Sharp HRO00042 PCS Cellular Phone W/ Bluetooth User Manual 050901 gx40 e link
Sharp Corporation PCS Cellular Phone W/ Bluetooth 050901 gx40 e link
Sharp >
User Manual
Declaration of Conformity
Hereby, Sharp Telecommunications of Europe Limited,
declares that this GX40 is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
A copy of the original declaration of conformity can be
found at the following Internet address:
http://www.sharp-mobile.com
Introduction 1
Introduction
Congratulations on your new GX40 phone.
About This User Guide
This user guide is carefully designed to help you learn about
your phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate
permanent written records of all important data. Data
may be lost or altered in virtually any electronic
memory product under certain circumstances.
Therefore, we assume no responsibility for data lost
or otherwise rendered unusable, whether as a result of
improper use, repairs, defects, battery replacement,
use after the specified battery life has expired or any
other cause.
• We assume no responsibility, directly or indirectly,
for financial losses or claims from third parties
resulting from the use of this product and any of its
functions, such as stolen credit card numbers, the loss
or alteration of stored data, etc.
• All company and/or product names are trademarks
and/or registered trademarks of their respective
holders.
• Screen layout may differ from that illustrated in this
user guide.
The information described in this user guide is
subject to change without notice.
• All the functions described in this user guide may not
be supported by all networks.
• We assume no responsibility for downloaded
contents, information, etc. from the network.
• Occasionally, a few black or bright pixels may appear
on the screen. Please note that this will not have any
impact on any of the features or on performance.
Copyright
According to copyright laws, the reproduction,
alteration and use of material which is protected by
copyright (music, pictures, etc.) is only permitted for
personal or private use. If the user is not in possession
of more extensive copyright or has not received the
explicit permission from the copyright owner to
reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation
of the copyright laws and gives the copyright owner the
right to claim for damages. For this reason, avoid the
illegal use of material which is protected by copyright.
Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
2 Introduction
Powered by JBlend™ Copyright
1997-2005 Aplix Corporation. All rights
reserved.
JBlend and all JBlend-based trademarks
and logos are trademarks or registered
trademarks of Aplix Corporation in Japan
and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI
Corporation
©2002-2005 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one
or more of the following United States Patents and/or their
domestic or foreign counterparts and other patents
pending, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450: 4,811,420: 5,228,056: 5,420,896: 5,799,010:
5,166,951: 5,179,571 & 5,345,467
T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928, and 6,011,554; Australian Pat. No. 727539;
Canadian Pat. No. 1,331,057; United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842
463 (96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB;
Republic of Korea Pat. Nos. KR201211B1 and
KR226206B1; and additional patents are pending
worldwide.
miniSD™ is a trade mark of SD Card Association.
is a registered trademark of RealNetworks, Inc.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sharp is
under license. Other trademarks and trade names are
those of their respective owners.
CP8 PATENT
Introduction 3
This product is licensed under the MPEG-4 Visual Patent Portfolio
License for the personal and non-commercial use of a consumer
to (i) encode video in compliance with the MPEG-4 Video Standard
(“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was
encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a licensed video
provider. No license is granted or implied for any other use.
Additional information may be obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent
Portfolio License for encoding in compliance with the MPEG-4
Systems Standard, except that an additional license and payment
of royalties are necessary for encoding in connection with (i) data
stored or replicated in physical media which is paid for on a title by
title basis and/or (ii) data which is paid for on a title by title basis
and is transmitted to an end user for permanent storage and/or
use. Such additional license may be obtained from MPEG LA,
LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
Useful Functions and Services
Your phone offers you the following features:
• 3D and colour Java™ games. You can also download various games
and applications from Vodafone live! portal.
• Thin Film Transistor (TFT) colour LCD main display with images that
are clearer and easier to view.
• A built-in digital camera for taking pictures and video clips.
• A message function for reading and creating SMS messages.
• MMS (Multimedia Messaging Services) for personalising your phone
in various ways.
• Email for sending up to 300 KB and receiving mail with attachments.
• A colour WAP browser for accessing information on Vodafone live!
portal.
• Your own ringtones and ringvideos. You can use sound or video clip
files as a ringtone or ring video clip.
• A music player that can play back MP3, MPEG-4, 3GPP and REAL-
AUDIO format sound files (support codec of MPEG-4 or 3GPP are
AMR, AAC and AAC+).
• Playback of the downloaded sound and video clip files.
• A voice recorder function for recording and playing back voice clips.
• A Bluetooth® wireless technology interface for establishing contact
and transmitting data with certain devices. You can transmit pictures,
sounds, and video clips to OBEX-enabled phones.
• A data synchronisation function for updating Contacts List entries on
the Internet.
• A schedule alarm for creating and sending schedule entries with alarm
settings.
• A miniSD™ memory card slot that expands connectivity with a PC
using the memory card.
4
Contents
Introduction ................................................. 1
Your Phone .................................................. 7
Optional Accessories ................................... 7
Getting Started ............................................ 8
Inserting the SIM Card and the Battery .... 10
Removing the SIM Card and the Battery .. 11
Charging the Battery ................................. 12
Inserting the Memory Card ....................... 13
Removing the Memory Card ..................... 14
Turning Your Phone On and Off ............... 14
Keypad Lock ............................................. 15
Display Indicators (Main Display) ............ 15
Display Indicators (External Display) ....... 17
Navigating Functions ................................ 18
Voice Call Functions ................................. 19
Making a Voice Call ................................. 19
Speed Dialling ........................................... 20
Redialling .................................................. 20
Answering a Voice Call ............................ 20
In Call Menu .............................................. 21
Entering Characters ..................................24
Changing the Input Language .................... 25
Changing the Input Mode .......................... 25
My Dictionary ............................................ 26
Using Templates ........................................ 26
Using the Menu ..........................................27
Main Menu ................................................ 27
Contacts List ..............................................28
Changing the Name Order ......................... 28
Changing the List Displayed .................... 28
Selecting the Storage Memory ................. 29
Sorting the Contacts List Entries .............. 29
Saving an Unregistered Number ............... 29
Add New Contact ...................................... 29
Viewing My Contact Details ..................... 30
Copying Contacts List Entries between
SIM Card and Handset .............................. 30
Finding a Name ......................................... 30
Dialling from the Contacts List ................. 30
Editing Contacts List Entries ..................... 31
Assigning a Ringtone or a Ring Video Clip
5
to Each Entry ............................................. 31
Deleting Contacts List Entries ................... 32
Manage Category .......................................32
Contact Groups .......................................... 33
Memory Status ........................................... 33
Speed Dial List ..........................................34
Sending a Contacts List Entry ...................34
Receiving a Contacts List Entry ................ 34
Sending a Voice Clip Message or Video
Clip Message Using an Address from the
Contacts List ..............................................35
Synchronising Contacts List Entries with
those on the Internet ................................... 35
Dialling a Service Phone Number ............36
Camera ....................................................... 37
Taking Pictures .......................................... 37
Recording Video Clips .............................. 37
Common Functions in the Photo and
Video Camera Modes ................................38
Functions in the Photo Camera Mode .......40
Functions in the Video Camera Mode .......42
Messaging .................................................. 43
SMS ...........................................................43
MMS ..........................................................43
Email ..........................................................43
Creating a New Message ............................44
Vodafone Messenger ..................................51
Messaging Settings ....................................56
Vodafone live! ............................................60
Navigating a WAP Page ............................61
Music .......................................................... 64
Music Player ..............................................64
FM Radio ...................................................68
My Items .....................................................73
Pictures .......................................................73
Music & Ringtones ....................................74
Videos ........................................................75
Themes .......................................................76
Other Documents .......................................76
Common Option Menus .............................77
Games & Applications ............................81
Text Templates ...........................................81
Memory Status ...........................................81
Entertainment ............................................82
Games & Applications ..............................82
Settings .......................................................85
6
Video ......................................................... 87
Calendar ..................................................... 91
Organiser & Tools ..................................... 96
Alarms ....................................................... 96
Calculator .................................................. 98
Voice Recorder .......................................... 99
E-Book .................................................... 100
Stopwatch ................................................ 101
Tasks ........................................................ 101
World Clock ............................................ 103
Countdown Timer ................................... 104
Expenses Memo ...................................... 104
Phone Help .............................................. 105
SIM Application ....................................... 106
Settings .................................................... 107
Phone Settings ......................................... 107
Connectivity ............................................ 120
Call Settings ............................................ 125
Network Settings ..................................... 130
Call Log .................................................... 135
Call Timers .............................................. 136
Data Counter ........................................... 136
Call Costs ................................................ 136
Connecting GX40 to Your PC .................138
System Requirements .............................. 138
GSM/GPRS Modem ................................ 138
Handset Manager ..................................... 139
Music Manager ........................................ 139
Sync Manager .......................................... 141
Software Installation ................................ 142
Troubleshooting ......................................143
Safety Precautions and
Conditions of Use ....................................145
CONDITIONS OF USE .......................... 145
ENVIRONMENT .................................... 149
PRECAUTIONS CONCERNING
VEHICLE USE ........................................ 149
SAR ......................................................... 150
INFORMATION ON
PROPER DISPOSAL .............................. 150
PRECAUTIONS FOR USE IN USA ...... 152
Index .........................................................154
List of Menu Functions ...........................157
Your Phone 7
Your Phone
Please check the following carefully. Your phone
should come complete with:
• GSM 900/1800/1900 GPRS phone
• Rechargeable Li-ion Battery
• AC Charger
• Stereo Hands-free Kit
•USB Data Cable
•CD-ROM
• miniSD Memory Card*
•User Guide
• Quick Start Guide
* These items are not provided in some areas.
Optional Accessories
• Li-ion Spare Battery (XN-1BT30)
• Cigarette Lighter Charger (XN-1CL30)
• USB Data Cable (XN-1DC30)
• AC Charger (XN-1QC30, XN-1QC31)
• Audio Remote-Controller (XN-1AR90)
• Handsfree Microphone Unit (XN-1HU90)
• Stereo Headset (XN-1HS90)
The above accessories may not be available in all
regions.
For details, please contact your dealer.
8 Getting Started
Getting Started
21
18
19
20
16
17
15
1
9
4
11
10
5
6
7
8
12
13
22
23
24
2
3
14
Getting Started 9
1. Earpiece
2. Navigation Keys (Arrow Keys):
Moves cursor to highlight a
menu item, etc.
Up/Down arrow keys:
a b
Displays Contacts List
entries in standby.
Left arrow key:
c
Displays the message inbox
in standby.
Right arrow key:
d
Displays the monthly or
weekly calendar in standby.
3. Centre Key: Displays Main menu in
standby, and executes
functions.
4. Left Soft Key:
A
Executes the function in the
lower left of the screen.
Displays Messaging menu
in standby.
5. Send/Redial Key:
D
Makes or accepts calls,
displays the call logs in
standby.
6. Voicemail Key:
G
Press and hold to connect to
the Voicemail centre.
(Depending on the SIM
card.)
7. * /Shift Key:
P
Switches character case
between four modes: Abc,
ABC, 123 and abc on the
text entry screen.
Press to enter P, ?, – or * in
standby.
Press and hold in standby to
lock the keypad.
8. Microphone
9. Main Display
10.Right Soft Key:
C
Executes the function in the
lower right of the screen.
Accesses “Vodafone live!”
by opening the browser in
standby.
11.End/Power Key:
F
Ends a call and turns power
on/off.
12.Keypad
13.#/Silent Key:
R
Displays symbol screen on
the text entry screen.
Press and hold to switch
languages on the text entry
screen. Press and hold in
standby to switch Profiles
settings between the mode
most recently activated and
Silent mode.
10 Getting Started
Inserting the SIM Card and the
Battery
1. Slide off the battery cover ( ).
2. Slide the SIM card into the SIM holder.
14.Built-in Aerial: Warning: Do not cover the
hinge area of the phone
with your hand when in use
as this may interfere with
the performance of the
built-in aerial.
15.Camera
16.RF Connector
17.Battery Cover
18.External Display
19.Audio Keys: Controls Music Player and
FM radio when the phone is
closed.
20.Speaker
21.Handsfree/Microphone Connector
22.Side Keys (V/W): Moves the highlight up or
down.
Press in standby or during a
call to increase or decrease
the earpiece volume.
23.Memory Card Slot
24.
External Connector
:
Used to connect either the
charger or a USB data cable.
SIM card
Getting Started 11
3. Hold the battery so that the metal contacts of the
battery are facing down, slide the guides on the top
of the battery into the battery slots , and then
insert it .
4. Replace the battery cover.
Note
• Make sure that only 3V SIM cards are used.
• Make sure that the standard accessory battery
(XN-1BT30) is used.
Removing the SIM Card and the
Battery
1. Ensure that the phone is turned off and that the
charger and other accessories are disconnected.
Slide off the battery cover.
2. Lift the battery using the protruding edge and
remove the battery from the phone.
3. Hold down gently while sliding the SIM card
out of the SIM holder .
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points
concerning battery disposal:
• Take the used battery to your local waste depot,
dealer or customer service centre for recycling.
• Do not expose the used battery to a naked flame,
immerse in water or dispose with the household
waste.
12 Getting Started
Charging the Battery
You must charge the battery for at least XXX minutes
before using your phone for the first time.
Using the Charger
1. Open the cover of the external connector, connect
the charger to the external socket located at the
bottom of the phone by pressing both sides
indicated with arrows, and connect to an AC outlet.
When the phone is charging, the animated battery
status icon ( ) in the upper right of the screen
displays the current status.
Standard charging time: Approx. XXX minutes
Note
• Charging time may vary depending on the state of the
battery and other conditions. (See “Battery” on
page 146.)
To Disconnect the Charger
When charging is complete, the battery indicator icon
displays the full charge status.
1. Unplug the charger from the AC outlet, then unplug
the charger connector from the phone.
2. Close the cover.
Note
• Do not use any non-approved chargers as they may
damage your phone and invalidate any warranties,
see “Battery” on page 146 for details.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power
for charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right
of the main and the external displays.
Getting Started 13
Low Battery during Use
When the battery is running low, an alarm will sound
and “ ” is displayed on the main and external
displays.
If you are using your phone and you hear the low
battery alarm, attach your charger as soon as possible.
The phone may not be able to continue normal
operation if you continue to use it.
Inserting the Memory Card
1. Turn off the phone.
2. Open the memory card slot cover and insert the card
with the label side facing up.
3. Insert the memory card all the way in until it clicks.
4. Close the cover.
Note
• Make sure that the phone is turned off before
inserting the memory card.
• Be sure to insert the card in the correct direction and
orientation.
• Do not open the memory card cover while the
memory card is being formatted or written to. The
card may be damaged beyond use.
• Keep all memory cards out of the reach of small
children.
Battery Indicators Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
14 Getting Started
Tip
• You see the following indicators when the memory
card is in use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
: Appears when the card is being written or read.
: Appears when the card is being formatted.
Removing the Memory Card
1. Open the memory card slot cover and slightly push
the card so it pops out. Remove the card and close
the cover.
Note
• Make sure that the phone is turned off before
removing the memory card.
• Do not remove the memory card while the memory
card is being formatted or written to.
Turning Your Phone On and Off
To turn the power on or off, press and hold F for
approximately 2 seconds.
To Enter the PIN Code
If activated you are asked to enter a PIN (Personal
Identification Number) code and handset lock code
after turning on your phone.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press .
Note
• If your PIN code is entered incorrectly three times in
a row, the SIM card is locked. See “Enabling/
Disabling the PIN Code” on page 118.
• If the clock settings have not been entered, the date
and time entry screen is displayed (p. 116).
Getting Started 15
To Copy All Contacts List Entries from the SIM
Card
When you insert the SIM card into your phone for the
first time and start the Contacts List application, you are
asked whether you wish to copy Contacts List entries
on the SIM card. Follow the on-screen instructions, or
you can do it later using the Contacts List menu as
follows:
“Contacts”
→
“Manage Contacts”
→
“Copy All
Entries”
1. Select “From SIM to Handset”.
Keypad Lock
You can lock the keypad to prevent it from being
pressed accidentally.
Locking the Keypad
1. Press and hold P in standby.
To unlock, press and hold P.
Tip
• Emergency numbers (112, etc.) can be entered and
dialled regardless of the keypad lock.
Display Indicators (Main Display)
1. / : Strength of received signal/Service out
of range
/ :GPRS enabled/GPRS disabled
: Roaming outside network
2. : Flight mode
3. : Data exchange with external device
4. / : Connection to the server [established/
communicating]
5. / : Voice call [incoming/in progress]
16 Getting Started
6. / / : Alerts [text message and multimedia
message/Email/Vodafone message]
7. : Loging in the Vodafone Messanger
8. : “Voice Calls” diverts set to “Always”
9. ////:
Connection status
[USB cable/Bluetooth wireless setting
[enabled (in standby or except in
standby)/exchanging information/
talking with the Bluetooth headset/Hide
my phone]]
10. ///:
Java™ application [executed (colour)/
suspended (grey)]/Music player/FM
radio
11. : Secure WAP page displayed
12. ////:
Silent/vibration setting [silent/
increasing volume/vibration enabled/
silent and vibration enabled/increasing
volume and vibration enabled]
13. / / : Speaker mode [speaker phone/speaker
activated/microphone muted]
14. : Memory card inserted
15. : Battery level
16. : Daily alarm enabled
17. / : Schedule entry enabled [with/without
reminder alarm]
18. : Outbox contains unsent messages [text
message/multimedia/Email]
19. / / : WAP/OTA provisioning alerts [WAP
alert/OTA provisioning alert/WAP and
OTA provisioning alerts]
20. : Voicemail message alert
21. : Serect mode set to “On”
22. : Function Lock enabled
23. : Keypad Lock enabled
24.(No display)/////:
Current profile [Normal/Meeting/
Activity/Car/Headset/Silent]
Getting Started 17
Display Indicators (External Display)
Status Indicators
1. : Battery level
2. : : Strength of received signal/Sarvice out
of range
3. : Missed events
4. : Alerts [messages/Delivery report]
5. : Vodafone message incoming
6. : Flight mode
18 Navigating Functions
Navigating Functions
All applications are accessed from the Main menu. To
open the Main menu, press the centre key ( ) in
standby.
To launch applications, you will need to highlight menu
items, and make selections. To select a menu item
(indicated in quotation marks), move the cursor using
a, b, c and d, and press to select.
In certain procedures, you will need to press one of the
soft keys (indicated in square brackets), which are
displayed in the lower left and right of the screen. Press
the corresponding soft key (A or C).
To return to the previous screen, press the right soft key
if it displays Back. To close the Main menu, press the
right soft key if it displays Exit.
Each section in this user guide starts with a list of items
you will need to select in order (indicated in italics)
before performing the procedures shown. Select each
item to reveal the next set of items that you have to
choose from. Open subsection items after opening
those listed in the main section.
Example:
“Contacts”
→
“Contacts List”
→
“Add New Contact”
Voice Call Functions 19
Voice Call Functions
Making a Voice Call
1. Enter the area code and the phone number you wish
to dial and press D to dial.
If you enter the wrong number, press [Clear] to
delete the number to the left of the cursor.
Emergency Calls
1. Enter 112 (international emergency number) using
the keypad and press D to dial.
Note
• Emergency calls may not be able to be made on all
mobile phone networks when certain network
services and/or phone features are in use. Contact
your service provider for more information.
• This emergency number can normally be used to
make an emergency call in any country, with or
without a SIM card inserted, if a GSM network is
within range.
International Calls
1. Press and hold Q until a + (international dialling
prefix) sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number,
and press D to dial.
Adding an Entered Phone Number to the
Contacts List
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Add New
Contact” on page 29.
Showing or Hiding My Phone Number on the
Display of the Called Party
1. After entering a phone number, press [Options] and
select “Show My ID” or “Hide My ID”.
20 Voice Call Functions
Speed Dialling
Up to 8 phone numbers from the Contacts List memory
(Handset and SIM) can be assigned to speed dials. You
can call the numbers using the digit keys (G to O).
The phone number of the Voicemail centre is assigned
to G.
For details on setting the speed dial list, see “Speed Dial
List” on page 34.
1. To dial a number using the speed dial, press and
hold any of the digit keys (G to O).
The phone number saved in the speed dial list is
dialled.
Redialling
You can redial numbers in the call log. Select from
specific categories or “All Calls”. Specific categories
contain up to 30 numbers and the “All Calls” list
contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled
Numbers”, “Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial the call.
Answering a Voice Call
When an incoming call is detected, the phone rings.
1. Press D, or press [Options] and select
“Answer” to answer the call.
Or press any key except F and [Busy] when the
“Any Key Answer” function is enabled. Set the Any
Key Answer function in the profile of each mode
(p. 111).
Tip
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name and phone
number are displayed on the screen.
• If the number is a restricted number, the display
shows “Withheld”.
• When you receive a call from the person whose
picture is registered in the Contacts List, the picture,
name and phone number are displayed.
Voice Call Functions 21
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call
you do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a
busy tone to the caller.
In Call Menu
Your phone has additional functions available while a
call is in progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree
volume, if connected) from five levels.
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call
or press W (or b/c) to decrease the volume.
3. Press when the volume is set to the desired
level.
Turning the Speaker On and Off
You can talk via the loudspeaker on the clamshell cover
of the phone when it is on.
1. During a call, press [Options] and select
“Loudspeaker On”.
Putting a Call on Hold
This function allows you to manage two calls at the
same time. If you wish to make another call while you
are talking to someone, you can put the current call on
hold to call someone else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another
call to, then press D.
Tip
• You can also make another call by entering the phone
number during a call instead of step 1. The current
call is automatically put on hold.
22 Voice Call Functions
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select
“Messaging”.
The following options are available: “Create
Message” to make an SMS and MMS, or “Inbox”,
“Sent” or “Drafts” to access these folders. For
details on SMS, see “SMS” and “MMS” on
page 43.
Call Waiting
This service notifies you of another incoming call while
you have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to
the second caller.
Note
• You need to set “Call Waiting” to “On” if you wish
to use the Call Waiting service (p. 129).
• Call Waiting service may not be available on all
networks. Contact your service provider for more
information.
• If you do not wish to answer the second call, press
[Options] and select “Busy” in step 1. If “Reject” is
selected, the log of the second call is saved as a
missed call.
Conference Call
Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Multi
Party”.
2. Select “Conference All” to join the conference call.
3. Press F to end the conference call.
Note
• The conference call service may not be available on
all networks. Contact your service provider for more
information.
• You have more options for the Conference call in step
2:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on
hold, select “Private”.
• To end the call with all participants, select “End
This Call”.
• To reject adding more participants to the current
party, press [Options] and select “Reject”, or you
can send the busy tone by selecting “Busy”.
Voice Call Functions 23
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the
conference call and press D to dial.
3. Press [Options] and select “Multi Party”.
4. Select “Conference All” to join the conference call.
If you wish to add other participants, repeat steps 1
to 4.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that
you wish to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
To Have a Private Conversation with One of the
Participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you
wish to talk to.
2. Press [Options] and select “Multi Party”.
3. Select “Private”.
4. Once you have finished the private conversation,
press [Options] and select “Multi Party”.
5. Select “Conference All” to return to the conference
call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
24 Entering Characters
Entering Characters
When entering characters to create Contacts List
entries, text messages or multimedia messages, etc.,
press the corresponding keys.
In multi-tap input method, press each key until the
desired character is displayed. For example, press H
once for the letter A or twice for the letter B.
Table of Characters
Pressing each key scrolls characters in the following
order. The order varies depending on the language
selected.
English Mode
Key Upper Case
Characters
Lower Case
Characters Numeric
G. (full-stop) , (comma) - (hyphen) ? !
’ (apostrophe) @ :1 1
HABC2 abc2 2
IDEF3 def3 3
JGHI4 ghi4 4
KJKL5 jkl5 5
LMNO6 mno6 6
MPQRS7 pqrs7 7
NTUV8 tuv8 8
OWXYZ9 wxyz9 9
Q(space) + = < > € £ $ ¥ % & 0 0
PSwitches character case between four modes:
Abc, ABC, 123 and abc.
R
.,?!:;-+#∗
@' " ( ) _&€£ $
%/ ˜ <>§= \ | ¥
¿¡^[ ]{ }¤ÅÄ
ÆåäæàÇÉèé ì
ÑñÖØöøòßÜü
ù∆ Φ Γ Λ ΩΠΨΣ Θ
Ξ (space) ↵
G-O:
Q
Press and hold to enter 0 - 9 numbers.
P: Press and hold to shift between
multi-tap and T9 mode.
R: Press and hold to display the Input
Language screen.
Key Upper Case
Characters
Lower Case
Characters Numeric
Entering Characters 25
Changing the Input Language
1. On the text entry screen, press [Options] and select
“Input Language”.
2. Select the desired language.
Changing the Input Mode
T9 Text Input
T9 text input method is a shortcut to enter text easily
and quickly.
1. On the text entry screen, press and hold P to enter
T9 mode.
2. Press [Options] and select “Input Mode”.
3. Select the input mode (Abc, ABC, 123, abc).
4. Press each key once for any letter you require on
that key.
To enter the word “How”, press J L O.
5. If the word shown isn’t the one you want, press a
or b until you highlight the correct one.
6. Press to select the word.
Note
• If the correct word is not shown in step 5, enter the
correct word again after switching to the multi-tap
input method.
Tip
• If you press Q instead of step 6, a space is inserted
next to the selected word.
Symbols and Punctuation
1. On the text entry screen, press [Options] and select
“Add Symbol”.
2. Select the desired symbol.
26 Entering Characters
My Dictionary
You can create your own word list for T9 text input.
1. On the text entry screen in T9 mode, press [Options]
and select “My Dictionary”.
2. Select “Add New Word” and enter a new word.
Editing a Word in the List
1. On the text entry screen in T9 mode, press [Options]
and select “My Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
Using Templates
You can use the phrases registered in Text Templates
when entering characters.
For details on creating the text template, see “Adding
Phrases to Text Templates” on page 81.
1. On the text entry screen, move the cursor to the
point you wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to
be cut, then press .
4. Move the cursor to the last letter to highlight the
area, then press .
5. Move the cursor to the point you wish to paste the
letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
28 Contacts List
Contacts List
You can store the phone numbers and Email addresses
of your friends, family and colleagues in the Contacts
List.
Your phone can store up to 500 entries. In a Contacts
List, you can save the following items:
Items Saved in the Handset Memory
Items Saved in the SIM Memory (depending on
the SIM card)
Changing the Name Order
“Contacts”
→
“Settings”
→
“Name Order”
1. Select “First-Last Name” or “Last-First Name”.
Changing the List Displayed
“Contacts”
→
“Settings”
→
“Contacts Location”
1. Select from “Handset”, “SIM” or “Both”.
First Name up to 32 characters
Last Name up to 32 characters
Phone Number up to 3 phone numbers (up to 32
digits each)
Email Address up to 3 Email addresses (up to
128 characters each)
Category 16 categories
Street & Number up to 64 characters
City up to 64 characters
State/Province up to 64 characters
Postal Code up to 20 characters
Country up to 32 characters
Note up to 256 characters
Birthday (date)
(M 8-1) Picture (file name)
Tone/Video for
Incoming Call
Tone/Video for
New Message
(file name)
Secret (On or Off)
Name up to 32 characters
Phone Number up to 32 digits
(M 8-8-1)
(M 8-8-2)
Contacts List 29
Selecting the Storage Memory
“Contacts”
→
“Settings”
→
“Save New Contact to”
1. Select from “Handset”, “SIM” or “Choose before
Saving”.
Tip
• “Choose before Saving” prompts you to choose the
memory every time you save a new entry.
Sorting the Contacts List Entries
You can change the listing order of the Contacts List
entries between by alphabetical order or by different
categories.
“Contacts”
→
“Settings”
→
“Sort Contacts”
1. Select “By Alphabet” or “By Category”.
Saving an Unregistered Number
After the call ends, you can have the confirmation
screen asking you if you wish to register the number to
Contact List.
“Contacts”
→
“Settings”
→
“Save Unregistered”
1. Select “Incoming Call” or “Outgoing Call”.
2. Select “On” or “Off”.
Add New Contact
You can choose either the phone or SIM card memory
locations to store the new entry. For switching
locations, see “Selecting the Storage Memory” on
page 29.
The amount of phone numbers that you can store to the
SIM card is dependent on its capacity. Contact your
service provider for details.
“Contacts”
→
“Contacts List”
→
“Add New Contact”
If you select the “Choose before Saving” option for the
memory to be used, the selection is between “To
Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the
relevant information.
2. Press [Save] when finished.
Tip
• To create an entry, at least one field must be filled
(“First Name”, “Last Name”, “Phone Number” or
“Email Address” for the handset memory; “Name”,
“Phone Number” or “Email Address” for the SIM
memory).
(M 8-8-3)
(M 8-8-4)
(M 8-8-5)
30 Contacts List
Viewing My Contact Details
You can register and edit your own contact as with
other Contacts List entries.
“Contacts”
→
“My Contact Details”
Copying Contacts List Entries
between SIM Card and
Handset
“Contacts”
→
“Manage Contacts”
→
“Copy All
Entries”
1. Select “From SIM to Handset” or “From Handset to
SIM”.
Note
• When you insert the SIM card into your phone for the
first time and start the Contacts List application, the
confirmation screen is displayed automatically,
asking you if you wish to copy or not. The number of
Contacts List entries to be copied varies depending
on the SIM capacity.
• If the memory space is not enough to save all entries,
you cannot complete copying.
Finding a Name
“Contacts”
→
“Contacts List”
1. Enter the first few letters of the name.
Search results are displayed in alphabetical order.
Tip
• You can select the Contacts location from “Both”,
“Handset” or “SIM” before searching.
Dialling from the Contacts List
“Contacts”
→
“Contacts List”
1. Highlight the desired entry and press D.
Tip
• If more than one phone number is registered for the
entry, highlight the desired phone number after step
1 and press D.
• You can also dial from the details screen of the
Contacts List. On the details screen, select the
desired phone number and press D.
(M 8-5)
(M 8-9-1)
Contacts List 31
Editing Contacts List Entries
“Contacts”
→
“Contacts List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Adding a Thumbnail to Entries
“Contacts”
→
“Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Picture”.
4. Select “Assign Picture”.
5. Select the desired picture.
6. Press [Save] when finished.
Note
• If you delete a picture in the handset memory, the
corresponding thumbnail is also deleted.
• To store a picture right after it was taken, select
“Take Picture” in step 4.
Assigning a Ringtone or a Ring Video
Clip to Each Entry
“Contacts”
→
“Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Tone/Video for Incoming Call” or “Tone/
Video for New Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 7.
5. Select “Preset Sounds” or “My Sounds”.
6. Select the desired tone or video clip.
7. Press [Save] when finished.
32 Contacts List
Deleting Contacts List Entries
Deleting All Contact Entries
“Contacts”
→
“Manage Contacts”
→
“Delete All
Entries”
1. Select from “Handset Entries”, “SIM Entries” or
“Both Entries”.
2. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Changing the
Handset Code” on page 119.
Deleting a Contact Entry
“Contacts”
→
“Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Manage Category
Different ringtones can be set for each category. If you
do not change a category ringtone, the ringtone
assigned in the Profiles menu is used.
“Contacts”
→
“Manage Category”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Incoming Call” or “For New Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “My Sounds”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone” on page 109 or
“Assigning a Ring Video Clip File” on page 109.
Editing the Category Name
You can edit category names to be assigned to the
Contacts List entries.
“Contacts”
→
“Manage Category”
1. Highlight the desired category name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
(M 8-9-3)
(M 8-3)
Contacts List 33
Contact Groups
You can create a mailing list to send the same message
to a group of recipients at once. Up to 5 groups can be
registered.
Creating a New Mailing List
“Contacts”
→
“Contact Groups”
→
“Add New
Group”
1. Enter the group name.
The new group name is displayed following the last
group on the Group List screen.
Adding Recipients to a Group
Up to 20 recipients can be registered in each list.
“Contacts”
→
“Contact Groups”
1. Select the desired group name.
2. Select “Assign New Entry”.
3. Select the desired entry.
The detailed screen is displayed.
4. Select the desired phone number or Email address.
Tip
• If you modify the entry assigned in the group, you
need to re-assign it to the group. Press [Options] and
select “Re-assign Entry” in step 2.
• To remove an entry from the group, press [Options]
and select “Remove Entry” in step 2.
• To remove a group, highlight a group name and
press [Options] and then select “Delete” in step 1.
Sending a Message Using a Mailing List
“Contacts”
→
“Contact Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
3. Select the desired type of messaging.
For further procedures, see “Creating a New
Message” on page 44.
Memory Status
This function helps you to check the memory used in
the Contacts List.
“Contacts”
→
“Manage Contacts”
→
“Memory
Status”
(M 8-6)
(M 8-9-2)
34 Contacts List
Speed Dial List
You can set a maximum of 8 phone numbers in the
Speed Dial list (p. 20).
Setting Contacts List Entries in the Speed Dial
List
“Contacts”
→
“Contacts List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Add to Speed Dial”.
4. Select the desired location.
Tip
• The nine digit keys correspond to list numbers.
To Edit the Speed Dial List
“Contacts”
→
“Speed Dial List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Re-Assign” (or
“Assign”).
Sending a Contacts List Entry
“Contacts”
→
“Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Send Contact”.
3. Select “As Message” or “Via Bluetooth”.
For “As Message”
For details, see “MMS” on page 43.
For “Via Bluetooth”
For details, see “Bluetooth” on page 120.
Receiving a Contacts List Entry
When the phone receives a Contacts List entry, a
confirmation message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Contacts List.
Press [No] to reject.
Tip
• For details on entering Bluetooth wireless settings,
see “Connectivity” on page 120.
(M 8-4)
Contacts List 35
Sending a Voice Clip Message or
Video Clip Message Using an
Address from the Contacts List
“Contacts”
→
“Contacts List”
1. Select the desired entry including the phone number
or Email address you wish to use.
2. Highlight the desired phone number or Email
address.
3. Press [Options] and select “Create Message”.
4. Select “Voice Message” or “Video Message”.
For further procedures, see “Creating a New
Message” on page 44.
Synchronising Contacts List Entries
with those on the Internet
The data synchronisation function is a network service
and allows you to save your Contacts List entries in the
handset memory on the Internet server. The data in the
SIM card will not be saved. Subscribe to a
synchronisation service by contacting your network
service centre.
Synchronising the Contacts List
“Contacts”
→
“Synchronise”
1. Select “Sync Now!” to synchronise data.
Note
• “Sync Now!” is not available if there is no active
Synchronisation Setting.
(M 8-7)
(M 8-7-1)
36 Contacts List
Synchronisation Settings
“Contacts”
→
“Synchronise”
→
“Sync Settings”
1. Select the desired account or “Create New” to enter
the following settings.
“Profile Name”: Synchronisation profile
name (Unique name)
“Server Name”: Server address
“User ID”: User ID for authentication
“Password”: Password for authentication
“Proxy”: Selects Proxy setting for
synchronisation.
“Contacts DB Name”: Contacts List database name
on the server
Note
• Synchronisation settings have already been entered
in your phone depending on your service provider.
You may have restrictions on viewing, deleting,
copying or modifying the settings. Contact your
service provider for details.
Dialling a Service Phone Number
Certain SIM cards contain service phone numbers that
can be dialled. Contact your SIM card vendor for more
information. On the Contacts screen, “Service Dialling
No.” is displayed at the bottom of the list.
“Contacts”
→
“Service Dialling No.”
1. Select the desired service phone number.
Tip
• If the SIM card contains only one service phone
number, you can dial it in step 1 by pressing .
• If no service phone number is stored in the SIM card,
this menu is not displayed.
(M 8-7-3)
(M 8-10)
Camera 37
Camera
Your phone has a built-in digital camera that allows you
to take pictures and record video clips wherever you
are. This section starts with basic functions and
operational procedures to take, save and send pictures
and video clips, followed by common and unique
functions to camera and video modes.
Taking Pictures
“Camera”
1. Press to take the picture.
The shutter sounds and the still image of the taken
picture is displayed.
2. Press [Save].
The taken picture is saved in My Items.
To cancel, press [Cancel].
To send the taken picture, press in step 2 and
select “As Message”, “As Postcard” or “To Media
Album” from the send option. (The Postcard and
Media Album service is not available with some
service providers. Contact your service provider for
more information.)
Note
• When the video camera is launched, press [Options]
and select “Go to Photo Camera”, or press c.
• When you try to send the picture that has too large a
file size, the picture size is resized for the message.
The original sized picture is saved in My Items.
Recording Video Clips
You can record a video clip with your phone.
Recording Video Clips
“Camera”
The preview is displayed on the screen.
1. Press .
2. To stop recording, press .
3. Select “Save”.
The video clip is saved in My Items.
To view the preview before saving, select
“Preview”.
To send the video clip, select “Save and Send”.
Then select the desired way you wish to send. For
further procedures, see “Creating a New Message”
on page 44.
Note
• You can only send video clips when “For Message”
is selected for the recording time. For details, see
“Selecting the Recording Time” on page 42.
(M 5)
38 Camera
Common Functions in the Photo and
Video Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. In the viewfinder mode, press a or b.
Once the phone has returned to standby, the zoom
settings return to default.
Adjusting the Exposure
“Camera”
→
[Options]
→
“Exposure”
1. Press a (Bright) or b (Dark).
: (Bright → Normal → Dark)
Once the phone has returned to standby, the brightness
settings return to default.
Using the Self-Timer
Select the appropriate option.
“Camera”
→
[Options]
→
“Modes”
→
“Self-timer”
(Photo Camera Mode)
“Camera”
→
[Options]
→
“Self-timer” (Video
Camera Mode)
1. Select “On” or “Off”.
“ ” is displayed on the screen when you select
“On”.
Switching between the Photo and Video
Camera Modes
You can switch between the photo and video camera
modes by pressing c or d.
Select the appropriate option.
“Camera”
→
[Options]
→
“Go to Video Camera”
“Camera”
→
[Options]
→
“Go to Photo Camera”
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera”
→
[Options]
→
“Picture Quality”
“Camera”
→
[Options]
→
“Video Quality”
1. Select the desired picture or video quality.
:Super Fine
:Fine
:Normal
Note
• The better quality you select, the larger file size is
needed.
Camera 39
Selecting the Storage Memory
Select the appropriate option.
“Camera”
→
[Options]
→
“Settings”
→
“Save New
Pictures”
“Camera”
→
[Options]
→
“Settings”
→
“Save New
Videos”
1. Select the desired location from “To Handset
Memory”, “To Memory Card” or “Choose bef.
Saving”.
Note
• If you select “Choose bef. Saving”, select the desired
location every time you save.
Auto Save
You can set the phone to save pictures and video clips
automatically.
“Camera”
→
[Options]
→
“Settings”
→
“Auto Save”
1. Select “On” or “Off”.
Selecting the Anti-flicker Mode
“Camera”
→
[Options]
→
“Settings”
→
“Anti-
flicker”
1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.
Note
• Vertical stripes may occur on the picture due to the
light source. Change the anti-flicker mode to rectify.
Using the Help Function
“Camera”
→
[Options]
→
“Help”
Common Shortcut Keys
If multiple options exist, they switch each time you
press each following key.
Photo Camera Video Camera
GZoom Max/Min
HExposure
I
JSave New Pictures Save New Videos
KPicture Size Picture Size
LMicrophone On/Off
MPicture Quality Video Quality
NSelf-timer On/Off
O
QSwitches Viewfinder
between with and
without indicators
Switches the display
modes in the Preview
screen
40 Camera
Note
• The “Switches Screen” option is available in
“Preview” before you save a video clip. See
“Recording Video Clips” on page 37.
Functions in the Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures
are saved in the JPEG format.
“Camera”
→
[Options]
→
“Picture Size”
1. Select the desired size.
960 × 1280 dots/768 × 1024 dots/
480 × 640 dots/240 × 320 dots/120 × 160 dots
Continuous Shoot
There are various modes for taking continuous shots.
“Camera”
→
[Options]
→
“Modes”
→
“Continuous
Shoot”
1. Select the desired mode.
The following continuous shoot modes are
available:
“Off”: The continuous shoots are
cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures
continuously.
After selecting this mode,
select from “Fast”,
“Normal” or “Manual”.
“Overlapped” ( ): Overlaps continuous
pictures into one picture and
makes an afterimage.
After selecting this mode,
select “Fast” or “Normal”.
Note
• When you select “Manual” to take continuous
pictures, press manually in the desired speed.
• When the Timer and Continuous Shoot functions are
simultaneously set, “ ” (for “4 Pictures”, for
example) is displayed instead.
• “9 Pictures” and “Overlapped” are not available for
picture sizes larger than 240
×
320.
Camera 41
Selecting a Frame
You can select the frame from preset patterns or My
Pictures.
“Camera”
→
[Options]
→
“Modes”
→
“Add Frame”
1. Select “Preset Frames” or “My Pictures”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press .
Note
• Images larger than 240 dots [W]
×
320 dots [H]
cannot be used.
Using the Full Screen
You can display the preview on the full screen without
the soft key area and indicator area.
“Camera”
→
[Options]
→
“Settings”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal
Viewfinder”.
Selecting the Shutter Sound
“Camera”
→
[Options]
→
“Settings”
→
“Shutter
Sound”
1. Select the desired shutter sound from 3 preset
patterns.
To playback the shutter sound, press [Play] in step 1.
Note
• Continuous Shoot uses the specialised shutter sound
that cannot be changed from the above settings.
• The shutter sound remains active even when
“Volume” (p. 108) is set to “Silent” to prevent
unauthorised use.
42 Camera
Functions in the Video Camera Mode
Selecting the Recording Time
“Camera”
→
[Options]
→
“Record Time”
1. Select “For Message” or “Extended Video”.
For Message ( ): Limits the size to send a
message depending on
service providers.
Extended Video ( ):Less than 30 minutes
(depending on the memory).
Note
• If you select “For Message” for the recording time,
the file size is limited depending on the service
provider. Therefore, the quality is also limited for the
setting.
• “Save and Send” is not displayed after recording in
the Extended Video mode.
Selecting the Picture Size
You can select the size of pictures.
“Camera”
→
[Options]
→
“Picture Size”
1. Select “Large(QCIF)” or “Small(SubQCIF)”.
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone
needs to be activated.
“Camera”
→
[Options]
→
“Settings”
→
“Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default
setting. Select “Off” to record a video clip without
the sound.
• The file size of a video clip can be reduced if the
sound is not recorded.
Video Encoding
“Camera”
→
[Options]
→
“Settings”
→
“Video
Encode”
1. Select the appropriate format.
Messaging 43
Messaging
Your phone allows you to send and receive text,
multimedia and Email. It is compatible with most POP3
Email providers.
SMS
SMS allows you to send text messages up to
765 characters long. If you send a message of more than
160 characters, it is split into several segments.
MMS
MMS allows you to send and receive multimedia
messages of up to 300 KB with images, sound, or video
clips attached.
Email
Email allows you to send messages of up to 300 KB.
Note
• Some MMS functions may not always be available
depending on your network. Contact your service
provider for more information.
• Maximum message size varies depending on the
settings by the service provider.
1. Recipient field
2. Message field
3. Send indicator
4. Attachment indicators (from left: picture, sound,
video clip, others)
(M 4)
44 Messaging
Creating a New Message
(SMS/MMS)
A
→
“Create Message”
→
“Message”
(Email)
A
→
“Create Message”
→
“Email”
1. Select the address field.
2. Select the desired method to enter the address.
3. For MMS, enter or select the Email address or
phone number from the Contacts List. For SMS,
enter or select a phone number. For Email, enter or
select an Email address.
• To add multiple Email addresses or phone
numbers, highlight the recipient field, press
[Options], select “Edit Recipients”, then select
“Add Contact”. Enter or select the Email address
or phone number from the existing Contacts List.
• To change the recipient types, press [Options],
select “Edit Recipients” and highlight the desired
recipient. Press [Options] and select “Change to
To”, “Change to Cc” or “Change to Bcc”.
• To add a subject, press [Options] and select “Add
Subject”.
4. Place the cursor in the message field.
5. Enter the message.
6. Highlight the “Send” indicator in the lower left of
the screen. Press and select “Send Message”.
After the message is sent, the message is moved to
the Sent box.
Tip
• To send the same message to a group of recipients,
select “Select Group” in step 2, then select the
desired group name. For details on creating a
mailing list, see “Creating a New Mailing List” on
page 33.
(M 4-1)
Messaging 45
To Add a Slide Show
1. In step 4 in “Creating a New Message”, press
[Options] and select “Add Slide”.
If you wish to add more slides, select “Add Slide
After” or “Add Slide Before”.
2. Enter the message.
If you wish to set the duration of each slide,
highlight the space between the slides. Press
[Options] and select “Slide Duration”, then select
the desired duration.
Tip
• You can create messages up to 300 KB. Each slide
can contain one picture and/or one sound file or
video clip.
To Attach My Items Data
1. In step 5 in “Creating a New Message” on page 44,
highlight the “Picture”, “Sound” or “Video”
indicator in the lower centre of the screen, and then
press .
2. Select “Saved Pictures”, “Saved Sounds” or “Saved
Videos”.
3. Select the desired file.
If you wish to take new pictures, record sounds or
video clips, select “Take Picture”, “Record Voice”
or “Record Video”.
• When attaching JPEG files, select the appropriate
resize option, as the maximum message size for
sending varies depending on the service provider.
To Remove or Replace Attachments
1. In step 5 in “Creating a New Message”, press
[Options] and select the corresponding remove
option for each attachment.
46 Messaging
To Attach a Contacts List Entry
1. In step 5 in “Creating a New Message” on page 44,
highlight the “Others” indicator in the lower right of
the screen. Press and select “Attach Contact”.
2. Select the desired entry.
If you wish to select your own Contacts List entry,
select “My Contact Details”.
To Attach a Schedule Entry
1. In step 5 in “Creating a New Message” on page 44,
highlight the “Others” indicator in the lower right of
the screen. Press and select “Attach
Appointment”.
2. Select the desired day including a schedule entry
you wish to add.
3. Select the desired schedule entry.
Using the Sending Options
You can use the message sending options for each type
of message.
1. Highlight the “Send” indicator in the lower left of
the screen, then press and select “Messaging
Settings”.
• “Read Report” (“On”, “Off”) (MMS): Confirms
whether or not a report is sent notifying the
sender that the message has been read.
• “Delivery Report” (“On”, “Off”) (SMS/MMS):
Enables or disables Delivery Report when the
message is successfully sent to the recipient.
• “Expiry Time” (“Maximum”, “30 minutes”, “1
hour”, “6 hours”, “1 day”, “1 week”) (SMS/
MMS): Sets Expiry Time for a message to be
saved in the server.
• “Priority” (“High”, “Normal”, “Low”):
Prioritises composed messages.
• “Delivery Time” (“No delay”, “30 minutes”, “1
hour”, “6 hours”, “1 day”, “1 week”) (SMS/
MMS): Sets the time the message is delivered
after the Send key is pressed.
Messaging 47
2. Highlight the “Send” indicator in the lower left of
the screen. Press and select “Send Message”.
After the message is sent, the message is moved to
the Sent box.
Note
• The current message size displayed while you are
creating the message is an approximation.
• If a message cannot be sent for some reason, the
message stays in the Outbox and the “ ” is
displayed in standby.
Tip
• To save the message without sending, press
[Options] and select “Save to Drafts” in step 4 in
“Creating a New Message” on page 44.
• You can send the following items attached to
multimedia messages. Details are given in the
following sections.
• My Items data
• Contacts List entry
• File (Schedule entry created by Calendar,
Contacts List entry), etc.
• You can use the template option to help you compose
messages. For details on using this option, see
“Using Templates” on page 26.
Sending a Message in the Drafts Box
A
→
“Drafts”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Highlight the “Send” indicator in the lower left of
the screen. Press and select “Send Message”.
Sending a Voice Clip Message or Video Clip
Message
You can record a new voice or video clip when creating
a new message.
Select the appropriate option.
A
→
“Create Message”
→
“Voice Message”
A
→
“Create Message”
→
“Video Message”
1. Press to start recording.
2. Press to stop recording.
3. Select “Accept” to attach to the new message.
The file is saved in the corresponding folder in My
Items.
For further procedures, see “Creating a New
Message” on page 44.
(M 4-3)
(M 4-1-2) (M 4-1-3)
48 Messaging
Reading a Message
Messages you receive are saved in the Inbox.
A
→
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Select the message you wish to view.
Storing the Phone Number of a Sender in the
Contacts List
A
→
“Inbox”
1. Highlight the message from which you wish to store
the phone number or Email address.
2. Press [Options] and select “Save Address”.
The new Contacts List entry screen including the
phone number is displayed. For details on creating
a new Contacts List entry, see “Add New Contact”
on page 29.
Calling the Phone Number of a Sender
Embedded in the Message
A
→
“Inbox”
1. Highlight the message including the phone number
you wish to dial.
2. Press [Options] and select “Call Sender”.
Downloading a Single MMS
A
→
“Inbox”
1. Highlight the message alert ( ) you wish to
download.
2. Press [Options] and select “Download”.
Tip
• You can download multiple messages at the same
time. See “Downloading Multiple MMS”
Downloading Multiple MMS
A
→
“Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Multiple Select”.
3. Select the desired message alert, press [Options]
and select “Select” or “Select All”.
4. Press [Options] and select “Download”.
The selected messages are downloaded at the same
time.
Messaging 49
Replying to a Message or to All Addresses
A
→
“Inbox”
1. Highlight the message the sender of which you wish
to reply to.
2. Press [Options] and select “Reply” or “Reply All”.
3. Select “Reply” or “Reply with History”.
4. Enter the message.
5. Highlight the “Send” indicator in the lower left of
the screen. Press and select “Send Message”.
Forwarding a Message
A
→
“Inbox”
1. Highlight the message you wish to forward.
2. Press [Options] and select “Forward”.
3. Perform steps 1 to 5 in “Creating a New Message”
on page 44.
Sorting the Messages in the List
A
→
“Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Sort”.
3. Select the desired sort type.
Locking or Unlocking the Messages
A
→
“Inbox”
1. Highlight the message you wish to lock or unlock.
2. Press [Options] and select “Advanced”.
3. Select “Lock” or “Unlock”.
50 Messaging
Sending a Picture File with Postcard
Your phone allows you to send multimedia messages to
a Vodafone specific Postcard service centre that prints
the picture and mails it to the recipient’s home address
specified in the MMS message. (Your phone is initially
provided with the address of a Vodafone specific
Postcard service centre, and its address cannot be
changed.)
Note
• This service is not available with some service
providers. Please contact your service provider for
more information.
To Create a New Postcard
See the note on page 160 for menu indications.
A
→
“Create Message”
→
“Postcard”
→
“Saved
Pictures”
1. Select a picture you wish to send.
If you wish to take new pictures, select “Take
Picture”.
If the file size of selected JPEG format pictures or
taken pictures is too large to send, resize the picture
and try again.
2. Enter your message.
You can enter messages of up to 200 bytes.
3. Enter or select the recipient.
See the note below for details.
• “Name” (mandatory):
Name of the recipient for a postcard up to 50
bytes
• “Additional Information” (optional):
Additional information of the recipient up to 50
bytes
• “Street & Number” (mandatory):
Street and number up to 50 bytes
• “City” (mandatory):
City up to 50 bytes
• “Postal Code” (optional):
Postal code up to 20 bytes
• “State/Province” (optional):
State, province, and region up to 50 bytes
• “Country” (optional):
Country up to 20 bytes
4. Press [Options] and select “Send Postcard”.
(M 4-1-4)
Messaging 51
Note
• The items “Name”, “Street & Number” and “City”
are necessary to complete sending Postcards.
• The items displayed differ according to the service.
Please contact your service provider for more
information. The item “Country” may not be
displayed, so you cannot send Postcards overseas
from your phone.
• Asterisks entered in the message or the address
become invalid when the message is sent, and spaces
cannot be entered in the Postal Code.
• Files in Animation GIF format cannot be used for the
Postcard service.
• The picture quality of Postcards varies depending on
the picture size.
Vodafone Messenger
With Vodafone Messenger you can stay in touch and
have fun with friends through instant text
conversations. You will know when your friends are
available to chat and that they immediately receive your
instant messages. When you first start using Vodafone
Messenger all, you need to know is your friend’s
mobile number to build your Vodafone Messenger
contact list.
(M 4-6)
52 Messaging
1st Login
A
→
“Vodafone Messenger”
1. Enter your screen name and press .
Your phone is connected to mobile Internet sites.
2. Select one of the following methods, to enter
contact members.
“By Mobile Number”:
Enters the contact member’s phone numbers.
“By Messenger ID”:
Enters the contact member’s messenger ID.
Entry in your Contacts List:
Selects contact members from your Contacts List.
3. Enter the display name and press .
Tip
• You can change the screen name and display name at
any time.
• If necesssary items for Messenger Settings are not
set, the settings screen for the settings is displayed.
(p. 59)
Starting a Conversation
A
→
“Vodafone Messenger”
1. Display the Online Contacts tab or the Groups tab
by c/d.
2. Select the display name or the group name you wish
to send the message to.
The message window opens.
3. Enter the message in the lower window and press .
When the message is sent, the message moves to the
upper window.
4. When your contact member replies, his or her
message is displayed in the upper window.
5. To continue the conversation, repeat steps 3 and 4.
Note
• You can enter up to 160 characters in each message
that is sent.
• You can send messages even if contact members are
not connected.
Messaging 53
Tip
• You can move the cursor by a/b.
When the cursor is moved down at the end of the text
in the upper window, the cursor moves to the lower
window and this window becomes active.
When the cursor is moved up at the beginning of the
text in the lower window, the cursor moves to the
upper window and this window becomes active.
• The number of lines in the upper and lower windows
changes to suit the circumstances.
Adding a New Contact
Adding a New Contact Members
A
→
“Vodafone Messenger”
1. Display the Contacts tab by c/d.
2. Press [Options] and select “Add New Contact”.
3. Enter the new contact member by steps 2 and 3 in
“1st Login”.
Adding a New Contact Group
A
→
“Vodafone Messenger”
1. Display the Groups tab by c/d.
2. Press [Options] and select “Add New Group”.
3. Enter the group name and press .
The Contacts list opens.
4. Highlight the contact member you wish to add to the
group and press to check.
To uncheck, press once.
5. Press [Save].
Adding Members to a Contact Group
A
→
“Vodafone Messenger”
1. Display the Groups tab by c/d.
2. Highlight the group you wish to add the contact
members to.
3. Press [Options] and select “View Group”.
The Contacts list open.
4. Press [Options] and select “Add to Contacts”.
5. Select the contact members by steps 4 and 5 in
“Adding a New Contact Group”.
54 Messaging
Reading a Message
A
→
“Vodafone Messenger”
1. Display the Conversations tab by c/d.
2. Select the desired message you wish to read.
Tip
• You can continue a conversation after you have
received a message by entering a text message in the
lower window.
Saving a Conversation
1. Display the Conversations tab by c/d.
2. Highlight the conversation you wish to save.
3. Press [Options] and select “Save Conversation”.
Note
• You can save up to 2400 bytes in a single
conservation. When this limit is exceeded, messages
are automatically deleted from the oldest message.
• You can save up to ten conversations. When this limit
is exceeded, conversation is overwritten from the
oldest message.
• You can view saved conversations as follows.
Reading a Saved Conversation
A
→
“Vodafone Messenger”
1. Display the Conversations tab by c/d.
2. Press [Options] and select “Saved Conversations”.
3. Select the conversation you wish to read.
Watchers List
You can watch the connection status of contact
members in the Watchers List on the Online Contact
tab.
Note
• When you open the Online Contact tab, the contact
members in your Watchers List receive the
conformation message.
Messaging 55
Entry a Watchers List
A
→
“Vodafone Messenger”
1. Display the Conversations tab by c/d.
2. Press [Options] and select “Settings”.
3. Select “Watchers List”.
The Watchers List opens.
4. Press [Options] and select “Add to Contacts”.
5. Select the contact members by steps 4 and 5 in
“Adding a New Contact Group”.
Note
• After the member who received the comfirmation
message accepts the entry, the member is added to
the Watchers List.
Tip
• To reject a member, highlight the member you wish
to reject, press [Options], select “Block List” and
“Block User”.
• To remove a member from the Watchers List,
highlight the member you wish to remove, press
[Options], select “Remove Watcher” and press [Yes]
after step 3.
Settings for Client
A
→
“Vodafone Messenger”
1. Press [Options] and select “Settings”.
2. Select one of the following items.
“My Status”: Changes your connection
status to, “Online” or
“Busy”.
“Screen Name”: Changes your screen name.
“Automatic Sign In”: Sets whether or not to
automatically sign in.
“Block List”: Entrys a Block List and
Removes from a Block List.
56 Messaging
Messaging Settings
General Settings
A
→
“Messaging Settings”
→
“General Settings”
1. Select the item you wish to set up.
• “Home Download”:
Controls the message download timing inside
your network area.
“Always Download”: Downloads messages
immediately from the
server.
“Always Defer”: Defers message download.
• “Roaming Download”:
Controls the message download timing when
roaming outside of your network.
“Always Download”: Downloads messages
immediately from the
server.
“Always Defer”: Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Read Report”:
Enables or disables Read Report request.
• “Expiry Time”:
This indicates the number of days and hours for
which a message you send may remain
undelivered to the message recipient. During this
period, the message service centre will
continually try to deliver the message to the
recipient.
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying
the sender when you receive an MMS/SMS.
• “Read Report Allow”:
Enables or disables Read Report Allow when the
recipient is required to inform the sender that the
message has been read.
(M 4-10)
(M 4-10-1)
Messaging 57
• “Edit Signature”:
Opens the screen to enter the signature.
• “Auto Delete”:
Deletes the oldest message automatically, when
the Inbox, Sent or both (Inbox and Sent) is full.
• “Automatic Resend”:
Tries to resend the failed SMS/MMS message up
to two times (“On” or “Off” selection).
• “Message List View”:
Switches the mailbox listing between “One-line
View” and “Two-line View”.
SMS Settings
A
→
“Messaging Settings”
→
“SMS Settings”
1. Select the item you wish to set up.
• “Message Centre”:
Enter the message centre number.
If you wish to enter a country code for a message
to an international number, press and hold Q
until a + sign is displayed.
• “Message Format”:
Select the message format to be used when
creating a new message.
• “Reply Path”:
Accepts or rejects the same reply path with the
send path when receiving the reply message for
your message.
• “Optimisation”:
When set “On” (default), double-byte characters
such as European characters with an accent are
converted into single-byte characters and sent.
When “Off”, double-byte characters are sent as
displayed.
Please note that you may be charged double for
double-byte characters sent in an SMS when
Optimisation is set “Off”.
(M 4-10-2)
58 Messaging
MMS Settings
A
→
“Messaging Settings”
→
“MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New”
to enter the following settings.
“Profile Name”: MMS profile name (Unique
name)
“Proxy”: Proxy setting for MMS
“Relay Server URL”:MMS relay server
• “Slide Duration”:
Sets the duration of the slide.
• “Max Message Size”:
Sets the maximum message size for sending and
disables sending MMS messages exceeding that
size.
• “Creation Mode”:
When set to “Free”, you can attach files of any
format to the mail. When set to “Restricted”, only
certain formats and message sizes can be
attached. The “Restricted” setting has priority
over “Max Message Size”.
Email Settings
A
→
“Messaging Settings”
→
“Email Settings”
1. Select the item you wish to set up.
• “Email Accounts”:
Select the desired account or select “Create New”
to enter the following settings.
“Account Name”: Email account name
(Unique name)
“POP3 Server”: Server name, user ID,
password and port number
for POP3 server
“SMTP Server”: Server name, user ID,
password, port number for
SMTP server and SMTP
Authentication
“Access Point”: Access point for Email
“Email Address”: Email address
• “Download Interval”:
Sets the download interval.
• “Max Message Size”:
Sets the maximum message size for sending and
disables sending Email messages exceeding that
size.
(M 4-10-3) (M 4-10-4)
Messaging 59
Messenger Settings
A
→
“Messaging Settings”
→
“Messenger Settings”
1. Select “Create New” to enter the following setting.
“Profile Name”: Messenger profile name
(Unique name)
“Proxy”: Proxy setting for Messenger
“URL”: Messenger relay server
“Messenger ID”: Your ID for Messenger
“Password”: Password for Messenger
Note
• In normal operations, you do not need to change the
settings.
• Messenger settings have already been entered in
your phone depending on your service provider. You
may have restrictions on viewing, deleting, copying
or modifying the settings. Contact your service
provider for details.
(M 4-10-5)
60 Vodafone live!
Vodafone live!
Your phone is already configured to access Vodafone
live! and the mobile internet*.
Vodafone live! is a new mobile internet portal which is
your gateway to a new world of information, games,
music and services.
Because your phone uses GPRS, a system that is much
faster than previous ways of getting mobile
information. Also, the connection is ‘always on’ which
means there is no need to wait for dialling up. You only
have to pay for the data you send or receive, not how
long you’re connected.
* If you have problems getting connected, please
phone Vodafone Customer Support.
Your phone contains a WAP browser used for surfing
on the Mobile Internet, where you can get a lot of useful
information. Normally, pages are designed for a mobile
phone.
Main Menu
“Vodafone live!”
→
“Vodafone live!”
The Vodafone live! service page is displayed.
“Vodafone live!”
→
“Enter URL”
The URL entry screen is displayed, allowing you to
jump to a site.
“Vodafone live!”
→
“Bookmarks”
See page 61.
“Vodafone live!”
→
“Alert Inbox”
WAP Push alerts are displayed.
“Vodafone live!”
→
“Saved Page”
The saved screenshots are displayed.
“Vodafone live!”
→
“Access History”
The history of pages you have recently browsed is
displayed.
(M 2)
Vodafone live! 61
Navigating a WAP Page
•a b c d:
Move the highlights around in the screen.
• : Executes the option displayed in the lower
centre of the screen.
•A: Launches the browser option menu.
•C: Selects an action displayed in the lower
right of the screen.
Used to access “Vodafone live!” by
opening the browser.
•F(short press):
Exits the browser.
(press and hold):
Turns off the phone.
Editing Bookmarks
“Vodafone live!”
→
“Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following
options:
“Select”: Selects a bookmark.
“Details”: Displays detailed
information of the WAP
page.
“Send Page”: Sends the URL address to
recipients.
“New”: Creates new folders or
bookmarks.
“Rename”: Renames bookmarks.
“Edit URL”: Edits URL address of the
bookmark.
“Move”: Moves bookmarks to
another location.
“Delete”: Deletes bookmarks.
“Delete All”: Deletes all bookmarks.
(M 2-3)
62 Vodafone live!
Browser Settings
“Vodafone live!”
→
“Browser Settings”
“Font Size”: Sets the size of the browsing
font.
“Scroll Step”: Sets the speed of scrolling.
“Send Referrer”: Enables or disables the
notification of the referrer.
“Cookies”: Adjusts the setting of
cookies.
“Downloads”: Categorises downloading
data from the images/
sounds/objects.
“Security”: Adjusts the security prompt
level.
“WAP Push”: Sets whether you need
confirmation for push
message.
“Download to”: Sets the download location.
The Browser Options
You can use various options of the WAP browser.
C
→
[Options]
“Select”: Selects a WAP page.
“Home”: Goes to the homepage.
“Bookmarks”: See page 61.
“Mark Page”: Marks the selected WAP
page.
“Save This Link”: Downloads the linked WAP
page data
“Save Items”: Saves items from WAP
pages.
“Enter URL”: Goes to the WAP page that
you enter the URL address
of.
“Access History”: Shows the history where
you have browsed.
“Forward”: Goes to the next page of the
pages displayed.
“Reload Page”: Reloads the WAP page
again to get new
information.
“Advanced”: Displays the advanced
menus.
“Exit”: Exits the browser.
(M 2-7)
Vodafone live! 63
The Advanced Options
C
→
[Options]
→
“Advanced”
“Saved Page”: The saved screenshots are
displayed.
“Save This Page”: Saves the WAP page as the
local file.
“Send Page”: Sends the WAP page data.
“Details”: Shows detailed information
of the WAP page.
“Browser Data”: Edits the browser data. You
can clear the cache/cookies/
history.
“Search This Page”: Searches specific words in
the WAP page.
“Copy Text”: Copies the text on the web
page.
“Browser Settings”: Displays the Settings
menus.
“Restart Browser”: Restarts the browser.
“About”: Displays the browser
information.
64 Music
Music
Music Player
Music Player supports MP3, MPEG-4, 3GPP and
REAL-AUDIO format sound files (support codec of
MPEG-4 or 3GPP are AMR, AAC and AAC+). While
playing back sound files in the background, you can use
other menus.
Adding a New Playlist
You can create your own playlist, storing and managing
your favorite tracks and the order of tracks.
“Music”
→
“My Music”
→
“Playlists”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
Note
• To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
• You can create up to 99 playlists.
Playing Back Sound Files
“Music”
→
“My Music”
1. Select the item you wish to play back.
• “All Music”:
All sound files are displayed.
• “Artists”:
The names of all artists are displayed.
When an artist is selected, all of his and her
albums are displayed.
When an album is selected, all of the sound files
in the selected album are displayed.
•“Albums”:
The names of all albums are displayed.
When an album is selected, all of the sound files
in the selected album are displayed.
• “Playlists”:
All playlists are displayed.
When any playlist is selected, all of the sound
files in the selected playlist are displayed.
2. Select the desired sound file.
To pause playback, press .
To stop playback, press [Back].
(M 3)
(M 3-2)
Music 65
Note
• You are asked whether or not to play sounds when the
Silent mode is activated.
• To play the last played file, select “Last Played
Music”. “Currently Playing” is displayed when the
file is being played back.
• When you receive a call, playback of the current file
is paused, and you can receive the call. After the call
ends, the paused playback resumes automatically in
the background.
Tip
• You can return to the Main menu screen while
playing back the file in the background.
• You can create your playlist by listing only the
desired files (p. 64).
• Sound files in both the handset and the memory card
are displayed in a single.
• You can select the playback pattern in step 2. Press
[Options] and select “Playback Pattern”.
“Normal”: Plays back all files in the selected
folder once and stops playback.
“Repeat”: Continues playback in the selected
folder.
“Repeat All”: Plays back all files in the selected
folder.
“Random”: Plays back files in the selected folder
at random.
• You can control the Music Player by using the
following keys:
a/b: Increases or decreases the volume.
b (press and hold): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (press and hold): Fast-forwards.
c (press and hold): Rewinds.
F: Plays back the file in the background.
• While the phone is closed, you can control the Music
Player by the Audio keys (P. 67).
66 Music
Sorting Files
“Music”
→
“My Music”
→
“All Music”
1. Press [Options] and select “Sort”.
2. Select “By Title”, “By Artist”, “By Album” or “By
Genre”.
Sort results are displayed.
Adding a File to the Playlist
You can create a playlist registering desired files.
“Music”
→
“My Music”
→
“All Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a
playlist, see “Adding a New Playlist”.
3. Select the desired folder.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file in
the playlist and press [Options]. Then select “Delete
from Playlist”.
Note
• You can store up to 99 files in one playlist. However
the total number of files stored on your phone cannot
exceed 350 files.
Music 67
Key functions with the phone closed
PLAY/PAUSE: Music menu is displayed on the external display. (no matter if a sound file is played in the
background)
PLAY/PAUSE (press and hold): The last played music is played. (when the last ended item was Music Player)
*1: When playing back sound files in the background, Music Player continues playback.
*2: Music Player is playing in the background.
Menu Screen Playing Screen
g
PLAY
PAUSE
Press Selects the item. Pauses.
Press and Hold - Quits Music Player.
h
SKIP up
CUE
Press Moves the cursor down. Jumps to the next file.
Press and Hold Moves the cursor down quickly. Fast-forwards.
f
SKIP down
REV
Press Moves the cursor up. Returns to the top portion of the current file.
Press and Hold Moves the cursor up quickly. Rewinds.
i
Back Key
Press Returns to the previous screen.
Returns to the previous screen.
Press and Hold Returns to the standby screen.*1 Returns to the standby screen.*2
V
Side-Up Key
Press Moves the cursor up. Increases the volume.
Press and Hold Moves the cursor up quickly. -
W
Side-Down
Key
Press Moves the cursor down. Decreases the volume.
Press and Hold Moves the cursor down quickly. Mutes.
68 Music
FM Radio
Your phone has a built-in FM radio tuner that allows
you to enjoy the stereo sound of FM radio. There’s no
charge for listening to FM radio.
Playing FM Radio
“Music”
→
“Radio”
1. Select a station.
Select a station from the station list (P. 69), by the
keypad to select directly (P. 70) or by c/d to adjust
the frequency by 0.05 MHz.
To adjust the volume, press a (up) or b (down).
To mute, press and hold b.
To exit, press [Back].
Note
• FM radio frequencies can be received within the
range 87.50MHz to 108.00MHz.
• You can play FM radio only on the Stereo Headset.
• When you use the Stereo Headset to call, FM radio is
pauses.
• When you receive a calls, FM radio is paused, and
you can receive the call. After the call ends, the
paused FM radio resumes automatically in the
background.
Tip
• You can return to the Main menu screen with FM
radio on in the background.
• While the phone is closed, you can control FM radio
by the Audio keys (P. 72).
Auto Scan
You can search receivable stations automatically.
“Music”
→
“Radio”
1. Press and hold c (higher frequencies)/d (lower
frequencies).
When a receivable station is found, the search stops
to play the radio at the frequency.
Entering a Frequency Directly
“Music”
→
“Radio”
1. Press [Options] and “Search”.
2. Select “Enter Frequency” and enter the frequency
by digit keys.
(M 3-3)
Music 69
Setting Stations Automatically
You can register 12 receivable stations in the station list
as channel information.
“Music”
→
“Radio”
1. Press [Options] and select “Search”.
2. Select “Auto Scan & Save”.
The saved stations are displayed.
Setting Stations Manually
“Music”
→
“Radio”
Select the station you wish to save to your station list.
1. Press [Options] and select “Save Station”.
2. Select the station you wish to preset.
3. Enter the desired station name and press .
4. Press [Save].
Station List
You can register up to 24 radio stations to the station
lists (two lists, each 12 stations). You can listen to a
desired station by selecting it from your station list.
Selecting from Station List
“Music”
→
“Radio”
1. Press [Options] and select “Select Station”.
The station list 1 or 2 opens.
2. Select the desired station.
Tip
• To switch between station lists, press [Options] and
select “Settings”, then “Switch List to” to select
either “List1” or “List2”.
70 Music
Option of Station List
“Music”
→
“Radio”
1. Highlight the change station after step 1 in
“Selecting from Station List”.
2. Press [Options] and select one of the following
options.
“Edit”: Edits the name of the station and its
frequency.
“View”: Views properties.
“Move”: Moves the station in the station list.
“Delete”: Deletes the station.
Direct Select
Each of the stations in the selected station list are
assigned to a key.
G to O → Station no.1 to 9
P → Station no.10
Q → Station no.11
R → Station no.12
Tip
• You can press and hold the key to replace as assigned
frequency with the current one.
Auto Switch-off
You can set the time that FM radio is automatically
turned off from 30, 60 or 90 minutes later.
“Music”
→
“Radio”
1. Press [Options] and select “Settings”.
2. Select “Auto Switch Off”.
3. Select the desired options.
Power Saving
You can turn off the display to save the power. (FM
radio is still available.)
“Music”
→
“Radio”
1. Press [Options] and select “Settings”.
2. Select “Power Saving”.
Note
• When the display is off, you can adjust the volume or
mute sound by a/b.
• To restore the display, press any key other than a/
b.
Music 71
Other Settings
“Music”
→
“Radio”
1. Press [Options] and select “Settings”.
2. Select one of the following options.
“Sound Output”: Selects Headset or Loudspeaker
to listen to FM radio.
“Close Phone”: Selects FM radio to continue or
end when the phone is closed.
“Switch to Mono”: Changes to monaural sound. To
change back to stereo sounds,
select “Switch to Stereo”.
Note
• FM radio uses the wire of the headset as an antenna.
Please be sure to use the bundled Stereo Headset
when listening to FM radio broadcasts.
• FM radio broadcasts cannot be recorded.
• The optional Audio Remote-Controller cannot used
when listening to FM radio broadcasts.
• Radio station reception may differ depending on the
region.
• Listen to radio at a moderate level. Continuous
exposure to high volume may cause to damage your
hearing.
• When an application sends or receives data using a
GPRS and CSD connection, it may cause to interfere
with the radio.
72 Music
Key functions with the phone closed
PLAY/PAUSE: Music menu is displayed on the external display. (no matter if a track is played in the background)
PLAY/PAUSE (press and hold): FM radio or Music Player is played, whichever was used last.
*1: When playing in the background, FM radio continues playing.
*2: FM radio is playing in the background.
Menu Screen Playing Screen
g
PLAY
PAUSE
Press Selects the item. -
Press and Hold - Quits FM radio.
h
SKIP up
CUE
Press Moves the cursor down. Jumps to the next station in the station list.
Press and Hold Moves the cursor down quickly. Auto scan (up).
f
SKIP down
REV
Press Moves the cursor up. Returns to the previous station in the station
list.
Press and Hold Moves the cursor up quickly. Auto scan (down).
i
Back Key
Press Returns to the standby screen. Returns to the Music menu.
Press and Hold Returns to the standby screen.*1 Returns to the standby screen.*2
V
Side-Up Key
Press Moves the cursor up. Increases the volume.
Press and Hold Moves the cursor up quickly. -
W
Side-Down
Key
Press Moves the cursor down. Decreases the volume.
Press and Hold Moves the cursor down quickly. Mutes.
My Items 73
My Items
My Items contains several types of picture, sound and
video clip data. Also included in My Items are
frequently used text message phrases and WAP sites
which you can use for downloading. You can also
transmit picture, sound and video clip data via
Bluetooth wireless technology to OBEX-enabled
phones.
Pictures
Pictures that are taken by a digital camera or images
that are downloaded from mobile Internet sites can be
managed. You can register pictures in the following
formats: JPEG, PNG, WBMP and GIF.
Viewing Pictures
“My Items”
→
“Pictures”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Select the desired file.
3. Select the file you wish to view.
The selected picture is displayed.
Using Images as Wallpaper
“My Items”
→
“Pictures”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Saving an Image to Contacts List Entries
You can use this option only for pictures saved in the
handset memory.
“My Items”
→
“Pictures”
1. Highlight the file you wish to add to Contacts List.
2. Press [Options] and select “Add to Contact”.
To overwrite, select the data you wish to save.
To save as a new entry, select “As New Contact”.
For details on entering a name, see “Add New
Contact” on page 29.
(M 6)
(M 6-1)
74 My Items
Editing Pictures
“My Items”
→
“Pictures”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Picture Editor”.
3. Select the desired option.
Note
• “Picture Editor” may not be available depending on
the original picture and copyright issued.
Adjusting the Size
You can adjust the picture to an appropriate size
depending on the scene.
“My Items”
→
“Pictures”
1. Highlight the file you wish to adjust the size of.
2. Press [Options] and select “Resize”.
3. Select the desired option.
Note
• “Resize” may not be available depending on the
original picture and copyright issued.
Tip
• For other option menus, see “Common Option
Menus” on page 77.
Downloading Picture Files
“My Items”
→
“Pictures”
→
“Get new”
The picture file download site is displayed.
Music & Ringtones
The downloaded sound files and the AMR data
recorded by Voice Recorder are managed in Music &
Ringtones. The default ringtones are not contained
within Music & Ringtones. Only the sound files that
can be played back on the phone are stored in Music &
Ringtones.
Playing Back Sound Files
“My Items”
→
“Music & Ringtones”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Select the file you wish to play back.
To stop playback, press .
Note
• Playback may not be available for some sound files.
(M 6-2)
My Items 75
Using the Sound Files as a Ringtone
“My Items”
→
“Music & Ringtones”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
Tip
• For other option menus, see “Common Option
Menus” on page 77.
Downloading Sound Files
“My Items”
→
“Music & Ringtones”
→
“Get new”
The sound file download site is displayed.
Videos
Video clips that are recorded by a video camera or
downloaded from mobile Internet sites can be
managed.
Playing Back Video Clip Files
“My Items”
→
“Videos”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Select the file you wish to play back.
To pause playback, press .
To resume, press again.
To stop playback, press [Back].
Using a Video Clip as a Ring Video
You can set your video clip to play back when the
phone rings.
“My Items”
→
“Videos”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Tip
• For other option menus, see “Common Option
Menus” on page 77.
Downloading Video Clip Files
“My Items”
→
“Videos”
→
“Get new”
The video clip file download site is displayed.
(M 6-4)
76 My Items
Themes
You can easily customise the display of GX40, by using
the theme files.
The theme files that are downloaded from mobile
Internet sites can be managed.
Viewing Previews
“My Items”
→
“Themes”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2.
Highlight the theme file you wish to view the preview.
3. Press [Options] and select “Preview”.
The selected theme file is displayed.
Setting Theme
“My Items”
→
“Themes”
1. Select the desired theme file.
The selected theme file is set as the default theme.
Tip
• Even after a theme is set, you can set a wallpaper
regardless of the set theme. In this case, the other
items follow the set theme.
• For other option menus, see “Common Option
Menus” on page 77.
Note
• If you set your original image as a wallpaper, the
screen asking you to choose “Use Current
Wallpaper” or “Use Theme Wallpaper” is displayed
after step 1.
Downloading Theme Files
“My Items”
→
“Themes”
→
“Get new”
The theme file download site is displayed.
Other Documents
Some types of files are stored in the Other Documents
folder of the phone. You can edit and use these files as
My Items data.
Opening the Document File
“My Items”
→
“Other Documents”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Select the desired file.
Tip
• For other option menus, see “Common Option
Menus” on page 77.
(M 6-6)
(M 6-8)
My Items 77
Common Option Menus
Activating Files with Copyright Protection
(DRM)
Some pictures, sound files, video clips and theme files
have a digital copy protection program, which is called
DRM (Digital Rights Management). You need to
activate the digital licence permission to open the files.
Files protected with DRM are displayed with .
Select the appropriate option.
“My Items”
→
“Pictures”
“My Items”
→
“Music & Ringtones”
“My Items”
→
“Videos”
“My Items”
→
“Themes”
“My Items”
→
“Other Documents”
1. Highlight the file you wish to activate.
2. Press [Options] and select “Activate”.
Note
• Some pictures with DRM may not open even when an
attempt is made to activate it.
Sending My Items Data
Select the appropriate option.
For except theme files
“My Items”
→
“Pictures”
“My Items”
→
“Music & Ringtones”
“My Items”
→
“Videos”
“My Items”
→
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For theme files
When sending the theme files, you can do it via
Bluetooth only.
“My Items”
→
“Themes”
1. Highlight the desired file.
2. Press [Options] and select “Send Via Bluetooth”.
Tip
• For details on creating a message, see “Creating a
New Message” on page 44.
• For details on Bluetooth settings, see “Bluetooth” on
page 120.
78 My Items
Note
• Pictures/Sounds/Video clips protected by copyright
cannot be sent attached to a message, with the
exception of Separate Delivery files.
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
• When you send a picture file, select “As Postcard” in
step 3. The Postcard service is not available with
some providers. Contact your service provider for
more information.
Receiving My Items Data
When the phone receives My Items data, a confirmation
message is displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding My
Items folder.
Tip
• For details on Bluetooth wireless settings, see
“Connectivity” on page 120.
Using My Items Data
You can copy, move, sort, rename, and delete the saved
My Items data.
Select the appropriate option.
“My Items”
→
“Pictures”
“My Items”
→
“Music & Ringtones”
“My Items”
→
“Videos”
“My Items”
→
“Themes”
“My Items”
→
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Advanced”.
3. Select the desired option.
“Move”: Moves files to another folder.
Select the desired folder to move
to.
“Copy”: Copies files. Select the desired
folder to copy to.
“Create Folder”: Creates a new folder.
“Multiple Select”: Selects multiple files.
“Sort”: Sorts the file. Select the desired
files to sort.
Note
• When you select “Themes”, you can select “Move”,
“Copy” and “Sort” only in step 3.
My Items 79
To Rename the File
Select the appropriate option.
“My Items”
→
“Pictures”
“My Items”
→
“Music & Ringtones”
“My Items”
→
“Videos”
“My Items”
→
“Themes”
“My Items”
→
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
To Delete the File
“My Items”
→
“Pictures”
“My Items”
→
“Music & Ringtones”
“My Items”
→
“Videos”
“My Items”
→
“Themes”
“My Items”
→
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
To See the My Items Details
Select the appropriate option.
“My Items”
→
“Pictures”
“My Items”
→
“Music & Ringtones”
“My Items”
→
“Videos”
“My Items”
→
“Themes”
“My Items”
→
“Other Documents”
1. Highlight the file you wish to view the details of.
2. Press [Options] and select “Details”.
Uploading My Items Data
You can upload your picture, sound or video clip files
to the Media Album.
“My Items”
→
“Pictures”
“My Items”
→
“Music & Ringtones”
“My Items”
→
“Videos”
1. Highlight the file you wish to upload.
2. Press [Options] and select “Send”.
3. Select “To Media Album”.
80 My Items
Note
• This service is not available with some service
providers. Please contact your service provider for
more information.
• Picture, sound and video clip files protected with a
copyright cannot be uploaded.
Selecting Multiple Files
You can select more than one item from My Items for
moving, copying and deleting.
Note
• The following procedure applies when the entries
other than any theme file or “Get new” are
highlighted.
Select the appropriate option.
“My Items”
→
“Pictures”
→
[Options]
“My Items”
→
“Music & Ringtones”
→
[Options]
“My Items”
→
“Videos”
→
[Options]
“My Items”
→
“Other Documents”
→
[Options]
1. Select “Advanced”.
2. Select “Multiple Select”.
3. Press to check the desired file names.
4. Press [Options] and select the desired option.
Tip
• To remove the check, select the file again or select
“Unselect” in step 4.
• If you wish to select all files, select “Select All” in
step 4. To unselect all, select “Unselect All”.
My Items 81
Games & Applications
For details on Vodafone specific applications, see
“Games & Applications” on page 82.
Text Templates
You can register up to 50 text templates for use in text
messages and multimedia messages. A maximum of
256 characters can be used for a single text template.
Adding Phrases to Text Templates
“My Items”
→
“Text Templates”
→
“Add New
Template”
1. Enter the text and press .
Editing Text Templates
“My Items”
→
“Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press [Options] and
select “View”.
To delete the text template, press [Options] and
select “Delete”.
3. Modify the text and press .
Sending Text Templates
“My Items”
→
“Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
Memory Status
This function helps you to check the memory status of
the handset memory or memory card. Memory status
covers the following.
Handset Memory: Applications, Pictures, Videos,
Sounds, Themes, Others, Total
and Free
Memory Card: Pictures, Videos, Sounds,
Themes, Others, Total and Free
“My Items”
→
“Memory Status”
1. Select “Handset Memory” or “Memory Card”.
(M 6-3)
(M 6-5)
(M 6-7) (M 6-9)
82 Entertainment
Entertainment
Games & Applications
Using Applications
Various kinds of Vodafone specific applications can be
used on this phone. To use applications, download the
applications via the mobile Internet. Some applications
offer the ability to connect to a network either within a
game or a network based application.
Note
• Applications may be both localised (no connectivity)
and network based (using the mobile Internet to
update information/play games). The network may
charge you more for using network-based
applications. Please contact your service provider
for more information.
Downloading Applications
“Entertainment”
→
“Games & Applications”
→
“Games”
→
“More Games”
“Entertainment”
→
“Games & Applications”
→
“Applications”
→
“More Applications”
1. Select the desired application.
Before downloading the application you are asked
to confirm what you are about to receive. After
checking the information on the confirmation
screen, the application can be downloaded.
2. Press to start downloading.
3. Press when finished.
Note
• User authentication may be required before
downloading the application on some information
screens.
(M 1)
(M 1-1)
Entertainment 83
Executing Applications
“Entertainment”
→
“Games & Applications”
→
“Games” or “Applications”
1. Select the title of the application you wish to
execute.
The selected application is executed. When using
network connection type applications, connection
to the network can be selected.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Main Display
“Entertainment”
→
“Games & Applications”
→
“Games” or “Applications”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
Setting Permission
You can set permission for selected Java™
applications.
“Entertainment”
→
“Games & Applications”
→
“Games” or “Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”: Sets permission to make voice
calls.
“Network Access”: Sets permission to access the
network.
“Messaging”: Sets permission to perform
MMS and SMS messaging.
“Autorun”: Sets permission to perform the
Autorun function.
“Local Connection”: Sets permission to connect to
local devices.
“Read User Data”: Sets permission to read user
data, such as Contacts List
entries, mailbox (Inbox) and
My Items data.
“Write User Data”: Sets permission to write
entries in your phone, such as
Contacts List entries, mailbox
(Inbox) and My Items data.
“Use Multimedia”: Sets permission to use the
multimedia recording.
84 Entertainment
4. Select one of the following options:
“Session”: The confirmation message is
not displayed until you exit
the application, while
execution of the API of the
specified function group is
authorised.
“Ask Once ”: The confirmation message is
displayed every time the API
of the specified function
group is executed.
“Blanket”: The confirmation message is
not displayed until the
application is deleted or you
change the settings, while
execution of the API of the
specified function group is
authorised.
“No”: Execution of the API of the
specified function group is not
authorised.
Note
• To clear all the permission settings, select “Reset” in
step 3.
• All permissions are not available for all Java™
applications.
Viewing Application Information
You can check the information of Java™ applications.
“Entertainment”
→
“Games & Applications”
→
“Games” or “Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Moving or Deleting an Application
You can move or delete an application.
“Entertainment”
→
“Games & Applications”
→
“Games” or “Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Move” or “Delete”.
Entertainment 85
Settings
Application Volume
You can set the volume of the application such as the
sound effect to one of the five levels or silent. When
“Volume” (p. 108) is set to “Silent”, this setup has
priority.
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Application Volume”
1. Press a (or d) to increase the volume or press b
(or c) to decrease the volume and then press .
Backlight
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Backlight”
→
“Switch On/Off”
1. Select from “Always On”, “Always Off” or
“Normal Settings”.
“Always On”: Lit while the application is
operated.
“Always Off”: Unlit while the application is
operated even if a key is
pressed.
“Normal Settings”: Works with the main
backlight setting (p. 114).
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off”, the backlight cannot be
turned on from the application.
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Backlight”
→
“Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Vibration”
1. Select from “On” or “Off”.
(M 1-1-3)
86 Entertainment
Calls & Alarms
You can set the priority of incoming calls and alarms
while an application is operating.
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Calls & Alarms”
1. Select “Incoming Call”, “Incoming Message” or
“Alarm”.
2. Select the desired method.
• “Call Priority”, “Message Priority” or “Alarm
Priority”:
The application is suspended automatically, and you
can receive a call or a message, or the alarm will
sound. After finishing the call or the message, or the
alarm ends, the suspend indicator ( ) is displayed
letting you know there is a suspended application.
• “Call Notice”, “Message Notice” or “Alarm Notice”:
The marquee (character scrolls) is displayed on the
first line of the screen while the application
continues. If you press D, the application is
suspended, and you can receive a call or a message.
After finishing the call or the message, the suspend
indicator ( ) is displayed letting you know there is
a suspended application.
Screensavers
You can download screensaver applications for the
standby screen and set the time period for the
screensaver to activate.
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Screensavers”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Set the Activation Time
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Screensavers”
→
“Activation Time”
1. Enter the activation time in two digits using the
keypad.
Entertainment 87
To Set the Suspend Time
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Screensavers”
→
“Suspend Time”
1. Set the desired time period from “after 15 min.” to
“after 6 hours”.
Default Settings
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Set to Default”
1. Enter your handset code.
Clearing All Memory
“Entertainment”
→
“Games & Applications”
→
“Settings”
→
“Memory All Clear”
1. Enter your handset code.
Java™ Information
“Entertainment”
→
“Games & Applications”
→
“Java™ Information”
The information about the licences belonging to Java™
is displayed.
Video
Playing Back Video Clip Files
“Entertainment”
→
“Video”
→
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select the desired file.
To pause playback, press .
To stop playback, press [Back].
Tip
• You can control the Video Player by using the
following keys:
a/b: Increases or decreases the volume.
b (press and hold): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (press and hold): Fast-forwards.
c (press and hold): Rewinds.
(M 1-1-4)
(M 1-2)
(M 1-2-2)
88 Entertainment
Searching a File to Be Played Back
“Entertainment”
→
“Video”
→
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Press [Options] and select “Search”.
4. Enter the first few letters of the title.
Search results are displayed in alphabetical order
and the matching file is highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
“Entertainment”
→
“Video”
→
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Highlight the file you wish to add to the playlist.
4. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a
playlist, see “Adding a New Playlist” on page 88.
5. Select the desired folder.
6. Press .
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the file in
the playlist and press [Options]. Then select “Delete
from Playlist”.
Adding a New Playlist
“Entertainment”
→
“Video”
→
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Press [Options] and select “Add New Playlist”.
3. Enter the desired playlist name.
4. Press .
Note
• To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Entertainment 89
Editing the Video Clip File
“Entertainment”
→
“Video”
→
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the file you wish to edit.
4. Press [Options] and select “Edit”.
5. Select the desired option.
“Crop”: Select the desired area to be cropped.
“Subtitle”: Create a subtitle to add to the file.
Settings
You can select a play mode for “Playback Pattern”,
“Backlight” and “Display Size” when playing back
video clip files.
“Entertainment”
→
“Video”
→
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the file for which you wish to adjust the play
mode.
4. Press [Options] and select “Settings”.
5. Select from “Playback Pattern”, “Backlight” or
“Display Size”.
6. Select from the following:
• “Playback Pattern”
“Repeat”: Continues playback in the
selected folder.
“Repeat All”: Plays back all files in the
selected folder.
“Random”: Plays back files in the
selected folder at random.
• “Backlight”
90 Entertainment
“Always On”: Lit while the file is played
back.
“Always Off”: Unlit while the file is played
back even if a key is pressed.
“Normal Settings”: Works with the main
backlight setting (p. 114).
•“Display Size”
“Original Size”: Displays the file in its
original size.
“Enlarge”: Displays the file in an
enlarged size.
“Full Screen”: Displays the file on the full
screen.
Playing Back the Video Clip Files
To Play Back the Last File
“Entertainment”
→
“Video”
→
“Last Played Video”
(M 1-2-1)
Calendar 91
Calendar
Calendar allows you to easily schedule appointments or
events at any given date or time.
These entries can also be sent via Bluetooth wireless
technology to a PC to share the same schedules. When
you exchange entries with other devices, the date and
time displayed may be different to that of the original
data depending on the data format of the receiving
device.
Creating a New Entry
“Calendar”
1. Select the desired day to which you want to add an
event.
2. Select “Add New Entry”.
3. Enter the subject.
4. Select the desired category.
5. Enter the start date and time.
6. Select the duration.
When selecting “Other”, enter the desired end date
and time.
7. Select the reminder time.
When selecting “Other”, enter the desired reminder
date and time.
8. Press [Save].
Note
• If the date and time settings have not been entered,
the date and time entry screen is displayed (p. 116).
• The reminder will not sound when “Volume” (p. 108)
is set to “Silent”.
(M 11)
92 Calendar
To Change the Type of the Reminder Tone or
Video
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset
Sounds” or “My Sounds”, or select “Assign Video”.
4. Select the desired sound or video clip file.
For details on selecting a tone, see “Assigning a
Ringtone” on page 109.
To Change the Duration of the Reminder Tone or
Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the time period.
When you select “Other”, you can enter the desired
time in two digits using the keypad.
To Change the Repeat Option of the Reminder
1. On the New Entry screen, select “Repeat”.
2. Select the desired repeat option.
To Enter the Location
1. On the New Entry screen, select “Location”.
2. Enter the location for the schedule entry.
To Enter the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the schedule entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off”
to leave it as it is.
Calendar 93
Viewing a Schedule Entry
“Calendar”
1. Select the day you wish to view.
To Search By Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to
enter the desired date.
Tip
• In the monthly or weekly view, you can control the
view by using the following:
Monthly view
P: Displays the previous month.
R: Displays the next month.
Q: Displays the weekly view.
K: Moves the cursor to today.
c/d: Moves the cursor to left (the previous day)
or to right (the next day).
a/b: Moves the cursor upward (last week) or
downward (next week).
Weekly view
P: Displays the previous week.
R: Displays the next week.
Q: Displays the monthly view.
K: Moves the cursor to today.
c/d: Moves the cursor to left (the previous day)
or to right (the next day).
a/b: Moves the weekly view up or down (the
previous hour or next hour).
Setting a Holiday
In the weekly or monthly view, you can highlight date
or days of the week with seven colour options.
“Calendar”
For date colour
1. Select the day you wish to set.
2. Press [Options] and select “Set Holiday”.
3. Select “By Date” and then select the desired colour.
94 Calendar
For days of the week colour
1. Press [Options] and select “Set Holiday”.
2. Select “Enter Date” and then select the week you
wish to set.
3. Select the desired colour.
Tip
• This setting is reflected to the calendar on the
standby screen.
Note
• If the same date is set with both a date colour and a
day of the week colour, the date is highlighted in the
date colour.
• Up to 100 days can be set for the highlights.
Finding a Schedule Entry
“Calendar”
1. In any view, press [Options] and select “Find”.
2. Enter the first few letters of the subject.
Search results are displayed in time order.
Editing a Schedule Entry
“Calendar”
1. Select the day you wish to edit.
2. Press [Options] and select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day”: Deletes all entries for the
selected day.
“All This Week” (weekly view):
Deletes all entries for the
selected week.
“Up to Last Week” (weekly view):
Deletes all entries before this
week.
Calendar 95
“All This Month” (monthly view):
Deletes all entries for the
selected month.
“Up to Last Month” (monthly view):
Deletes all entries before this
month.
“All Appointments” (weekly and monthly view):
Deletes all entries in this
application.
Sending a Schedule Entry
“Calendar”
1. Select the day including schedule entries you wish
to send.
2. Press [Options] and select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 120.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Receiving a Schedule Entry
When the phone receives a schedule entry, a
confirmation message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
• For details on entering Bluetooth wireless settings,
see “Connectivity” on page 120.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory
Status”.
96 Organiser & Tools
Organiser & Tools
Alarms
Setting the Alarms
The alarm function allows you to be alerted at a
specified time.
Note that you need to set the current date and time
before setting the alarm function if it has not been done
already.
“Organiser & Tools”
→
“Alarms”
1. Select the blank setting.
2. Enter the desired time.
3. Press [Save].
To Change the Type of Repeat Options
1. On the Set Alarm screen, select “Repeat”.
2. Select from “Once Only”, “Every Day” or “Selected
Days”.
“Once Only”: The alarm sounds once only.
“Every Day”: The alarm sounds every day at
the specified time.
“Selected Days”: The alarm sounds on the selected
day of the week at the specified
time.
To Change the Type of Alarm Tone or Video Clip
File
1. On the Set Alarm screen, select “Assign Tone/
Video”.
2. Select “Assign Tone” and then select “Preset
Sounds” or “My Sounds”, or select “Assign Video”.
3. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a
Ringtone” on page 109.
To Change the Snooze of the Alarm Tone
1. On the Set Alarm screen, select “Snooze”.
2. Select the desired snooze option.
(M 7)
(M 7-1)
Organiser & Tools 97
To Change the Alarm Volume
1. On the Set Alarm screen, select “Alarm Volume”.
2. Press a (or d) to increase the volume or press b
(or c) to decrease the volume.
Note
• The alarm will not sound when “Alarms Volume” is
set to “Silent”. When the profile is set to “Silent”, the
“Volume” setting (p. 108) has priority.
To Change the Vibration of Alarm Tone
1. On the Set Alarm screen, select “Vibration”.
2. Select “On”, “Link to Sound” or “Off”.
For details on selecting a vibration, see “Vibration”
on page 111.
To Change the Duration of the Alarm Tone
1. On the Set Alarm screen, select “Duration”.
2. Select the desired duration.
Resetting an Alarm Setting
“Organiser & Tools”
→
“Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarm Settings
“Organiser & Tools”
→
“Alarms”
1. Select “Clear All”.
98 Organiser & Tools
Calculator
The calculator function performs the 4 arithmetic
calculations using up to 12 digits.
“Organiser & Tools”
→
“Calculator”
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press
[Clear].
To do the calculations, press .
To start a new calculation, press [Clear].
Rate Conversion
You can also use the calculator as a currency calculator
to convert from/to a home currency using a conversion
rate that you enter.
To Set a Currency Conversion Rate
“Organiser & Tools”
→
“Calculator”
→
[Options]
→
“Currency Converter”
→
“Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To Convert a Value
“Organiser & Tools”
→
“Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to
Foreign”.
(M 7-2)
Organiser & Tools 99
Voice Recorder
This allows you to record a voice clip, which can be
used to remind you of schedule entries or be sent within
a multimedia message. The recorded voice clip is saved
in Saved Sounds. Voice clips are saved in .amr format.
Recording a Voice Clip
“Organiser & Tools”
→
“Voice Recorder”
1. Press to start recording.
To stop recording before the recording time is over,
press .
2. Select “Save” to save the voice clip.
Note
• Press a (or V) or b (or W) to adjust the sound
volume when playing back the recorded file.
Sending Voice Clips
“Organiser & Tools”
→
“Voice Recorder”
1. Press to start recording.
2. Press to stop recording.
3. Select “Save and Send”.
4. Select “As Message”.
For details on creating a message, see “Creating a
New Message” on page 44.
Selecting the Record Time
“Organiser & Tools”
→
“Voice Recorder”
→
[Options]
→
“Record Time/Size”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are
automatically saved to a memory card.
Selecting Storage Memory
“Organiser & Tools”
→
“Voice Recorder”
→
[Options]
→
“Save New Sounds”
1. Select the desired location.
When selecting “Choose bef. Saving”, you can
select the location when saving a voice clip.
(M 7-3)
100 Organiser & Tools
E-Book
This function allows you to view E-Book files (XMDF
files) stored in an Other Documents folder of the phone
or a memory card.
“Organiser & Tools”
→
“E-Book”
1. Select the desired file.
To search in a dictionary, select a dictionary, press
and enter the keyword on the search screen.
2. Press to view.
To scroll the screen up and down (to previous or
new line), press a or b. To jump to the previous or
the following pages, press c or d.
3. Press F when finished.
Tip
• When a call arrives while the viewer is on or when
you exit an E-Book, “Auto Bookmark 1” is
automatically added on the last page you have
viewed. The page with the bookmark automatically
opens when you select the file the next time. The new
bookmark is now “Auto Bookmark 1”, turning the
previous bookmark to “Auto Bookmark 2”.
Adding a Bookmark
You can add up to two bookmarks to each E-Book file.
“Organiser & Tools”
→
“E-Book”
1. Select the desired file.
2. Press [Options] and select “Bookmark”.
3. Select “Bookmark 1” or “Bookmark 2”.
Note
• E-Book files cannot be viewed while “Music”,
“Games” or “Applications” is in use.
• If you remove the memory card while the E-Book is in
use, a confirmation message appears and your phone
returns to standby.
(M 7-8)
Organiser & Tools 101
Stopwatch
You can store 4 lap times when using the stopwatch
function.
“Organiser & Tools”
→
“Stopwatch”
1. Press to start.
Press [LAP] to view the lap time before the
stopwatch stops. Last 4 lap times are saved.
2. Press to stop.
Tip
• You can save a record of lap time and stop time in
Text Templates by pressing [Options] and selecting
“Save to Templates”.
Resetting Time
1. After stopping the stopwatch, press [Options] and
select “Reset”.
Tasks
You can register your schedule as task entries for a
given date or time.
Creating a New Entry
“Organiser & Tools”
→
“Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and time.
4. Press [Save].
Note
• If the date and time settings have not been entered,
the date and time entry screen is displayed (p. 116).
To Select the Reminder Time
1. On the New Entry screen, select “Reminder”.
2. Select “Reminder Time”.
3. Select the reminder time.
When selecting “Other”, enter the desired reminder
date and time.
(M 7-4) (M 7-5)
102 Organiser & Tools
To Change the Type of Alarm Tone or Video Clip
File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset
Sounds” or “My Sounds”, or select “Assign Video”.
4. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a
Ringtone” on page 109.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the desired duration.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off”
to leave it as it is.
Making the Entry Completed or Uncompleted
“Organiser & Tools”
→
“Tasks”
1. Highlight the desired entry.
2. Press .
3. On the view screen, press [Options] and select
“Check”.
To make the entry uncompleted, select “Uncheck”.
Finding a Task Entry
“Organiser & Tools”
→
“Tasks”
1. Press [Options] and select “Find”.
2. Enter the first few letters of the subject.
Search results are displayed in time order.
Organiser & Tools 103
Sending a Task Entry
“Organiser & Tools”
→
“Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 120.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Viewing the Memory Status
“Organiser & Tools”
→
“Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser & Tools”
→
“Tasks”
→
[Options]
→
“Delete”
1. Select the desired option.
“This Task”: Deletes the selected entry.
“All Completed Tasks”:Deletes all checked entries.
“All Tasks”: Deletes all entries.
World Clock
Setting the Time Zone
“Organiser & Tools”
→
“World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the
world map.
2. Press c or d to change the time zone.
3. Press .
To Set the Custom Time Zone
“Organiser & Tools”
→
“World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Options] and select “Set Custom Zone”.
3. Enter the desired city name and time.
Setting the Daylight Saving
“Organiser & Tools”
→
“World Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
(M 7-6)
104 Organiser & Tools
Countdown Timer
“Organiser & Tools”
→
“Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press to start counting.
3. Press to pause.
Press again to continue counting.
4. If the countdown has finished, press [Cancel] and
then press to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
Expenses Memo
You can record an expenses memo with predefined or
edited categories.
Recording in the Expenses Memo
“Organiser & Tools”
→
“Expenses Memo”
→
“Add
New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals
“Organiser & Tools”
→
“Expenses Memo”
→
“Totals”
Recorded expenses are displayed on the screen.
To Change Category
1. In the total view, select the desired item.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
(M 7-7) (M 7-9)
(M 7-9-1)
(M 7-9-2)
Organiser & Tools 105
To Change Amount
1. In the total view, select the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item or All Items
1. In the total view, select the desired item.
2. Press [Options] and select “Delete Item” or “Delete
All”.
Editing the Category Name
“Organiser & Tools”
→
“Expenses Memo”
→
“Edit
Category”
1. Select the desired category name.
2. Modify the name.
Phone Help
You can view the help list and use it to guide you in the
phone’s functions.
“Organiser & Tools”
→
“Phone Help”
1. Press a or b.
(M 7-9-3)
(M 7-10)
106 SIM Application
SIM Application
You can refer to the information on the SIM. Contact
your service provider for further details.
(M 10)
Settings 107
Settings
The settings contain the following four tabs.
You can select the desired tab with the c/d key, and
after that select the item you wish to customise in the
selected tab with the a/b key.
• Tab 1: “Phone Settings”
• Tab 2: “Connectivity”
• Tab 3: “Call Settings”
• Tab 4: “Network Settings”
Phone Settings
Profiles
The ringtone, sound, vibration and light settings can be
customised for each profile according to your
environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”,
“Car”, “Headset” and “Silent”.
Activating a Profile
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Select the desired profile.
Note
• When a profile is set, the corresponding indicator
described on page 16 is displayed in standby.
Tip
• In standby, press and hold R to switch Profiles
between Silent mode and the profile most recently
activated.
(M 12) (Tab 1)
(M 12-1)
108 Settings
Resetting Profile Settings
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Changing the
Handset Code” on page 119.
Volume
You can adjust the volume for incoming voice calls,
SMS/MMS/Email messages and other sounds
(“General Volume”) to one of six levels, or set an
increasing volume for all of these except “General
Volume”.
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
4. Select “For Incoming Call”, “For New Message” or
“General Volume”.
5. Press a (or d) to increase the ringer volume or
press b (or c) to decrease the ringer volume and
then press .
To select “Increasing Volume”, press a (or d) at
level 5.
To select “Silent”, press b (or c) at level 1.
Tip
• You can select from two levels or an increasing
volume, when selecting the “Silent” profile.
Settings 109
Assigning a Ringtone
You can select the ringtone from 28 tones including 5
patterns, 13 sound effects and 10 melodies. You can
also select a sound in Saved Sounds as the default
ringtone.
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For Incoming Call”.
5. Select “Assign Tone”.
6. Select “Preset Sounds” or “My Sounds”.
7. Highlight the ringtone you wish to use.
To hear the demo play, press [Options] and select
“Play”.
8. Press [Options] and select “Assign” for “Preset
Sounds” or “Select” for “My Sounds”.
Note
• Even if you delete a ringtone that uses a sound in
Music & Ringtones, the setting remains the same and
the default ringtone sounds. If you delete a ringtone
assigned for the ringtone, the default ringtone is set.
Assigning a Ring Video Clip File
You can select a video clip file in Saved Videos as the
default ring video clip file.
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For Incoming Call”.
5. Select “Assign Video”.
6. Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select
“Play”.
7. Press [Options] and select “Select”.
110 Settings
Message Notification
When receiving messages, your phone will notify you
of their arrival with the ringtone or ring video you
specify.
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For New Message”.
5. Select “Assign Tone” or “Assign Video”.
If “Assign Tone” is selected, select “Preset Sounds”
or “My Sounds”.
6. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video,
see “Assigning a Ringtone” on page 109 or
“Assigning a Ring Video Clip File”.
7. Press [Options] and select “Assign” for “Preset
Sounds” or “Select”.
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration of message notification in
2 digits using the digit keys.
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any keys.
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Keypad Tones”.
5. Highlight the desired tone pattern.
6. Press [Options] and select “Assign”.
Warning Tone
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Warning Tone”.
5. Select “Tone” or “Duration”.
For “Tone”, select “Off”, “Preset Sounds” or “My
Sounds”.
For “Duration”, select the desired time between 0.5
and 2 seconds.
Settings 111
Power On Sound and Off Sound
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Power On Sound” or “Power Off Sound”.
5. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “My
Sounds”.
For “Duration”, enter the desired duration of sound
in 2 digits using the digit keys.
Vibration
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Vibration”.
4. Select “On”, “Link to Sound” or “Off”.
Tip
• When the “Link to Sound” option is selected in step
4, the vibrator synchronises with your selected
melody to pulse in time with the melody. Please note
that not all melodies support the “Link to Sound”
option.
• When you select “On” or “Link to Sound” in step 4,
“ ” is displayed in standby.
Any Key Answer
You can answer a call by pressing any key except F
and [Busy]. For details, see page 20.
“Settings”
→
“Phone Settings”
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
112 Settings
Setting the Display
You can change the settings of the display.
Setting the Wallpaper
For the standby screen, 5 pictures are provided.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used for
wallpapers.
To Set My Pictures
“Settings”
→
“Phone Settings”
→
“Display”
→
“Wallpaper”
1. Select “My Pictures”.
2. Select the desired picture.
3. After displaying the picture, press .
Note
• Some pictures cannot be used because of their
picture and data types.
• If the picture in My Pictures is already set, it is
displayed in step 1. Press [Change] and select the
desired picture.
System Graphics
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used.
To Use Preset Animation/Pattern
“Settings”
→
“Phone Settings”
→
“Display”
→
“System Graphics”
1. Select the desired scene to set the picture to.
2. Select “Preset Animation” when you select “Power
On” or “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when
you select “Incoming Call” or “Alarm” in step 1.
(M 12-2)
Settings 113
To Set My Pictures
“Settings”
→
“Phone Settings”
→
“Display”
→
“System Graphics”
1. Select the desired scene to set the picture to.
2. Select “My Pictures”.
3. Select the desired picture.
4. After displaying the picture, press .
5. Specify the area you wish to display using the
navigation keys.
Note
• Some pictures cannot be used because of their
picture and data types.
• If the picture in My Pictures is already set, it is
displayed in step 2. Press [Change] and select the
desired picture.
Themes
You can easily customise the display by using the
theme files.
The theme files downloaded from WAP site can be
used.
“Settings”
→
“Phone Settings”
→
“Display”
→
“Themes”
1. Select “Preset Themes” or “My Themes”.
2. Select the desired the theme file.
Tip
• Even after a theme is set, you can set a wallpaper
regardless of the set theme. In this case, the other
items follow the set theme.
Note
• If you set your original image as a wallpaper, the
screen asking you to choose “Current wallpaper” or
“Link to Theme Wallpaper” is displayed after step 2.
Setting the Font Weight
“Settings”
→
“Phone Settings”
→
“Display”
→
“Font Settings”
1. Select “Thin”, “Normal”, “Bold” or “Bolder”.
The preview image is displayed in the selected
weight.
114 Settings
Setting the Greeting Message
You can set the message which is displayed when the
phone is turned on.
“Settings”
→
“Phone Settings”
→
“Display”
→
“Greeting Message”
→
“Switch On/Off”
1. Select “On” or “Off”.
2. Select “Edit Message” and enter the message (up to
10 characters).
Setting the External Display
To Turn On/Off the External Display
You can turn the external display on or off when the
phone is closed.
“Settings”
→
“Phone Settings”
→
“Display”
→
“External Display”
→
“Switch On/Off”
1. Select “On” to turn external display on or “Off” to
turn external display off.
To Select the Backlight Time Out
“Settings”
→
“Phone Settings”
→
“Display”
→
“External Display”
→
“Backlight”
1. Select the desired time out.
Select “Off” to shut the backlight off.
To Adjust the LCD Contrast
You can adjust the LCD contrast to suit certain lighting
conditions.
“Settings”
→
“Phone Settings”
→
“Display”
→
“External Display”
→
“LCD Contrast”
1. Press a (Dark) or b (Light) to switch between 9
levels of clarity.
2. Press .
To Set Incoming Indication
Caller number or registered caller name can be
displayed on the external display when receiving an
incoming call.
“Settings”
→
“Phone Settings”
→
“Display”
→
“External Display”
→
“Caller Display”
1. Select “On” or “Off”.
Backlight
The backlight will shut off if you do not press the
keypad for a certain length of time. You can specify a
desired time to elapse before the backlight shuts off,
which will help conserve battery life.
Tip
• When you purchase this phone, Backlight is set to 15
seconds.
Settings 115
To Select the Backlight Time Out
“Settings”
→
“Phone Settings”
→
“Display”
→
“Backlight”
→
“Time Out”
1. Select the desired time.
Select “Off” to shut it off.
To Adjust the Brightness of the Backlight
“Settings”
→
“Phone Settings”
→
“Display”
→
“Backlight”
→
“Brightness”
1. Press a (Light) and b (Dark) to switch between 4
levels of clarity.
2. Press .
Setting the Display Saving
The screen of this phone will automatically turn off
after a given amount of time. You can change the length
of time before the Display Saving goes into effect,
which will help conserve battery life.
“Settings”
→
“Phone Settings”
→
“Display”
→
“Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is
set to 2 minutes.
Note
• Display Saving does not work while you are making
a call, using WAP, or using an application.
• To cancel the Display Saving: The display saving
continues until either a key is pressed or there is an
incoming alert. The first key press only cancels this
function. You must press another key in order to enter
any numerical or text value.
116 Settings
Sound & Alerts
You can use this menu to check or edit the current
Profiles settings (except “Any Key Answer”).
Date & Time
You need to set the correct time and date in order for
your phone’s various time-based functions to work
correctly.
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Set Date/Time”
1. Enter the day, month, year and time and year using
the digit keys.
Tip
• When you enter the time in the 12-hour format, press
a or b to switch between am and pm. The order in
which the date and time is displayed is based on the
format setting.
Setting the Daylight Saving
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Daylight Saving”
1. Select “On” or “Off”.
Setting the Time Zone
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Set Time Zone”
1. Press c or d to select the home city to set.
2. Press .
Customising the Time Zone
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Set Time Zone”
→
[Options]
→
“Set Custom Zone”
1. Enter the city name.
2. Enter the time-zone differences using the digit keys.
Press a or b to switch between − and +.
3. Press .
Display Date & Time
You can display the calendar or the current date and/or
time in standby.
To Display the Clock on the Main Display
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Display Date & Time”
→
“Show Main Clock”
1. Select the desired clock type or “Off” to set clock
display off.
(M 12-3)
(M 12-4)
Settings 117
To Display the Clock on the External Display
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Display Date & Time”
→
“Show External Clock”
1. Select the desired clock type.
To Set the Calendar Display
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Display Date & Time”
→
“Show Calendar”
1. Select the desired calendar type or “Off” to set
calendar display off.
World Clock
For details, see page 103.
Selecting the Time Format
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Time Format”
1. Select “24 Hour” or “12 Hour”.
Selecting the Date Format
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Date Format”
1. Select from “D.M.Y”, “M-D-Y” or “Y/M/D”.
Setting the Calendar Format
“Settings”
→
“Phone Settings”
→
“Date & Time”
→
“Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
Language Setting
You can change the language displayed on the phone.
“Settings”
→
“Phone Settings”
→
“Language”
1. Select the desired language.
Tip
• You can also change the input language on the text
entry screen (p. 25).
Note
• If you select “Automatic” in step 1, the language
preset on the SIM card is selected.
• If the language preset on the SIM card is not
supported, then the default language of the phone is
selected.
(M 12-5)
118 Settings
Locks
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the
PIN code each time the phone is switched on. Your PIN
code is registered on the SIM card and you should have
been made aware of the code when you purchased the
SIM card. Contact your service provider for further
details.
“Settings”
→
“Phone Settings”
→
“Locks”
→
“PIN
Entry”
→
“Switch On/Off”
1. Select “On” to enable the PIN code or “Off” to
disable.
2. Enter your PIN code.
Note
• If you enter the wrong PIN code three times in step 2,
the SIM card will lock. To remove the lock, contact
your service provider/SIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on
the SIM card. Before you change the PIN code, select
“On” in step 1 in “Enabling/Disabling the PIN Code”.
“Settings”
→
“Phone Settings”
→
“Locks”
→
“PIN
Entry”
→
“Change PIN”
1. Enter the existing PIN code.
2. Enter a new PIN code.
3. Enter the new PIN code again.
Changing the PIN2 Code
The PIN2 code is used to protect certain functions in the
phone such as Fixed Dialling Number. and call cost
limits. The following shows you how to change the
PIN2 code.
“Settings”
→
“Phone Settings”
→
“Locks”
→
“Change PIN2”
1. Enter the existing PIN2 code.
2. Enter a new PIN2 code.
3. Enter the new PIN2 code again.
(M 12-6)
Settings 119
Handset Lock
The Handset Lock is an additional security feature
which prevents unauthorised use of the phone or certain
features.
“Settings”
→
“Phone Settings”
→
“Locks”
→
“Handset Lock”
1. Select “On” or “Off”.
2. Enter your handset code.
Function Lock
By setting this option on, all the functions of your
phone will be locked until the correct handset code is
entered.
“Settings”
→
“Phone Settings”
→
“Locks”
→
“Function Lock”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Changing the
Handset Code”.
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function
Lock off.
Contacts Lock
The Contacts Lock function prevents unauthorised use
of your Contacts List.
“Settings”
→
“Phone Settings”
→
“Locks”
→
“Contacts Lock”
1. Select “On” to lock or “Off” to unlock.
2. Enter your handset code.
Showing Secret Data
By setting this option on, the hidden data can be
displayed.
“Settings”
→
“Phone Settings”
→
“Locks”
→
“Show
Secret Data”
1. Select “On” to display or “Off” to hide.
2. Enter your handset code when you select “On”.
Changing the Handset Code
The default handset code is “9999”.
“Settings”
→
“Phone Settings”
→
“Locks”
→
“Change Handset Code”
1. Enter the old handset code.
2. Enter a new handset code.
3. Enter the new handset code again.
120 Settings
Master Reset
Resetting Settings from M1 to M12
“Settings”
→
“Phone Settings”
→
“Master Reset”
→
“Reset Settings”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Changing the
Handset Code”.
Note
• Data stored in Contacts List, etc. is not deleted.
Resetting All Settings from M1 to M12 and All
Created Data
“Settings”
→
“Phone Settings”
→
“Master Reset”
→
“Reset All”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code”.
Connectivity
Bluetooth
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology enabled
phones via this connection, as well as a PC via
Bluetooth wireless technology.
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres from the devices
before searching.
Using the Bluetooth Wireless Function
To Turn On or Off
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Switch On/Off”
1. Select “On” or “Off”.
The Bluetooth wireless setting is activated, “On” is
selected and “ ” is displayed.
(M 12-7) (Tab 2)
(M 12-1)
Settings 121
To Show or Hide Your Phone
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Visibility”
1. Select the desired visibility settings.
“Show My Phone”: Allows other devices to
recognise your phone.
“Hide My Phone”: Hides your phone from
other devices.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• If the Bluetooth wireless function is off before
searching, the phone turns the Bluetooth wireless
function on automatically and starts searching.
• You can only select one device for pairing. To change
the paired device, see “To Activate the Paired
Device” on page 121.
Tip
• You can save battery power by turning the Bluetooth
wireless function off while it is not in use. Turn the
Bluetooth wireless function off in “To Turn On or
Off” or in “To Turn Off Automatically” on page 123.
• During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select “Transfer
Audio” and then “To Bluetooth” or “To Handset”.
To Activate the Paired Device
Paired devices are listed by tabs for all devices and for
handsfree devices.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
122 Settings
To Rename or Delete the Paired Devices
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press c or d to switch between all devices and
handsfree devices.
2. Highlight the desired device.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing after
selecting desired device.
To Send All Data to Other Devices
You can send all the data for applications such as
Contacts List, Calendar, Tasks, etc. to selected devices.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Send All”
1. Select the desired device.
If a device is not specified, searching starts
automatically.
2. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Changing the
Handset Code” on page 119.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
• If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is
displayed. Press [Yes] to deactivate.
Settings 123
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent
other phones from recognising your phone, turn the
Bluetooth wireless function off automatically to save
battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in
other devices when your phone is detected.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Device Name”
1. Enter the new device name.
To Turn Off Automatically
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically
after the specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the
phone.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Handsfree Setting”
1. Select “Private mode” or “Handsfree mode”.
“Private mode”: For talking with the phone
“Handsfree mode”: For talking with the handsfree
kit
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX
data to authenticate the passcode (exchanging the
passcode) before pairing devices.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Authentication”
1. Select “On” or “Off”.
Note
• No authentication is required for the paired devices.
• Even if you select “Off”, you may authenticate the
passcode when the sender requests it.
124 Settings
To See Your Phone Details
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“My Phone Details”
Memory Card
Making and Restoring a Backup File
With a memory card inserted in your phone, you can
make backup files of Bookmarks, Text, Contacts,
Calendar and Tasks in the handset memory card to the
memory card. You can also restore the backup data
from the memory card.
To Make a Backup File
“Settings”
→
“Connectivity”
→
“Memory Card”
→
“Backup/Restore”
→
“Backup”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Changing the
Handset Code” on page 119.
2. Select the desired item to backup or “Select All” to
backup all files.
To Restoring a Backup File
“Settings”
→
“Connectivity”
→
“Memory Card”
→
“Backup/Restore”
→
“Restore”
1. Enter your handset code.
2. Select the desired item to restore or “Select All” to
restore all files.
3. Select the desired file to restore.
A confirmation message indicating deletion from
the handset memory is displayed.
4. Press [Yes].
Note
• To delete a backup file, highlight the desired item,
press [Options] and select “Delete” after performing
steps 1 to 3.
Formatting Memory Card
“Settings”
→
“Connectivity”
→
“Memory Card”
→
“Format Card”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Changing the
Handset Code” on page 119.
2. Press [Yes] to start formatting.
(M 12-2)
Settings 125
Call Settings
Voicemail & Diverts
This service can be used to divert incoming calls that
you cannot answer. Calls can be diverted to another
phone number or to your Voicemail system.
Note
• This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
To Set the Voicemail Numbers
You can divert calls to the network Voicemail service
centre. Depending on whether you are inside or outside
your network area, you can set two Voicemail numbers,
a number for your home network area or for a roaming
network area.
Note
• This service depends on the SIM card. Contact your
SIM card vendor for more information.
“Settings”
→
“Call Settings”
→
“Voicemail &
Diverts”
→
“Voicemail”
→
“Settings”
→
“Voicemail
Numbers”
1. Select “Home Mailbox No.” or “Roam Mailbox
No.”.
2. Enter the desired phone number.
To Access the Voicemail Centre
1. Press and hold G in standby.
To Activate the Voicemail Service
“Settings”
→
“Call Settings”
→
“Voicemail &
Diverts”
→
“Voicemail”
→
“Activate”
1. Select one of the following options:
“Always”: Diverts all calls without
ringing.
“When Busy”: Diverts incoming calls while
you are talking on the phone.
“No Answer”: Diverts incoming calls if you
do not answer a call within a
certain period of time.
(Tab 3)
(M 12-1)
126 Settings
“Not Reachable”: Diverts incoming calls when
your phone has no network
service or is switched off.
If you select “No Answer”, select the period of time
from 6 levels (05 to 30 seconds).
2. Press .
To Activate the Diverts Service
Select the appropriate option.
“Settings”
→
“Call Settings”
→
“Voicemail &
Diverts”
→
“Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further
divert options.
2. Select from “Always”, “When Busy”, “No Answer”
or “Not Reachable”.
If you select “No Answer”, select the period of time
from 6 levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert
calls or search for it in the Contacts List (p. 30).
4. Press .
Note
• When “Voice Calls” diverts are set to “Always”,
“ ” is displayed in standby.
To Check the Diverts Status
“Settings”
→
“Call Settings”
→
“Voicemail &
Diverts”
→
“Status”
1. Select the diverts option you wish to check.
To Deactivate the Diverts/Voicemail Service
“Settings”
→
“Call Settings”
→
“Voicemail &
Diverts”
→
“Deactivate”
1. Select the desired option.
To Cancel the Diverts and Voicemail Service
Once you have changed the diverts settings, you can
cancel them all with this service.
“Settings”
→
“Call Settings”
→
“Voicemail &
Diverts”
→
“Cancel All”
Showing My Phone Number
This lets you control whether to show your phone
number when calling another party or not.
“Settings”
→
“Call Settings”
→
“Show My Number”
1. Select “On”, “Off” or “Status”.
Note
• Some networks do not support this service. Please
check with your service provider for availability.
(M 12-2)
Settings 127
Time & Cost
Displaying Call Costs
“Settings”
→
“Call Settings”
→
“Time & Cost”
→
“Display Call Cost”
1. Select “On” or “Off”.
Displaying Call Time Counter
“Settings”
→
“Call Settings”
→
“Time & Cost”
→
“Call Time Counter”
1. Select “On” or “Off”.
Restrict Calls
This function lets you place restrictions on incoming
and outgoing calls. To activate this option you will need
the specified password, which is available from your
service provider.
“Settings”
→
“Call Settings”
→
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”: Restricts outgoing calls.
“Incoming Calls”: Restricts incoming calls.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”:Restricts all outgoing
calls except emergency
calls.
“Bar International Calls”:Restricts all outgoing
international calls.
“Only Local & Home”:Restricts all outgoing
international calls except to
your home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”:Restricts all incoming
calls.
“Bar if Abroad”: Restricts all incoming calls
when you are outside of the
coverage from your
registered service provider.
3. Select one of the following options:
“All Services”: Restricts all services.
“Voice Calls”: Restricts all voice calls.
“Data”: Restricts all date calls.
“Fax”: Restricts all fax calls.
“Message”: Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
(M 12-3)
(M 12-4)
128 Settings
To Cancel Settings
“Settings”
→
“Call Settings”
→
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Rejecting an Incoming Call
You can register phone numbers you do not wish to
answer.
To Reject the Registered Number
“Settings”
→
“Call Settings”
→
“Restrict Calls”
→
“Rejected Numbers”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings”
→
“Call Settings”
→
“Restrict Calls”
→
“Rejected Numbers”
→
“Set Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Withheld Call
“Settings”
→
“Call Settings”
→
“Restrict Calls”
→
“Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings”
→
“Call Settings”
→
“Restrict Calls”
→
“Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to
enter the password again.
4. Press .
Settings 129
Fixed Dialling Number
When the Fixed Dialling Number is enabled, you can
only call pre-registered numbers.
To Enable Fixed Dialling Number
“Settings”
→
“Call Settings”
→
“Restrict Calls”
→
“Fixed Dialling Number”
→
“Switch On/Off”
1. Select “On” to enable this function.
To Add a New Name
“Settings”
→
“Call Settings”
→
“Restrict Calls”
→
“Fixed Dialling Number”
→
“Edit Dial List”
1. Highlight the blank entry, press [Options], then
select “Add New Dial”.
2. Enter y our PIN2 code.
3. Add a name and a phone number.
For details on adding a name and a phone number,
see “Add New Contact” on page 29.
4. Press [Save].
Minute Minder
Minute Minder function informs you of your talk time
by sounding a tone after every minute.
“Settings”
→
“Call Settings”
→
“Minute Minder”
1. Select “On” or “Off”.
Call Waiting
Note
• This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
If you wish to be able to receive another incoming call
while you have a call in progress, you must activate the
Call Waiting service.
“Settings”
→
“Call Settings”
→
“Call Waiting”
1. Select “On”, “Off” or “Status”.
Auto Redial
“Settings”
→
“Call Settings”
→
“Auto Redial”
1. Select “On” or “Off”.
(M 12-5)
(M 12-6)
(M 12-7)
130 Settings
Network Settings
Selecting a Network
Selecting a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
“Settings”
→
“Network Settings”
→
“Select
Network”
→
“Automatic”
Setting the Network Manually
“Settings”
→
“Network Settings”
→
“Select
Network”
→
“Manual”
1. Select the desired network.
Adding a New Network
“Settings”
→
“Network Settings”
→
“Select
Network”
→
“Add New Network”
If there are no entries, press and go to step 2.
If there is an entry, press and perform the following
steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Select “Select network type”.
6. Select the desired network.
Editing the Preferred List
“Settings”
→
“Network Settings”
→
“Select
Network”
→
“Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position,
“Add to end” to insert at the end or “Delete” to
delete.
(Tab 4)
(M 12-1)
Settings 131
Flight Mode
When the Flight Mode is set to “On”, the phone cuts off
the network connections and stops searching for
available networks to connect. With this mode, you can
play games or music even when you fly.
“Settings”
→
“Network Settings”
→
“Flight Mode”
1. Select “On” or “Off”.
Internet Settings
Note
• In normal operations, you do not need to change the
settings.
• Internet settings have already been entered in your
phone depending on your service provider. You may
have restrictions on viewing, deleting, copying or
modifying the settings. Contact your service provider
for details.
WAP Settings
“Settings”
→
“Network Settings”
→
“Internet
Settings”
→
“WAP Settings”
→
“Create New”
“Profile Name”: WAP profile name (Unique
name)
“Proxy”: Proxy setting for WAP
(When “Use Proxy” is On)
“Access Point”: Access point for WAP
(When “Use Proxy” is Off)
“Use Proxy”: Setting to connect by Proxy
or not
“Home”: Home page URL (When
“Use Proxy” is Off)
(M 12-2)
(M 12-3)
132 Settings
Proxy Settings
“Settings”
→
“Network Settings”
→
“Internet
Settings”
→
“Proxy Settings”
→
“Create New”
“Proxy Name”: Proxy name (Unique name)
“Proxy Address”: IP address
“Access Point”: Access point
“Home”: Home page URL
“Port Number”: Port number (1-65535)
“Authentication Type”: Authentication Type
(“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”: User name for
authentication
“Password”: Password for authentication
Access Point Settings
“Settings”
→
“Network Settings”
→
“Internet
Settings”
→
“Access Point Settings”
→
“Create New”
“Access Point Name”: Access point name (Unique
name)
“APN”: APN setting
“Authentication Type”: Authentication type
(“NONE”, “PAP” or
“CHAP”)
“User Name”: User name for access point
“Password”: Password for access point
“DNS”: DNS (Domain Name
System)
“Linger Time”: Linger Time (1-99999 sec.)
Re-provisioning Settings
“Settings”
→
“Network Settings”
→
“Internet
Settings”
→
“Re-provisioning Settings”
→
“Execute
Pending”
Clearing DNS Cache
“Settings”
→
“Network Settings”
→
“Internet
Settings”
→
“Clear DNS Cache”
Settings 133
White List
“Settings”
→
“Network Settings”
→
“Internet
Settings”
→
“White List”
→
“Create New”
“SMSC Address”: SMSC address
“SM Orig. Address”: SM originating address
To Activate the WAP Profile
“Settings”
→
“Network Settings”
→
“Internet
Settings”
1. Select “WAP Settings”.
2. Select the desired profile you wish to activate.
To Edit/Copy/Delete the WAP Profile
“Settings”
→
“Network Settings”
→
“Internet
Settings”
1. Select “WAP Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”: Modify the desired item
“Copy”: Enter the new file name
“Delete”: Press [Yes] to delete
Cell Broadcasts
You can receive cell broadcast messages or general
messages such as weather forecasts and traffic reports.
This information is broadcast to subscribers in certain
network areas.
This function may not be available on all mobile phone
networks. Contact your service provider for more
information.
To Enable/Disable Cell Broadcasts
“Settings”
→
“Network Settings”
→
“Cell
Broadcasts”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Read Cell Broadcast Messages
“Settings”
→
“Network Settings”
→
“Cell
Broadcasts”
→
“Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press [Back].
(M 12-4)
134 Settings
To Set Languages for Cell Broadcast Messages
“Settings”
→
“Network Settings”
→
“Cell
Broadcasts”
→
“Settings”
→
“Language”
The current language is displayed.
1. Press to check.
2. Press [Save].
To Subscribe to Cell Broadcasts
Select the page of the cell broadcast message that you
want.
“Settings”
→
“Network Settings”
→
“Cell
Broadcasts”
→
“Settings”
→
“Set Info Subjects”
→
[Options]
1. Select “Add/Remove”.
2. Select the desired page.
3. Press [Back].
Tip
• If the desired page is not in the list that appears in
step 2, select “Create Subject” in step 1, then enter
the subject code to add a page. For details on the
subject code, contact your service provider.
Area Info
The Area Info is the message information that operators
send to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in standby.
To Enable/Disable Area Info
“Settings”
→
“Network Settings”
→
“Area Info”
1. Select “On” or “Off”.
Note
• This function may not be available on all mobile
phone networks. Contact your service provider for
more information.
• If Area Info is set to “On”, the standby time will
decrease.
Showing the Network Information
“Settings”
→
“Network Settings”
→
“Network
Information”
Information about the operator name, package and
services are displayed.
(M 12-5)
(M 12-6)
Call Log 135
Call Log
The phone will record the last 30 missed calls, received
calls and dialled numbers.
Viewing Call Log
“Call Log”
1. Select from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D.
Tip
• You can also confirm call logs by pressing D in
standby.
Sending Messages
1. In the call log list, highlight the phone number or
name you wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a
New Message” on page 44.
Deleting a Call Log
1. In the call log list, press [Options] and select
“Delete” or “Delete All”.
(M 9)
136 Call Log
Call Timers
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All
Calls
“Call Log”
→
“Call Timers”
1. Select “Received Calls” or “Dialled Calls”.
Resetting Call Timers
“Call Log”
→
“Call Timers”
→
“Clear Timers”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Changing the
Handset Code” on page 119.
Data Counter
You can confirm the number of bytes used in the GSM
transmission.
“Call Log”
→
“Data Counter”
1. Select from “Last Data” or “All Data”.
Resetting All Data Counter
“Call Log”
→
“Data Counter”
→
“Clear Counter”
Call Costs
This function lets you check the charges for your calls.
Some networks do not support Charging Advice. Please
check with your service provider for availability.
Checking the Cost of the Last Call
“Call Log”
→
“Call Costs”
→
“Last Call”
Checking the Total Call Cost
“Call Log”
→
“Call Costs”
→
“All Calls”
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
“Call Log”
→
“Call Costs”
→
“Cost Units”
→
“Set
Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
(M 9-5)
(M 9-5-3)
(M 9-6)
(M 9-6-3)
(M 9-7)
(M 9-7-1)
(M 9-7-2)
(M 9-7-5)
Call Log 137
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
“Call Log”
→
“Call Costs”
→
“Max Cost”
→
“Set
Limit”
1. Enter your PIN2 code.
2. Enter a value.
Checking the Residual Credit
“Call Log”
→
“Call Costs”
→
“Residual Credit”
Resetting All Call Costs
“Call Log”
→
“Call Costs”
→
“Clear Costs”
1. Enter your PIN2 code.
(M 9-7-6)
(M 9-7-3)
(M 9-7-4)
138 Connecting GX40 to Your PC
Connecting GX40 to Your PC
You can use the following functions by connecting the
GX40 to your PC using a USB port* or Bluetooth
wireless technology port:
•GSM modem
• Handset Manager for GX40
• Music Manager for GX40
• Sync Manager for GX40
* Requires an optional USB data cable XN-1DC30 for
USB port connection.
System Requirements
Operating System:
Windows 98*, Windows Me, Windows
2000**, Windows XP***
*Windows
98 Second Edition
** Service Pack 4 or later
*** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
USB port or Bluetooth wireless port
CD-ROM drive
To use Music Manager, DirectX9 and Windows Media
Player 9 or later are required.
GSM/GPRS Modem
You can use GX40 as a GSM/GPRS modem to access
the Internet from your PC. Connect your phone to your
PC via Bluetooth wireless technology or USB interface.
Software installation on your PC is required. For
details, see “Software Installation” on page 142.
Modem via the USB Cable
To use the modem function using a USB cable, use the
cable mentioned above and see the instructions
accompanying the cable.
Connecting GX40 to Your PC 139
Modem via Bluetooth connection
To use the modem function via Bluetooth wireless
technology interface, see “Using the Bluetooth
Wireless Function” on page 120 and turn the modem
function on.
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Note
• Modem communication is not possible while
communicating with the Handset Manager via
Bluetooth wireless technology, USB interface.
• Your phone exhausts the battery when connected to a
PC, even when not communicating.
Handset Manager
You can transmit the following items between your
phone and your PC, and can use Contacts List entries on
your PC:
• My Items files (pictures/sounds/video clips/Other
Documents data)
• Contacts List entries
• Schedule entries
To use the Handset Manager function, see “Connecting
GX40 to Your PC” on page 138 and set your phone to
standby.
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Music Manager
You can exchange the playlist and the sound files
between your phone and your PC, and can manage
them on your PC.Available files are the sound files in
the following formats: MP3, AAC, REAL AUDIO,
3GPP.
140 Connecting GX40 to Your PC
<Main Control Panel>
Control all the main actions from here.
Previous File: Returns to the top portion of the
current file.
Play: Playing back a file.
Next File: Jumps to the next file.
Browse: Browse all the media files sorted
in Genre/Artist/Album.
Search: Search media files.
Input Window: Quickly find the media files in
Library or the playlist with
keyword entry.
<Media Management in PC>
Media files in PC can be easily explored in 2 main
columns.
Add Playlist: Creating new playlist.
Add Smart Playlist: Creating new smart playlist.
Remove Playlist: Removing playlist.
<Media Management in Handset>
Media files in Handset can be easily explored in 2
main columns.
Previous File
Browse
Sarch
Input Window
Media Management
in PC
Media Management
in Handset
Play
Next File
Add Playlist
Add Smart Playlist
Remove Playlist
Main Control Panel
Connecting GX40 to Your PC 141
• With the drag and drop operation, you can upload the
sound files and the playlists from your PC, and also
download them to your PC.
• With the drag and drop operation, you can change the
order of tracks.
• You can create a new playlist and delete an existing
playlist.
• With the drag and drop operation, you can add a
sound file to a playlist, and delete them from the
playlist.
• You can edit the name of a playlist.
• You can edit the title, artist name, and album name of
sound files. (only available in MP3 format)
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Sync Manager
You can synchronise the following data with the data of
Microsoft Outlook or Outlook Express on your PC.
• Contacts List entries.
• Schedule entries.
Tip
• You can set up Sync Manager to start up and
synchronise automatically after you connect your
phone with your PC.
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
142 Connecting GX40 to Your PC
Software Installation
1. Insert the supplied CD-ROM into your CD-ROM
drive.
The GX40 CD-ROM screen is displayed.
If the GX40 CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Press the desired button.
3. Follow the on-screen instructions to complete
installation.
Note
• The phone may not recognise the USB data cable if it
is connected while an application (Camera, My
Items, etc.) is running. Connect the USB data cable in
standby.
GSM modem
• It is not recommended that you make or answer calls
when you are using GX40 as a GSM modem. The
operation may be interrupted.
Handset Manager, Music Manager, Sync Manager
• It is not recommended that you answer calls when
you are using GX40 with Handset Manager/Music
Manager/Sync Manager.
• Some large files may not be able to be transmitted
from the PC to the phone.
• Applications (Camera, My Items, etc.) do not run
when the phone is connected to the PC via Bluetooth
wireless technology interface, USB data cable.
• Data under copyright protection may not be sent
successfully.
Troubleshooting 143
Troubleshooting
Problem Solution
The phone does not
turn on.
• Make sure the battery is
properly inserted and
charged.
PIN code or PIN2
code is rejected.
• Make sure you have entered
the correct code (4 to 8
digits).
• Your SIM card/protected
functions will become locked
after three unsuccessful
attempts.
• Contact your SIM provider if
you do not have the correct
PIN code.
The SIM card
becomes locked.
• Enter the PUK code (8 digits)
provided by your service
provider (if supported).
• If the attempt is successful,
enter the new PIN code and
confirm your phone is
operational again. Otherwise
contact your dealer.
The display is
difficult to read.
• Adjust the backlight
brightness for the display.
Phone functions do
not work after the
phone is turned on.
• Check the radio signal
strength indicator as you may
be outside the service area.
• Check to see if any error
message is displayed when
you turn your phone on. If so,
contact your dealer.
• Make sure the SIM card is
correctly inserted.
Call quality is poor.
• Your current location may not
provide good call quality (i.e.,
in a car or train). Move to a
location where radio signal
strength is greater.
Cannot send or
receive text
message.
• Make sure you are correctly
subscribed for the Short
Message Service, that the
network supports this service,
and that the centre number is
set up correctly. If not, contact
your network service
provider.
Problem Solution
144 Troubleshooting
Calls cannot be
made or received.
• If the message “Insert SIM
card” is displayed when the
phone is switched on, you
cannot use your SIM card or
the SIM card is damaged.
Contact your dealer or
network service provider.
• Check your call barring, fixed
dialling setting, remaining
battery and call forwarding
settings.
• Check if your phone is
currently performing data
communication using
Bluetooth wireless
technology interface or a USB
data cable.
• Check the remaining balance
if you are using a pre-paid
SIM card.
Cannot access
network service.
• Check where your account
has been registered and
where the service is
available.
Limited memory
available.
• Delete any unnecessary data.
Problem Solution
Cannot connect to
Multimedia
Messaging Service
provider.
• MMS settings and
configuration may be missing
or incorrect or the network
does not support it. Check
your service provider’s
access point number.
Contact your service provider
to confirm the correct
settings.
Call is terminated
unexpectedly.
• Magnetised objects such as
health necklaces placed near
the phone may terminate the
call. Keep your phone away
from such objects.
No entries are
displayed in the
Contacts List.
• Confirm that the Contacts
Location setting (Handset or
SIM) is correct.
Fax transmission
failure.
• Before transmitting fax data,
configure your fax software to
use the software flow control.
• Use of the optional data cable
is recommended for
transmitting fax data.
Cannot receive
OBEX data.
• The OBEX data can only be
received only in standby.
Problem Solution
Safety Precautions and Conditions of Use 145
Safety Precautions and
Conditions of Use
Your phone conforms to international regulations
insofar as it is used under normal conditions and in
accordance with the following instructions.
CONDITIONS OF USE
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as
your phone may interfere with the aircraft’s
electronic systems). Current legislation forbids this
use and legal action can be taken against the user.
• Do not switch on your phone in a hospital, except in
designated areas.
• For body worn operation, this phone has been tested
and meets RF exposure guidelines when used with an
accessory that contains no metal and that positions
the handset a minimum of 15mm from the body. Use
of other accessories may not ensure compliance with
RF exposure guidelines.
• Use of your phone’s function may affect the
performance of medical electronic units
(pacemakers, hearing aids, insulin pumps, etc.).
When the phone function is on, do not bring it near
medical equipment or into areas in which medical
equipment is being used. If you have a hearing aid or
a pacemaker, only use the phone on the opposite side
of your body from where it is located. The phone
should be kept at least 6 inches (15.24 cm) from a
pacemaker ANYTIME the phone is switched on.
• Do not switch on your phone near gas or flammable
substances.
• Observe the rules concerning the use of mobile
phones at gasoline stations, chemical plants and at all
sites where a risk of explosion exists.
146 Safety Precautions and Conditions of Use
Caring for your phone
• Do not allow children to use your phone without
supervision.
• Do not open or attempt to repair your phone yourself.
The product can only be repaired by authorised
service personnel.
• Do not drop your phone or subject it to severe
impacts. Bending the body and pushing the display or
keys with extreme force could damage the phone.
• Do not use solvents to clean your phone. Use only a
soft, dry cloth.
• Do not carry your phone in your back pocket as it
could break when you sit down. The display is made
of glass and is particularly fragile.
• Avoid touching the external connector on the
underside of the phone, since the delicate
components within can be damaged by static
electricity.
Battery
• Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage
caused by the use of other chargers, batteries or
accessories.
•Network configuration and phone usage will
affect talk-time and standby time.
Using the games or camera will hasten battery
consumption.
•When the battery charging alert is displayed on
the screen, charge the battery as soon as possible.
If you continue using your phone ignoring the alert,
the phone may cease to function, and all data and
settings you have stored may be lost at any moment.
• Before removing the battery from the phone, make
sure the phone is switched off.
• Replace and charge the new battery as soon as
possible after removing the old one.
Safety Precautions and Conditions of Use 147
• Do not touch the battery terminals. Batteries can
cause damage, injury or burns if a conductive
material touches exposed terminals. When the battery
is detached from the phone, use a cover made of
non-conductive material for keeping and carrying the
battery safely.
• Recommended temperature for using and storing
batteries is approximately 20°C.
• The batteries’ performance is limited in low
temperatures, particularly below 0°C and the phone
may not work temporarily regardless of the amount
of remaining battery power.
• Exposing the phone to extreme temperatures will
shorten battery life.
• The battery can be charged and discharged hundreds
of times but it will eventually wear out. When the
operating time (talk-time and standby time) is
noticeably shorter than normal, it is time to buy a new
battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 11.
Memory Card
• Do not remove or insert a memory card while data on
the card is being edited. Do not turn off the phone or
device containing the memory card while data on the
card is being edited as this may damage the data or
cause the card to stop functioning correctly.
• Data may be lost under the following circumstances.
-If the phone is dropped, or shook, or force is applied
while the memory card is inserted.
-When the phone is used in areas that are exposed to
static electricity or electric noise.
• Backup your important data in case data on the
memory cards are lost due to malfunctions.
• Do not touch the metal terminals with your hands or
metal objects.
• Do not bend the memory card or subject it to violent
impact. Keep it away from water and high
temperatures.
• SHARP holds no responsibility for the loss or
damage of data contained on a memory card.
• Keep all memory cards out of the reach of small
children.
148 Safety Precautions and Conditions of Use
Aerial Care
• Do not cover the hinge area of the phone (p. 10,
No. 14) with your hand when in use as this may
interfere with the performance of the built-in aerial.
Call quality may deteriorate leading to shortened
talk-time and standby time because the mobile phone
has to operate on a higher power level than is
necessary.
• Use only the aerial supplied or one approved by
Sharp for your mobile phone. Using unauthorised or
modified aerials may damage the mobile phone.
Moreover, since the mobile phone may violate the
appropriate regulations, it may lose performance or
exceed the limitation of SAR levels.
• To avoid impaired performance, do not damage the
aerial of the mobile phone.
• While talking directly to the microphone, please hold
the mobile phone so that the aerial is upwards over
your shoulder.
• To avoid interfering with blasting operations, please
turn off the mobile phone in a blasting area or in a
place where a “turn off two-way radio” sign is
posted.
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking
pictures.
If the phone moves while taking a picture, the picture
can become blurred. When taking a picture, hold the
phone firmly to prevent it from moving, or use the
delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before
taking a picture.
Safety Precautions and Conditions of Use 149
Others
• As with any electronic storage unit, data may be lost
or corrupted under various circumstances.
• Before connecting the phone with a PC or a
peripheral unit, read the operation manual for the
other unit carefully.
• If the phone’s battery has been removed for some
time, or the phone has been reset, the unit’s clock and
calendar may be reinitialised. The date and time
should be updated in this case.
• The phone uses a magnet to recognise that the phone
is closed. Do not place magnetic cards near your
phone or get the card caught in the phone as it may
damage the recorded data.
ENVIRONMENT
• Keep your phone away from extreme heat. Do not
leave it on the dashboard of a car or near a heater. Do
not leave it in any place that is extremely damp or
dusty.
• Since this product is not waterproof, do not use it or
store it where fluids such as water can splash onto it.
Raindrops, water spray, juice, coffee, steam,
perspiration, etc. will also cause malfunctions.
PRECAUTIONS CONCERNING
VEHICLE USE
• It is the user’s responsibility to check the local laws
governing the use of a mobile phone in vehicles. Pay
full attention to driving. Pull off to the side of the
road, park the car, and switch off the engine before
making or answering a call.
• Use of your phone’s function may interfere with the
vehicle’s electronic systems, such as the ABS
anti-lock brakes or the air-bag. To ensure no such
problem occurs, please check with your dealer or car
manufacturer before connecting your phone.
• Only allow qualified service maintenance personnel
to install the vehicle accessories.
The manufacturer disclaims any liability for damage
which may result as a consequence of improper use or
use contrary to the instructions contained herein.
150 Safety Precautions and Conditions of Use
SAR
Your mobile device is a radio transmitter and receiver.
It is designed not to exceed the limits for exposure to
radio waves recommended by international guidelines.
These guidelines were developed by the independent
scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg and the highest SAR value for
this device when tested at the ear was 0.516 W/kg*. As
mobile devices offer a range of functions, they can be
used in other positions, such as on the body as described
in this user guide**. In this case, the highest tested SAR
value is 0.876 W/kg.
As SAR is measured utilizing the devices highest
transmitting power the actual SAR of this device while
operating is typically below that indicated above. This
is due to automatic changes to the power level of the
device to ensure it only uses the minimum level
required to reach the network.
The World Health Organization has stated that present
scientific information does not indicate the need for any
special precautions for the use of mobile devices. They
note that if you want to reduce your exposure then you
can do so by limiting the length of calls or using a
‘hands-free’ device to keep the mobile phone away
from the head and body.
* The tests are carried out in accordance with
international guidelines for testing.
** Please see the CONDITIONS OF USE section on
page 145 about body worn operation.
INFORMATION ON PROPER
DISPOSAL
Attention: Your product is marked with this symbol.
It means that used electrical and
electronic products should not be mixed
with general household waste. There is a
separate collection system for these
products.
Safety Precautions and Conditions of Use 151
A.Information on Disposal for Users (private
households)
1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dust bin!
Used electrical and electronic equipment must be
treated separately and in accordance with legislation
that requires proper treatment, recovery and recycling
of used electrical and electronic equipment.
Following the implementation by member states,
private households within the EU states may return
their used electrical and electronic equipment to
designated collection facilities free of charge*. In some
countries* your local retailer may also take back your
old product free of charge if you purchase a similar new
one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has
batteries or accumulators, please dispose of these
separately beforehand according to local requirements.
By disposing of this product correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your
local authorities and ask for the correct method of
disposal.
For Switzerland: Used electrical or electronic
equipment can be returned free of
charge to the dealer, even if you don’t
purchase a new product. Further
collection facilities are listed on the
homepage of www.swico.ch or
www.sens.ch.
B.Information on Disposal for Business Users.
1. In the European Union
If the product is used for business purposes and you
want to discard it:
Please contact your SHARP dealer who will inform you
about the take-back of the product. You might be
charged for the costs arising from take-back and
recycling. Small products (and small amounts) might
be taken back by your local collection facilities.
For Spain: Please contact the established collection
system or your local authority for take-
back of your used products.
152 Safety Precautions and Conditions of Use
2. In other Countries outside the EU
If you wish to discard of this product, please contact
your local authorities and ask for the correct method of
disposal.
PRECAUTIONS FOR USE IN USA
Changes or modifications not expressly approved by
the manufacturer responsible for compliance could
void the user’s authority to operate the equipment.
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards that
were developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg.* Tests for SAR are conducted using
standard operating positions specified by the FCC with
the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels so
as to use only the power required to reach the network.
In general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the public,
it must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for
use at the ear is 0.675 W/kg and when worn on the body,
as described in this user guide, is 0.683 W/kg.
Body-worn Operation; This device was tested for
typical body-worn operations with the back of the
phone kept 1.5 cm from the body. To maintain
compliance with FCC RF exposure requirements, use
Safety Precautions and Conditions of Use 153
accessories that maintain a 1.5 cm separation distance
between the user’s body and the back of the phone. The
use of belt-clips, holsters and similar accessories should
not contain metallic components in its assembly.
The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure
requirements, and should be avoided. While there may
be differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID APYHRO00042.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA)
web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/
kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
154 Index
Index
A
Alarms 96
Area Info 134
B
Battery 10
Battery Level Indicator 12
Bluetooth Wireless Function 120
C
Calculator 98
Calendar 91
Call Costs 136
Call Log 135
Call Settings 125
Call Timers 136
Camera (digital/video) 37
Adjusting the Exposure 38
Common Shortcut Keys 39
Continuous Shoot 40
Recording Video Clips 37
Selecting the Picture or Video
Quality 38
Selecting the Picture Size 40
Selecting the Recording Time
42
Selecting the Shutter Sound 41
Switching between the Photo
and Video Camera Modes
38
Taking Pictures 37
Cell Broadcasts 133
Characters 24
Changing the Input Mode 25
Using Templates 26
Connectivity 120
Bluetooth 120
Flight Mode 131
Internet Settings 131
Network Settings 130
Contacts List 28
Contact Groups 33
Manage Category 32
Memory Status 33
Selecting the Storage Memory
29
Speed Dial List 34
Synchronising Contacts List
Entries with those on the
Internet 35
Viewing My Contact Details 30
Contacts Lock 119
Countdown Timer 104
D
Data Counter 136
Date & Time 116
E
Earpiece Volume 21
E-Book 100
Emergency Calls 19
Expenses Memo 104
F
FM Radio 68
Auto Scan 68
Entering a Frequency Directly
68
Key functions with the phone
closed 72
Option of Station List 70
Playing FM Radio 68
Selecting from Station List 69
Setting Stations Automatically
69
Setting Stations Manually 69
Station List 69
Function Lock 119
G
Games & Applications 82
Java™ Information 87
Index 155
Setting Permission 83
Switching the Screensaver On or
Off 86
Viewing Application
Information 84
H
Handset Code 119
Handset Lock 119
I
In Call Menu (Voice Call) 21
Accessing SMS/MMS Menu
during a Call 22
Conference Call 22
Muting the Microphone 23
Putting a Call on Hold 21
Turning the Speaker On and Off
21
International Calls 19
Internet Settings 131
K
Keypad Lock 15
L
Language Setting 117
Locks 118
M
Master Reset 120
Memory Card 124
Messaging (SMS/MMS/Email) 43
Calling the Phone Number 48
Downloading 48
Email Settings 58
Forwarding 49
General Settings 56
Locking or Unlocking 49
MMS Settings 58
Sending a Message in the Drafts
Box 47
Sending a Voice Clip Message
or Video Clip Message 47
Sending with Postcard 50
SMS Settings 57
Storing the Phone Number 48
Using the Sending Options 46
Music Player 64
Key functions with the phone
closed 67
Adding a File to the Playlist 66
Adding a New Playlist 64
Playing Back Sound Files 64
Sorting Files 66
My Items 73
N
Navigating Functions 18
Network Settings 130
O
Organiser & Tools 96
Other Documents 76
P
PC Connection 138
Phone Help 105
Pictures 73
PIN Code 118
PIN2 Code 118
Power On and Off 14
Profiles 107
R
Redialling 20
Ringtone 74
S
Safety Precautions 145
Screensavers 86
Secret Data 119
Setting the Display 112
Settings 107
SIM Application 106
SIM Card 10
156 Index
Sound Settings 116
Speed Dialling 20
T
Tasks 101
Text Templates 81
Themes 76, 113
Troubleshooting 143
V
Video 87
Video Clips 75
Vodafone live! 60
Vodafone Messenger 51
1st Login 52
Adding a New Contact Group 53
Adding a New Contact
Members 53
Adding Members to a Contact
Group 53
Entry a Watchers List 55
Messenger Settings 59
Reading a Message 54
Reading a Saved Conversation
54
Saving a Conversation 54
Settings for Client 55
Starting a Conversation 52
Voice Recorder 99
W
WAP Browser 61
World Clock 103
List of Menu Functions 157
List of Menu Functions
Menu No./Main Menu Menu No./Sub Menu1
1Entertainment 1Games & Applications
2Video
2Vodafone live!
1Vodafone live!
2Enter URL
3Bookmarks
4Alert Inbox
5Saved Page
6Access History
7Browser Settings
8What’s New?
9Games
10 Ringtones
11 Pictures
12 News
13 Sport
3Music
1Last Played Music/
Currently Playing
2My Music
3Radio
4Messaging
1Create Message
2Inbox
3Drafts
4Sent
5Outbox
6Instant Messenger
7Vodafone Messenger
8Templates
9Media Album
10 Messaging Settings
11 Memory Status
5Camera
6My Items
1Pictures
2Music & Ringtones
3Games
4Videos
5Applications
6Themes
7Tex t Tem p la tes
8Other Documents
9Memory Status
Menu No./Main Menu Menu No./Sub Menu1
158 List of Menu Functions
* Depends on SIM card contents
7Organiser & Tools
1Alarms
2Calculator
3Voice Recorder
4Stopwatch
5Tasks
6World Clock
7Countdown Timer
8E-Book
9Expenses Memo
10 Phone Help
8Contacts
1Contacts List
2Call Voicemail
3Manage Category
4Speed Dial List
5My Contact Details
6Contact Groups
7Synchronise
8Settings
9Manage Contacts
10 Service Dialling No.*
Menu No./Main Menu Menu No./Sub Menu1
9Call Log
1All Calls
2Dialled Numbers
3Missed Calls
4Received Calls
5Call Timers
6Data Counter
7Call Costs?·For body worn
operation, this phone has
been tested and meets RF
exposure guidelines when
used with an accessory that
contains no metal and that
positions the handset a
minimum of 15mm from the
body. Use of other
accessories may not ensure
compliance with RF
exposure guidelines.?
10 SIM Application
11 Calendar
Menu No./Main Menu Menu No./Sub Menu1
List of Menu Functions 159
Menu No./Main Menu Menu No./Sub Menu1
12 Settings
(Tab 1: Phone Settings)
1Profiles
2Display
3Sounds & Alerts
4Date & Time
5Language
6Locks
7Master Reset
(Tab 2: Connectivity)
1Bluetooth
2Memory Card
(Tab 3: Call Settings)
1Voicemail & Diverts
2Show My Number
3Time & Cost
4Restrict Calls
5Minute Minder
6Call Waiting
7Auto Redial
(Tab 4: Network Settings)
1Select Network
2Flight Mode
3Internet Settings
4Cell Broadcasts
5Area Info
6Network Information
160 List of Menu Functions
Note for the menu indications for the Postcard, Media Album and other services
• The menu indications for the Postcard, Media Album and other services vary in the United Kingdom and Ireland
and South Africa as follows:
Current indications in the user
guide Indications in United Kingdom Indications in Ireland South Africa
“Postcard” “live! Postcard” (Not available) (Not available)
“Additional Information” “Additional information” “Additional Information” “Additional Information”
“Street & Number” “Address” “Street & Number” “Street & Number”
“State/Province” “County” “State/Province” “State/Province”
“Postal Code” “Post Code” “Postal Code” “Postal Code”
“Media Album” “live! Studio” “Picture Album” “live! Studio”
“To Media Album” “To live! Studio” “To Picture Album” “To live! Studio”
“What’s New?” “New” “New” “What’s New?”