Sharp HRO00066 Cellular Transceiver User Manual Manual 1

Sharp Corporation Cellular Transceiver Manual 1

Contents

Manual 1

30e02_dv55_7e.fm[30/58]Before Using the Handset※Key illustrations are examples and may look different from actual keys.Component names and functionsrfegdc318675ut2bqla9hkjjpomisn4dv55_E.book  30 ページ  2008年4月17日 木曜日 午後2時12分
e02_dv55_7e.fm[31/58]31Continued on next pageBefore Using the Handset1Earpiece Listen to the other party’s voice. Listen to Record message/Voice memo.2Brightness sensor (nP. 118) The sensor detects the light of the surrounding area and automatically adjusts the display brightness and turns on/off the keypad backlight. Do not cover the sensor area with your hand or a sticker. May interfere with the sensor.3Display/Touch panel (nP. 34, P. 41)4Optical TOUCH CRUISER , (nP. 39) Slide the finger to perform the same operations as those for w of Multi-guide key.5i-mode/Operation guidance key i (,) Press to use i-mode (nP. 170). Press to execute the functions of the operation guidance (nP. 34). Press for 1+ seconds to display the i-appli software list screen (nP. 231).6External connector terminal Connect to an external device such as AC adapter/DC adapter, FOMA USB Cable with Charge Function 01/02 (sold separately) (nP. 52, P. 342). Use a flat-plug earphone/microphone with switch (sold separately), etc. by connecting to an Earphone Plug Adapter for External connector terminal (nP. 400).7Mail/Operation guidance key m Press to use mail functions (nP. 196). Press to execute the functions of the operation guidance (nP. 34). Press twice to check new messages (nP. 207). Press for 1+ seconds to display a compose message screen (nP. 196).8Start/Hands-free key s Press to make or receive a voice call. Press to use Hands-free (nP. 61). Press for 1+ seconds to use the Eco mode (Power saver) (nP. 117).9Charger terminal (nP. 53) Terminal for recharging with the desktop holder.amicroSD Card slot (nP. 333)bMouthpiece Sends out your own voice.cMulti-guide key wt Move the cursor to select an item and execute or set (nP. 34). Press to display Menu, Redial list screen, Received calls list screen, Shortcut menu and Quick search. Press t for 1+ seconds to use Multi easy lock (nP. 136). Press r for 1+ seconds to use IC card lock (nP. 263). Press q for 1+ seconds to use Side key guard (nP. 137). Press u for 1+ seconds to adjust the earpiece volume (nP. 110).dCamera/Operation guidance key C Press to activate the camera (nP. 151). Press to execute the functions of the operation guidance (nP. 34). Press for 1+ seconds to activate 1Seg (nP. 285).ePhonebook/Operation guidance key a Press to use the phonebook (nP. 96). Press to execute the functions of the operation guidance (nP. 34). Press for 1+ seconds to display the phonebook entry screen (nP. 97).fi-Channel/Clear key c (J) Press to show the channel list (nP. 192). Press to return to the previous screen. Use to delete phone numbers and text.gPower/End key H Press for 2+ seconds to turn the power on/off (nP. 55). Use to end the function being used and return to stand-by display.dv55_E.book  31 ページ  2008年4月17日 木曜日 午後2時12分
32e02_dv55_7e.fm[32/58]Before Using the HandsethDial/Text entry keys 1 to 9, 0, *, # Press to enter a phone number or text. Press * for 1+ seconds to use the Public mode (Drive mode) (nP. 74). Press # for 1+ seconds to use the Manner mode (nP. 113). Press 1 to 3 for 1+ seconds to use assigned functions (nP. 393). Press 5 for 1+ seconds to set font size collectively (nP. 125). Press 6 for 1+ seconds to place the Bluetooth on stand-by (nP. 406). Press 7 for 1+ seconds to record Voice memos or play Voice memos/Recorded messages (nP. 79, P. 396). Press 8 for 1+ seconds to start to use 2in1 or switch modes (nP. 435, P. 436). Press 9 for 1+ seconds to reset Kisekae Tool settings (nP. 120).iMulti/GPS/Supportbook key $ Press to view Supportbook (nP. 46). Press to use Multi Assistant (nP. 382). Press for 1+ seconds to check your present location (nP. 266).jSpeakers Emits ring tones, music, etc. Emits the other party’s voice during hands-free operation.k/lCalled LED/Charging LED Flashes while receiving a call, etc. (nP. 123). Only l stays lit while charging (nP. 51).mShutter/PushTalk key < (q) Press to use the PushTalk phonebook (nP. 90). Press for 1+ seconds with the FOMA terminal closed to turn on/off the picture light. Press in the viewer position to activate the camera (nP. 151). Press for 1+ seconds in the viewer position to activate 1Seg (nP. 286).nFOMA antenna An antenna is built in. To speak in better conditions, do not cover the antenna area by hand.o1Seg antenna (nP. 283) Use to receive 1Seg.pCamera Use to shoot still pictures or movies (nP. 144). Use to send a camera image shot during a Videophone call to the other party (nP. 60).qPicture light Lights while activating the camera (nP. 151). Lights/Flashes during shooting (nP. 153, P. 155).rInfrared port Use for the Ir exchange (nP. 349). Use for the Ir remote control (nP. 353).sStrap ringtFeliCa mark The IC card is included (The IC card cannot be removed). Use Osaifu-Keitai holding the FeliCa mark up to the scanning device (nP. 255). Use to send and receive data via the iC transmission (nP. 354).uBack cover (nP. 50) A radio frequency-preventing sticker is attached on the back of the back cover. Do not peel off this sticker.dv55_E.book  32 ページ  2008年4月17日 木曜日 午後2時12分
33e02_dv55_7e.fm[33/58]Before Using the HandsetTo use the FOMA terminal, open it (normal position) or use it in the viewer position. When carrying, keeping the FOMA terminal closed as shown in the diagram for step 1 is recommended.■Viewer positionHow to open the FOMA terminal1Open carefully with both hands.2Open the display until it stops midway.3Rotate the display 180° to the right.4Flip the display forward.5Note Note the following when rotating the FOMA terminal display.Do not hit the key surface, etc. May damage the key surface (See “Cautions when rotating” above).Do not rotate in the opposite direction or further than 180°.Cautions when rotatingdv55_E.book  33 ページ  2008年4月17日 木曜日 午後2時12分
34e02_dv55_7e.fm[34/58]Before Using the HandsetUse to select or execute the menus that appear in the operation guidance. The following shows the keys allotted to select or execute the menus items that appear in the guidance.■Operation guidance menuIn the operation guidance, menus appear according to the used function and situation.The following table describes examples of the main operation guidance menus that appear.1Signal status When A appears, the handset is outside the service area or in a place with no signal. Signal icon can be changed (nP. 121).How to use the Multi-guide key and Operation guidance keyOK Sets the selected itemSubmenu Displays the SubmenuAgree Checks selected image, music, etc.Back Returns to the previous screenPlay/Stop Plays/Stops i-motion, music, etc.Full Displays selected images, etc. in full screenShow all Displays sorted files, etc. as a list1/1 or ZoomeDisplays selected images, etc. in actual/reduced sizeMail Displays the compose message screenSend Sends a messageCancelCancels the operation such as receiving a messageituCavmSelAll/ClrAll Selects/Disables all selectable items(Up to 50 items can be selected/disabled depending on the function)Page ▲/Page ▼Scrolls the display by pageClose Closes the Submenu, etc.Viewing the display]Indication of the signal strength]no pStrong Weak12345 789olkjihgfmtu v<a bp nq e d crzy w6xsdv55_E.book  34 ページ  2008年4月17日 木曜日 午後2時12分
e02_dv55_7e.fm[35/58]35Continued on next pageBefore Using the Handset2Battery level/Charging (nP. 54) Battery icon can be changed (nP. 121).3i-mode/Full Browser (nP. 170, P. 303)4SSL (nP. 171) When o appears while Multi Assistant is used, function such as i-mode, Full Browser, i-appli or Software update is being used with Multi Assistant.5i-appli (nP. 231)* Indicates that i-appli is set as the stand-by display, but cannot be used.6GPS (nP. 266, P. 273)7Shortcut menu (nP. 393)8i-mode mail/SMS/Area Mail received (nP. 205)9Message R/F (nP. 221) The status may not always be indicated even if messages are held at the i-mode center.amicroSD Card (nP. 332)bClock display (nP. 57) Small clock icon can be changed (nP. 121).c1Seg being recorded (nP. 291)dRecord message (nP. 77) When there are messages, D to P appears, indicating the total number of both types of messages. When there are three Record messages (voice calls) and two Record messages (Videophone), k appears."Battery level{Charging7 = A A B N OIndicates i-mode/Full browser statusoSSL compatible sites are viewedSSL compatible Internet web pages are viewedGi-appli is being activatedi-appli stand-by is being activatedNi-appli stand-by is set*Ii-appliDX is being activatedi-appliDX stand-by is being activatedQi-appliDX stand-by is set*A (blue)Location request menu is set to [Loc. provision:ON]Location request menu is set to [Permission sched.] and Location provision is permittedA (black) Location request menu is set to [Permission sched.] and Location provision is rejectedBGPS positioningmAppears when the function can be added to the Shortcut menuU h H v [Indicates the status of the i-mode mail/SMS/Area Mail receptionIndicates the status of the memory to store received mailABGISTz8<9>07!Indicates the reception status of the Message R/FIndicates the storage status of the Message R/F^ (gray) microSD Card is inserted^ (pink) microSD Card is being useda1Seg is being recorded]Record message is setdv55_E.book  35 ページ  2008年4月17日 木曜日 午後2時12分
36e02_dv55_7e.fm[36/58]Before Using the HandseteSilent (nP. 109)fVibrator (nP. 111)gManner mode (nP. 113)hPublic mode (Drive mode) (nP. 74)iStorage status of i-mode center (nP. 205)jIC card lock (nP. 263)kRestriction indicator (nP. 132, P. 138)lHands-free (nP. 61, P. 81, P. 87, P. 407)mAlarm (nP. 293, P. 294, P. 385, P. 390)* Appears only when an Alarm is set for that day.nMusic&Video Channel program reservation (nP. 365)oi-mode mail send reservation (nP. 204)pEarphone/microphone connection (nP. 401) Appears when Auto answer for PushTalk is set even if a flat-plug earphone/microphone with switch is not connected.qUSB mode (nP. 342)[The phone ring volume [Silent] is setbVibration mode is setZManner mode is set_Public mode (Drive mode) is setWMail being held at the centerXMail being held at the center fullHIC card is lockedRSecret mode is setSSecret data is being editedTKeypad dial lockUAll lock is setVFunction lock is setWKeypad dial lock and Function lock are setK (red) Secret mode, Function lock and Keypad dial lock are setK (blue) Side key guard, Secret mode, Function lock and Keypad dial lock are setXSide key guard is set; (red) Hands-free in progress; (green) USB hands-free in progresslMute in progress (only when rotated the display)MBluetooth hands-free in progress\Alarm is setSchedule alarm is set*Reception reserve alarm is set*Recording reserve alarm is set*Wakeup TV is set*0Appears 12 hours before Music&Video Channel program distribution=Mail with send reservation;Mail failed to be automatically sentsWhen voice/Videophone call in Auto answer setting is set to [ON] and while a flat-plug earphone/microphone with switch (sold separately) is connectedWhen PushTalk in Auto answer setting is set to [ON]xFOMA USB Cable with Charge Function 01/02 (sold separately) is connected in the Communication modedv55_E.book  36 ページ  2008年4月17日 木曜日 午後2時12分
e02_dv55_7e.fm[37/58]37Continued on next pageBefore Using the HandsetrFOMA card errorsSelf mode (nP. 134)tPushTalk (nP. 87)uBluetooth (nP. 404) The Bluetooth icon does not appear during SSL page display.vIr exchange/Bluetooth communication/External devicewVeilView (nP. 125) The VeilView icon does not appear during International roaming or while 1Seg is recorded.x3G/GSM (nP. 453)yStatus of Comics setting (nP. 359) Status of Comics setting icon does not appear during hands-free operation.zToruCa (nP. 257) The ToruCa icon does not appear during hands-free operation or e-comic display.<Multitask (nP. 382)Indicates functions that are running.RAppears when FOMA card is malfunctioning or not insertedBAppears when a card other than the FOMA card is insertedgSelf mode is setaDuring PushTalk transmissionLStand-by for Bluetooth registrationStand-by for Bluetooth connectionConnected to BluetoothJData is communicated with another device using the Ir exchange function (nP. 349)Data is sent using the Ir remote control (nP. 353)#Data is communicated with another device using the Bluetooth function (nP. 409)NConnected to commercially available Bluetooth compatible keyboard (nP. 408)t (green)Connected to an external device and transmitting packetst (red) Connected to an external device and sending/receiving packet datauConnected to an external device and transmitting 64K dataPVeilView is set4 (green) 3G network (Packet transmission available)4 (red) 3G network (Packet transmission not available)KGSM/GPRS network (Packet transmission available)JGSM/GPRS network (Packet transmission not available)IFrame display is setHPage display is setQUnread ToruCagFour or more applications are running2Camera (still picture)3Camera (movie)*Videophone 4Character reader (OCR)hVoice call 5Bar code readertPhonebook ]Card readerkPushTalk/PushTalk phonebookvVoice recorderwScheduledv55_E.book  37 ページ  2008年4月17日 木曜日 午後2時12分
38e02_dv55_7e.fm[38/58]Before Using the HandsetDisplay stock icons in stand-by when a call is missed or new mail is received. In stand-by, select stock icons to check notice details.Stock icon type#Modem transmission (appears during data transmission)yText memozCalculatoriSoftware update 6Manga&BookReaderCGPS =Quick search)Shotdeco nFull Browser, Internet movie player(Bluetooth functionjReceive via Ir exchange, iC transmission, USB and Bluetooth communication>ToruCa{Alarmli-appli 8Timermi-mode, i-Channel, WEB mail}microSD manager9General settingspMail, SMS, Message R/F, Check new message0Record message/Voice memo7Document ViewerqMail/Decome-Anime/SMS being composed"Own numberf1Seg|Received calls/Received messages history ^Reception reserve/Recording reserve alarm sounds!Redial/Sent messages history uData box, Music&Video ChannelNote microSD Card is referred to as [microSD] or [SD] on the FOMA terminal (nP. 332). Some of the screen shots in this manual have been modified or abbreviated. The display for the FOMA terminal is manufactured using high-precision technology, but it may occasionally contain dots that fail to light or that remains permanently lit. This is not a malfunction.Checking notices with stock iconIcon Message PageBxx missed call*1 P. 76FRecorded messages Fxx message/Axx message P. 79Exx voice mail*1 P. 427Cxx mail message*2P. 205, P. 227Lxx New Message R P. 222Qxx New Message F P. 222Dxx new ToruCa P. 2575New auto send result P. 2046Update complete P. 508Check update  P. 508Update required P. 505Check for updateP. 506DUSB mode setting  P. 342tDownload successful (Music&Video Channel) P. 365gDownload failed (Music&Video Channel) P. 365Stock iconMessageNumber of entriesdv55_E.book  38 ページ  2008年4月17日 木曜日 午後2時12分
39e02_dv55_7e.fm[39/58]Before Using the Handset*1 When the 2in1 mode is set to [Dual mode], the number of [A mode] and [B mode] appears each.*2 When the 2in1 mode is set to [Dual mode], the total number of [A mode] and [B mode] appears.*3 The message that appears differs depending on the menu screen.1In stand-by, a stock icon appears/t.2Select the stock icon/t. After the details are checked, the stock icon and message disappear.Use the Optical TOUCH CRUISER to perform the same operations as those for w of Multi-guide key (e.g. moving the cursor or scrolling the screen). Move the pointer or cursor just as covering the whole operating range of the Optical TOUCH CRUISER with finger. The pointer or cursor moves in conjunction with sliding of the finger.@Send loc - No resp P. 276Send loc - Resp P. 276Send loc - Failed P. 2764Charge limit exceeded P. 397GCustom menu/Basic menu/Menu*3 P. 45Note Stock icons do not appear while the i-motion set as stand-by is played or the i-appli stand-by is being activated. In the viewer position, the messages and the notice details can be checked by using Bluetooth compatible keyboard.Icon Message Page Optical TOUCH CRUISERNote In the following cases (screens), the Optical TOUCH CRUISER is not available. However, when the Submenu appears, the pad can be operated.Stand-by i-appli Dial input screenCharacter reader, Bar code reader, Card reader screenWhile making, receiving or during the voice call/Videophone call/PushTalk, etc.Operating range of Optical TOUCH CRUISERdv55_E.book  39 ページ  2008年4月17日 木曜日 午後2時12分
40e02_dv55_7e.fm[40/58]Before Using the Handset■Moving the pointerIn the Custom menu screen or while i-mode or Full Browser is connected, move the pointer (L, M, K, etc.) up/down, left/right or diagonally to select an item. In some Custom menus, the pointer shape varies or the pointer is not supported. Move the pointer to the edge of the screen while i-mode or Full Browser is connected to show G, R/\, Z and scroll the screen to the direction of the arrow. If Link is set, M appears, and press t to move to the linked page. The pointer moving speed varies depending on the finger sliding speed.■Moving the cursorIn the Basic menu or Submenu, move the cursor up/down and left/right in the same way as w of Multi-guide key. When there are multiple pages, move the cursor to switch the pages.■Setting whether to use the Optical TOUCH CRUISER1In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]/[Usage settings].2Select the setting/t.■Setting the pointer speed/scroll speed1In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set].2Select an item/t.3Select the speed/t.When using the Optical TOUCH CRUISER Do not operate the Optical TOUCH CRUISER using a pointed metallic object such as a pen tip. May cause scratches or a failure of the sensor. Note that putting a sticker, etc. to the operating range may cause a malfunction.e.g.) Custom menu screene.g.) Basic menu screenSetting the Optical TOUCH CRUISER <TOUCH CRUISER set>dv55_E.book  40 ページ  2008年4月17日 木曜日 午後2時12分
41e02_dv55_7e.fm[41/58]Before Using the HandsetIf the screen is switched from the normal position to the viewer position, operate by putting your finger on the touch panel (screen). The operations differ depending on the function and screen in use. When the touch panel is touched, the tone sounds and the vibrator is activated (excluding while activating a camera (still picture/movie)).• For details on setting the volume nP. 110• For details on setting the vibrator nP. 111• The tone cannot be changed.■Selecting keysIn the touch menu, control keys and others, touch the displayed keys to select it.■Selecting data and itemsIn list and data list screens, select the data or items by touching, moving the cursor and re-touching them. When scrolling the screen or when switching the page in the folder list screen or the data list screen, slide the finger up/down or touch A/B at the bottom of the screen to move pages.■Canceling the selectionWhen having touched data by mistake, keep the finger on the touch panel and slide it away from the selected data to cancel the selection. Touch the “CLR” key to return to the previous screen.Touch panelNote The message indicating the operation is not available appears when the touch panel cannot be used.Example: SelectingTouch the touch panel.Example: Adjusting the zoomTouch the touch panel and slide the finger left/right. Other than the viewer position, the touch panel is available in the following cases.During Videophone (nP. 81)During Writing authentication entry (nP. 130)When using the touch panel This product is designed to be operated with one finger. In the following cases, the touch panel is not activated.When operated with a gloved fingerWhen operated with two or more fingersWhen operated with a fingernailWhen operated with a pen, ballpoint pen, pencil, etc.When operated with foreign objects placed on the operation pad Note that the following cases may cause a malfunction.When operated with a wet fingerWhen operated with the touch panel pressed forcefullyWhen putting a sticker to the touch panel (display)dv55_E.book  41 ページ  2008年4月17日 木曜日 午後2時12分
42e02_dv55_7e.fm[42/58]Before Using the HandsetThe following functions can be activated from the touch menu.Full Browser 1Seg Camera MailManga&BookReader Data box For details on touch menu nP. 46, P. 476Set or change the channel using the control key while the camera is activated, 1Seg is watched, etc. Touch the touch panel and the control key appears. If no operations are performed for approximately 6 seconds with the control key shown, the control key disappears. Also, touch other than the control key to hide the control key (excluding 1Seg). For Full Browser, touch D and the control key appears. Touch the display area other than control keys to hide. When the control keys appear, only those are available. However, in the camera (still picture/movie) shooting screen, adjusting the brightness and digital zoom are available by using the touch panel even while the control keys are displayed. ■Using the control keysThe control key appears when the following functions are activated.Common keys for all functions*1 While multiple windows are displayed in Full Browser, close the displayed window.*2 This key does not appear when there is no extra key. While the camera (still picture/movie) is activated*1 Touch after selecting the size (For still pictures, QCIF: 176×144 cannot be selected).*2 Select a mode from < (Standard)/| (Def (people first)) (only for still pictures)/> (Spot AF) (only for still pictures)/{ (Closeup)/} (Manual focus) to touch. •When | is touched, touch the face detection frame and adjust the focus.• When > is touched, touch the focus area and adjust the focus.• When } is touched, touch the touch panel, slide the finger left/right and adjust the focus.*3 White balance appears only for still pictures, and the Common replay mode appears only for movies.*4 Appears even in the movie shooting screen. The settings other than AF mode and image size change each time the key is touched. In the preview screen after shooting, the following keys appear.*1 Only still picture is displayed.*2 Only movie is displayed.While 1Seg is being watchedTouch menuControl keyE/T*1 To end the running function/return to a data list screenFTo view the following keys*29To return to previous Control keyJImage size*1 PFix camera shakeGAF mode*2 HTo zoom in*4KPicture light ITo zoom out*4QShoot by scene RSwitch phone#SDNWhite balance*3 LTo turn up the brightness*4OCommon replay mode*3 MTo turn down the brightness*4RSwitch phone#SD*1 UTo play*2STo save 9To deleteVTo turn up the volume*ZTo select a station with DOWNWTo turn down the volume*[To select a station by searching a frequency (UP)dv55_E.book  42 ページ  2008年4月17日 木曜日 午後2時12分
43e02_dv55_7e.fm[43/58]Before Using the Handset* Keep key touched to adjust the volume continuously.While an image is displayed from My picture/1Seg of Data box For JPEG images, ( (zoom in)/) (zoom out) appears when touching = which is displayed at the bottom of the screen simultaneously with the control key.• In the image display screen, which was zoomed up by touching (, touch the touch panel and slide the finger up/down/left/right to change the display position.While i-motion is displayed from i-motion of Data box/While a video is played back from 1Seg of Data box*1 Keep key touched to adjust the volume continuously.*2 Appears only for i-motion.*3 Appears only for video.While e-book, etc. is displayedWhile Full Browser is displayed*1 Touch the history screen on the right/left or touch the touch panel and slide the finger right/left to move the cursor to next/previous history in the Visual history screen.•Touch the tab on the upper part of the screen or touch the touch panel and slide the finger up/down to switch windows in the Visual history screen.*2 Touch #/$ or touch the touch panel and slide the finger right/left to view the next/previous page in the Bookmark list screen.*3 Check the site URL, touch [OK], select a folder and touch it to save to bookmark.*4 x (Keitai mode) and y (PC mode) are switched. Zoom bar appears at the bottom of the screen simultaneously with the control key. Touch the slider of zoom bar and slide the finger left/right or touch +/- on the both ends of the zoom bar to zoom up/down the screen.While a PC movie is played back* Keep key touched to adjust the volume continuously.While a message details screen is displayed*1 Does not appear when there is no next/previous mail or message and unread mail.*2 Appears only for Decome-Anime.*3 Appears only for received mail.XTo display ChannelView \To select a station by searching a frequency (DOWN)YTo select a station with UPaTo rotate (excluding Flash movie)1To retry (Flash movie)gTo play/stop (Flash movie) ]To nextbTo display in actual size/full screen (excluding Flash movie)^To previousVTo turn up the volume*1 hTo fast forward*3WTo turn down the volume*1 kTo previous*2gTo pause/play iTo fast rewind*3jTo next*2cTo return to the previous line/frame 5To the top pagedTo go to the next line/framemTo cancel connection oTo save Bookmark*3zVisual history*1 xDisplay Mode*4nTo view Bookmark list*2gTo pause/play WTo turn down the volume*VTo turn up the volume*]To the next mail/message*1 rTo the next unread mail*1, 3^To the previous mail/message*1 sTo the previous unread mail*1, 39To play Decome-Anime*2, 3dv55_E.book  43 ページ  2008年4月17日 木曜日 午後2時12分
44e02_dv55_7e.fm[44/58]Before Using the HandsetSet, change or save functions from the menu screens.Set the start menu that displayed when t is pressed in stand-by.1In stand-by, press t/[Settings]/[Disp/LED/Power saver]/[Menu priority]. In the Custom menu/Basic menu: Press C/[Menu priority].2Select the start menu/t/[Yes].■Switching the set start menu temporarilySwitch the start menu temporarily. When the stand-by display reappears, the start menu returns to the one set in Menu priority.Use the Shortcut menu to retrieve saved functions quickly. Other functions can also be saved in the Shortcut menu (nP. 393).Menu settings and selectionsThe explanations in this manual are based on how to retrieve a function from the Custom menu.Setting the start menu <Menu priority>Start menu CharacteristicsCustom menuThe preset Kisekae Tool (nP. 119) can be selected and set. Each Kisekae Tool consists of different functions and designs. Kisekae Tools can be downloaded from sites and used.Preset Kisekae ToolsWhite Black Pink Blue拡大メニュー (Large) シンプル (Simple)ダイレクトメニュー※Preset Kisekae Tools differ depending on the FOMA terminal handset color.Basic menu In the Basic menu, input the function number, which is assigned to each function, to quickly retrieve the function to be used. Assigned function numbers nP. 458Stand-bytShortcut menuaBasic menuCustom menuodv55_E.book  44 ページ  2008年4月17日 木曜日 午後2時12分
45e02_dv55_7e.fm[45/58]Before Using the Handset For details on the available functions nP. 458 Use w and the Optical TOUCH CRUISER in either start menu. Press the dial key corresponding to the menu item number (U, V, W, etc.) to select a function. However, in the Custom menu, a function may not be selected by using the menu item numbers. The method for selecting functions may differ depending on the Kisekae Tool set for the Custom menu. Press c to re-select a function, and the previous screen reappears. Press H to return to stand-by.■Retrieving from the Custom menuExample: Activating 1Seg with Multi guide key or Optical TOUCH CRUISER For the ,, use the Optical TOUCH CRUISER to select an item. The following shows the screen operated with the Optical TOUCH CRUISER.■Retrieving from the Basic menuExample: Activating 1Seg by entering function numbersRetrieving a function from each start menuWhen a stock icon (nP. 38) appears in stand-by, select G to show the start menu.,tCustom menu When [1Seg] is displayed When 1Seg is activated,tor wtor wtNote When the Custom menu image is changed by Kisekae Tool, the operation may differ from the description in this manual. In this case, switch the menu screen to the Basic menu (nP. 44) or perform Reset menu screen (nP. 120).Basic menu When 1Seg isactivated961dv55_E.book  45 ページ  2008年4月17日 木曜日 午後2時12分
46e02_dv55_7e.fm[46/58]Before Using the HandsetIf the screen is switched from the normal position to the viewer position in the stand-by display, Custom menu, Basic menu, Shortcut menu or others, the touch menu appears. When the stand-by display appears in the viewer position, touch the touch panel to show the touch menu. Touch the touch panel to select a menu. Available functions to select from the touch menu are limited (nP. 476). The images and items in the touch menu cannot be changed. Touch the “CLR” key to return to the previous screen and re-select the function.Example: Activating 1Seg by touching the touch panelUse this function for unsure operations. After the Supportbook appears, check the explanation and operation procedures of each function. In addition, directly start functions that were looked up in the Supportbook.1In stand-by, press $.2Select a menu or item/t.Menu (touch menu) when in the viewer positionWhen 1Seg is activatedTouch menuSupportbookDisplaying the SupportbookRelated OperationsStart functions directly from the SupportbookIn the details screen, select the function to start/t/[Yes].dv55_E.book  46 ページ  2008年4月17日 木曜日 午後2時12分
47e02_dv55_7e.fm[47/58]Before Using the HandsetA FOMA card is an IC card that records personal information, such as phone numbers. A FOMA card can store phonebook data and SMS. By switching FOMA cards, multiple FOMA terminals can be used for different purposes as needed. If a FOMA card is not inserted, transmission functions such as voice/Videophone calls, PushTalk transmission, i-mode, mail transmission and packet transmission are not available on the FOMA terminal. In addition, 1Seg cannot be watched. Before inserting or removing the FOMA card, turn off the power, position the back facing upwards and remove the battery pack. Close and hold the FOMA terminal firmly with your both hands.■Inserting1Hook a finger on the tab and pull the tray out (1). Pull out the tray straight until it stops.2Hold the FOMA card with the IC facing up and set on the tray (2).3Push the tray all the way in (3).■Removing1Hook a finger on the tab, pull the tray out (1) and remove the FOMA card (2). Do not allow the FOMA card to fall when removing it.The FOMA card has a “PIN1 code” and a “PIN2 code”.Both are set to [0000] by default but can be changed to a four- to eight-digit number by the user (nP. 131).FOMA cardUsing a FOMA cardInserting and removingNotchIC (gold)2Tray3Fit the notch of the FOMA card to that of the tray.1TabNote Inserting or removing the FOMA card forcibly may damage the card or deform the tray. Use caution. Refer to the FOMA card user’s guide for more information on the FOMA card. Do not misplace the FOMA card once it is taken out. When the tray falls off, slide the tray in straight along the guide rail.Security codes12dv55_E.book  47 ページ  2008年4月17日 木曜日 午後2時12分
48e02_dv55_7e.fm[48/58]Before Using the HandsetThe FOMA terminal has built-in FOMA card security functions (FOMA card restriction functions) as functions for protecting personal data and files. When the FOMA card is inserted into the FOMA terminal and data or files are retrieved using any of the following methods or when i-appli is running, FOMA card security functions are automatically set in the retrieved data or files.When a file such as an image, melody or PDF is downloaded from a site or Internet web pageWhen a site or Internet web page is saved as a screen memoWhen i-mode mail with a file attached is receivedWhen i-appli is running Data, files or software with FOMA card security functions run only when in use with the FOMA card inserted at time of acquisition. Display, play, attach to i-mode mail, run software, send data using Ir function and iC transmission function, and copy to microSD Card can be executed. The following indicates the data for which FOMA card security is set.File attached to i-mode mail other than the following• ToruCa  ・Phonebook ・Schedule•Bookmark ・Documents※“Chaku-uta” is a registered trademark of the Sony Music Entertainment (Japan) Inc. The following indicates the settings saved in FOMA card. The above operations cannot be performed if the FOMA card inserted at time of data/file retrieval or i-appli startup is replaced with a different FOMA card. Explanation that follows refers to the FOMA card inserted at time of data/files retrieval as “one’s own FOMA card” and other FOMA cards as “another’s FOMA card”.FOMA card security functions <FOMA card security functions>Melody Image (including animation and Flash movie)Screen memo Chaku-uta®/Chaku-uta full®Chara-den File attached to Message R/Fi-motion ToruCa (details) imagePDF data Image inserted to Deco-mail or signatureKisekae Tool Videophone picture memoMachi-chara i-appli (including i-appli stand-by)Download dictionaryContents transfer compatible dataImage in Message R/FMusic&Video Channel programDeco-mail template with data which FOMA card security functions are setDecome-Anime Templatee-book/e-dictionary/e-comic saved in the [Comic] folderOwn number PIN settingSelect language SSL certificatesSMS center SMS expirySMS input characterOne’s own FOMA card security functions are set for downloaded data, files attached to received mail and i-appli that have been run, allowing viewing and playback of data.When another’s FOMA card is inserted, data with one’s own FOMA card security functions set cannot be viewed or played back.One’s own FOMA cardAnother’s FOMA cardDifferent FOMA card inserteddv55_E.book  48 ページ  2008年4月17日 木曜日 午後2時12分
49e02_dv55_7e.fm[49/58]Before Using the HandsetNote the following differences between “FOMA card (blue)” and “FOMA card (green/white)” used on the FOMA terminal.Note When one’s own FOMA card is replaced with another’s FOMA card, the data or files for which FOMA card security functions are set cannot be set as stand-by displays or ring tones. When a FOMA card is replaced with another’s FOMA card, FOMA card security functions are activated and if data or file retrieved from a site is set as the stand-by display or ring tone, the setting is reset to the default. When one’s own FOMA card is re-inserted, the setting returns.Example: When setting [Melody A], for which FOMA card security functions are set, as a ring toneWhen one’s own FOMA card is taken out or is replaced with another’s FOMA card, ring tone returns to default setting. When one’s own FOMA card is put back, the ring tone returns to [Melody A]. FOMA card security functions cannot be set for data received using Ir exchange or data transmission functions, and still pictures/movies, etc. shot with the FOMA terminal. It is possible to move or delete data or files for which FOMA card security functions are set even when another’s FOMA card is inserted. Running i-appli by selecting highlighted text in i-mode mail details screen cannot be performed or retrieved when FOMA card security functions are set. If the FOMA card is replaced with another’s FOMA card after i-appli stand-by is set, the set i-appli cannot be activated in stand-by, and the image set in Stand-by display appears.FOMA card typeFunction FOMA card (blue)FOMA card (green/white)PageNumber of phone number digits available in the FOMA card phonebook Up to 20 digits Up to 26 digits P. 97Client certificate operations for FirstPass Not available Available P. 188Use of WORLD WING Not available Available P. 448Service number Not available Available P. 433About WORLD WINGWORLD WING is a DoCoMo FOMA international roaming service that makes it possible to use the mobile phone number registered in Japan to make and receive calls even overseas by the FOMA card (green/white) and supported FOMA terminal. If subscribed to the FOMA service after September 1, 2005, subscription for “WORLD WING” is not required. However, if subscription for “WORLD WING” is canceled at or after subscription for the FOMA service, subscription for “WORLD WING” is required again. If subscribed to the FOMA service before August 31, 2005 but not subscribed to “WORLD WING”, subscription for “WORLD WING” is required. Some payment plans are not available. When the FOMA card (green/white) is lost or stolen overseas, promptly contact DoCoMo and conduct a procedure for canceling the use of service. Refer to General Inquiries on the back of this manual for inquiries. Note that transmission/calling charges after the FOMA card is lost or stolen are incurred to the subscriber.dv55_E.book  49 ページ  2008年4月17日 木曜日 午後2時12分
50e02_dv55_7e.fm[50/58]Before Using the HandsetUse the battery pack SH17 exclusive to the FOMA terminal. Turn off the power, close the FOMA terminal, and hold it in your both hands before inserting or removing the battery pack.■Inserting1Lightly push the back cover in the direction of the arrow (1), slide approximately 2 mm (2) and remove the back cover (3).2Insert the battery pack (4). The battery pack has tabs that make it easy to insert. Attach the battery pack with a recycle mark side faced up.3Reattach the back cover (5). Position the back cover as shown in the illustration and then push the back cover and slide into place.■Removing1Follow step 1 of “Inserting” to remove the back cover.2Remove the battery pack. The battery pack has a tab that makes it easy to remove. Press the tab with your fingers without placing too much force. Lift the battery pack to remove.Inserting and removing the battery pack132Face the side with a recycle mark up4TabsTabs Battery packBattery pack connector terminal sideNote Using unnecessary force when inserting or removing the battery pack may damage the connector terminal for the battery pack (charger terminal) on the FOMA terminal. Firmly close the back cover. If not closed firmly, the back cover may come off and the battery pack may fall out due to vibration.5Tabdv55_E.book  50 ページ  2008年4月17日 木曜日 午後2時12分
51e02_dv55_7e.fm[51/58]Before Using the HandsetThe battery pack is not fully charged at the time of purchase. Be sure to charge the battery using the exclusive AC or DC adapter (sold separately) before use.■Estimated charge times and LED displayThe following figures are estimated times for charging an empty battery pack with the FOMA terminal turned off. Charging LED illuminates in red when charging and turn off when charging is completed. Check that the battery pack has been properly inserted when charging LED flashes red. The LED also flashes red when the battery pack has reached the end of its service life. The battery pack can also be charged with the FOMA terminal turned on ({ on the display flashes during charging). When charging is complete, charging LED turns off, and { on the display changes to ". When the battery becomes warm, charging may automatically stop even if the battery has not been fully charged. Charging resumes after the temperature lowers to an appropriate temperature. While charging is stopped, charging LED turns off ({ on the display flashes while stopped).■Estimated times of use when fully charged Continuous talk time is estimated as the usage time at normal transmission signal strength, and continuous stand-by time is estimated as the usage time while moving with the FOMA terminal folded at normal signal strength. Talk/stand-by time may be reduced by about half depending on conditions including battery level status, stand-by display, Power saver mode, Missed call notice and New unread mail notice settings, temperature and other environmental conditions, and signal strength (no signal or weak signal). Using i-mode reduces talk (transmission)/stand-by time. When i-Channel is subscribed, information is automatically received and updated, so talk (transmission)/stand-by time will be reduced. In addition, when shooting or editing an image, watching 1Seg, composing i-mode mail, activating the downloaded i-appli or the i-appli stand-by, or using MUSIC Player or Bluetooth function, the talk (transmission)/stand-by time will be shorten even if calls or i-mode transmission are not made. Some i-appli software may continue transmission even after downloading. To avoid this, set not to connect in advance. The actual usage time is a combination of stand-by time and talk time, and the longer the talk time, the shorter the stand-by time becomes. 1Seg watching time depends on conditions including battery level status, functions used, temperature and other environmental conditions.ChargingCautions when chargingFOMA AC Adapter 01/02 Approx. $$ minFOMA DC Adapter 01/02 Approx. $$ minContinuous talk time FOMA/3G Voice call: Approx. $$ minVideophone call: Approx. $$ minGSM Voice call: Approx. $$ minContinuous stand-by timeFOMA/3G 3G/GSM setting: 3G When mobile: Approx. $$ hr3G/GSM setting: AUTO When mobile: Approx. $$ hrAt rest: Approx. $$ hrGSM 3G/GSM setting: AUTO At rest: Approx. $$ hr1Seg watching time Approx. $$ mindv55_E.book  51 ページ  2008年4月17日 木曜日 午後2時12分
52e02_dv55_7e.fm[52/58]Before Using the Handset■Battery pack service life Battery pack is a consumable product. Service time per charge is gradually reduced every time the battery is charged. When service time per charge is reduced to about half of the default time, this means that the battery pack is approaching the end of its service life. In such a case, it is recommended to replace the battery pack as soon as possible. Depending on usage, the battery pack may swell as it approaches the end of its service life but this will not cause problems. If i-appli, Videophone, or 1Seg is used while charging for a long time, the service life of the battery pack may become shorter than estimated. To protect the environment, return used batteries to NTT DoCoMo, any DoCoMo retailer, or a recycling agency.■About charging batteries Refer to user’s guide of FOMA AC Adapter 01/02 (sold separately), FOMA AC Adapter 01 for Global use (sold separately), or FOMA DC Adapter 01/02 (sold separately). FOMA AC Adapter 01 covers only 100 VAC. FOMA AC Adapter 02/FOMA AC Adapter 01 for Global use covers from 100 VAC to 240 VAC. The shape of the plug for the AC adapter is for 100 VAC (for domestic use). To use the AC adapter of 100 VAC to 240 VAC overseas, a conversion plug adapter that is compatible with the voltage of your country of stay is required. Do not use a transformer for use overseas to charge the battery.■Cautions when charging Do not charge for long periods of time with the power left on. If the FOMA terminal is left on after charging is complete, the battery pack charge decreases. In such cases, the AC or DC adapter charges the battery again. However, depending on when the FOMA terminal is disconnected from the AC or DC adapter, the battery charge level may be low, the battery alert tone may sound, or the battery may only be usable for a short time. When the battery is empty and terminal is recharging, charging LED may not illuminate immediately. If the alert tone sounds and the power cannot be turned on, charge the battery for a while. If the battery empty alert is displayed and charging begins within 60 seconds of the alert tone, the status returns to normal. While charging, terminal may not turn on even when charging LED is illuminated in red. Charge longer and try turning power on again. Frequently recharging the battery when its power is still remaining enough may shorten the life of the battery pack. It is recommended to use the battery to a certain level before recharging. The battery pack cannot be charged by itself.[Read “FOMA AC adapter 01/02 (sold separately) and FOMA DC adapter 01/02 (sold separately) user’s guide” carefully.] Battery pack can be charged with FOMA terminal open or in the viewer position.1Open the external connector terminal cover (1) and insert the AC or DC adapter connector horizontally into the external connector terminal (2). Check the direction (see diagram) of the connector, keep it parallel with the FOMA terminal and firmly push all the way in until it clicks.Charging using the AC adapter/DC adapterConnector (Face the side with the arrows up)2Release buttons1External connector terminal coverCharging/Called LEDExternal connector terminaldv55_E.book  52 ページ  2008年4月17日 木曜日 午後2時12分
e02_dv55_7e.fm[53/58]53Continued on next pageBefore Using the Handset2When insert the AC adapter power plug into an outlet or insert the DC adapter power plug into a car cigarette lighter socket, charge start sound is heard, charging LED illuminates, and charging starts.3When Charge end sound is heard and charging LED turns off, charging is complete. When removing the connector, always hold the release buttons on both sides (1) and unplug it by pulling out horizontally (2).[Read “Desktop holder SH19 (sold separately) user’s guide” carefully.] Battery pack can be charged in the viewer position. Charging is not available with the FOMA terminal open.1Face the side with the arrows of the AC adapter connector up and insert it into the connector terminal of the desktop holder. Keeping the connector parallel with the desktop holder, firmly push it all the way in until it clicks.2Insert the AC adapter power plug into an outlet.Note Do not forcibly insert or remove. May cause damage to the external connector terminal and the connector.100 VAC outletFor AC adapter2For DC adapterCigarette lighter socket2121 Pull the adapter out of the outlet or cigarette lighter socket if it will not be used for a long time. Do not forcefully pull the external connector terminal cover. May damage the cover. Do not place objects near the FOMA terminal when charging. The FOMA terminal may be damaged. In addition, a display may be damaged when charged in the viewer position.When using a DC adapter The DC adapter should only be used in negative grounded vehicles (12 and 24 VDC). Do not use with the car engine shut off. May drain the car battery. The DC adapter fuse (2A) is a consumable. For replacement, purchase a new fuse at a local automobile supply shop. Refer to the FOMA DC Adapter 01/02 user’s guide for details.Charging using the desktop holderdv55_E.book  53 ページ  2008年4月17日 木曜日 午後2時12分
54e02_dv55_7e.fm[54/58]Before Using the Handset3Place the FOMA terminal into the desktop holder. Charge start sound is heard, Charging LED illuminates, and charging starts. Keeping the connector parallel with the desktop holder as shown below, firmly push it all the way in until it clicks. Do not open the FOMA terminal with the terminal placed in the desktop holder.4When Charge end sound is heard and charging LED turns off, charging is complete. Hold the desktop holder and lift the FOMA terminal out.3Connector(Face the side with the arrows up)12FOMA AC Adapter 01/02100 VAC outletCharging/Called LEDNote Pull the AC adapter out of the outlet when left unused for a long period of time. When Charge start sound is not heard or when charging LED does not illuminate, check that the FOMA terminal is placed securely in the desktop holder (except when terminal is turned off, Manner mode is set or Charge start sound is Silent). When placing the FOMA terminal in the desktop holder, be careful that the strap is not caught in between the handset and the desktop holder.Battery levelHow to check the battery levelMaking the desktop holder stand upMake the stand behind the desktop holder stand up so that charging becomes available with the desktop holder stood up. Do not force to make the stand behind stand up."Battery level is still sufficient.#Battery level is low.$Battery is almost empty. Charge the battery.%Battery is empty (Power will turn off soon).{Battery pack is being charged.dv55_E.book  54 ページ  2008年4月17日 木曜日 午後2時12分
e02_dv55_7e.fm[55/58]55Continued on next pageBefore Using the Handset1In the Custom menu, select [Settings]/[General settings]/[Check status]/[Battery level]. Wait approximately 2 seconds and the display disappears. The battery level sound is heard at the volume set in Key/Standby i-motion (nP. 110).[Battery empty. Unsaved data will be lost. Ending current operation] appears if battery starts to run out (Press t to clear the message). After a while, an alert tone sounds. The warning screen stating that the battery runs out appears, handset operations are disabled and power turns off after approximately 60 seconds. During a voice/Videophone call, the alert tone sounds and [Battery empty. Unsaved data will be lost. Ending current operation] appears. The call is disconnected after approximately 20 seconds. At the same time, the screen above appears and after approximately 60 seconds, the power turns off. Alert tone does not sound when Manner mode or Public mode (Drive mode) is set (Alert tone sounds during a call).1Press H (for 2+ seconds). It may take some time for the wakeup screen to appear. The wakeup screen appears followed by the initial settings screen. Proceed to Initial setting (nP. 56). If initial settings have been completed, the screen shown on the right appears when power is turned on. This screen is called the “stand-by display”.Welcome mail “Welcome$SH906i%&” is saved by default. To check a welcome mail: In stand-by, press t/select the stock icon C (mail message)/t.• For details on the following operations nP. 2091Press H (for 2+ seconds). It may take some time for the power to be turned off (The end screen appears on the display until the power is turned off).Checking the battery level with sound and displayGraphicSound Three beeps Two beeps One beepStatus Battery is sufficiently full. Battery is running low.Battery is almost empty. Charge the battery.If the battery runs outPower ON/OFFTurning the power on and offTurning the power onTurning the power offInitial settings screenStand-by displaydv55_E.book  55 ページ  2008年4月17日 木曜日 午後2時12分
56e02_dv55_7e.fm[56/58]Before Using the Handset1In the Custom menu, select [Settings]/[一般設定]/[Bilingual]/[English]. To switch the display language from English to Japanese: In the Custom menu, select [Settings]/[General settings]/[Select language]/[日本語].The initial settings screen appears automatically when the power is turned on for the first time. Each setting item can also be set from Menu (When the initial settings are complete, the stand-by display appears). When items that have not been set remain, the setting screen appears every time the power is turned on.1Set the date and time (nP. 57). Set the date and time from 00:00 January 1, 2001 to 23:59 December 31, 2050.2Register a terminal security code (nP. 129).3Set the Key/Standby i-motion (nP. 110).4Set GPS Location provision ON/OFF (nP. 273).5Set the font size (nP. 124). When the initial settings are complete, the software update function confirmation screen appears. Read the description and select [Agree] (When the initial settings are made from the menu or the software update is set to other than [auto-update], the confirmation screen does not appear).Note If initial settings are not yet completed, the setting screen appears every time the power is turned on. If the FOMA card is not inserted, [Insert UIM] and a FOMA card error appear (nP. 37). When [Enter PIN1 code] appears, enter the PIN1 code (nP. 131). When a FOMA card is replaced with a new card, the terminal security code (four to eight digits) must be entered after turning on the terminal. If a correct terminal security code is entered, stand-by display appears. When a wrong terminal security code is entered five times, the power is turned off. However, turning on the power again is possible. When A appears, the handset is outside the service area or in a place with no signal. Move to a place where the icon disappears.Select languageSwitching the display to EnglishNote If a FOMA card is inserted, settings are saved to the FOMA card as well. When the setting of the FOMA terminal handset and the setting of the inserted FOMA card are different, the setting in the FOMA card is prioritized.Initial settingMaking the initial settingDate and time settings Change terminal security codeKey/Standby i-motion Location provisionFont size settingsNote Press H to cancel the initial settings.dv55_E.book  56 ページ  2008年4月17日 木曜日 午後2時12分
e02_dv55_7e.fm[57/58]57Continued on next pageBefore Using the HandsetSet the date and time on the FOMA terminal. Set to automatically correct the date and time.1In the Custom menu, select [Settings]/[General settings]/[Date settings].2Select the [Auto time correction] field/t/select the setting.Select [ON]/i.Select [OFF]/select the [Date] field/t/enter the date/t/select the [Time] field/t/enter the time (24-hour format)/t/i. When entering month, day and time, add 0 before numbers one through nine (example: 01, 02, 03, etc.).Date settingsSetting the date and timeNote The date and time that are set are saved even if the battery pack is removed, but if the battery pack remains removed for approximately a week or more or the battery remains empty, the settings may be reset. When this happens, set again after charging the battery. If the date and time are not set correctly, the following functions cannot be used properly.Redial, Received calls Auto power ON/OFFAlarm ScheduleSSL (authentication) i-appli Auto startStarting i-appliDX Reception, RecordingMachi-charaRecord message (voice), Record message (Videophone calls)Camera image titles/shooting datePlayback or view of i-motion/music data/e-comic with replay restrictionsWhen Auto time correction is set to [ON] The FOMA automatically adjusts the time by connecting to the DoCoMo network’s time information. When time difference is adjusted, [Time adjusted] appears. When Auto time correction is set to [ON], the time is sometimes not adjusted for a while. To activate Auto time correction, turn off FOMA terminal power and restart. Time is not adjusted depending on the signal status. Time may be off by a few seconds. When time difference is adjusted overseas, the local time and date and ! appear in Redial, Received calls, Received/Sent messages history (SMS only), and Received/Sent messages list. The received/sent messages are not displayed in order of the displayed time and date but the mail reception/send. ! does not appear in the Unsent messages for mail messages. If the date order display is set for the Unsent messages, unsent messages are displayed in the order of the displayed time and date. Time correction may not be performed depending on the overseas network.dv55_E.book  57 ページ  2008年4月17日 木曜日 午後2時12分
58e02_dv55_7e.fm[58/58]Before Using the HandsetDisplay your number (caller ID) on the other party’s phone (display) when making a voice/Videophone call or transmission PushTalk. Handset number (caller ID) is important personal information. Be very careful about your caller ID setting. The Notify caller ID function is available only on compatible phone devices.1In the Custom menu, select [Settings]/[NW Services]/[Notify caller ID]/[Notify caller ID].2Select the setting. To notify caller ID: Select [Yes]. To not notify caller ID: Select [No].1In the Custom menu, press 0. During overseas use, Japan time and local time (or time set in City) appear in the dual display except for the following cases.When Auto time correction is set to [ON] and time correction information is not being received from an overseas networkWhen Auto time correction is set to [OFF] and City is set to the city in the same time zone as JapanRelated OperationsChange the time zone manually <City>In the Date settings screen, select the [Auto time correction] field/t/[OFF]/C/select a time zone/t/select a city/t/i.Notify caller IDSending your own phone number to the other partySetting up Notify caller ID/No caller ID in advanceNote Notify caller ID cannot be set from outside the service area.Related OperationsCheck the Notify caller ID settingIn the Custom menu, select [Settings]/[NW Services]/[Notify caller ID]/[Check setting].Own numberChecking your phone numberNote When a change for the Number B of 2in1 or a FOMA card exchange (2in1 subscriber b 2in1 subscriber) is performed, use any of the following methods to obtain the correct Number B.Set 2in1 function OFF and then perform 2in1 setting again to set 2in1 function ONCheck the 2in1 subscription When a FOMA card exchange (2in1 subscriber b 2in1 nonsubscriber) is performed, set 2in1 function OFF.Related OperationsShow a phone number during voice callDuring a voice call, press C/[Own number].Show a phone number during a Videophone callDuring a Videophone call, press C/[Own number].In the Dual mode (while using 2in1), switch between own numbers of Number A and Number B In the Own number screen, press i.dv55_E.book  58 ページ  2008年4月17日 木曜日 午後2時12分
e16_dv55_7e.fm[353/362]353Continued on next pageData Display/Edit/ManagementDuring Ir exchange, if a signal to activate i-appli is received from devices supporting Ir exchange, software can be activated.1In the Custom menu, select [LifeKit]/[Receive Ir data]/[Receive]/[Yes]. The FOMA terminal waits to receive data. Software is activated when signal to activate i-appli is received from the sender’s FOMA terminal.Use the FOMA terminal’s Infrared port from i-appli software to operate equipment supporting the infrared remote control such as TVs and VCRs. To use the infrared remote control function, download compatible i-appli software.Start i-appli software that supports Ir remote control functions, point the FOMA terminal’s Ir port to the front of the remote control sensor on the TV, VCR or other device to operate, and perform remote control operations. Actual operational methods will differ with each i-appli software application. Control devices from a distance of up to approximately 4 m (Distance will vary depending on the device, the ambient brightness and other factors).Use iC transmission to send and receive data to and from other FOMA terminals which also support iC transmission function.Activating i-appli from Ir exchangeNote When i-appli To is set to [No], i-appli is not activated from Ir exchange. Cannot be activated as i-appli stand-by.Infrared remote controlUsing the infrared remote control functionRemote control operationNote When in the Self mode, the Ir remote control function cannot be used. Depending on the device, operation may not run properly. Remote control operation may not run properly directly under fluorescent lights, near other equipment using infrared signals, or in areas of direct sunlight.iC transmissioniC transmission15°Approx. 4 m15°Infrared portdv55_E.book  353 ページ  2008年4月17日 木曜日 午後2時12分
354e16_dv55_7e.fm[354/362]Data Display/Edit/Management During iC transmission, the FOMA terminal status is the same as when outside the service area, such that making/receiving calls, i-mode, and data communications are not possible. iC transmission is not available while a call is in progress or the IC card is locked. Data that can be sent and received or operations when various lock functions are set are same as for Ir exchange (nP. 349). For details on starting iC transmission from i-appli nP. 251 Use while placing FeliCa mark (b) of receiving side FOMA terminal on that of sending side FOMA terminal as shown above. Do not move the FOMA terminal until all data are sent and received. Sending and receiving data may be difficult according to other party’s FOMA terminal. In such cases, make the clearance between the FeliCa marks (b) closer or farther, or move them up/down/left/right alternately. During iC transmission, FOMA terminal called LED flashes (nP. 123).Example: Phonebook1In stand-by, press a.2Select a name/C/[Send data]/[iC transmission]/[Send]/[Yes].  In the details screen: Press C/[Send data]/[iC transmission]/[Send]/[Yes].3Place FeliCa mark (b) on that of the other party’s FOMA terminal.1Place FeliCa mark (b) on that of the other party’s FOMA terminal.2Select [Yes].Precautions for using iC transmission functionFeliCa markSending and receiving data individuallySending a single data item <Send>Receiving a single data item <Receive>Note When receiving phonebook, a confirmation message to store in PushTalk phonebook appears. To store, select [Yes]. When multiple phone numbers are stored, select the phone number. However, if the 2in1 mode is set to [B mode], the PushTalk phonebook confirmation screen does not appear.dv55_E.book  354 ページ  2008年4月17日 木曜日 午後2時12分
e16_dv55_7e.fm[355/362]355Continued on next pageData Display/Edit/Management Terminal security code and authentication password entry are required for sending or receiving all data items. The authentication password is a password exclusively for iC transmission. Before starting data transfer, the sender and receiver must enter the same user-specified four-digit password.Example: Phonebook1In stand-by, press a/C/[Send data]/[iC transmission]/[Send all].2Enter the terminal security code/t. 3Enter the authentication password/t/[Yes].4Place FeliCa mark (b) on that of the other party’s FOMA terminal.1In stand-by, place the FeliCa mark (b) on that of the other party’s FOMA terminal.2Select [Yes].3Enter the terminal security code/t. 4Enter the authentication password/t/[Yes]. To cancel Receive: While receiving data, press C.Use the FOMA terminal as a voice recorder. Save up to 400 recordings on the [Multimedia] folder of microSD Card (Actual number varies depending on recording time). Record up to 6 hours per recording. When recording is attempted after the 400th recording, the message stating that recording is failed appears and Voice recorder ends. Record up to approximately 10 hours when saving to a 64 MB microSD Card. Recording within a distance of approximately 1.5 m is recommended. Play back recorded voice or audio with i-motion player (nP. 324). Recording start sound is heard and recording starts. The picture light flashes during recording.1In the Custom menu, select [Media tool]/[Voice recorder]/t/<. To pause/play: Press i.2Press t/< to end recording. Recording stops automatically in the following circumstances.When the remaining time goes to 00:00:00When recording time reaches approximately 6 hoursWhen microSD Card has no available space3Select [Save]. Recorded voice is saved. To play back recorded voice: Select [Play]. To cancel recorded voice: Select [Cancel]/[Yes].Sending and receiving all data itemsSending all data items <Send all>Receiving all data items <Receive all>Voice recorderUsing the FOMA terminal handset as a voice recorderRecordingdv55_E.book  355 ページ  2008年4月17日 木曜日 午後2時12分

Navigation menu