Sharp HRO00035 1900MHz GSM Cellular Phone W/Bluetooth User Manual
Sharp Corporation 1900MHz GSM Cellular Phone W/Bluetooth
UserManual.wiki
>
Sharp
>
HRO00035 User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![14 Getting StartedTo Copy Contacts List from the SIM CardWhen you insert the SIM card into your phone for the first time and start the Contacts List application, you are asked whether you wish to copy Contacts List entries on the SIM card. Follow the on-screen instructions, or you can do it later using the Contacts List menu as follows:“Contacts” → “Contacts List” → [Options] → “Advanced” → “Copy All Entries”1. Select “From SIM to Handset”.Keypad LockYou can lock the keypad to prevent it from being pressed accidentally. Locking the Keypad1. Press P, then [LockKeys] during stand-by. The soft and centre keys are not displayed. To unlock, press P, then [Yes]. Tip• Emergency numbers (112, etc.) can be input and dialled regardless of the keypad lock.• To lock the keypad automatically, see “Auto Keypad Lock” on page 100.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-15.png)
![Getting Started 15Display Indicators Status Indicators1. / : Strength of received signal / Service out of range2. : GPRS enabled and within range — flashes during GRPS transmission.3. / / : Alerts [Text message / Multimedia message / WAP]4. / : Current application [executed (colour) / suspended (grey)]5.(No display)/////:Current profile [Normal / Meeting / Activity / Car / Headset / Silent]6. : T9 text input method enabled7. ///:Current text input method [First letter upper case / Upper case / Lower case / Numeric]8. : “Diverts” (p. 91) set to “All Calls”Status indicatorsRight soft keyLeft soft keyCentre key/Navigation keys](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-16.png)
![16 Getting Started9. / : Secured WAP page displayed10. : Call incoming11. : Call in progress12. / : Current WAP or MMS communication mode [CSD / GPRS]13. : Battery level14. : Roaming outside network15. : “Ringer Volume” (p. 84) set to “Silent”16. : Vibration alert (p. 85) enabled17. : USB data cable connected18. / : “Infrared” connection [enabled / communicating]19. :Bluetooth wireless setting [enabled / handsfree headset / handsfree car kit]20. : Data communication mode enabled21. : Fax communication mode enabled22. : Outbox contains unsent multimedia messages23. : Voicemail message alert24. : Daily alarm enabled25. / : Schedule entry with reminder alarm [enabled / disabled]26. : Keypad Lock (p. 14) enabled](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-17.png)
![Navigating Functions 17Navigating FunctionsAll applications are accessed from the Main menu. To open the Main menu, press the centre key ( ) during stand-by.To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press to commit your selection.In certain procedures, you will need to press one of the soft keys (indicated in square brackets), which are displayed at the bottom left and right of the screen. Press the corresponding soft key (A or C).To return to the previous screen, press the right soft key if it displays “Back”. To close the Main menu, press the right soft key if it displays “Exit”.Each section in this user guide starts with a list of items you will need to select in order (indicated in italics) before performing the procedures shown. Select each item to reveal the next set of items that you have to select. Open subsection items after opening those listed in the main section.Example:“Contacts” → “Contacts List” → [Options] → “Advanced”](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-18.png)
![18 Call FunctionsCall FunctionsMaking a Call1. Enter the area code and the phone number you wish to dial and press D to dial.If you enter the wrong number, press [Clear] to delete the number to the left of the cursor.Emergency Calls1. Enter 112 or 911 (international emergency number) using the keypad and press D to dial.Note• Emergency calls may not be available on all mobile phone networks when certain network services and/or phone features are in use. Contact your network operator for more information.• This Emergency number can normally be used to make an emergency call in any country, with or without a SIM card inserted, if a GSM network is within range.International Calls1. Press and hold P until a “+” (international dialling prefix) sign is displayed.2. Enter the country code, followed by the area code (without the leading zero) and the phone number, and press D to dial.Speed DiallingUp to 9 phone numbers from the Contacts List memory (Handset and SIM) can be assigned to speed dials. You can call the numbers using the digit keys (H to O and Q).For details on setting the Speed Dial List, see “Speed Dial List” on page 33.1. To dial a number using the speed dial, press and hold any of the digit keys (H to O and Q).The phone number stored in the Speed Dial List is dialled.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-19.png)
![Call Functions 19RediallingYou can redial numbers in the call log. Select from specific categories or “All Calls”. Specific category contains up to 10 numbers and the “All Calls” list contains up to 30.1. Press D during stand-by.2. Select the category from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”.To switch logs, press c or d.3. Select the phone number you wish to call.4. Press D to redial the call.Automatic RediallingThis setting allows you to automatically redial the number if the first attempt was unsuccessful because the called party was busy.If you wish to stop redialling, press F or [End].To Set the Auto Redial Function“Settings” → “Call Settings” → “Auto Redial”1. Select “On” or “Off”.Note• When you receive an incoming call, the Auto Redial function is interrupted.• Automatic redialling is not available for fax and data calls.Answering a CallWhen an incoming call is detected, the phone rings.1. Press D, or [Answer] to answer the call.Or press any key except F and [Busy] when the “Any Key Answer” function is enabled. Set the Any Key Answer function in the profile of each mode. (p. 88)Tip• When the Personal handsfree kit (option) is connected to the phone, you can answer calls by pressing the Answer button.• If you have subscribed to the Calling Line Identification (CLI) service and the caller’s network sends the number, the caller’s number is displayed on the screen. If the caller’s name and number are stored in the Contacts List, the caller’s name and phone number are displayed on the screen.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-20.png)
![20 Call Functions• If the number is a restricted number, the display shows “Withheld”.• When receiving a call from the person whose picture is registered in the Contacts List, receiving display and the picture are displayed alternately.Rejecting an Incoming Call1. Press F or press and hold the side-up or side-down key whilst the phone is ringing to reject a call you do not wish to answer.Letting the Caller Know You are Unavailable1. Press [Busy] whilst the phone is ringing to send a busy tone to the caller of an incoming call letting them know that you cannot answer the call.Incall MenuYour phone has additional functions available whilst a call is in progress.Adjusting the Earpiece VolumeDuring a call, you can adjust the earpiece volume (and handsfree volume, if connected). 1. During a call, press the side-up or side-down key to display the Earpiece Volume screen.2. Press the side-up key or a to increase the volume of the call or press the side-down key or b to decrease the volume.Five levels (level 1 to 5) are selectable.3. Press when the volume is set to the desired level.The phone returns to the in-call screen automatically if left unoperated.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-21.png)
![Call Functions 21Putting a Call on HoldThis function allows you to manage two calls at the same time. If you wish to make another call whilst you are talking to someone, you can put the current call on hold to call someone else.To Make Another Call during a Call1. During a call, press [Options].2. Select “Hold”.The current call is put on hold.3. To retrieve a call, press [Options] and select “Retrieve”.4. Enter the phone number you wish to make another call to, then press D.Tip• You can also make another call by entering the phone number during a call instead of steps 1 and 2. The current call is automatically put on hold.Call WaitingThis service notifies you of another incoming call whilst you have a call in progress.1. During a call, press [Options] and select “Hold & Answer” to answer the second call.The first call is put on hold and you can now talk to the second caller.2. Press [Options] and select “Swap Calls” to switch between the two calls.3. Press [Options] and select “Release Call” to end the current call and return to the held call.Note• You need to set “Call Waiting” to “On” if you use the Call Waiting service (p. 92).• Call Waiting service may not be available on all networks. Contact your network operator for more information.• If you do not wish to answer the second call, press [Busy], or press [Options], and select “Busy” or “Reject”, in step 1. If “Reject” is selected, the call log of the second call is saved as a missed call.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-22.png)
![22 Call FunctionsAccessing SMS Menu During a Call1. During a call, press [Options] and select “Text”.The following options are available: “Create Message” to make an SMS, or “Inbox”, “Sent” or “Drafts” to access these folders. For details on SMS, see “Text (SMS)” on page 48.Conference CallConference call is a call with more than 2 participants. You may include up to 5 participants in a conference call.To Make a Conference CallTo make a conference call, you must have one active call and one held call.1. During a call, press [Options] and select “Multiparty” to answer the second call.2. Select “Conference All” to join the conference call.3. Press F to end the conference call.Note• Conference call service may not be available on all networks. Contact your network operator for more information.• You have more options for the Conference call in step 3:• To put all participants on hold, select “Conference Hold All”.• To put all participants except the current call on hold, select “Private”.• To end the call with all participants, select “Release All”.• To disconnect from the conference call but still allow the other participants to continue talking together, select “Transfer”.• To put the current call on hold and continue to have a conference call with the remaining participants, select “Exclude”.• To reject adding more participants to the current party, select “Reject”, or you can send the busy tone by selecting “Busy”.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-23.png)
![Call Functions 23To Add New Participants to the Conference Call1. Press [Options] and select “Dial”. 2. Enter the number you wish to include in the conference call and press D to dial.3. Press [Options] and select “Multiparty”. 4. Select “Conference All” to join the conference call.If you wish to add other participants, repeat steps 1 to 4.To End the Call with a Conference Call Participant1. During a conference call, highlight the person that you wish to disconnect from the conference call. 2. Press [Options] and select “Release Call”.To Have a Private Conversation with One of the ParticipantsIf you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold.1. During a conference call, select the person that you wish to talk to.2. Press [Options] and select “Multiparty”.3. Select “Private”.4. Once you have finished the private conversation, press [Options] and select “Multiparty”.5. Select “Conference All” to return to the conference call.Muting the Microphone1. During a call, press [Mute] to mute the microphone.To unmute the microphone, press [Unmute].](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-24.png)
![24 Entering CharactersEntering CharactersWhen entering characters to create Contacts List entries, text messages or multimedia messages, etc., press the corresponding keys.In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter “A” or twice for the letter “B”.Table of CharactersPressing each key scrolls characters in the following order. The order varies depending on the language selected.English ModeG-O: Press and hold to enter 0 - 9 numbers.QP: Press and hold to enter *.R: Press and hold to shift between multi-tap and T9 mode.Key Upper Case Characters Lower Case Characters NumericG. (full-stop) , (comma) - (hyphen) ? !’ (apostrophe) @ :1 1HABC2 abc2 2IDEF3 def3 3JGHI4 ghi4 4KJKL5 jkl5 5LMNO6 mno6 6MPQRS7 pqrs7 7NTUV8 tuv8 8OWXYZ9 wxyz9 9Q(space)+ = < > € £ $ ¥ % &0 0PSwitches character case among four modes: Abc, ABC, 123 and abc.R.,?!:;-+#*@' '' ( )_&€£$%/ ˜<>§=\ | ¥¿¡^[ ]{ }¤ÅÄÆå äæà ÇÉ è é ìÑñÖØöøòßÜüù∆ΦΓΛΩΠΨΣΘΞ (space) ↵Key Upper Case Characters Lower Case Characters Numeric](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-25.png)
![Entering Characters 25Changing the Input LanguagesYou can change the input language on the text entry screen.1. On the text entry screen, press [Options].2. Select “Input Language”.If “Input Language” is not displayed, select “Text Options” and then select “Input Language”.3. Select the desired language. Changing the Input MethodT9 Text InputT9 text input method is a shortcut to enter text easily and quickly. 1. On the text entry screen, press and hold R to enter T9 mode.2. Press [Options].3. Select “Input Method”.If “Input Method” is not displayed, select “Text Options” and then select “Input Method”.4. Select the input mode (Abc, ABC, abc, 123).5. Press each key once for any letter you require on that key.To enter the word “How”, press J L O.6. If the word shown isn’t the one you want, press a or b until you highlight the correct one.7. Press to select the word.Note• If the correct word is not shown in step 6, enter the correct word again after switching to the multi-tap input method.Tip• If you press Q instead of step 7, a space is inserted next to the selected word.Symbols and Punctuations1. On the text entry screen, press [Options].2. Select “Add Symbol”.If “Add Symbol” is not displayed, select “Text Options” and then select “Add Symbol”.3. Select the desired symbol.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-26.png)
![26 Entering CharactersMy DictionaryYou can create your own word list for T9 text input.1. On the text entry screen in T9 mode, press [Options].2. Select “My Dictionary”.If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”.3. Select “Add New Word” and enter a new word.To edit a word in the list1. On the text entry screen in T9 mode, press [Options].2. Select “My Dictionary”.If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”.3. Select the desired word.4. Press [Options] and select “Edit”.5. Modify the word.Using Text TemplatesYou can use the sentences registered in Text Templates when entering characters.For details on creating the text template, see “Adding Phrases to Text Templates” on page 63.1. On the text entry screen, move the cursor to the point you wish to insert the template. 2. Press [Options].3. Select “Text Template”.If “Text Template” is not displayed, select “Text Options” and then select “Text Template”.4. Select the desired text template.The selected text template is inserted.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-27.png)
![Contacts List 29Contacts List You can store the phone numbers and e-mail addresses of your friends, family and colleagues in the Contacts List.Your phone can store up to 640 phone numbers. In a Contacts List, you can store the following items.Items stored in the handset memoryFirst NameLast NameTel PrivateTel OfficeTel Mobile PrivateE-mail PrivateE-mail BusinessAddressNoteTip• There is no character limit for entering text into the above fields when using the internal memory.Items stored in the SIM memoryName: The number of characters that can be stored differs depending on the SIM card you use.Phone number: Up to 40 digitsUsing the infrared or Bluetooth wireless function, you can send the Contacts List entry to a PC to share the same entries.Selecting the Storage Memory“Contacts” → “Contacts List” → [Options] → “Advanced” → “Save New Contacts”1. Select Contacts location from “Handset Memory”, “SIM Memory” or “Choose before Saving”.Tip• “Choose before Saving” prompts you to choose the memory every time you save a new entry.Changing the List Displayed“Contacts” → “Contacts List” → [Options] → “Advanced” → “Contacts Location”1. Select from “Handset Memory”, “SIM Memory” or “Both”.(M 8-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-30.png)
![30 Contacts ListAdd New Contact You can choose either the phone or SIM card memory locations to store the new entry. For switching locations, see “Selecting the Storage Memory” on page 29.The amount of phone numbers that you can store to the SIM card is dependent on its capacity. Contact your network operator for details.“Contacts” → “Add New Contact”If you select the “Choose before Saving” option for the memory to be used, the selection is between “To Handset” and “To SIM”.1. Select the field you wish to fill in, and enter the relevant information.2. Press [Save] when finished.Tip• To create an entry, at least one field must be filled. If you create a new entry on the SIM card, you need to enter a phone number.Adding a Thumbnail to Entries“Contacts” → “Contacts List”1. Highlight the desired entry.2. Press [Options] and select “Edit”.3. Select “Picture”.4. Select the desired picture.5. Press [Save] when finished.Note• If you delete a picture in Saved Pictures, the corresponding thumbnail is also deleted.• If the picture size exceeds 120 dots (W) or 160 dots (H), specify the area you wish to display.Copying Contacts List Entries between SIM Card and Handset“Contacts” → “Contacts List” → [Options] → “Advanced” → “Copy All Entries”1. Select “From SIM to Handset” or “From Handset to SIM”.Note• When you insert the SIM card into your phone for the first time and start the Contacts List application, the confirmation screen appears automatically, asking you if you wish to copy or not. The number of Contacts List entries to be copied varies depending on the SIM capacity.(M 8-2)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-31.png)
![Contacts List 31Copying a Single Entry from Handset to SIM Card“Contacts” → “Contacts List”1. Select the desired entry.2. Highlight the desired phone number.3. Press [Options] and select “Copy to SIM”.Finding a Name and Number“Contacts” → “Contacts List”1. Enter the first few letters of the name.Search results are displayed in alphabetical order.2. Select the desired entry.Tip• You can select the Contacts location from “Handset Memory”, “SIM Memory” or “Both” before searching.• To view the details of the item such as address, highlight the desired item, press [Options]and select “View”.Dialling from the Contacts List“Contacts” → “Contacts List”1. Highlight the desired entry and press D.Tip• You can also dial the desired phone number by pressing the digit key corresponding to the position the entry is on the list.• If more than one phone number is registered for the entry, select the desired phone number after step 1 and press D.• You can also dial from the details screen of the Contacts List. On the details screen, select the desired phone number and press D.• If you select “SIM Memory” for the “Contacts Location” option in Contacts List menu (p. 29), only one phone number entry is displayed.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-32.png)
![32 Contacts ListEditing Contacts List Entries“Contacts” → “Contacts List” → [Options] → “Edit”1. Select the field you wish to edit, and modify the information.2. Press [Save] when finished.Deleting Contacts List EntriesDeleting All Contact Entries“Contacts” → “Contacts List” → [Options] → “Advanced” → “Delete All Entries”1. Enter your handset code.2. Select “Handset Entries” or “SIM Entries”.The default handset code is “0000”. For details on changing the handset code, see “To Change Handset Code” on page 101. Deleting a Contact Entry“Contacts” → “Contacts List”1. Highlight the desired entry.2. Press [Options] and select “Delete”.Viewing GroupsYou can set group icons when storing Contacts entries so that you can easily find and edit them.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Group” → “View Groups”1. Select the desired group.“ ” appears next to the selected group. Select the group again to cancel, and the checkbox becomes unchecked.Tip• Press [Options] and select “Current Only” to view only the selected group or “Select All” to view all groups.Group CallDifferent ringtones can be set for each group. When you purchase this phone, groups are set to off. If you do not set a group ringtone, the ringtone assigned in the Settings menu is used.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Group” → “Group Call”1. Select the desired group.2. Select “Switch On/Off”.3. Select “On” or “Off”.4. Select “Assign Ringtone”.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-33.png)
![Contacts List 335. Select “Preset Sounds” or “My Sounds”.6. Select the desired ringtone. For details on selecting a ringtone, see “Assigning Ringtone” on page 85. 7. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 85.8. Press [OK].Assigning a Ringtone to Each Contacts List EntryA specified ringtone or vibration setting can be associated to a pre-registered entry.“Contacts” → “Contacts List”1. Select the desired entry.2. Press [Options] and select “Edit”.3. Press [Options] and select “Ringtone”.4. Select “Switch On/Off”.5. Select “On” or “Off”.6. Select “Assign Ringtone”.7. Select “Preset Sounds” or “My Sounds”.8. Select the desired ringtone.For details on selecting a ringtone, see “Assigning Ringtone” on page 85. 9. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, “Vibration” on page 85.10.Press [OK].11.Press [Save]. Memory StatusThis function helps you to check the number of entries stored in the Contacts List.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Memory Status”Speed Dial ListYou can set a maximum of 9 phone numbers in the Speed Dial List (p. 82).](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-34.png)
![34 Contacts ListSetting Contacts List Entries in the Speed Dial List“Contacts” → “Contacts List”1. Select the desired entry.2. Highlight the desired phone number.3. Press [Options] and select “Add to Speed Dial”.4. Select the desired list number.Tip• The nine digit keys correspond to list numbers.• To view the speed dial list, see page 82.Sending a Contacts List Entry“Contacts” → “Contacts List”1. Highlight the desired entry.2. Press [Options] and select “Send Contact”.3. Select “Via Bluetooth” or “Via Infrared”.The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres or an infrared-enabled device within 20 centimetres.The connection will be established and the entry will be sent. Receiving a Contacts List EntryWhen the phone receives a Contacts List entry, a confirmation message appears in the stand-by mode screen.1. Press [Yes].The received entry is registered in the Contacts List. Press [No] to reject.Tip• For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on page 95.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-35.png)
![Camera 35Camera Your phone has an integrated digital camera. This allows you to take and send pictures or video clips wherever you are.Take Picture Put the phone into the digital camera mode to take a picture. Pictures are saved in Saved Pictures in JPEG format in the following three picture sizes.L: 480 × 640 dotsM: 240 × 320 dotsS: 120 × 160 dotsTaking Pictures“Camera” → “Take Picture” The preview is displayed through the screen.1. Press or the Camera key to take the picture.The shutter sounds and the still image of the taken picture is displayed. Press [Cancel] to retake a picture.2. Press [Save].“Saving (file name) to My Items…” is displayed, then the picture is registered.3. Press F to return to stand-by.Remaining shots indicator123: Indicates the remaining number of pictures that can be taken.Tip• Pressing the Camera key during stand-by also activates digital camera mode.• If you wish to send a picture by multimedia message after taking the picture, press before step 2. Then select “Multimedia” or “MMS Postcard”. (MMS Postcard service may not be available on all networks. Contact your network operator for more information.) Large MMS messages may cause the size of attached pictures to be reduced.Using the Full ScreenThe preview can be displayed on the full screen without the soft key area. “Camera” → “Take Picture” → [Options] →“Full Viewfinder”1. Select “On” or “Off”.(M 5)(M 5-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-36.png)
![36 CameraTaking a Self-PortraitTo take a self-portrait, hold the phone with the mirror facing you whilst holding the phone at least 40 cm away. Press or the Camera key to take the picture. Using the Zoom FunctionPress c or d to change the zooming ratio.Zooming ratio indicators: Magnification.Note• When “Picture Size” is set to “S”, the zoom function has 3 magnifications (×1, ×2, ×4).• When “Picture Size” is set to “M”, the zoom function has 2 magnifications (×1, ×2).Selecting the Picture Size“Camera” → “Take Picture” → [Options] → “Picture Size”1. Select the desired picture size.Selecting the Picture Quality“Camera” → “Take Picture” → [Options] → “Picture Quality”1. Select “Normal” or “Fine”.Picture quality indicators:Fine:NormalSelecting the Anti-flicker Mode“Camera” → “Take Picture” → [Options] → “Anti-flicker” 1. Select “Mode1” or “Mode2”.Note• Vertical stripes may occur on the picture due to the light source. Change the mode to rectify.• The digital camera uses a C-MOS sensor. Although this camera has been manufactured to the highest specifications, some pictures may still appear too bright or too dark.• If the phone has been left in a hot place for a long time before taking or registering a picture, the picture quality may be poor.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-37.png)
![Camera 37In the Case of No Available MemoryWhen the number of pictures that can be taken becomes 3 or less, the remaining shots indicator in the upper left of the screen turns red. (The number of pictures that can be taken is approximate.)Even if the number of pictures that can be taken becomes 0, you can continue to take and save pictures until the message, “Memory full. Please delete some data!” appears. After which, you can save the picture.Adjusting the Brightness of the Picture According to Lighting ConditionsPress a or b to adjust the brightness of the picture.Picture brightness (exposure level) indicators : (Bright → Normal → Dark)Once the phone has returned to the stand-by screen, the brightness settings return to default.Viewing the Taken Pictures“Camera” → “Take Picture” → [Options] → “My Pictures”The list of pictures is displayed.1. Select the file you wish to view.The selected picture is displayed.Tip• Your pictures are given file names which are “pictureNNN.jpg” (NNN is a consecutive number).The file name (without an extension), date and size of your pictures are displayed in the list.Using the Timer (Delay Timer)“Camera” → “Take Picture” → [Options] → “Delay Timer”1. Select “On” or “Off”.“ ” or “ ” is displayed on the screen and the phone returns to digital camera mode.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-38.png)
![38 Camera2. Press or the Camera key to start the delay timer.10 seconds after the timer sounds, the shutter sounds, and the camera takes a picture.Note• The countdown sounds whilst the delay timer is operating.• If or the Camera key is pressed whilst the delay timer is operating, the picture is taken instantly.• The zoom function with c or d, or brightness adjustment of the picture with a or b, is unavailable whilst the delay timer is operating.• If you wish to stop taking pictures with the timer, press [Cancel] whilst the delay timer is operating.Continuous ShotFour pictures are taken in succession. Auto Shot and Manual Shot are available.Continuous Shot indicators “Camera” → “Take Picture” → [Options]→ “Continuous Shot”1. Select “Auto Shot” or “Manual Shot”.Select “Off” to cancel.2. Press or the Camera key to start Continuous Shot.Auto Shot: Four pictures are taken in a row.Manual Shot: Pictures are taken one by one by pressing or the Camera key.The taken pictures are saved automatically.To stop Continuous Shot, press [Cancel].Note• When “Picture Size” is set to “L” or “M”, you cannot use the Continuous Shot.• When you select a frame for taking pictures, you cannot use the Continuous Shot function.• Delay timer cannot be used with the Manual Shot.:When pictures are taken in Continuous Shot mode, these indicators appear on the screen.* When delay timer and Continuous Shot functions are simultaneously set, “ ” is displayed instead.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-39.png)
![Camera 39Selecting a FrameYou can select the frame from preset patterns. You can also select a frame in Saved Pictures.“Camera” → “Take Picture” → [Options] → “Add Frame”1. Select “Preset Frame” or “My Pictures”.2. Select the desired frame.The selected frame is confirmed on the display.3. Press .Note• When “Picture Size” is set to “L”or “M”, you cannot use the Frame function.• When you activate the Continuous Shot, you cannot use the Frame function.• Only the images of PNG format can be selected as the frame if you select “My Pictures” in step 1.Selecting the Shutter SoundYou can select the shutter sound from 3 preset patterns.“Camera” → “Take Picture” → [Options] → “Shutter Sound”1. Select the desired shutter sound.To play back the shutter sound, press [Play].Record Video Put the phone into the video camera mode to record a video.Video clips are saved in “.3gp” format in the following two modes:Record time indicators: Message sending mode enabled: Extended video mode enabledRecording Video ClipsSound can be recorded with the video clip.“Camera” → “Record Video”The preview is displayed through the screen.1. Press or the Camera key to start recording the video clip.The sound for recording the video clip occurs.If you press or the Camera key again, or when the recording is completed, the sound for ending the video clip recording occurs and the display transits to step 2.(M 5-2)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-40.png)
![40 Camera2. Select “Save”.“Saving (file name) to My Items…” is displayed, then the video clip is registered.To preview a video clip before saving, select “Preview”.To send a video clip by multimedia message after recording the video clip, select “Save and Send”.To record a voice clip again, press [Cancel].Remaining sets indicator123 : Indicates the remaining sets of video clips that can be recorded.Using the Zoom FunctionPress c or d to change the zooming ratio.Zooming ratio indicators: Magnification.Selecting the Recording Size ModeYou can select the recording size mode.“Camera” → “Record Video” → [Options] → “Record Size”1. Select “Extended Video” or “For Message”.Note• If “For Message” is selected, the size of the video clip that can be recorded depends on the message size set in MMS settings (p. 47). • “Save and Send” is not displayed after recording in extended video mode. • This option is not applicable to some service providers. Please contact your service provider for more information.Selecting Video Quality“Camera” → “Record Video” → [Options] → “Video Quality”1. Select “Normal” or “Fine”.Video quality indicators:Fine:Normal](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-41.png)
![Camera 41In the Case of No Available MemoryWhen the number of video clips that can be recorded becomes 3 or less, the remaining sets indicator in the upper left of the screen turns red. (The number of sets that can be recorded is approximate.)Even if the number of video clips that can be recorded becomes 0, you can continue to record and save video clips until the message, “Memory full. Please delete some data!” appears. After which, you can save the video clip.Adjusting the Brightness of the Video Clips According to Light ConditionsPress a or b to adjust the brightness of the video clip.Picture brightness (exposure level) indicators : (Bright → Normal → Dark)Once the phone has returned to the stand-by screen, the brightness settings return to default.Viewing Recorded Video Clips“Camera” → “Record Video” → [Options] → “My Videos”The list of video clips is displayed.1. Select the file you wish to view.2. Press .The selected video clip is played back.To pause playback, press .To resume playback, press again.To stop playback, press [Back].Tip• Your video clips are given file names such as “videoNNN.3gp” (NNN is a consecutive number). The file name (without an extension), date and size of your video clips are displayed in the list.• If the video clip has been recorded with sound, the volume can be adjusted by pressing a or b, or the side-up or side-down key.• The volume varies depending on the Multimedia Volume settings (p. 87). The volume is 0 when “Multimedia Volume” is set to “Silent”.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-42.png)
![42 CameraUsing the Timer (Delay Timer)To Record a Video Clip with the Timer“Camera” → “Record Video” → [Options] → “Delay Timer”1. Select “On” or “Off”.“ ” is displayed on the screen and the phone returns to video camera mode.2. Press or the Camera key to start the delay timer.10 seconds after the timer sounds, the camera starts recording the video clip.Note• The countdown sounds whilst the delay timer is operating.• If or the Camera key is pressed whilst the delay timer is operating, the video clip is recorded instantly.• The zoom function with c or d, or brightness adjustment of the video with a or b, is unavailable whilst the delay timer is operating.• If you wish to stop recording video clips with the timer, press [Cancel] whilst the delay timer is operating.Recording Video Clips with Sound“Camera” → “Record Video” → [Options] → “Voice Record”1. Select “On” or “Off”.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-43.png)
![Messages 43Messages Your phone allows you to send and receive text or multimedia and to receive WAP alerts.Multimedia (MMS) About Multimedia MessagingMultimedia Messaging Service (MMS) allows you to send and receive multimedia messages with graphical images, photographs, sound, animations or video clips attached.Note•Some MMS functions may not always be available depending on your network. Contact your network operator for more information.Creating a New MMS A → “Multimedia” → “Create Message”1. Enter the message.To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Text Options”. Select “Text Template” and then select the desired template.2. Enter the phone number or e-mail address of the recipient.3. Select “Send”.After the message is sent, the message is moved to the Sent box.Note• The current message size displayed whilst you are creating the message is an approximation.• If a message cannot be sent for some reason, the message stays in the Outbox and “ ” is displayed on the stand-by screen.Tip• You can use the phone number or e-mail address from the Contacts List. (p. 31) • To save the message without sending, select “Save to Drafts” instead in step 3 .• To enter the subject, select “Subject” in step 3 and enter it. This is optional. Up to 40 characters as the subject (and up to 20 characters (for To and Cc)) can be entered. However, these may be limited depending on your network. In this case, you may not be able to send MMS. Contact your network operator for more information.(M 4)(M 4-2)(M 4-2-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-44.png)
![44 Messages• To add more recipients, select “Add Contact” in step 3. Select “To” or “Cc” and select the desired number of the recipient. Then enter the phone number or e-mail address.To Send a Message Template MMSYour phone provides message templates with an image and voice attachment that help you create easily.A → “Multimedia” → “Create Message” → [Options] → “Message Template”A confirmation screen asking whether you wish to discard the current text is displayed.1. Confirm by selecting [Yes] or [No].2. Select the desired template.3. Enter the message.4. Enter the phone number or e-mail address of the recipient. 5. Select “Send”.Note• Selecting “Message Template” deletes messages or images you have entered or attached. To prevent deletion, select “Message Template” first, then enter messages.Turning the Slide Show Setting On or OffA → “Multimedia” → “Settings” → “Slide Show”1. Select “On” or “Off”.If You Select “On”• You can create messages which have up to 10 slides. Each slide can contain one picture, one sound file and up to 1000 characters of text (up to the message total 30 Kbytes or 100 Kbytes limit).• If you wish to add a slide to a single slide, press [Options] and select “Add Slide”. If you wish to perform slide operations for multiple slides, press [Options] and select “Slide Control”.The slide control options available are:Add: To add a new slide.Remove: To remove the active slide.Previous: To navigate to the previous slide.Next: To navigate to the next slide.• Video clip data cannot be attached as slide data to the message.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-45.png)
![Messages 45If You Select “Off”• You can attach a maximum of 20 pictures, sounds or video clips and up to 2000 characters of text (up to the message total 30 Kbytes or 100 Kbytes limit).Inserting Attached DataYou can send pictures, sounds and video clips saved in the handset memory attached to multimedia messages. When attaching video clips, “Slide Show” must be set to “Off”.A → “Multimedia” → “Create Message”1. Press [Options] and select from “Picture”, “Sound” or “Video”.2. Select the desired file name.The selected picture/sound/video clip is attached.When attaching is complete, press [Back] to return to the message creation screen.• To add more files, press [Options] and select from “Add Picture”, “Add Sound” or “Add Video”. Then select the desired file. • To remove the attached files, press [Options] and select “Remove”. Reading MMSMessages you receive are stored in the Inbox.Incoming MessagesThe MMS indicator ( ) will appear when you are receiving an incoming message.A → “Multimedia” → “Inbox”1. Select the message you wish to view.The message is displayed.2. Scroll the screen to read the message.3. Press when finished.Tip• The volume varies depending on the Multimedia Volume settings (p. 87). The volume is 0 when “Multimedia Volume” is set to “Silent”.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-46.png)
![46 MessagesStoring the Phone Number or E-mail Address of a Sender in the Contacts ListA → “Multimedia” → “Inbox”1. Highlight the message from which you want to store the phone number or e-mail address.2. Press [Options] and select “Save Sender”. For details on entering a name, see “Add New Contact” on page 30.Retrieving MMSWhen “ ” is in the Inbox, the following can be done.A → “Multimedia” → “Inbox”1. Highlight the alert you wish to download.2. Press [Options] and select “Download”. Tip• You can press instead of steps 1 and 2 to start downloading.Confirming Arrival of Delivery ReportA → “Multimedia” → “Sent”1. Highlight the message of which you wish to confirm arrival of delivery report.2. Press [Options] and select “Delivery Report”. This menu is available only for sent messages that have the “Delivery Report” set to “On”. For details on selecting “Delivery Report”, see “Setting Up MMS”.Setting Up MMSA → “Multimedia” → “Settings”1. Select the item you wish to set up. • Roam. Download (Immediate, Deferred):Controls MMS download timing when roaming outside of your network.• Delivery Rep. Allow (On, Off):Enables or disables Delivery Report when receiving a message which applies to the Delivery Report function.• Anonymous Reject (On, Off):Rejects a messages from an unknown or empty address name or not.• Auto Delete (Off, Inbox, Sent, Both):Deletes the oldest message automatically, when the Inbox, Sent or Both (Inbox and Sent) is full.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-47.png)
![Messages 47• Slide Show (On, Off):Enables or disables Slide Show when sending a message.• Message Size (30KB, 100KB):Sets the maximum message size that can be sent.•Advanced• Priority:Prioritises composed messages.• Delivery Report:Enables Delivery Report.• Expiry Time:Sets Expiry Time for a message to be stored in the Server.• Sender Visibility:Displays the information about the sender.• Slide Interval:Sets the slide display time when sending a message.2. Change each item.Sending a Picture File with MMS PostcardYour phone allows you to send multimedia messages to a Vodafone specific postcard service centre that prints the picture and mail it to the recipient’s home address specified in the MMS message. (Your phone is initially provided with the address of a Vodafone specific Postcard service centre, and its address cannot be changed.)MMS Postcard service may not be available on all networks. Contact your network operator for more information.To Create a New MMS Postcard (M 4-2-2)A → “Multimedia” → “MMS Postcard”1. Select a picture you wish to use for a postcard.2. Enter your message.3. Enter the following information for the recipient.See the note below for details.•Name •Postcode• Additional Info • County / City•House No. / Street •Country4. Press [Options] and select “Send”.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-48.png)
![Messages 49Creating and Sending a New SMS A → “Text” → “Create Message”1. Enter your message. To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Text Template” and then select the desired template. 2. Enter the phone number of the recipient.3. Select “Send”.The phone begins the sending process and the SMS is sent. After the message has been sent, the message is added to the Sent box.To save the message in the Drafts box without sending it, select “Save to Drafts”. Note• When you send a message of more than 160 characters, the confirmation message is displayed. Tip• You can use the phone number from the Contacts List. (p. 31)• To add more recipients, select “Add Contact” in step 3. Select an item number for adding the recipient’s phone number. Then enter the phone number.Reading SMSIncoming MessagesThe SMS indicator ( ) will appear when an incoming message arrives.1. When you receive a SMS, press during stand-by.2. Select the message you wish to view.The sender’s phone number and a part of the message are displayed. When the sender’s phone number is stored in the Contacts List, the sender’s name is displayed instead of the phone number.Massages that are marked with “ ” denote unread massages. If the Inbox, Sent box or Drafts box is full, “ ” is displayed. Delete unnecessary massages.3. Scroll the screen to read the message.4. Press F when finished.(M 4-3-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-50.png)
![50 MessagesExtracting Phone Numbers from the Received Messages and Making a CallYou can make a call using the phone number embedded in the received SMS message.A → “Text” → “Inbox”1. Select the message from which you wish to extract phone numbers. 2. Press [Options] and select “Extract Numbers”.Telephone numbers embedded in the message are displayed. 3. Highlight the phone number.4. Press [Options] and select “Make Call”.To save this phone number in the Contacts List, select “Save Number”. Setting Up SMS To Set Up the Service Centre AddressA → “Text” → “Settings” → “Message Centre”1. Enter the centre phone number.If you wish to enter a country code for a message to an international number, press and hold P until a “+” sign is displayed.Message LifetimeThis indicates the number of days and hours for which a message you send may remain undelivered to the message recipient.During this period, the message service centre will continually try to deliver the message to the recipient.A → “Text” → “Settings” → “Message Lifetime”1. Select the validity period.Message FormatA → “Text” → “Settings” → “Message Format”1. Select the message format.Connection TypeA → “Text” → “Settings” → “Connection Type”1. Select the connection type.(M 4-3-5)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-51.png)
![54 Vodafone live!Navigating a WAP Page•a b c d:Move the highlights around in the screen.• : Executes the option displayed in the lower centre of the screen.•A: Launches browser option menu.•C: Selects an action displayed in the lower right corner of the screen.Used to access “Vodafone live!” by opening the browser.•Q (press and hold):Starts the “Go to URL”.•G to O (press and hold):Starts the Bookmark (WAP).•F: Exits the browser (short press).Turns off the phone. (press and hold)Browser MenuWhen you are browsing, you can reach browsing options by pressing [Options].• Select:Selects the link you wish to see. (“Select” is displayed only when the link is highlighted.)•Home:Goes to the homepage you set in the WAP Settings.• Add bookmark:Adds the site you are currently browsing to your list of bookmarks.• View bookmarks:Displays a list of bookmarks.• Save items:Saves pictures, sounds or video clips in the appropriate My Items folder.•Go to URL:Inputs the URL of the site you wish to go to.•History:Displays a history list.• Forward:Moves to the next URL in the history list.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-55.png)
![Vodafone live! 55• Reload page:Refreshes the contents of the WAP page.• Advanced...:• Show URL:Displays the URL of the site you are currently browsing.• Save page:Saves the page you are currently browsing to your list of Snap Shots.• Snapshots:Displays a list of Snap Shots.• Alert inbox:Displays a list of WAP push messages. You can receive push messages via WAP Services. This means that a service provider sends WAP content to your phone, without any set up.• Settings:Includes “Downloads”, etc.• Security:Sets the security.• Clear...:Clears history, cache, etc.• Restart Browser:Restarts the browser.BookmarksWhen you are browsing, press [Options] and select the appropriate option. To Add a Bookmark1. Select “Add bookmark”.To Access Bookmarked Pages1. Select “View bookmarks”.2. Select the desired bookmark.To Edit Bookmarks1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to edit.4. Press [Options] and select “Details”. 5. Edit the title, then press b.6. Edit the URL, then press b.7. Select “Save”.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-56.png)
![56 Vodafone live!To Delete Bookmarks1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to delete.4. Press [Options] and select “Delete”. 5. Press [Options] and select “OK”.Setting the Hotkeys to Web Page BookmarksYou can access Web pages quickly by pressing the shortcut keys (hotkeys). Follow the following to assign shortcuts.1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to edit.4. Press [Options] and select “Hotkeys”.The list of hotkeys is displayed. 5. Select the number to which you wish to assign hotkeys.The list of registered bookmarks is displayed.6. Select the desired bookmark.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-57.png)
![My Items 57My Items My Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and accessed WAP pages (addresses) which you can use. You can also transmit picture, sound and video clip data via infrared or Bluetooth wireless technology to OBEX-enabled phones. Pictures Pictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed.: PNG format: JPEG format: GIF format:BMP format:WBMP format: WPNG formatNote• The phone can store approximately 1.8 Mbytes of data across Pictures, Games & More, Sounds and Videos.Viewing Pictures“My Items” → “Pictures” → “Saved Pictures”1. Select the file you wish to view. The selected picture is displayed.Using Images as Wallpaper“My Items” → “Pictures” → “Saved Pictures”The list of pictures is displayed.1. Highlight the file you wish to use as wallpaper. 2. Press [Options] and select “Set as Wallpaper”. 3. Specify the area you wish to display using the navigation keys.(M 6)(M 6-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-58.png)
![58 My ItemsSaving to Contacts ListYou can use this option only for pictures saved in the handset memory. “My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to add to Contacts List.2. Press [Options] and select “Add to Contact”. To overwrite, select “Existing Contact” and select the data you wish to save to.If the picture size exceeds 120 dots in width or 160 dots in height, specify the area you wish to display. To save as a new entry, select “New Contact”. For details on entering a name, see “Add New Contact” on page 30.Editing Pictures“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to edit.2. Press [Options] and select “Edit”.3. Select the desired option: “Rotate”: The picture is rotated 90º anticlockwise. Press [Rotate] again for another 90º.“Adjust Size”: Select the desired option.“Retouch”: Select the retouching option.“Add Frame”: Select the desired frame pattern. “Add Stamps”: Press [Stamps] and select the desired stamp pattern. Repeat this step to add more patterns. Note• The size of pictures that you can rotate or add a frame to is 120 dots [W] × 160 dots [H] or 160 dots [W] × 120 dots [H] maximum.• The size of pictures that you can retouch is 26 dots [W] × 26 dots [H] minimum and 120 dots [W] × 160 dots [H] or 160 dots [W] × 120 dots [H] maximum.• The size of pictures that you can add stamps to is 12 dots [W] × 12 dots [H] minimum and 120 dots [W] × 160 dots [H] or 160 dots [W] × 120 dots [H] maximum.• “Adjust Size” may not be available depending on the original picture and copyright issued.Sending a Picture File“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to send.2. Press [Options] and select “Send”. 3. Select “As Multimedia” or “As Postcard”.For details on creating a message, see “Creating a New MMS” on page 43.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-59.png)
![My Items 59Note• Pictures with a faint icon cannot be sent attached to a message.• MMS Postcard service may not be available on all networks. Contact your network operator for more information.Tip• For details on transmitting My Items data, see “Sending My Items Data to OBEX-enabled Phones” on page 63.Uploading Picture FilesYou can upload your pictures to the Media Album. This option may not be available on all networks. Contact your network operator for more information.“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.4. Press [Yes].Downloading Picture Files “My Items” → “Pictures” → “More Pictures”The picture file download site is displayed.Games & More Along with the preloaded application, downloaded applications are stored in Applications.Note• Applications can store up to 50 applications.Using ApplicationsVarious kinds of Vodafone specific applications can be used in this phone.To use applications, download the applications via the mobile Internet. Some applications offer the ability to connect to a network either within a game or network based application.Note• Applications may be both localised (no connectivity) and network based (using the mobile Internet to update information/play games). The network may charge you more for using network-based applications. Please contact your service provider for more information.(M 6-1-3)(M 6-2)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-60.png)
![60 My ItemsDownloading ApplicationsConfirmation ScreenBefore downloading the application you are asked to confirm what you are about to receive.After checking the information on the confirmation screen, the application can be downloaded.Note• User authentication may be required before downloading the application on some information screens.Executing Applications “My Items”→ “Games & More” → “Applications”Downloaded applications are sequentially displayed from the latest one.1. Select the title of the application you wish to execute.The selected application is executed.When using network connection type applications, connection to the network can be selected.2. To end the application, press F and select [End].More Games “My Items” → “Games & More” → “More Games” 1. Select the application you wish to download.After a WAP browser is displayed variously, the confirmation screen will appear after a whilst.2. Press [Get] to start downloading.3. Press [OK] when finished.Sounds The ringtones created using the Melody Editor and the AMR data recorded by Voice Recorder are managed in Saved Sounds. The default ringtones are not contained within Saved Sounds.:SMAF format: Original ringtone (composed in Melody Editor): Standard MIDI format: i Melody format: WAVE format: AMR formatTip• SMAF (Synthetic music Mobile Application Format) is a format of music data for mobile phones.(M 6-2-1)(M 6-2-2)(M 6-3)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-61.png)
![My Items 61Playing Back Sound Files“My Items” → “Sounds” → “Saved Sounds”1. Select the file you wish to play back.To stop playback, press .Note• This option may not be available in all regions.Using the Sound Files as Ringtone“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to use as ringtone.2. Press [Options] and select “Set as Ringtone”. The selected sound is automatically used for the ringtone of the current Profiles.Note• Files in AMR or WAVE format cannot be used for the ringtone.• The volume varies depending on the Multimedia Volume settings (p. 87). The volume is 0 when “Multimedia Volume” is set to “Silent”.Sending a Sound File with MMS“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to send.2. Press [Options] and select “Send”. 3. Select “As Multimedia”.If you select your original ringtone in step 1, perform the following.4. Select the file format “SMAF”, “MIDI” or “i Melody”.For details on creating a message, see “Creating a New MMS” on page 43. Note• Sounds with a faint icon cannot be sent attached to a message.• Only the first part of the data is converted if you select “i Melody” in step 4.Uploading Sound FilesYou can upload your sounds to the Media Album. This option may not be available on all networks. Contact your network operator for more information.“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.If you select your original ringtone in step 1, perform the following.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-62.png)
![62 My Items4. Select the file format “SMAF”, “MIDI” or “i Melody”.Downloading Sound Files “My Items” → “Sounds” → “More Sounds”The sound file download site is displayed.Videos Video clips that are recorded by a video camera or video clips that are downloaded from mobile Internet sites can be managed.Tip• The volume varies depending on the Multimedia Volume settings (p. 87). The volume is 0 when “Multimedia Volume” is set to “Silent”.Playing Back Video Clip Files“My Items” → “Videos” → “Saved Videos”1. Select the file you wish to play back.2. Press .To resume, press again.To stop playback, press [Back].Sending a Video Clip File with MMS“My Items” → “Videos” → “Saved Videos”1. Highlight the file you wish to send.2. Press [Options] and select “Send”. 3. Select “As Multimedia”.For details on creating a message, see “Creating a New MMS” on page 43. Note• Video clips with a faint icon cannot be sent attached to a message.Uploading Video Clip FilesYou can upload your video clips to the Media Album. This option may not be available on all networks. Contact your network operator for more information.“My Items” → “Videos” → “Saved Videos”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.4. Press [Yes].Downloading Video Clip Files “My Items” → “Videos” → “More Videos”The video clip file download site is displayed.(M 6-3-4)(M 6-4)(M 6-4-3)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-63.png)
![My Items 63Sending My Items Data to OBEX-enabled PhonesChoose the appropriate menu. “My Items” → “Pictures” → “Saved Pictures”“My Items” → “Sounds” → “Saved Sounds”“My Items” → “Videos” → “Saved Videos”1. Highlight the desired file. 2. Press [Options] and select “Send”.3. Select “Via Bluetooth” or “Via Infrared”.The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres, or an infrared-enabled device within 20 centimetres. When an infrared-enabled device is detected, the infrared connection is established and the entry is sent.When Bluetooth wireless technology enabled devices are detected, a list of enabled devices is displayed.4. Select the desired Bluetooth wireless technology enabled device. The connection is established and the entry is sent.Note• You can send a maximum of 100 Kbyte data.Receiving the My Items Data When the phone receives the My Items data, a confirmation message appears in the stand-by mode screen.1. Press [Yes].The received entry is registered in the corresponding My Items folder. Tip• For details on Infrared or Bluetooth wireless settings, see “Connectivity” on page 95. Text Templates You can register up to 20 text templates for use in text messages and multimedia messages.120 characters may be registered in any text template.Adding Phrases to Text Templates“My Items” → “Text Templates”1. Select the number you wish to register. 2. Enter the text and press .(M 6-5)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-64.png)
![64 My ItemsEditing Text Templates“My Items” → “Text Templates”1. Highlight the number you wish to edit. 2. Press [Options] and select “Edit”.3. Enter new text and press .Viewing Text Templates“My Items” → “Text Templates”The list of Text Templates is displayed.1. Highlight the number you wish to view. 2. Press [Options] and select “View”.Deleting Text Templates“My Items” → “Text Templates”1. Highlight the text template you wish to delete. 2. Press [Options] and select “Delete”.Memory Status This function helps you to check the memory status of My Item. Memory status covers Applications, Pictures, Sounds, and Videos.“My Items” → “Memory Status”(M 6-7)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-65.png)
![Games & More 65Games & More Applications The list of Java™ applications is displayed.Downloaded applications are displayed in order starting from the latest one.Executing ApplicationsFor details on executing applications, see “Executing Applications” on page 60. Setting PermissionWhen using applications that access the network, you may need online security against data theft or tampering especially for monetary transactions. With this option, you can set the confirmation method when the Java™ application accesses the network. To Select the Function and Confirmation Method“Games & More” → “Applications”1. Highlight the desired Java™ application.2. Press [Options] and select “Permission”.3. Select “Net Access” to access billing data on the network. 4. Select the desired confirmation method.Always Connect: Allows the Java™ application access without confirmation.First Time: Informs you when the Java™ application uses the function for the first time. If allow is selected, no more confirmations are made until you delete the application.Per Session: Informs you when the Java™ application uses the function for the first time. If allow is selected, no more confirmations are made until the application finishes operation.Per Access: Informs you every time the Java™ application uses the function regardless of whether or not you select allow or deny. Never Connect: Prevents the Java™ application from using the functions and no confirmation is made. (M 1)(M 1-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-66.png)
![66 Games & MoreTo Reset PermissionsYou can reset all permissions you made“Games & More” → “Applications”1. Highlight the desired Java™ applications.2. Press [Options] and select “Reset Permissions”.Screensavers You can download screensaver applications for the stand-by screen. “Games & More” → “Screensavers” → “Switch On/Off”1. Select “On” or “Off”.Note• If you select “On” and a screensaver application is not set, a list displaying available screensavers appears, asking you to make a selection.Setting the Screensaver “Games & More” → “Screensavers” → “Set Application”The downloaded screensaver applications are displayed. 1. Select the desired screensaver application.Set Network Access You can set how and whether to connect to the network or not using the screensaver application.“Games & More” → “Screensavers” → “Set Network Access”1. Select from “Always Connect”, “Default Settings” or “Never Connect”.Note• Changes made to the above setting whilst the application is suspended are made effective by restarting the application.• You may not be able to make the above settings depending on your network.(M 1-2)(M 1-2-2)(M 1-2-3)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-67.png)
![Games & More 67Resume Time You can set the time period for the screensaver application to activate.“Games & More” → “Screensavers” → “Resume Time”1. Enter the resume time in two digits using the digit key.More Games You can download applications.“Games & More” → “More Games”The application download site is displayed.1. Select the application you wish to download.After a WAP browser is displayed variously, the confirmation screen will appear after a whilst.2. Press [Get] to start downloading.3. Press [OK] when finished.Settings Calls & Alarms You can set the priority of incoming calls and alarms whilst an application is operating.“Games & More” → “Settings” → “Calls & Alarms”1. Select “Incoming Call” or “Alarm”.2. Select methods.• “Call Priority” or “Alarm Priority”:The application is suspended automatically, and you can receive a call, or the alarm will sound. After finishing the call or the alarm ends, the suspend icon ( ) is displayed letting know there is a suspended application.• “Call Notice” or “Alarm Notice”:The marquee (character scrolls) is displayed on the first line of the screen whilst the application continues. If you press D, the application is suspended, and you can receive a call. After finishing the call, the suspend icon ( ) is displayed letting know there is a suspended application.(M 1-2-4)(M 1-3)(M 1-4)(M 1-4-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-68.png)
![70 ApplicationsApplications SIM Application You can refer to the information on the SIM. Contact your service provider for further details.Alarms Setting the AlarmsThe alarm function allows you to be alerted at a specified time.Note that the alarm may not function correctly if the clock has not been set. “Applications” → “Alarms”1. Select the blank setting.2. Enter the desired time.To Change the Type of Alarm Tone3. Select “Set Alarm Tone”.4. Select “Tone”.5. Select “Preset Sounds” or “My Sounds”.6. Select the desired tone.For details on selecting a ringtone, see “Assigning Ringtone” on page 85.To Change the Vibration of Alarm Tone7. Select “Vibration”.8. Select “On”, “Off” or “On & Link to Sound”.To Change the Duration of Alarm Tone9. Select “Duration”.10. Enter the desired time (02-59).11. Press [Back].To Set the Repeating Option12. Select “Repeat Daily”.13. Select “On”.14. Press [Save].(M 3)(M 3-1)(M 3-2)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-71.png)
![Applications 71Editing the Alarm Setting“Applications” → “Alarms”1. Select the desired setting and edit it. Resetting an Alarm Setting“Applications” → “Alarms”1. Select the alarm you wish to reset.2. Select “Reset Alarm”.Resetting All Alarm Settings“Applications” → “Alarms”1. Select “Clear All”.Calculator The calculator function performs the 4 arithmetic calculations using up to 12 digits.“Applications” → “Calculator” → “Calculator”The calculator is displayed on the display.Key operations for calculation are as follows.To enter a decimal point, press R.To clear the entered number or operand, press [Clear].To do the calculations, press .To start a new calculation, press [Clear].(M 3-3)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-72.png)
![72 ApplicationsRate Conversion You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter.To Set a Currency Conversion Rate“Applications” → “Calculator” → “Exchange Rate”1. Select “Foreign -> Domestic” or “Domestic -> Foreign”.2. Enter the currency conversion rate.To delete all digits, press [Clear].To Convert a Value“Applications” → “Calculator” → “Calculator”1. Enter the value to be converted.2. Press [Options] and select “In Domestic” or “In Foreign”.The result is displayed.If you select “Exchange Rate” in step 2, you can set a currency conversion rate.Note• You cannot perform step 1 when an arithmetic symbol (+, –, × or ÷ ) is displayed.Voice Recorder This allows you to record a voice clip of up to 60 seconds, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is registered in Saved Sounds. Voice clips are saved in “.amr” format.Recording a Voice Clip“Applications” → “Voice Recorder”1. Press to start recording.To stop recording before the recording time is over, press .2. Select “Save” to save the voice clip. To play back the recorded voice clip, select “Playback”. To record a voice clip again, press [Cancel] .Note• To change recorded size before recording, press [Options] and select “Record Size”. Then select “Extended Voice” or “For Message”.(M 3-3-2) (M 3-4)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-73.png)
![74 Applications4. Press the digit keys to specify the musical scale and rest.For details on specifying the sound level and rest, see “To Specify the Musical Scale and Rest” on page 75.5. Press P or R to specify the types of musical notes or rest.For details on specifying the musical notes and rest, “To Specify the Types of Notes and Rests” on page 75.6. Press d after inputting one note.Input the next note after the cursor moves to the right.7. Repeat steps 5 and 7 to input notes.When entering notes, you can do the following:• Press to play back all input notes.• Press [Options] and select:“Play before cursor” to play back notes up to the cursor position.“Select Part” to select another chord.“Set Tone” to set or change the tone using different instruments. (p. 76)“Set Strength” sets the strength of the original ringtone. (p. 76)• To specify the types of notes or rests, see page 75.8. When you finish inputting, press [Options] and select “Save”.9. Select “Save to My Items”.Note• If the capacity or memory in Saved Sounds becomes insufficient, the message, “Maximum capacity : 200 Not registered.” or “Not registered. Memory full.” is displayed. The screen returns to step 9. Try again after deleting unnecessary data.• Melodies consisting of too many short notes (semiquavers and triplets) cannot be played back in step 8 and the following message is displayed: “Can not play due to too many notes per sec.” The screen returns to step 5. The message “Can not save due to too many notes per sec.” may also be displayed, and the screen returns to step 5.Reduce the number of melodies, replace short notes, cancel triplets, etc. to remedy.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-75.png)
![76 ApplicationsIf the cursor is positioned next to a note, you can repeat the note immediately left of the cursor when a or b is pressed.To Set the ToneThe phone can play notes using different instruments.You can select from 128 basic tones (8 types of: Pianos, Chimes, Organs, Guitars, Basses, Strings 1, Strings 2, Brasses, Reeds, Flutes/Pipes, Synth Leads, Synth Pads, Synth Effects, Ethnics, Percussions, and Effects) and 61 extended tones (40 types of Drums FM and 21 types of Drums WT).1. Press [Options] and select “Set Tone” in step 8 on page 74. 2. Press c or d to highlight a category of the tone.3. Press a or b to highlight a tone.4. Press . Now you can create a melody.Tip• You can play back the melody in the selected tone by pressing [Options] and select “Play Current Part”, or play back the syllable names in the selected tone by selecting “Confirm Tones” instead.To Set the Strength of the Original RingtoneThe strength of the original ringtone can be set in 3 levels for each melody.When you purchase this phone, the strength of the original ringtone is set to “Loud”.1. Press [Options] and select “Set Strength” in step 8 on page 74.2. Select a strength of the tone.3. Press .Now you can create an original ringtone.Editing Original Ringtones “Applications” → “Melody Editor” → “My Sounds”1. Highlight an original ringtone you wish to edit. 2. Press [Options] and select “Edit Melody”.3. Edit the title.4. Select a tempo and number of voices.(M 3-5-2)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-77.png)
![Applications 775. Edit the data. 6. When you finish editing, press [Options] and select “Save”.7. Select “Save to My Items”.8. Select “Overwrite” or “New”.Note• When the number of voices is modified in step 5, the confirmation message may be displayed. When you press [Yes], a section of the melody may be deleted.Tip• You can delete the melody after or before the cursor by pressing [Options] and selecting “Del. after cursor” or “Del. before cursor”.Copying and Pasting NotesYou can copy and move a part of the melody to another position.Only original ringtones or editable melodies can be copied or moved.1. In the Score input screen, press [Options] and select “Copy” or “Cut”.2. Move the cursor to the first note to be copied or to be cut. 3. Move the cursor to the last note to highlight the area.4. Press [Options] and select “Paste”. 5. Move the cursor to the point you wish to paste the notes.Phone Help You can view the help list and use it to guide you in the phone’s functions.“Applications” → “Phone Help”1. Highlight the desired function.(M 3-6)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-78.png)
![78 CalendarCalendar Calendar allows you to easily schedule appointments or events, which are associated with the date and time.These entries can also be sent via infrared or Bluetooth wireless technology to a PC to share the same schedules.Creating a New Entry“Calendar”1. Highlight the desired day to which you want to add an event.2. Press [Options] and select “New Entry”.3. Select from “Appointment”, “All Day Event” or “Anniversary”.To Set an Appointment1. Enter the subject, start time and end time.2. Select the reminder option.3. Select and set “Tone”, “Vibration” or “Duration”.4. Enter the location.5. Press [Save].To Set an All Day Event1. Enter the subject, date and location.2. Press [Save].To Set an Anniversary1. Select the anniversary option from “Ann by date” or “Ann by day”.2. (For “Ann by date”)Enter the subject, date (month and day) and location.(For “Ann by day”)Enter the subject, date (day of the week, week number and month) and location.(M 7)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-79.png)
![Calendar 79Sending a Schedule Entry“Calendar”1. Select the day including schedule entries you wish to send.2. Select “Via Bluetooth” or “Via Infrared”.The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres, or an infrared-enabled device within 20 centimetres.When an infrared-enabled device is detected, the infrared connection is established and the entry is sent.When Bluetooth wireless technology enabled devices are detected, a list of enabled devices is displayed.3. Select the desired Bluetooth wireless technology enabled device.The connection is established and the entry is sent.Tip• You do not need to enter your passcode in step 3.• For details on Infrared or Bluetooth wireless settings, see “Connectivity” on page 95.Viewing an Entry“Calendar”1. Select the day you wish to view.The day view is displayed.To Search By Date1. In the monthly or daily view, press [Options].2. Select “Go to”. 3. Select “Today” to display today or “Enter date” to enter the desired date.To Search By Subject1. In the monthly or daily view, press [Options].2. Select “Find”.3. Enter the desired text.To Change the Week Format 1. In the monthly view, press [Options].2. Select “Week Format”.3. Select “Monday-Sunday” or “Sunday-Saturday”.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-80.png)
![80 CalendarDeleting Entries1. In the monthly or daily view, press [Options].2. Select “Delete”.3. Select the desired option.• “This Appointment”:(daily view only) Deletes the selected appointment.• “All this Day”: Deletes all entries for the selected day.• “All this Month”: Deletes all entries for the selected month.• “Up to Last Month”:Deletes all entries from the last month to the selected month.• “All Schedules”: Deletes all entries in this application.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-81.png)
![Contacts 81Contacts Call Log The phone will record the last 10 missed calls, received calls and dialled numbers.Viewing Call Log“Contacts” → “Call Log”1. Select from “All Calls”, “Dialled Numbers”, “Missed Calls”, or “Received Calls”.The selected call log list is displayed.2. Select the phone number you wish to view.If you wish to dial the number, press D.Call log “1” is the most recent. When you press b, call log “2” is displayed.Tip• You can also confirm call logs by pressing D during stand-by mode.Sending Messages1. In call log list, highlight the call log you wish to send a message to.The selected call log is displayed in detail.2. Press [Options] and select “Create Message”. 3. Select “Multimedia” or “Text”. For details on creating a message, see “Creating a New MMS” on page 43 or “Creating and Sending a New SMS” on page 49.Deleting a Call Log1. In call log list, press [Options] and select “Delete”.(M 8)(M 8-3)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-82.png)
![84 SettingsSettings Profiles Tone sound and vibration set can be customised for each profile according to your environment.There are 6 profiles including one user definable profile: Normal, Meeting, Activity, Car, Headset and Silent.Activating a Profile“Settings” → “Profiles”1. Select the desired profile.Note• When a profile is set, the corresponding icon described on page 15 is displayed on the stand-by screen. Tip• Press and hold R to switch Profiles settings between Normal and Silent mode during stand-by. Customising Profiles“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select the setting you wish to customise and change as desired.For details about settings, pages 84 to 88.4. Press [Save] when finished.Resetting Profile Settings“Settings” → “Profiles”1. Highlight the profile you wish to reset.2. Press [Options] and select “Set to Default”.3. Enter your handset code.The default handset code is “0000”. For details on changing the handset code, see “To Change Handset Code” on page 101.Ringer VolumeYou can adjust the ringer volume to one of 6 levels or a step tone.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.(M 9)(M 9-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-85.png)
![Settings 853. Select “Ringer Volume”.The current volume level is displayed.4. Press a to increase the ringer volume or press b to decrease the ringer volume and then press .To select “Step Tone”, press a at level 5.To select “Silent”, press b at level 1.Assigning RingtoneYou can select the ringtone from 28 tones including 5 patterns, 13 sound effects and 10 melodies. You can also select a sound in Saved Sounds as the default ringtone excluding the AMR or WAVE format. “Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Assign Ringtone”.4. Select “Preset Sounds” or “My Sounds”.5. Select the ringtone you wish to use.To hear the demo play, press . To stop playing, press again.6. Press [Options] and select “Assign”.Note• If you delete a ringtone that uses a sound in Saved Sounds, the default ringtone is set.VibrationWhen the vibrator option is set on, the phone will vibrate for incoming calls regardless of the ringer volume and tone settings.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Vibration”.4. Select from “On”, “Off” or “On & Link to Sound”.Tip• When the “On & Link to Sound” option is selected in step 4, the vibrator synchronises with your selected melody to pulse in time with the melody. Please note that not all melodies support the “On & Link to Sound” option. Should you select such a melody, only the “On” option in step 4 will allow vibrator function.• When you select “On” or “On & Link to Sound” in step 4, “ ” is displayed on the stand-by screen.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-86.png)
![86 SettingsAlertsYou can personalise profiles for alerts including warning tone, message alert and low battery alert.Warning ToneYour phone emits the warning tone when an error occurs.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Alerts”.4. Select “Warning tone”.5. Select “Switch On/Off”.6. Select “Volume” and select from “High”, “Middle” or “Low”.7. Select “Tone” and select “Preset Sounds” or “My Sounds”.8. Select “Duration” and select the desired time. Message AlertWhen receiving messages, special ringtones can be set.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Alerts”.4. Select “Message Alert”.5. Select from “Multimedia”, “Text” or “WAP”. 6. Select “Volume” and select the desired volume.7. Select “Sound” and select “Preset Sounds” or “My Sounds”.8. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.9. Select “Duration” and select the desired time.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-87.png)
![Settings 87Keypad TonesWhen the keypad tone is set on, you will hear a confirmation tone each time you press any keys. “Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Keypad Tones”.4. Select “Switch On/Off” and select “On”. Select “Off” to cancel.5. Select “Volume” and select from “High”, “Middle” or “Low”.6. Select “Tone” and select from “Preset Sounds”, “My Sounds” or “Default Tone”.When selecting “Default Tone”, go to step 8.7. Select the desired tone.For details on assigning the tone, see “Assigning Ringtone” on page 85.8. Select “Duration” and select the desired time.Multimedia VolumeYou can adjust volume for Video Camera, Voice Recorder, Melody Editor, My Items, browser and multimedia messages. “Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Multimedia Volume”.The current volume level is displayed.4. Press a to increase the volume or press b to decrease the volume and then press .To select “Silent”, press b at level 1.Power On Sound / Power Off SoundThe phone can be set to emit a sound when it is switched on or off. You can define the volume, duration and the melody to be used for this task.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Power On Sound” or “Power Off Sound”.4. Select “Volume” and select the desired volume.5. Select “Sound” and select “Preset Sounds” or “My Sounds”.6. Select “Duration” and select the desired time.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-88.png)
![88 SettingsEcho ReductionThis function is for reducing irritating echoes, especially when using the handsfree car kit. “Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Echo Reduction”.4. Select “On” or “Off”.Any Key AnswerYou can also answer a call by pressing any key except F or [Busy]. For details, see page 19.“Settings” → “Profiles”1. Select the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Any Key Answer”.4. Select “On” or “Off”.Setting the Display You can change the settings of the screen.WallpaperFor the stand-by screen, 3 pictures are provided.Pictures taken with the digital camera or images downloaded from a WAP site can be used for wallpapers.Setting My Pictures“Settings” → “Display” → “Wallpaper” → “My Pictures”1. Select the desired picture. 2. After displaying the picture, press .3. Specify the area you wish to display using the navigation keys.Note• Some pictures cannot be used because of their picture and data types.(M 9-2)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-89.png)
![Settings 93• Bar if Abroad: Restricts all incoming calls when you are outside of the coverage from your registered network operator.3. Select one of the following options.• “All Services”: Restricts all services.• “Voice Calls”: Restricts all voice calls.• “Data”: Restricts all data calls.• “Fax”: Restricts all fax calls.• “Messages”: Restricts all messages.• “All except msgs”: Restricts all services except messages.4. Select “On” or “Off”.5. Enter the network password.To Cancel Settings“Settings” → “Call Settings” → “Restrict Calls”1. Select “Outgoing Calls” or “Incoming Calls”.2. Select “Cancel All”.3. Enter the network password. Fixed Dialling No.When the Fixed Dialling No. is enabled, you can only call predefined numbers.To Enable Fixed Dialling No.“Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.”1. Enter your PIN2 code.2. Select “Switch On/Off”.3. Select “On” or “Off”.To Add a New Name“Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.”1. Enter your PIN2 code.2. Select “Edit Dial List”.3. Press [Options] and select “Add New Contact”.4. Add a name and a phone number.For details on adding a name and a phone number, see “Add New Contact” on page 30.5. Press [Save].](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-94.png)
![Settings 95Setting the Time Zone“Settings” → “Date & Time” → “Time Zone” → “Change Zone”1. Press c or d to select the home city to set.Customising the Time Zone“Settings” → “Date & Time” → “Time Zone” → “Set Custom Zone”1. Enter the time-zone differences using the digit keys.Pressing P switches between – and +.Changing the Language You can change the language that the phone uses to display messages.“Settings” → “Language”1. Select the desired language.Tip • You can also change the input language on the text entry screen (p. 25).Note• If you select “Automatic” in step 1, the language preset on the SIM card is selected.• If the language preset on the SIM card is not supported, then the default language of the phone is selected.Connectivity By using this menu, you can connect your phone to a Bluetooth wireless technology enabled device via the connection, or to a PC via the Infrared connection or a USB cable.Using the Bluetooth Wireless Function To Turn On or Off“Settings” → “Connectivity” → “Bluetooth” → “Switch On/Off”1. Select “On” or “Off”.If the infrared setting has been activated, you will be asked whether you wish to deactivate it or not. Press [Yes].The Bluetooth wireless setting is activated, and “ ” is displayed on the stand-by mode screen.(M 9-6)(M 9-7)(M 9-7-1)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-96.png)
![96 SettingsTo Search for Devices to be PairedFor using the Bluetooth wireless function, you need to search for other Bluetooth wireless technology enabled devices to establish contact with your phone. Keep your phone within a distance of 10 metres before searching.“Settings” → “Connectivity” → “Bluetooth” → “Search for Devices”The phone starts searching for devices within 10 metres.1. Select the desired device for pairing.2. Enter the device passcode.Note• If the Bluetooth wireless function is off before searching, the phone turns the Bluetooth wireless function on automatically and starts searching.• If the infrared function is active, the confirmation screen to deactivate the infrared function is displayed. Press [Yes] to deactivate. • You can only select one device for pairing. To change the paired device, see “Paired Devices”.Paired DevicesYou can activate, rename, and delete the paired device in the list.To Activate a Device“Settings” → “Connectivity” → “Bluetooth” → “Paired Devices”1. Select the device you wish to activate.Tip • You can save battery power by turning the Bluetooth wireless function off whilst it is not in use. Turn the Bluetooth wireless function off in “To Turn On or Off” on page 95 or in “To Turn Off Automatically”.• During a call, you can divert voice call to the paired device. Press [Options] and select “Enable Bluetooth”. If you wish to disconnect the paired device, select “Disable Bluetooth”. To Rename a Device“Settings” → “Connectivity” → “Bluetooth” → “Paired Devices”1. Highlight the device you wish to rename.2. Press [Options] and select “Change Name”.3. Rename the device.](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-97.png)
![Settings 97To Clear a Device Name“Settings” → “Connectivity” → “Bluetooth” → “Paired Devices”1. Highlight the device you wish to clear.2. Press [Options] and select “Delete”.Bluetooth Wireless SettingsYou can prevent other GX15 phones from recognising your phone, or turn the Bluetooth wireless function off automatically to save battery power. To Show or Hide Your Phone“Settings” → “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Visibility”1. Select the desired visibility settings:“Show My Phone”: Allows other devices to recognize your phone.“Hide My Phone”: Hides your phone from other devices.To Turn Off Automatically “Settings” → “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Bluetooth Time Out”1. Select the desired time.Your phone turns the function off automatically for the specified time.Using the Infrared FunctionTo Turn the Infrared Function On or Off (M 9-7-2)“Settings” → “Connectivity” → “Infrared”1. Select “On” or “Off”.If the Bluetooth wireless function has been activated, you will be asked whether you wish to deactivate it or not. Press [Yes].“ ” will appear on the screen. The infrared setting will return to off when no data is transmitted/received via infrared communication.PC SoftwareBy connecting your phone to a PC, you can transmit pictures, sounds, video clips, and Contacts List entries. Follow the procedure to select the connection method (Bluetooth wireless, USB or Infrared connection). For details on getting the link software, see page 103. “Settings” → “Connectivity” → “PC Software”1. Select the desired connection type from “Data Cable”, “Infrared” or “Bluetooth”.(M 9-7-3)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-98.png)
![100 SettingsTo Activate the WAP/MMS Profile“Settings” → “Network”1. Select from “WAP Settings” or “MMS Settings”.2. Highlight the desired profile.3. Press [Options] and select “Activate”.To Edit the WAP/MMS Profile“Settings” → “Network”1. Select from “WAP Settings” or “MMS Settings”.2. Highlight the desired profile.3. Press [Options] and select “Edit”.4. Edit the desired item and select [Save].To Copy the WAP/MMS Profile“Settings” → “Network”1. Select from “WAP Settings” or “MMS Settings”.2. Highlight the desired profile.3. Press [Options] and select “Copy”.4. Edit the new profile name.To Delete the WAP/MMS Profile“Settings” → “Network”1. Select from “WAP Settings” or “MMS Settings”. 2. Highlight the desired profile.3. Press [Options] and select “Delete”.Security Auto Keypad Lock By setting this option on, your phone will lock the keypad in 20 seconds automatically if no operation is performed.“Settings” → “Security” → “Auto Keypad Lock”1. Select “On” or “Off”.Enabling/Disabling the PIN Code If the PIN code is enabled you are asked to enter the PIN code each time the phone is switched on. Your PIN code is stored on the SIM card and you should have been made aware of the code when you purchased the SIM card. Contact your service provider for further details.“Settings” → “Security” → “PIN Entry”1. Select “On” to enable the PIN code.Select “Off” to disable it.2. Enter your PIN code.(M 9-9)(M 9-9-1)(M 9-9-2)](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-101.png)
![Connecting GX15 to Your PC 103Handset ManagerYou can transmit the following items between your phone and your PC, and can use Contacts List entries on your PC.• My Items entries• Contacts List entries• Short messagesTo use the Handset Manager function, see “PC Software” on page 97 and set your phone to Data Transfer mode. For details on software support, refer to the following site:http://www.sharp-mobile.comSoftware Installation1. Insert the supplied CD-ROM into your CD-ROM drive.The GX15 CD-ROM screen is displayed.If the GX15 CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM.2. Press the desired button.The installation starts. 3. Follow the on-screen instructions to complete installation.NoteInfrared communication• Infrared ports need to be aligned with each other.Infrared port](https://usermanual.wiki/Sharp/HRO00035/User-Guide-421073-Page-104.png)
