is displayed.
4. Press
or
to scroll through the screen.
5. When you have finished, press C [Back] twice.
The screen returns to the list.
Deleting Java™ Applications
1. Perform steps 1 to 4 in “Executing Java™
Applications” on page 66.
2. Press
or
to select the Java™ application you
wish to delete, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Delete”, then press
4. Press A [Yes].
The selected application is deleted.
To cancel deletion, press C [No] in step 4.
Note
• You cannot delete preloaded Java™ applications.
My Pictures (M 2-2)
Pictures that are taken by a digital camera or images
that are downloaded from mobile Internet sites can be
managed.
: Images in PNG format
: Pictures in JPEG format
: e-Animation file (NEVA)
: Images in GIF format
: Images in BMP format
: Images in WBMP format
: Images in WPNG format
Using as Wallpaper
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
3. Press
or
to select “My Pictures”, then press
4. Press
or
to select “Saved Pictures”, then
press
The list of Saved Pictures is displayed.
5. Press
or
to select the file name you wish to
use as wallpaper, then press A [Options].
The Options Menu is displayed.
6. Press
or
to select “Wallpaper”, then press
7. Press
or
to select “Main Display” or
“External Display”, then press
Adding to Phonebook
1. Perform steps 1 to 4 in “Using as Wallpaper”.
2. Press
or
to select the file name you wish to
add to Phonebook, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Add to Phonebook”, then
press
4. Press
or
to select “Edit Name” or “New
Name”, then press
My Phone
68
If you select “Edit Name”, the list of Phonebook is
displayed for selecting the entry to which you wish
to add picture. Select the desired entry, then press
. The detailed screen of the selected entry is
displayed with the picture added to it.
If you select “New Name”, a new Phonebook entry
is displayed with the picture added to it.
Editing Pictures
Retouching Pictures
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
retouch, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Edit Picture”, then press
4. Press
5. Press
or
to select “Retouch”, then press
or
to select the retouching option you
wish to use, then press
The selected option is confirmed on the display.
6. Press
69
My Phone
Note
• Pictures in jpeg format and larger than QVGA in size
(240 [W] × 320 [H]) can only be retouched.
Adding Frame to Pictures
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
add frame to, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Edit Picture”, then press
4. Press
or
to select “Add Frame”, then press
5. Press
or
to select the frame pattern you wish
to use, then press
You can select a frame from 10 patterns.
The selected frame is confirmed on the display.
6. Press
Note
• No frames can be added to pictures in jpeg format
and larger than QVGA in size (240 [W] × 320 [H]).
Adding Stamp to Pictures
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
add stamp to, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Edit Picture”, then press
Rotating Pictures
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
rotate, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Edit Picture”, then press
4. Press
4. Press
or
to select “Add Stamp”, then press
5. Press
or
to select the stamp pattern you wish
to use, then press
You can select a stamp from 10 patterns.
Note
• No stamps can be added to pictures in jpeg format
and larger than QVGA in size (240 [W] × 320 [H]).
or
to select “Rotate”, then press
The picture is rotated 90º anticlockwise.
Press A to rotate 90º clockwise.
5. Press
Note
• Rotating pictures in jpeg format and larger than
QVGA in size (240 [W] × 320 [H]) can not be
performed.
Downloading Picture File (M 2-2-2)
1. Perform steps 1 to 3 in “Using as Wallpaper” on
page 68.
2. Press
or
to select “Download More”, then
press
The picture file download site is displayed.
My Phone
70
Viewing Pictures
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
view, then press
The selected picture is displayed.
3. Once you have confirmed the picture, press C
[Back] to return to the list.
Changing the File Name
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
change, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Rename”, then press
4. Enter a new file name.
To correct the last character, press C [Clear]
briefly.
Press and hold C [Clear] to clear all characters.
5. Press
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (full-stop).
71
My Phone
Adjusting the Size of the Picture
The pictures that are registered in the Saved Pictures
can be adjusted for use as main or external display as
well as incoming call, alarm or power on/off display.
When the picture size is modified, the data size is
updated.
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
adjust, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Adjust Size”, then press
4. Press
or
to select “Main Display”, “External
Display”, “Power On/Off”, “Incoming” or
“Alarm”, then press
To cancel registration, press C [Back] in step 4.
Note
• “Adjust Size” may not be available depending on the
picture original and copyright issued.
Sending Messages
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
send, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Send Message”, then
press
4. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 99.
Note
• Pictures with a red icon cannot be sent attached to a
message.
Deleting Pictures
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
delete, then press A [Options].
The Options Menu is displayed.
3. Press
4. Press
or
to select “Delete”, then press
or
to select “One Data” or “All Data”,
then press
5. Press A [Yes].
To cancel deletion, Press C [No] in step 5.
Checking the Information of the Pictures
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
check, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Property”, then press
The detailed information screen is displayed.
4. Press
or
to scroll through the screen.
5. When you have finished, press C [Back].
The screen returns to the list.
My Phone
72
My Movies (M 2-3)
Movies that are recorded by a movie camera or movies
that are downloaded from mobile Internet sites can be
managed.
Downloading Movie Files (M 2-3-2)
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
3. Press
or
to select “My Movies”, then press
4. Press
or
to select “Download More”, then
press
The movie file download site is displayed.
73
My Phone
Playing Back Movie Files
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
3. Press
or
to select “My Movies”, then press
4. Press
or
to select “Saved Movies”, then
press
The list of Saved Movies is displayed.
5. Press
or
to select the movie you wish to play
back, then press
6. Press
The selected movie is played back.
To pause playing back, press
To resume playing back, press
again.
To stop playing back, press C [Back].
To enlarge movie, press A [×2].
Checking the Information of the Movie Files
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
check, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Property”, then press
The detailed information screen is displayed.
4. Press
or
to scroll through the screen.
5. When you have finished, press C [Back].
The screen returns to the list.
Changing the File Name
1. Perform steps 1 to 4 in “Playing Back Movie Files”
on page 73.
2. Press
or
to select the file name you wish to
change, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Rename”, then press
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (full-stop).
Sending Messages
1. Perform steps 1 to 4 in “Playing Back Movie Files”
on page 73.
or
to select the file you wish to send,
then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Send Message”, then
press
2. Press
4. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 99.
4. Enter a new file name.
To delete the last character, press C [Clear] briefly.
Press and hold C [Clear] to clear all characters.
5. Press
My Phone
74
Deleting Movie files
1. Perform steps 1 to 4 in “Playing Back Movie Files”
on page 73.
2. Press
or
to select the file you wish to delete,
then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Delete”, then press
4. Press
or
to select “One Data” or “All Data”,
then press
5. Press A [Yes].
To cancel deletion, press C [No] in step 5.
My Sounds (M 2-4)
The ring tones instead created by Melody Editor and the
WAVE data recorded by Voice Memo are managed in
the Saved Sounds. Default ring tones are not contained.
: Sound file in SMAF format
: Original ring tone (composed in Melody Editor)
: Sound file in Standard MIDI format
: Sound file in i Melody format
: Sound file in WAVE format
#:
Sound file in AMR format
Note
• SMAF (Synthetic music Mobile Application Format)
is a format of music data for mobile phones.
Downloading Sound Files (M 2-4-2)
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
3. Press
or
to select “My Sounds”, then press
4. Press
or
to select “Download
More”, then press
The sound file download site is displayed.
75
My Phone
Playing Back Sounds
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
3. Press
or
to select “My Sounds”, then press
4. Press
or
to select “Saved Sounds”, then
press
The Saved Sounds is displayed.
5. Press
or
to select the sound you wish to play
back, then press
The selected sound is played.
To stop playing, press
Checking the Information of the Sound Files
1. Perform steps 1 to 4 in “Using as Wallpaper” on
page 68.
2. Press
or
to select the file name you wish to
check, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Property”, then press
The detailed information screen is displayed.
4. Press
or
to scroll through the screen.
5. When you have finished, press C [Back].
The screen returns to the list.
Changing the File Name
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 76.
2. Press
or
to select the file name you wish to
change, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Rename”, then press
4. Enter a new file name.
To delete the last character, press C [Clear] briefly.
Press and hold C [Clear] to clear all characters.
5. Press
My Phone
76
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (full-stop).
Tip
• When “Edit Data” is displayed in the menu in step 2,
you are able to edit the sound (p. 92). Once you have
completed editing the newly saved file overwrites the
old file. This new file then becomes the original ring
tone.
Setting the Tone and Strength
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 76.
2. Press
or
to select the file name you wish to
edit, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Tone Set” or “Strength
Set”, then press
For full details, see pages 90 to 92.
Note
• If “Tone Set” and “Strength Set” are not displayed
in the menu in step 2, you cannot change the settings.
77
My Phone
Sending Messages
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 76.
2. Press
or
to select the file name you wish to
send, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Send Message”, then
press
If you select your original ring tone in step 2;
4. Press
or
to select the file format “SMAF”,
“MIDI” or “i Melody”, then press
5. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 99.
Note
• Sounds with a red icon cannot be sent attached to a
message.
• Only the first part of the data will be converted if you
select “i Melody” in step 4.
Deleting Sounds
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 76.
2. Press
or
to select the file name you wish to
delete, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Delete”, then press
4. Press
or
to select “One Data” or “All Data”,
then press
5. press A [Yes].
To cancel deletion, press C [No] in step 5.
My Bookmarks (M 2-5)
You can store desired (or frequently used) pages
(addresses) in My Bookmarks. It can save your time in
accessing WAP pages sites. For further details,
see “Vodafone live!” on page 117.
Adding a Bookmark
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
3. Press
or
to select “My Bookmarks”, then
press
The list of My Bookmarks is displayed.
4. Press A [Options] to display the Options Menu.
When you add a bookmark for the first time, press
A [Add] instead, then skip to step 6.
5. Press
or
to select “Add”, then press
6. Enter the bookmark title, then press
7. Enter the URL address, then press
My Phone
78
Accessing Bookmarked Pages
1. Perform steps 1 to 3 in “Adding a Bookmark”.
2. Press
or
to select a bookmarked page you
wish to access, then press
Editing Bookmarks
1. Perform steps 1 to 3 in “Adding a Bookmark” on
page 78.
2. Press
or
to select the desired bookmark to
edit, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Edit”, then press
4. Edit the bookmark title.
For details on entering characters, see “Entering
Characters” on page 29.
5. Press
6. Edit the URL address.
7. Press
79
My Phone
Deleting Bookmarks
1. Perform steps 1 to 3 in “Adding a Bookmark” on
page 78.
2. Press
or
to select the desired bookmark to
delete, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Delete”, then press
4. Press A [Yes].
The selected bookmark has been deleted.
To cancel deletion, press C [No] in step 4, then
press
My Text Templates (M 2-6)
You can register up to 20 text templates for use in SMS
and MMS.
You can input messages or others more easily by
registering frequently used text.
128 characters may be registered in any text template.
Adding Phrases to My Text Templates
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
Editing Text Templates
1. Perform steps 1 to 3 in “Adding Phrases to My Text
Templates”.
2. Press
or
to select the number you wish to
edit, then press
3. Enter new text.
To correct the last character, press C [Clear]
briefly.
Press and hold C [Clear] to clear all characters.
4. Press
3. Press
or
to select “My Text Templates”,
then press
The list of My Text Templates is displayed.
4. Press
or
to select the number you wish to
register, then press
5. Enter the text, then press
For details on entering characters, see “Entering
Characters” on page 29.
My Phone
80
Viewing Text Templates
1. Perform steps 1 to 3 in “Adding Phrases to My Text
Templates” on page 80.
2. Press
or
to select the number you wish to
view, then press A [Options].
The Options Menu is displayed.
3. Press
or
to select “Confirm”, then press
The selected text template is displayed.
4. After confirmation, press C [Back] to return to
template list.
Deleting Text Templates
1. Perform steps 1 to 3 in “Adding Phrases to My Text
Templates” on page 80.
2. Press
or
to select the text template you wish
to delete, then press A [Options].
3. Press
or
to select “Delete”, then press
4. Press A [Yes].
The selected text template is deleted.
To cancel deletion, press C [No] in step 4.
81
My Phone
Memory Status (M 2-7)
This function helps you to check the memory status of
the My Phone.
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”,
then press
3. Press
press
or
to select “Memory Status”, then
Info-Service (M 2-8)
You can refer to the information on the SIM. Contact
your service provider for further details.
My Phone
82
Fun & Games (M 3)
Java™
Java™ Wallpaper (M3-1-2)
For the stand-by screen, Java™ applications are
provided.
1. Press
to display the Main Menu.
2. Press
or
to select “Fun & Games”,
then press
3. Press
4. Press
press
5. Press
6. Press
or
to select “Java™”, then press
or
to select “Java™ Wallpaper”, then
or
to select “On/Off”, then press
or
to select “On” to set Java™
Wallpaper on or “Off” to set Java™ Wallpaper off,
then press
7. If you select “On”, press
or
desired application, then press
to select the
Note
• In the list that appears in step 7, only the available
wallpaper is displayed.
83
Fun & Games
Online Setting
You can set the Java™ application for the stand-by
screen to connect to the network and receive any Java™
services.
1. Perform steps 1 to 4 in “Java™ Wallpaper”.
2. Press
or
to select “Online Setting”, then
press
3. Press
or
to select “On” or “Off”, then press
Resume Time
You can set the time until the Java™ Wallpaper works
for the stand-by screen.
1. Perform steps 1 to 4 in “Java™ Wallpaper”.
2. Press
or
to select “Resume Time”, then
press
When you select “On” in step 6 in “Java™ Wallpaper”:
3. Enter the resume time in two digits (1 to 10 seconds)
using the digit keys, then press
Settings (M 3-1-3)
Operation Priority
You can set the method of incoming phone calls and
alarm whilst a Java™ application is operated.
1. Press
2. Press
to display the Main Menu.
or
to select “Fun & Games”,
then press
3. Press
4. Press
5. Press
press
6. Press
or
to select “Java™”, then press
or
to select “Settings”, then press
or
to select “Operation Priority”, then
or
to select the option you wish to set,
then press
The options available are:
• “Incoming Call”
• “Alarm”
7. Press
or
to select methods, then press
• “Priority”:
The Java™ application is suspended automatically,
and you can receive the call or alarm will sound.
After finishing the call or alarm, the suspend icon
( ) is displayed and you will know there is a
suspended Java™ application.
• “Notice”:
The marquee (character scrolls) is displayed on the
first line on the screen whilst the Java™ application
continues. If you press D, the Java™ application is
suspended, and you can receive the call. After
finishing the call, the suspend icon ( ) is displayed
and you will know there is a suspended Java™
application.
Volume
You can set the sound volume of the Java™ application
such as sound effect to one of the five levels or silent.
When “Ringer Volume” (p. 58) is set to “Silent”, the set
up has a priority.
1. Perform steps 1 to 4 in “Operation Priority”.
2. Press
or
to select “Sound Volume”,
then press
The current volume level is displayed.
3. Press
to increase the volume or press
to
decrease the volume and then press
Fun & Games
84
Backlight
You can select the method of backlight during the
operation of the Java™ application from the following
three types:
• “On”:
Lit whilst the Java™
application is operated.
• “Off”:
Unlit whilst the Java™
application is operated
even if a key is pressed.
• “Normal Settings”:Works with the main backlight
setting. (p. 122)
1. Perform steps 1 to 4 in “Operation Priority” on
page 84.
2. Press
or
to select “Backlight”, then press
3. Press
4. Press
or
to select “On/Off”, then press
or
to select “On”, “Off” or “Normal
Settings”, then press
To Set the Blinking Operation
You can set whether the blinking operation, which is
embedded in Java™ application, is enabled.
1. Perform steps 1 and 2 in “Backlight”.
2. Press
or
to select “Blink”, then press
3. Press
or
to select “On” or “Off”, then press
Vibration
When vibrator is set in the Java™ application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the Java™
application, you can operate the vibrator set in the
SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a format of music data for mobile phones.
1. Perform steps 1 to 4 in “Operation Priority” on
page 84.
2. Press
or
to select “Vibration”, then press
3. Press
or
to select “Enable”, “Disable” or
“Link to Sound”, then press
When you set “Link to Sound”, the Java™
application is synchronised with the vibrator.
85
Fun & Games
Online Confirmaion
You can adjust the display settings of the confirmation
screen when a Java™ application attempts to connect to
the network.
1. Perform steps 1 to 4 in “Operation Priority” on
page 84.
2. Press
or
to select “Online Confirmation”,
then press
3. Press
or
to select “On”, then press
To cancel confirmation, select “Off”, then press
Java™ Reset
To reset all items in Settings menu
1. Perform steps 1 to 4 in “Operation Priority” on
page 84.
2. Press
or
to select “Java™ Reset”, then press
3. Enter your handset code, then press
If you enter a wrong handset code, the screen will
return to step 4 in “Operation Priority” on page 84.
4. Select “Settings Reset”, then press
5. Press A [Yes].
To cancel resetting, select C [No] in step 5.
To clear all Java™ applications
All Java™ applications stored in Saved Games are
cleared. The preloaded Java™ application cannot be
deleted.
1. Perform steps 1 to 4 in “Operation Priority” on
page 84.
2. Press
or
to select “Java™ Reset”, then press
3. Enter your handset code, then press
If you enter a wrong handset code, the screen will
return to step 4 in “Operation Priority” on page 84.
4. Press
or
to select “All Clear”, then press
5. Press A [Yes].
All Java™ applications are cleared.
To cancel clearing, press C [No] in step 5.
Java™ Information (M 3-1-4)
The information about the license of Java™ can be
displayed.
Download More (M 3-1-5)
See “Download” on page 66 for instructions.
All items in Settings menu will be reset.
Fun & Games
86
Melody Editor (M 3-2)
You can create an original ring tone by yourself, or you
can send a melody attached to an MMS.
You can input up to 190 tones × 16 chords, or 380 tones
× 8 chords per melody.
The original ring tone is registered in the Saved Sounds.
Creating Your Original Ring Tone (M 3-2-1)
1. Press
to display the Main Menu.
2. Press
or
to select “Fun & Games”,
then press
3. Press
or
to select “Melody Editor”,
then press
4. Press
or
to select “Create New”, then press
5. Enter the title.
Up to 24 characters can be entered.
For details on entering characters, see “Entering
Characters” on page 29.
6. Press
7. Press
or
to select a tempo, then press
The music tempo is described below.
• “Allegro (Fast)”:
150
87
Fun & Games
• “Moderato (Normal)”:
• “Andante (Slow)”:
• “Adagio (Very Slow)”:
125
107
94
Tempo is defined by the number of crotchets (
played per minute.
8. Press
or
to select “8 Chords” or “16
Chords”, then press
9. Specify the musical scale and rest using the digit
keys.
For details on specifying the sound level and rest,
see “Specify the Musical Scale and Rest” on
page 88.
10. Specify the types of musical notes or rest using P
or R keys.
For details on specifying the musical notes and rest,
“Specifying the Types of Notes and Rests” on
page 89.
11. Press
key after inputting one note.
Input the next note after the cursor moves to the
right.
12. Repeat steps 9 to 11 to input notes.
When you press
during input, the melody that
you have entered is played back.
When you press A [Options] and select “Play
before Cursor” whilst entering notes, the melody,
that is displayed on the screen, is played back up to
the cursor position.
When you press A [Options] and select “Select
Chord”, you can select another chord. Repeat steps
9 to 11 to input notes for the new chord.
13. When you finish inputting, press A [Options] to
display the Options Menu.
14. Press
15. Press
or
to select “Save”, then press
or
to select “Save to My Phone”, then
press
Your original ring tone is registered in the Saved
Sounds.
Note
• If the capacity or memory in the Saved Sounds
becomes insufficient, the message of “Maximum
Capacity : 100 Not registered” or “Not registered.
Memory Full” is displayed respectively. At that time,
the display returns to the screen of step 15. Try again
after deleting unnecessary data (p. 78).
Specify the Musical Scale and Rest
Using the key shown below, specify the musical scale
and rest.
Do
Re
Mi
Fa
Sol
La
Ti
Rest
GHIJ K LM Q
When you press the key shown above once, a crotchet
is specified in the middle scale (no mark).
When you press the same key repeatedly, the note will
shift cycle through the available octave ranges.
When you press
or
whilst a note is selected, the
note will raise one semitone higher or lower.
When entering rest: Crotchet rest is entered.
Fun & Games
88
Specifying the Types of Notes and Rests
Specify notes and rests by pressing P or R
repeatedly.
Crotchet (Crotchet rest)
Quaver (Quaver rest)
Semiquaver (Semiquaver rest)
Semibreve (Semibreve rest)
Minim (Minim rest)
When you make a dotted note or triplet, press O after
selecting the target note.
89
Fun & Games
Note
• You cannot make a dotted semiquaver (semiquaver
rest) or a dotted semibreve (semibreve rest).
• Three continuous notes are required for triplet.
To specify a tie, press N after selecting the target
notes.
An underscore (_) is displayed next to the note, and the
note is tied with the next one.
To enter the next note, press
and move the cursor to
the right. Then, repeat the operation on the previous
page.
If the cursor is positioned next to a note, you can repeat
the note immediately left of the cursor when
or
is pressed.
Set the Tone
The phone can play notes using different instruments.
1. Perform steps 1 to 13 in “Creating Your Original
Ring Tone” on page 87.
2. Press
or
to select “Tone Set”, then press
3. Press
4. Press
or
You can select from the following 128 tones.
Category
to select a category of the tone.
or
to select a tone.
When you press A [Options] and select “Play
Current Chord”, the melody entered is played back
in the selected tone.
When you press A [Options] and select “Confirm
Tones”, the syllable names are played back in the
selected tone.
5. Press
Now you can create a melody.
Pianos
Organs
Basses
Tone
Category
Piano
Bright Piano
E. Grand Piano
Honky-Tonk
Electric Piano
Chimes
Electric Piano
Harpsichord
Clavi
Drawbar Organ
Perc. Organ
Rock Organ
Church Organ
Guitars
Reed Organ
Accordion
Harmonica
Tango Accordion
Acoustic Bass
Finger Bass
Pick Bass
Fretless Bass
Slap Bass 1
Slap Bass 2
Synth Bass 1
Synth Bass 2
Strings 1
Tone
Celesta
Glockenspiel
Music Box
Vibraphone
Marimba
Xylophone
Tubular Bells
Dulcimer
Nylon Guitar
Steel Guitar
Jazz Guitar
Clean Guitar
Muted Guitar
Overdriven Gtr.
Distortion Gtr.
Gtr. Harmonics
Violin
Viola
Cello
Contrabass
Tremolo
Strings
Pizz. Strings
Harp
Timpani
Fun & Games
90
Category
Strings 2
Reeds
Synth
Leads
91
Tone
Str. Ensemble
Str. Ensemble
Synth Strings 1
Synth Strings 2
Choir Aahs
Voice Oohs
Synth Voice
Orchestra Hit
Soprano Sax
Alto Sax
Tenor Sax
Baritone Sax
Oboe
English Horn
Bassoon
Clarinet
Square Lead
Sawtooth Lead
Calliope Lead
Chiff Lead
Charang Lead
Voice Lead
Fifth Lead
Bass & Lead
Fun & Games
Category
Brasses
Flutes/
Pipes
Synth
Pads
Tone
Trumpet
Trombone
Tuba
Muted Trumpet
French Horn
Brass Section
Synth Brass 1
Synth Brass 2
Piccolo
Flute
Recorder
Pan Flute
Blown Bottle
Shakuhachi
Whistle
Ocarina
New Age Pad
Warm Pad
Polysynth Pad
Choir Pad
Bowed Pad
Metallic Pad
Halo Pad
Sweep Pad
Category
Synth
Effects
Percussions
Original
Tone
Category
Rain
Soundtrack
Crystal
Atmosphere
Ethnics
Brightness
Goblins
Echoes
Science Fiction
Tinkle Bell
Agogo
Steel Drums
Woodblock
Taiko Drums
Effects
Melodic Tom
Synth Drum
Reverse Cymbal
Original 1 (Piano)*
Original 2 (Glockenspiel)*
Original 3 (Reed Organ)*
Original 4 (Nylon Guitar)*
Original 5 (Violin)*
Tone
Sitar
Banjo
Shamisen
Koto
Kalimba
Bagpipe
Fiddle
Shanai
Gtr. Fret Noise
Breath Noise
Seashore
Bird Tweet
Telephone
Ring
Helicopter
Applause
Gunshot
* The default setting tone.
To create your original tone, see “Creating Your Original
Tone” on page 96.
Setting the Strength of the Original Ring Tone
The strength of the original ring tone can be set in 3
levels for each melody.
When you purchase this phone, the strength of the
original ring tone is set to “Loud”.
1. Perform steps 1 to 13 in “Creating Your Original
Ring Tone” on page 87.
2. Press
or
to select “Strength Set”, then press
3. Press
or
to select a strength of the tone, then
press
When A [Play] is pressed, the original ring tone
entered is played back in the selected strength of the
tone.
4. Press
Now you can create an original ring tone.
Deleting an Original Ring Tone
Perform steps 1 to 4 in “Deleting Sounds” on page 78.
Editing Original Ring Tones
1. Perform steps 1 to 3 in “Creating Your Original
Ring Tone” on page 87.
2. Press
or
to select “Existing Melodies”, then
press
3. Press
or
to select an original ring tone you
wish to edit, then press A [Options].
The Options Menu is displayed.
4. Press
or
to select “Edit Data”, then press
5. Edit the title and press
6. Press
or
to select a tempo, then press
7. Press
or
to select the number of chords, then
press
8. Press
or
to select a note you wish to change,
then edit notes.
When you add notes, enter the note correctly on the
cursor.
Fun & Games
92
To delete a note, press C [Clear] briefly.
Press and hold C [Clear] to clear all tones.
9. When you finish editing, press A [Options] to
display the Options Menu.
10. Press
11. Press
press
or
or
to select “Save”, then press
to select “Save to My Phone”, then
12. Press
or
to select “Overwrite”, then press
The original ring tone is changed.
If you select “New”, the melody before the
correction is not modified. The original ring tone is
registered as a new original ring tone.
Note
• When the number of chords is modified in step 7, the
confirmation screen may be displayed. When you
press A [Yes], a section of the melody may be
deleted.
• When you are going to add notes in step 8, you cannot
add any notes if you have already entered 380 notes
(for 8 chords melodies) or 190 notes (for 16 chords
melodies).
93
Fun & Games
Tip
• To delete the continuous melody, press A [Options]
and then press
after selecting “Delete after
Cursor” or “Delete before Cursor”. You can delete
the melody after the cursor or before the Cursor.
Copying and Pasting Notes
You can copy and move a part of a melody to another
position.
Only original ring tones or editable melodies can be
copied or moved.
1. Perform steps 1 to 7 in “Editing Original Ring
Tones” on page 92.
2. Press A [Options] to display the Options Menu.
3. Press
press
or
to select “Copy” or “Cut”, then
4. Move the cursor to the first note to be copied or to
be cut and press
5. Move the cursor to the last note to highlight the area
Tone Editor (M 3-3)
and press
The highlighted area will be saved temporarily in
the memory. If you select “Cut” in step 3, the
highlighted area will be cut.
6. Press A [Options] to display the Options Menu.
You can make a tone and use it for the original ring
tone.
Up to five types of tones can be registered respectively
for 8 chords and 16 chords.
7. Press
or
to select “Paste”, then press
8. Move the cursor to the point you wish to paste the
notes, then press
Saved notes are pasted.
FM Sound Source
Various types of tones can be composed by combining
the functions that generate one sine wave called an
“Operator”. The combination of the operator is called
an algorithm.
The operator acts as the modulator (modulating part) or
the carrier (modulated part) depending on the
algorithm.
• In each operator, various parameters such as multiple
or envelope can be set.
Fun & Games
94
• By setting the feedback to the specified operator,
wider tone ranges can be created.
Setting an Algorithm
Set the combination of the operator.
Select from 4 types of combinations in 8 chords, and 2
types in 16 chords.
Setting the Operator
The meaning and content of the parameter that can be
set to the operator is described below.
Parameter
Multiple
(13 levels)
8 Chords
Algorithm3
Algorithm4
Algorithm5
Algorithm1
Algorithm2
(Green number): The modulator (modulating part)
(White number): The carrier (modulated part)
95
Fun & Games
Envelope
(Continuous/Decay)
This sets continuous same note or fade-out.
Sustain
(On/Off)
This sets a note to be sustained after completing the note. If you want to have a note
with reverberation, set this function on.
Algorithm6
16 Chords
Meaning
When the value of the carrier is large, the
sound becomes high. You can set various
types of notes by changing the values of the
modulator.
Key Scale
Rate
(2 levels)
Key Scale
Level
(4 levels)
Total Level
(64 levels)
Set the function to “2” if you want to a short
note.
This function sets the rate of reducing the
volume as a note becomes higher.
In the carrier, the volume becomes large as
this level becomes higher.
In the modulator, the melody becomes
brighter as this level becomes higher. The
melody becomes softer as this level
becomes smaller.
Parameter
Attack Rate
(15 levels)
Decay Rate
(16 levels)
Sustain
Level
(16 levels)
Release
Rate
(16 levels)
Wave
Shape
(8 types)
Vibrato
(4 levels/
Off)
Meaning
This sets the time from the beginning of the
sound to the maximum volume.
This sets the time from the maximum volume
to the volume of the sustain level.
In sustaining note, this displays the volume
of the sound that continues to produce. In
fading-out note, this displays the volume
when the note starts fading-out.
In sustaining note, this displays the sustaining time from note completion to no sound.
In fading-out note, this displays the time from
starting fade-out to no sound.
Select the basic wave type from eight types.
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Type 7
Type 8
Parameter
Tremolo
(4 levels/
Off)
Feedback
(8 levels)
Meaning
Set the tremolo. If the tremolo is used, select
from 4 levels.
Set the level of modulation in the modulator
feedback for Operator 1.
Set the Effect Frequency
Define the frequency of the vibrato or tremolo.
The frequency becomes faster as the figure increases.
Creating Your Original Tone
1. Press
to display the Main Menu.
2. Press
or
to select “Fun & Games”,
then press
3. Press
or
to select “Tone Editor”, then press
4. Press
Set the vibrato. If the vibrato is used, select
from 4 levels.
or
to select “For 8 Chords” or “For 16
Chords”, then press
5. Press
or
to select the number you wish to
register, then press
Fun & Games
96
6. Press
or
to select “Rename”, then press
7. Enter the title.
15. Press
or
to select a base tone, then press
When A [Play] is pressed, the syllable names are
played back in the selected tone.
12. Press
18. Press
Up to 16 characters can be entered.
For details on entering characters, see “Entering
Characters” on page 29.
8. Press
9. Press
press
10. Press
11. Press
13. Press
press
or
to select “Base Tone Set”, then
or
to select a category of the tone.
or
to select “Details Editor”, then
14. Press
or
to select “Algorithm n” (n: 1, 2, 3,
4, 5 or 6), then press
97
Fun & Games
or
to select an algorithm you wish to
set, then press
If you do not wish to change the operator, skip to
step 20.
16. Press
or
to select an operator you wish to
change, then press
The basic note parameter is set in advance.
17. Press
or
to select a parameter you wish to
change.
or
to change the content of the
parameter.
For details of parameter, see pages 95 to 96.
When you press
, the syllable names are played
back in the selected content of the parameter.
Repeat steps 17 and 18 to change another content of
the parameter.
19. Press A [Save].
If you do not wish to change the effect frequency,
skip to step 22.
20. Press
or
to select “Effect Frequency”, then
press
21. Press
or
to select the effect frequency you
wish to set, then press
22. Press A [Save].
23. Press A [Save].
Your original tone is registered.
Fun & Games
98
Messages (M 4)
Your phone allows you to send and receive short
messages, MMS and WAP mails.
MMS (Multimedia Messaging Service)
(M 4-1)
About MMS
MMS allows you to further personalise your messages
with pictures, movies, sounds and animations.
6. When you finish setting, press C [Back].
Creating a New MMS (M 4-1-1)
Note
• Some MMS functions may not always be available
depending on your network. Contact your network
operator for more information.
1.
2.
3.
4.
5.
6.
Setting up MMS (M 4-1-6)
1.
2.
3.
4.
99
Press A [
Press
or
] during stand-by.
to select “MMS”, then press
Press
to select “Settings”, then press
or
Select the desired item to set, then press
Messages
The items available are:
• Download Msg.
• Delivery Rep. Allow
• Anonymous Reject
• Auto Delete
• Sending Message default
5. Edit the each item.
Press A [
] during stand-by.
Select “MMS”, then press
Select “Compose”, then press
Select “Free Format”, then press
Enter your message, then press
Enter phone number or E-mail address of the
recipient, then press
If you wish to select the phone number or E-mail
address in the Phonebook, search for the desired
Phonebook entry.
Press
or A [Search] to search the number
by name or press
or
to search in alphabetical
order, then press
. For details on searching the
Phonebook entries, see “Finding a Name and
Number” on page 41.
7. Select “Send”, then press
The confirmation screen of file size is displayed.
8. Press A [Yes].
After the message has been sent, the message is
added to the Sent box.
Note
• This phone allows you to enter up to 256 characters
as a subject, and enter up to 10 addresses of the
recipients for sending MMS.
However, these may be limited depending on your
network. In this case, you may be failed to send MMS.
Contact your network operator for more information.
To Enter the Subject of the Message
1. Perform steps 1 to 6 in “Creating a New MMS” on
page 99.
2. Select “Subject”, then press
3. Enter the subject of your message, then press
Sending Greeting Cards
You can select and send a template message from the
Template List as your Greeting Cards message.
1. Perform steps 1 to 3 in “Creating a New MMS” on
page 99.
2. Select “Greeting Cards”, then press
3. Select a template you wish to send, then press
4. Perform steps 5 to 8 in “Creating a New MMS” on
page 99.
Messages
100
To Add Recipients
1. Perform steps 1 to 8 in “Creating a New MMS” on
page 99.
2. Press
or
to select “Add address”, then press
3. Select “To” to add recipients or “Cc” to send a copy
of this MMS to other recipients, then press
4. Select a desired number from the list, then press
5. Enter the phone number or E-mail address of the
other recipients, then press
6. Press C [Back] twice.
To Use the Text Template
1. Perform steps 1 to 4 in “Creating a New MMS” on
page 99.
2. Press A [Options] to display the Options Menu.
3. Press
press
or
to select “Insert Template”, then
4. Select the desired template from the list, then press
101
Messages
To Save a Message in the Drafts Box (M 4-1-5)
You can save a message in the Drafts box temporarily
and send it later, without sending it immediately.
1. Perform steps 1 to 6 in “Creating a New MMS” on
page 99.
2. Press
or
to select “Save”, then press
to
save the message in the Drafts box.
Note
• You can send it later following the instructions in
“Sending a Message in the Drafts Box” on page 103.
Turning the Slide Show Setting On or Off
1. Perform steps 1 to 4 in “Creating a New MMS” on
page 99.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Slide Show”, then press
or
to select “On” or “Off”, then press
4. Press
If You Select “On”
• You can create messages which have up to 3 slides.
Each slide can contain one picture, one sound file
and up to 512 characters of text (up to the message
total 100Kbyte limit).
• The slide options available are:
Add Slide:
To add a new slide.
Delete Slide: To delete the active slide.
Previous Slide: To navigate to the previous slide.
Next Slide:
To navigate to the next slide.
• EVA data cannot be attached as a slide data to a
message.
If You Select “Off”
• You can attach a maximum of 6 pictures or sounds
and up to 100 Kbyte.
• EVA data cannot be attached as a slide data to a
message.
Inserting Attached Data
You can send pictures and sounds saved in the Saved
Pictures or Saved Sounds attached to MMS.
1. Perform steps 1 to 4 in “Creating a New MMS” on
page 99.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Picture”, “Movie” or
“Sound”, then press
4. Select the file name you wish to attach, then press
The selected picture/movie/sound is attached.
5. Press
Messages
102
To Add Attached Data
1. Perform step 1 to 3 in “Inserting Attached Data” on
page 102.
The list of attached data is displayed.
2. Select the file name you wish to add, then press A
[Options].
3. Press
or
to select “Add Picture”, “Add
Movie” or “Add Sound”, then press
4. Perform steps 4 and 5 in “Inserting Attached Data”
on page 102.
To Delete Attached Data
1. Perform steps 1 to 3 in “Inserting Attached Data” on
page 102.
The list of attached data is displayed.
2. Select the file name you wish to delete, then press
A [Options].
3. Press
or
to select “Remove”, then press
4. Press A [Yes].
103
Messages
Sending a Message in the Drafts Box (M 4-1-3)
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 99.
2. Press
or
to select “Drafts”, then press
3. Select the desired message to send in the Drafts box,
then press A [Options].
The Options Menu is displayed.
4. Press
or
to select “Send”, then press
The confirmation screen of file size is displayed.
5. Press A [Yes].
The phone begins the sending process and the MMS
is sent.
Reading MMS (M 4-1-2)
Messages you receive are stored in the Inbox, and
outgoing messages are stored in the Drafts box until
you send them, after which they move to the Sent box.
Incoming Messages
The MMS indicator ( ) will appear when you are
receiving an incoming message.
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 99.
2. Press
or
to select “Inbox”, then press
Messages are marked with “ ” denote mails with
attachments.
3. Press
or
to select the desired message, then
press
The message is displayed.
4. Scroll the screen to read the message.
5. When you finish viewing, press A [Done].
To Check the Sender and Receiver Phone
Number or E-mail Address
1. Perform steps 1 to 2 in “Incoming Messages” on
page 104.
2. Press
or
to select the desired message, then
press A [Options] to display the Options Menu.
3. Press
or
to select “Details”, then press
The sender’s phone number or E-mail address, time
and date stamp, subject, attachment and size are
displayed.
Replying to a Message to the Sender from
Inbox
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 99.
2. Press
or
to select “Inbox”, then press
3. Press A [Options] to display the Options Menu.
4. Press
or
to select “Reply”, then press
Messages
104
5. Enter your message.
6.
7.
8.
9.
For details on entering characters, see “Entering
Characters” on page 29.
Press
The phone number or E-mail address of the
recipient is automatically filled in the sender’s
phone number or E-mail address.
Press
The subject field is automatically filled in with the
original subject preceded by “Re:”.
Select “Send”, then press
The confirmation screen of file size is displayed.
Press A [Yes].
Tip
• You can reply to a message to all addresses of
selected messages by selecting “Reply All” in step 4.
Forwarding a Message
1. Perform steps 1 to 3 in “Replying to a Message to
the Sender from Inbox” on page 104.
2. Press
or
to select “Forward”, then press
3. Enter phone number or E-mail address of the
recipient, then press
105
Messages
If you wish to select the phone number or E-mail
address in the Phonebook, search for the desired
Phonebook entry.
Press
or A [Search] to search the number
by name or press
or
to search in alphabetical
order, then press
. For details on searching the
Phonebook entries, see “Finding a Name and
Number” on page 41.
4. Select “Send”, then press
The confirmation screen of the file size is displayed.
5. Press A [Yes].
Note
• When the message with attached data is forwarded
the data is also sent. However, if there is any material
which the phone recognises as having copyright, it
will not be sent.
• “Subject” field is automatically filled in with the
original subject preceded by “Fw:”.
The original message and subject cannot be changed.
Modifying a Message
1. Perform steps 1 to 3 in “Replying to a Message to
the Sender from Inbox” on page 104.
2. Select “Edit”, then press
3. Modify the message.
4. Press
5. Select “Send”, then press
The confirmation screen of the file size is displayed.
6. Press A [Yes].
Note
• Messages cannot be edited if they contain particular
data such as Slide Show, XHTML, copyrights or
unknown format.
Retrieving MMS
When “ ” is in the Inbox, the following can be done.
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 99.
2. Press
or
to select “Inbox”, then press
3. Press
or
download.
to select a desired alert to
4. Press A [Options] to display the Options Menu.
5. Press
or
to select “Download”, then press
Storing the Phone Number or E-mail Address
of a Sender in the Phonebook
1. Perform steps 1 to 3 in “Replying to a Message to
the Sender from Inbox” on page 104.
2. Press
or
to select “Save to Phonebook”, then
press
For details on entering a name, see “Creating a New
Entry” on page 38.
Messages
106
Deleting Messages
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 99.
2. Press
or
to select “Inbox”, “Sent”, “Drafts”
or “Outbox”, then press
3. Select the message you wish to delete, then press A
[Options].
The Options Menu is displayed.
4. Press
or
to select “Delete”, then press
The confirmation screen is displayed.
5. Press
or
to select “One Message” or “All
Messages”, then press
6. Press A [Yes].
To cancel deletion, press C [No].
Note
• You cannot delete locked messages.
To Lock Message
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 99.
107
Messages
2. Press
press
or
to select “Inbox” or “Sent”, then
3. Select the message you wish to lock, then press A
[Options].
The Options Menu is displayed.
4. Press
or
to select “Lock/Unlock”, then press
Making a Call to the Sender of a Message
You can make a call to the sender of a message in Inbox
whose address (From) is the phone number.
1. Perform steps 1 and 2 in “Replying to a Message to
the Sender from Inbox” on page 104.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Call”, then press
SMS (Short Message Service)
(M 4-2)
About SMS
The Short Message Service (SMS) allows you to send
text messages of up to 1024 characters to other GSM
users.
Using SMS with Your Phone
Messages longer than 160 characters may be
composed. During sending, the messages will be split.
If the receiver has a suitable phone the messages will
recombine during reception, if not your message will
appear as a number of separate 152 characters
messages.
You can send or receive SMS even if you are talking on
the phone.
You can also use My Text Templates to help you
compose SMS.
Setting up SMS (M 4-2-6)
Before you can use SMS to send and receive messages,
you have to set up some personal and system
information.
To set up the Service Centre Address
] during stand-by to display the
Message menu.
2. Press
or
to select “SMS”, then press
1. Press A [
3. Press
or
to select “Settings”, then press
4. Select “Message Centre”, then press
5. Enter the centre number.
If you wish to enter a country code for a message to
an international number, press and hold P until a
“+” sign appears.
6. Press
Messages
108
Validity Period
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient.
During this period, the message service centre will
continually try to deliver the message to the recipient.
1. Perform steps 1 to 3 in “Setting up SMS”.
2. Press
or
to select “Message Lifetime”, then
press
3. Select the validity period, then press
Message Format
1. Perform steps 1 to 3 in “Setting up SMS”.
2. Press
or
to select “Message Format”, then
press
3. Select the message format, then press
Connection Type
1. Perform steps 1 to 3 in “Setting up SMS” on
page 108.
2. Press
or
to select “Connection Type”, then
press
3. Select the connection type, then press
3. Press
109
Messages
Optimisation
When set “On” (default), double-byte characters such
as European characters with an accent will be converted
into single-byte characters and sent.
When “Off”, double-byte characters will be sent as
displayed.
Please note that you may be charged double for doublebyte characters sent in an SMS when Optimisation is set
“Off”.
1. Perform steps 1 to 3 in “Setting up SMS” on page
108.
2. Press
or
to select “Optimisation”, then press
or
to select “On” or “Off”, then press
Creating a New SMS (M 4-2-1)
1. Press A [
] during stand-by.
2. Press
or
to select “SMS”, then press
3. Select “Compose”, then press
4. Enter your message.
3. If you wish to select the SMS phone number in the
For details on entering characters, see “Entering
Characters” on page 29.
5. Press
To Use the Text Template
1. Perform steps 1 to 3 in “Creating a New SMS”.
2. Press A [Options] to display the Options Menu.
3. Press
press
or
to select “Insert Template”, then
Phonebook, search for the desired Phonebook entry.
Press A [Search] to search the number
by name or press
or
to search in alphabetical
order, then press
. For details on searching the
Phonebook entries, see “Finding a Name and
Number” on page 41.
4. Press
or
to select “Send”, then press
The confirmation screen is displayed.
5. Press A [Yes].
4. Select the desired template from the list, then press
To Save the Message in the Draftbox
1. Perform steps 1 to 5 in “Creating a New SMS”.
2. Enter the SMS phone number of the recipient, then
press
3. Press
Sending a Message (M 4-2-3)
1. Perform steps 1 to 5 in “Creating a New SMS”.
2. Enter the SMS phone number of the recipient, then
press
or
to select “Save”, then press
The phone begins the sending process and the SMS
is sent. After the message has been sent, the
message is added to the Outbox.
To Add Recipients
1. Perform steps 1 to 3 in “Sending a Message” on
page 110.
2. Press
or
to select “Add address”, then press
Messages
110
3. Select an item number to add recipients phone
number, then press
4. Enter the phone number to add, then press
Follow the procedure from step 4 in “Sending a
Message” on page 110.
Reading SMS (M 4-2-2)
Incoming Messages
The SMS indicator ( ) will appear when an incoming
message arrives.
1. When you receive a SMS, press
during standby.
2. Press
or
to select the desired message.
The sender’s phone number and a part of the
message are displayed. When the sender’s phone
number is stored in the Phonebook, the sender’s
name is displayed instead of the phone number.
Messages are marked with “ ” denote unread
messages. If the Inbox, Outbox or Draftbox is full,
“ ” flashes. Delete unnecessary messages.
3. Press
4. Scroll the screen to read the message.
5. When you have finished viewing, press F.
111
Messages
Replying to the Sender
1. Perform steps 1 to 3 in “Reading SMS”.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Reply”, then press
4. Enter your message.
For details on entering characters, see “Entering
Characters” on page 29.
5. Press
Follow the procedure from step 2 in “Sending a
Message” on page 110.
Calling the Message Sender
1. Perform steps 1 to 3 “Reading SMS”.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Call Sender”, then press
Forwarding a Message
1. Perform steps 1 to 3 in “Reading SMS”.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Forward”, then press
4. Enter the SMS phone number of the recipient, then
press
For details on searching the Phonebook entries, see
“Finding a Name and Number” on page 41.
5. Press
or
to select “Send”, then press
The confirmation screen is displayed.
6. Press A [Yes].
The phone begins the sending process and the SMS
is sent.
Modifying a Message
1. Perform steps 1 and 2 in “Creating a New SMS” on
page 110.
2. Press
or
to select “Outbox” or “Draftbox”,
then press
Deleting Messages
1. Perform steps 1 and 2 in “Creating a New SMS” on
page 110.
2. Press
or
to select “Inbox”, “Outbox” or
“Draftbox”, then press
3. Select the message you wish to delete, then press
4. Press A [Options] to display the Options Menu.
5. Press
or
to select “Delete”, then press
6. Press A [Yes] to select “Yes”, then press
The selected message is deleted.
To cancel deletion, press C [No].
3. Select the desired message to modify, then press
4. Press A [Options] to display the Options Menu.
5. Select “Edit”, then press
6. Modify the message, then press
Follow the procedure from step 2 in “Sending a
Message” on page 110.
Messages
112
Extracting Phone Numbers from the Received
Messages and making a call
You can make a call using a telephone number
embedded in the received SMS message.
1. Perform steps 1 and 2 in “Reading SMS” on
page 111.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Extract Numbers”, then
press
Any kinds of numbers are listed.
4. Press
or
to select the telephone number,
then press
5. To make a call, press D.
To save this telephone number in the phonebook,
press A [Save].
For details on entering a name, see “Creating a New
Entry” on page 38.
113
Messages
Tip
• Selecting “Save to phonebook” in step 3 instead
allows you to go to the phone number entry prompt
with the sender’s number entered.
For details on entering a name, see “Creating a New
Entry” on page 38.
Cell Broadcast (M 4-3)
You can receive Cell Broadcast messages or general
messages like weather reports, traffic reports, etc.
broadcast to all subscribers in a certain network area.
This function may not be available on all mobile phone
networks. Contact your network operator for more
information.
Enabling/Disabling Cell Broadcast (M 4-3-1)
1. Press A [
2. Press
or
press
] during stand-by.
to select “Cell Broadcast”, then
3. Press
or
to select “On/Off”, then press
4. Select “On” to set Cell Broadcast on or “Off” to set
it off, then press
Reading Cell Broadcast Messages (M 4-3-2)
1. When you receive a Cell Broadcast message, press
2. Scroll the screen to read the message.
3. When you finish viewing, press F.
Subscribing to Cell Broadcasts (M 4-3-3)
Select the page of the cell broadcast message that you
want.
1. Press A [
2. Press
or
press
3. Press
4. Press
press
6. Press
or
to select “Settings”, then press
or
to select “Set Info Subjects”, then
or
to select “Create Subject”, then
5. Press
press
] during stand-by.
to select “Cell Broadcast”, then
to add the channel.
7. Enter the appropriate channel code obtained from
your service provider, and a title for the channel.
Messages
114
Setting Languages
Allows you to select your preferred language for the
cell broadcast message display.
Cell Information (M 4-4)
The Cell Information is the message information that
operators sent to subscribers in certain areas.
When you receive Cell Information, the message will
be displayed on the stand-by screen.
Note
• This function may not be available on all mobile
phone networks. Contact your network operator for
more information.
Enabling/Disabling Cell Information
1. Press A [
2. Press
or
3. Press
or
] during stand-by.
to select “Cell Info”, then press
to select “On” or “Off”, then press
Note
• If Cell Information is set to “On”, the Stand-by Time
will decrease.
115
Messages
Messages
116
Vodafone live! (M 6)
Your phone contains a WAP browser used for surfing
on the Mobile Internet, where you can get a lot of useful
information. Normally, pages are designed for a mobile
phone.
Your phone is already setup to Vodafone site for WAP/
MMS Settings.
To Exit the WAP Browser
1. Press F to exit the browser.
Navigating a WAP Page
•
Move the highlights around in the screen.
• A/
•
•
•
Used to select an action displayed in the
lower left corner of the screen.
C:
Used to select an action displayed in the
lower right corner of the screen.
Q (press and hold):
Used to start the Go to URL.
G to O (press and hold):
Used to start the Bookmark (WAP).
F:
Exit (short press)
Turn off the phone. (press and hold)
Viewing the WAP Browser
•
1. Press E during stand-by.
2. Select the menu you wish to view, then press A.
• D:
117
Vodafone live!
Launch browser option menu.
Browser Menu
When you have started browsing, you can reach
browsing options by pressing D.
The Browser Menu contains the following:
Back:
Home:
Go to the previous screen.
Go to the homepage you set in the WAP
Settings.
Bookmarks: Add the site you are currently browsing to
your list of bookmarks, or see the list of
bookmarks.
Go to URL: Input the URL of the site you wish to go,
and go to the site.
Show URL: Display the URL you are currently
browsing.
SnapShots: Save the page you are currently browsing
to your list of Snap Shots, or see the list of
Snap Shots.
Save Items: Save images or sounds to the My Pictures
or My Sounds.
Alert Inbox: See the list of WAP push messages. You
can receive push messages via WAP
Services. This means that a service
provider sends WAP content to your
phone, without any set up.
Reload:
Refresh the contents of the WAP page.
Settings:
Includes “Restart Browser”, some settings,
etc.
Bookmarks
Adding a Bookmark
1. Press A when you are browsing to display the
Option Menu.
When you add a bookmark for the first time, press
C [Add] instead, then skip to step 3.
2. Press
or
to select “Add”, then press
3. Enter the bookmark title, then press
4. Enter the URL address, then press
Vodafone live!
118
Accessing Bookmarked Pages
1. Press A when you are browsing to display the
Option Menu.
2. Press
or
to select “?????”, then press
Deleting Bookmarks
1. Press A when you are browsing to display the
Option Menu.
2. Press
or
to select “??Delete??”, then press
3. Select a bookmarked page you wish to access, then
press
Editing Bookmarks
1. Press A when you are browsing to display the
Option Menu.
2. Press
or
to select “??Edit??”, then press
3. Edit the bookmark title.
For details on entering characters, see “Entering
Characters” on page 29.
4. Press
5. Edit the URL address.
6. Press
119
Vodafone live!
Vodafone live!
120
Settings (M 7)
Phone Settings (M 7-1)
Changing the Language (M 7-1-1)
You can change the display language that the phone
uses for the display messages.
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then
press
3. Select “Phone Settings”, then press
4. Select “Language”, then press
5. Press
or
to select the desired language, then
press
Setting the Main Screen Display (M 7-1-2)
You can change the settings of the Main Screen
Display.
Wallpaper for the Stand-by Screen
For the stand-by screen of the main display an
animation and 3 illustrations are provided.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used for
wallpapers.
To Set Built-in Animations or Illustrations
1. Perform steps 1 to 3 in “Changing the Language”.
2. Press
or
to select “Main Display”, then
press
3. Press
4. Press
Note
• If you select “Automatic” in step 6, selected is the
language preset in the SIM card you subscribed to.
• If the SIM card you subscribed to is not supported,
the default language will be selected.
6. Press
121
Settings
or
to select “Wallpaper”, then press
or
to select “Preset Picture”, then
Tip
• You can also change the input language on the text
entry screen. To change the input language, select
“Editor” in step 5.
press
5. Select “Animation” or “Illustration 1” to
“Illustration 3”, then press
again to set.
The selected animation or illustration is displayed
on the stand-by screen.
Note
• Even if an animation is selected, the stand-by screen
displays a static picture when you do not operate the
phone for about 30 seconds (It is different according
to the selected data).
Tip
• To cancel the Wallpaper setting, select “Off” in step
4.
To Set My Pictures for the Stand-by Screen
1. Perform steps 1 to 3 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press
or
to select “My Pictures”, then press
The file names of the pictures that are registered in
the Saved Pictures is displayed.
3. Select the picture, then press
The selected picture is displayed.
4. Specify the range for displaying the picture by
pressing
or
, then press
The selected picture is displayed on the stand-by
screen.
Note
• Some pictures cannot be used because of their
picture and data types.
Backlight
You can turn the backlight of the main screen display
on or off when you press the keypad or the optional
cigarette lighter charger is connected to the phone.
You can change or specify the amount of time the
backlight is ON for, which will help conserve battery
life.
To Turn On/Off the Backlight
1. Perform steps 1 to 2 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press
or
to select “Backlight”, then press
3. Press
or
to select “On/Off”, then press
4. Select “On” to set backlight on or “Off” to set
backlight off, then press
When you select “On” in step 4:
5. Enter the duration of the backlight using 2 digits,
then press
To Turn On/Off the Backlight whilst Charging with
the Cigarette Lighter Charger
1. Perform steps 1 and 2 in “To Turn On/Off the
Backlight”.
2. Press
or
to select “In Car”, then press
Settings
122
3. Select “On” to set backlight on or “Off” to set
backlight off, then press
Adjusting the Brightness of the Backlight
You can adjust the brightness of the backlight of the
main screen display at nine levels.
1. Perform steps 1 to 2 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press
or
to select “Brightness”, then press
3. Press
(Light) or
(Dark) to adjust the
brightness for maximum clarity.
4. Press
Note
• The brightness of the backlight above does not affect
the brightness of the Sub-Screen.
Setting the Display Saving
This phone’s screen will automatically turn off after a
given amount of time if the phone is left open. This is
in order to conserve battery life.
You can change the time the Display Saving will go
into effect works between 2 and 20 minutes or disable
this function.
Tip
• When you purchase this phone, the Display Saving is
set to work 10 minutes later.
1. Perform steps 1 to 2 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press
or
to select Setting the “Display
Saving”, then press
3. Select “On” to set the Display Saving function on or
“Off” to set it off, then press
When you select “On” in step 3:
4. Enter the time until the Display Saving works in two
digits (02 to 20 minutes) using the digit keys, then
press
Note
• The Display Saving does not work whilst you are
calling, using WAP, or using a Java™ application.
123
Settings
To Cancel the Display Saving Function
The display saving continues until either a key is
pressed or there is an incoming alert. The first key press
will only cancel the display saver. You must press
another key in order to input any numerical or text
value.
Assigning Pictures
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
Setting the Greeting Message
You can set the message which will appear when the
phone is turned on.
1. Perform steps 1 to 2 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press
or
to select “Greeting Message”, then
press
To Set Built-in Pictures
1. Perform steps 1 to 2 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press
or
to select “Assign Pictures”, then
press
3. Press
or
to select “On”, then press
4. Enter the message, then press
Up to 16 characters can be stored as a message.
For details on entering characters, see “Entering
Characters” on page 29.
Tip
• To cancel the Greeting Message setting, select “Off”
in step 3.
3. Select the screen to set the picture, then press
4. Select “Animation 1” or “Animation 2”, then press
or
Select “picture 1” or “picture 2”, then press
when you select “Alarm” in step 3.
The selected picture is displayed.
5. Press
Tip
• To cancel the picture setting, select “Default” in step
4.
Settings
124
To Set My Pictures
1. Perform steps 1 to 3 in “To Set Built-in Pictures”.
2. Press
or
to select “My Pictures”, then press
The file name of the pictures that are registered in
the Saved Pictures is displayed.
3. Select the picture, then press
The selected picture is displayed.
4. Specify the range for displaying the picture by
pressing
or
, then press
Note
• Some pictures cannot be used because of their
picture and data types.
External Display (M7-1-3)
You can change the settings of the External Display.
To Turn On/Off the External Display
You can turn the External Display on or off when the
phone is closed.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “External Display”,
then press
3. Press
or
to select “LCD On/Off”, then press
4. Select “On” to set External Display on or “Off” to
set External Display off, then press
Wallpaper for the Stand-by Screen
For the stand-by screen of the External Display, and
animation and 3 illustrations are provided.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used for
wallpapers.
125
Settings
To Set Built-in Animations or Illustrations of the
External Display
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “External Display”, then
press
3. Press
or
to select “Wallpaper”, then press
or
to select “Preset Picture”, then
4. Press
press
5. Select “Animation” or “Illustration 1” to
“Illustration 3”, then press
6. Press
again to set.
The selected animation or illustration is displayed
on the stand-by screen.
Note
• Even if an animation is selected, the stand-by screen
displays a static picture when you do not operate the
phone for about 30 seconds (It is different according
to the selected data).
Tip
• To cancel the Wallpaper setting, select “Off” in step
4.
To Set My Pictures for the Stand-by Screen
1. Perform steps 1 to 3 in “To Set Built-in Animations
or Illustrations” on page 121.
2. Press
or
to select “My Pictures”, then press
The file names of the pictures that are registered in
the Saved Pictures is displayed.
3. Select the picture, then press
The selected picture is displayed.
4. Specify the range for displaying the picture by
pressing
or
, then press
The selected picture is displayed on the stand-by
screen.
Note
• Some pictures cannot be used because of their
picture and data types.
Settings
126
To Turn On/Off the Backlight of the External
Display
You can turn the backlight of the External Display on
or off when the phone is closed.
You can also change or specify the duration of the
External Display backlight.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “External Display”,
then press
3. Press
or
to select “Backlight”, then press
4. Select “On” to set backlight on or “Off” to set
backlight off, then press
When you select “On” in step 4:
5. Enter the duration of the backlight using 2 digits,
then press
127
Settings
To Adjust the LCD Contrast of the Sub-Screen
You may sometimes need to adjust the LCD contrast of
the Sub-Screen to suit certain lighting conditions.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “External Display”,
then press
3. Press
or
to select “LCD Contrast”,
then press
4. Press
(Dark) or
(Light) to adjust the contrast
for maximum clarity.
LCD contrast can be adjusted in 9 levels.
5. Press
To Set Picture Call (M 7-1-5)
Pictures stored in Phonebook can be displayed on
External Display when receiving an incoming call from
same number in the Phonebook.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “External Display”, then
press
3. Press
or
to select “Picture Call”, then press
4. Select “On” to set the picture call on or “Off” to set
the picture call off, then press
To Set Incoming Indication
Illustrations can be displayed on the External Display
when receiving an incoming call.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “External Display”, then
press
3. Press
or
to select “Incoming Indication”,
then press
4. Select “Pattern 1” to “Pattern 3”, then press
5. Select “Illustration 1” to “Illustration 4”, then press
Tip
• You can preview a selected illustration by pressing
To Display Clock on the External Display
You can set to display digital/analogue clock on the
External Display.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “External Display”, then
press
3. Press
press
or
to select “Clock Display”, then
4. Select “Digital Clock 1” to “Digital Clock 3” or
“Analogue Clock 1” to “Analogue Clock 3” , then
press
Tip
• You can preview a selected clock by pressing
• To cancel the clock display, select “Off” in step 4.
To Display Icon on the External Display
You can set to display icons on the wallpaper of the
External Display.
Settings
128
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
press
to select “External Display”, then
3. Press
to select “Icon Display”, then press
or
4. Select “On” to set icon display on or “Off” to set
icon display off, then press
Display Design (M 7-1-4)
You can change the display design by selecting from
three patterns.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “Colour Scheme”, then
press
3. Select “Pattern 1” to “Pattern 3”, then press
129
Settings
Phone Setting Reset (M 7-1-7)
The phone settings can be reset to their default settings.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “Set to Default”, then
press
3. Enter your handset code, then press
4. Press
or
to select “Yes”, then press
To cancel resetting, select “No” in step 4, then press
All phone settings are reset.
Note
• If you enter a wrong handset code in step 3, operation
is cancelled.
Call Settings
Set various types of functions and services.
Call Waiting (M 7-2-1)
If you wish to be able to receive another incoming call
whilst you have a call in progress, you must activate the
Call Waiting service.
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then
press
3. Press
or
to select “Call Settings”, then press
4. Select “Call Waiting”, then press
5. Select “On” to activate the Call Waiting service or
“Off” to deactivate it, then press
6. Press A [OK].
Note
• Call Waiting service may not be available on all
mobile phone networks. Contact your network
operator for more information.
To Check the Call Waiting Service Status
1. Perform steps 1 to 4 in “Call Waiting” on page 130.
2. Press
or
to select “Status”, then press
Now you can check the status of the Call Waiting
service.
3. Press C [Back].
Displaying Call Timers (M 7-2-2)
1. Perform steps 1 to 3 in “Call Waiting” on page 130.
2. Press
or
to select “Display Call Timers”,
then press
3. Select “On” or “Off”, then press
Showing Your Phone Number (M 7-2-3)
This lets you control whether to show your phone
number when calling another party.
Display Caller No. is not supported on all networks.
Please check with your service provider for availability.
1. Perform steps 1 to 3 in “Call Waiting” on page 130.
2. Press
or
to select “Showing Your Phone
Number”, then press
3. Select “On” to show your phone number or “Off”
not to show your phone number, then press
Settings
130
To Check the Caller No. Status
1. Perform steps 1 to 2 in “Showing Your Phone
Number”.
2. Press
or
to select “Status”, then press
Now you can check the status of the Display Caller
No.
3. Press A [OK].
Personal Call (M 7-2-5)
A specified ring tone or vibrator setting can be
associated to a pre-registered phone number.
Up to 20 phone numbers can be registered.
1. Perform steps 1 to 3 in “Call Waiting” on page 130.
2. Press
or
to select “Personal Call”, then press
Adjusting Earpiece Volume (M 7-2-4)
You can adjust the earpiece volume.
1. Perform steps 1 to 3 in “Call Waiting” on page 130.
2. Press
or
to select “Earpiece Volume”, then
press
3. Select the number you wish to set, then press
4. Enter the phone number, then press
3. Press
to increase the earpiece volume or press
to decrease the earpiece volume, then press
Each press of
or
adjusts the earpiece volume
by one of 5 levels.
If you wish to select the phone number in the
Phonebook, search for the desired Phonebook entry.
Press
or A [Search] to search the number
by name or press
or
to search in alphabetical
order, then press
. For details on searching the
Phonebook entries, see “Finding a Name and
Number” on page 41.
5. Press
press
or
to select “Assign Melody”, then
6. Select a ring tone.
For details on selecting a ring tone, see “Ringer
Type” on page 59.
7. Press
or
to select “Vibration”, then press
131
Settings
8. Press
or
to select “Enable”, “Disable” or
“Link to Sound”, then press
For details on setting the vibrator, see “Vibration”
on page 59.
9. When setting is complete, select “Setup End”, then
press
Flip Setting (M 7-2-x)
You can select whether to end the call or to put it on
hold when you close your phone.
1. Perform steps 1 to 3 in “Changing the Language” on
page 121.
2. Press
or
to select “Flip Setting”, then press
3. Press
or
to select “End Call” to end the call
or select “Hold” to make it hold, then press
Group Call (M 7-2-6)
Phone numbers can be registered or updated in groups.
To Set Group Ring Tone
Different ring tones can be set for each group.
When you purchase this phone, groups are set to off.
If you do not set a group ring tone the default ring tone
will be used.
1. Perform steps 1 to 3 in “Call Waiting” on page 130.
2. Press
or
to select “Group Call”, then press
3. Select the group you want to set, then press
4. Press
or
to select “On”, then press
5. Press
or
to select “Assign Melody”, then
press
6. Select a ring tone.
For details on selecting a ring tone, see “Ringer
Type” on page 59.
7. Press
or
to select “Vibration”, then press
Settings
132
8. Press
or
to select “Enable”, “Disable” or
“Link to Sound”, then press
For details on setting the vibration, see “Vibration”
on page 59.
9. When setting is complete, select “Setup End”, then
press
Call Setting Reset (M 7-2-9)
The call settings can be reset to their default settings.
1. Perform steps 1 to 3 in “Call Waiting” on page 130.
2. Press
or
to select “Set to Default”, then
press
Tip
• To cancel the ring tone setting, select “Off” in step 4.
To cancel resetting, select “No” in step 4, then press
Auto Redial (M 7-2-7)
See “Automatic Redialling” on page 22 about this
function.
Minute Minder (M 7-2-8)
Minute Minder function informs you of your talk time
by sounding a tone after every minute.
1. Perform steps 1 to 3 in “Call Waiting” on page 130.
2. Press
or
to select “Minute Minder”, then
press
3. Press
or
133
Settings
to select “On” or “Off”, then press
3. Enter your handset code, then press
4. Press
or
to select “Yes”, then press
All call settings are reset.
Note
• If you enter the wrong handset code in step 3, the
operation is cancelled and the screen returns to step
3 in “Call Waiting” on page 130.
Network Settings
Selecting a Network Automatically (M 7-3-1)
Each time the power is turned on, your phone will
always try to connect first to the most recently available
network, then to the subscribed network, and lastly to
the preferred network.
If none of these are found, it will then search for any
other available GSM networks.
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then
press
3. Press
press
or
to select “Network Settings”, then
4. Select “Select Network”, then press
5. Select “Automatic”, then press
1. As in step 5 in “Selecting a Network
or
to select
2. Select the network from the list, then press
3.
4.
5.
6.
7.
8.
9.
Press
or
to select “Add”, then press
Enter the country code.
Press
Enter the network code.
Press
Enter a new network name.
Press A [OK].
Editing the Preferred List
To Set the Network Manually
Automatically”, press
“Manual”, then press
Adding a New Network
1. Perform steps 1 to 4 in “Selecting a Network
Automatically”.
2. Press
or
to select “Add New Network”, then
press
To Change the Position of a Network in the
Preferred List
1. Perform steps 1 to 4 in “Selecting a Network
Automatically”.
2. Press
or
to select “Set Preferred”, then press
3. Select the name of the network to change the
position from the list, then press
Settings
134
4. Press
or
to select “Insert” or “Add to End”,
then press
To Delete a Network from the Preferred List
1. Perform steps 1 to 3 in “To Change the Position of
a Network in the Preferred List” on page 134.
or
to select “Delete”, then press
2. Press
Changing the Network Password (M 7-3-2)
1. Perform steps 1 to 3 “Selecting a Network
Automatically” on page 134.
2. Press
press
or
to select “Change Password”, then
3. Enter the old password, then press
4. Enter a new password, then press
5. Enter a new password again, then press
If you enter the incorrect password in step 5, the
screen will return to step 4 and you will be asked to
enter the password again.
6. Press
135
Settings
Selecting an Applicable Zone (M 7-3-3)
You need to select the applicable zone when using your
phone in different area.
For America:
1. Perform steps 1 to 3 in “Selecting a Network
Automatically” on page 134.
2. Press
or
to select “Select Zone”, then press
3. Press
or
to select “America”, then press
For other countries, select “Europe, Asia, etc.”, then
press
Internet Settings (M 7-4)
Item
WAP/MMS Settings
WAP Settings and MMS Settings can perform
following various setups, respectively.
Description
Circuit Prompt Circuit Prompt
Operation
Select “Circuit Prompt” and
press
Select “Enable” or “Disable” and press
WAP Settings
Item
Profile Name*
Description
Operation
Select “Profile Name” and
WAP Profile
press
Name (Unique
Enter the strings you like
Name)
and press
Select “IP Address” and
IP Address*
IP address
press
Enter IP address for WAP
and press
Connection
Type
Bearer Connection Type
APN*
Homepage
press
Enter Homepage URL, if
needed, and press
Access Point
Name
Security
Option
65535) and press
Select “UserName” and
UserName
User Name
press
Enter Port Number (1024-
Enter Access Point Name
and press
press
Enter User Name and press
Select “Port Number” and
Port Number*
and press
Select “GPRS Then CSD”,
“GPRS” or “CSD” and press
GPRS Settings (If “GPRS Then CSD” or “GPRS” will be
selected as connection type, they should be set)
Select “APN” and press
Select “Homepage” and
Homepage
Select “Connection Type”
Select “Password” and
Password
Password
press
Enter Password and press
Settings
136
Item
Description
Linger Time Linger Time
Operation
Select “Linger Time” and
press
Enter second time (099999) and press
press
Enter Access Point Number and press
ISDN or Analogue
UserName
User Name
Password
Password
press
Enter Password and press
137
Settings
Item
Profile Name*
Description
Operation
Select “Profile Name” and
MMS Profile
press
Name (Unique
Enter the strings you like
Name)
and press
Select “IP Address” and
IP Address*
IP address
press
Enter User Name and press
Select “Password” and
MMS Settings
Select “UserName” and
press
Enter second time (099999) and press
press
Select “ISDN” or “Analogue”
and press
Operation
Select “Linger Time” and
*: Item to be set as mandatory.
Select “Line Type” and
Line Type
Description
Linger Time Linger Time
CSD Settings (If “GPRS Then CSD” or “CSD” will be
selected as connection type, they should be set)
Select “Phone No.” and
Access Point
Phone No.*
Number
Item
press
Enter IP address for MMS
and press
Select “Relay Server URL”
Relay Server
URL*
MMS Relay
Server
and press
Enter URL of the Relay
Server and press
Item
Port Number*
Description
Security
Option
Operation
Select “Port Number” and
press
Enter Port Number (102465535) and press
Bearer Connection Type
and press
Select “GPRS Then CSD”,
“GPRS” or “CSD” and press
Linger Time Linger Time
Access Point
Name
Enter Access Point Name
and press
User Name
Phone No.*
Access Point
Number
Line Type
ISDN or Analogue
press
Enter Password and press
press
Select “ISDN” or “Analogue”
and press
Select “UserName” and
UserName
User Name
press
Enter User Name and press
Select “Password” and
Select “Password” and
Password
Select “Line Type” and
Password
press
Enter Access Point Number and press
press
Enter User Name and press
press
Enter second time (099999) and press
Select “UserName” and
UserName
Operation
Select “Linger Time” and
CSD Settings (If “GPRS Then CSD” or “CSD” will be
selected as connection type, they should be set)
Select “Phone No.” and
GPRS Settings (If “GPRS Then CSD” or “GPRS” will be
selected as connection type, they should be set)
Select “APN” and press
APN*
Description
Select “Connection Type”
Connection
Type
Item
Password
Password
press
Enter Password and press
Settings
138
Item
Description
Linger Time Linger Time
Operation
Select “Linger Time” and
press
Enter second time (099999) and press
*: Item to be set as mandatory.
To Set up your Account Information
This information should be supplied by your Internet
service provider.
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then
press
3. Press
press
or
to select “Internet Settings”, then
4. Press
or
to select “WAP Settings” or “MMS
Settings”, then press
5. Select the profile name you wish to edit, then press
6.
7.
8.
9.
139
Settings
Press
to select “Edit”, then press
Select the item you wish to edit, then press
or
Edit each item.
When you have finished editing, select “Setup
End”, then press
To Select Network Connection Profile
1. Perform steps 1 to 4 in “To Set up your Account
Information”.
2. Select the profile name to use, then press
3. Press
or
to select “Activate”, then press
Settings
140
Infrared (M 7-5)
You can use the built-in infrared modem to establish
contact between your phone and a PC equipped with an
infrared port.
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then
press
3. Press
4. Press
or
to select “Infrared”, then press
or
to select “On”, then press
“ ” will appear on the screen.
The infrared setting will return to off when no data
is transmitted/received via infrared communication.
141
Settings
Security (M 7-6)
Enabling/Disabling the PIN Code (M 7-6-1)
If the PIN code is enabled you will be asked in enter the
PIN code each time the phone is switched on. Your PIN
code is stored on the SIM and you should have been
made aware of the code when you purchased the SIM.
Contact your service provider for further details.
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then
press
3. Press
4. Press
or
to select “Security”, then press
or
to select “PIN Entry”, then press
or
to select “On” or “Off”, then press
5. Press
6. Enter your PIN code, then press
Changing PIN Code
This allows you to change the PIN code stored on the
SIM.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code”.
2. Press
or
to select “PIN Entry”, then press
3. Press
or
to select “Change PIN”, then press
4. Enter the existing PIN code, then press
5. Enter a new PIN code, then press
6. Enter a new PIN code again, then press
If you enter a code different from the code which
you entered in step 6, the screen returns to step 5.
Enter the correct code again.
Note
• If you enter the wrong PIN code three times in step 6,
the SIM will lock. To remove the lock, contact your
service provider/SIM vendor.
Settings
142
Handset Lock (M 7-6-2)
The Handset Lock is an additional security feature
which prevents unauthorised use of the phone or certain
features. The default Handset Lock code is “0000”.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code”.
2. Press
or
to select “Handset Lock”, then
press
3. Press
or
to select “On” or “Off”, then press
4. Enter your handset code, then press
If you enter an incorrect handset code, the screen
will clear and you will be prompted to enter the code
again.
Changing Handset Code
The default handset code is “0000”.
1. Perform steps 1 to 2 in “Handset Lock” on
page 143.
2. Press
or
to select “Change Code”, then press
3. Enter the old handset code, then press
4. Enter a new handset code, then press
143
Settings
5. Enter a new handset code again, then press
If you enter a code different from the code which
you entered in step 5, the screen returns to step 4.
Enter the correct code again.
Changing PIN2 Code (M 7-6-3)
PIN2 code is used to protect certain functions in the
phone such as Fixed Dialling No. and call cost limits.
The following shows you how to change PIN2 code.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code” on page 142.
2. Press
or
to select “Change PIN2”, then press
3. Enter the existing PIN2 code, then press
4. Enter a new PIN2 code, then press
5. Enter a new PIN2 code again, then press
If you enter a code different from the code which
you entered in step 5, the screen returns to step 4.
Enter the correct code.
Call Barring (M 7-6-4)
This function lets you place restrictions on incoming
and outgoing calls. To activate Call Barring you will
need the call barring password, which will be available
from your service provider.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code” on page 142.
2. Press
or
to select “Call Barring”, then press
3. Press
press
or
to select call barring option, then
The call barring functions available are:
• “Bar Foreign Calls”: Restricts all outgoing
international calls.
• “Only Local & Home”:Restricts all outgoing
international calls except to
your home country.
• “Bar Incoming Calls”: Restricts all incoming calls.
• “Bar Inc. if Abroad”: Restricts all incoming calls
when you are outside of the
coverage from your
registered network operator.
• “Bar Outgoing Calls”: Restricts all outgoing calls
except emergency calls.
4. Select one of the call barring options, then press
The call barring options available are:
• “All Services”:
Restricts all services.
• “Voice Calls”:
Restricts all voice calls.
• “Data”:
Restricts all data calls.
• “Fax”:
Restricts all fax calls.
• “Messages”:
Restricts all messages.
• “All except Msgs.”:
Restricts all services except
messages.
5. Select “On”, then press
If you select “Off”, the selected call barring setting
is cancelled.
6. Enter the network password, then press
To change the network password, see “Changing
the Network Password” on page 135.
7. Press A [OK].
The selected call barring function is activated.
If you enter a wrong network password, the entered
password is cleared. Enter the correct the password.
Settings
144
Checking Call Barring Status
1. Perform steps 1 to 4 in “Call Barring” on page 144.
2. Press
or
to select “Status”, then press
Now you can check the status of the selected call
barring option.
3. When you finish the confirmation, press C [Back].
Cancel All Call Barring Settings
1. Perform steps 1 to 2 in “Call Barring” on page 144.
2. Press
or
to select “Cancel All”, then press
3. Enter the network password, then press
4. Press A [OK].
All call barring settings are cancelled.
To Cancel the Call Barring Setting Individually
1. Perform steps 1 to 3 in “Call Barring” on page 144.
2. Select the call barring option you wish to cancel,
then press
3. Press
or
to select “Off”, then press
4. Enter the Barring password, then press
The selected call barring setting is cancelled.
Fixed Dialling No. (M 7-6-5)
When the Fixed Dialling No. is enabled, you can call to
only predefined numbers.
Enabling Fixed Dialling No.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code” on page 142.
2. Press
or
to select “Fixed Dialling No.”, then
press
3. Enter a PIN2 code, then press
4. Select “Settings”, then press
5. Select “On”, then press
If you select “Off”, Fixed Dialling No. is disabled.
145
Settings
Adding a New Name
1. Perform steps 1 to 3 in “Enabling Fixed Dialling
No.”.
2. Press
or
to select “Edit Dial List”, then press
3. Press
4. Press
press
or
to select “Add New Name”, then
For details on searching a name, see “Finding a
Name and Number” on page 41.
Deleting a Registered Name
For details on adding a name and a phone number,
see “Creating a New Entry” on page 38.
3. Search for the desired name.
3. Press
or
to select “Edit”, then press
4. Edit the selected name.
For details on editing a name, see “Editing
Phonebook Entries” on page 41.
5. Add a name and a phone number.
Searching a Registered Name
1. Perform steps 1 to 3 in “Adding a New Name”.
2. Press
or
to select “Search”, then press
Editing a Registered Name
1. Perform steps 1 and 2 in “Adding a New Name” on
page 146.
2. Select a name you wish to edit, then press
1. Perform steps 1 and 2 in “Adding a New Name” on
page 146.
2. Select a name you wish to delete, then press
3. Press
or
to select “Delete”, then press
4. Select “Yes”, then press
The selected name will be deleted.
To cancel deletion, select “No” in step 4, then press
Settings
146
Master Reset (M 7-7)
The settings can be reset to their default settings.
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then
press
3. Press
or
to select “Master Reset”, then press
4. Enter your handset code, then press
5. Press
or
to select “Yes”, then press
To cancel resetting, select “No” in step 5, then press
All settings are reset.
Note
• If you enter a wrong handset code in step 4, operation
is cancelled.
147
Settings
Settings
148
Organiser (M 8)
Calculator (M 8-1-1)
The calculator function performs the 4 arithmetic
calculations using up to 12 digits.
1. Press
to display the Main Menu.
2. Press , ,
or
to select “Organiser”, then
press
3. Select “Calculator”, then press
4. Select “Calculator”, then press
The calculator appears on the display.
5. Key operations for calculation are as follows.
149
Organiser
To enter a decimal point, press R.
To clear the entered number or operand, press C
[C].
To do the calculations, press D.
6. If you wish to start a new calculation, press C [C].
When calculation is complete, press F.
Rate Conversion
You can also use the calculator as a currency calculator
to convert from/to a home currency using a conversion
rate that you enter.
To Set a Currency Conversion Rate (M 8-1-2)
1. Perform steps 1 to 3 in “Calculator”.
2. Press
or
to select “Exchange Rate”, then
press
3. Press
or
to select “Foreign Domestic” or
“Domestic Foreign”, then press
To delete all digits, press C [Clear].
4. Enter the currency conversion rate, then press
To Convert a Value
1. Perform steps 1 to 4 in “Calculator”.
2. Press A [Options] to display the Option Menu.
3. Enter the value to be converted, then press
4. Press
or
to select “In Domestic” or “In
Foreign”, then press
The result is displayed.
If you select “Exchange Rate” in step 4, you can set
a currency conversion rate.
5. When calculation is complete, press F.
Note
• You cannot perform step 3 when a sign of the four
fundamental processes of arithmetic is displayed.
Calendar (M 8-2)
The Calendar function helps you organise and manage
your busy schedule. You can view the stored schedule
on a monthly basis.
1. Press
2. Press
press
to display the Main Menu.
or
to select “Organiser”, then
3. Press
or
to select “Calendar”, then press
The current month will be displayed and current
date will be highlighted.
4. Select the day for the schedule by pressing ,
or
, then press
5. Press
press
or
and select the note number, then
6. Enter the schedule content, press
Up to 3 schedule items can be stored.
For details on entering characters, see “Entering
Characters” on page 29.
If you wish to add another item, repeat steps 5 and 6.
Organiser
150
7. When you have finished entering, press C [Back].
The screen returns to the calendar. Dates with
scheduled tasks/meetings are underlined.
Note
• The calendar can be displayed for dates from
January 2000 through to December 2099.
Find a Particular Date
You can move the view to a specified date in the
calendar.
1. Press A [Options] to display the Option Menu.
2. Select “Go to Date”, then press
3. Enter the date of the calendar to be displayed, then
press
The specified date is displayed.
151
Organiser
Changing to Weekly Format
You can change the Calendar to weekly format.
1. Perform steps 1 to 3 in “Calendar” on page 150.
The current month will be displayed and current
date will be highlighted.
2. Press A [Options] to display the Option Menu.
3. Press
press
or
to select “Weekly Format”, then
4. Select “Monday-Sunday” to display weekly format
from Monday or “Sunday-Saturday” to display
weekly format from Sunday, then press
Deleting Schedules
To Delete Schedule Items
1. Perform steps 1 to 3 in “Calendar” on page 150.
2. Select the day by pressing
or
, then
press
3. Select the item you wish to delete, then press A
[Options].
The Options Menu is displayed.
4. Press
or
to select “Delete”, then press
5. Select “1 Data”, then press
6. Select “Yes”, then press
3. Press
or
to select “Delete”, then press
4. Select “1 Day” to delete all contents for a day, then
press
To cancel deleting, select “No” in step 6, then press
To Delete All Scheduled Tasks/Meetings for a
Specific Day
1. Perform steps 1 to 3 in “Calendar” on page 150.
2. Select the day you wish to delete by pressing
or
, then press A [Options].
The Options Menu is displayed.
5. Select “Yes”, then press
To cancel deleting, select “No” in step 5, then press
To Delete All Scheduled Entries
1. Perform steps 1 to 3 in “Calendar” on page 150.
2. Press A [Options] to display the Options Menu.
3. Press
or
to select “Delete” to delete all
scheduled entries, then press
4. Press
or
to select “All Data” to delete all
scheduled entries, then press
5. Select “Yes”, then press
To cancel deleting, select “No” in step 5, then press
Organiser
152
Clock & Alarm
You need to set the correct time and date in order for
your phone’s various time-based functions to work
correctly.
Setting the Date and Time (M 5-3-4)
1. Press
to display the Main Menu.
2. Press , ,
or
to select “Organiser”, then
press
3. Press
press
to select “Clock & Alarm”, then
or
to select “Set Date/Time”, then
4. Press
press
or
5. Enter the day, month, year and time using the digit
keys, then press
When you enter the time in a 12-hour clock format,
press P and change am/pm.
The order in which the date and time appears is
based on the format setting. See “To Select the Date
Format”.
153
Organiser
To Select the Time System
1. Perform steps 1 to 3 in “Setting the Date and Time”
on page 153.
2. Press
or
to select “Clock Settings”, then
press
3. Select “Time Format”, then press
4. Press
or
to select “12 hour” or “24 hour”,
then press
To Select the Date Format
The date format can be switched between
“Day.Month.Year”, “Month-Day-Year” or “Year/
Month/Day”.
1. Perform steps 1 to 3 in “Setting the Date and Time”
on page 153.
2. Press
or
to select “Clock Settings”, then
press
3. Press
or
to select “Date Format”, then press
4. Press
or
to select “D.M.Y”, “M-D-Y” or
“Y/M/D”, then press
To Set Daylight Saving Time
You can switch to daylight saving time without having
to change the clock time itself.
1. Perform steps 1 to 3 in “Setting the Date and Time”
on page 153.
2. Press
press
or
4. Press
3. Press
3. Press
press
to select “Clock Settings”, then
To Customise the Time Zone
1. Perform steps 1 to 3 in “Setting the Date and Time”
on page 153.
2. Press
or
to select “Set Time Zone”, then
press
press
or
to select “Daylight Saving”, then
or
to select “Set Custom Zone”, then
4. Enter the time using the digit keys, then press
Each press of P switches - and +.
or
to select “On”, then press
Setting the Time Zone (M 8-3-3)
1. Perform steps 1 to 3 in “Setting the Date and Time”
on page 153.
2. Press
or
to select “Set Time Zone”,
then press
3. Select “Change Zone”, then press
4. Press
or
to set the home city, then press
Setting Alarm (M 8-3-1)
Alarm function allows you to be alerted at a specified
time.
Note that the alarm may not function correctly if the
clock has not been set.
1. Press
to display the Main Menu.
2. Press , ,
or
to select “Organiser”, then
press
3. Press
press
or
to select “Clock & Alarm”, then
4. Select “Set Alarm”, then press
Organiser
154
5. Select “List Alarm”, then press
6. Press
or
to select the desired alarm number,
then press
Up to 5 alarm times can be specified.
7. Select “Set Time”, then press
8. Enter the alarm time using the digit keys, then press
When you enter the alarm time in a 12-hour clock
format, press P and change am/pm.
9. Press
or
to select “Repeat Daily”, then press
10. Press
or
to select “On” or “Off”, then press
or
to select “Alarm Status”, then press
11. Press
12. Press
or
to select “On”, then press
13. Press C [Save].
155
Organiser
To Change the Type of Alarm Tone
1. Perform steps 1 to 6 in “Setting Alarm” on
page 154.
2. Press
or
to select “Alarm Tone”, then press
3. Select “Melody”, then press
4. Press
or
to select “Preset Melody” or “My
Sounds”, then press
5. Select the alarm tone.
If you wish to hear the demo play, press A [Play].
To stop playing, press C [Stop].
6. When selection is complete, press
To Change the Vibration of Alarm
1. Perform steps 1 to 6 in “Setting Alarm” on
page 154.
2. Press
or
to select “Alarm Tone”, then press
Changing Alarm Settings
1. Perform steps 1 to 5 in “Setting Alarm” on
page 154.
2. Select the number you wish to change, then press
3. Press
3. Change Alarm settings.
or
to select “Vibration”, then press
4. Press
or
to select “Enable”, “Disable” or
“Link to Sound”, then press
To Change the Duration of Alarm
1. Perform steps 1 to 6 in “Setting Alarm” on
page 154.
2. Press
or
to select “Alarm Tone”, then press
3. Press
or
to select “Duration”, then press
The current duration is displayed.
4. Enter the length of the duration in 2 digits (02 to 59
seconds) using the digit keys, then press
For details on changing Alarm settings, see “To
Change the Type of Alarm Tone” on page 155.
Disabling Alarm Function
1. Perform steps 1 and 2 in “Changing Alarm
Settings”.
or
2. Press
to select “Alarm Status”, then press
3. Press
or
to select “Off”, then press
4. Press C [Save].
“
” disappears from the screen.
Organiser
156
Resetting an Alarm Setting
1. Perform steps 1 to 5 in “Setting Alarm” on
page 154.
2. Select the number you wish to reset, then press
3. Press
or
to select “Reset Alarm”, then press
or
to select “Yes”, then press
4. Press
Resetting All Alarm Settings
1. Perform steps 1 to 4 in “Setting Alarm” on
page 154.
2. Press
or
to select “Clear All”, then press
3. Press
157
or
Organiser
to select “Yes”, then press
Voice Memo (M 8-4)
This allows you to record a voice message of up to 10
seconds, which can be used to remind you of schedule
entries or be sent within an MMS. The recorded voice
memo is registered in the My Sounds.
Recording a Voice Memo
1. Press
to display the Main Menu.
2. Press , ,
or
to select “Organiser”, then
press
3. Press
or
To Play Back the Saved Voice Memo
1. Perform steps 1 to 5 in “Recording a Voice Memo”
on page 158.
2. Press
or
to select “Playback”, then press
3. Press
The recorded voice memo is played back.
To stop playback, press
to select “Voice Memo”, then press
4. Press
to start recording.
To stop recording before the recording time is over,
press
5. Select “Save” to save the voice memo, then press
If you wish to exit the voice memo, press C [Exit],
then select “Yes”.
Tip
• You can also record a voice memo by pressing
and R instead of steps 1 to 3.
• If you wish to record a voice memo again, select
“Record Again” in step 6. The screen will return to
step 5.
Organiser
158
PC Connection (M 8-5)
Help List (M 8-6)
You can select a method to contact between your phone
and a PC from infrared link or cable connection.
1. Press
to display the Main Menu.
2. Press , ,
or
to select “Organiser”, then
You can view the help list and use it to guide you in the
phone’s functions.
1. Press
to display the Main Menu.
2. Press , ,
or
to select “Organiser”, then
press
3. Press
or
to select “PC Link”, then press
4. Select “Infrared” for infrared link or “Data Cable”
3. Press
for cable connection, then press
or
to select “Help List”, then press
The help list is displayed.
4. Check the key operation by pressing
and
5. When you have finished, press C [Back].
159
Organiser
Organiser
160
Call Manager (M 9)
Call Log
The phone will record the last 10 missed calls, received
calls and dialled numbers.
Viewing Call Log
1. Press
to display the Main Menu.
2. Press
or
to select “Call Manager”,
then press
3. Press
or
to select “Call Register”, then press
4. Press
or
to select “Missed Calls”, “Received
Calls” or “Dialled Numbers”, then press
The selected call log list is displayed.
5. Select the number you wish to view.
6. Press
Call record “1” is the most recent.
When you press
, call record “2” will be
displayed.
If you wish to dial the number, press D.
161
Call Manager
7. When you have finished, press C [Back] to return
to step 4.
Tip
• You can also confirm call records by pressing D in
stand-by mode.
• You can switch between histories by pressing
or
in step 5 only when you enter by D in stand-by
mode.
Sending Messages
1. Perform steps 1 to 5 in “Viewing Call Log”.
2. Select the file name you wish to send, then press
. Selected call record will be displayed in detail.
3. Press A [Options] to display the Options Menu.
4. Press
or
to select “Send Message”, then
press
5. Press
press
or
to select “MMS” or “SMS”, then
6. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 99 or “Creating a New SMS”
on page 110.
Deleting Call Log
4. Press
Deleting Single Call Record
1. Perform steps 1 to 5 in “Viewing Call Log”.
2. Select the file name you wish to delete, then press
Selected call record will be displayed in detail.
3. Press A [Options] to display the Options Menu.
Tip
• If you select “Missed Calls”, “Received Calls” or
“Dialled Numbers” in step 3, the call log in the
selected category will be deleted.
4. Press
5. Press
Call Timers (M 9-2-5)
or
to select “Delete”, then press
or
to select “Yes”, then press
The selected call record will be deleted.
To cancel deletion, select “No” in step 5, then press
To Delete All Call Log (M 9-2-4)
1. Perform steps 1 to 3 in “Viewing Call Log” on
page 161.
2. Press
or
to select “Yes”, then press
All call log records will be deleted.
To cancel deleting, select “No” in step 4, then press
This function lets you check the duration of your calls.
Checking the Duration of the Last Call
1. Press
to display the Main Menu.
2. Press
or
to select “Call Manager”,
then press
3. Press
or
to select “Clear Logs”, then press
3. Select “All Calls”, then press
4. Press
or
to select “Call Register”, then press
or
to select “Call Timers”, then press
5. Select “Last Call”, then press
The duration of the last call is now displayed.
Call Manager
162
6. When you have finished, press C [Back] to return
to call timers menu.
Checking the Total Call Time
1. Press
or
to select “All Calls”, then press
in step 5 in “Checking the Duration of the Last
Call”.
2. When you have finished, press C [Back].
Resetting All Call Timers
1. Perform steps 1 to 4 in “Checking the Duration of
the Last Call”.
2. Press
or
to select “Clear Timers”, then press
3. Press
or
to select “Yes”, then press
To cancel resetting, select “No”, then press
4. Enter your handset code, then press
The Call Timers are reset to zero.
163
Call Manager
Call Costs (M 9-2-6)
This function lets you check the charges for your calls.
Charging Advice is not supported on all networks.
Please check with your service provider for availability.
Checking the Cost of the Last Call
1. Press
to display the Main Menu.
2. Press
or
to select “Call Manager”,
then press
3. Press
or
to select “Call Register”, then press
or
to select “Call Costs”, then press
4. Press
5. Select “Last Call”, then press
The cost of the last call is now displayed.
6. When you have finished, press C [Back] to return
to call costs menu.
Checking the Total Call Cost
1. Press
or
to select “All Calls”, then press
in step 5 in “Checking the Cost of the Last Call”.
2. When you have finished, press C [Back].
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 163.
or
to select “Cost Units”, then press
2. Press
3. Press
or
to select “Set Units”, then press
4. Enter your PIN2 code, then press
5. Enter a cost per unit, then press
To enter a decimal point, press R.
6. Enter a currency unit (up to 3 characters), then press
Checking the Charge Rate
1. Select “Read Units”, then press
in step 3 in
“Setting the Charge Rate”.
The charge rate is now displayed.
2. When you have finished, press C [Back].
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 163.
or
to select “Max Cost”, then press
2. Press
3. Press
or
to select “Set Limit”, then press
4. Enter your PIN2 code, then press
5. Enter a value, then press
To enter a decimal point, press R.
Call Manager
164
Checking the Charge Limit
1. Select “Read Limit”, then press
in step 3 in
“Setting the Charge Limit”.
The value of the charge limit is now displayed.
2. When you have finished, press C [Back].
Resetting All Call Costs
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 163.
or
to select “Clear Costs”, then press
2. Press
3. Press
or
to select “Yes”, then press
To cancel resetting, select “No”, then press
4. Enter your PIN2 code, then press
The Call Costs are reset to zero.
Checking the Residual Credit
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 163.
or
to select “Residual Credit”, then
press
2. Press
3. When you have finished, press C [Back].
165
Call Manager
Data Counter (M 9-2-7)
You can confirm the amount of bytes which you used
in the GPRS transmission.
1. Press
to display the Main Menu.
2. Press
or
to select “Call Manager”,
then press
3. Press
or
to select “Call Register”, then press
or
to select “Data Counter”, then press
3. Press
or
to select “Yes”, then press
The Data Counter is reset to zero. To cancel
resetting, select “No” in step 3, then press
4. Press
5. Press
or
to select “Last Data” or “All Data”,
then press
You can now check the amount of bytes.
6. When you have finished, press C [Back].
Resetting All Data Counter
1. Perform steps 1 to 4 in “Data Counter”.
2. Press
or
to select “Clear Counter”, then
press
Call Manager
166
Diverts (M 9-3)
This service is used to divert incoming calls to your
voice mail system or to another number depending on
certain conditions in which you cannot answer a call.
Divert Calls
1. Press
to display the Main Menu.
2. Press
or
to select “Call Manager”,
then press
3. Press
or
to select “Diverts”, then press
4. Select one of the divert options, then press
The divert options available are:
• “All Calls”:
Diverts all voice calls without
ringing.
• “When Busy”: Diverts incoming calls when you
are
on a call.
• “No Answer”:
Diverts incoming calls if you do
not answer a call within a
certain period of time.
167
Call Manager
• “Not Reachable”: Diverts incoming calls when your
phone is out of network service or
switched off.
5. Select “On”, then press
6. If you wish to divert calls to a number which is
located in the Phonebook, search for the desired
Phonebook entry.
Press
or A [Search] to search the number
by name or press
or
to search in alphabetical
order, then press
. For details on searching the
Phonebook entries, see “Finding a Name and
Number” on page 41.
7. If you wish to divert calls to a number which you
can enter manually, enter the phone number.
8. Press
If you select “No Answer” in step 4:
9. Select the period of time from 6 levels (05 to 30
seconds), then press
Note
• When a divert is set to “All Calls”, “
on the stand-by screen.
4. Press A [OK].
” appears
All divert settings are cancelled.
To cancel the Divert Settings Individually
Tip
• If you select “By Service” in step 5, you can select the
divert option further in the selected option in step 4.
1. Perform steps 1 to 3 in “Divert Calls” on page 167.
2. Select the divert option you wish to cancel, then
Checking the Divert Status
1. Perform steps 1 to 3 in “Divert Calls” on page 167.
2. Select the divert option you wish to check, then
press
3. Press
or
to select “Off”, then press
4. Press A [OK].
press
The selected divert has been cancelled.
3. Press
or
to select “Status”, then press
You can now check the status of the selected divert
option.
4. When you have finished, press C [Back].
Cancelling All Divert Settings
1. Perform steps 1 to 3 in “Divert Calls” on page 167.
2. Press
or
to select “Cancel All”, then press
3. Press
or
to select “Yes”, then press
To cancel the resetting, select “No” in step 3, then
press
Call Manager
168
Speed Dial List (M 9-4)
Own Numbers (M 9-5)
You can view phone numbers registered in the Speed
Dial List.
1. Press
to display the Main Menu.
2. Press
or
to select “Call Manager”,
then press
You can check your own voice, data and fax phone
numbers.
1. Press
to display the Main Menu
2. Press
or
to select “Call Manager”,
then press
3. Press
3. Press
or
to select “Speed Dial List”, then
press
The stored names and phone numbers in the Speed
Dial List are displayed in order.
press
or
to select “Own Numbers”, then
4. Press
or
to select the phone number you
wish to check from either “Voice”, “Data” or “Fax”,
then press
Note
• “Data” or “Fax” may not be displayed depending on
SIM card.
169
Call Manager
Call Manager
170
Data Transmission
Your PC can be set up to use the GX20 as a modem.
You can either use Infrared (IrDA) or a data cable “XN1DC10” (option) to connect to the PC.
Refer to XN-1DC10 attached manual for the
connection method of a data cable.
System Requirements
Windows®98*, Windows®Me,
Windows®2000, Windows®XP
* Windows®98 Second Edition, or Windows®98 +
Internet Explorer 5.01 or later
OS:
Interface: Infrared (IrDA) or Serial port (D-sub 9-pin
connector)
CD-ROM drive
• When using the infrared modem function for
executing data transmission, align the infrared port
with each other.
Software Installation and Setup
Note
• The distance between the infrared ports which can
communicate is a maximum of 20 cm within a 30°
angle.
• When transmitting data via infrared communication,
you need to set the infrared setting to “On”. (p. 141)
• It is not recommended that you make or answer a call
during data transmission. The operation may be
interrupted.
For details on software installation and setup, download
from the following site:
http://www.sharp-mobile.com
171
Data Transmission
Transmitting Picture Files
By installing software for data transmission into your
PC, you can transmit picture files between your phone
and a PC.
Download software for data transmission from the
download page in the following site.
http://www.sharp-mobile.com
To connect your phone to a PC, you can choose the data
cable (RS232C) “XN-1DC10” (option) or infrared
communication. Follow the following.
1. Press
to display the Main menu.
2. Press
or
to select “Organiser”, then
press
3. Select “PC Link”, then press
4. Press
or
to select “Infrared” or “Data
Cable”.
Note
• Some large picture files may not be able to be
transmitted from the PC to the phone.
Data Transmission
172
Troubleshooting
Problem
The phone does not
turn on.
PIN code or PIN2
code is rejected.
SIM card becomes
locked.
The display is difficult to read.
173
Problem
Solution
• Make sure the battery is
properly inserted and
charged.
• Make sure you have entered
the correct code (4 to 8
digits).
• Your SIM card/protected
functions will become locked
after 3 unsuccessful
attempts.
• Contact your SIM provider if
you do not have the correct
PIN code.
• Enter PUK code (8 digits)
provided by your service
provider (if supported).
• If the attempt is successful,
enter the new PIN code and
confirm your phone is
operational again. Otherwise
contact your dealer.
• Adjust the LCD contrast.
Troubleshooting
Phone functions do
not work after the
phone is turned on.
Calls cannot be
made or received.
Solution
• Check the radio signal
strength indicator as you may
be outside the service area.
• Check to see if any error
message is displayed when
you turn your phone on. If so,
contact your dealer.
• Make sure the SIM card is
correctly inserted.
• If the message “SIM Card
Error” is displayed at start-up,
you cannot use your SIM card
or SIM card is damaged.
Contact your dealer or
network service provider.
• Check your call barring, fixed
dialling setting, remaining
battery and call forwarding
settings.
• Check if your phone is
currently performing data
communication using Infrared
(IrDA) or a data cable.
• Check the remaining balance
if you are using a pre-paid
SIM card.
Problem
Call quality is poor.
Cannot access network service.
Cannot send or
receive SMS.
Cannot connect to
MMS service provider.
Solution
• Your current location may not
provide good call quality (i.e.,
in a car or train). Move to a
location where radio signal
strength is greater.
• Check where your account
has been registered and
where the service is
available.
• Make sure you are correctly
subscribed for the Short
Message Service, that the
network supports this service,
and that the centre number is
set up correctly. If not, contact
your network service
provider.
• MMS settings and
configuration may be missing
or incorrect or network does
not support it. Check your
service provider’s access
point number.
Contact your service provider
to confirm the correct
settings.
Problem
Limited memory
available.
Solution
• Delete any unnecessary data.
Troubleshooting
174
Safety Precautions and Conditions of Use
FCC Declaration of Conformity
Dual-band
phone: GX10i
Tri
20 with PC/Data interface cable
XN-1DC10
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Responsible Party:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430
TEL: 1-800-BE-SHARP
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Notice
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC
can require you to stop using the phone if such
interference cannot be eliminated.
175
Safety Precautions and Conditions of Use
Information To User
This equipment has been tested and found to comply
with the limits of a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation; if this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
Safety Precautions and Conditions of Use
124
CAUTION: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to operate
the equipment.
125
Safety Precautions and Conditions of Use
Safety Precautions and Conditions of Use
176
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards that
were developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6W/kg.* Tests for SAR are conducted using
standard operating positions specified by the FCC with
the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the
177
Exposure to Radio Waves
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels so
as to use only the power required to reach the network.
In general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the public,
it must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for
use at the ear is **** W/kg and when worn on the body,
as described in this user guide, is **** W/kg. Bodyworn Operation; This device was tested for typical
body-worn operations with the back of the phone kept
1.5 cm from the body. To maintain compliance with
FCC RF exposure requirements, use accessories that
maintain a 1.5 cm separation distance between the
user's body and the back of the phone. The use of beltclips, holsters and similar accessories should not
contain metallic components in its assembly.
The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure
requirements, and should be avoided.
Exposure to Radio Waves
126
While there may be differences between the SAR levels
of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
00030
searching on FCC ID APYHRO00029.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
web-site at http://www.wow-com.com.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/
kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
127
Exposure to Radio Waves
Exposure to Radio Waves
178
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:04:18 10:14:02+09:00
Modify Date                     : 2003:04:18 10:14:02+09:00
Page Count                      : 172
Creation Date                   : 2003:04:18 01:14:02Z
Mod Date                        : 2003:04:18 01:14:02Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2003:04:18 01:14:02Z
EXIF Metadata provided by EXIF.tools
FCC ID Filing: APYHRO00030

Navigation menu