Sharp HRO00072 Cellular Transceiver User Manual 080716 sh8010c e
Sharp Corporation Cellular Transceiver 080716 sh8010c e
UserManual.wiki
>
Sharp
>
HRO00072 User Manual
>
Manual
Contents
1.
Manual
2.
Bluetooth Logo
3.
User Manual
Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![20 Getting StartedDisplay Indicators 1. / : Strength of received signal/Service out of range: EDGE: GPRS enabled: Roaming outside network2. / : Connection to the server [established/communicating]3. / : Voice call [incoming/in progress]4. / : Alerts [text message and multimedia message/Email]5. ///: Mailbox full [SIM card only/handset only/both SIM card and handset/Email only]6. : “Voice Calls” diverts set to “Always”7. ///////: Connection status [USB data cable [standby or connected to a USB device/exchanging information]/IrDA setting [standby/exchanging information]/Bluetoothwireless setting [standby/exchanging information/talking with the Bluetooth headset/Hide my phone]]8. / / : Java™ application [executed (colour)/suspended (grey)]/Music PlayerRight soft keyCentre keyLeft soft keyIndicator area](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-21.png)
![Getting Started 219. : Secure WAP/Web page displayed10. / / : Silent/vibration setting [silent/vibration enabled/silent and vibration enabled]11. / : Speaker mode [speaker phone on/microphone muted]12. : Memory card inserted13. / : Battery level14. : Daily alarm enabled15. / : Schedule entry enabled [with/without reminder alarm]16. : Outbox contains unsent messages [text message/multimedia/Email]17. : Voicemail message alert18. : “Show Secret Data” set to “On”19. : Function Lock enabled20. : Keypad Lock enabled21.(No display)///: Current profile [Normal/Car/Silent/Original]22. : Hour minder enabled23. : Auto answer enabled24. / / : Answer Phone [enabled/enabled with message saved/disabled with message saved]](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-22.png)
![24 Navigating FunctionsShortcutsYour phone has a shortcut function (press E in standby) which enables you to access the desired menu quickly. The default shortcuts are as follows (shortcuts assigned to Q-O can be customised):• Main menu• Enter Phone Number•G:Inbox•H: Create Message•I: Bookmarks•J: Calendar•K: Phonebook•L:Gallery•M:Calculator•N:Alarms•O:Bluetooth•Q:Scan CardTo Use the Shortcut Key1. Press E in standby.2. Select the desired item or number.To Customise the Assigned Shortcuts1. Press E in standby.2. Highlight the shortcut you wish to customise from Q-O.3. Press [Options] and select “Assign”.The list of the available items is displayed.4. Select the desired item.Note•To move the item in the list that appears in step 1, highlight the item, press [Options] and select “Move”. Then press a or b to the desired location and press B.•To reset the customised shortcut, press [Options] and select “Set to Default” in step 2.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-25.png)
![Motion Control 27To Set Quick Shortcut“Settings” o “Phone Settings” tab o “Motion Control” o“Quick Shortcut”1. Select “Switch On/Off”.2. Select “On” or “Off”.To Change the Assigned Quick Shortcut“Settings” o “Phone Settings” tab o “Motion Control” o“Quick Shortcut” o “Quick Shortcut Entry”1. Select “Portrait” or “Landscape”.2. Select the desired application and press [Assign].Note•To delete an assigned shortcut, highlight “Portrait” or “Landscape” in step 1, press [Options] and then press [Delete].•To reset the assigned shortcut, highlight “Portrait” or “Landscape” in step 1, press [Options] and then press [Reset Settings].TappingSet your phone so the application currently being used can be ended by tapping the back of the phone a few times (3 to 5 times). (The phone returns to standby.)Quick SilentQuickly silence your phone (the ringtone, alarm tone, etc.) just by turning the phone over. (M 9-7-2)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-28.png)
![Voice Call Functions 29Voice Call FunctionsMaking a Voice Call1. Enter the area code and the phone number you wish to dial, and then press D to dial.If you enter the wrong number, press U to delete the number to the left of the cursor.Emergency Calls1. Enter the official emergency number for your location using the keypad and press D to dial.Note•It may not be possible to make emergency calls on all mobile phone networks when certain network services and/or phone features are in use. Contact your service provider for more information.•Emergency numbers differ depending on the location.•Before making the emergency call, make sure the phone is turned on, the signal is strong, and a SIM card is inserted properly.•During an emergency call, do not end the call until you are given permission to do so.•Connection in all conditions cannot be guaranteed for wireless phones. You should never rely solely on any wireless device for communication during an emergency.International Calls1. Long press Q until a (international dialling prefix) sign is displayed.2. Enter the country code, followed by the area code (without the leading zero) and the phone number, and press D to dial.Adding an Entered Phone Number to the Phonebook1. After entering a phone number, press [Options] and select “Save Number”.For details on creating a new entry, see “Adding a New Entry” on page 39.Showing or Hiding My Phone Number on the Display of the Called Party1. After entering a phone number, press [Options], select “Show My ID” or “Hide My ID” and press D to dial.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-30.png)
![30 Voice Call FunctionsSpeed DiallingThe digit keys (G to O) can be used for speed dial. Up to 8 phone numbers from the Phonebook memory (Handset and SIM) can be assigned to H to O. The phone number of the Voicemail centre is assigned to G.For details on setting the speed dial list, see “Speed Dial List” on page 44.1. To dial a number using the speed dial, long press any of the digit keys (G to O).The phone number saved in the speed dial list is dialled.RediallingYou can redial numbers in the call log. Select from specific categories or “All Calls”. Specific categories contain up to 30 numbers and the “All Calls” list contains up to 90.1. Press D in standby.2. Select the category from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”.To switch logs, press c or d.3. Highlight the phone number you wish to call.4. Press D to redial a voice call.Answering a Voice CallWhen an incoming call is detected, the phone rings.1. Press D or B to answer the call.Or press any key except F,U,S, [Options] or [Busy] when the “Any Key Answer” function is enabled. Set the Any Key Answer function in the profile of each mode (p. 93).You can answer an incoming call by sliding open your phone if “Calls on Open” is set to “On” in Slider Settings (p. 102).Rejecting an Incoming Call1. Press [Options] and select “Reject” while the phone is ringing to reject a call you do not wish to answer.In Call Menu (Voice Call)Adjusting the Earpiece VolumeYou can adjust the earpiece volume to five levels.1. Press V or W to display the Earpiece Volume screen.2. Press V (or a/d) to increase the volume of the call or press W (or b/c) to decrease the volume.3. Press B when the volume is set to the desired level.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-31.png)
![Voice Call Functions 31Turning the Speaker On and OffYou can talk via the loudspeaker on the phone when it is on.1. During a call, press B.Putting a Call on HoldTo Make Another Call during a Call1. During a call, press [Options] and select “Hold”.The current call is put on hold.2. Press [Options] and select “Dial New Number”.3. Enter the phone number you wish to make another call to, then press D.Tip•You can also make another call by entering the phone number during a call instead of step 1. The current call is automatically put on hold.Accessing SMS/MMS Menu during a Call1. During a call, press [Options] and select “Messages”.The following options are available: “Create Message” to make an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to access these folders. For details on SMS and MMS, see “SMS” and “MMS” on page 55.Call Waiting1. During a call, press [Options] and select “Hold & Answer” to answer the second call.The first call is put on hold and you can now talk to the second caller.You can also answer the second call by pressing D.Note•You need to set “Call Waiting” to “On” if you wish to use the Call Waiting service (p. 107).•Call Waiting service may not be available on all networks. Contact your service provider for more information.•If you do not wish to answer the second call, press [Options] and select “Busy” in step 1. If “Reject” is selected, the log of the second call is saved as a missed call.Conference CallConference call is a call with more than 2 participants. You may include up to 5 participants in a conference call.To Make a Conference CallYou must have one active call and one held call.1. During a call, press [Options] and select “Conference All” to join the conference call.2. Press F to end the conference call.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-32.png)
![32 Voice Call FunctionsNote•The conference call service may not be available on all networks. Contact your service provider for more information.•To end the call with all participants, press [Options] and select “End All Call(s)”.•You have more options for the Conference call after selecting “Conference All” in step 1:•To put all participants on hold, select “Hold All”.•To put all participants except the current call on hold, select “Private”.To Add New Participants to the Conference Call1. Press [Options] and select “Dial New Number”.2. Enter the number you wish to include in the conference call and press D to dial.3. Press [Options] and select “Conference All” to join the conference call.If you wish to add other participants, repeat steps 1 to 3.To End the Call with a Conference Call Participant1. During a conference call, highlight the person that you wish to disconnect from the conference call.2. Press [Options] and select “End This Call”.To Have a Private Conversation with One of the Participants1. During a conference call, select the person that you wish to talk to.2. Press [Options] and select “Private”.3. Once you have finished the private conversation, press [Options] and select “Conference All” to return to the conference call.Muting the Microphone1. During a call, press [Mute].To use the microphone again, press [Unmute].](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-33.png)
![Entering Characters 33Entering CharactersIn multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter A or twice for the letter B.Press the following keys to:Long press the following keys to:Changing the Input Language1. On the text entry screen, press [Options] and select “Input Language”.2. Select the desired language.Changing the Input Method1. On the text entry screen, press [Options].2. Select “Input Method”.3. Select the input method you wish to use.Tip•In T9 or multi-tap mode, you can switch input mode as follows by pressing P.G: Enter:. (full-stop) , (comma) ? ! : ; ' (apostrophe) " / 1Q: Enter:(space)+ = < > € £ $ ¥ % & 0P: Switch character case among four modes:Abc, ABC, abc and 123.R: Display the pictograms and symbols input screen.G-O: Enter 1-9 numbers.Q: Enter space in Numeric mode or to enter 0 in other modes.P: Shift between multi-tap and T9 mode.R: Display the language options screen.Input Method Input Language = Simplified ChineseInput Language = EnglishT9 Mode T9 PinYinT9 StrokeT9 AbcT9 ABCT9 abcMulti-tap modeAbcABCabcNumericAbcABCabcNumeric](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-34.png)
![34 Entering CharactersEnglish/T9 modeEnglish/Multi-tap modeSimplified Chinese/T9 modeT9 English ModeUsing T9 English Mode1. On the text entry screen, press [Options].2. Select “Input Method”.3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you wish to change. “ ” is displayed on the screen.4. Press the keys to enter characters.5. Press a or b to select the word you wish to input.6.If you wish to clear the word, highlight it and long press U.7. Press B to complete the selection.Tip•If you press Q instead of step 6, a space is inserted next to the selected word.T9 PinYin and T9 Stroke ModeIn T9 PinYin and T9 Stroke mode, keys are as follows.Key Stroke PinYinGHabcIdefJghiKjklLWildcard mnoMpqrsNtuvOwxyzPChange Input MethodQSpaceRGo to the pictograms and symbols input screen.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-35.png)
![36 Entering CharactersTip• When the cursor is placed after the first character, the candidate field displays characters most likely to follow.• If you want to use tone options, long press P instead of step 3 to display the desired character.The tone symbols are displayed in the candidate field.Press the corresponding numeric key (H).Selecting the Character to Input1. Perform steps 1 and 2 in “Using Stroke Mode” or “Using PinYin Mode” on page 35. 2. Press b to highlight the Chinese character.3. Press c or d to select the character you wish to input and press B.You can also enter the desired Chinese character by pressing the candidate number directly using the keypad.User DictionaryYou can create your own word list for alphabet text and T9 Chinese input.English User DictionaryNote•This function is only available when “Input Language” is set to “English”.To Create a New Entry1. On the text entry screen, press [Options] and select “User Dictionary”.2. Select “Add New Word”.3. Enter a new word.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-37.png)
![Entering Characters 37To Edit a Word in the List1. On the text entry screen, press [Options] and select “User Dictionary”.2. Highlight the desired word.3. Press [Options] and select “Edit”.4. Modify the word.To Delete a Word1. On the text entry screen, press [Options] and select “User Dictionary”.2. Highlight the desired word.3. Press [Options] and select “Delete”.4. Select “Yes” or “No”.Chinese User DictionaryYou can enter Chinese characters, alphabet, symbols and numbers for Chinese word lists.Note•This function is only available when “Input Language” is set to “Simplified Chinese”.•Only capital letters can be used for acronyms.To Create a New Entry1. On the text entry screen, press [Options] and select “Chinese User Dictionary”.2. Select “Add New Word”.3. Enter a new word.4. Enter an acronym.To Edit a Word in the List1. On the text entry screen, press [Options] and select “Chinese User Dictionary”.2. Highlight the desired word.3. Press [Options] and select “Edit”.4. Modify the entry word.5. Modify the acronym.To Delete a Word1. On the text entry screen, press [Options] and select “Chinese User Dictionary”.2. Highlight the desired word.3. Press [Options] and select “Delete”.4. Select “Yes” or “No”.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-38.png)
![38 Entering CharactersEntering Pictograms and Symbols1. On the text entry screen, press [Options] and select “Add Symbol”. The history for the pictograms screen is displayed first.Press A to see all pictograms.Press C to switch to the symbols screen.2. Select the pictogram or symbol you wish to use and press B.Note•Pictograms are only available for SMS/MMS messages and Text Template. However, pictograms can be used in an application other than SMS, MMS or Text Template in the following cases:•When the pictogram is saved in a text template and that text is inserted using “Insert Template”.•When pasting text using “Copy” and “Paste”.Using TemplatesFor details on creating the text template, see “Adding Phrases to Text Templates” on page 87.1. On the text entry screen, move the cursor to the point you wish to insert the template.2. Press [Options] and select “Advanced”.3. Select “Insert Template”.4. Select the desired text template.Copying, Cutting and Pasting Text1. On the text entry screen, press [Options] and select “Advanced”.2. Select “Copy” or “Cut”.3. Move the cursor to the first letter to be copied or to be cut, then press B.4. Move the cursor to the last letter to highlight the area, then press B.5. Move the cursor to the point you wish to paste the letters.6. Press [Options] and select “Advanced”.7. Select “Paste”.8. Select the desired item.Insert Phonebook EntriesFor details on creating the Phonebook entries, see “Call Manager” on page 39.1. On the text entry screen, move the cursor to the point you wish to insert the Phonebook Entry.2. Press [Options] and select “Advanced”.3. Select “Insert Phonebook Entry”.4. Select the desired Phonebook Entry.The selected entry is inserted.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-39.png)
![Call Manager 39Call ManagerYour phone can store up to 1000 entries. For each entry, you can enter information including up to 5 phone numbers and 5 Email addresses. There is a limit to the number of characters that can be entered for each item. The character limit differs for the handset memory and SIM card memory.Adding a New EntrySelecting the Storage Memory“Call Manager” o “Phonebook Settings” o “Save to”1. Select from “Handset”, “SIM” or “Choice”.Registering a New Entry“Call Manager” o “Add New”1. Select the field you wish to fill in, and enter the relevant information.2. Press [Save] when finished.Saving an Unregistered Number“Call Manager” o “Phonebook Settings” o “Save Unregistered”1. Select “Incoming Call” or “Outgoing Call”.2. Select “On” or “Off”.Registering My Card“Call Manager” o “My Card”Searching for an EntryChanging the List Displayed“Call Manager” o “Phonebook Settings” o “Source”1. Select from “Handset”, “SIM” or “Both”.Finding a Name“Call Manager” o “Phonebook”1. Enter the first few letters of the name.The first name corresponding to the entered letters is highlighted.Sorting the Phonebook List Order“Call Manager” o “Phonebook Settings” o “View Phonebook”1. Select “By PinYin” or “By Group”.Selecting the Search Mode“Call Manager” o “Phonebook Settings” o “Search Mode”1. Select “Character Search”, “PinYin Search” or “English Search”. (M 8) (M 8-9-3) (M 8-2) (M 8-9-5) (M 8-6) (M 8-9-2) (M 8-9-1) (M 8-9-4)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-40.png)
![40 Call ManagerDialling from the Phonebook“Call Manager” o “Phonebook”1. Highlight the desired entry and press D to make a voice call.Dialling a Service Phone NumberCertain SIM cards contain service phone numbers that can be dialled. Contact your SIM card vendor for more information. “Call Manager” o “Service Dialling No.”1. Select the desired service phone number.Sending a Message from the Phonebook“Call Manager” o “Phonebook”1. Select the desired entry including the phone number or Email address you wish to use.2. Select the desired phone number or Email address.3. When a phone number is selected in step 2, select “Create Message”.For further procedures, see “Creating a New Message” on page 55.Using Mailing ListsUp to 20 groups can be registered.To Create a New Mailing List“Call Manager” o “Message Groups” o “Add New Group”1. Enter the group name.The new group name is displayed following the last group on the Group List screen.To Add Recipients to a GroupUp to 20 recipients can be registered in each list.“Call Manager” o “Message Groups”1. Select the desired group name.2. Select “Assign New Entry”.3. Select the desired entry.The detailed screen is displayed.4. Select the desired phone number or Email address.To Send a Message Using a Mailing List“Call Manager” o “Message Groups”1. Highlight the desired group name.2. Press [Options] and select “Create Message”.For further procedures, see “Creating a New Message” on page 55. (M 8-10) (M 8-8)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-41.png)
![Call Manager 41Editing Phonebook Entries“Call Manager” o “Phonebook”1. Highlight the entry you wish to edit.2. Press [Options] and select “Edit”.3. Modify the information.4. Press [Save] when finished.Adding a Thumbnail to EntriesOnly Phonebook entries saved to the handset can have thumbnails attached to them.“Call Manager” o “Phonebook”1. Highlight the desired entry.2. Press [Options] and select “Edit”.3. Select “Picture”.4. Select “Assign Picture”.5. Select the desired picture.6. Press [Save] when finished.Note•If you delete a picture in the handset memory, the corresponding thumbnail is also deleted.•To store a picture right after it was taken, select “Take Picture” in step 4.Assigning a Ringtone or a Ring Video Clip to Each Entry“Call Manager” o “Phonebook”1. Highlight the desired entry.2. Press [Options] and select “Edit”.3. Select “Tone/Video for Voice Call” or “Tone/Video for New Message”.4. Select “Assign Tone”.5. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or “Flash®”.6. Select the desired tone or video clip.For details on selecting a ringtone or a ring video clip, see “Assigning a Ringtone for an Incoming Call” or “Assigning a Ring Video Clip for an Incoming Call” on page 97.7. Press [Save] when finished.Deleting Phonebook EntriesDeleting All Phonebook Entries“Call Manager” o “Advanced” o “Delete All Entries”1. Select from “Handset Entries”, “SIM Entries” or “Both Entries”.2. Enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-42.png)
![42 Call ManagerDeleting a Phonebook Entry“Call Manager” o “Phonebook”1. Highlight the desired entry.2. Press [Options] and select “Delete”.Managing the PhonebookCopying Phonebook Entries between SIM Card and Handset“Call Manager” o “Advanced” o “Copy All Entries”1. Select “From SIM to Handset” or “From Handset to SIM”.Note•When you insert the SIM card into your phone for the first time and start the Phonebook application, the confirmation screen is displayed automatically, asking you if you wish to copy or not. The number of Phonebook entries to be copied varies depending on the SIM capacity.•If the memory space is not enough to save all entries, you cannot complete copying.Sending a Phonebook Entry“Call Manager” o “Phonebook”1. Highlight the desired entry.2. Press [Options] and select “Send Phonebook”.3. Select “As Message”, “As Email”, “Via Bluetooth” or “Via Infrared”.For “As Message”For details, see “MMS” on page 55.For “As Email”For details, see “Email” on page 55.For “Via Bluetooth”For details, see “Bluetooth” on page 113.For “Via Infrared”For details, see “Infrared” on page 115.Receiving a Phonebook EntryWhen the phone receives a Phonebook entry, a confirmation message is displayed in standby.1. Select “Yes”.The received entry is saved in the Phonebook. Select “No” to reject.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-43.png)
![Call Manager 43Play MessagesYou can play back the messages saved with Answer Phone.“Call Manager” o “Play Messages”Playback automatically ends when all messages have been played.To stop playback, press U.Press V (or a) to increase the volume or press W (or b) to decrease the volume.To play back previous message, press c.To play back the next message, press B or d.To delete the message being played back, press [Delete] during playback.Note•Up to 20 messages (a total of approximately 90 seconds) can be recorded. Answer Phone cannot be used when the remaining available recording time is less than 12 seconds, or when 20 messages are already saved. In such cases, delete unnecessary messages.Tip•Press U in standby to play back the message saved with Answer Phone.Manage GroupsDifferent ringtones can be set for each category.“Call Manager” o “Manage Groups”1. Highlight the desired category.2. Press [Options] and select “Assign Tone/Video”.3. Select “For Voice Call” or “For New Message”.4. Select “Assign Tone”.5. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or “Flash®”.6. Select the desired tone or video clip.Editing the Category Name“Call Manager” o “Manage Groups”1. Highlight the desired category name.2. Press [Edit] and select “Edit Name”.3. Modify the name. (M 8-3) (M 8-5)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-44.png)
![44 Call ManagerSpeed Dial ListSetting Phonebook Entries in the Speed Dial ListTo Create a New Entry for Speed Dial or Speed Mail“Call Manager” o “Speed Dial List”1. Select an empty entry.2. Press [Assign].3. Select the desired Phonebook entry.4. Select the desired phone number.5. Press B.You can now also assign an Email address for Speed Mail.6. Select the desired Email address.7. Press B.8. Press [Save] to save the details to the selected digit key.To Change the Speed Dial List or the Speed Mail List“Call Manager” o “Speed Dial List”1. Select the entry you wish to change.2. Press [Options] and select “Change”.3. Select the “Call number” or “Mail address” you wish to modify.4. Press [Change].5. Select the phone number or Email address to assign.If you wish to remove the entry, select “Do not Assign”.6. Press [Save].Memory StatusThis function helps you to check the memory used in the Phonebook.“Call Manager” o “Advanced” o “Memory Status” (M 8-7)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-45.png)
![Multimedia 45MultimediaMusic PlayerMusic player supports MP3, MPEG-4 and 3GPP format sound files. Playing Back Sound Files“Multimedia” o “Music Player” o “My Music”1. Select the item you wish to play back.• “All Music”: All sound files are displayed.• “Artists”: The names of all artists are displayed.• “Albums”: The names of all albums are displayed.• “Playlists”: All playlists are displayed.2. Select the desired sound file.To pause playback, press B.To stop playback, press F and go back to standby, then press F again. Select “Yes” when the pop-up appears.Note•Select “My Music” to update the list of available music tracks. •You are asked whether or not to play sounds when the Silent mode is activated.•When the motion control setting for “Music” is set to “On” (p. 100), you can change the sound file being played back by shaking the phone sideways. This is only available when the phone is closed.•When you receive a call, playback of the current file is paused, and you can receive the call. After the call ends, playback resumes automatically.To Play Back the Last File“Multimedia” o “Music Player”1. Select “Last Played Music”.“Currently Playing” is displayed when a file is being played back.Searching a File to be Played Back“Multimedia” o “Music Player” o “My Music”1. Select “All Music” or the desired album or playlist.2. Press [Options] and select “Search”.3. Enter a few letters of the title.Search results are displayed with the first matching title highlighted (non-matching titles are greyed out). Press a or b to select other matching titles. The search will match the entered text with any part of the title.Sorting Files“Multimedia” o “Music Player” o “My Music” o “All Music”1. Press [Options] and select “Sort”.2. Select “By Title”, “By Artist”, “By Album” or “By Genre”.Sort results are displayed. (M 7) (M 7-1) (M 7-1-1)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-46.png)
![46 MultimediaAdding a File to the Playlist“Multimedia” o “Music Player” o “My Music” o “All Music”1. Highlight the file you wish to add to the playlist.2. Press [Options] and select “Add to Playlist”.The playlists are displayed. For details on adding a playlist, see “Adding a New Playlist”.3. Select the desired playlist.The file highlighted in step 1 is saved.To delete files from the playlist, highlight the file in the playlist and press [Options]. Then select “Delete from Playlist”.Note•You can store up to 99 files in one playlist. However, the total number of files stored on your phone cannot exceed 350 files.Adding a New Playlist“Multimedia” o “Music Player” o “My Music”o“Playlists”1. Press [Options] and select “Add New Playlist”.2. Enter the desired playlist name.Note•To delete the playlist, highlight the playlist and press [Options]. Then select “Delete Playlist”.•You can create up to 99 playlists.Video PlayerVideo Player supports MPEG-4, 3GPP and H.264 format video files.Playing Back Video Clip Files“Multimedia” o “Video Player” o “My Videos”1. Select “Handset Memory” or “Memory Card”.2. Select “All Videos” or the desired playlist.3. Select the desired file.To pause playback, press B.To stop playback, press U.To Play Back or Resume Playback of the Last File“Multimedia” o “Video Player” o “Last Played Video”Searching a File to Be Played Back“Multimedia” o “Video Player” o “My Videos”1. Select “Handset Memory” or “Memory Card”.2. Select “All Videos” or the desired playlist.3. Press [Options] and select “Search”.4. Enter a few letters of the title.Search results are displayed with the first matching title highlighted (non-matching titles are greyed out). Press a or b to select other matching titles. The search will match the entered text with any part of the title. (M 7-2) (M 7-2-2) (M 7-2-1)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-47.png)
![Multimedia 47Adding a File to the Playlist“Multimedia” o “Video Player” o “My Videos”1. Select “Handset Memory” or “Memory Card”.2. Select “All Videos”.3. Highlight the file you wish to add to the playlist.4. Press [Options] and select “Add to Playlist”.The playlists are displayed. For details on creating a playlist, see “Adding a New Playlist”.5. Select the desired playlist.The file highlighted in step 3 is saved.To delete files from the playlist, highlight the file in the playlist and press [Options]. Then select “Delete from Playlist”.Adding a New Playlist“Multimedia” o “Video Player” o “My Videos”1. Select “Handset Memory” or “Memory Card”.2. Press [Options] and select “Add New Playlist”.3. Enter the desired playlist name.4. Press B.Note•To delete the playlist, highlight the playlist and press [Options]. Then select “Delete Playlist”.Settings“Multimedia” o “Video Player” o “Settings”1. Select from “Playback Pattern”, “Backlight”, “Display Size” or “Sound Effects”.2. Select from the following:• “Playback Pattern” (“Normal”, “Repeat”, “Repeat All”, “Random”)• “Backlight” (“Always On”, “Always Off”, “Normal Settings”)When “Normal Settings” is selected, the backlight works with the main backlight setting (p. 95).• “Display Size” (“Normal Size”, “Enlarge”, “Full screen”, “Widescreen”)• “Sound Effects” (Various sound effects are available, including “Normal”, “Bass” and “Surround”.)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-48.png)
![50 CameraNote•In photo camera mode, the zoom function is not available for picture sizes 900 u 1600 and 1200 u 1600.Adjusting the Exposure“Camera” o [Options] o “Shooting Settings” o“Exposure”“Camera” o [Options] o “Record Settings” o “Exposure”1. Press d (Bright) or c (Dark).: (Dark o Normal o Bright)Once the phone has returned to standby, the brightness settings return to default.Switching the Focus Mode“Camera” o [Options] o “Shooting Settings” o “Focus”“Camera” o [Options] o “Record Settings” o “Focus”1. Select the desired option.: Auto Focus: Manual Focus:MacroSelecting the Picture or Video QualitySelect the appropriate option.“Camera” o[Options] o “Picture Quality”“Camera” o[Options] o “Video Quality”1. Select the desired picture or video quality.: Super Fine:Fine:NormalNote•The better quality you select, the larger the file size becomes.Using the Self-Timer“Camera” o [Options] o “Self-timer”1. Select “2sec”, “5sec” or “10sec”. When you select one of these options, the corresponding indicator (“ ”, “ ”, or “ ”) is displayed on the screen.Select “Off” to cancel the self-timer.Selecting the Storage Memory“Camera” o [Options] o “Settings” o “Save New Pictures”“Camera” o [Options] o “Settings” o “Save New Videos”1. Select the desired location from “To Handset Memory”, “To Memory Card” or “Choice”.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-51.png)
![Camera 51Note•If you select “Choice”, select the desired location every time you save.Auto Save“Camera” o [Options] o “Settings” o “Auto Save”1. Select “On” or “Off”.Using the Help Function“Camera” o [Options] o “Help”Mobile Light“Camera” o [Options] o “Mobile Light”1. Select the desired mode.“On” ( ): The light is always on.“Auto” ( ): The light turns on if the phone detects that the conditions are dark.“Low Light” ( ) (photo camera mode only):Select this mode for macro shooting.“Off”: The light is always off.The corresponding indicator is displayed on the screen. Select “Off” to turn it off.Switching between the Photo and Video Camera ModesYou can switch between the photo and video camera modes by pressing C.Common Shortcut KeysNote•The “Switches the display modes” option is available in “Preview” before you save a video clip. See “Recording Video Clips” on page 49.Photo Camera Video CameraDFocus LockGFocusHSwitches Viewfinder between with and without indicatorsSwitches the display modes in the Preview screenIScan BarcodeJSave New Pictures Save New VideosKPicture SizeLScene MicrophoneMPicture Quality Video QualityNSelf-timerOZoom Max/MinQHelpRMobile Light](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-52.png)
![52 CameraFunctions in Photo Camera ModeSelecting the Picture SizeYou can select the size of pictures. All taken pictures are saved in the JPEG format.“Camera” o [Options] o “Picture Size”1. Select the desired size.1200 u 1600/900 u 1600/960 u 1280/480 u 640/240 u 400/240 u 320/120 u 160Continuous Shoot“Camera” o[Options] o “Modes” o “Continuous Shoot”1. Select the desired mode.The following continuous shoot modes are available:“Off”: The continuous shoots are cancelled.“4 Pictures”/“9 Pictures” ( / ): Takes 4 or 9 pictures continuously. After selecting this mode, select from “Fast”, “Normal”, “Slow” or “Manual”.“Overlapped” ( ): Overlaps continuous pictures into one picture and makes an afterimage. After selecting this mode, select “Fast” or “Normal”.Note•When you select “Manual” to take continuous pictures, press Bmanually at the desired speed.•You cannot use the Continuous Shoot function for picture sizes larger than 480 u 640 pixels. “9 Pictures” and “Overlapped” are not available for picture sizes larger than 240 u 400 pixels.Taking Panorama Pictures“Camera” o[Options] o “Modes” o “Panorama”1. Select “On” and press B.2. Move the phone slowly to keep the + mark aligned with the assisting lines, and press B.3. Select “Save”.Note•The image is captured automatically if the bar in the lower right turns blue before B is pressed in step 2.To Set the Assisting Lines“Camera” o[Options] o “Settings” o “Panorama Settings” o “Assisting Lines”1. Select “On” or “Off”.Note•An error message is displayed if you move the phone fast when taking panorama pictures with this setting on.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-53.png)
![Camera 53To Set the AE-LockWhen this setting is enabled, the exposure setting is fixed for the same brightness level.“Camera” o[Options] o “Settings” o “Panorama Settings” o “AE-Lock”1. Select “Enable” or “Disable”.Barcode/ScanYou can read QR codes and the text on business cards. For details on reading barcodes, see page 89. For details on scanning business cards, see pages 89 and 90.To Read Barcodes“Camera” o[Options] o “Barcode/Scan” o “Scan Barcode”1. Display the barcode.2. Press [Scan].The scanned result is displayed.To Scan Business Cards“Camera” o[Options] o “Barcode/Scan” o “Scan Card”1. Display the business card.2. Press [Read].3. Press [Scan] or B.The scanned result is displayed.Camera Effects“Camera” o[Options] o “Modes” o “Camera Effects” 1. Select from “Sepia”, “Monochrome”, “Negative” or “Sketch”.Selecting a Frame“Camera” o[Options] o “Modes” o “Add Frame”1. Select “Preset Frames” or “Picture Gallery”.2. Select the desired frame.The selected frame is confirmed on the display.3. Press B.Note•Images larger than 240 pixels [W] u 400 pixels [H] cannot be used.Selecting the Scene“Camera” o[Options] o “Scene”1. Select from “Auto”, “Night”, “Sports” or “Text”.Using the Full Screen“Camera” o[Options] o “Settings” o “Display Indicators” o “Full Viewfinder”Note•To return to the normal viewfinder, select “Normal Viewfinder”.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-54.png)
![54 CameraSelecting the Shutter Sound“Camera” o[Options] o “Settings” o “Shutter Sound”1. Select the desired shutter sound from 3 preset patterns.To play back the shutter sound, press [Play] in step 1.Note•Continuous Shoot uses the specialised shutter sound that cannot be changed using the above settings.•The shutter sound remains active even when “General Volume” (p. 97) is set to “Silent” to prevent unauthorised use.Functions in Video Camera ModeSelecting the Display Size“Camera” o [Options] o “Display Size”1. Select “Standard” or “Expand”.Selecting the Recording Time and Picture Size“Camera” o [Options] o “Record Time/Size”1. Select “For Message”, “Extended Video” or “SD VIDEO”.For Message ( ): Limits the size to send a message depending on service providers.Extended Video ( ): Less than 30 minutes (depending on the memory).SD VIDEO ( ): Records in SD VIDEO format.2. Select the desired picture size.If “For Message” is selected, select “QCIF(176u144)” or “SubQCIF(128u96)”.If “Extended Video” is selected, select “QVGA(320u240)”, “HQVGA(240u176)”, “QCIF(176u144)” or “SubQCIF(128u96)”.If “SD VIDEO” is selected, select “QVGA(320u240)”.Note•If you select “For Message” for the recording time, the file size is limited depending on the service provider. Therefore, the quality is also limited for the setting.•“Send” is not displayed after recording in the Extended Video mode.Recording Video Clips with SoundTo record a video clip with sound, the microphone needs to be activated.“Camera” o [Options] o “Microphone”1. Select “On” or “Off”.Note•The microphone is already turned on in the default setting. Select “Off” to record a video clip without the sound.•The file size of a video clip can be reduced if the sound is not recorded.Video Encoding“Camera” o [Options] o “Settings” o “Video Encode”1. Select the appropriate format.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-55.png)
![Messages 55MessagesSMSSMS allows you to send text messages up to 765 characters long. If you send a message of more than 160 characters, it is split into several segments.MMSWith MMS, you can send images, sound or video to brighten someone’s day. Messages of up to 50 KB with images, sound, or video clips can be sent and received. EmailEmail allows you to send messages of up to 300 KB.Note•Some MMS functions may not always be available depending on your network. Contact your service provider for more information.•Maximum message size varies depending on the restrictions set by the service provider.Creating a New Message(SMS/MMS)“Messages” o “Message” o “Create Message”(Email)“Messages” o “Email” o “Create Email”1. Select the recipient field.2. Select the desired method to enter the recipient’s details.3. For MMS, enter or select the Email address or phone number from the Phonebook. For SMS, enter or select a phone number. For Email, enter or select an Email address.• To add multiple Email addresses or phone numbers, highlight the recipient field, press [Options], and select “Edit Recipients” and then select “Add Recipient”. Enter or select the Email address or phone number from the existing Phonebook.• To change the recipient types, press [Options], select “Edit Recipients” and highlight the desired recipient. Press [Options] and select “Change to To”, “Change to Cc” or “Change to Bcc”.• To add a subject, highlight the subject field and press B.Then enter the subject in the subject entry screen and press B.4. Place the cursor in the message field.5. Press B to display the message entry screen.Enter the message and press B. (M 4)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-56.png)
![56 Messages6. Press [Options] and select “Send”.“Send” is not available when no recipients are set.After the message is sent, the message is moved to the Sent box.Note•When you create an SMS message, the mode is automatically switched to MMS in the following cases:•When an Email address is entered in the recipient field.•When a subject is entered.•When the size of entered text has exceeded the SMS size limit.To Add a Slide Show1. Perform steps 1 to 5 in “Creating a New Message” on page 55.2. Press [Options] and select “Add Slide”.3. Select “Add Slide After” or “Add Slide Before”.4. Enter another message.If you wish to set the duration of each slide, highlight your message or other inserted item such as a picture or sound file. Press [Options] and select “Slide Duration”, then select the desired duration. Repeat steps 2 to 4 to add more slides.To Attach Data1. In step 6 in “Creating a New Message” on page 55, press [Options] and select “Insert Item”.2. Select “Picture”, “Sound”, “Video”, “Attach Contact”, “Attach Appointment”, “Others” or “Flash®”.When selecting “Attach Contact” or “Attach Appointment”, go to step 4.3. Select the desired option and then select the desired file.If you wish to attach pictures, sounds or video clips that are saved, select “Saved Pictures”, “Saved Sound” or “Saved Video”.If you wish to take new pictures, record sounds or video clips, select “Take Picture”, “Record Voice” or “Record Video”.4. Select the desired data.If you wish to select your own Phonebook entry, select “My Card”.When attaching an appointment, select the desired day including a schedule entry you wish to add and select the desired schedule entry.Note•When attaching JPEG files, select the appropriate resize option, as the maximum message size for sending varies depending on the service provider.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-57.png)
![Messages 57To Remove Attachments1. In step 6 in “Creating a New Message” on page 55, highlight the desired item, press [Options] and then select “Remove Item”.Using the Sending Options1. Press [Options] and select “Messaging Settings”.• “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or disables Delivery Report when the message is successfully sent to the recipient.• “Expiry Time” (“Maximum”, “1 hour”, “12 hours”, “1 day”, “1 week”) (SMS/MMS): Sets Expiry Time for a message to be saved in the server.• “Priority” (“High”, “Normal”, “Low”): Prioritises composed messages.• “Read Report” (“On”, “Off”) (MMS): Confirms whether or not a report is sent notifying the sender that the message has been read.2. Press [Options] and select “Send”.After the message is sent, the message is moved to the Sent box.Note•The current message size displayed while you are creating the message is an approximation.•If a message cannot be sent for some reason, the message stays in the Outbox and the “ ” is displayed in standby.•To send the message in the Outbox, highlight the message, press [Options] and select “Resend”.Sending a Message in the Drafts Box(SMS/MMS)“Messages” o “Message” o “Drafts”(Email)“Messages” o “Email” o “Drafts”1. Highlight the desired message.2. Press [Options] and select “Edit & Send”.3. Modify the message, if necessary.4. Press [Options] and select “Send”.“Send” is not available when no recipients are set.Reading a MessageMessages you receive are saved in the Inbox.(SMS/MMS)“Messages” o “Message” o “Inbox”(Email)“Messages” o “Email” o “Inbox”1. Select a folder.2. Select the message you wish to view.Note•When the motion control setting for “Messaging” is set to “On” (p. 100), you can change the size of the text by tilting the phone forward or backward. This is only available when the phone is closed.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-58.png)
![58 MessagesStoring the Phone Number of a Sender in the Phonebook(SMS/MMS)“Messages” o “Message” o “Inbox”(Email)“Messages” o “Email” o “Inbox”1. Select a folder.2. Highlight the message from which you wish to store the phone number or Email address.3. Press [Options] and select “Save Address”.The new Phonebook entry screen including the phone number is displayed. For details on creating a new Phonebook entry, see “Adding a New Entry” on page 39.Calling the Phone Number of a Sender Embedded in the Message(SMS/MMS)“Messages” o “Message” o “Inbox”1. Select a folder.2. Highlight the message containing the phone number you wish to dial.3. Press [Options] and select “Call Sender”.Downloading a Single MMS“Messages” o “Message” o “Inbox”1. Highlight the message alert ( ) you wish to download.2. Press [Options] and select “Download”.Replying to a Message(SMS/MMS)“Messages” o “Message” o “Inbox”(Email)“Messages” o “Email” o “Inbox”1. Select a folder.2. Highlight the message you wish to reply to.3. Press [Options] and select “Reply” (to sender only).4. Select “Reply” or “Reply with History”.5. Enter the message.6. Press [Options] and select “Send”.“Send” is not available when no recipients are set.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-59.png)
![Messages 59Forwarding a Message(SMS/MMS)“Messages” o “Message” o “Inbox”(Email)“Messages” o “Email” o “Inbox”1. Select a folder.2. Highlight the message you wish to forward.3. Press [Options] and select “Forward”.4. Perform steps 1 to 6 in “Creating a New Message” on page 55.Sorting the Messages in the List(SMS/MMS)“Messages” o “Message” o “Inbox”(Email)“Messages” o “Email” o “Inbox”1. Select a folder.2. Press [Options] and select “View Settings”.3. Select “Sort”.4. Select the desired sort option.Cell BroadcastsThis function may not be available on all mobile phone networks. Contact your service provider for more information.Enabling/Disabling Cell Broadcasts“Messages” o “Cell Broadcasts” o “Switch On/Off”1. Select “On” or “Off”.Reading Cell Broadcast Messages“Messages” o “Cell Broadcasts” o “Read Messages”1. Select the desired subject.2. Scroll the screen to read the message.3. Press U.Subscribing to Cell BroadcastsSelect the page of the cell broadcast message that you want.“Messages” o “Cell Broadcasts” o “Settings” o “Set Info Subjects”1. Press B.2. Highlight the desired subject and press B to check.3. Press [Save]. (M 4-3)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-60.png)
![Browser 65Editing Bookmarks“Browser” o “Bookmarks”1. Select the desired URL, and press [Options].You can edit the list of Bookmarks by the following options:(When a bookmark is highlighted)“Edit”: Edits URL address of the bookmark.“Add New Bookmark”: Creates new bookmarks.“Create Folder”: Creates new folders.“Open in New Tab”: Opens the bookmark as a new tab. (This option is available only from the browser screen.)“Send”: Sends the URL address to recipients.“Move”: Moves bookmarks to another location or into a folder.“Details”: Displays detailed information of the WAP/Web page.“Delete”: Deletes a bookmark.“Delete All”: Deletes all bookmarks.(When a folder is highlighted)“Add New Bookmark”: Creates new bookmarks.“Create Folder”: Creates new folders.“Move”: Moves folder and bookmarks in the folder to another location.“Rename Folder”: Renames the folder.“Delete”: Deletes the folder and bookmarks in the folder.“Delete All”: Deletes all folders and bookmarks.(When there are no bookmarks)“Add New Bookmark”: Creates new bookmarks.“Create Folder”: Creates new folders.Browser Settings“Browser” o “Browser Settings”“Font Size”: Sets the font size for browsing.“Scroll Settings”: Sets the scroll units and turns page navigation on/off.“Cursor Settings”: Sets whether or not to show the cursor, and its speed.“Downloads”: Sets whether or not to show images or play back sound when accessing a WAP/Web page.“Memory Operation”: Clears Cache, Cookies, or Authentication information.“Security Settings”: Adjusts the security prompt level.“Download to”: Sets the preferred download location.“Zoom Factor”: Sets the zoom ratio for viewing a page. “Zoom Area”: Sets the window size for displaying enlarged specific area.“Initialize Browser”: Initializes the browser settings and memory. (M 2-3) (M 2-6)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-66.png)
![66 Browser“Reset Settings”: Resets all the browser settings to the default settings.Browser Options when OnlineCo [Options]“Home”: Goes to the homepage.“Forward”: Goes to the next page.“Open This Frame”: Opens the selected frame. (This option is available only when a frame page is displayed.)“Bookmarks”: See page 65.“My Saved Page”: Displays all the browser screenshots saved in the handset memory.“Copy Text”: Copies the text on the WAP/Web page.“Reload Page”: Reloads the WAP/Web page to get updated information.“Go to URL”: Allows you to type in the URL of a site directly. Handset browser will go to the WAP/Web page that you entered.“Save Items”: Saves items from the browsing pages.“Fit To Screen Width”/“Actual Page Width”:Allows the browser to display in complete page mode or Virtual Screen mode.“Convenient Functions”: Displays functions for page operation.“Access History”: Shows previously browsed pages.“Flash®Menu”: Displays Flash® menu. (This option is available only when a Flash® file is displayed.)“SVG Menu”: Displays SVG menu. (This option is available only when a SVG file is displayed.)“Open in New Tab”: Opens a new window. (This option is available only when one window is opened and a URL link is highlighted.)“Tab Menu”: Displays the tab menu. (This option is available only when two or more windows are opened.)“Settings”: Displays the settings menu.“Help”: Displays the Help screen.“Exit”: Exits the browser.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-67.png)
![Gallery 67GalleryGallery contains all your pictures, music and videos. You can also transmit pictures, sounds and video clips via infrared or Bluetoothwireless technology to other OBEX-enabled devices.Picture GalleryViewing Pictures“Gallery” o “Picture Gallery”1. Select the file you wish to view.The selected picture is displayed.Note•To switch between viewing handset or memory card content, select the first item in the options menu.•When the motion control action setting for “Image Viewer” is set to “On” (p. 100), you can change the picture being displayed by shaking the phone sideways. This is only available when the phone is closed.Using Images as Wallpaper“Gallery” o “Picture Gallery”1. Highlight the file you wish to use as wallpaper.2. Press [Options] and select “Set as Wallpaper”.Editing Pictures“Gallery” o “Picture Gallery”1. Highlight the file you wish to edit.2. Press [Options] and select “Edit”.3. Select “Picture Editor” or “Composite”.4. Select the desired option.Note•“Picture Editor” may not be available depending on the original picture and copyright issued.Saving an Image to Phonebook EntriesThis option can only be used for pictures saved in the handset memory.“Gallery” o “Picture Gallery”1. Highlight the file you wish to add to Phonebook.2. Press [Options] and select “Add to Contacts”.To overwrite, select “As New Detail” and select the entry you wish to save.To save as a new entry, select “As New”.(M 6) (M 6-1)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-68.png)
![68 GalleryVideo GalleryPlaying Back Video Clip Files“Gallery” o “Video Gallery”1. Select the file you wish to play back.To pause playback, press B.To resume, press B again.To stop playback, press U.Note•To switch between viewing handset or memory card content, select the first item in the options menu.Using a Video Clip as a Ring Video ClipYou can set your video clip to play back when the phone rings.“Gallery” o “Video Gallery”1. Highlight the desired video clip.2. Press [Options] and select “Set as Ring Video”.SD VIDEOVideo clips with the “ASF” format that are recorded by a video camera can also be managed with SD VIDEO.“Gallery” o “SD VIDEO”1. Select the desired file.To pause playback, press B.To resume, press B again.To delete a file, highlight the file, press [Options] and select “Delete”.Note•By default, video clips are recorded in 3GP format. To enable SD VIDEO recording, change the setting in the Video Camera as shown below.[Options] o “Record Time/Size” o “SD VIDEO”Sound GalleryThe downloaded sound files and the AMR data recorded by Voice Recorder are managed in Sound Gallery. The default ringtones are not contained within Sound Gallery. Only the sound files that can be played back on the phone are stored in Sound Gallery.Playing Back Sound Files“Gallery” o “Sound Gallery”1. Select the file you wish to play back.To stop playback, press U.Note•Playback may not be available for some sound files.•To switch between viewing handset or memory card content, select the first item in the options menu.Using the Sound Files as a Ringtone“Gallery” o “Sound Gallery”1. Highlight the file you wish to use as a ringtone.2. Press [Options] and select “Set as ringtone”. (M 6-2) (M 6-3) (M 6-4)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-69.png)
![Gallery 69ThemesYou can easily customise the display by using the theme files.Note•Preset themes are not included in “Themes” in “Gallery”.Viewing Previews“Gallery” o “Themes”1. Highlight the theme file you wish to preview.2. Press B.The selected theme file is displayed.Note•To switch between viewing handset or memory card content, select the first item in the options menu.Setting a Theme“Gallery” o “Themes”1. Select the desired theme file.The selected theme file is set as the default theme.Flash®Playing Back Flash® Files“Gallery” o “Flash®”1. Select the file you wish to play back.To stop playback, press U.Note•Only Flash® files up to 150 KB can be played back.Using Flash® as Wallpaper“Gallery” o “Flash®”1. Highlight the file you wish to use as wallpaper.2. Press [Options] and select “Set as Wallpaper”.Using Flash® as a Ringtone“Gallery” o “Flash®”1. Highlight the file you wish to use as a ringtone.2. Press [Options] and select “Set as ringtone”.Other DocumentsOpening a Document File“Gallery” o “Other Documents”1. Select the desired file.Note•To switch between viewing handset or memory card content, select the first item in the options menu. (M 6-5) (M 6-7) (M 6-8)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-70.png)
![70 GalleryCommon Option MenusGallery contains the following folders.“Gallery” o “Picture Gallery”“Gallery” o “Video Gallery”“Gallery” o “SD VIDEO”“Gallery” o “Sound Gallery”“Gallery” o “Themes”“Gallery” o “Java™ Gallery”“Gallery” o “Flash®”“Gallery” o “Other Documents”Activating Files with Copyright Protection (DRM)Some pictures, sound files, video clips, Flash® files and theme files have a digital copy protection program, which is called DRM (Digital Rights Management). You need to activate the digital licence permission to open the files. Files protected with DRM are displayed with .1. Select the appropriate folder for the desired file type.2. Highlight the file you wish to activate.3. Press [Options] and select “Get Contents Key”.Note•Some pictures with DRM may not be opened even when an attempt is made to activate it.Sending Gallery Data1. Select the appropriate folder for the desired file type.2. Highlight the desired file.3. Press [Options] and select “Send”.4. Select “As Message”, “As Email”, “Bluetooth”, “Infrared” or “Send via IrSS”.Note•Pictures/Sounds/Video clips/Themes/Flash® files/Other Documents data protected by copyright cannot be sent attached to a message, with the exception of Separate Delivery files.•When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time.Receiving Gallery DataWhen the phone receives Gallery data, a confirmation message is displayed in standby.1. Select “Yes”.The received data is saved in the corresponding Gallery folder.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-71.png)
![Gallery 71Using Gallery Data1. Select the appropriate folder for the desired file type (p. 70).2. Highlight the desired file.3. Press [Options] and select “Manage Items”.4. Select the desired option.“Sort”: Sorts files according to a specific sequence.“Rename”: Renames the file or folder. “Create Folder”: Creates a new folder.“Change List View”: Changes the list view.“Check All”: Selects all files in the list.“Delete All”: Deletes all files in the folder.Note•“Manage Items” is not available for “Java™ Gallery”.To Delete the File1. Select the appropriate folder for the desired file type (p. 70).2. Highlight the desired file.3. Press [Options] and select “Delete”.To See the Gallery Details1. Select the appropriate folder for the desired file type (p. 70).2. Highlight the file you wish to view the details of.3. Press [Options] and select “Details”.Selecting Multiple Files1. Select the appropriate folder for the desired file type (p. 70).2. Highlight the file you wish to select.3. Press [Options] and select “Check”.4. Repeat steps 2 and 3 until you select all the desired files.Memory StatusHandset Memory: Pictures, Videos, Sound Gallery, Themes, Java™ Gallery, Flash®, Other Documents, Others, Total and FreeMemory Card: Pictures, Videos, Sound Gallery, Themes, Flash®, Other Documents, Others, Total and Free“Gallery” o “Memory Status”1. Select “Handset Memory” or “Memory Card”.Note•When a memory card is inserted into the phone, “Temp Card Folder” is additionally displayed above “Memory Status”. •The shortcut keys for “Temp Card Folder” is M 6-9 and the shortcut keys for “Memory Status” changes to M 6-10. (M 6-9)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-72.png)
![72 Java™Java™Java™ GalleryExecuting Applications“Java™”o “Java™ Gallery”1. Select the title of the application you wish to execute.2. To end the application, press F and select “End”.Setting as a Screensaver for the Display“Java™”o “Java™ Gallery”1. Highlight the file you wish to use as a screensaver.2. Press [Options] and select “Set as Screensaver”.Setting Permission“Java™”o “Java™ Gallery”1. Highlight the desired Java™ application.2. Press [Options] and select “Permission”.3. Select one of the following options:“Phone Call”: Sets permission to make voice calls.“Network Access”: Sets permission to access the network.“Messaging”: Sets permission to perform SMS messaging.“Autorun”: Sets permission to perform the Autorun function.“Use Multimedia”: Sets permission to use the multimedia recording.4. Select one of the following options:“Always Ask”: The confirmation message is displayed every time the security sensitive function is executed.“Ask Once”: The confirmation message is displayed the first time the security sensitive function is executed.“No”: Execution of the security sensitive function is not authorised.Note•Options displayed in step 4 depend on the item selected in step 3.•To clear all the permission settings, select “Reset” in step 3.•Some permissions are not available for some Java™applications. (M 1) (M 1-1)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-73.png)
![Java™ 73Viewing Application Information“Java™”o “Java™ Gallery”1. Highlight the desired Java™ application.2. Press [Options] and select “Information”.Deleting an Application“Java™”o “Java™ Gallery”1. Highlight the desired Java™ application.2. Press [Options] and select “Delete”.Java™ SettingsApplication Volume“Java™”o “Java™ Settings” o “Application Volume”1. Press a (or d) to increase the volume or press b (or c)to decrease the volume and then press B.Backlight“Java™”o “Java™ Settings” o “Backlight” o“Switch On/Off”1. Select from “Always On”, “Always Off” or “Normal Settings”.“Always On”: Lit while the application is operated.“Always Off”: Unlit while the application is operated even if a key is pressed.“Normal Settings”: Works with the main backlight setting (p. 95).To Set the Blinking OperationIf set to “Off”, the backlight cannot be controlled from the application.“Java™”o “Java™ Settings” o “Backlight” o “Blink”1. Select “On” or “Off”.Vibration“Java™”o “Java™ Settings” o “Vibration”1. Select “On” or “Off”. (M 1-2)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-74.png)
![76 OrganiserOrganiserCalendarCreating a New Entry“Organiser” o “Tools 1” tab o “Calendar”1. Select the desired day to which you want to add an event.2. Select “Add New Entry”.3. Enter the subject.4. Enter the start date and time.5. Select the desired category.6. Select the reminder time.When selecting “Other”, enter the desired reminder date and time.7. Press [Save].Note•If the date and time settings have not been entered, the date and time entry screen is displayed (p. 99).•The reminder will not sound when the profile is set to “Silent”, but will sound when “General Volume” (p. 97) is set to “Silent”.•You can display the Stamp screen by pressing H in the monthly calendar view. Select the desired category and press B.To Change the Settings1. Select the item you wish to change in the New Entry screen.• “Reminder”: Sets options including “Reminder Time”, “Assign Tone/Video” and “Duration” for the reminder.• “Repeat”: Sets the number of times the reminder sounds.• “Location”: Sets the location for the schedule entry.• “Description”: Enables entering a memo for the schedule entry.• “Secret”: Sets to show or hide the schedule entry. Set to “On” to make the data secret or select “Off” to leave it as it is.Viewing a Schedule Entry“Organiser” o “Tools 1” tab o “Calendar”1. Select the day you wish to view.2. Select the desired entry. (M 3) (M 3-1)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-77.png)
![Organiser 77To Search by Date1. In any view, press [Options] and select “Go to”.2. Select “Today” to display today or “Enter Date” to enter the desired date.Tip•You can control the view by using the following:Monthly or 2-month viewP: Displays the previous month or previous screen.R: Displays the next month or next screen.Q: Displays the Help screen.H: Displays the Stamp screen (monthly view only).J: Displays the Set Colour screen.K: Moves the cursor to today.L: Displays the Find (By Subject) screen.N: Displays the Go to (Enter Date) screen.O: Displays the Find (By Category) screen.c/d: Moves the cursor to left (the previous day) or to right (the next day).a/b: Moves the cursor upward (last week) or downward (next week).Weekly viewP: Displays the previous week.R: Displays the next week.Q: Displays the Help screen.J: Displays the Set Colour screen.K: Moves the cursor to today.L: Displays the Find (By Subject) screen.N: Displays the Go to (Enter Date) screen.O: Displays the Find (By Category) screen.c/d: Moves the cursor to left (the previous day) or to right (the next day).a/b: Moves the weekly view up or down (the previous hour or next hour).Setting a ColourYou can highlight a date or days of the week with seven colour options.“Organiser” o “Tools 1” tab o “Calendar”For Date Colour1. Press [Options] and select “Calendar Settings”.2. Select “Set Colour”.3. Select “By Date”.4. Select the desired colour.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-78.png)
![78 OrganiserFor Days of the Week Colour1. Press [Options] and select “Calendar Settings”.2. Select “Set Colour”.3. Select “By Week” and then select days of the week you wish to colour.4. Select the desired colour.Note•If the same date is set with both a date colour and a day of the week colour, the date is highlighted in the date colour.•Up to 100 days can be set for the highlights.Setting a HolidayYou can set personal holidays in the calendar.“Organiser” o “Tools 1” tab o “Calendar”1. Press [Options] and select “Calendar Settings”.2. Select “Set Holiday”.3. Enter the name.4. Enter the date.5. Select the desired frequency.6. Press [Save].Finding a Schedule EntryTo Search by a Subject“Organiser” o “Tools 1” tab o “Calendar”1. In any view, press [Options] and select “Find”.2. Select “By Subject”.3. Enter a few letters of the subject.Search results are displayed in time order.To Search by a Category“Organiser” o “Tools 1” tab o “Calendar”1. In any view, press [Options] and select “Find”.2. Select “By Category”.3. Select a desired category.Search results are displayed in time order.Editing a Schedule Entry“Organiser” o “Tools 1” tab o “Calendar”1. Select the day you wish to edit.2. Highlight the entry you wish to edit, press [Options], then select “Edit”.3. Select the desired item and modify the entry.4. Press [Save].](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-79.png)
![Organiser 79Deleting Schedule Entries1. In any view, press [Options] and select “Delete”.2. Select the desired option.“This Appointment” (daily view):Deletes the selected entry.“All This Day”: Deletes all entries for the selected day.“All This Month” (monthly view): Deletes all entries for the selected month.“Last Two Months” (2-month view):Deletes all entries for the selected two months.“All This Week” (weekly view):Deletes all entries for the selected week.“Up to Last Month” (monthly view): Deletes all entries before the selected month.“Up to Last Week” (weekly view): Delete all entries before the selected week.“All Appointments”: Deletes all entries in this application.Sending a Schedule Entry“Organiser” o “Tools 1” tab o “Calendar”1. Select the day including schedule entries you wish to send.2. Highlight the entry you wish to send, press [Options], then select “Send”.3. Select “As Message”, “As Email”, “Via Bluetooth” or “Via Infrared”.For “Via Bluetooth”For details, see “Bluetooth” on page 113.For “Via Infrared”For details, see “Infrared” on page 115.Note•When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time.Receiving a Schedule Entry1. Select “Yes”.The received entry is saved in the Calendar.Select “No” to reject.Viewing the Memory Status1. In any view, press [Options] and select “Memory Status”.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-80.png)
![80 OrganiserAlarmsSetting the Alarms“Organiser” o “Tools 1” tab o “Alarms”1.Select the blank line (--:--) you wish to set an alarm to.2. Enter the desired time.3. Press [Save].To Change the Settings1. Select the item you wish to change in the Set Alarm screen.• “Subject”:Sets the subject for the alarm setting.•“Repeat”:Sets the number of times the alarm sounds.• “Assign Tone/Video”:Assigns a tone or video clip file to the alarm.• “Snooze”:Sets the snooze option.• “Alarm Volume”:Sets the desired volume.The alarm will not sound when “Alarm Volume” is set to “Silent”. • “Vibration”:Sets the vibration pattern of the alarm.For details on selecting a vibration, see “Vibration” on page 98.•“Duration”:Sets the duration of the alarm.Resetting an Alarm“Organiser” o “Tools 1” tab o “Alarms”1. Highlight the alarm you wish to reset.2. Press [Options] and select “Reset Alarm”.Resetting All Alarms“Organiser” o “Tools 1” tab o “Alarms”1. Highlight an alarm.2. Press [Options] and select “Clear All”.Setting for Silent Profile“Organiser” o “Tools 1” tab o “Alarms” o “Settings”1. Select “For Silent Profile”.2. Select “Ring” or “Do not Ring”.Setting the Alarm to the World Clock Time“Organiser” o “Tools 1” tab o “Alarms” o “Settings”1. Select “Link to World Clk”.2. Select “On” or “Off”. (M 3-2)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-81.png)
![Organiser 81TasksCreating a New Entry“Organiser” o “Tools 1” tab o “Tasks”1. Select “Add New Entry”.2. Enter the subject.3. Enter the due date and time.4. Press [Save].Note•If the date and time settings have not been entered, the date and time entry screen is displayed (p. 99).To Select the Reminder Time1. On the New Entry screen, select “Reminder”.2. Select “Reminder Time”.3. Select the reminder time.When selecting “Other”, enter the desired reminder date and time.To Change the Type of Alarm Tone or Video Clip File1. On the New Entry screen, select “Reminder”.2. Select “Assign Tone/Video”.3. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or “Flash®”.4. Select the desired tone or video clip file.For details on selecting a ringtone or a ring video clip, see “Assigning a Ringtone for an Incoming Call” or “Assigning a Ring Video Clip for an Incoming Call” on page 97.To Change the Duration of Alarm Tone or Video1. On the New Entry screen, select “Reminder”.2. Select “Duration”.3. Select the desired duration.To Set the Alarm Volume“Organiser” o “Tools 1” tab o “Tasks”1. Press [Options] and select “Alarm Settings”.2. Select “Alarm Volume”.3. Press a (or d) to increase the volume or press b (or c)to decrease the volume and then press B.To Set the Vibration“Organiser” o “Tools 1” tab o “Tasks”1. Press [Options] and select “Alarm Settings”.2. Select “Vibration”.3. Select “On”, “Link to Sound” or “Off”. (M 3-3)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-82.png)
![82 OrganiserTo Set for the Silent Profile“Organiser” o “Tools 1” tab o “Tasks”1. Press [Options] and select “Alarm Settings”.2. Select “For Silent Profile”.3. Select “Ring” or “Do not Ring”.To Set the Priority1. On the New Entry screen, select “Priority”.2. Select “Normal”, “High” or “Low”.To Change the Description1. On the New Entry screen, select “Description”.2. Enter a memo for the task entry.To Make the Entry Secret1. On the New Entry screen, select “Secret”.2. Select “On” to make the data secret or select “Off” to leave it as it is.To Unlock the Secret Settings Temporarily“Organiser” o “Tools 1” tab o “Tasks”1. Press [Options] and select “Unlock Temporarily”.Note•Once the phone has returned to standby, the temporarily unlocked tasks are reset as secret data.Making the Entry as Completed or Uncompleted“Organiser” o “Tools 1” tab o “Tasks”1. Highlight the desired entry.2. Press [Done].To make the entry incomplete, press [Not Yet].Finding a Task EntryTo Search by a Subject“Organiser” o “Tools 1” tab o “Tasks”1. Press [Options] and select “Find”.2. Select “By Subject”.3. Enter a few letters of the subject and press B.Search results are displayed in time order.To Search by a Due Date“Organiser” o “Tools 1” tab o “Tasks”1. Press [Options] and select “Find”.2. Select “By Due Date”.3. Select a desired due date and press B.Search results are displayed in time order.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-83.png)
![Organiser 83Sending a Task Entry“Organiser” o “Tools 1” tab o “Tasks”1. Highlight the task entry you wish to send.2. Press [Options] and select “Send”.3. Select “As Message”, “As Email”, “Via Bluetooth” or “Via Infrared”.For “Via Bluetooth”For details, see “Bluetooth” on page 113.For “Via Infrared”For details, see “Infrared” on page 115.Note•When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time.Viewing the Memory Status“Organiser” o “Tools 1” tab o “Tasks”1. Press [Options] and select “Memory Status”.Deleting Entries“Organiser” o “Tools 1” tab o “Tasks” o [Options] o“Delete”1. Select the desired option.“This Task”: Deletes the selected entry.“All Completed Tasks”: Deletes all checked entries.“All Tasks”: Deletes all entries.Calculator“Organiser” o “Tools 1” tab o “Calculator”Key operations for calculation are as follows:To enter a decimal point, press P.To clear the entered number or function, press U.To do the calculations, press B.To start a new calculation, press U. (M 3-4)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-84.png)
![84 OrganiserRate ConversionTo Set a Currency Conversion Rate“Organiser” o “Tools 1” tab o “Calculator” o [Options] o “Currency Converter” o “Exchange Rate”1. Select “Domestic” or “Foreign”.2. Enter the domestic or foreign currency.To Convert a Value“Organiser” o “Tools 1” tab o “Calculator”1. Enter the value to be converted.2. Press [Options] and select “Currency Converter”.3. Select “Convert to Domestic” or “Convert to Foreign”.Expenses MemoRecording in the Expenses Memo“Organiser” o “Tools 1” tab o “Expenses Memo” o “Add New Expense”1. Enter the expenses using the digit keys.2. Select the desired category.Expenses memo is registered.Viewing Totals“Organiser” o “Tools 1” tab o “Expenses Memo” o“Totals”Recorded expenses are displayed on the screen.To Change Category1. In the total view, highlight the desired item.2. Press [Change].3. Select the desired category.To Change Amount1. In the total view, highlight the desired item.2. Press [Options] and select “Change Amount”.3. Enter the desired amount using the digit keys.To Delete a Recorded Item or All Items1. In the total view, highlight the desired item.2. Press [Options] and select “Delete Item” or “Delete All”.Editing the Category Name“Organiser” o “Tools 1” tab o “Expenses Memo” o “Edit Category”1. Select the desired category name.2. Modify the name. (M 3-5) (M 3-5-1) (M 3-5-2) (M 3-5-3)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-85.png)
![Organiser 85StopwatchYou can store 4 lap times when using the stopwatch function.“Organiser” o “Tools 2” tab o “Stopwatch”1. Press [Start].Press [LAP] to view the lap time before the stopwatch stops. Last 4 lap times are saved.2. Press [Stop].Resetting the Time1. After stopping the stopwatch, press [Options] and select “Reset”.Countdown Timer“Organiser” o “Tools 2” tab o “Countdown Timer”1. Enter the time to count.You can set the time from 1 second to 60 minutes.2. Press [Start].Press [Suspend] to pause the countdown.Press [Resume] to continue counting.3. When the countdown has finished, press [Stop] and then press [Start] to start the countdown again.Editing the Countdown Time1. In the countdown start screen, press [Options] and select “Edit”.2. Modify the desired time.World ClockSetting the Time Zone“Organiser” o “Tools 2” tab o “World Clock”1. Press [Edit] and select “Set Time Zone”.The current time zone is indicated by red line on the world map.2. Press c or d to change the time zone.3. Press [Accept].To Set the Custom Time Zone“Organiser” o “Tools 2” tab o “World Clock”1. Press [Edit] and select “Set Time Zone”.2. Press [Custom].3. Enter the desired city name and time difference.Setting Daylight Saving“Organiser” o “Tools 2” tab o “World Clock”1. Press [Edit] and select “Daylight Saving”.2. Select “On” or “Off”. (M 3-d-1) (M 3-d-2) (M 3-d-3)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-86.png)
![86 OrganiserHour MinderHour Minder function informs you of the time by sounding a tone.“Organiser” o “Tools 2” tab o “Hour Minder”1. Select “Switch On/Off”.2. Select “On” or “Off”.3. Select “Select Time”.4. Select the desired time.5. Press [Save].To Change the Settings“Organiser”o “Tools 2” tab o “Hour Minder”1. Select “Advanced”.2. Select the item you wish to change.“Assign Tone/Video”: Sets the tone or video.“Volume”: Sets the volume of the tone.“Vibration”: Sets the vibration.“Duration”: Sets the duration.“For Silent Profile”: Sets whether to sound the tone when the profile is set to “Silent”.“Link to World Clk”: Sets to sound the tone according to the time of the World Clock.Document ViewerYou can view PC documents.“Organiser” o “Tools 3” tab o “Document Viewer”1. Select the file you wish to view.To cancel reading, press U or C.Note•You can view the following types of files with the document viewer: PDF (.pdf), Microsoft Excel (.xls), Microsoft Word (.doc), Microsoft PowerPoint (.ppt).•For the shortcut keys that can be used in the document viewer, refer to the help by pressing [Options] and selecting “Help”.•A file of up to 10 MB can be opened.•Some files may not be displayed correctly depending on the type or size, such as a file of vertical text (not supported) or when the memory runs out while viewing a large document.•Some PDF files may not be displayed correctly due to a shortage of memory even if the file size is not large when numerous fonts are embedded or image data is pasted.•Depending on how the PDF document was created, some characters in a PDF file may not be displayed.•Document files that are saved in Gallery or linked in a WAP/Web page can be viewed with the document viewer. (M 3-d-4) (M 3-d-d-1)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-87.png)
![Organiser 87•When the motion control setting for “Document Viewer” is set to “On” (p. 100), you can zoom in or zoom out by tilting the phone forward or backward. This is only available when the phone is closed.•Document files that are protected with a password cannot be viewed with the document viewer.Text TemplatesYou can register up to 500 text templates for use in text messages and multimedia messages. The maximum capacity of the text templates is 8192 characters.Adding Phrases to Text Templates“Organiser” o“Tools 3” tab o “Text Templates” o “Add New Template”1. Enter the text.2. Select the desired category.Editing Text Templates“Organiser” o“Tools 3” tab o “Text Templates”1. Highlight the text template you wish to edit.2. Press [Options] and select “Edit Text”.To view the text template, press B.To delete the text template, press [Options] and select “Delete”.3. Modify the text and press B.Changing the Category“Organiser” o“Tools 3” tab o “Text Templates”1. Highlight the desired text template.2. Press [Options] and select “Change Category”.3. Select the desired category.Sending Text Templates“Organiser” o“Tools 3” tab o “Text Templates”1. Highlight the text template you wish to send.2. Press [Options] and select “Send Template”.3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.For “Via Bluetooth”For details, see “Bluetooth” on page 113.For “Via Infrared”For details, see “Infrared” on page 115. (M 3-d-d-2)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-88.png)
![88 OrganiserVoice RecorderThe recorded voice clip is saved in Sound Gallery. Voice clips are saved in .amr format.Recording a Voice Clip“Organiser” o“Tools 3” tab o “Voice Recorder” 1. Press B to start recording.To stop recording before the recording time is over, press B.2. Select “Save” to save the voice clip.Note•Press a (or V) or b (or W) to adjust the sound volume when playing back the recorded file.Sending Voice Clips“Organiser” o“Tools 3” tab o “Voice Recorder” 1. Press B to start recording.To stop recording before the recording time is over, press B.2. Select “Save and Send”.Selecting the Record Time“Organiser” o“Tools 3” tab o “Voice Recorder” o[Options] o “Record Time”1. Select “For Message” or “Extended Voice”.When selecting “Extended Voice”, voice clips are automatically saved in the memory card.Selecting Storage Memory“Organiser” o“Tools 3” tab o “Voice Recorder” o[Options] o “Save Recording to”1. Select the desired location.When selecting “Choice”, you can select the location when saving a voice clip.ScannerWith the built-in digital camera, you can read barcodes in QR code format and also read the text on business cards. The scanned data can be saved as a Phonebook entry, URL, Email address and text.Note•When scanning does not take place, it may be due to one of the following reasons: type or size of barcode or business card, scratches, dirt, damage, print quality, light reflection, etc. (M 3-d-d-3) (M 3-d-d-4)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-89.png)
![Organiser 89Reading Barcodes“Organiser” o“Tools 3” tab o“Scanner” o“Scan Barcode”1. Display the barcode using the camera.2. Press [Scan].3. Press [Options] and select the desired option.The options vary depending on the scanned data.“Save”: The result is saved.“Send Message”: The result is sent as SMS or MMS.“Save to Templates”:The result is saved as text.“Copy”: The result is copied.To Use the Continuous Scanning1. In scanning mode, press [Options] and select “Continuous Scan”.2. Select “On” or “Off”.Scanning Business Cards“Organiser” o“Tools 3” tab o“Scanner” o“Scan Card”1. Frame the business card in the centre of the screen using the camera and press [Read].To cancel scanning, press [Back] or U.2. Press [Scan] or B.The scanned results are displayed.3. Press [Assign].The scanned data is saved to Phonebook.When the number of characters that can be scanned is exceeded, select “Yes”.To paste the scanned data to a message, press [Options] and select “Send Message”.To save the scanned data as a text template, press [Options] and select “Save to Templates”.To copy the scanned data, press [Options] and select “Copy”.Note•Only Simplified Chinese and alphanumerical characters can be scanned.•The following items can be saved to a Phonebook entry: name, phone number, fax number, Email address, postal address, postal code, company name, division, post, URL address, notes (date scanned, etc.).•Depending on the business card, the contents may not be scanned or recognized (read) correctly, and characters and symbols not on the business card may be included in the scanned results.•Text cannot be scanned from business cards:•With background designs•That are handwritten or have handwriting-like font•That have both horizontal and vertical text•That are shown in a display](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-90.png)
![90 Organiser•Scanning may not take place in the following cases:•The contrast between the text and background is low.•There is extremely small font used on the business card.•Italics, ancient characters or irregular characters are used on the business card.•The business card is printed on glossy paper.•Logos or logo-type characters are used on the business card.•Characters are extremely close to each other or are touching.•The scanned data may not be classified as the correct item.•The + symbol for an international number may not be saved to the Phonebook even if it is scanned from the business card.•Make sure the business card is displayed completely in the screen. Be sure that objects other than the business card (especially those with text) are not displayed in the screen.•Scanning is easier when the font displayed is larger, however, if the camera is placed too close to the business card, the text will become out of focus. Hold the camera at least 10 cm away from the business card.•Up to 5 phone numbers and 5 Email addresses can be saved in a Phonebook entry.To Select the Focus Mode“Organiser” o“Tools 3” tab o“Scanner” o“Scan Card”1. Press [Options] and select “Focus”.2. Select “Auto Focus”, “Macro” or “Manual Focus”.To Set the Mobile Light“Organiser” o“Tools 3” tab o“Scanner” o“Scan Card”1. Press [Options] and select “Mobile Light”.2. Select “On” or “Off”.To Adjust the Exposure“Organiser” o“Tools 3” tab o“Scanner” o“Scan Card”1. Press [Options] and select “Exposure”.2. Select the desired exposure.Viewing the Scanned Data“Organiser” o“Tools 3” tab o“Scanner” o“Scanned Results”1. Highlight the data you wish to view, then press [View].Phone Help“Organiser” o “Tools 3” tab o “Phone Help”1. Select “Settings Method”, “Common Functions” or “Key Operation”.2. Press a or b. (M 3-d-d-5)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-91.png)
![92 SettingsSettingsPhone SettingsSetting a ProfileThere are 4 profiles: “Normal”, “Car”, “Silent” and “Original”.Activating a Profile“Settings” o “Phone Settings” tab o “Profiles” 1. Select the desired profile.Note•When a profile is set, the corresponding indicator described on page 21 is displayed in standby.•For “Silent” and “Car” profiles, some of the settings, such as volume level, cannot be changed.Resetting Profile Settings“Settings” o “Phone Settings” tab o “Profiles” 1. Highlight the profile you wish to reset.2. Press [Reset].3. Enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.Event Light“Settings” o “Phone Settings” tab o “Profiles”1. Highlight “Car”, “Silent” or “Original”.2. Press [Edit].3. Select “Event Light”.4. Select the desired option.“For Voice Call”: Flashes when an incoming voice call is received.“For New Message”: Flashes when a new message is received.“Java Start”: Flashes when Bluetooth notification is received.“Delivery Report”: Flashes when a delivery report is received.Status Light“Settings” o “Phone Settings” tab o “Profiles”1. Highlight “Car”, “Silent” or “Original”.2. Press [Edit].3. Select “Status Light”. (M 9)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-93.png)
![Settings 934. Select the desired option.“For Missed Call”: Flashes when an incoming voice call is missed.“For New Message”: Flashes when a new message is missed.“For Answer Phone”: Flashes when a new answer phone message is saved.“Java Start”: Flashes when Bluetooth notification is missed.“Delivery Report”: Flashes when a delivery report is missed.Any Key AnswerFor details, see page 30.“Settings” o “Phone Settings” tab o “Profiles”1. Highlight “Car”, “Silent” or “Original”.2. Press [Edit].3. Select “Any Key Answer”.4. Select “On” or “Off”.Answer PhoneFor details, see page 103.“Settings” o “Phone Settings” tab o “Profiles”1. Highlight “Silent” or “Original”.2. Press [Edit].3. Select “Answer Phone”.4. Select “On” or “Off”.Setting the DisplayYou can change the display settings.Setting the Wallpaper“Settings” o “Phone Settings” tab o “Display Settings” o “Wallpaper”1. Select “Vertical” or “Horizontal”.2. Select the folder in which the picture you wish to set is contained.Pictures can be selected from “Preset Pictures”, “Picture Gallery”, “Flash®” or “Other Documents”.3. Select the desired picture.4. After displaying the picture, press B.Note•Some pictures cannot be used because of their picture and data types.•Wallpaper can be linked to a theme. Select “Link to Theme” in step 2. (M 9-2-1)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-94.png)
![96 SettingsTo Set the Screen Time Out when the Phone is Closed“Settings” o “Phone Settings” tab o “Display Settings” o “Display Manner”1. Select “Lights out period”.2. Enter the start time and end time.3. Press [Save].Note•Enter the start and end times according to the format set in “Time Format”.•If the clock settings have not been entered, the date and time entry screen is displayed (p. 99).Setting the Display Time when the Phone is ClosedYou can specify a desired time to elapse before the backlight and screen turn off after the slider is closed.“Settings” o “Phone Settings” tab o “Display Settings” o “CLS Disp. Time”1. Select the desired option.“1 sec.”: The screen turns off after 1 second.“3 sec.”: The screen turns off after 3 seconds.“5 sec.”: The screen turns off after 5 seconds.“10 sec.”:The backlight turns off after 5 seconds, and the screen turns off after 10 seconds.“Follow the Settings”: The backlight and screen turn off according to normal settings.Note•Regardless of the Keypad Lock setting, the screen turns off after 5 seconds.Setting the Caller DisplayYou can set the phone to show or hide the caller’s number when the slider is closed. “Settings” o “Phone Settings” tab o “Display Settings” o “Caller Display”1. Select “On” or “Off”.Select “Off” to hide the caller’s name and number.Setting the Dial Number“Settings” o “Phone Settings” tab o “Display Settings” o “Dial Number”1. Select the desired type of dial number.Themes“Settings” o “Phone Settings” tab o “Themes”1. Select “Preset Themes” or “My Themes”.2. Select the desired theme file.(M 9-2-10) (M 9-2-11) (M 9-2-12) (M 9-3)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-97.png)
![Settings 97Sound Settings“Settings” o “Phone Settings” tab o “Sound Settings”Volume“Settings” o “Phone Settings” tab o “Sound Settings” 1. Select “Volume”.2. Select “For Incoming Call”, “For New Message”, “Java Start”, “Delivery Report” or “General Volume”.3. Press a (or d) to increase the ringer volume or press b(or c) to decrease the ringer volume and then press B.To select “Silent”, press b (or c) at level 1.Assigning a Ringtone for an Incoming Call“Settings” o “Phone Settings” tab o “Sound Settings” 1. Select “Ringtone/Ringvideos”.2. Select “For Voice Call”.3. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or “Flash®”.4. Highlight the ringtone you wish to use.To hear the demo play, press [Play].5. Press B.Note•Melodies can be selected from “Sound Gallery”, “Preset Sounds” or “Flash®”.Assigning a Ring Video Clip for an Incoming Call“Settings” o “Phone Settings” tab o “Sound Settings”1. Select “Ringtone/Ringvideos”.2. Select “For Voice Call”.3. Select “Video Gallery”.4. Highlight the ring video clip file you wish to use.To preview the file, press [Options] and select “Play”.5. Press B.Notification“Settings” o “Phone Settings” tab o “Sound Settings”1. Select “Ringtone/Ringvideos”.2. Select “For New Message”, “Java Start” or “Delivery Report”.3. Select “Assign Tone”.4. Select the desired folder.5. Highlight the desired ringtone or ring video clip.6. Press B.7. Select “For New Message”, “Java Start” or “Delivery Report”.8. Select “Duration”.9. Enter the desired duration of message notification in 2 digits using the digit keys.10. Press B. (M 9-4)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-98.png)
![Settings 99Surround Sound“Settings” o “Phone Settings” tab o “Sound Settings” o“Surround”1. Select “On” or “Off”.Date & Time“Settings” o “Phone Settings” tab o “Date & Time”1. Select “Set Date/Time”.2. Enter the day, month, year and time using the digit keys.To Set Daylight Saving“Settings” o “Phone Settings” tab o “Date & Time” o“Daylight Saving”1. Select “On” or “Off”.To Set the Time Zone“Settings” o “Phone Settings” tab o “Date & Time” o“Set Time Zone”1. Press c or d to select the home city to set.2. Press B.To Customise the Time Zone“Settings” o “Phone Settings” tab o “Date & Time” o“Set Time Zone”1. Press [Custom].2. Enter the city name.3. Enter the time-zone differences using the digit keys.Press a or b to switch between and .4. Press B.World ClockFor details, see page 85.To Select the Time Format“Settings” o “Phone Settings” tab o “Date & Time” o“Time Format”1. Select “24 Hour” or “12 Hour”.To Select the Date Format“Settings” o “Phone Settings” tab o “Date & Time” o“Date Format”1. Select from “D-M-Y”, “M-D-Y” or “Y-M-D”.To Select the Calendar Format“Settings” o “Phone Settings” tab o “Date & Time” o“Calendar Format”1. Select “Sunday-Saturday” or “Monday-Sunday”. (M 9-4-8) (M 9-5) (M 9-5-2) (M 9-5-4) (M 9-5-5) (M 9-5-6) (M 9-5-7)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-100.png)
![102 SettingsPhonebook LockThe Phonebook Lock function prevents unauthorised use of your Phonebook.Select “On” to lock or “Off” to unlock for “Phonebook Lock” and enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code”.History LockThe History Lock function prevents unauthorised access to Call Log. By setting this option on, Call Log cannot be viewed until the correct handset code is entered.Press [Check] to lock or [Uncheck] to unlock.Showing Secret DataBy setting this option on, the hidden data can be displayed.Select “On” to display or “Off” to hide for “Show Secret Data”. Enter your handset code when you select “On”.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code”.Change Handset CodeThe default handset code is “9999”.Select “Change Handset Code” and enter the old handset code, then enter a new handset code twice.Slider SettingsYou can set the action when sliding open or sliding close your phone.“Settings” o “Phone Settings” tab o “Slider Settings”To Set the Open Action for Calling1. Select “Calls on Open” and select the desired option. “On”: Enables answering an incoming call by sliding open the phone.“Off”: Disables answering an incoming call by sliding open the phone.To Set the Close Action for Calling1. Select “Calls on Close” and select the desired option. “Continue Call”: Disables terminating a call by sliding close the phone.“End Call”: Enables terminating a call by sliding close the phone.To Set the Close Action for Locking1. Select “Lock on Close” and select the desired option.2. Select “No Action” or “Immediate”. “No Action”: Disables locking the phone by sliding it close.“Immediate”: Enables locking the phone by sliding it close. (M 9-12)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-103.png)
![Settings 103Master Reset“Settings” o “Phone Settings” tab o “Master Reset” o“Reset Settings”1. Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.Note•Some settings are not deleted by this function. Data stored in Phonebook, etc. is not deleted.To Reset All Settings for M1 to M12 and Delete All Created Data“Settings” o “Phone Settings” tab o “Master Reset” o“Reset All”1. Enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.Call SettingsAnswer PhoneWhen you cannot answer a call, you can record the caller’s message on your phone. After the answering message is played back, the caller can record a message. You can also use this function to record the caller’s voice during a call.“Settings” o “Call Settings” tab o “Answer Phone”1. Select “Switch On/Off”.2. Select “On” to enable this function.3. Select one of the following options, if necessary. “Answer Time”: Sets the time before the answering message is played back when this function is enabled. “Guidance Message”: The contents of the answering message can be checked.“Volume”: Sets whether or not to play the caller’s message while it is being recorded.Note•The Answer Phone function is not available when the power is turned off or when the phone is outside the service area.•Press F while receiving an incoming call to put the call on hold.Tip•Long press U in standby to enable or disable the Answer Phone function.•During a call, press [Options] and select “Record” to record the caller’s voice.•You can enable Answer Phone for the profiles “Silent” and “Original”.•Answer Phone is always enabled for the “Car” profile. (M 9-13-2) (M 9-d-1)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-104.png)
![106 SettingsTo Cancel Settings“Settings” o “Call Settings” tab o “Restrict Calls”1. Select “Outgoing Calls” or “Incoming Calls”.2. Select “Cancel All”.3. Enter the network password.Fixed Dialling NumbersThis option is available on most SIM cards for mobile phones. It allows you to configure a SIM card so that it can only be used to make calls to numbers on a predefined list.Note•This service depends on the SIM card.To Enable Fixed Dialling Numbers“Settings” o “Call Settings” tab o “Restrict Calls” o“FDN”1. Select “Switch On/Off”.2. Select “On” to enable this function.3. Enter your PIN2 code.To Add a New Name“Settings” o “Call Settings” tab o “Restrict Calls” o“FDN”1. Select “Edit Dial List”.2. Select a blank field.3. Enter your PIN2 code.4. Add a name and a phone number.For details on adding a name and phone number, see “Adding a New Entry” on page 39.5. Press [Save].Rejecting an Incoming CallTo Reject the Registered Number“Settings” o “Call Settings” tab o “Restrict Calls” o“Rejected Numbers” o“Switch On/Off”1. Select “On” or “Off”.To Register the Rejected Number“Settings” o “Call Settings” tab o “Restrict Calls” o“Rejected Numbers” o“Set Rejecting Number”1. Select a blank field.2. Enter the desired number.Rejecting a Call when the Caller’s Number is Withheld“Settings” o “Call Settings” tab o “Restrict Calls” o“Withheld Call” 1. Select “On” or “Off”.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-107.png)
![110 SettingsClearing DNS Cache“Settings” o “Network Settings” tab o “Internet Settings” o “Clear DNS Cache”To Activate the Browser/Java™/Streaming Profile“Settings” o “Network Settings” tab o “Internet Settings”1. Select “Browser Settings”, “Java™ Settings” or “Streaming Settings”.2. Select the desired profile you wish to activate.To Edit/View/Copy/Delete the Browser/Java™/Streaming/Proxy/Access Point Profile“Settings” o “Network Settings” tab o “Internet Settings”1. Select “Browser Settings”, “Java™ Settings”, “Streaming Settings”, “Proxy Settings” or “Access Point Settings”.2. Highlight the desired profile.3. Press [Options] and select the desired option.“Edit”: Modify the desired item.“View”: Confirm the data.“Copy”: Enter the new file name.“Delete”: Select “Yes” to delete. (M 9-d-d-3-6)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-111.png)
![Call Log 111Call LogThe phone will record the last 30 missed calls, received calls and dialled numbers.Viewing Call Log“Call Log”1. Select from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”.The selected call log list is displayed.To switch logs, press c or d.2. Select the phone number you wish to view.If you wish to dial the number, press D to make a voice call.Sending Messages1. In the call log list, highlight the phone number or name you wish to send a message to.2. Press [Options] and select “Create Message”.For details on creating a message, see “Creating a New Message” on page 55.Deleting a Call Log1. In the call log list, press [Options] and select “Delete” or “Delete All”.Call TimersChecking the Duration of the Last Call and All Calls“Call Log” o “Call Timers”1. Select “Dialled Calls” or “Received Calls”.Resetting Call Timers“Call Log” o “Call Timers” o “Clear Timers”1. Enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.Call CostsSome networks do not support Charging Advice. Please check with your service provider for availability.Checking the Cost of the Last Call“Call Log” o “Call Costs” o “Last Call”Checking the Total Call Cost“Call Log” o “Call Costs” o “All Calls”Setting the Charge Rate“Call Log” o “Call Costs” o “Cost Units” o “Set Units”1. Enter your PIN2 code.2. Enter a currency unit (up to 3 characters).3. Enter a cost per unit.To enter a decimal point, press P.Setting the Charge Limit“Call Log” o “Call Costs” o “Max Cost” o “Set Limit”1. Enter your PIN2 code.2. Enter a value. (M 11) (M 11-5) (M 11-5-3) (M 11-6) (M 11-6-1) (M 11-6-2)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-112.png)
![Connectivity 113ConnectivityBluetoothKeep your phone within a distance of 10 metres from the other Bluetooth wireless technology enabled device before searching.Using the Bluetooth Wireless FunctionTo Turn On or Off the Bluetooth Wireless Function“Connectivity” o “Bluetooth” o “Switch On/Off”1. Select “On” or “Off”.When “On” is selected, the Bluetooth wireless setting is activated, and “ ” is displayed.To Search for Devices to be PairedA maximum of 16 devices can be searched for.“Connectivity” o “Bluetooth” o “Search for Devices”1. Select the desired device for pairing.2. Enter the device passcode.Note•You can search for devices even when the Bluetooth wireless function is off. Once pairing is started, the phone turns the Bluetooth wireless function on automatically.•You can only select one device for pairing. To change the paired device, see “To Activate the Paired Device”.•Pairing means authentication has been established between the two devices.•In order to pair two devices with Bluetooth wireless technology, the users should agree on the same passcode for both devices.•The passcode is used only once, so there is no need to remember it. The passcode can be different each time the devices are connected.•Devices that do not have a user interface (i.e., headsets and car kits) have a factory-set passcode. See the user guide for the device.To Activate the Paired Device“Connectivity” o “Bluetooth” o “Paired Devices”1. Press d to switch to the list for handsfree devices. 2. Select the desired device you wish to activate.To Check the Paired Handsfree Devices“Connectivity” o “Bluetooth” o “Paired Devices”1. Press d to switch to the list for handsfree devices. 2. Highlight the desired handsfree device.3. Press [Options] and select “Set to Prior Connect”.To Check the Audio Device“Connectivity” o “Bluetooth” o “Paired Devices”1. Press d twice to switch to the list for audio devices.2. Highlight the desired audio device.3. Press [Options] and select “Set to Prior Connect”.(M 12) (M 12-1) (M 12-1-1) (M 12-1-2)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-114.png)
![114 ConnectivityTo Rename or Delete the Paired Devices “Connectivity” o “Bluetooth” o “Paired Devices”1. Press c or d to switch between all paired devices and handsfree devices. 2. Highlight the desired device.3. Press [Options].4. Select “Change Name” or “Delete”.You can rename or delete by pressing B after selecting desired device.To Send All Data to Other Devices“Connectivity” o “Bluetooth” o “Send All”1. Select the desired device.If a device is not specified, searching starts automatically.2. Enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.3. Select the desired data to send.4. Enter the device passcode for unpaired devices.Note•If the handsfree device is connected, the confirmation screen to deactivate the handsfree function is displayed. Select “Yes” to deactivate.Bluetooth Wireless SettingsTo Rename Your Phone“Connectivity” o “Bluetooth” o “Bluetooth Settings” o“Device Name”1. Enter the new device name.To Show or Hide Your Phone“Connectivity” o “Bluetooth” o “Bluetooth Settings” o“Visibility”1. Select the desired visibility settings.“Show My Phone”: Allows other devices to recognise your phone.“Hide My Phone”: Hides your phone from other devices.To Select the Sound Output“Connectivity” o “Bluetooth” o “Bluetooth Settings” o“Sound Output”1. Select “Phone/Earphone” or “Bluetooth Device”.To Switch the Handsfree Settings“Connectivity” o “Bluetooth” o “Bluetooth Settings” o“Handsfree Setting”1. Select “Handsfree Mode” or “Private Mode”.“Handsfree Mode”: For talking with the handsfree kit“Private Mode”: For talking with the phone (M 12-1-4) (M 12-1-5)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-115.png)
![116 ConnectivityCard SettingsFormatting Memory Card“Connectivity” o “Card Settings” o “Format Card”1. Enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.2. Select “Yes” to start formatting.Making a Backup FileWith a memory card inserted in your phone, you can back up data in Messages (Inbox, Drafts, Sent Messages), Call Manager, Message Groups, Calendar, Tasks, Text, and Bookmarks in the handset memory to the memory card. You can also restore the backup data from the memory card.“Connectivity” o “Card Settings” o “Backup/Restore” o“Backup”1. Enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.2. Check off the desired items to back up and press [Execute].To back up all files, press [Options] and select “Check All” to check off all items. Then press [Execute].Restoring a Backup File“Connectivity” o “Card Settings” o “Backup/Restore” o“Restore”1. Enter your handset code.The default handset code is “9999”. For details on changing the handset code, see “Change Handset Code” on page 102.2. Check off the desired items to restore and press [OK].To restore all files, press [Options] and select “Check All” to check off all items. Then press [OK].3. Select the desired file to restore and press [OK].A confirmation message indicating deletion from the handset memory is displayed.4. Select “Yes” to start restoring.Deleting a Backup File“Connectivity” o “Card Settings” o “Backup/Restore” o“File Management”1. Select the desired folder.2. Check off the desired files to delete and press [Delete].To delete all backup files, press [Options] and select “Check All” to check off all files. Then press [Delete].3. Select “Yes” to start deleting. (M 12-5) (M 12-5-2)](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-117.png)
![Connecting SH8010C to Your PC 117Connecting SH8010C to Your PCYou can use the following functions by connecting the SH8010C to your PC using a USB data cable or via Bluetooth wireless technology:• GSM/GPRS modem• Handset Manager for SH8010C• Music Manager for SH8010C• Sync Manager for SH8010CNote•Operation with software not provided by Sharp is not guaranteed.System RequirementsOperating System:Windows 2000*, Windows XP**, Windows Vista*Service Pack 4 or later** Service Pack 2 or laterSupported Software:Microsoft Outlook/Outlook ExpressInterface:USB port or Bluetooth wireless portCD-ROM driveTo use Music Manager, DirectX9 and Windows Media Player 9 or later are required.GSM/GPRS ModemYou can use SH8010C as a GSM/GPRS modem to access the Internet from your PC. Connect your phone to your PC via Bluetoothwireless technology or USB interface. Software installation on your PC is required. Modem via the USB Data Cable1. Insert the CD-ROM into your PC’s CD-ROM drive.The SH8010C CD-ROM screen is displayed.If the SH8010C CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM.2. Select the USB driver from the on-screen instructions of your CD-ROM, and start installation of USB driver software following the on-screen instructions of your CD-ROM.•During installation, the on-screen instructions ask you to connect your phone to your PC. Power on your phone and attach the phone to the USB port of your PC using the USB data cable.3. Follow the on-screen instructions to complete installation.4. Select the modem driver from the on-screen instructions of your CD-ROM, and install modem driver software following the on-screen instructions of your CD-ROM.5. Follow the on-screen instructions to use your phone as a modem driver.• When the on-screen instructions ask for the modem driver type, select the cable as a modem driver.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-118.png)
![118 Connecting SH8010C to Your PCModem via Bluetooth Connection1. Turn on the Bluetooth wireless function of your phone.For details, see “To Turn On or Off the Bluetooth Wireless Function” on page 113.2. Pair your PC with your phone.For details on pairing your PC with your phone, see “To Search for Devices to be Paired” on page 113.3. Insert the CD-ROM into your PC’s CD-ROM drive.The SH8010C CD-ROM screen is displayed.If the SH8010C CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM.4. Select the modem driver from the on-screen instructions of your CD-ROM, and install modem driver software following the on-screen instructions of your CD-ROM.5. Follow the on-screen instructions to use your phone as a modem driver.• When the on-screen instructions ask for the modem driver type, select Bluetooth as a modem driver.Note•Modem communication is not possible while communicating with the Handset Manager via Bluetooth wireless technology or USB interface.•It is not recommended that you make or answer calls when you are using SH8010C as a GSM/GPRS modem. The operation may be interrupted.•Your phone exhausts the battery when connected to a PC, even when not communicating.•For a detailed explanation on how to use the Modem driver, please click and refer to the help on the Modem Driver.Handset ManagerYou can transmit the following items between your phone and your PC, and can use Phonebook entries on your PC:• Gallery files (pictures/sounds/video clips/themes/Flash® data/Other Documents data)• Phonebook entries• Schedule entriesVia USB Data Cable1. Insert the CD-ROM into your PC’s CD-ROM drive.The SH8010C CD-ROM screen is displayed.If the SH8010C CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM.2. Select Handset Manager from the on-screen instructions of your CD-ROM, and start installation of Handset Manager software following the on-screen instructions of your CD-ROM.• If you have not installed the USB driver, follow steps 2 and 3 on page 117.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-119.png)
![Connecting SH8010C to Your PC 1193. Follow the on-screen instructions to complete installation.• During installation, the on-screen instructions ask you to select an interface. Select the USB data cable as an interface.4. Connect your phone to your PC. Power on your phone and attach the phone to the USB port of your PC using the USB data cable.5. Launch Handset Manager from the relevant folder.6. Enter your handset code.7. Follow the on-screen instructions of Handset Manager.Via Bluetooth1. Insert the CD-ROM into your PC’s CD-ROM drive.The SH8010C CD-ROM screen is displayed.If the SH8010C CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM.2. Select Handset Manager from the on-screen instructions of your CD-ROM, and start installation of Handset Manager software following the on-screen instructions of your CD-ROM.3. Follow the on-screen instructions to complete installation.• During installation, the on-screen instructions ask you to select an interface. Select Bluetooth as an interface.4. Launch Handset Manager from the relevant folder.5. Enter your handset code.6. Follow the on-screen instructions of Handset Manager.Note•Some large files may not be able to be transmitted from the PC to the phone.•Applications (Camera, Gallery, etc.) cannot be run when the phone is connected to the PC via Bluetooth wireless technology interface or USB data cable.•If you have already installed Sharp Handset Manager, you need to uninstall the previous one.•If you have trouble with installation, uninstall Handset Manager, restart your PC, reinstall Handset Manager and restart.•For details, see the User Guide Software which is installed within Handset Manager or our web-site, http://www.sharp-mobile.com.Music ManagerYou can manage the playlist and exchange sound files on your PC. Available files are the sound files in the following formats: MP3, AAC, 3GPP.](https://usermanual.wiki/Sharp/HRO00072.Manual/User-Guide-982159-Page-120.png)
