Contents
- 1. User Manual
- 2. User Manual logo
User Manual
![](/img.php?id=824512&img=bg1.png)
Declaration of Conformity
Hereby, Sharp Telecommunications of Europe Limited,
declares that this 880SH is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
A copy of the original declaration of conformity can be
found at the following Internet address:
http://www.sharp-mobile.com
Sharp Telecommunications of Europe Ltd.
Azure House, Bagshot Road, Bracknell, Berkshire RG12 7QY UK
http://www.sharp-mobile.com
![](/img.php?id=824512&img=bg2.png)
Introduction 1
Introduction
Congratulations on your new HSDPA 880SH phone.
About This User Guide
This user guide is carefully designed to help you learn
about your phone’s features and operations quickly and
effectively.
NOTICE
• We strongly recommend that you keep separate
permanent written records of all important data. Data
may be lost or altered in virtually any electronic
memory product under certain circumstances.
Therefore, we assume no responsibility for data lost
or otherwise rendered unusable, whether as a result of
improper use, repairs, defects, battery replacement,
use after the specified battery life has expired or any
other cause.
• We assume no responsibility, directly or indirectly,
for financial losses or claims from third parties
resulting from the use of this product and any of its
functions, such as stolen credit card numbers, the loss
or alteration of stored data, etc.
• All company and/or product names are trademarks
and/or registered trademarks of their respective
holders.
• Screen layout may differ from that illustrated in this
user guide.
The information described in this user guide is
subject to change without notice.
• All the functions described in this user guide may not
be supported by all networks.
• We assume no responsibility for downloaded
contents, information, etc. from the network.
• Occasionally, a few black or bright pixels may appear
on the screen. Please note that this will not have any
impact on any of the features or on performance.
Intellectual Property Rights
According to copyright laws, the reproduction,
alteration and use of material which is protected by
copyright (music, pictures, etc.) is only permitted for
personal or private use. If the user is not in possession
of more extensive copyright or has not received the
explicit permission from the copyright owner to
reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation
of the copyright laws and gives the copyright owner the
right to claim for damages. For this reason, avoid the
illegal use of material which is protected by copyright.
Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
![](/img.php?id=824512&img=bg3.png)
2Introduction
Powered by JBlend™ Copyright
1997-2005 Aplix Corporation. All rights
reserved.
JBlend and all JBlend-based trademarks
and logos are trademarks or registered
trademarks of Aplix Corporation in Japan
and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI
Corporation
©2002-2007 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one
or more of the following United States Patents and/or their
domestic or foreign counterparts and other patents
pending, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450: 4,811,420: 5,228,056: 5,420,896: 5,799,010:
5,166,951: 5,179,571 & 5,345,467
T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928, and 6,011,554; Australian Pat. No. 727539;
Canadian Pat. No. 1,331,057; United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842
463 (96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB;
Republic of Korea Pat. Nos. KR201211B1 and
KR226206B1; and additional patents are pending
worldwide.
CP8 PATENT
microSD™ is a trademark of the SD Card Association.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sharp is
under license. Other trademarks and trade names are
those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more
of the following United States Patents and/or their
counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
![](/img.php?id=824512&img=bg4.png)
Introduction 3
This product is licensed under the MPEG-4 Visual Patent
Portfolio License for the personal and non-commercial use of
a consumer to (i) encode video in compliance with the
MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode
MPEG-4 Video that was encoded by a consumer engaged in
a personal and non-commercial activity and/or was obtained
from a licensed video provider. No license is granted or
implied for any other use. Additional information may be
obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent
Portfolio License for encoding in compliance with the
MPEG-4 Systems Standard, except that an additional license
and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media
which is paid for on a title by title basis and/or (ii) data which
is paid for on a title by title basis and is transmitted to an end
user for permanent storage and/or use. Such additional
license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
Useful Functions and Services
Your phone offers you the following features:
• Video calls. You can talk while viewing each other on respective
screens.
• 3D and colour Java™ games. You can also download various games
and applications from Vodafone live!.
• Thin Film Transistor (TFT) colour LCD display with images that are
clearer and easier to view.
• A built-in digital camera with an auto focus function for taking pictures
and video clips.
• A message function for reading and creating SMS messages.
• MMS (Multimedia Messaging Services) for sending picture, sound and
video messages to brighten someone’s day.
• Email for sending up to 300 KB and receiving mail with attachments.
• A colour WAP browser for accessing information on Vodafone live!.
• Your own ringtones and ring video clips. You can use sound or video
clip files as a ringtone or ring video clip.
• A music player that can play back MP3, MPEG-4 and 3GPP format
sound files (supported codec of MPEG-4 or 3GPP are AMR, AAC,
AAC+, and AAC+e).
• Playback of downloaded sound and video clip files.
• A voice recorder function for recording and playing back voice clips.
•A Bluetooth® wireless technology interface for establishing contact
and transmitting data with certain devices. You can transmit pictures,
sounds, and video clips to OBEX-enabled phones.
• A data synchronisation function for updating Contacts List entries on
the Internet.
• A schedule alarm for creating and sending schedule entries with alarm
settings.
• A microSD™ memory card slot that expands connectivity with a PC
using the memory card.
This product contains NetFront Browser and NetFront
Messaging Client of ACCESS CO.,LTD.
ACCESS and NetFront are trademarks or registered trademarks
of ACCESS CO., LTD. in Japan and other countries.
NetFront Browser © Copyright 1996-2007 ACCESS CO., LTD.
NetFront Messaging Client © Copyright 2000-2007
ACCESS CO., LTD.
This software is based in part on the work of the
Independent JPEG Group.
![](/img.php?id=824512&img=bg5.png)
4 SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
Your phone conforms to international regulations in so
far as it is used under normal conditions and in
accordance with the following instructions.
Sharp and Vodafone disclaim any liability for damage
which may result as a consequence of improper use or
use contrary to the instructions contained herein.
Read the safety information sections of this user
guide on pages 4 to 15.
Do not use hand-held while driving.
For body-worn operation, maintain a separation of
1.5 cm.
Small parts may cause a choking hazard.
This device may produce a loud sound.
Keep away from pacemakers and other personal
medical devices.
Switch off when instructed in hospitals and medical
facilities.
Switch off when instructed in aircrafts and airports.
Switch off in explosive environments.
Do not use while re-fuelling.
This device may produce a bright or flashing light.
(* The flashing light feature is not available on all
products.)
Do not dispose of in a fire.
Avoid contact with magnetic media.
Avoid extreme temperatures.
Avoid contact with liquid, keep dry.
Do not attempt to disassemble.
Do not rely on this device for emergency
communications.
Only use approved accessories.
![](/img.php?id=824512&img=bg6.png)
SAFETY PRECAUTIONS 5
RADIOFREQUENCY (RF) EXPOSURE
General Statement on RF Energy
Your phone contains a transmitter and a receiver. When
it is ON, it receives and transmits RF energy. When you
communicate with your phone, the system handling
your call controls the power level at which your phone
transmits.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver.
It is designed not to exceed the limits for exposure to
radio waves recommended by international guidelines.
These guidelines were developed by the independent
scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg and the highest SAR value for
this device when tested at the ear was X.XXX W/kg*.
As mobile devices offer a range of functions, they can
be used in other positions, such as on the body as
described in this user guide**. In this case, the highest
tested SAR value is X.XXX W/kg.
As SAR is measured utilising the device’s highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This
is due to automatic changes to the power level of the
device to ensure it only uses the minimum level
required to communicate with the network.
* The tests are carried out in accordance with
international guidelines for testing.
** Please see the section below about body worn
operation.
Body Worn Operation
Important safety information regarding radiofrequency
radiation (RF) exposure:
• To ensure compliance with RF exposure guidelines
the phone must be used with a minimum of 1.5 cm
separation from the body.
• Failure to observe these instructions could result in
your RF exposure exceeding the relevant guideline
limits.
![](/img.php?id=824512&img=bg7.png)
6 SAFETY PRECAUTIONS
Limiting Exposure to Radiofrequency (RF)
Fields
For individuals concerned about limiting their exposure
to RF fields, the World Health Organisation (WHO)
provides the following advice:
• Precautionary measures: Present scientific
information does not indicate the need for any special
precautions for use of mobile phones. If individuals
are concerned, they might choose to limit their own
or their children’s RF exposure by limiting the length
of calls, or using ‘hands-free’ devices to keep mobile
phones away from the head and body.
• For further information readers are referred to:
http://www.who.int/
FCC Notice
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly approved by
the manufacturer responsible for compliance could
void the user’s authority to operate the equipment.
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards that
were developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
SAFETY PRECAUTIONS 7
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg.* Tests for SAR are conducted using
standard operating positions specified by the FCC with
the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels so
as to use only the power required to reach the network.
In general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the public,
it must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for
use at the ear is 0.417 W/kg and when worn on the
body, as described in this user guide, is 0.462 W/kg.
Body-worn Operation; This device was tested for
typical body-worn operations with the back of the
phone kept 1.5 cm from the body. To maintain
compliance with FCC RF exposure requirements, use
accessories that maintain a 1.5 cm separation distance
between the user’s body and the back of the phone. The
use of belt-clips, holsters and similar accessories should
not contain metallic components in its assembly.
The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure
requirements, and should be avoided. While there may
be differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID APYHRO00060.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA)
web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/
kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
![](/img.php?id=824512&img=bg9.png)
8 SAFETY PRECAUTIONS
INFORMATION ON PROPER
DISPOSAL
A. Information on Disposal for Users (private
households)
1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dust bin!
Used electrical and electronic equipment must be
treated separately and in accordance with legislation
that requires proper treatment, recovery and recycling
of used electrical and electronic equipment.
Following the implementation by member states,
private households within the EU states may return
their used electrical and electronic equipment to
designated collection facilities free of charge*. In some
countries* your local retailer may also take back your
old product free of charge if you purchase a similar new
one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has
batteries or accumulators, please dispose of these
separately beforehand according to local requirements.
By disposing of this product correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your
local authorities and ask for the correct method of
disposal.
For Switzerland: Used electrical or electronic
equipment can be returned free of
charge to the dealer, even if you don’t
purchase a new product. Further
collection facilities are listed on the
homepage of www.swico.ch or
www.sens.ch.
Attention: Your product is marked with this symbol.
It means that used electrical and
electronic products should not be mixed
with general household waste. There is a
separate collection system for these
products.
![](/img.php?id=824512&img=bga.png)
SAFETY PRECAUTIONS 9
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you
want to discard it:
Please contact your SHARP dealer who will inform you
about the take-back of the product. You might be
charged for the costs arising from take-back and
recycling. Small products (and small amounts) might
be taken back by your local collection facilities.
For Spain: Please contact the established collection
system or your local authority for take-
back of your used products.
2. In other Countries outside the EU
If you wish to dispose of this product, please contact
your local authorities and ask for the correct method of
disposal.
DISTRACTIONS
Driving
Full attention must be given to driving at all times in
order to reduce the risk of an accident. Using a phone
while driving (even with a handsfree kit) causes
distraction and can lead to an accident. You must
comply with local laws and regulations restricting the
use of wireless devices while driving.
Operating Machinery
Full attention must be given to operating the machinery
in order to reduce the risk of an accident.
PRODUCT HANDLING
General Statement on Handling and Use
You alone are responsible for how you use your phone
and any consequences of its use.
• You must always switch off your phone wherever the
use of a phone is prohibited. Use of your phone is
subject to safety measures designed to protect users
and their environment.
• Always treat your phone and its accessories with care
and keep it in a clean and dust-free place.
• Do not expose your phone or its accessories to open
flames or lit tobacco products.
• Do not expose your phone or its accessories to liquid,
moisture or high humidity.
• Do not drop, throw or try to bend your phone or its
accessories.
• Do not use harsh chemicals, cleaning solvents, or
aerosols to clean the device or its accessories.
• Do not paint your phone or its accessories.
![](/img.php?id=824512&img=bgb.png)
10 SAFETY PRECAUTIONS
• Do not attempt to disassemble your phone or its
accessories. Only authorised personnel must do so.
• Please check local regulations for disposal of
electronic products.
• Do not carry your phone in your back pocket as it
could break when you sit down.
Small Children
Do not leave your phone and its accessories within the
reach of small children or allow them to play with it.
They could hurt themselves or others, or could
accidentally damage the phone.
Your phone contains small parts with sharp edges that
may cause an injury or which could become detached
and create a choking hazard.
Demagnetisation
To avoid the risk of demagnetisation, do not allow
electronic devices or magnetic media close to your
phone for a long time.
Electrostatic Discharge (ESD)
Do not touch the SIM card’s metal connectors.
Antenna Care
Do not cover the built-in antenna (p. 24, No. 22) with
your hand when using the phone as this may interfere
with the performance.
If you cover it, call quality may deteriorate, and may
shorten talk and standby times because the mobile
phone has to operate on a higher power level than is
necessary.
Normal Use Position
When placing or receiving a phone call, hold your
phone to your ear, with the bottom towards your mouth
or as you would a fixed line phone.
Air Bags
• Do not place a phone in the area over an air bag or in
the air bag deployment area.
• Store the phone safely before driving your vehicle.
![](/img.php?id=824512&img=bgc.png)
SAFETY PRECAUTIONS 11
Seizures/Blackouts
If your phone is capable of producing bright flashing
lights, please be careful because it may trigger seizures
or blackouts.
Repetitive Motion Injuries
To minimise the risk of RSI (Repetitive strain injury),
when texting or playing games with your phone:
• Do not grip the phone too tightly.
• Press the buttons lightly.
• Make use of the special features in the handset which
minimise the number of buttons which have to be
pressed, such as message templates and predictive
text.
• Take lots of breaks to stretch and relax.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, which cannot guarantee connection in all
conditions. Therefore, you must never rely solely on
any wireless phone for emergency communications.
Loud Noise
This phone is capable of producing loud noises which
may damage your hearing.
Bright Light
If your phone is capable of producing a bright light, do
not use it too close to the eyes.
Phone Heating
Your phone may become warm during charging and
during normal use.
ELECTRICAL SAFETY
Accessories
• Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage
caused by the use of other chargers, batteries or
accessories.
• Before connecting the phone with a PC or a
peripheral unit, read the operation manual for the
other unit carefully.
• Do not touch the battery terminals. Batteries can
cause damage, injury or burns if a conductive
material touches exposed terminals. When the battery
is detached from the phone, use a cover made of
non-conductive material for keeping and carrying the
battery safely.
![](/img.php?id=824512&img=bgd.png)
12 SAFETY PRECAUTIONS
Connection to a Car
Seek professional advice when connecting a phone
interface to the vehicle electrical system.
Faulty and Damaged Products
• Do not attempt to disassemble the phone or its
accessory.
• Only qualified personnel must service or repair the
phone or its accessory.
• If your phone or its accessory has been submerged in
water, punctured, or subjected to a severe fall, do not
use it until you have taken it to be checked at an
authorised service centre.
INTERFERENCE
General Statement on Interference
Care must be taken when using the phone in close
proximity to personal medical devices, such as
pacemakers and hearing aids.
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 15 cm be maintained between a mobile
phone and a pacemaker to avoid potential interference
with the pacemaker. To achieve this, use the phone on
the opposite ear to your pacemaker and do not carry it
in a breast pocket.
Hearing Aids
• People with hearing aids or other cochlear implants
may experience interfering noises when using
wireless devices or when one is nearby.
• Since the level of interference will depend on the type
of hearing device and the distance from the
interference source, increasing the separation
between them may reduce the interference. You may
also consult your hearing aid manufacturer to discuss
alternatives.
Medical Devices
Please consult your doctor and the device manufacturer
to determine if operation of your phone may interfere
with the operation of your medical device.
Hospitals
Switch off your wireless device when requested to do
so in hospitals, clinics or health care facilities. These
requests are designed to prevent possible interference
with sensitive medical equipment.
![](/img.php?id=824512&img=bge.png)
SAFETY PRECAUTIONS 13
Aircraft
• Switch off your wireless device whenever you are
instructed to do so by airport or airline staff.
• Consult the airline staff about the use of wireless
devices on board the aircraft. If your device offers a
‘flight mode’, it must be enabled prior to boarding an
aircraft.
Interference in Cars
Please note that because of possible interference to
electronic equipment, some vehicle manufacturers
forbid the use of mobile phones in their vehicles unless
a handsfree kit with an external antenna is included in
the installation.
EXPLOSIVE ENVIRONMENTS
Petrol Stations and Explosive Atmospheres
• In locations with potentially explosive atmospheres,
obey all posted signs to turn off wireless devices such
as your phone or other radio equipment.
• Areas with potentially explosive atmospheres
include fuelling areas, below decks on boats, fuel or
chemical transfer or storage facilities, areas where
the air contains chemicals or particles, such as grain,
dust, or metal powders.
Blasting Caps and Areas
To avoid interfering with blasting operations, turn off
your mobile phone or wireless device when in a
blasting area or in areas posted “turn off two-way radios
or electronic devices”.
![](/img.php?id=824512&img=bgf.png)
14 CONDITIONS OF USE
CONDITIONS OF USE
Battery
•Network configuration and phone usage will
affect talk-time and standby time.
Using the games or camera will hasten battery
consumption.
•When the battery charging alert is displayed on
the screen, charge the battery as soon as possible.
If you continue using your phone ignoring the alert,
the phone may cease to function, and all data and
settings you have stored may be lost.
• Before removing the battery from the phone, make
sure the phone is switched off.
• Replace and charge the new battery as soon as
possible after removing the old one.
• Recommended temperature for using and storing
batteries is approximately 20°C.
• The batteries’ performance is limited in low
temperatures, particularly below 0°C and the phone
may not work temporarily regardless of the amount
of remaining battery power.
• The battery can be charged and discharged hundreds
of times but it will eventually wear out. When the
operating time (talk-time and standby time) is
noticeably shorter than normal, it is time to buy a new
battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 26.
Memory Card
• Do not remove or insert a memory card while data on
the card is being edited. Do not turn off the phone or
device containing the memory card while data on the
card is being edited as this may damage the data or
cause the card to stop functioning correctly.
• Data may be lost under the following circumstances.
- If the phone is dropped, shaken or force is applied
while the memory card is inserted.
- When the phone is used in areas that are exposed to
static electricity or electric noise.
• Back up your important data in case data on the
memory cards are lost due to malfunctions.
• Do not touch the metal terminals with your hands or
metal objects.
• Do not bend the memory card or subject it to violent
impact. Keep it away from water and high
temperatures.
![](/img.php?id=824512&img=bg10.png)
CONDITIONS OF USE 15
• SHARP holds no responsibility for the loss or
damage of data contained on a memory card.
• Keep all memory cards out of the reach of small
children.
• Be sure to insert the memory card in the correct
direction and orientation.
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking
pictures.
If the phone moves while taking a picture, the picture
can become blurred. When taking a picture, hold the
phone firmly to prevent it from moving, or use the
delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before
taking a picture.
Others
• As with any electronic storage unit, data may be lost
or corrupted under various circumstances.
• If the phone’s battery has been removed for some
time, or the phone has been reset, the unit’s clock and
calendar may be reinitialised. The date and time
should be updated in this case.
• Use only specified handsfree kits (supplied or
optional). Some phone’s functions may not work
when unauthorised handsfree kit is used.
![](/img.php?id=824512&img=bg11.png)
16 Contents
Contents
Introduction ................................................. 1
SAFETY PRECAUTIONS ............................. 4
RADIOFREQUENCY (RF)
EXPOSURE ................................................ 5
INFORMATION ON PROPER
DISPOSAL .................................................. 8
DISTRACTIONS ........................................ 9
PRODUCT HANDLING ............................ 9
ELECTRICAL SAFETY .......................... 11
INTERFERENCE ..................................... 12
EXPLOSIVE ENVIRONMENTS ............. 13
CONDITIONS OF USE ............................... 14
List of Menu Functions ............................. 18
Your Phone ................................................ 21
Optional Accessories ................................. 21
Getting Started .......................................... 22
Inserting/Removing the SIM Card and the
Battery ....................................................... 25
Charging the Battery ................................. 27
Inserting/Removing the Memory Card ...... 28
Connecting the Handsfree Kit ................... 29
Turning Your Phone On and Off ............... 30
Slide Functions and Keypad Lock ............. 31
Display Indicators ...................................... 32
Navigating Functions ................................34
Voice Call/Video Call Functions ...............35
Entering Characters ..................................47
Changing the Input Language .................... 48
Changing the Input Mode .......................... 48
My Dictionary ............................................ 49
Using Templates ........................................ 49
Using the Menu ..........................................50
Main Menu ................................................ 50
Shortcut Keys ............................................ 50
Contacts Manager .....................................51
Sending a Message from the Contacts
List ............................................................. 54
Multimedia ..................................................63
Camera .......................................................73
Taking Pictures .......................................... 73
Recording Video Clips .............................. 74
Contents 17
Common Functions in the Photo and
Video Camera Modes ................................74
Functions in Photo Camera Mode ............. 77
Functions in Video Camera Mode ............. 80
Messaging .................................................. 81
SMS ........................................................... 81
MMS .......................................................... 81
Email .......................................................... 81
Vodafone live! .......................................... 100
Navigating a WAP Page .......................... 101
My Items ................................................... 105
Games & Applications ............................ 114
Organiser & Utilities ................................ 120
SIM Application ....................................... 132
Settings .................................................... 133
Telephony ................................................ 157
Connecting 880SH to Your PC ............... 167
System Requirements .............................. 167
3G/GSM Modem ..................................... 167
Handset Manager ..................................... 169
Music Manager ........................................ 170
Sync Manager .......................................... 172
Troubleshooting ...................................... 173
Index ......................................................... 175
![](/img.php?id=824512&img=bg13.png)
18 List of Menu Functions
List of Menu Functions
880SH functions are listed below.
See relevant page for details of each function. The menu’s corresponding number is used for shortcuts. For details,
see page 50.
1Mobile TV p. 69
2Vodafone live!
1Vodafone live!
2Enter URL
3Bookmarks
4Alert Inbox
5Saved Page
6Access History
7
Browser Settings
8Music
9Games
10 Ringtones
11 Pictures
12 News
13 Sport
p. 100
p. 100
p. 100
p. 100
p. 100
p. 100
p. 102
–
–
–
–
–
–
3Multimedia
1Music
2Video
3FM Radio
4Mobile TV
5Radio DJ
6Streaming
p. 63
p. 65
p. 68
p. 69
p. 69
p. 72
4Camera p. 73
5Messaging
1Create
Message
2Inbox
3Drafts
4Sent
5Outbox
6Instant
Messenger*
7Templates
8Media Album*
9Cell Broadcast
10 Messaging
Settings
11 Memory Status
p. 82
p. 86
p. 85
p. 82
p. 85
p. 90
p. 49
–
p. 94
p. 95
–
6My Items
1Pictures
2Music &
Ringtones
3Videos
4Themes
5Games &
Applications
6
Text Temp l ates
7
Other Documents
8Memory Status
p. 105
p. 106
p. 107
p. 108
p. 108
p. 109
p. 109
p. 113
7Organiser & Utilities
(Tab 1: Organiser)
1Alarms
2Calendar
3Stopwatch
4Tasks
5World Clock
6
Countdown Timer
(Tab 2: Utilities)
1Calculator
2
Voice Recorder
3
Expenses Memo
4Phone Help
p. 120
p. 121
p. 125
p. 125
p. 128
p. 128
p. 129
p. 130
p. 131
p. 131
8Contacts Manager
(Tab 1: Contacts)
1Contacts List
2
Add New Contact
3My Contact
Details
(Tab 2: Services)
1Call Voicemail
2Speed Dial List
3Synchronise
4
Service Dialling
Numbers
**
5Fixed Dialling
Numbers*
*
(Tab 3: Settings)
1
Manage Groups
2
Manage Category
3
Manage Contacts
4
Contacts Settings
p. 51
p. 51
p. 52
–
p. 62
p. 60
p. 54
p. 160
p. 55
p. 61
p. 58
p. 51
*This menu is not
available with some
service providers.
![](/img.php?id=824512&img=bg14.png)
List of Menu Functions 19
9Telephony
(Tab 1: Call Log)
1All Calls
2Dialled
Numbers
3Missed Calls
4
Received Calls
5Call Timers
6Call Costs*
*
7Data Counter
(Tab 2: Call)
1Voice
2Video
3Contacts List
4Call Voicemail
5
Service Dialling
Numbers
**
(Tab 3: Call
Restrictions)
1Outgoing Calls
2Incoming Calls
3Fixed Dialling
Numbers*
*
4Rejected
Numbers
5Withheld Call
6Change N/W
Password
p. 157
p. 157
p. 157
p. 157
p. 157
p. 158
p. 159
–
p. 53
p. 53
p. 54
p. 54
p. 159
p. 159
p. 160
p. 161
p. 161
p. 162
(Tab 4: Call
Settings)
1Video Call
Settings
2Voicemail &
Diverts
3Call Waiting
4
Show My Number
5Time & Cost
6Minute Minder
7Auto Redial
p. 162
p. 164
p. 166
p. 166
p. 166
p. 166
p. 166
10 SIM
Application**
p. 132
11 Games & Applications
1Games &
Applications
2Java™
Settings
3Java™
Information
p. 114
p. 117
p. 119
12 Settings
(Tab 1: Profiles)
1Normal
2Meeting
3Activity
4Car
5Headset
6Silent
(Tab 2: Phone
Settings)
1Display
2
Sounds & Alerts
3Slider Settings
4Date & Time
5Language
6
Earpiece Volume
7Shortcuts
8Security
(Tab 3: Connectivity)
1Bluetooth
2Mass Storage
3USB Charge
4Memory Card
p. 133
p. 133
p. 133
p. 133
p. 133
p. 133
p. 137
p. 141
p. 141
p. 142
p. 144
–
p. 144
p. 144
p. 147
p. 151
p. 151
p. 151
(Tab 4: Other
Settings)
1Call Settings
2Messaging
Settings
3Java™
Settings
4
Browser Settings
5
Network Settings
6
Internet Settings
p. 162
p. 95
p. 117
p. 102
p. 152
p. 154
** Depends on SIM card
contents.
![](/img.php?id=824512&img=bg15.png)
20 List of Menu Functions
Note for the menu references for the Postcard, Media Album and other services
•The menu references for the Postcard, Media Album and other services vary in the United Kingdom and Ireland
and South Africa as follows:
Current references in the user
guide
References in United
Kingdom References in Ireland South Africa
“Postcard” “live! Postcard” (Not available) (Not available)
“Additional Information” “Additional information” (Not available) (Not available)
“Street & Number” “Address” “Street & Number” “Street & Number”
“State/Province” “County” “State/Province” “State/Province”
“Postal Code” “Post Code” “Postal Code” “Postal Code”
“Media Album” “live! Studio” “Picture Album” “live! Studio”
“To Media Album” “To live! Studio” “To Picture Album” “To live! Studio”
![](/img.php?id=824512&img=bg16.png)
Your Phone 21
Your Phone
Please check the following carefully. Your phone
should come complete with:
• HSDPA/3G (UMTS)/EDGE/GSM 900/1800/1900
GPRS phone
• Rechargeable Li-ion Battery
• AC Charger
• Stereo Handsfree
•CD-ROM
• microSD™ Memory Card*
•User Guide
• Quick Start Guide*
* This item is not provided in some areas.
Optional Accessories
• Li-ion Spare Battery (XN-1BT80)
• Cigarette Lighter Charger (XN-1CL30)
• USB Data Cable (XN-1DC30)
• AC Charger (XN-1QC30, XN-1QC31)
• Handsfree Microphone Unit (XN-1HU90)
• Stereo Headset (XN-1HS90)
The above accessories may not be available in all
regions.
For details, please contact your dealer.
![](/img.php?id=824512&img=bg17.png)
22 Getting Started
Getting Started
2 10
20
11
14
12
1
12
1313
15
16
3
5
7
6
8
9
4
19
18
17
22
21
23
24
25
26
27
Getting Started 23
1. Sub Camera
2. Small Light:
Flashes when an incoming call or a new message is
received or missed, if Event Light or Status Light
(p. 141) is enabled.
3. Navigation Keys (Arrow Keys): abcd
Moves cursor to highlight a menu item, etc.*
Up or Down arrow key (ab) displays Contacts
List entries in standby.
Left arrow key (c) displays the Create Message
screen in standby.
Right arrow key (d) displays the monthly or
weekly calendar in standby.
4. Centre Key: B
Displays Main menu in standby, and executes
functions.
Press and hold in standby to initiate keypad lock.
Press and hold when keypad is locked to unlock
keypad.
5. Left Soft Key: A
Executes the function in the lower left of the screen.
Displays Main menu in standby.*
6. Send/Redial Key: D
Makes voice calls or accepts calls, and displays the
call logs in standby.
7. Video Telephony Key: S
Makes video calls or accepts calls, and displays the
video call screen in standby.
8. Voicemail Key: G
Press and hold to connect to the Voicemail centre.
(Depending on the SIM card.)
9. * /Shift Key: P
Switches character case between four modes: Abc,
ABC, 123 and abc on the text entry screen.
Press to enter P, ?, – or * in standby.
10.Earpiece/Speaker
11.Display
12.Right Soft Key: C
Executes the function in the lower right of the
screen.
Accesses “Vodafone live!” by opening the browser
in standby.*
13.End/Power Key: F
Ends a call and turns power on/off.
24 Getting Started
14.Multimedia Key: T
While in standby:
Relaunches the corresponding player if playing
music in the background.
Displays Multimedia menu if not playing music.
15.Shortcut Key: U
Displays the Shortcuts menu in standby.*
The Shortcuts menu (p. 144) allows you to change
the default standby assignment of the Navigation,
Left and Right Soft and Shortcut Keys (2, 4, 11 and
14).
16.Message Key: E
Displays Messaging menu.
17.Keypad
18.#/Silent Key: R
Displays symbol screen on the text entry screen.
Press and hold to switch languages on the text entry
screen. Press and hold in standby to switch Profiles
settings between the mode most recently activated
and Silent mode.
19.Microphone
20.External Connector:
Used to connect either the charger or a USB data
cable.
21.Main Camera
22.Built-in Antenna:
Warning: Do not cover the lower part of the phone
with your hand when in use as this may interfere
with the performance of the built-in antenna.
23.Battery Cover
24.Camera Key: X
Press and hold in standby to activate the camera.
Takes a picture or starts recording video when the
camera is active.
Press during an incoming call alert to answer the
call.
25.Side Keys: VW
Press in standby or during a call to increase or
decrease the earpiece volume.
Press during incoming call to mute the ringer or
disable vibration mode (if active).
Press while listening to music (or video) to increase
or decrease the earpiece volume.
26.Handsfree Kit/Microphone Connector
27.microSD Card Slot
* Default standby assignment can be changed via the
Shortcuts menu. See “Shortcuts” on page 144.
![](/img.php?id=824512&img=bg1a.png)
Getting Started 25
Inserting/Removing the SIM Card and
the Battery
1. Slide off the battery cover ( ).
2. Unlock the SIM lock , slide the SIM card into the
SIM holder , and lock the SIM lock .
3. Hold the battery so that the metal contacts of the
battery are facing down, slide the guides on the top
of the battery into the battery slots , and then
insert it .
4. Replace the battery cover.
Note
•Make sure that only 3V SIM cards are used.
•Make sure that the standard accessory battery is
used.
SIM card
26 Getting Started
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points
concerning battery disposal:
• Take the used battery to your local waste depot,
dealer or customer service centre for recycling.
• Do not expose the used battery to a naked flame,
immerse in water or dispose with the household
waste.
![](/img.php?id=824512&img=bg1c.png)
Getting Started 27
Charging the Battery
You must charge the battery for at least 150 minutes
before using your phone for the first time.
Using the Charger
1. Open the cover of the external connector, and
connect the charger horizontally to the external
socket located at the bottom of the phone until it
clicks.
2. Connect the charger to an AC outlet.
When the phone is charging, the battery status icon
( ) displays the current status. The Small Light
also lights up.
Standard charging time: Approx. 150 minutes
Note
•Charging time may vary depending on the state of the
battery and other conditions. (See “Battery” on
page 14.)
To Disconnect the Charger
When charging is complete, the battery indicator icon
displays the full charge status.
1. Unplug the charger from the AC outlet.
2. Push and hold the side buttons of the charger ,
then disconnect the charger from the external socket
of the phone .
3. Close the cover.
Note
•Do not use any non-approved chargers as they may
damage your phone and invalidate any warranties,
see “Battery” on page 14 for details.
•Forcibly disconnecting the charger may cause
malfunction.
![](/img.php?id=824512&img=bg1d.png)
28 Getting Started
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power
for charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right
of the screen.
Low Battery during Use
When the battery is running low, an alarm will sound
and “ ” is displayed on the screen.
If you are using your phone and you hear the low
battery alarm, attach your charger as soon as possible.
The phone may not be able to continue normal
operation if you continue to use it.
Inserting/Removing the Memory Card
Note
•Make sure that the phone is turned off before
inserting/removing the memory card.
•Be sure to insert the card in the correct direction and
orientation.
•Keep all memory cards out of the reach of small
children.
1. Turn off the phone.
2. Open the microSD card slot cover.
Battery Indicators Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
![](/img.php?id=824512&img=bg1e.png)
Getting Started 29
3. Insert the memory card until it clicks. (To remove
the memory card, push the memory card until it
clicks.)
4. Close the cover.
Tip
•You see the following indicators when the memory
card is in use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
Make sure the card is properly inserted.
: Appears when the card is being written to or
read.
: Appears when the card is being formatted.
Connecting the Handsfree Kit
1. Open the connector cover.
2. Connect the handsfree kit.
30 Getting Started
Turning Your Phone On and Off
To turn the power on or off, press and hold F for
approximately 2 seconds.
To Enter the PIN Code
If the PIN (Personal Identification Number) code is
enabled you are asked to enter the PIN code each time
the phone is switched on. For details on setting the PIN
code, see “Enabling/Disabling the PIN Code” on
page 145.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press B.
Note
•If your PIN code is entered incorrectly three times in
a row, the SIM card is locked. See “Enabling/
Disabling the PIN Code” on page 145.
•If the clock settings have not been entered, the date
and time entry screen is displayed (p. 142).
To Copy All Contacts List Entries from the SIM
Card
When you insert the SIM card into your phone for the
first time and start the Contacts List application, you are
asked whether you wish to copy Contacts List entries
on the SIM card. Follow the on-screen instructions, or
you can do it later using the Contacts List menu as
follows:
“Contacts Manager”
→
“Settings” tab
→
“Manage
Contacts”
→
“Copy All Entries”
1. Select “From SIM to Handset”.
![](/img.php?id=824512&img=bg20.png)
Getting Started 31
Slide Functions and Keypad Lock
When your phone is on, you can make a call or answer
an incoming call by sliding open your phone.
You can terminate the call and lock the keypad to
prevent it from being pressed accidentally by sliding
close your phone.
You can also operate the following actions by sliding
open/close your phone.
When opened:
• The display and keypad light up.
• The keypad is unlocked.
• Incoming calls can be answered.
See “Slider Settings” on page 141.
When closed:
• Most applications are unaffected.
• The handset sends a busy tone to the caller.
• Calls are terminated.
See “Slider Settings” on page 141.
Note
•You can use the following applications even when
your phone is closed:
Browser, Camera/Video Camera, Video Player,
Video Streaming player and Audio Streaming player.
•Some Java™ applications are not suspended when
your phone is closed.
•Do not stick items to the back of the display.
![](/img.php?id=824512&img=bg21.png)
32 Getting Started
Display Indicators
1. / : Strength of received signal/Service out
of range
: 3G (UMTS)/GPRS
/ : GPRS enabled/GPRS
disabled
: Roaming outside network
2. : Flight mode
3. : Data exchange with external device
4. / : Connection to the server [established/
communicating]
5. / : Voice call [incoming/in progress]
6. / / : Video call communication mode
enabled [voice/video/voice and video]
7. / / : Alerts [text message and multimedia
message/Email/Instant Messenger]
8. / / : Mailbox full [SIM card only/handset
only/both SIM card and handset]
9. : Logging in the Instant Messenger
10. : “Voice Calls” diverts set to “Always”
11. ////:
Connection status
[USB cable/Bluetooth wireless setting
[enabled (in standby)/exchanging
information/talking with the Bluetooth
headset/Hide my phone]]
12. ///:
Java™ application [executed (colour)/
suspended (grey)]/Music player/FM
Radio
13. : Secure WAP page displayed
Right soft keyCentre keyLeft soft key
Indicator area
![](/img.php?id=824512&img=bg22.png)
Getting Started 33
14. / / / :
Silent/vibration setting [silent/
increasing volume/vibration enabled/
silent and vibration enabled]
15. / / : Speaker mode [speaker phone/speaker
activated/microphone muted]
16. : Memory card inserted
17. : Battery level
18. : Daily alarm enabled
19. / : Schedule entry enabled [with/without
reminder alarm]
20. : Outbox contains unsent messages [text
message/multimedia/Email]
21. / / : WAP/OTA provisioning alerts [WAP
alert/OTA provisioning alert/WAP and
OTA provisioning alerts]
22. : Voicemail message alert
23. : “Show Secret Data” set to “On”
24. : Function Lock enabled
25. : Keypad Lock enabled
26.(No display)/////:
Current profile [Normal/Meeting/
Activity/Car/Headset/Silent]
![](/img.php?id=824512&img=bg23.png)
34 Navigating Functions
Navigating Functions
All applications are accessed from the Main menu. To
open the Main menu, press the centre key B in
standby.
To launch applications, you will need to highlight menu
items, and make selections. To select a menu item
(indicated in quotation marks), move the cursor using
a, b, c and d, and press B to select.
In certain procedures, you will need to press one of the
soft keys (indicated in square brackets), which are
displayed in the lower left and right of the screen. Press
the corresponding soft key (A or C).
To return to the previous screen, press the right soft key
if it displays Back. To close the Main menu, press the
right soft key if it displays Exit.
Each section in this user guide starts with a list of items
you will need to select in order (indicated in italics)
before performing the procedures shown. Select each
item to reveal the next set of items that you have to
choose from. Open subsection items after opening
those listed in the main section.
Example:
“Games & Applications”
→
“Java™ Settings”
→
“Synchronisation”
The following menus have tabs - Instant Messenger,
Organiser & Utilities, Contacts Manager, Telephony
and Settings.
You can select the desired tab with the c/d key, and
after that you can select the item you wish to set in the
selected tab with the a/b key.
Example:
“Telephony”
→
“Call Log” tab
→
“All Calls”
![](/img.php?id=824512&img=bg24.png)
Voice Call/Video Call Functions 35
Voice Call/Video Call
Functions
For details on setting call functions, see “Telephony”
on page 157.
Making a Voice Call
1. Enter the area code and the phone number you wish
to dial and press D to dial.
If you enter the wrong number, press [Clear] to
delete the number to the left of the cursor.
Emergency Calls
1. Enter 112 (international emergency number) using
the keypad and press D to dial.
Note
•Emergency calls may not be able to be made on all
mobile phone networks when certain network
services and/or phone features are in use. Contact
your service provider for more information.
•This emergency number can normally be used to
make an emergency call in any country, with or
without a SIM card inserted, if a 3G (UMTS)/GSM
network is within range.
International Calls
1. Press and hold Q until a + (international dialling
prefix) sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number,
and press D to dial.
36 Voice Call/Video Call Functions
Adding an Entered Phone Number to the
Contacts List
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Adding a
New Contact” on page 51.
Showing or Hiding My Phone Number on the
Display of the Called Party
1. After entering a phone number, press [Options],
select “Show My ID” or “Hide My ID” and press D
to dial.
Speed Dialling
Up to 8 phone numbers from the Contacts List memory
(Handset and SIM) can be assigned to speed dials. You
can call the numbers using the digit keys (G to O).
The phone number of the Voicemail centre is assigned
to G.
For details on setting the speed dial list, see “Speed Dial
List” on page 62.
1. To dial a number using the speed dial, press and
hold any of the digit keys (G to O).
The phone number saved in the speed dial list is
dialled.
Redialling
You can redial numbers in the call log. Select from
specific categories or “All Calls”. Specific categories
contain up to 30 numbers and the “All Calls” list
contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled
Numbers”, “Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial a voice call or S to redial a
video call.
Voice Call/Video Call Functions 37
Answering a Voice Call
When an incoming call is detected, the phone rings.
1. Press D, B or press [Options] and select “Answer”
to answer the call.
Or press any key except F, [Options] or [Busy]
when the “Any Key Answer” function is enabled.
Set the Any Key Answer function in the profile of
each mode (p. 137).
You can answer an incoming call by sliding open
your phone if “Calls on Open” is set to “Accept
Call” in Slider Settings (p. 141).
Tip
•If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name is displayed on
the screen.
•If the number is a restricted number, the display
shows “Withheld”.
•When you receive a call from the person whose
picture is registered in the Contacts List, the picture
and name are displayed.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call
you do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a
busy tone to the caller.
In Call Menu (Voice Call)
Your phone has additional functions available while a
call is in progress.
38 Voice Call/Video Call Functions
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree kit
volume, if connected) to five levels.
1.
Press
V
or
W
to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call
or press W (or b/c) to decrease the volume.
3. Press B when the volume is set to the desired level.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it
is on.
1. During a call, press [Options] and select
“Loudspeaker On”.
Putting a Call on Hold
This function allows you to manage two calls at the
same time. If you wish to make another call while you
are talking to someone, you can put the current call on
hold to call someone else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another
call to, then press D.
Tip
•You can also make another call by entering the phone
number during a call instead of step 1. The current
call is automatically put on hold.
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select
“Messaging”.
The following options are available: “Create
Message” to make an SMS and MMS, or “Inbox”,
“Sent” or “Drafts” to access these folders. For
details on SMS and MMS, see “SMS” and “MMS”
on page 81.
Voice Call/Video Call Functions 39
Call Waiting
This service notifies you of another incoming call while
you have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to
the second caller.
Note
•You need to set “Call Waiting” to “On” if you wish
to use the Call Waiting service (p. 166).
•Call Waiting service may not be available on all
networks. Contact your service provider for more
information.
•If you do not wish to answer the second call, press
[Options] and select “Busy” in step 1. If “Reject” is
selected, the log of the second call is saved as a
missed call.
Conference Call
Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Join All
Calls” to join the conference call.
2. Press F to end the conference call.
Note
•The conference call service may not be available on
all networks. Contact your service provider for more
information.
•To end the call with all participants, press [Options]
and select “End All Calls”.
•To reject adding more participants to the current
party, press [Options] and select “Reject”, or you
can send the busy tone by selecting “Busy”.
•You have more options for the Conference call after
selecting “Join All Calls” in step 1:
•To put all participants on hold, select “Hold All”.
•To put all participants except the current call on
hold, select “Private Conversation”.
40 Voice Call/Video Call Functions
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the
conference call and press D to dial.
3. Press [Options] and select “Join All Calls” to join
the conference call.
If you wish to add other participants, repeat steps 1
to 3.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that
you wish to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
To Have a Private Conversation with One of the
Participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you
wish to talk to.
2. Press [Options] and select “Private Conversation”.
3. Once you have finished the private conversation,
press [Options] and select “Join All Calls” to return
to the conference call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
![](/img.php?id=824512&img=bg2a.png)
Voice Call/Video Call Functions 41
Making a Video Call
Note
•Video calls can only be made and received if both
parties have 3G capable phones and 3G coverage.
See “Display Indicators” on page 32.
•Make sure that the battery is fully charged and the
signal is strong before using this function.
•Turn the loudspeaker on or use a handsfree kit so that
you can talk while looking at the video call screen on
the display.
Status Indicators
1. Sub screen for your image
2. Elapsed time
3. Main screen for the other party’s screen
4. Other party’s name or phone number
1
3
2
4
42 Voice Call/Video Call Functions
Making a Video Call
To Make a Video Call by Entering the Phone
Number First
1. Enter the area code and the phone number you wish
to dial.
2. Press [Options] and select “Video Call” or press
S to dial.
If you enter the wrong number, press [Clear] to
delete the number to the left of the cursor.
When connected, the image of the called party is
displayed in the upper part of the screen and yours
in the lower left.
Tip
•If the called party’s phone is not video call enabled,
you can press F and enter the phone number again
to make a voice call.
To Make a Video Call with the Video Telephony
Key
1. Press S.
Your image is displayed in the upper part of the
screen.
2. Enter the phone number or press [Options] and
select “Call Log”, “Contacts” or “Enter Number”.
3. Once the desired number has been selected, press
S.
To Make a Video Call Using Speed Dial
1. Press S.
Your image is displayed in the upper part of the
screen.
2. Press and hold any of the digit keys (G to O).
The phone number saved in the speed dial list is
dialled. When connected, the image of the called
party is displayed in the upper part of the screen and
yours in the lower left.
Voice Call/Video Call Functions 43
Answering a Video Call
When an incoming call is detected, the phone rings.
1. Press D to answer the call with video or press
[Options] and select “Hide Picture” to answer with
voice only.
If the slider is closed, you can answer the call (with
video) by sliding open the phone when the “Calls on
Open” function is enabled.
Tip
•If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name is displayed on
the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call
you do not wish to answer.
You can reject an incoming call by sliding close
your phone if “Calls on Close” is set to “End Call”
in Slider Settings (p. 141).
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a
busy tone to the caller of an incoming call letting
them know that you cannot answer the call.
In Call Menu (Video Call)
Muting the Microphone
1. During a video call, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub
screens.
1. During a video call, press [Options] and select
“Switch Images”.
44 Voice Call/Video Call Functions
Changing the Image of Yourself
1. During a video call, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
“Internal Camera”: The image through the sub
camera is displayed and sent
to the receiver.
“External Camera”: The image through the
camera is displayed and sent
to the receiver.
“Alternative Image”: The camera is turned off and
the image selected in
“Alternative Image” of
“Video Call Settings” is
used.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it
is on.
1. During a video call, press [Options] and select
“Loudspeaker On”.
Note
•In a high-noise environment, you may not be able to
continue a call, or make a clear call. We recommend
that you use the handsfree kit.
•With this option, there may be interruption if you
increase the earpiece volume. We recommend that
you decrease the earpiece volume or use the
handsfree kit.
Voice Call/Video Call Functions 45
Video Call Settings
To Adjust the Quality of the Incoming or Outgoing
Image
You can adjust the quality of the called party’s or
caller’s image.
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Incoming Picture Quality” or “Outgoing
Picture Quality”.
3. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
“Normal”: The standard quality is used.
“Quality Priority”: The quality of the picture
takes precedence over the
frame rate.
“
Frame Rate Priority
”: The frame rate takes
precedence over the quality.
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Backlight”.
3. Select “Always On”, “Always Off” or “As Normal
Setting”.
When “Always On” is selected, the backlight will
always be on during a video call.
When “As Normal Setting” is selected, the
backlight will time out depending on the Backlight
setting (p. 140).
To Adjust the Video Exposure
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Exposure”.
3. Press a (Light) or b (Dark).
46 Voice Call/Video Call Functions
Mirror Image
During a video call, you can reverse your image on the
sub screen.
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Mirror Image”.
3. Select “On” or “Off”.
To Change the Sub Camera Image to the
Alternative Image
During a video call, you can switch the image shown to
the caller between the sub camera image and an
alternative image or display an image while putting a
call on hold from the saved picture files.
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Camera Picture” and then select “Default
Image” or “Alternative Image”.
3. Select the desired option.
If “Default Image” is selected, select “Internal
Camera”, “External Camera” or “Alternative
Image”.
If “Alternative Image” is selected, select “Preset
Picture” or “My Pictures”.
![](/img.php?id=824512&img=bg30.png)
Entering Characters 47
Entering Characters
When entering characters to create Contacts List
entries, text messages or multimedia messages, etc.,
press the corresponding keys.
In multi-tap input method, press each key until the
desired character is displayed. For example, press H
once for the letter A or twice for the letter B.
Press the following keys to:
Press and hold the following keys to:
G: Enter:
. (full-stop) , (comma) - (hyphen) ? !
’ (apostrophe) @ :1
Q: Enter:
(space)+ = < > € £ $ ¥ % &0
P: Switch character case among four modes:
Abc, ABC, 123 and abc.
R: Enter other characters.
G- O:
QEnter 0 - 9 numbers.
P: Shift between multi-tap and T9 mode.
R: Display the language options screen.
48 Entering Characters
Changing the Input Language
1. On the text entry screen, press [Options] and select
“Input Language”.
2. Select the desired language.
Changing the Input Mode
T9 Text Input
T9 text input method is a shortcut to enter text easily
and quickly.
1. On the text entry screen, press and hold P to enter
T9 mode.
2. Press [Options] and select “Input Mode”.
3. Select the input mode (Abc, ABC, 123, abc).
4. Press each key once for any letter you require on
that key.
To enter the word “How”, press JLO.
5. If the word shown is not the one you want, press a
or b until you highlight the correct one.
6. Press B to select the word.
Note
•If the correct word is not shown in step 5, enter the
correct word again after switching to the multi-tap
input method.
Tip
•If you press Q instead of step 6, a space is inserted
next to the selected word.
Symbols and Punctuation
1. On the text entry screen, press [Options] and select
“Add Symbol”.
2. Select the desired symbol.
Entering Characters 49
My Dictionary
You can create your own word list for T9 text input.
1. On the text entry screen in T9 mode, press [Options]
and select “My Dictionary”.
2. Select “Add New Word” and enter a new word.
Editing a Word in the List
1. On the text entry screen in T9 mode, press [Options]
and select “My Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
Using Templates
You can use the phrases registered in Text Templates
when entering characters.
For details on creating the text template, see “Adding
Phrases to Text Templates” on page 109.
1. On the text entry screen, move the cursor to the
point you wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to
be cut, then press B.
4. Move the cursor to the last letter to highlight the
area, then press B.
5. Move the cursor to the point you wish to paste the
letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
![](/img.php?id=824512&img=bg33.png)
50 Using the Menu
Using the Menu
Main Menu
1. Press B in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired
menu, then press B to access the function.
For details on the menu options, see “List of Menu
Functions” on page 18.
Shortcut Keys
You can access menus by pressing B and digit keys for
the corresponding number on the Main menu. For
numbers 10 to 12, press B and P (10), Q (11) or
R (12). For menus with tabs, press d (or c when
necessary) to select the desired tab before pressing the
digit keys. See “List of Menu Functions” on page 18.
Shortcuts are listed in the headings of this user guide.
Example (p. 53): To Access “Name Order” Sub Menu
Changing the Name Order
“Contacts Manager”
→
“Settings” tab
→
“Contacts
Settings”
→
“Name Order”
Press BN and d twice for the “Settings” tab, then
press JG.
Example (p. 125): To Access “Tasks” Sub Menu
Tasks
Press BMJ.
Note
•The shortcut keys work for the first three menu levels
only.
(M 8-d-d-4-1)
(M 7-4)
![](/img.php?id=824512&img=bg34.png)
Contacts Manager 51
Contacts Manager
You can store the phone numbers and Email addresses
of your friends, family and colleagues in the Contacts
List.
Your phone can store up to 500 entries. For each entry,
you can enter information including up to 3 phone
numbers and 3 Email addresses. There is a limit to the
number of characters that can be entered for each item.
The character limit differs for the handset memory and
SIM card memory.
Adding a New Contact
The amount of phone numbers that you can store to the
SIM card is dependent on its capacity. Contact your
service provider for details.
Selecting the Storage Memory
You can choose either the phone or SIM card memory
locations to store the new entry.
“Contacts Manager”
→
“Settings” tab
→
“Contacts
Settings”
→
“Save New Contact to”
1. Select from “Handset”, “SIM” or “Choose before
Saving”.
If the selected location is different from the list
displayed, a confirmation message is displayed.
Tip
•“Choose before Saving” prompts you to choose the
memory every time you save a new entry.
Registering a New Entry
“Contacts Manager”
→
“Contacts” tab
→
“Add New
Contact”
If you select the “Choose before Saving” option for the
memory to be used, the selection is between “To
Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the
relevant information.
2. Press [Save], when finished.
Tip
•To create an entry, at least one field must be filled
(“First Name”, “Last Name”, “Phone Number” or
“Email Address” for the handset memory; “Name”
or “Phone Number” for the SIM memory).
(M 8)
(M 8-d-d-4-3)
(M 8-2)
52 Contacts Manager
Saving an Unregistered Number
After the call ends, you can have the confirmation
screen asking you if you wish to register the number to
the Contacts List.
“Contacts Manager”
→
“Settings” tab
→
“Contacts
Settings”
→
“Save Unregistered”
1. Select “Incoming Call” or “Outgoing Call”.
2. Select “On” or “Off”.
Registering My Contact Details
You can register and edit your own contact as with
other Contacts List entries.
“Contacts Manager”
→
“Contacts” tab
→
“My
Contact Details”
Searching for an Entry
You can search for the desired entry by entering the first
few letters of the name or by sorting the entries.
Changing the List Displayed
“Contacts Manager”
→
“Settings” tab
→
“Contacts
Settings”
→
“Contacts Location”
1. Select from “Handset”, “SIM” or “Both”.
If the selected location is different from the contact
storage memory, a confirmation message is
displayed.
Finding a Name
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
1. Enter the first few letters of the name.
The first name corresponding to the entered letters
is highlighted.
Tip
•You can select the Contacts location from
“Handset”, “SIM” or “Both” before searching.
(M 8-d-d-4-5)
(M 8-3)
(M 8-d-d-4-2)
Contacts Manager 53
Changing the Name Order
“Contacts Manager”
→
“Settings” tab
→
“Contacts
Settings”
→
“Name Order”
1. Select “First-Last Name” or “Last-First Name”.
Sorting the Contacts List Entries
You can change the listing order of the Contacts List
entries to alphabetical order or by different categories.
“Contacts Manager”
→
“Settings” tab
→
“Contacts
Settings”
→
“Sort Contacts”
1. Select “By Alphabet” or “By Category”.
Dialling from the Contacts List
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
Tip
•You can also display the Contacts List in the
following procedure:
“Telephony”
→
“Call” tab
→
“Contacts List”
1. Highlight the desired entry and press D (voice call)
or S (video call).
Tip
•If more than one phone number is registered for the
entry, highlight the desired phone number after step
1 and press D (voice call) or S (video call).
•You can also dial from the details screen of the
Contacts List. On the details screen, select the
desired phone number and press D (voice call) or
S (video call).
(M 8-d-d-4-1)
(M 8-d-d-4-4)
54 Contacts Manager
Dialling a Service Phone Number
Certain SIM cards contain service phone numbers that
can be dialled. Contact your SIM card vendor for more
information. On the Contacts screen, “Service Dialling
No.” is displayed at the bottom of the list.
“Contacts Manager”
→
“Services” tab
→
“Service
Dialling Numbers”
1. Select the desired service phone number.
Tip
•You can also display service phone numbers in the
following procedure:
“Telephony”
→
“Call” tab
→
“Service Dialling
Numbers”
•If the SIM card contains only one service phone
number, you can dial it in step 1 by pressing B.
•If no service phone number is stored in the SIM card,
this menu is not displayed.
Sending a Message from the
Contacts List
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
Tip
•You can also display the Contacts List in the
following procedure:
“Telephony” → “Call” tab → “Contacts List”
1. Select the desired entry including the phone number
or Email address you wish to use.
2. Highlight the desired phone number or Email
address.
3. Press [Options] and select “Create Message”.
4. Select the desired type of messaging.
For further procedures, see “Creating a New Message”
on page 82.
(M 8-d-4)
Contacts Manager 55
Sending a Voice Clip Message or Video
Clip Message Using an Address from the
Contacts List
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
1. Select the desired entry including the phone number
or Email address you wish to use.
2. Highlight the desired phone number or Email
address.
3. Press [Options] and select “Create Message”.
4. Select “Voice Message” or “Video Message”.
For further procedures, see “Creating a New
Message” on page 82.
Using Mailing Lists
You can create a mailing list to send the same message
to a group of recipients at once. Up to 5 groups can be
registered.
To Create a New Mailing List
“Contacts Manager”
→
“Settings” tab
→
“Manage
Groups”
→
“Add New Group”
1. Enter the group name.
The new group name is displayed following the last
group on the Group List screen.
To Add Recipients to a Group
Up to 20 recipients can be registered in each list.
“Contacts Manager”
→
“Settings” tab
→
“Manage
Groups”
1. Highlight the desired group name.
2. Press [Options] and select “View”.
3. Select “Assign New Entry”.
4. Select the desired entry.
The detailed screen is displayed.
5. Select the desired phone number or Email address.
(M 8-d-d-1)
56 Contacts Manager
Tip
•If you modify the entry assigned in the group, you
need to re-assign it to the group. Highlight the entry,
press [Options], then select “Re-assign Entry” in
step 3.
•To remove an entry from the group, highlight the
entry, press [Options], then select “Remove Entry”
in step 3.
•To remove a group, highlight a group name and
press [Options] and then select “Delete” in step 2.
To Send a Message Using a Mailing List
“Contacts Manager”
→
“Settings” tab
→
“Manage
Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
3. Select the desired type of messaging.
For further procedures, see “Creating a New
Message” on page 82.
Editing Contacts List Entries
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Contacts Manager 57
Adding a Thumbnail to Entries
Only Contacts saved to the handset can have
Thumbnails attached to them.
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Picture”.
4. Select “Assign Picture”.
5. Select the desired picture.
6. Press [Save] when finished.
Note
•If you delete a picture in the handset memory, the
corresponding thumbnail is also deleted.
•To store a picture right after it was taken, select
“Take Picture” in step 4.
Assigning a Ringtone or a Ring Video Clip to
Each Entry
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Assign Tone/Video”.
4. Select “For Voice Call”, “For Video Call” or “For
New Message”.
5. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 7.
6. Select “Preset Sounds” or “My Sounds”.
7. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone for an Incoming
Call” on page 134 or “Assigning a Ring Video Clip
for an Incoming Call” on page 135.
8. Press [Save] when finished.
58 Contacts Manager
Registering Birthday Item to Calendar
A birthday entered in a contacts list entry can be
registered to the calendar.
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
1. Highlight the desired entry.
2. Press [Options] and select “View”.
3. Press d to display the second tab.
4. Press b to highlight the birthday entry.
5. Press [Options] and select “Set Reminder”.
6. Press B.
Tip
•After registration, the data in Calendar can be
customised. For details on customising a schedule
entry, see “To Change the Settings” and etc. on
page 121.
•If the Calendar memory is full, “Set Reminder” is not
displayed in step 5.
Deleting Contacts List Entries
Deleting All Contact Entries
“Contacts Manager”
→
“Settings” tab
→
“Manage
Contacts”
→
“Delete All Entries”
1. Select from “Handset Entries”, “SIM Entries” or
“Both Entries”.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
Deleting a Contact Entry
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
(M 8-d-d-3-3)
Contacts Manager 59
Managing Contacts List
Copying Contacts List Entries between
SIM Card and Handset
“Contacts Manager”
→
“Settings” tab
→
“Manage
Contacts”
→
“Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to
SIM”.
Note
•When you insert the SIM card into your phone for the
first time and start the Contacts List application, the
confirmation screen is displayed automatically,
asking you if you wish to copy or not. The number of
Contacts List entries to be copied varies depending
on the SIM capacity.
•If the memory space is not enough to save all entries,
you cannot complete copying.
Sending a Contacts List Entry
“Contacts Manager”
→
“Contacts” tab
→
“Contacts
List”
1. Highlight the desired entry.
2. Press [Options] and select “Send Contact”.
3. Select “As Message” or “Via Bluetooth”.
For “As Message”
For details, see “MMS” on page 81.
For “Via Bluetooth”
For details, see “Using the Bluetooth Function” on
page 147.
Receiving a Contacts List Entry
When the phone receives a Contacts List entry, a
confirmation message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Contacts List.
Press [No] to reject.
Tip
•For details on entering Bluetooth wireless settings,
see “Connectivity” on page 147.
(M 8-d-d-3-1)
60 Contacts Manager
Synchronising Contacts List Entries
with those on the Internet
The data synchronisation functions are a network
service which allow you to manage your Contacts List
from the phone and also via the Internet. The data in the
SIM card will not be synchronised. Subscribe to a
synchronisation service by contacting your network
service centre.
“Contacts Manager”
→
“Services” tab
→
“Synchronise”
There are three available synchronisation modes.
Note
•If there are no active synchronisation settings
(M 8-d-3-5), these modes will not be available.
Synchronising the Contacts List
1. Select “Sync Now!” to synchronise the Contacts
List on the phone with those on the Internet server.
Full details of the rules for this method of
synchronisation can be obtained from your network
service centre or via the Internet server web page.
Backing up the Contacts List
1. Select “Backup” to save your Contacts List to the
Internet server.
This will overwrite any contacts data stored on the
server.
Restoring the Contacts List
1. Select “Restore” to retrieve the Contacts List on the
Internet server.
This will overwrite all contacts data currently stored
in the phone (SIM contacts are not affected). You
will be asked to verify the handset code before the
Restore action is performed. If an incorrect code is
entered, Restore will be terminated.
Viewing the Log
1. Select “View Log” to see the details of the last
synchronisation session.
(M 8-
d
-3)
(M 8-d-3-1)
(M 8-d-3-2)
(M 8-d-3-3)
(M 8-d-3-4)
Contacts Manager 61
Synchronisation Settings
“Contacts Manager”
→
“Services” tab
→
“Synchronise”
→
“Sync Settings”
1. Select the desired account or “Create New” to enter
the following settings.
“Profile Name”: Synchronisation profile
name (Unique name)
“Server Name”: Server address
“User ID”: User ID for authentication
“Password”: Password for authentication
“Proxy”: Selects Proxy setting for
synchronisation.
“Contacts DB Name”: Contacts List database name
on the server
Note
•Synchronisation settings may have already been
entered in your phone depending on your service
provider. You may have restrictions on viewing,
deleting, copying or modifying the settings. Contact
your service provider for details.
Manage Category
Different ringtones can be set for each category. If you
do not change a category ringtone, the ringtone
assigned in the Profiles menu is used.
“Contacts Manager”
→
“Settings” tab
→
“Manage
Category”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call”, “For Video Call” or “For
New Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “My Sounds”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone for an Incoming
Call” on page 134 or “Assigning a Ring Video Clip
for an Incoming Call” on page 135.
(M 8-d-3-5) (M 8-
d
-
d
-2)
62 Contacts Manager
Editing the Category Name
You can edit category names to be assigned to the
Contacts List entries.
“Contacts Manager”
→
“Settings” tab
→
“Manage
Category”
1. Highlight the desired category name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
Speed Dial List
You can set a maximum of 8 phone numbers in the
Speed Dial list (p. 36).
Setting Contacts List Entries in the Speed Dial
List
“Contacts Manager”
→
“Services” tab
→
“Speed
Dial List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Assign”.
4. Select the desired location.
Tip
•The nine digit keys (G - O) correspond to Speed
Dial list numbers.
•When the list is empty, select “Assign” in step 1.
To Edit the Speed Dial List
“Contacts Manager”
→
“Services” tab
→
“Speed
Dial List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Re-Assign” (or
“Assign”).
Memory Status
This function helps you to check the memory used in
the Contacts List.
“Contacts Manager”
→
“Settings” tab
→
“Manage
Contacts”
→
“Memory Status”
(M 8-d-2)
(M 8-
d
-2)
(M 8-
d
-
d
-3-2)
![](/img.php?id=824512&img=bg40.png)
Multimedia 63
Multimedia
Music Player
Music Player supports MP3, MPEG-4 and 3GPP
format sound files. You can access other menus while
listening to sound files.
Creating a New Playlist
You can create your own playlist, storing and managing
your favourite tracks and the order of tracks.
T
→
“Music”
→
“My Music”
→
“Playlists”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
Note
•To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
•You can create up to 99 playlists.
Playing Back Sound Files
T
→
“Music”
→
“My Music”
1. Select the item you wish to play back.
•“All Music”:
All sound files are displayed.
• “Artists”:
The names of all artists are displayed.
When an artist is selected, all of his or her albums
are displayed.
When an album is selected, all of the sound files
in the selected album are displayed.
• “Albums”:
The names of all albums are displayed.
When an album is selected, all of the sound files
in the selected album are displayed.
• “Playlists”:
All playlists are displayed.
When any playlist is selected, all of the sound
files in the selected playlist are displayed.
2. Select the desired sound file.
To pause playback, press B.
(M 3)
(M 3-1)
64 Multimedia
Note
•Select “My Music” to update the list of available
music tracks.
•You are asked whether or not to play sounds when the
Silent mode is activated.
•To play the last played file, select “Last Played
Music”. “Currently Playing” is displayed when a file
is being played back.
•When you receive a call, playback of the current file
is paused, and you can receive the call. After the call
ends, the paused playback resumes automatically in
the background.
Tip
•You can return to the Main menu screen while
playing back the file in the background.
•You can create your playlist by listing only the
desired files (p. 63).
•Sound files in both the handset and the memory card
are displayed in a single view.
•You can select the playback pattern in step 2. Press
[Options] and select “Playback Pattern”.
“Normal”: Plays back all files in the selected
folder once and stops playback.
“Repeat”: Continues playback of selected file
in the selected folder.
“Repeat All”: Plays back all files in the selected
folder.
“Random”: Plays back files in the selected folder
at random.
•While in the Music Player, the player can be
controlled by using the following keys:
a/b: Increases or decreases the volume.
b (press and hold): Mutes.
d: Jumps to the next file.
c: Returns to the start of the current file.
d (press and hold): Fast-forwards.
c (press and hold): Rewinds.
F: Plays back the file in the background.
The side keys are always available to change the
volume level.
Sorting Files
T
→
“Music”
→
“My Music”
→
“All Music”
1. Press [Options] and select “Sort”.
2. Select “By Title”, “By Artist”, “By Album” or
“By Genre”.
Sort results are displayed.
Multimedia 65
Adding a File to the Playlist
You can add files to a playlist by doing the following.
T
→
“Music”
→
“My Music”
→
“All Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a
playlist, see “Creating a New Playlist” on page 63.
3. Select the desired folder.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file in
the playlist and press [Options]. Then select “Delete
from Playlist”.
Note
•You can store up to 99 files in one playlist. However,
the total number of files stored on your phone cannot
exceed 350 files.
Downloading Music Files
T
→
“Music”
→
“Music Store”
The music file download site is displayed.
Note
•This service is not available with some service
providers. Please contact your service provider for
more information.
My Wishlist
You can purchase music. Tracks purchased on either
your mobile phone or PC will be available for
download on both devices. Selecting “My Wishlist”
will launch the browser, access the Wishlist page and
display the tracks you have added to the Wishlist. You
can purchase desired tracks from the list.
Video Player
Playing Back Video Clip Files
T
→
“Video”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Select the desired file.
To pause playback, press B.
To stop playback, press [Back].
Tip
•You can control the Video Player by using the
following keys:
a/b: Increases or decreases the volume.
b (press and hold): Mutes.
d: Jumps to the next file.
c: Returns to the start of the current file.
d (press and hold): Fast-forwards.
c (press and hold): Rewinds.
The side keys are always available to change the
volume level.
(M 3-1-3)
(M 3-1-4)
(M 3-2)
(M 3-2-2)
66 Multimedia
Searching a File to Be Played Back
T
→
“Video”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Press [Options] and select “Search”.
3. Enter a few letters of the title.
Search results are displayed in alphabetical order
and the matching file is highlighted. The search will
match the entered text with any part of the title.
Adding a File to the Playlist
You can add files to a playlist by doing the following.
T
→
“Video”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Highlight the file you wish to add to the playlist.
3. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a
playlist, see “Adding a New Playlist” on page 66.
4. Select the desired playlist.
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the file in
the playlist and press [Options]. Then select “Delete
from Playlist”.
Adding a New Playlist
You can create a playlist and register desired files in it.
T
→
“Video”
→
“My Videos”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
3. Press B.
Note
•To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Multimedia 67
Settings
You can select a play mode for “Playback Pattern”,
“Backlight” and “Display Size” when playing back
video clip files.
T
→
“Video”
→
“Settings”
1. Select from “Playback Pattern”, “Backlight” or
“Display Size”.
2. Select from the following:
• “Playback Pattern”
“Normal”: Plays back all files in the
selected folder once and
stops playback.
“Repeat”: Continues playback of
selected file in the selected
folder.
“Repeat All”: Plays back all files in the
selected folder.
“Random”: Plays back files in the
selected folder at random.
•“Backlight”
“Always On”: Lit while the file is played
back.
“Always Off”: Unlit while the file is played
back even if a key is pressed.
“Normal Settings”: Works with the main
backlight setting (p. 140).
• “Display Size”
“Original Size”: Displays the file in its
original size.
“Enlarge”: Displays the file in an
enlarged size.
“Full Screen”: Displays the file on the full
screen.
68 Multimedia
Downloading Video Clip Files
T
→
“Video”
→
“Get Video”
The video clip file download site is displayed.
Playing Back the Video Clip Files
To Play Back the Last File
T
→
“Video”
→
“Last Played Video”
FM Radio
You can connect to the FM Radio service.
Selecting a Radio Station
T
→
“FM Radio”
1. Press [Options] and select “Select Station”.
2. Highlight the desired radio station and press B.
Tip
•You can play back the program in the background.
Press [Options] and select “Play in Background”
while the program is played back.
•A headset radio antenna is necessary to use this
service.
Saving a Radio Station
T
→
“FM Radio”
1. Press [Options] and select “Save Station”.
2. Press [Options] and select “Assign”.
Searching for Stations
T
→
“FM Radio”
1. Press [Options] and select “Search”.
2. Select “Auto Search”.
3. Select “Search Upwards” or “Search Downwards”.
Tip
•You can scan and save the stations automatically by
selecting “Auto Scan & Save” in step 2.
•You can also select the desired station by entering the
frequency directly. Select “Enter Frequency” in step
2.
Setting FM Radio Playback
T
→
“FM Radio”
To Switch the Output
1. Press [Options] and select “Settings”.
2. Select “Sound Output”.
3. Select “Headset”, “Loudspeaker” or “Bluetooth”.
(M 3-2-3)
(M 3-2-1)
(M 3-3)
Multimedia 69
To Activate the Auto Switch Off
1. Press [Options] and select “Settings”.
2. Select “Auto switch off”.
3. Select the desired option.
To Switch between Stereo and Monaural
1. Press [Options] and select “Settings”.
2. Select “Switch to Stereo”.
To Switch the Station List
1. Press [Options] and select “Settings”.
2. Select “Switch List to”.
3. Select the desired list.
Mobile TV
You can connect to the Mobile TV service.
Note
•This service is not available with some service
providers. Please contact your service provider for
more information.
•To use Mobile TV on your phone, you need to be in
an area of 3G coverage.
•To use Mobile TV on your phone, you need to
purchase a subscription package from your operator.
Radio DJ
Radio DJ is an interactive, personalised music service
available on your mobile phone subject to your service
provider. Listen to your favourite music, discover new
music and create personal channels. You can also
personalise what you hear by rating tracks based on
your musical tastes. When you hear a track you want to
keep, you can purchase and download it. Tracks can be
downloaded and played on your mobile phone.
Note
•This service is not available with some service
providers. Please contact your service provider for
more information.
•To use Radio DJ on your mobile phone, you need to
be in an area with 3G coverage.
• To use Radio DJ on your mobile phone, you need to
purchase stream time from your service provider.
(M 1/M 3-4)
(M 3-5)
70 Multimedia
Playing Pre-defined Channels
You can play the pre-defined channels.
When trying to access Radio DJ for the first time, you
need to purchase stream time.
T
→
“Radio DJ”
→
“Radio DJ Channels”
1. Select the desired channel.
The playlist will be downloaded from the mobile
network.
2. Select the desired track you wish to play.
To stop, press [Options] and select “Stop”.
To pause, press [Options] and select “Pause”.
Tip
•The current track will always be in position 2 of the
list followed by the next track and the track after in
positions 3 and 4. The previous track will always be
in position 1 of the track listing.
•You can control the Radio DJ by using the following
keys:
d: Jumps to the next track
c: Jumps to the previous track
F: Plays the track in the background
The side keys are always available to change the
volume level.
You can return to the Main menu screen while
playing the track in the background. To access the
play screen again, press T.
•You can train your mobile phone to your own
personal tastes for radio channels. While you are
listening to a track, press [Options] and select “Like
Track” or “Dislike Track”. Selecting “Dislike
Track” skips to the next track and all tracks with
similar properties will be removed from the playlist.
Selecting “Like Track” adds more tracks with similar
properties to the playlist.
•You can add a track to your Wishlist (p. 65) for later
download/purchase. Press [Options] and select
“Add to Wish List”.
Multimedia 71
Creating a New Channel
You can create your own personal tastes channels.
T
→
“Radio DJ”
→
“My Radio DJ Channels”
→
“Create New Channel”
1. Select “Choose a genre”, “Choose a mood” or
“Choose a decade”.
2. Select the desired genre, mood or decade.
Selecting ALL will generate a playlist with all the
available genres, moods and decades.
Repeat steps 1 and 2 as necessary.
3. Press [Create].
4. Enter the channel name.
The channel name you enter is displayed in the “My
Radio DJ Channels” menu. You can play the music
in the same way as pre-defined channels (p. 70) by
selecting the channel you have created.
Tip
•You can also train your mobile phone to your own
personal tastes for personal radio channels in the
same way as pre-defined channels (p. 70).
•You can also add a track to your Wishlist for later
download/purchase in the same way as pre-defined
channels (p. 70).
Radio DJ Compilations
Subject to your service provider, Radio DJ presents
programmed collections of tracks to the customer on
mobile phone or PC. These collections will be created
by local music experts around a theme (e.g. Christmas
Hits, or the Best New Hip-Hop), be updated regularly,
and will comprise about 15 tracks (varied by country).
T
→
“Radio DJ”
→
“Radio DJ Compilations”
1. Select the desired compilation from the list.
2. Select the track you wish to play.
Tip
•You cannot train your mobile phone for Compilation
channels.
•You can also add a track to your Wishlist for later
download/purchase in the same way as pre-defined
channels (p. 70).
72 Multimedia
Account
T
→
“Radio DJ”
→
“Account”
Selecting “Account” will launch the browser and
navigate you to the Radio DJ subscription page.
My Wishlist
For details, see “My Wishlist” on page 65.
Streaming
You can play back video clip files while downloading
them from the mobile network.
You can also register the address of the Web site as a
bookmark.
T
→
“Streaming”
1. Select “Last Played Streaming”, “Enter URL”,
“Favourites” or “History Log”.
“Last Played Streaming”:
Shows the last streaming file.
“Enter URL”: Enter the desired address of the
Web site. The browser opens,
starts downloading and plays back.
“Favourites”: The address of the Web site is
registered.
“History Log”: Shows a log of the Web sites you
have accessed.
“Settings”: The backlight and display size
settings.
(M 3-5-2)
(M 3-6)
![](/img.php?id=824512&img=bg4a.png)
Camera 73
Camera
Your phone has a built-in digital camera that allows you
to take pictures and record video clips wherever you
are. This section starts with basic functions and
operational procedures to take, save and send pictures
and video clips, followed by common and unique
functions to camera and video modes.
Taking Pictures
“Camera”
1. Press B to take the picture.
The shutter sounds and the still image of the taken
picture is displayed.
2. Press [Save].
The taken picture is saved in My Items.
To cancel, press [Cancel].
To send the taken picture, press B in step 2 and
select “As Message”, “As Postcard” or “To Media
Album” from the send option. (The Postcard and
Media Album service is not available with some
service providers. Contact your service provider for
more information.)
Note
•When the video camera is launched, press [Options]
and select “Go to Photo Camera”, or press c.
•When you try to send a picture that has too large a
file size, the picture size is resized for the message.
The original sized picture is saved in My Items.
Tip
•You can activate the camera by pressing and holding
X in standby. Simply press X to take pictures,
and start and stop recording.
•You can lock the focus by pressing F or pressing
X halfway before taking a picture or recording a
video clip.
(M 4)
![](/img.php?id=824512&img=bg4b.png)
74 Camera
Recording Video Clips
You can record a video clip with your phone.
“Camera”
The preview is displayed on the screen.
When in photo camera mode, press d to switch to
video camera mode.
1. Press B.
2. To stop recording, press B.
3. Select “Save”.
The video clip is saved in My Items.
To view the preview before saving, select
“Preview”.
To send the video clip, select “Save and Send”.
Then select “As Message” or “To Media Album”.
(The Media Album service is not available with
some service providers. Contact your service
provider for more information.)
For further procedures, see “Creating a New
Message” on page 82.
Note
•You can only send video clips when “For Message”
is selected for the recording time. For details, see
“Selecting the Recording Time and Picture Size” on
page 80.
Common Functions in the Photo and
Video Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. Press a or b.
Once the phone has returned to standby, the zoom
settings return to default.
Adjusting the Exposure
“Camera”
→
[Options]
→
“Exposure”
1. Press a (Bright) or b (Dark).
: (Bright → Normal → Dark)
Once the phone has returned to standby, the brightness
settings return to default.
![](/img.php?id=824512&img=bg4c.png)
Camera 75
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera”
→
[Options]
→
“Picture Quality”
“Camera”
→
[Options]
→
“Video Quality”
1. Select the desired picture or video quality.
: Super Fine
:Fine
: Normal
Note
•The better quality you select, the larger the file size
becomes.
Using the Self-Timer
Select the appropriate option.
“Camera”
→
[Options]
→
“Modes”
→
“Self-timer”
1. Select “2 sec”, “5 sec” or “10 sec”.
“ ” is displayed on the screen when you select one
of these options.
Select “Off” to cancel the self-timer.
Switching the Focus Mode
“Camera”
→
[Options]
→
“Modes”
→
“Focus”
1. Select the desired option.
:Auto Focus
:Manual Focus
:Macro
Switching the Display Direction
You can switch the display direction between portrait
and landscape.
“Camera”
→
[Options]
→
“Settings”
→
“Portrait /
Landscape”
76 Camera
Selecting the Storage Memory
Select the appropriate option.
“Camera”
→
[Options]
→
“Settings”
→
“Save New
Pictures”
“Camera”
→
[Options]
→
“Settings”
→
“Save New
Videos”
1. Select the desired location from “To Handset
Memory”, “To Memory Card” or “Choose bef.
Saving”.
Note
•If you select “Choose bef. Saving”, select the desired
location every time you save.
Auto Save
You can set the phone to save pictures and video clips
automatically.
“Camera”
→
[Options]
→
“Settings”
→
“Auto Save”
1. Select “On” or “Off”.
Selecting the Anti-flicker Mode
“Camera”
→
[Options]
→
“Settings”
→
“Anti-
flicker”
1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.
Note
•Vertical stripes may occur on the picture due to the
light source. Change the anti-flicker mode to rectify.
Switching between the Photo and Video
Camera Modes
You can switch between the photo and video camera
modes by pressing c or d.
Select the appropriate option.
“Camera”
→
[Options]
→
“Go to Video Camera”
“Camera”
→
[Options]
→
“Go to Photo Camera”
Using the Help Function
“Camera”
→
[Options]
→
“Help”
![](/img.php?id=824512&img=bg4e.png)
Camera 77
Common Shortcut Keys
If multiple options exist, they switch each time you
press each following key.
Note
•The “Switches the display modes” option is available
in “Preview” before you save a video clip. See
“Recording Video Clips” on page 74.
Functions in Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures
are saved in the JPEG format.
“Camera”
→
[Options]
→
“Picture Size”
1. Select the desired size.
(External Camera) 1200 × 1600 dots/
960 × 1280 dots/
768 × 1024 dots/480 × 640 dots/
240 × 320 dots/120 × 160 dots
(Internal Camera) 240 × 320 dots/120 × 160 dots
Photo Camera Video Camera
DFocus Lock
GZoom Max/Min
HExposure
IFocus
JSave New Pictures Save New Videos
KPicture Size Picture Size
L
MPicture Quality Video Quality
NSelf-timer
O
QSwitches Viewfinder
between with and
without indicators
Switches the display
modes in the Preview
screen
PSwitches between internal and external cameras
![](/img.php?id=824512&img=bg4f.png)
78 Camera
Continuous Shoot
There are various modes for taking continuous shots.
“Camera”
→
[Options]
→
“Modes”
→
“Continuous
Shoot”
1. Select the desired mode.
The following continuous shoot modes are
available:
“Off”: The continuous shoots are
cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures
continuously.
After selecting this mode,
select from “Fast”,
“Normal”, “Slow” or
“Manual”.
“Overlapped” ( ): Overlaps continuous
pictures into one picture and
makes an afterimage.
After selecting this mode,
select “Fast” or “Normal”.
Note
•When you select “Manual” to take continuous
pictures, press B manually at the desired speed.
•When the Timer and Continuous Shoot functions are
simultaneously set, “ ” and “ ” (for “4
Pictures”, for example) are alternately displayed.
•You cannot use the Continuous Shoot function for
picture sizes larger than 480
×
640 dots. “9
Pictures” and “Overlapped” are not available for
picture sizes larger than 240
×
320 dots.
Camera 79
Selecting a Frame
You can select the frame from preset patterns or My
Pictures.
“Camera”
→
[Options]
→
“Modes”
→
“Add Frame”
1. Select “Preset Frames” or “My Pictures”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press B.
Note
•Images larger than 240 dots [W]
×
320 dots [H]
cannot be used.
Using the Full Screen
You can display the preview on the full screen without
the soft key area and indicator area.
“Camera”
→
[Options]
→
“Settings”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal
Viewfinder”.
Selecting the Shutter Sound
“Camera”
→
[Options]
→
“Settings”
→
“Shutter
Sound”
1. Select the desired shutter sound from 3 preset
patterns.
To play back the shutter sound, press [Play] in step
1.
Note
•Continuous Shoot uses the specialised shutter sound
that cannot be changed using the above settings.
•The shutter sound remains active even when
“General Volume” (p. 133) is set to “Silent” to
prevent unauthorised use.
![](/img.php?id=824512&img=bg51.png)
80 Camera
Functions in Video Camera Mode
Selecting the Recording Time and Picture Size
“Camera”
→
[Options]
→
“Record Time/Size”
1. Select “For Message” or “Extended Video”.
For Message ( ): Limits the size to send a
message depending on
service providers.
Extended Video ( ): Less than 30 minutes
(depending on the
memory).
2. Select the desired picture size.
If “For Message” is selected, select “Large (QCIF)”
or “Small (SubQCIF)”.
If “Extended Video” is selected, select “Large
(QCIF)” or “Small (SubQCIF)”. When using the
external camera, “QVGA (3gp)” is also available.
Note
•If you select “For Message” for the recording time,
the file size is limited depending on the service
provider. Therefore, the quality is also limited for the
setting.
•“Save and Send” is not displayed after recording in
the Extended Video mode.
Recording Video Clips with Sound
To record a video clip with sound, the microphone
needs to be activated.
“Camera”
→
[Options]
→
“Settings”
→
“Microphone”
1. Select “On” or “Off”.
Note
•The microphone is already turned on in the default
setting. Select “Off” to record a video clip without
the sound.
•The file size of a video clip can be reduced if the
sound is not recorded.
Video Encoding
“Camera”
→
[Options]
→
“Settings”
→
“Video
Encode”
1. Select the appropriate format.
![](/img.php?id=824512&img=bg52.png)
Messaging 81
Messaging
Your phone allows you to send and receive text,
multimedia and Email. It is compatible with most POP3
Email providers.
SMS
SMS allows you to send text messages up to
765 characters long. If you send a message of more than
160 characters, it is split into several segments.
MMS
With MMS, you can send images, sound or video to
brighten someone’s day. Messages of up to 300 KB
with images, sound, or video clips can be sent and
received.
Email
Email allows you to send messages of up to 300 KB.
Note
•Some MMS functions may not always be available
depending on your network. Contact your service
provider for more information.
•Maximum message size varies depending on the
restrictions set by the service provider.
1. Recipient field
2. Subject field
3. Message field
(M 5)
1
2
3
82 Messaging
Creating a New Message
(SMS/MMS)
“Messaging”
→
“Create Message”
→
“Message”
(Email)
“Messaging”
→
“Create Message”
→
“Email”
1. Select the recipient field.
2. Select the desired method to enter the recipient’s
details.
3. For MMS, enter or select the Email address or
phone number from the Contacts List. For SMS,
enter or select a phone number. For Email, enter or
select an Email address.
• To add multiple Email addresses or phone
numbers, highlight the recipient field, press
[Options], select “Edit Recipient”, and then
select “Add Contact”. Enter or select the Email
address or phone number from the existing
Contacts List.
• To change the recipient types, press [Options],
select “Edit Recipients” and highlight the desired
recipient. Press [Options] and select “Change to
To”, “Change to Cc” or “Change to Bcc”.
• To add a subject, highlight the subject field and
press B. Then enter the subject in the subject
entry screen and press B.
4. Place the cursor in the message field.
5. Press B to display the message entry screen.
Enter the message and press B.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
After the message is sent, the message is moved to
the Sent box.
Note
•When you create an SMS/MMS message, the mode is
automatically switched to MMS in the following
cases:
•When “Enter Email Address” in [Options] is
selected for recipient fields.
•When a subject is entered.
•When the size of entered text has exceeded the SMS
size limit.
Tip
•To send the same message to a group of recipients,
select “Select Group” in step 2, then select the
desired group name. For details on creating a
mailing list, see “To Create a New Mailing List” on
page 55.
(M 5-1)
Messaging 83
To Add a Slide Show
1. Perform steps 1 to 5 in “Creating a New Message”
on page 82.
2. Press a to highlight your message or other inserted
item such as a picture or sound file.
3. Press [Options] and select “Add Slide”.
4. Select “Add Slide After” or “Add Slide Before”.
5. Enter another message.
If you wish to set the duration of each slide,
highlight the space between the slides. Press
[Options] and select “Slide Duration”, then select
the desired duration. Repeat steps 2 to 4 to add more
slides.
Tip
•You can create messages up to 300 KB. Each slide
can contain one picture and/or one sound file or
video clip.
To Attach Data
1. In step 6 in “Creating a New Message” on page 82,
press [Options] and select “Insert Item”.
2. Select “Picture”, “Sound”, “Video”, “Attach
Contact”, “Attach Appointment” or “Others”.
When selecting “Attach Contact” or “Attach
Appointment”, go to step 4.
3. Select the desired option and then select the desired
file.
If you wish to attach pictures, sounds or video clips
that are saved, select “Saved Picture”, “Saved
Sound” or “Saved Video”.
If you wish to take new pictures, record sounds or
video clips, select “Take Picture”, “Record Voice”
or “Record Video”.
84 Messaging
4. Select the desired data.
If you wish to select your own Contacts List entry,
select “My Contact Details”.
When attaching an appointment, select the desired
day including a schedule entry you wish to add and
select the desired schedule entry.
Note
•When attaching JPEG files, select the appropriate
resize option, as the maximum message size for
sending varies depending on the service provider.
To Remove or Replace Attachments
1. In step 6 in “Creating a New Message” on page 82,
press [Options] and select the corresponding
remove option for each attachment.
Using the Sending Options
You can use the message sending options for each type
of message.
1. Highlight “Send” in the lower left of the screen,
then press B and select “Messaging Settings”.
• “Read Report” (“On”, “Off”) (MMS): Confirms
whether or not a report is sent notifying the
sender that the message has been read.
• “Delivery Report” (“On”, “Off”) (SMS/MMS):
Enables or disables Delivery Report when the
message is successfully sent to the recipient.
• “Expiry Time” (“Maximum”, “30 minutes”, “1
hour”, “6 hours”, “1 day”, “1 week”) (SMS/
MMS): Sets Expiry Time for a message to be
saved in the server.
• “Priority” (“High”, “Normal”, “Low”):
Prioritises composed messages.
• “Delivery Time” (“No delay”, “30 minutes”, “1
hour”, “6 hours”, “1 day”, “1 week”) (SMS/
MMS): Sets the time the message is delivered
after the Send key is pressed.
![](/img.php?id=824512&img=bg56.png)
Messaging 85
2. Highlight “Send” in the lower left of the screen.
Press B and select “Send Message”.
After the message is sent, the message is moved to
the Sent box.
Note
•The current message size displayed while you are
creating the message is an approximation.
•If a message cannot be sent for some reason, the
message stays in the Outbox and the “ ” is
displayed in standby.
Tip
•To save the message without sending, press
[Options] and select “Save to Drafts” in step 4 in
“Creating a New Message” on page 82.
•You can send the following items attached to
multimedia messages. Details are given in the
following sections.
•My Items data
•Contacts List entry
•Schedule entry created by Calendar, etc.
•You can use the template option to help you compose
messages. For details on using this option, see
“Using Templates” on page 49.
Sending a Message in the Drafts Box
“Messaging”
→
“Drafts”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
(M 5-3)
86 Messaging
Sending a Voice Clip Message or Video Clip
Message
You can record a new voice or video clip when creating
a new message.
Select the appropriate option.
“Messaging”
→
“Create Message”
→
“Voice Message”
“Messaging”
→
“Create Message”
→
“Video Message”
1. Press B to start recording.
2. Press B to stop recording.
3. Select “Accept” to attach to the new message.
4. Select “To Handset Memory” or “To Memory
Card” as the destination to save.
For further procedures, see “Creating a New
Message” on page 82.
Tip
•You can play back voice or video clips from My
Items.
Reading a Message
Messages you receive are saved in the Inbox.
“Messaging”
→
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Select the message you wish to view.
Storing the Phone Number of a Sender in the
Contacts List
“Messaging”
→
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message from which you wish to store
the phone number or Email address.
3. Press [Options] and select “Save Address”.
The new Contacts List entry screen including the
phone number is displayed. For details on creating
a new Contacts List entry, see “Adding a New
Contact” on page 51.
Calling the Phone Number of a Sender
Embedded in the Message
“Messaging”
→
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message containing the phone number
you wish to dial.
3. Press [Options] and select “Call”.
![](/img.php?id=824512&img=bg58.png)
Messaging 87
Downloading a Single MMS
“Messaging”
→
“Inbox”
1. Select the SMS/MMS tab.
2. Highlight the message alert ( ) you wish to
download.
3. Press [Options] and select “Download”.
Tip
•You can download multiple messages at the same
time. See “Downloading Multiple MMS”.
Downloading Multiple MMS
“Messaging”
→
“Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Multiple Select”.
3. Select the desired message alerts, press [Options]
and select “Select” or “Select All”.
4. Press [Options] and select “Download”.
The selected messages are downloaded at the same
time.
Replying to a Message or to All Addresses
“Messaging”
→
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message the sender of which you wish
to reply to.
3. Press [Options] and select “Reply” (to sender only)
or “Reply All” (to all other recipients listed in the
original To or Cc lists).
4. Select “Reply” or “Reply with History”.
5. Enter the message.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Forwarding a Message
“Messaging”
→
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message you wish to forward.
3. Press [Options] and select “Forward”.
4. Perform steps 1 to 5 in “Creating a New Message”
on page 82.
88 Messaging
Sorting the Messages in the List
“Messaging”
→
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “View Settings”.
3. Select “Sort”.
4. Select the desired sort option.
Locking or Unlocking the Messages
“Messaging”
→
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message you wish to lock or unlock.
3. Press [Options] and select “Lock/Unlock”.
Sending a Picture File with Postcard
Your phone allows you to send multimedia messages to
a Vodafone specific Postcard service centre that prints
the picture and mails it to the recipient’s home address
specified in the MMS message. (Your phone is
provided with the address of a Vodafone specific
Postcard service centre, and its address cannot be
changed.)
Note
•This service is not available with some service
providers. Please contact your service provider for
more information.
To Create a New Postcard
See the note on page 20 for menu indications.
“Messaging”
→
“Create Message”
→
“Postcard”
→
“Saved Pictures”
1. Select a picture you wish to send.
If you wish to take new pictures, select “Take
Pictures”.
If the file size of selected JPEG format pictures or
taken pictures is too large to send, select the
appropriate resize option.
2. Enter your message.
You can enter messages of up to 200 bytes.
(M 5-1-4)
Messaging 89
3. Enter or select the recipient.
See the note below for details.
• “Name” (mandatory):
Name of the recipient for a postcard up to 50
bytes
• “Additional Information” (optional):
Additional information of the recipient up to 50
bytes
• “Street & Number” (mandatory):
Street and number up to 50 bytes
• “City” (mandatory):
City up to 50 bytes
• “Postal Code” (optional):
Postal code up to 20 bytes
• “State/Province” (optional):
State, province, and region up to 50 bytes
• “Country” (optional):
Country up to 20 bytes
4. Press [Options] and select “Send Postcard”.
Note
•The items “Name”, “Street & Number” and “City”
are necessary to complete sending Postcards.
•The items displayed differ according to the service.
Please contact your service provider for more
information. The item “Country” may not be
displayed, in which case you cannot send Postcards
overseas from your phone.
•Asterisks entered in the address become invalid when
the message is sent, and spaces cannot be entered in
the Postal Code.
•Only files in JPEG format can be used for the
Postcard service.
•The picture quality of Postcards varies depending on
the picture size.
![](/img.php?id=824512&img=bg5b.png)
90 Messaging
Instant Messenger
With Vodafone Messenger you can stay in touch and
have fun with friends through instant messaging. You
will know when your friends are available to chat and
that they immediately receive your instant messages.
When you first start using Vodafone Messenger, all you
need to know is your friend’s mobile number or
messenger ID to build your Vodafone Messenger
contact list.
Note
•The name for this service varies depending on the
region. Also, the service is split into two types, an
Instant Messenger version and a Web version. The
Instant Messenger version is described here. If your
phone does not access the Instant Messenger version
as described here, you will connect to the Web
version. To find out which service you are using,
please contact your service provider.
1st Sign in
“Messaging”
→
“Instant Messenger”
1. Enter your screen name and press B.
Your phone is connected to Instant Messenger
server.
2. Select one of the following methods to add
members to your contact list.
“Enter Phone Number”:
Enters the contact’s phone number.
“Enter Messenger ID”:
Enters the contact’s messenger ID.
Enter from your Contacts List:
Selects members from your Contacts List.
3. Enter the display name and press B.
Tip
•You can change the screen name and display name at
any time.
•If the necessary settings for Instant Messenger are
not entered, the settings screen is displayed (p. 99).
(M 5-6)
Messaging 91
Starting a Conversation
“Messaging”
→
“Instant Messenger”
→
“Online
Contacts” tab or “Group Conversations” tab
1. Select the display name or the group name you wish
to send the message to.
The conversation dialogue opens.
2. Enter the message in the lower window and press B.
When the message is sent, the message moves to the
upper window.
3. When you receive a message, it is displayed in the
upper window.
4. To continue the conversation, repeat steps 2 and 3.
Note
•You can enter up to 160 characters in each message
that is sent.
•You can send messages even if the recipient is not
connected.
Tip
•You can move the cursor by a/b.
When the cursor is at the top of the lower window, a
moves control to the upper window then a/ b
scrolls the text in the upper window. To return to the
lower window, press [Back].
•The number of lines in the upper and lower windows
changes to suit the circumstances.
Adding a New Contact
“Messaging”
→
“Instant Messenger”
→
“Registered
Contacts” tab or “Online Contacts” tab
1. Press [Options] and select “Add New Contact”.
2. Enter the new Contacts List member by steps 2 and
3 in “1st Sign in” on page 90.
Adding a Group of Contacts
“Messaging”
→
“Instant Messenger”
→
“Group
Conversations” tab
1. Press [Options] and select “Add New Group”.
2. Enter the group name and press B.
The Online Contacts list opens.
3. Highlight each member you wish to add to the
group and press B to check.
To uncheck, press B once.
4. Press [Save].
92 Messaging
Adding Members to a Group of Contacts
“Messaging”
→
“Instant Messenger”
→
“Group
Conversations” tab
1. Highlight the group you wish to add the members
to.
2. Press [Options] and select “Invite Contacts”.
The Online Contacts list opens.
3. Select the members by steps 3 and 4 in “Adding a
Group of Contacts” on page 91.
Reading a Message
“Messaging”
→
“Instant Messenger”
→
“Conversations” tab
1. Select the desired message you wish to read.
Tip
•You can continue a conversation after you have
received a message by entering a message in the
lower window.
Saving a Conversation
“Messaging”
→
“Instant Messenger”
→
“Conversations” tab
1. Highlight the conversation you wish to save.
2. Press [Options] and select “Save Conversation”.
Note
•You can save up to 3900 bytes (approx. 100 lines) in
a conversation. When this limit is exceeded,
messages are automatically deleted starting from the
oldest message.
•You can save up to ten conversations. When this limit
is exceeded, you will be asked to delete old
conversations starting from the oldest message.
•You can view saved conversations as follows:
Reading a Saved Conversation
“Messaging”
→
“Instant Messenger”
→
“Conversations” tab
1. Press [Options] and select “Saved Conversations”.
2. Select the conversation you wish to read.
Messaging 93
Watchers List
The watchers list allows you to see who is viewing your
status.
To Add Contacts from the Watchers List
You can add the watchers to the Contacts List using any
tab.
“Messaging”
→
“Instant Messenger”
1. Press [Options] and select “Settings”.
2. Select “Watchers List”.
The Watchers List opens.
3. Press [Options] and select “Add to Contacts”.
Tip
•To block a member from viewing your status,
highlight the member you wish to block, press
[Options] and select “Block User”.
Client Settings
You can set these options using any tab.
“Messaging”
→
“Instant Messenger”
1. Press [Options] and select “Settings”.
2. Select one of the following items.
“My Status”: Changes your connection
status to “Online” or
“Busy”.
“Screen Name”: Changes your screen
name.
“Automatic Sign In”: Sets whether or not to sign
in when you turn your
phone on.
“Block List”: Views and removes
contacts from the Block
List.
Sign Out
You can log out using any tab.
1. Press [Options] and select “Sign Out”.
Note
•Be sure to disconnect when signing out. Otherwise,
you will be charged for data.
94 Messaging
Cell Broadcasts
You can receive cell broadcast messages or general
messages such as weather forecasts and traffic reports.
This information is broadcast to subscribers in certain
network areas.
This function may not be available on all mobile phone
networks. Contact your service provider for more
information.
Enabling/Disabling Cell Broadcasts
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Cell Broadcasts”
→
“Switch On/Off”
1. Select “On” or “Off”.
Reading Cell Broadcast Messages
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Cell Broadcasts”
→
“Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press [Back].
Setting Languages for Cell Broadcast
Messages
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Cell Broadcasts”
→
“Settings”
→
“Language”
The current language is displayed.
1. Press B to check.
2. Press [Save].
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you
want.
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Cell Broadcasts”
→
“Settings”
→
“Set
Info Subjects”
1. Press [Options] and select “Add/Remove”.
2. Select the desired subject.
3. Press [Save].
Tip
•If the desired subject is not in the list that appears in
step 2, select “Create Subject” in step 1, then enter
the subject code to add a page. For details on the
subject code, contact your service provider.
(M 12-
d
-
d
-
d
-5-4)
Messaging 95
Messaging Settings
Tip
•You can also display the Messaging Settings menu in
the following procedure:
“Settings” → “Other Settings” tab → “Message
Settings”
General Settings
“Messaging”
→
“Messaging Settings”
→
“General Settings”
1. Select the item you wish to set up.
• “Auto Delete”:
Deletes the oldest message automatically, when
the Inbox, Sent or Both (Inbox and Sent) is full.
• “Message List View”:
Switches the mailbox listing (“Two-line”, “One-
line”).
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit”
to edit current signature.
• “Message Type”:
Sets the type of message to send by default when
a message is composed. When set to “Free”, the
message is sent automatically either as an SMS or
MMS as appropriate.
SMS Settings
“Messaging”
→
“Messaging Settings”
→
“SMS Settings”
1. Select the item you wish to set up.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit”
to edit current signature.
• “Auto Resend”:
Tries to resend the failed SMS/MMS message up
to two times (“On” or “Off” selection).
• “Expiry Time”:
This indicates the number of days and hours for
which a message you send may remain
undelivered to the message recipient. During this
period, the message service centre will
continually try to deliver the message to the
recipient.
(M 5-10)
(M 5-10-1)
(M 5-10-2)
96 Messaging
• “Message Centre”:
Enter the message centre number. Up to 3
numbers can be registered.
If you wish to enter a country code for a message
to an international number, press and hold Q
until a + sign is displayed.
• “Message Format”:
Sets the message format to be used when creating
a new message.
•“Reply Path”:
Enables or disables adding a reply path to the
message.
• “Optimisation”:
When set “On” (default), double-byte characters
such as European characters with an accent are
converted into single-byte characters and sent.
When “Off”, double-byte characters are sent as
displayed.
Please note that you may be charged double for
double-byte characters sent in an SMS when
Optimisation is set “Off”.
• “Connection Type”:
Sets the preferred connection type (“GPRS
Preferred”, “CSD Preferred”).
MMS Settings
“Messaging”
→
“Messaging Settings”
→
“MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New”
to enter the following settings.
“Profile Name”: MMS profile name
(Unique name)
“Proxy”: Proxy setting for MMS
“Relay Server URL”: MMS relay server
• “Home Download”:
Controls the message download timing inside
your network area.
“Always Download”: Downloads messages
immediately from the
server.
“Always Defer”: Defers message download.
(M 5-10-3)
Messaging 97
• “Roam Download”:
Controls the message download timing when
roaming outside of your network.
“Always Download”: Downloads messages
immediately from the
server.
“Always Defer”: Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit”
to edit current signature.
• “Auto Resend”:
Tries to resend the failed SMS/MMS message up
to two times (“On” or “Off” selection).
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying
the sender when you receive a message.
• “Read Report”:
Enables or disables Read Report request.
• “Read Report Allow”:
Enables or disables Read Report Allow when the
recipient is required to inform the sender that the
message has been read.
• “Expiry Time”:
This indicates the number of days and hours for
which a message you send may remain
undelivered to the message recipient. During this
period, the message service centre will
continually try to deliver the message to the
recipient.
• “Slide Duration”:
Sets the duration of the slide.
• “Slide Auto Play”:
Enables or disables Slide Auto Play.
• “Send file Settings”:
Sets whether or not to send and save the file
settings.
98 Messaging
• “Max Message Size”:
Sets the maximum message size for sending and
disables sending MMS messages exceeding that
size.
• “Creation Mode”:
When set to “Free”, you can attach files of any
format to the mail. When set to “Restricted”, only
certain formats and message sizes can be
attached. The “Restricted” setting has priority
over “Max Message Size”.
• “Emoticons”:
Enables or disables the Emoticons when entering
text.
• “Hide Number”:
Sets whether to show or hide the sender’s
address.
• “Delivery Time” (“Immediate”, “1 hour”, “12
hours”, “1 day”, “1 week”): Sets the time the
message is delivered after the Send key is
pressed.
• “Automatic Rejection”:
Enables or disables the Automatic Rejection of
messages from anonymous senders.
Email Settings
“Messaging”
→
“Messaging Settings”
→
“Email Settings”
To Set an Email Account
1. Select “Email Accounts” and highlight the preset
Email account.
You can also create a new account.
2. Press [Options] and select “Edit”.
3. Select the item you wish to set up.
“Account Name”: Email account name
(Unique name)
“Incoming Server”: Server name, user ID,
password, port number,
APOP authentication and
encryption for the incoming
server
(M 5-10-4)
Messaging 99
“Outgoing Server”: Server name, user ID,
password, port number,
SMTP authentication and
encryption for the outgoing
server
“Access Point”: Access point for Email
“Email Address”: Email address
“Advanced Settings”: Your name, signature,
download interval,
download configuration,
maximum download limit,
saved sent messages
Messenger Settings
With service providers not offering the Instant
Messenger function, the “Messenger Settings” menu is
not displayed.
“Messaging”
→
“Messaging Settings”
→
“Messenger Settings”
1. Select “Create New” to enter the following settings.
“Profile Name”: Messenger profile name
(Unique name)
“Proxy”: Proxy setting for Messenger
“URL”: Messenger relay server
“Messenger ID”: Your ID for Messenger
“Password”: Password for Messenger
Note
•In normal operations, you do not need to change the
settings.
•Messenger settings have already been entered in
your phone depending on your service provider. You
may have restrictions on viewing, deleting, copying
or modifying the settings. Contact your service
provider for details.
(M 5-10-5)
![](/img.php?id=824512&img=bg65.png)
100 Vodafone live!
Vodafone live!
Your phone is already configured to access Vodafone
live! and the mobile internet*.
Vodafone live! is a whole world of information and
entertainment on your phone.
Vodafone live! with 3G takes mobile media to a
completely new level. It brings your mobile to life –
you can download and listen to full music tracks, play
3D games plus loads more, so you are always up to date
with what matters to you or have the latest ways to
entertain yourself when you’re out and about! All this
at a faster speed and in crystal-clear digital quality.
* If you have problems getting connected, please
phone Vodafone Customer Support.
Main Menu
“Vodafone live!”
→
“Vodafone live!”
The Vodafone live! service page is displayed.
“Vodafone live!”
→
“Enter URL”
The URL entry screen is displayed. You can type in the
URL of a site directly.
“Vodafone live!”
→
“Bookmarks”
See page 101.
“Vodafone live!”
→
“Alert Inbox”
WAP Push alerts are displayed.
“Vodafone live!”
→
“Saved Page”
You can view all the screenshots that have been saved
onto the handset memory.
“Vodafone live!”
→
“Access History”
The history of pages you have recently browsed is
displayed.
“Vodafone live!”
→
“Browser Settings”
See page 102.
(M 2)
Vodafone live! 101
Navigating a WAP Page
•a b c d:
Moves the highlight around in the screen.
•A: Launches the option menu if it has not
been launched.
Used to select an option from the option
menu.
•B: Executes the highlighted item in the
screen.
•C: Launches “Vodafone live!” by opening
the browser when in standby.
Moves to previous page when the browser
is active.
•F(short press):
Exits the browser.
(press and hold):
Turns off the phone.
Editing Bookmarks
“Vodafone live!”
→
“Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following
options:
(When a bookmark is focused)
“Open”: Selects a bookmark.
“Edit”: Edits URL address of the
bookmark.
“Add New Bookmark”:
Creates new bookmarks.
“Create Folder”: Creates new folders.
“Send via MMS”: Sends the URL address to
recipients.
“Move”: Moves bookmarks to
another location.
“Details”: Displays detailed
information of the WAP
page.
“Delete”: Deletes bookmarks.
“Delete All”: Deletes all bookmarks.
(M 2-3)
102 Vodafone live!
(When a folder is focused)
“Select”: Selects the folder.
“Add New Bookmark”:
Creates new bookmarks.
“Create Folder”: Creates new folders.
“Move”: Moves folder and
bookmarks in the folder to
another location.
“Rename Folder”: Renames the folder.
“Delete Folder”: Deletes the folder and
bookmarks in the folder.
“Delete All”: Deletes all folders and
bookmarks.
(When there are no bookmarks)
“Add New Bookmark”:
Creates new bookmarks.
“Create New Folder”: Creates new folders.
Browser Settings
“Vodafone live!”
→
“Browser Settings”
“Font Size”: Sets the size of the browsing
font.
“Scroll Step”: Sets the speed of scrolling.
“Character Encode”: Sets the character encoding
scheme.
“Send Referrer”: Enables or disables the
notification of the referrer.
“Cookies”: Adjusts the setting of
cookies.
“Downloads”: Sets whether or not to show
images when accessing the
WAP/web page.
“Security”: Adjusts the security prompt
level.
“WAP Push”: Sets whether you need
confirmation for push
message.
“Download to”: Sets the download location.
(M 2-7)
Vodafone live! 103
The Browser Options
You can use the various options of the browser.
C
→
[Options]
“Select”: Selects a WAP page.
“Open This Frame”: Opens the selected frame.
(This option is displayed
only when a frame page is
displayed.)
“Home”: Goes to the homepage.
“Forward”: Goes to the next page of the
pages displayed.
“Reload Page”: Reloads the WAP page
again to get new
information.
“Bookmarks”: See page 101.
“Save This Page”: Allows you to save the
currently viewed browser
screenshots to the handset
memory.
“Save Items”: Saves items from the
browser pages.
“Enter URL”: Allows you to type in the
URL of a site directly.
Handset browser will go to
the web/WAP page that you
entered.
“Access History”: Shows the history where
you have browsed.
“Complete Page Display”:
Allows the browser to
display in complete page
mode or Virtual Screen
mode.
“Advanced”: Displays the advanced
option menu of the browser.
“Help”: Displays the browser help.
“Exit”: Exits the browser.
Tip
•You can also display browser options in the following
procedure:
“Settings”
→
“Other Settings” tab
→
“Browser
Settings”
104 Vodafone live!
The Advanced Options
C
→
[Options]
→
“Advanced”
“Zoom In/Out”: Zooms in on or out from the
WAP page. This option is
available only when
“Complete Page Display” is
set to “ON”.
“Send This Page via MMS”:
Sends the WAP/web page
via MMS.
“Details”: Shows detailed information
of the WAP/web page.
“Delete Browser Data”:
Deletes the browser data.
You can clear the cache/
cookies/history/
authentication information.
“Search This Page”: Searches for specific words
in the WAP/web page.
“Jump to Top”: Jumps to the top of the
WAP/web page.
“Jump to Bottom”: Jumps to the bottom of the
WAP/web page.
“Copy Text”: Copies the text on the WAP/
web page.
“Browser Settings”: Displays the settings menus
(p. 102).
![](/img.php?id=824512&img=bg6a.png)
My Items 105
My Items
My Items contains all your pictures, music and videos.
Also included in My Items are Text Templates and
recently viewed WAP page addresses. You can also
transmit pictures, sounds and video clips via Bluetooth
wireless technology to other Bluetooth-enabled
devices.
Pictures
Pictures that are taken by your phone’s camera or
images that are downloaded from mobile Internet sites
can be viewed, edited and organised.
Viewing Pictures
“My Items”
→
“Pictures”
1. Select the file you wish to view.
The selected picture is displayed.
Note
•To switch between viewing handset or memory card
content, select the first item in the options menu.
Tip
•You can scroll through your pictures with P and
R.
•To change the default view of pictures (list or grid),
press [Options], select “Manage Items” and then
select “Change List View”.
Using Images as Wallpaper
“My Items”
→
“Pictures”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Editing Pictures
“My Items”
→
“Pictures”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Edit”.
3. Select “Picture Editor” or “Composite”.
4. Select the desired option.
Note
•“Picture Editor” may not be available depending on
the original picture and copyright issued.
(M 6)
(M 6-1)
106 My Items
Saving an Image to Contacts List Entries
You can use this option only for pictures saved in the
handset memory.
“My Items”
→
“Pictures”
1. Highlight the file you wish to add to Contacts List.
2. Press [Options] and select “Add to Contacts”.
To overwrite, select the data you wish to save.
To save as a new entry, select “As New Contact”.
For details on entering a name, see “Adding a New
Contact” on page 51.
Downloading Picture Files
“My Items”
→
“Pictures”
→
“More Pictures”
The picture file download site is displayed.
Music & Ringtones
The downloaded sound files and the AMR data
recorded by Voice Recorder are managed in Music &
Ringtones. The default ringtones are not contained
within Music & Ringtones. Only the sound files that
can be played back on the phone are stored in Music &
Ringtones.
Playing Back Sound Files
“My Items”
→
“Music & Ringtones”
1. Select the file you wish to play back.
To stop playback, press [Back].
Note
•Playback may not be available for some sound files.
•To switch between viewing handset or memory card
content, select the first item in the options menu.
Using the Sound Files as a Ringtone
“My Items”
→
“Music & Ringtones”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
Tip
•For other option menus, see “Common Option
Menus” on page 110.
(M 6-2)
My Items 107
Downloading Sound Files
“My Items”
→
“Music & Ringtones”
→
“More
Ringtones”
The sound file download site is displayed.
Videos
Video clips that are recorded by your phone’s video
camera or video clips that are downloaded from mobile
Internet sites can be viewed and organised.
Playing Back Video Clip Files
“My Items”
→
“Videos”
1. Select the file you wish to play back.
To pause playback, press B.
To resume, press B again.
To stop playback, press [Back].
Note
•To switch between viewing handset or memory card
content, select the first item in the options menu.
Using a Video Clip as a Ring Video Clip
You can set your video clip to play back when the
phone rings.
“My Items”
→
“Videos”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Tip
•For other option menus, see “Common Option
Menus” on page 110.
Downloading Video Clip Files
“My Items”
→
“Videos”
→
“More Videos”
The video clip file download site is displayed.
(M 6-3)
108 My Items
Themes
You can easily customise the display by using the
theme files.
Viewing Previews
“My Items”
→
“Themes”
1. Highlight the theme file you wish to preview.
2. Press B.
The selected theme file is displayed.
Note
•To switch between viewing handset or memory card
content, select the first item in the options menu.
Setting Theme
“My Items”
→
“Themes”
1. Select the desired theme file.
The selected theme file is set as the default theme.
Tip
•Even after a theme is set, you can set a wallpaper
regardless of the set theme. In this case, the other
items follow the set theme.
•For other option menus, see “Common Option
Menus” on page 110.
Downloading Theme Files
“My Items”
→
“Themes”
→
“More Themes”
The theme file download site is displayed.
Games & Applications
For details on Vodafone specific applications, see
“Games & Applications” on page 114.
(M 6-4)
(M 6-5)
My Items 109
Text Templates
You can register up to 50 text templates for use in text
messages and multimedia messages. A maximum of
256 characters can be used for a single text template.
Adding Phrases to Text Templates
“My Items”
→
“Text Templates”
→
“Add New
Template”
1. Enter the text and press B.
Editing Text Templates
“My Items”
→
“Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press [Options] and
select “View”.
To delete the text template, press [Options] and
select “Delete”.
3. Modify the text and press B.
Sending Text Templates
“My Items”
→
“Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
Other Documents
Some types of files are stored in the Other Documents
folder of the phone. You can edit and use these files as
My Items data.
Opening a Document File
“My Items”
→
“Other Documents”
1. Select the desired file.
Note
•To switch between viewing handset or memory card
content, select the first item in the options menu.
Tip
•For other option menus, see “Common Option
Menus” on page 110.
(M 6-6) (M 6-7)
![](/img.php?id=824512&img=bg6f.png)
110 My Items
Common Option Menus
For using the desired file type, first select the
appropriate folder in the My Items menu. My Items
contains the following folders.
“My Items”
→
“Pictures”
“My Items”
→
“Music & Ringtones”
“My Items”
→
“Videos”
“My Items”
→
“Themes”
“My Items”
→
“Games & Applications”
“My Items”
→
“Text Templates”
“My Items”
→
“Other Documents”
Activating Files with Copyright Protection
(DRM)
Some pictures, sound files, video clips and theme files
have a digital copy protection program, which is called
DRM (Digital Rights Management). You need to
activate the digital licence permission to open the files.
Files protected with DRM are displayed with .
1. Select the appropriate folder for the desired file
type.
2. Highlight the file you wish to activate.
3. Press [Options] and select “Activate”.
Note
•Some pictures with DRM may not open even when an
attempt is made to activate it.
Sending My Items Data
For details on Bluetooth wireless technology, see
“Connectivity” on page 147.
1. Select the appropriate folder for the desired file
type.
2. Highlight the desired file.
3. Press [Options] and select “Send”.
4. Select “As Message” or “Via Bluetooth”.
Tip
•For details on creating a message, see “Creating a
New Message” on page 82.
•For details on Bluetooth settings, see “Using the
Bluetooth Function” on page 147.
My Items 111
Note
•Pictures/Sounds/Video clips protected by copyright
cannot be sent attached to a message, with the
exception of Separate Delivery files.
•Theme files can only be sent via Bluetooth. Select
“Bluetooth” in step 4.
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
•When you send a picture file, select “As Postcard” in
step 4. The Postcard service is not available with
some providers. Contact your service provider for
more information.
Receiving My Items Data
When the phone receives My Items data, a confirmation
message is displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding My
Items folder.
Tip
•For details on Bluetooth wireless settings, see
“Connectivity” on page 147.
Using My Items Data
You can copy, move, sort, rename, and delete the saved
My Items data.
1. Select the appropriate folder for the desired file type
(page 110).
2. Highlight the desired file.
3. Press [Options] and select “Manage Items”.
4. Select the desired option.
“Sort”: Sorts files. Select the desired
files to sort.
“Rename”: Renames the file or folder. Select
the desired file or folder to
rename.
“Create Folder”: Creates a new folder.
“Change List View”:
Changes the list view.
“Delete All”: Deletes files. Select the desired
files to delete.
112 My Items
Note
•“Manage Items” is not available for “Games &
Applications” and “Text Templates”.
To Delete the File
1. Select the appropriate folder for the desired file type
(page 110).
2. Highlight the desired file.
3. Press [Options] and select “Delete”.
To See the My Items Details
1. Select the appropriate folder for the desired file type
(page 110).
2. Highlight the file you wish to view the details of.
3. Press [Options] and select “Details”.
Uploading My Items Data
You can upload your picture, sound or video clip files
to the Media Album.
1. Select the appropriate folder for the desired file type
(page 110).
2. Highlight the file you wish to upload.
3. Press [Options] and select “Send”.
4. Select “To Media Album”.
Note
•This service is not available with some service
providers. Please contact your service provider for
more information.
•Picture, sound and video clip files protected with a
copyright cannot be uploaded.
My Items 113
Selecting Multiple Files
You can select more than one item from My Items for
moving, copying, managing and deleting.
Note
•The following procedure applies when entries other
than “More Pictures”/“More Ringtones”/“More
Videos”/“More Themes” are highlighted.
1. Select the appropriate folder for the desired file type
(p. 110).
2. Highlight the file you wish to select.
3. Press [Options] and select “Check”.
4. Repeat steps 2 and 3 until you select all the desired
files.
Tip
•To remove the check, highlight the file again and
select “Uncheck” in step 3.
•If you wish to unselect all, select “Manage Items” in
step 3 and select “Uncheck All”.
Memory Status
This function helps you to check the memory status of
the handset memory or memory card. Memory status
covers the following.
Phone Memory: Applications, Pictures, Videos,
Sounds, Themes, Others, Total
and Free
Memory Card: Pictures, Videos, Sounds,
Themes, Others, Total and Free
“My Items”
→
“Memory Status”
1. Select “Phone Memory” or “Memory Card”.
(M 6-8)
![](/img.php?id=824512&img=bg73.png)
114 Games & Applications
Games & Applications
Games & Applications
Using Applications
Various kinds of Vodafone specific applications can be
used on this phone. To use applications, download the
applications via the mobile Internet. Some applications
offer the ability to connect to a network either within a
game or a network-based application.
Note
•Applications may be both localised (no connectivity)
and network-based (using the mobile Internet to
update information/play games). The network may
charge you more for using network-based
applications. Please contact your service provider
for more information.
Downloading Applications
“Games & Applications”
→
“Games & Applications”
→
“More Applications”
1. Select the desired application.
Before downloading the application you are asked
to confirm what you are about to receive. After
checking the information on the confirmation
screen, the application can be downloaded.
2. Press B to start downloading.
3. Press B when finished.
Note
•User authentication may be required before
downloading the application on some information
screens.
(M 11)
(M 11-1)
Games & Applications 115
Executing Applications
“Games & Applications”
→
“Games & Applications”
1. Select the title of the application you wish to
execute.
The selected application is executed. When using
network connection type applications, connection
to the network can be selected.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Display
“Games & Applications”
→
“Games & Applications”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
Setting Permission
You can set permission for selected Java™
applications.
“Games & Applications”
→
“Games & Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”: Sets permission to make voice
calls.
“Network Access”: Sets permission to access the
network.
“Messaging”: Sets permission to perform
MMS and SMS messaging.
“Autorun”: Sets permission to perform the
Autorun function.
“Local Connection”: Sets permission to connect to
local devices.
“Read User Data”: Sets permission to read user
data, such as Contacts List
entries, mailbox (Inbox) and
My Items data.
“Write User Data”: Sets permission to write
entries in your phone, such as
Contacts List entries, mailbox
(Inbox) and My Items data.
“Use Multimedia”: Sets permission to use the
multimedia recording.
116 Games & Applications
4. Select one of the following options:
“Session”: The confirmation message is
not displayed until you exit
the application, while
execution of the API of the
specified function group is
authorised.
“Ask Once”: The confirmation message is
displayed every time the API
of the specified function
group is executed.
“Blanket”: The confirmation message is
not displayed until the
application is deleted or you
change the settings, while
execution of the API of the
specified function group is
authorised.
“No”: Execution of the API of the
specified function group is not
authorised.
Note
•To clear all the permission settings, select “Reset” in
step 3.
•Some permissions are not available for some Java™
applications.
Viewing Application Information
You can check the information of Java™ applications.
“Games & Applications”
→
“Games & Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Moving or Deleting an Application
You can move an application between Games folders
and Application folders, and also delete applications in
folders.
“Games & Applications”
→
“Games & Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Move” or “Delete”.
Games & Applications 117
Java™ Settings
Application Volume
You can set the volume of the application such as the
sound effect to one of the five levels or silent. When the
profile is set to “Silent”, the “General Volume” setting
(p. 133) has priority.
“Games & Applications”
→
“Java™ Settings”
→
“Application Volume”
1. Press a (or d) to increase the volume or press b
(or c) to decrease the volume and then press B.
Backlight
“Games & Applications”
→
“Java™ Settings”
→
“Backlight”
→
“Switch On/Off”
1. Select from “Always On”, “Always Off” or
“Normal Settings”.
“Always On”: Lit while the application is
operated.
“Always Off”: Unlit while the application is
operated even if a key is
pressed.
“Normal Settings”: Works with the main
backlight setting (p. 140).
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off”, the backlight cannot be
turned on from the application.
“Games & Applications”
→
“Java™ Settings”
→
“Backlight”
→
“Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
“Games & Applications”
→
“Java™ Settings”
→
“Vibration”
1. Select “On” or “Off”.
Tip
•You can also display browser options in the following
procedure:
“Settings”
→
“Other Settings” tab
→
“Java™
Settings”
(M 11-2)
![](/img.php?id=824512&img=bg77.png)
118 Games & Applications
Calls & Alarms
You can set the priority of incoming calls and alarms
while an application is operating.
“Games & Applications”
→
“Java™ Settings”
→
“Calls & Alarms”
1. Select “Voice Call”, “Video Call”, “Incoming
Message” or “Alarm”.
2. Select the desired method.
• “Call Priority”, “Message Priority” or “Alarm
Priority”:
The application is suspended automatically, and
you can receive a call or a message, or the alarm
will sound. After finishing the call or sending the
message, or when the alarm ends, the suspend
indicator ( ) is displayed letting you know there
is a suspended application.
• “Call Notice”, “Message Notice” or “Alarm
Notice”:
The marquee (character scrolls) is displayed on
the first line of the screen while the application
continues. If you press D, the application is
suspended, and you can receive a call. After
finishing the call or sending the message, the
suspend indicator ( ) is displayed letting you
know there is a suspended application.
Screensavers
You can download screensaver applications for the
standby screen and set the time period for the
screensaver to activate.
“Games & Applications”
→
“Java™ Settings”
→
“Screensaver”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Set the Activation Time
“Games & Applications”
→
“Java™ Settings”
→
“Screensaver”
→
“Activation Time”
1. Enter the activation time in two digits using the
keypad.
To Set the Suspend Time
“Games & Applications”
→
“Java™ Settings”
→
“Screensaver”
→
“Suspend Time”
1. Set the desired time period from “after 15 min.” to
“after 6 hours”.
Games & Applications 119
Default Settings
“Games & Applications”
→
“Java™ Settings”
→
“Set to Default”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
Clearing All Memory
“Games & Applications”
→
“Java™ Settings”
→
“Memory All Clear”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
Java™ Information
“Games & Applications”
→
“Java™ Information”
The information about the licences belonging to Java™
is displayed.
(M 11-3)
![](/img.php?id=824512&img=bg79.png)
120 Organiser & Utilities
Organiser & Utilities
Alarms
Setting the Alarms
The alarm function allows you to be alerted at a
specified time.
Note that you need to set the current date and time
before setting the alarm function if it has not been done
already.
“Organiser & Utilities”
→
“Organiser” tab
→
“Alarms”
1.
Select the blank line (--:--) you wish to set an alarm to.
2. Enter the desired time.
3. Press [Save].
To Change the Settings
1. Select the item you wish to change in the Set Alarm
screen.
• “Repeat”:
Sets the number of times the alarm sounds.
• “Assign Tone/Video”:
Assigns a tone or video clip file to the alarm.
• “Snooze”:
Sets the snooze option.
• “Alarm Volume”:
Sets the desired volume.
The alarm will not sound when “Alarm Volume”
is set to “Silent”. When the profile is set to
“Silent”, the “General Volume” setting (p. 133)
has priority.
• “Vibration”:
Sets the vibration pattern of the alarm.
For details on selecting a vibration, see
“Vibration” on page 137.
•“Duration”:
Sets the duration of the alarm.
Resetting an Alarm
“Organiser & Utilities”
→
“Organiser” tab
→
“Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarms
“Organiser & Utilities”
→
“Organiser” tab
→
“Alarms”
1. Select “Clear All”.
(M 7)
(M 7-1)
Organiser & Utilities 121
Calendar
The calendar allows you to easily schedule
appointments.
These entries can also be sent via Bluetooth wireless
technology to a PC to share the same schedules. When
you exchange entries with other devices, the date and
time displayed may be different to that of the original
data depending on the data format of the receiving
device.
Creating a New Entry
“Organiser & Utilities”
→
“Organiser” tab
→
“Calendar”
1. Select the desired day to which you want to add an
event.
2. Select “Add New Entry”.
3. Enter the subject.
4. Select the desired category.
5. Enter the start date and time.
6. Select the duration.
When selecting “Other”, enter the desired end date
and time.
7. Select the reminder time.
When selecting “Other”, enter the desired reminder
date and time.
8. Press [Save].
Note
•If the date and time settings have not been entered,
the date and time entry screen is displayed (p. 142).
•The reminder will not sound when “General
Volume” (p. 133) is set to “Silent”.
To Change the Settings
1. Select the item you wish to change in the New Entry
screen.
• “Reminder”: Sets options including
“Reminder Time”, “Assign
Tone/Video” and “Duration” for
the reminder.
• “Repeat”: Sets the number of times the
reminder sounds.
• “Location”: Sets the location for the schedule
entry.
• “Description”: Enables entering a memo for the
schedule entry.
(M 7-2)
122 Organiser & Utilities
• “Secret”: Sets to show or hide the schedule
entry. Set to “On” to make the
data secret or select “Off” to
leave it as it is.
Viewing a Schedule Entry
“Organiser & Utilities”
→
“Organiser” tab
→
“Calendar”
1. Select the day you wish to view.
2. Select the desired entry.
To Search by Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to
enter the desired date.
Tip
•In the monthly or weekly view, you can control the
view by using the following:
Monthly view
P: Displays the previous month.
R: Displays the next month.
Q: Displays the weekly view.
K: Moves the cursor to today.
c/d: Moves the cursor to left (the previous day)
or to right (the next day).
a/b: Moves the cursor upward (last week) or
downward (next week).
Weekly view
P: Displays the previous week.
R: Displays the next week.
Q: Displays the monthly view.
K: Moves the cursor to today.
c/d: Moves the cursor to left (the previous day)
or to right (the next day).
a/b: Moves the weekly view up or down (the
previous hour or next hour).
Setting a Holiday
In the weekly or monthly view, you can highlight a date
or days of the week with seven colour options.
“Organiser & Utilities”
→
“Organiser” tab
→
“Calendar”
Organiser & Utilities 123
For Date Colour
1. Highlight the day you wish to set.
2. Press [Options] and select “Set Holiday”.
3. Select “By Date” and then select the desired colour.
For Days of the Week Colour
1. Press [Options] and select “Set Holiday”.
2. Select “By Week” and then select days of the week
you wish to colour.
3. Select the desired colour.
Tip
•The selected date/days are also highlighted on the
calendar on the standby screen.
Note
•If the same date is set with both a date colour and
a day of the week colour, the date is highlighted in the
date colour.
•Up to 100 days can be set for the highlights.
Finding a Schedule Entry
“Organiser & Utilities”
→
“Organiser” tab
→
“Calendar”
1. In any view, press [Options] and select “Find”.
2. Enter a few letters of the subject.
Search results are displayed in time order.
Editing a Schedule Entry
“Organiser & Utilities”
→
“Organiser” tab
→
“Calendar”
1. Select the day you wish to edit.
2. Highlight the entry you wish to edit, press
[Options], then select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
124 Organiser & Utilities
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“All This Week” (weekly view):
Deletes all entries for the
selected week.
“All This Month” (monthly view):
Deletes all entries for the
selected month.
“Up to Last Month” (monthly view):
Deletes all entries before the
selected month.
“All Appointments” (weekly, monthly and 2-month
view):
Deletes all entries in this
application.
Sending a Schedule Entry
“Organiser & Utilities”
→
“Organiser” tab
→
“Calendar”
1. Select the day including schedule entries you wish
to send.
2. Highlight the entry you wish to send, press
[Options], then select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Using the Bluetooth Function” on
page 147.
Note
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Receiving a Schedule Entry
When the phone receives a schedule entry, a
confirmation message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
•For details on entering Bluetooth wireless settings,
see “Connectivity” on page 147.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory
Status”.
Organiser & Utilities 125
Stopwatch
You can store 4 lap times when using the stopwatch
function.
“Organiser & Utilities”
→
“Organiser” tab
→
“Stopwatch”
1. Press B to start.
Press [LAP] to view the lap time before the
stopwatch stops. Last 4 lap times are saved.
2. Press B to stop.
Tip
•You can save a record of lap times and the stop time
by pressing [Options] and selecting “Save to
Templates”.
Resetting Time
1. After stopping the stopwatch, press [Options] and
select “Reset”.
Tasks
You can register your schedule as task entries for a
given date or time.
Creating a New Entry
“Organiser & Utilities”
→
“Organiser” tab
→
“Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and time.
4. Press [Save].
Note
•If the date and time settings have not been entered,
the date and time entry screen is displayed (p. 142).
To Select the Reminder Time
1. On the New Entry screen, select “Reminder”.
2. Select “Reminder Time”.
3. Select the reminder time.
When selecting “Other”, enter the desired reminder
date and time.
(M 7-3) (M 7-4)
126 Organiser & Utilities
To Change the Type of Alarm Tone or Video Clip
File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset
Sounds” or “My Sounds”, or select “Assign Video”.
4. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a
Ringtone for an Incoming Call” on page 134.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the desired duration.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off”
to leave it as it is.
Making the Entry Completed or Incomplete
“Organiser & Utilities”
→
“Organiser” tab
→
“Tasks”
1. Highlight the desired entry.
2. Press B.
3. On the view screen, press [Options] and select
“Check”.
To make the entry incomplete, select “Uncheck”.
Organiser & Utilities 127
Finding a Task Entry
“Organiser & Utilities”
→
“Organiser” tab
→
“Tasks”
1. Press [Options] and select “Find”.
2. Enter a few letters of the subject and press B.
Search results are displayed in time order.
Sending a Task Entry
“Organiser & Utilities”
→
“Organiser” tab
→
“Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Using the Bluetooth Function” on
page 147.
Note
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Viewing the Memory Status
“Organiser & Utilities”
→
“Organiser” tab
→
“Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser & Utilities”
→
“Organiser” tab
→
“Tasks”
→
[Options]
→
“Delete”
1. Select the desired option.
“This Task”: Deletes the selected entry.
“All Completed Tasks”: Deletes all checked
entries.
“All Tasks”: Deletes all entries.
128 Organiser & Utilities
World Clock
Setting the Time Zone
“Organiser & Utilities”
→
“Organiser” tab
→
“World
Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the
world map.
2. Press c or d to change the time zone.
3. Press B.
To Set the Custom Time Zone
“Organiser & Utilities”
→
“Organiser” tab
→
“World
Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Options] and select “Set Custom Zone”.
3. Enter the desired city name and time.
Setting Daylight Saving
“Organiser & Utilities”
→
“Organiser” tab
→
“World
Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
Countdown Timer
“Organiser & Utilities”
→
“Organiser” tab
→
“Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press B to start counting.
3. Press B to pause.
Press B again to continue counting.
4. If the countdown has finished, press [Cancel] and
then press B to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
(M 7-5) (M 7-6)
![](/img.php?id=824512&img=bg82.png)
Organiser & Utilities 129
Calculator
The calculator function performs the 4 arithmetic
calculations using up to 12 digits.
“Organiser & Utilities”
→
“Utilities” tab
→
“Calculator”
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press
[Clear].
To do the calculations, press B.
To start a new calculation, press [Clear].
Rate Conversion
You can also use the calculator as a currency calculator
to convert from/to a home currency using a conversion
rate that you enter.
To Set a Currency Conversion Rate
“Organiser & Utilities”
→
“Utilities” tab
→
“Calculator”
→
[Options]
→
“Currency Converter”
→
“Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To Convert a Value
“Organiser & Utilities”
→
“Utilities” tab
→
“Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to
Foreign”.
(M 7-
d
-1)
130 Organiser & Utilities
Voice Recorder
This allows you to record a voice clip, which can be
used to remind you of schedule entries or be sent within
a multimedia message. The recorded voice clip is saved
in My Items (Music & Ringtones). Voice clips are
saved in .amr format.
Recording a Voice Clip
“Organiser & Utilities”
→
“Utilities” tab
→
“Voice
Recorder”
1. Press B to start recording.
To stop recording before the recording time is over,
press B.
2. Select “Save” to save the voice clip.
Note
•Press a (or V) or b (or W) to adjust the sound
volume when playing back the recorded file.
Sending Voice Clips
“Organiser & Utilities”
→
“Utilities” tab
→
“Voice
Recorder”
1. Press B to start recording.
To stop recording before the recording time is over,
press B.
2. Select “Save and Send”.
3. Select “As Message” or “To Media Album”.
For details on creating a message, see “Creating a
New Message” on page 82.
(The Media Album service is not available with
some service providers. Please contact your service
provider for more information.)
Selecting the Record Time
“Organiser & Utilities”
→
“Utilities” tab
→
“Voice
Recorder”
→
[Options]
→
“Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are
automatically saved to a memory card.
Selecting Storage Memory
“Organiser & Utilities”
→
“Utilities” tab
→
“Voice
Recorder”
→
[Options]
→
“Save New Sounds”
1. Select the desired location.
When selecting “Choose bef. Saving”, you can
select the location when saving a voice clip.
(M 7-
d
-2)
Organiser & Utilities 131
Expenses Memo
You can record an expenses memo with pre-defined or
edited categories.
Recording in the Expenses Memo
“Organiser & Utilities”
→
“Utilities” tab
→
“Expenses Memo”
→
“Add New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals
“Organiser & Utilities”
→
“Utilities” tab
→
“Expenses Memo”
→
“Totals”
Recorded expenses are displayed on the screen.
To Change Category
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
To Change Amount
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item or All Items
1. In the total view, highlight the desired item.
2. Press [Options] and select “Delete Item” or “Delete
All”.
Editing the Category Name
“Organiser & Utilities”
→
“Utilities” tab
→
“Expenses Memo”
→
“Edit Category”
1. Select the desired category name.
2. Modify the name.
Phone Help
You can view the help list and use it to guide you in the
phone’s functions.
“Organiser & Utilities”
→
“Utilities” tab
→
“Phone
Help”
1. Press a or b.
(M 7-
d
-3)
(M 7-d-3-1)
(M 7-d-3-2) (M 7-d-3-3)
(M 7-
d
-4)
![](/img.php?id=824512&img=bg85.png)
132 SIM Application
SIM Application
You can refer to the information on the SIM. Contact
your service provider for further details.
(M 10)
![](/img.php?id=824512&img=bg86.png)
Settings 133
Settings
Profiles
The ringtone, sound, vibration and light settings can be
customised for each profile according to your
environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”,
“Car”, “Headset” and “Silent”.
Activating a Profile
“Settings”
→
“Profiles” tab
1. Select the desired profile.
Note
•When a profile is set, the corresponding indicator
described on page 33 is displayed in standby.
Tip
•In standby, press and hold R to switch Profiles
between Silent mode and the profile most recently
activated.
Resetting Profile Settings
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
Volume
You can adjust the volume for incoming voice calls,
SMS/MMS/Email messages and other sounds
(“General Volume”) to one of six levels, or set an
increasing volume for all of these except “General
Volume”.
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
4. Select “For Incoming Call”, “For New Message” or
“General Volume”.
(M 12)
134 Settings
5. Press a (or d) to increase the ringer volume or
press b (or c) to decrease the ringer volume and
then press B.
To select “Increasing Volume”, press a (or d) at
level 5.
To select “Silent”, press b (or c) at level 1.
Tip
•You can select from two levels or an increasing
volume, when selecting the “Silent” profile.
Assigning a Ringtone for an Incoming Call
You can set a ringtone for incoming voice and video
calls. You can select from different tones including
patterns, sound effects and melodies or set a sound in
Saved Sounds as the default ringtone.
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For Voice Call” or “For Video Call”.
5. Select “Assign Tone”.
6. Select “Preset Sounds” or “My Sounds”.
7. Highlight the ringtone you wish to use.
To hear the demo play, press [Options] and select
“Play”.
8. Press [Options] and select “Assign” for “Preset
Sounds” or “Select” for “My Sounds”.
Note
•Even if you delete a sound that is being used as a
ringtone, the setting remains the same and the default
ringtone sounds.
•Melodies can be selected from “My Sounds” and
“Preset Sounds”.
Settings 135
Assigning a Ring Video Clip for an Incoming
Call
You can set a ring video clip for incoming voice and
video calls. You can set a video clip in Saved Videos as
the default ring video clip.
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For Voice Call” or “For Video Call”.
5. Select “Assign Video”.
6. Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select
“Play”.
7. Press [Options] and select “Select”.
Message Notification
When receiving messages, your phone will notify you
of their arrival with the ringtone or ring video clip you
specify.
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For New Message”.
5. Select “Assign Tone” or “Assign Video”.
If “Assign Tone” is selected, select “Preset Sounds”
or “My Sounds”.
6. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone for an Incoming
Call” on page 134 or “Assigning a Ring Video Clip
for an Incoming Call”.
7. Press [Options] and select “Assign” for “Preset
Sounds” or “Select”.
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration of message notification in
2 digits using the digit keys.
136 Settings
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any key.
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Keypad Tones”.
5. Highlight the desired tone pattern.
6. Press [Options] and select “Assign”.
Warning Tone
Your phone can be set to emit a warning tone when an
error occurs.
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Warning Tone”.
5. Select “Tone” or “Duration”.
For “Tone”, select “Off”, “Preset Sounds” or “My
Sounds”.
For “Duration”, select the desired time between 0.5
and 2 seconds.
Power On/Off Sound
Your phone can be set to emit a sound when it is
switched on or off.
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Power On Sound” or “Power Off Sound”.
5. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “My
Sounds”.
For “Duration”, enter the desired duration of sound
in 2 digits using the digit keys.
![](/img.php?id=824512&img=bg8a.png)
Settings 137
Vibration
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Vibration”.
4. Select “For Incoming Call” or “For New Message”.
5. Select “Switch On/Off” and then select “On” to
activate.
If you wish to change the vibration pattern, select
“Vibration Pattern” and then select the desired
option.
Tip
•When you select “On” in step 5, “ ” is displayed in
standby.
Any Key Answer
You can answer a call by pressing any key except F or
[Busy]. For details, see page 37.
“Settings”
→
“Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
Phone Settings
Setting the Display
You can change the display settings.
(M 12-d-1)
138 Settings
Setting the Wallpaper
Your phone includes preset pictures to be used as
wallpaper in standby. Pictures taken with the phone’s
digital camera or images downloaded from a WAP site
can also be used as wallpaper.
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“Wallpaper”
1. Select the folder in which the picture you wish to set
is contained.
Pictures can be selected from “My Pictures”,
“Preset Pictures” or “Other Documents”.
2. Select the desired picture.
3. After displaying the picture, press B.
Note
•Some pictures cannot be used because of their
picture and data types.
•If the picture in My Pictures is already set, it is
displayed in step 1. Press [Change] and select the
desired picture.
•Wallpaper can be linked to a theme. Select “Link to
Theme” in step 1.
Themes
You can easily customise the display by using the
theme files.
The theme files downloaded from a WAP site can be
used.
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“Themes”
1. Select “Preset Themes” or “My Themes”.
2. Select the desired theme file.
Tip
•Even after a theme is set, you can set a wallpaper
regardless of the set theme. In this case, the other
items follow the set theme.
(M 12-
d
-1-1) (M 12-
d
-1-2)
Settings 139
System Graphics
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken with the phone’s digital camera or
images downloaded from a WAP site can be used.
To Use Preset Animation/Pattern
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“System Graphics”
1. Select the desired function to set the picture to.
2. Select “Preset Animation” when you select “Power
On” or select “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when
you select “Incoming Call” or “Incoming Video
Call” in step 1.
To Set My Pictures
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“System Graphics”
1. Select the desired function to set the picture to.
2. Select “My Pictures”.
3. Select the desired picture.
4. After displaying the picture, press B.
5. Specify the area you wish to display using the
navigation keys, then press B.
Note
•Some pictures cannot be used because of their
picture and data types.
•If the picture in My Pictures is already set, it is
displayed in step 2. Press [Change] and select the
desired picture.
Setting the Standby Display
You can set the standby screen display.
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“Standby Display”
1. Select “Clock/Calendar” or “Show Indicators”.
(M 12-
d
-1-3)
(M 12-d-1-4)
140 Settings
Setting the Greeting Message
You can set the message which is displayed when the
phone is turned on.
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“Greeting Message”
1. Select “Switch On/Off” and then select “On” or
“Off”.
Tip
•If you wish to edit the message, select “Edit
Message” in step 1 and enter a message (up to 10
characters).
Backlight
The backlight will shut off if you do not press the
keypad for a certain length of time. You can specify a
desired time to elapse before the backlight shuts off,
which will help conserve battery life.
Tip
•When you purchase this phone, Backlight is set to 15
seconds.
To Select the Backlight Time Out
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“Backlight”
→
“Time Out”
1. Select the desired time.
Select “Off” to shut it off.
To Adjust the Brightness of the Backlight
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“Backlight”
→
“Brightness”
1. Press a (Light) and b (Dark) to switch between 4
levels of clarity.
2. Press B.
Setting the Display Saving
The screen of this phone will automatically turn off
after a given amount of time. You can change the length
of time before the Display Saving goes into effect,
which will help conserve battery life.
“Settings”
→
“Phone Settings” tab
→
“Display”
→
“Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is
set to 2 minutes.
(M 12-
d
-1-5)
(M 12-d-1-6)
(M 12-d-1-7)
Settings 141
Note
•Display Saving does not work while you are making
a call, using WAP, or using an application.
•To cancel the Display Saving: The display saving
continues until either a key is pressed or there is an
incoming alert. The first key press only cancels this
function. You must press another key in order to enter
any numerical or text value.
Sounds & Alerts
You can use this menu to check or edit the current
profile settings (except “Any Key Answer”).
Event Light
You can set the Small Light to flash when receiving an
incoming call or a new message.
“Settings”
→
“Phone Settings” tab
→
“Sounds &
Alerts”
→
“Event Light”
1. Select the desired option.
“For Voice Call”: Flashes when an incoming
voice call is received.
“For Video Call”: Flashes when an incoming
video call is received.
“For New Message”: Flashes when a new
message is received.
Status Light
You can set the Small Light to flash when you miss any
incoming calls or new messages.
“Settings”
→
“Phone Settings” tab
→
“Sounds &
Alerts”
→
“Status Light”
1. Select the desired option.
“For Missed Call”: Flashes when an incoming
voice call is missed.
“For New Message”: Flashes when a new
message is missed.
Slider Settings
You can set the action when sliding open or sliding
close your phone.
“Settings”
→
“Phone Settings” tab
→
“Slider
Settings”
(M 12-d-2)
(M 12-d-2-5)
(M 12-
d
-2-6)
(M 12-d-3)
142 Settings
To Set the Open Action for Calling
1. Select “Calls on Open” and select the desired
option.
“Accept Call”: Enables answering an
incoming call by sliding
open the phone.
“No Action”: Disables answering an
incoming call by sliding
open the phone.
To Set the Close Action for Calling
1. Select “Calls on Close” and select the desired
option.
“End Call”: Enables terminating a call
by sliding close the phone.
“No Action”: Disables terminating a call
by sliding close the phone.
To Set the Close Action for Locking
1. Select “Lock on Close”.
2. Select the desired time to elapse before the phone
locks after sliding it close.
If you select “No Action”, sliding close the phone
will not lock it.
Date & Time
You need to set the correct time and date in order for
your phone’s various time-based functions to work
correctly.
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Date/Time”
1. Enter the day, month, year and time using the digit
keys.
Tip
•When you enter the time in the 12-hour format, press
a or b to switch between am and pm. The order in
which the date and time is displayed is based on the
format setting.
(M 12-
d
-4)
Settings 143
To Set Daylight Saving
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Daylight Saving”
1. Select “On” or “Off”.
To Set the Time Zone
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Time Zone”
1. Press c or d to select the home city to set.
2. Press B.
To Customise the Time Zone
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Time Zone”
→
[Options]
→
“Set Custom
Zone”
1. Enter the city name.
2. Enter the time-zone differences using the digit keys.
Press a or b to switch between − and +.
3. Press B.
World Clock
For details, see page 128.
To Select the Time Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Time Format”
1. Select “24 Hour” or “12 Hour”.
To Select the Date Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Date Format”
1. Select from “D.M.Y”, “M-D-Y” or “Y/M/D”.
To Select the Calendar Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
(M 12-
d
-4-2)
(M 12-d-4-3)
(M 12-
d
-4-4)
(M 12-d-4-5)
(M 12-d-4-6)
(M 12-d-4-7)
144 Settings
Language Setting
You can change the language displayed on the phone.
“Settings”
→
“Phone Settings” tab
→
“Language”
1. Select the desired language.
Tip
•You can also change the input language on the text
entry screen (p. 48).
Note
•If you select “Automatic” in step 1, the language
preset on the SIM card is selected.
•If the language preset on the SIM card is not
supported, then the default language of the phone is
selected.
Shortcuts
You can change the default shortcut action/assignment
of the a, b, c, d, A and C soft keys and the U
key itself with the Shortcuts menu.
The menu shows the current assignment of each of the
above keys.
“Settings”
→
“Phone Settings” tab
→
“Shortcuts”
1. Highlight the key you wish to change.
2. Press [Assign].
3. Press a and b to scroll by item.
Press c and d to scroll by group.
4. Press [Select] to update the key for the highlighted
item.
Note
•If you are outside of your network area, the network-
related items are not available.
Tip
•You can clear the settings by selecting “Set to
Default” in step 1.
Locks
You can set various locks on your phone such as PIN
Entry and Handset Lock.
“Settings”
→
“Phone Settings” tab
→
“Security”
→
“Locks”
(M 12-
d
-5)
(M 12-d-7)
(M 12-d-8-1)
Settings 145
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the
PIN code each time the phone is switched on. Your PIN
code is registered on the SIM card and you should have
been made aware of the code when you purchased the
SIM card. Contact your service provider for further
details.
Select “On” for “PIN Entry” and enter your PIN code if
you wish to activate the PIN lock.
Note
•If you enter the wrong PIN code three times, the SIM
card will lock. To remove the lock, contact your
service provider/SIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on
the SIM card. Before you change the PIN code, select
“On” for “PIN Entry”.
Enter the existing PIN code for “Change PIN2” after
selecting “PIN Entry”, and enter a new PIN code twice.
To Change the PIN2 Code
PIN2 is a second PIN code used to unlock certain
features of a SIM card, such as Fixed Dialling and Call
Cost metering. Not all SIM cards use the PIN2 code.
This menu may not be displayed depending on the type
of your SIM card.
Enter the existing PIN code for “Change PIN2” after
selecting “PIN Entry”, and enter a new PIN2 code
twice.
Handset Lock
The Handset Lock prevents unauthorised use of the
phone or certain features on the phone when the power
is turned on. By setting this option on, your phone or
certain features on your phone are locked until the
correct handset code is entered.
Select “On” for “Handset Lock” if you wish to activate
the Handset Lock.
146 Settings
Function Lock
By setting this option on, all the functions of your
phone will be locked until the correct handset code is
entered.
Enter your handset code for “Function Lock” if you
wish to activate the Function Lock.
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function
Lock off.
Contacts Lock
The Contacts Lock function prevents unauthorised use
of your Contacts List.
Select “On” to lock or “Off” to unlock for “Contacts
Lock” and enter your handset code.
For details on the handset code, see “Changing the
Handset Code”.
Showing Secret Data
By setting this option on, the hidden data can be
displayed.
Select “On” to display or “Off” to hide for “Show
Secret Data”. Enter your handset code when you select
“On”.
For details on the handset code, see “Changing the
Handset Code”.
Changing the Handset Code
The default handset code is “9999”.
Select “Change Handset Code” and enter the old
handset code, then enter a new handset code twice.
Master Reset
Resetting Settings from M1 to M12
“Settings”
→
“Phone Settings” tab
→
“Security”
→
“Master Reset”
→
“Reset Settings”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code”.
Note
•Some settings are not deleted by this function. Data
stored in Contacts List, etc. is not deleted.
(M 12-d-8-2)
![](/img.php?id=824512&img=bg94.png)
Settings 147
Resetting All Settings from M1 to M12 and All
Created Data
“Settings”
→
“Phone Settings” tab
→
“Security”
→
“Master Reset”
→
“Reset All”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
Connectivity
Using the Bluetooth Function
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology enabled
phones, as well as PCs (USB connection is possible
using Data Cable accessory).
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres from the devices
before searching.
To Turn On or Off the Bluetooth Wireless
Function
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Switch On/Off”
1. Select “On” or “Off”.
When “On” is selected, the Bluetooth wireless
setting is activated, and “ ” is displayed.
To Show or Hide Your Phone
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Visibility”
1. Select the desired visibility settings.
“Show My Phone”: Allows other devices to
recognise your phone.
“Hide My Phone”: Hides your phone from
other devices.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
(M 12-d-d-1)
(M 12-
d
-
d
-1-1)
(M 12-d-d-1-2)
(M 12-d-d-1-3)
148 Settings
Note
•You can search for devices even when the Bluetooth
wireless function is off. Once pairing is started, the
phone turns the Bluetooth wireless function on
automatically.
•You can only select one device for pairing. To change
the paired device, see “To Activate the Paired
Device”.
•Pairing means authentication has been established
between the two devices.
•In order to pair two devices with Bluetooth wireless
technology, the users should agree on the same
passcode for both devices.
•The passcode is used only once, so there is no need to
remember it. The passcode can be different each time
the devices are connected.
•Devices that do not have a user interface (i.e.,
headsets and car kits) have a factory-set passcode.
See the user guide for the device.
Tip
•You can save battery power by turning the Bluetooth
wireless function off while it is not in use. Turn the
Bluetooth wireless function off in “To Turn On or Off
the Bluetooth Wireless Function” on page 147 or in
“To Turn Off Automatically” on page 150.
•During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select “Transfer
Audio” and then “To Handset” or “To Bluetooth”.
To Activate the Paired Device
Paired devices are listed by tabs for all devices and for
handsfree devices.
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
To Check and Uncheck the Paired Handsfree
Devices
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Highlight the desired handsfree device.
3. Press [Options] and select “Check” or “Uncheck”.
(M 12-d-d-1-4)
Settings 149
To Rename or Delete the Paired Devices
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Paired Devices”
1. Press c or d to switch between all paired devices
and handsfree devices.
2. Highlight the desired device.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing B after
selecting desired device.
To Send All Data to Other Devices
You can send all the data for applications such as
Contacts List, Calendar, Tasks to selected devices.
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Send All”
1. Select the desired device.
If a device is not specified, searching starts
automatically.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
•If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is
displayed. Press [Yes] to deactivate.
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent
other devices from recognising your phone and turn the
Bluetooth wireless function off automatically to save
battery power, etc.
(M 12-d-d-1-5)
(M 12-d-d-1-6)
150 Settings
To Rename Your Phone
You can rename your phone. The name is shown on
other devices when your phone is detected.
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Device Name”
1. Enter the new device name.
To Turn Off Automatically
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically
after the specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the
phone.
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Handsfree Setting”
1. Select “Private mode” or “Handsfree mode”.
“Private mode”: For talking with the phone
“Handsfree mode”: For talking with the handsfree
kit
To Turn the Authentication Request On or Off
You can request the sender or receiver of the data to
authenticate the passcode (exchanging the passcode)
before pairing devices.
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Authentication”
1. Select “On” or “Off”.
Note
•No authentication is required for the paired devices.
•Even if you select “Off”, you may authenticate the
passcode when the sender requests it.
Settings 151
To See Your Phone Details
“Settings”
→
“Connectivity” tab
→
“Bluetooth”
→
“Bluetooth Settings”
→
“My Phone Details”
Mass Storage
You can set the phone to connect to a PC via Mass
Storage mode.
“Settings”
→
“Connectivity” tab
→
“Mass Storage”
1. Press [Yes].
Note
•Activating Mass Storage mode also activates offline
mode.
•Mass Storage is not available when the battery is
low, a Java™ application is paused, or Music Player
is active.
USB Charge
You can set the phone to charge via USB, connected to
a PC.
“Settings”
→
“Connectivity” tab
→
“USB Charge”
1. Select “On” or “Off”.
Making and Restoring a Backup File to the
Memory Card
With a memory card inserted in your phone, you can
make backup files of Bookmarks, Text, Contacts,
Calendar and Tasks in the handset memory to the
memory card. You can also restore the backup data
from the memory card.
To Make a Backup File
“Settings”
→
“Connectivity” tab
→
“Memory Card”
→
“Backup/Restore”
→
“Backup”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
2. Select the desired item to back up or “Select All” to
back up all files.
To Restore a Backup File
“Settings”
→
“Connectivity” tab
→
“Memory Card”
→
“Backup/Restore”
→
“Restore”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
2. Select the desired item to restore or “Select All” to
restore all files.
(M 12-d-d-2)
(M 12-d-d-3)
(M 12-
d
-
d
-4-1)
152 Settings
3. Select the desired file to restore.
A confirmation message indicating deletion from
the handset memory is displayed.
4. Press [Yes] to start restoring.
Note
•To delete a backup file, highlight the desired item,
press [Options] and select “Delete” after performing
steps 1 to 3.
Formatting Memory Card
“Settings”
→
“Connectivity” tab
→
“Memory Card”
→
“Format Card”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
2. Press [Yes] to start formatting.
Other Settings
Network Settings
To Select a Service Automatically
Each time the power is turned on, your phone selects a
service automatically.
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Select Service”
1. Select “Auto”.
To Select a Service Manually
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Select Service”
1. Select “GSM”.
Note
•If the handset is set to GSM, it will not be able to use
any 3G only services (e.g. video calls or high speed
data access).
(M 12-d-d-4-3)
(M 12-
d
-
d
-
d
-5)
(M 12-d-d-d-5-1)
Settings 153
To Select a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Automatic”
To Select the Network Manually
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Manual”
1. Select the desired network.
To Add a New Network
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Add New
Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following
steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Enter either 2G (GSM) or 3G for the network type.
To Edit the Preferred List
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position,
“Add to end” to insert at the end or “Delete” to
delete.
To Set Flight Mode
When the Flight Mode is set to “On”, the phone cuts off
the network connections and stops searching for
available networks to connect. With this mode, you can
play games or music even when you fly.
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Flight Mode”
1. Select “On” or “Off”.
Area Info
The Area Info is the message information that operators
send to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in standby.
(M 12-d-d-d-5-3)
(M 12-d-d-d-5-5)
154 Settings
To Enable/Disable Area Info
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Area Info”
1. Select “On” or “Off”.
Note
•This function may not be available on all mobile
phone networks. Contact your service provider for
more information.
•If Area Info is set to “On”, the standby time will
decrease.
Showing the Network Information
“Settings”
→
“Other Settings” tab
→
“Network
Settings”
→
“Network Information”
Information about the operator name, package and
services are displayed.
Internet Settings
Note
•In normal operations, you do not need to change the
settings.
•Internet settings have already been entered in your
phone depending on your service provider. You may
have restrictions on viewing, deleting, copying or
modifying the settings. Contact your service provider
for details.
Browser Settings
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
→
“Browser Settings”
→
“Create New”
“Profile Name”: WAP profile name (Unique
name)
“Proxy”: Proxy setting for WAP
(When “Use Proxy” is On)
“Access Point”: Access point for WAP
(When “Use Proxy” is Off)
“Use Proxy”: Setting to connect by Proxy
or not
“Home”: Home page URL (When
“Use Proxy” is Off)
(M 12-d-d-d-5-6)
(M 12-
d
-
d
-
d
-6)
(M 12-d-d-d-6-1)
Settings 155
Streaming Settings
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
→
“Streaming Settings”
→
“Create New”
“Profile Name”: Profile name for streaming
(Unique name)
“Proxy Address”: Proxy address
“Proxy Port Number”: Port number (1-65535)
“Access Point”: Access point
Proxy Settings
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
→
“Proxy Settings”
→
“Create New”
“Proxy Name”: Proxy name (Unique name)
“Proxy Address”: IP address
“Access Point”: Access point
“Home”: Home page URL
“Port Number”: Port number (1-65535)
“
Authentication Type
”: Authentication Type
(“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”: User name for
authentication
“Password”: Password for authentication
Access Point Settings
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
→
“Access Point Settings”
→
“Create New”
“Access Point Name”: Access point name (Unique
name)
“APN”: APN setting
“
Authentication Type
”: Authentication type
(“NONE”, “PAP” or
“CHAP”)
“User Name”: User name for access point
“Password”: Password for access point
“DNS”: DNS (Domain Name
System)
“Linger Time”: Linger Time (1-99999 sec.)
(M 12-
d
-
d
-
d
-6-2)
(M 12-d-d-d-6-3)
(M 12-
d
-
d
-
d
-6-4)
156 Settings
Re-provisioning Settings
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
→
“Re-provisioning Settings”
→
“Execute
Pending”
Clearing DNS Cache
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
→
“Clear DNS Cache”
White List
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
→
“White List”
→
“Create New”
“SMSC Address”: SMSC address
“SM Orig. Address”: SM originating address
To Activate the Browser/Streaming Profile
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
1. Select “Browser Settings” or “Streaming Settings”.
2. Select the desired profile you wish to activate.
To Edit/Copy/Delete the Browser/Proxy/
Streaming/Access Point Profile
“Settings”
→
“Other Settings” tab
→
“Internet
Settings”
1. Select “Browser Settings”, “Streaming Settings”,
“Proxy Settings” or “Access Point Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”: Modify the desired item
“Copy”: Enter the new file name
“Delete”: Press [Yes] to delete
(M 12-
d
-
d
-
d
-6-5)
(M 12-d-d-d-6-6)
(M 12-d-d-d-6-7)
![](/img.php?id=824512&img=bg9e.png)
Telephony 157
Telephony
Call Log
The phone will record the last 30 missed calls, received
calls and dialled numbers.
Viewing Call Log
“Telephony”
→
“Call Log” tab
1. Select from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D to make a
voice call or S to make a video call.
Tip
•You can also confirm call logs by pressing D in
standby.
Sending Messages
1. In the call log list, highlight the phone number or
name you wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a
New Message” on page 82.
Deleting a Call Log
1. In the call log list, press [Options] and select
“Delete” or “Delete All”.
Call Timers
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All
Calls
“Telephony”
→
“Call Log” tab
→
“Call Timers”
1. Select “Dialled Calls” or “Received Calls”.
(M 9)
(M 9-5)
![](/img.php?id=824512&img=bg9f.png)
158 Telephony
Resetting Call Timers
“Telephony”
→
“Call Log” tab
→
“Call Timers”
→
“Clear Timers”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 146.
Call Costs
This function lets you check the charges for your calls.
Some networks do not support Charging Advice. Please
check with your service provider for availability.
Checking the Cost of the Last Call
“Telephony”
→
“Call Log” tab
→
“Call Costs”
→
“Last Call”
Checking the Total Call Cost
“Telephony”
→
“Call Log” tab
→
“Call Costs”
→
“All Calls”
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
“Telephony”
→
“Call Log” tab
→
“Call Costs”
→
“Cost Units”
→
“Set Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
“Telephony”
→
“Call Log” tab
→
“Call Costs”
→
“Max Cost”
→
“Set Limit”
1. Enter your PIN2 code.
2. Enter a value.
Checking the Residual Credit
“Telephony”
→
“Call Log” tab
→
“Call Costs”
→
“Residual Credit”
(M 9-5-3)
(M 9-6)
(M 9-6-1)
(M 9-6-2)
(M 9-6-5)
(M 9-6-6)
(M 9-6-3)
Telephony 159
Resetting All Call Costs
“Telephony”
→
“Call Log” tab
→
“Call Costs”
→
“Clear Costs”
1. Enter your PIN2 code.
Data Counter
You can confirm the number of bytes used in the 3G
(UMTS) and GSM transmission.
“Telephony”
→
“Call Log” tab
→
“Data Counter”
1. Select from “Last Data” or “All Data”.
Resetting All Data Counter
“Telephony”
→
“Call Log” tab
→
“Data Counter”
→
“Clear Counter”
Call Restrictions
This function lets you place restrictions on incoming
and outgoing calls. To activate this option you will need
the specified password, which is available from your
service provider.
“Telephony”
→
“Call Restrictions” tab
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”: Restricts outgoing calls.
“Incoming Calls”: Restricts incoming calls.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”:
Restricts all outgoing calls
except emergency calls.
“Bar International Calls”:
Restricts all outgoing
international calls.
“Only Local & Home”:
Restricts all outgoing
international calls except to
your home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”:
Restricts all incoming calls.
“Bar if Abroad”: Restricts all incoming calls
when you are outside of the
coverage from your
registered service provider.
(M 9-6-4)
(M 9-7)
(M 9-7-3)
160 Telephony
3. Select one of the following options:
“All Services”: Restricts all services.
“Voice Calls”: Restricts all voice calls.
“Video Calls”: Restricts all video calls.
“Data”: Restricts all data calls.
“Fax”: Restricts all fax calls.
“Messages”: Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Telephony”
→
“Call Restrictions” tab
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Fixed Dialling Numbers
This option is available on most SIM cards for mobile
phones. It allows you to configure a SIM card so that it
can only be used to make calls to numbers on a
predefined list.
Note
•This service depends on the SIM card.
To Enable Fixed Dialling Numbers
“Telephony”
→
“Call Restrictions” tab
→
“Fixed
Dialling Numbers”
1. Enter your PIN2 code.
2. Select “Switch On/Off”.
3. Select “On” to enable this function.
Telephony 161
To Add a New Name
“Telephony”
→
“Call Restrictions” tab
→
“Fixed
Dialling Numbers”
1. Enter your PIN2 code.
2. Select “Edit Dial List”.
3. Highlight a blank entry, press [Options], then select
“Add New Dial”.
4. Add a name and a phone number.
For details on adding a name and phone number, see
“Adding a New Contact” on page 51.
5. Press [Save].
Rejecting an Incoming Call
You can register phone numbers you do not wish to
answer.
To Reject the Registered Number
“Telephony”
→
“Call Restrictions” tab
→
“Rejected
Numbers”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Telephony”
→
“Call Restrictions” tab
→
“Rejected
Numbers”
→
“Set Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Rejecting a Call when the Caller’s Number is
Withheld
“Telephony”
→
“Call Restrictions” tab
→
“Withheld
Call”
1. Select “On” or “Off”.
162 Telephony
Changing the Network Password
“Telephony”
→
“Call Restrictions” tab
→
“Change
N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to
enter the password again.
4. Press B.
Call Settings
Tip
•You can also display Call Settings menu in the
following procedure:
“Settings”
→
“Other Settings” tab
→
“Call
Settings”
Video Call Settings
Set various types of functions and services for video
calls.
To Select an Image for the Alternative Image
You can select an image shown to the other party
between the sub camera image and an alternative image
from the saved picture files.
“Telephony”
→
“Call Settings” tab
→
“Video Call
Settings”
→
“Camera Picture”
1. Select “Default Image” or “Alternative Image”.
For “Default Image”, select “Internal Camera”,
“External Camera” or “Alternative Image”.
For “Alternative Image”, select “Preset Picture” or
“My Pictures”.
(M 9-d-d-d-1)
Telephony 163
To Turn On or Off the Speaker
“Telephony”
→
“Call Settings” tab
→
“Video Call
Settings”
→
“Loudspeaker”
1. Select “On” to turn on the loudspeaker or select
“Off” to turn it off.
To Select the Picture Quality
Select the desired data format for your environment.
“Telephony”
→
“Call Settings” tab
→
“Video Call
Settings”
→
“Incoming Picture Quality”
“Telephony”
→
“Call Settings” tab
→
“Video Call
Settings”
→
“Outgoing Picture Quality”
1. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
Select “Frame Rate Priority” to perform faster
communication.
To Set the Backlight
With this setting on, the phone’s backlight is on when
making a video call.
“Telephony”
→
“Call Settings” tab
→
“Video Call
Settings”
→
“Backlight”
1. Select “Always On”, “Always Off” or “As Normal
Setting”.
The “As Normal Setting” option depends on the
backlight setting of the display (p. 140).
To Mute the Microphone
You can mute the microphone while making a video
call.
“Telephony”
→
“Call Settings” tab
→
“Video Call
Settings”
→
“Mute Microphone”
1. Select “On” to mute or “Off” to cancel mute.
164 Telephony
To Assign Hold Guidance Picture
You can display an image saved in the phone on your
display while you are putting a call on hold.
“Telephony”
→
“Call Settings” tab
→
“Video Call
Settings”
→
“Hold Guidance Picture”
1. Select “Preset Picture” or “My Pictures”.
2. Select the desired picture.
Voicemail & Diverts
This service can be used to divert incoming calls that
you cannot answer. Calls can be diverted to another
phone number or to your Voicemail system.
Note
•This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
To Set the Voicemail Numbers
You can divert calls to the network Voicemail service
centre. Depending on whether you are inside or outside
your network area, you can set two Voicemail numbers,
a number for your home network area or for a roaming
network area.
Note
•This service depends on the SIM card. Contact your
SIM card vendor for more information.
“Telephony”
→
“Call Settings” tab
→
“Voicemail &
Diverts”
→
“Voicemail”
→
“Settings”
→
“Voicemail
Numbers”
1. Select “Home Mailbox No.” or “Roam Mailbox
No.”.
2. Enter the desired phone number.
To Access the Voicemail Centre
1. Press and hold G in standby.
(M 9-d-d-d-2)
![](/img.php?id=824512&img=bga6.png)
Telephony 165
To Activate the Voicemail Service
“Telephony”
→
“Call Settings” tab
→
“Voicemail &
Diverts”
→
“Voicemail”
→
“Activate”
1. Select one of the following options:
“Always”: Diverts all calls without
ringing.
“When Busy”: Diverts incoming calls while
you are talking on the phone.
“No Answer”: Diverts incoming calls if you
do not answer a call within a
certain period of time.
“Not Reachable”: Diverts incoming calls when
your phone has no network
service or is switched off.
If you select “No Answer”, select the period of time
from 6 levels (05 to 30 seconds).
2. Press B.
To Activate the Diverts Service
Select the appropriate option.
“Telephony”
→
“Call Settings” tab
→
“Voicemail &
Diverts”
→
“Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further
divert options.
2. Select from “Always”, “When Busy”, “No Answer”
or “Not Reachable”.
If you select “No Answer”, select the period of time
from 6 levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert
calls or search for it in the Contacts List (p. 52).
4. Press B.
Note
•When “Voice Calls” diverts are set to “Always”,
“ ” is displayed in standby.
To Check the Diverts Status
“Telephony”
→
“Call Settings” tab
→
“Voicemail &
Diverts”
→
“Status”
1. Select the diverts option you wish to check.
166 Telephony
To Cancel the Diverts and Voicemail Service
Once you have changed the diverts settings, you can
cancel them all with this service.
“Telephony”
→
“Call Settings” tab
→
“Voicemail &
Diverts”
→
“Cancel All”
Call Waiting
Note
•This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
If you wish to be able to receive another incoming call
while you have a call in progress, you must activate the
Call Waiting service.
“Telephony”
→
“Call Settings” tab
→
“Call Waiting”
1. Select “On”, “Off” or “Status”.
Showing My Phone Number
This lets you control whether to show your phone
number when calling another party or not.
“Telephony”
→
“Call Settings” tab
→
“Show My
Number”
1. Select “On”, “Off” or “Status”.
Note
•Some networks do not support this service. Please
check with your service provider for availability.
Time & Cost
To Display Call Costs
“Telephony”
→
“Call Settings” tab
→
“Time & Cost”
→
“Display Call Cost”
1. Select “On” or “Off”.
To Display the Call Time Counter
“Telephony”
→
“Call Settings” tab
→
“Time & Cost”
→
“Call Time Counter”
1. Select “On” or “Off”.
Minute Minder
Minute Minder function informs you of your talk time
by sounding a tone after every minute.
“Telephony”
→
“Call Settings” tab
→
“Minute
Minder”
1. Select “On” or “Off”.
Auto Redial
“Telephony”
→
“Call Settings” tab
→
“Auto Redial”
1. Select “On” or “Off”.
(M 9-d-d-d-3)
(M 9-d-d-d-4)
(M 9-d-d-d-5)
(M 9-d-d-d-6)
(M 9-d-d-d-7)
![](/img.php?id=824512&img=bga8.png)
Connecting 880SH to Your PC 167
Connecting 880SH to Your PC
You can use the following functions by connecting the
880SH to your PC using a USB port or Bluetooth
wireless technology port:
• 3G/GSM modem
• Handset Manager for 880SH
• Music Manager for 880SH
• Sync Manager for 880SH
System Requirements
Operating System:
Windows 2000*, Windows XP**,
WindowsVista
* Service Pack 4 or later
** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
USB port or Bluetooth wireless port
CD-ROM drive
To use Music Manager, DirectX9 and Windows Media
Player 9 or later are required.
3G/GSM Modem
You can use 880SH as a 3G/GSM modem to access the
Internet from your PC. Connect your phone to your PC
via Bluetooth wireless technology or USB interface.
Software installation on your PC is required.
Modem via the USB Data Cable
1. Insert the supplied CD-ROM into your PC’s
CD-ROM drive.
The 880SH CD-ROM screen is displayed.
If the 880SH CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Select the USB driver from the on-screen
instructions of your CD-ROM, and start installation
of USB driver software following the on-screen
instructions of your CD-ROM.
•Yo
u can also download USB driver software from
our web-site, http://www.sharp-mobile.com.
•
During installation, the on-screen instructions ask
you to connect your phone to your PC. Power on
your phone and atta
ch the phone to the USB port
of your PC using the USB data cable (optional
accessory).
![](/img.php?id=824512&img=bga9.png)
168 Connecting 880SH to Your PC
3. Follow the on-screen instructions to complete
installation.
4. Select the modem driver from the on-screen
instructions of your CD-ROM, and install modem
driver software following the on-screen instructions
of your CD-ROM.
•
You can also download modem driver software
from our web-site, http://www.sharp-mobile.com.
5. Follow the on-screen instructions to use your phone
as a modem driver.
• When the on-screen instructions ask modem
driver type, select the cable as a modem driver.
Modem via Bluetooth Connection
1. Turn on the Bluetooth wireless function of your
phone.
For details, see “To Turn On or Off the Bluetooth
Wireless Function” on page 147.
2. Pair your PC with your phone.
For details on pairing your PC with your phone, see
“To Search for Devices to be Paired” on page 147.
3. Insert the supplied CD-ROM into your PC’s
CD-ROM drive.
The 880SH CD-ROM screen is displayed.
If the 880SH CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
4. Select the modem driver from the on-screen
instructions of your CD-ROM, and install modem
driver software following the on-screen instructions
of your CD-ROM.
5. Follow the on-screen instructions to use your phone
as a modem driver.
• When the on-screen instructions ask modem
driver type, select Bluetooth as a modem driver.
Note
•Modem communication is not possible while
communicating with the Handset Manager via
Bluetooth wireless technology or USB interface.
•It is not recommended that you make or answer calls
when you are using 880SH as a GSM/GPRS modem.
The operation may be interrupted.
•Your phone exhausts the battery when connected to a
PC, even when not communicating.
![](/img.php?id=824512&img=bgaa.png)
Connecting 880SH to Your PC 169
Handset Manager
You can transmit the following items between your
phone and your PC, and can use Contacts List entries on
your PC:
• My Items files (Pictures/Music & Ringtones/Videos/
Other Documents data)
• Contacts List entries
• Short messages
• Schedule entries
Via USB Data Cable
1. Insert the supplied CD-ROM into your PC’s
CD-ROM drive.
The 880SH CD-ROM screen is displayed.
If the 880SH CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation
of Handset Manager software following the
on-screen instructions of your CD-ROM.
•
You can also download Handset Manager software
from our web-site, http://www.sharp-mobile.com.
• If you have not installed the USB driver, follow
steps 2 and 3 on page 167.
3. Follow the on-screen instructions to complete
installation.
• During installation, the on-screen instructions
ask you to select an interface. Select the USB
data cable as an interface.
4. Connect your phone to your PC. Power on your
phone and attach the phone to the USB port of your
PC using the USB data cable (optional accessory).
5. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass
Storage” on page 151.
6. Launch Handset Manager from the relevant folder.
7. Follow the on-screen instructions of Handset
Manager.
For details, see the User Guide Software which was
installed with Handset Manager.
![](/img.php?id=824512&img=bgab.png)
170 Connecting 880SH to Your PC
Via Bluetooth
1. Insert the supplied CD-ROM into your PC’s
CD-ROM drive.
The 880SH CD-ROM screen is displayed.
If the 880SH CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation
of Handset Manager software following the
on-screen instructions of your CD-ROM.
•
You can also download Handset Manager software
from our web-site, http://www.sharp-mobile.com.
3. Follow the on-screen instructions to complete
installation.
• During installation, the on-screen instructions
ask you to select an interface. Select Bluetooth as
an interface.
4. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass
Storage” on page 151.
5. Launch Handset Manager from the relevant folder.
6. Follow the on-screen instructions of Handset
Manager.
For details, see the User Guide Software which was
installed with Handset Manager.
Note
•Some large files may not be able to be transmitted
from the PC to the phone.
•Applications (Camera, My Items, etc.) do not run
when the phone is connected to the PC via Bluetooth
wireless technology interface or USB data cable.
•If you have already installed Sharp Handset
Manager, you need to uninstall the previous one.
•If you have trouble with installation, uninstall
Handset Manager, restart your PC, reinstall Handset
Manager and restart.
Music Manager
You can exchange the playlist and the sound files
between your phone and your PC, and can manage
them on your PC. Available files are the sound files in
the following formats: MP3, AAC, 3GPP.
![](/img.php?id=824512&img=bgac.png)
Connecting 880SH to Your PC 171
Main Control Panel
Control all the main actions from here.
Play: Playing back a file.
Previous: Returns to the top portion of the
current file.
Next: Jumps to the next file.
Search Media File: Search media file.
Browse: Browse all the media files sorted
in Genre/Artist/Album.
Input Window: Quickly find the media files in
Library or the playlist with
keyword entry.
Media Management in PC
Media files in PC can be easily explored in 2 main
columns.
Add Playlist: Creating new playlist.
Add Smart Playlist: Creating new smart playlist.
Remove Playlist: Removing playlist.
Media Management in Handset
Media files in Handset can be easily explored in 2
main columns.
Previous Browse
Search Media File
Input Window
Media Management
in PC
Media Management
in Handset
Play
Next
Add Playlist
Add Smart Playlist
Remove Playlist
Main Control Panel
172 Connecting 880SH to Your PC
• With the drag and drop operation, you can upload the
sound files and the playlists from your PC, and also
download them to your PC.
• With the drag and drop operation, you can change the
order of tracks in the playlist of your PC.
• You can create a new playlist and delete an existing
playlist.
• With the drag and drop operation, you can add a
sound file to a playlist, and delete them from the
playlist.
• You can edit the name of a playlist of your PC.
• You can edit the title, artist name, and album name of
sound files of your PC. (only available in MP3
format)
Tip
•To add tracks from your PC into the Music Manager
library, go to “Advanced” then search music tracks.
•Once you have created your list, drag the list to the
880SH area on Music Manager, and the files will be
uploaded to the 880SH. If one or more of the files is
already stored on the handset, Music Manager will
not upload them again; the playlist will play the track
already uploaded.
•Music Manager also allows you to import existing
playlists (M3U file type) that you may have created
using other media programs.
•Use Smart Playlist to automatically add tracks to a
playlist based on criteria you can select.
Sync Manager
You can synchronise the following data with the data of
Microsoft Outlook or Outlook Express on your PC.
• Contacts List entries.
• Schedule entries.
Tip
•You can set up Sync Manager to start up and
synchronise automatically after you connect your
phone to your PC via the USB data cable.
![](/img.php?id=824512&img=bgae.png)
Troubleshooting 173
Troubleshooting
Problem Solution
The phone does not
turn on.
• Make sure the battery is
properly inserted and
charged.
PIN code or PIN2
code is rejected.
• Make sure you have entered
the correct code (4 to 8
digits).
• Your SIM card/protected
functions will become locked
after three unsuccessful
attempts.
• Contact your SIM provider if
you do not have the correct
PIN code.
The SIM card
becomes locked.
• Enter the PUK code (8 digits)
provided by your service
provider (if supported).
• If the attempt is successful,
enter the new PIN code and
confirm your phone is
operational again. Otherwise
contact your dealer.
The display is
difficult to read.
• Adjust the backlight
brightness for the display.
Phone functions do
not work after the
phone is turned on.
• Check the radio signal
strength indicator as you may
be outside the service area.
• Check to see if any error
message is displayed when
you turn your phone on. If so,
contact your dealer.
• Make sure the SIM card is
correctly inserted.
Call quality is poor.
• Your current location may not
provide good call quality (i.e.,
in a car or train). Move to a
location where radio signal
strength is greater.
Cannot send or
receive text
message.
• Make sure you are correctly
subscribed for the Short
Message Service, that the
network supports this service,
and that the centre number is
set up correctly. If not, contact
your network service
provider.
Problem Solution
![](/img.php?id=824512&img=bgaf.png)
174 Troubleshooting
Calls cannot be
made or received.
• If the message “Insert SIM
card” is displayed when the
phone is switched on, you
cannot use your SIM card or
the SIM card is damaged.
Contact your dealer or
network service provider.
• Check your call barring, fixed
dialling setting, remaining
battery and call forwarding
settings.
• Check if your phone is
currently performing data
communication using
Bluetooth wireless
technology interface or a USB
data cable.
• Check the remaining balance
if you are using a pre-paid
SIM card.
Cannot access
network service.
• Check where your account
has been registered and
where the service is
available.
Problem Solution
Limited memory
available.
• Delete any unnecessary data.
Cannot connect to
Multimedia
Messaging Service
provider.
• MMS settings and
configuration may be missing
or incorrect or the network
does not support it. Check
your service provider’s
access point number.
Contact your service provider
to confirm the correct
settings.
Call is terminated
unexpectedly.
• Magnetised objects such as
health necklaces placed near
the phone may terminate the
call. Keep your phone away
from such objects.
No entries are
displayed in the
Contacts List.
• Confirm that the Contacts
Location setting (Handset or
SIM) is correct.
Cannot receive
OBEX data.
• The OBEX data can only be
received in standby.
Problem Solution
http://www.sharp-mobile.com
![](/img.php?id=824512&img=bgb0.png)
Index 175
Index
A
Alarms 120
Area Info 153
B
Battery 14, 25
Bluetooth 147
C
Calculator 129
Calendar 121
Call Functions 35, 157
Auto Redial 166
Call Costs 158, 166
Call Log 157
Call Restrictions 159
Call Timers 157, 166
Call Waiting 39, 166
Conference Call 39
Data Counter 159
Earpiece Volume 38
Emergency Calls 35
International Calls 35
Make Another Call 38
Minute Minder 166
Muting the
Microphone 40,
43, 163
My Phone
Number 166
Redialling 36
Rejecting a Call 37,
43, 161
Sending a Busy
Tone 37, 43
Speaker 38, 44, 163
Speed Dialling 36, 62
Video Call 43, 162
Voice Call 35, 37
Voicemail &
Diverts 164
Camera 73
Continuous Shoot 78
Digital Zoom 74
Display Direction 75
Exposure 74
Focus Mode 75
Picture Quality 75
Picture Size 77, 80
Recording Time 80
Recording Video
Clips 74, 80
Settings 74
Shortcut Keys 77
Switching Modes 76
Taking Pictures 73
Video Encoding 80
Video Quality 75
Cell Broadcasts 94
Characters
Cutting, Copying,
Pasting Text 49
Entering Characters 47
Input Language 48
Input Mode 48
My Dictionary 49
Text Templates 49,
109
Contacts List
Adding New
Contact 51
Category 61
Dialling from an
Entry 53
Editing Entries 56
Group 55
Saving a Number 52
Saving an Address 86
Saving an Image 106
Searching the List 52
Sending a Message 55,
56
Storage Memory 51
Synchronising
Entries 60
Thumbnail 57
Contacts Lock 146
Countdown Timer 128
D
Display Indicators 32
E
Expenses Memo 131
F
Flight Mode 153
FM Radio 68
G
Games &
Applications 114
Java™ Settings 117
176 Index
H
Handset Code 146
Help 131
I
Instant Messenger 90
Settings 99
K
Keypad Lock 31
M
Main Menu 50
Mass Storage 151
Master Reset 146
Memory Card 14, 28, 151
Memory Status 62, 113,
124, 127
Messaging 81
Attaching/Removing
Data 84
Creating a Message 82
Drafts Box 85
Email 81, 98
Forwarding a
Message 87
Lock 88
Mailing List 55
MMS 81, 87, 96
Postcard 88
Reading a Message 86
Replying to a
Message 87
Sending Options 84
Settings 95
SMS 81, 95
Video Clip
Message 86
Voice Clip
Message 86
Mobile TV 69
Multimedia 63
Music & Ringtones 106
Music Player 63
Adding a File 65
Adding a New
Playlist 63
Downloading
Music 65
Playing Back
Music 63
Sorting 64
My Items 105
Other Documents 109
N
Navigating Functions 34
O
Organiser & Utilities 120
P
PC Connection 167
Pictures 105
PIN/PIN2 Code 145
Power On and Off 30
R
Radio DJ 69
S
Safety Precautions 4
Screensavers 118
Settings 133
Connectivity 147
Date & Time 142
Display 137
Internet 154
Language 144
Locks 144
Network 152
Profiles 133
Shortcuts 144
Slider 141
Small Light 141
Sounds & Alerts 141
SIM Application 132
SIM Card 25
Stopwatch 125
Streaming 72
T
Tasks 125
Telephony 157
Themes 108
Troubleshooting 173
U
USB Charge 151
V
Video 65, 107
Adding a File 66
Adding a New
Playlist 66
Downloading
Video 68
Playing Back Video 65
Searching a File 66
Settings 67
Vodafone live! 100
Browser Settings 102
Navigating a WAP
Page 101
Voice Recorder 130
W
World Clock 128
![](/img.php?id=824512&img=bgb2.png)
http://www.sharp-mobile.com