Sharp HRO00072 Cellular Transceiver User Manual 080716 sh8010c e

Download:
Mirror Download [FCC.gov]
Document ID	982159
Application ID	uEOK1efz6QHTLpkYQ71lSg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	174.38kB (2179785 bits)
Date Submitted	2008-08-07 00:00:00
Date Available	2008-09-21 00:00:00
Creation Date	2008-07-16 17:10:28
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-07-25 10:03:32
Document Title	080716_sh8010c_e.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	S108248

Declaration of Conformity
Hereby, Sharp Telecommunications of Europe Limited, declares
that this SH8010C is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the
following Internet address:
http://www.sharp-mobile.com
Sharp Telecommunications of Europe Ltd.
Azure House, Bagshot Road, Bracknell, Berkshire RG12 7QY UK
Introduction
Congratulations on your new Sharp SH8010C phone.
About This User Guide
This user guide is carefully designed to help you learn about your
phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent
written records of all important data. Data may be lost or altered
in virtually any electronic memory product under certain
circumstances. Therefore, we assume no responsibility for data
lost or otherwise rendered unusable, whether as a result of
improper use, repairs, defects, battery replacement, use after
the specified battery life has expired or any other cause.
• We assume no responsibility, directly or indirectly, for financial
losses or claims from third parties resulting from the use of this
product and any of its functions, such as stolen credit card
numbers, the loss or alteration of stored data, etc.
• All company and/or product names are trademarks and/or
registered trademarks of their respective holders.
• Screen layout may differ from that illustrated in this user guide.
• The information described in this user guide is subject to change
without notice.
• All the functions described in this user guide may not be
supported by all networks.
• We assume no responsibility for downloaded contents,
information, etc. from the network.
• Occasionally, a few black or bright pixels may appear on the
screen. Please note that this will not have any impact on any of
the features or on performance.
Intellectual Property Rights
According to copyright laws, the reproduction, alteration and use of
material which is protected by copyright (music, pictures, etc.) is
only permitted for personal or private use. If the user is not in
possession of more extensive copyright or has not received the
explicit permission from the copyright owner to reproduce, alter or
use a copy which has been made or modified in this way, this is
considered to be a violation of the copyright laws and gives the
copyright owner the right to claim for damages. For this reason,
avoid the illegal use of material which is protected by copyright.
Introduction
Powered by JBlend™ Copyright 1997-2008 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos are
trademarks or registered trademarks of Aplix Corporation in
Japan and other countries.
microSDHC and microSD logos are trademarks.
ÂŽ
Powered by Mascot Capsule /Micro3D Edition™
Mascot CapsuleÂŽ is a registered trademark of HI Corporation
Š2002-2008 HI Corporation. All Rights Reserved.
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,187,480, 5,818,437, 5,945,928, 5,953,541, 6,011,554, 6,286,064,
6,307,548, 6,307,549, and 6,636,162, 6,646,573, 6,970,599; Australia
Pat. Nos. 727539, 746674, 747901; Austria Pat. Nos. AT225534,
AT221222; Brazil P.I. No. 9609807-4; Canada Pat. Nos. 1,331,057,
2,227,904, 2,278,549, 2,302,595; Japan Pat. Nos. 3532780, 3492981;
United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No.
HK1010924; Republic of Singapore Pat. Nos. 51383, 66959, 71979;
European Pat. Nos. 1 010 057 (98903671.0), 1 018 069 (98950708.2);
Republic of Korea Pat. Nos. KR201211B1, KR226206B1, 402252; People’s
Republic of China Pat. No. ZL96196739.0; Mexico Pat. Nos. 208141,
216023, 218409; Russian Federation Pat. Nos. 2206118, 2214620,
2221268; and additional patents are pending worldwide.
CP8 PATENT
Introduction
The BluetoothÂŽ word mark and logos are registered trademarks owned by
the Bluetooth SIG, Inc. and any use of such marks by Sharp is under license.
Other trademarks and trade names are those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
This product contains NF Browser and NF Messaging Client of ACCESS CO.,
LTD.
Š 2008 ACCESS CO., LTD. All rights reserved.
ACCESS is a trademark or registered trademark of ACCESS CO., LTD. in the
United States, Japan and other countries.
This software is based in part on the work of the Independent JPEG Group.
MicrosoftÂŽ, WindowsÂŽ, Windows VistaÂŽ, OutlookÂŽ, PowerPointÂŽ and
ExcelÂŽ are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Microsoft Word is a product name of Microsoft Corporation in the United
States.
AdobeÂŽ and AcrobatÂŽ are trademarks of Adobe Systems Incorporated.
Adobe, the Adobe logo, FlashLite and the
FlashLite logo are either trademarks or
registered trademarks of Adobe Systems
Incorporated in the United States and/or
other countries.
Š 2003-2007 Adobe Systems Incorporated. All rights reserved.
“Document Viewer” is powered by Picsel
Technologies. Picsel, Picsel Powered, Picsel Cube
Logo, Picsel File Viewer and Picsel Document
Viewer are Trademarks or Registered Trademarks
of the Picsel Group of Companies.
IrSS™, IrSimple™ and IrSimpleShot™ are trademarks or registered
trademarks of the Infrared Data Association in the U.S.A. and/or in other
countries.
This product is licensed under the MPEG-4 Visual Patent Portfolio License for
the personal and non-commercial use of a consumer to (i) encode video in
compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii)
decode MPEG-4 Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a licensed
video provider. No license is granted or implied for any other use. Additional
information may be obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License
for encoding in compliance with the MPEG-4 Systems Standard, except that
an additional license and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media which is paid
for on a title by title basis and/or (ii) data which is paid for on a title by title
basis and is transmitted to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
Introduction
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
QR Code is a trademark of DENSO WAVE INCORPORATED.
Contains iType™ font engine and font from Monotype Imaging Inc.
MonotypeÂŽ is a trademark of Monotype Imaging Inc. registered in the U.S.
Patent and Trademark Office and may be registered in certain jurisdictions.
Introduction
Useful Functions and Services
Your phone offers you the following features:
• Advanced Super View (ASV) colour LCD display with images that
are clearer and easier to view.
• A built-in digital camera with an auto focus function for taking
pictures and video clips.
• A message function for reading and creating SMS messages.
• MMS (Multimedia Messaging Services) for sending picture,
sound and video messages to brighten someone’s day.
• Email for sending up to 300 KB and receiving mail with
attachments.
• A colour WAP/Web browser for accessing information on the
mobile Internet.
• Your own ringtones and ring video clips. You can use sound or
video clip files as a ringtone or ring video clip.
• A music player that can play back MP3, MPEG-4 and 3GPP
format sound files (supported codec of MPEG-4 or 3GPP are
AMR, AAC, AAC+, and AAC+e).
• Playback of downloaded sound and video clip files.
• A voice recorder function for recording and playing back voice
clips.
• A Bluetooth® wireless technology interface for establishing
contact and transmitting data with certain devices. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• An infrared interface for data communication. You can transmit
pictures, sounds, and video clips to OBEX-enabled phones.
• A schedule alarm for creating and sending schedule entries with
alarm settings.
• A microSD memory card slot that expands connectivity with a PC
using the memory card.
Introduction
Contents
Introduction ................................................................ 1
List of Menu Functions .............................................. 8
Your Phone ............................................................... 10
Optional Accessories ........................................... 10
Getting Started ......................................................... 11
Inserting/Removing the SIM Card and the
Battery ................................................................ 14
Charging the Battery ............................................ 15
Inserting/Removing the Memory Card ................... 16
Connecting the Handsfree Kit ............................... 17
Turning Your Phone On and Off ............................ 18
Slide Functions and Keypad Lock ......................... 19
Display Indicators ................................................ 20
Navigating Functions ............................................... 22
Main Menu ......................................................... 22
Operations in Open Position ................................. 23
Shortcut Keys ...................................................... 23
Shortcuts ............................................................ 24
Operations in Closed Position ............................... 25
Contents
Motion Control ..........................................................26
Voice Call Functions .................................................29
Entering Characters ..................................................33
Changing the Input Language ................................33
Changing the Input Method ...................................33
User Dictionary .....................................................36
Entering Pictograms and Symbols .........................38
Using Templates ..................................................38
Copying, Cutting and Pasting Text .........................38
Insert Phonebook Entries ......................................38
Call Manager .............................................................39
Sending a Message from the Phonebook ...............40
Multimedia ................................................................45
Camera ......................................................................49
Taking Pictures ....................................................49
Recording Video Clips ...........................................49
Common Functions in the Photo and Video Camera
Modes .................................................................49
Functions in Photo Camera Mode ..........................52
Functions in Video Camera Mode ..........................54
List of Menu Functions
SH8010C functions are listed below.
See relevant page for details of each function. The menu’s corresponding number is used for shortcuts. For details, see page 23.
Java™
Java™ Gallery
Java™ Settings
Java™
Information
Browser
Homepage
Go to URL
Bookmarks
My Saved Page
Access History
Browser Settings
p. 72
p. 73
p. 75
p. 64
p. 64
p. 64
p. 64
p. 64
p. 65
List of Menu Functions
3 Organiser
(Tab 1: Tools 1)
1 Calendar
2 Alarms
3 Tasks
4 Calculator
5 Expenses Memo
(Tab 2: Tools 2)
1 Stopwatch
2 Countdown Timer
3 World Clock
4 Hour Minder
(Tab 3: Tools 3)
1 Document Viewer
2 Text Templates
3 Voice Recorder
4 Scanner
5 Phone Help
p. 76
p. 80
p. 81
p. 83
p. 84
p. 85
p. 85
p. 85
p. 86
p. 86
p. 87
p. 88
p. 88
p. 90
Messages
Message
Email
Cell Broadcasts
Area Info
Messaging
Settings
6 Memory Status
5 Camera
p. 55
p. 55
p. 59
p. 60
p. 60
–
p. 49
Gallery
Picture Gallery
Video Gallery
SD VIDEO
Sound Gallery
Themes
Java™ Gallery
FlashÂŽ
Other Documents
Memory Status
p. 67
p. 68
p. 68
p. 68
p. 69
p. 72
p. 69
p. 69
p. 71
Multimedia
Music Player
Video Player
Streaming Player
p. 45
p. 46
p. 48
8
Call Manager
Phonebook
Add New
Play Messages
Call Voicemail
Manage Groups
My Card
Speed Dial List
Message Groups
Phonebook
Settings
10 Service Dialling
No.*
11 Advanced
p. 39
p. 39
p. 43
–
p. 43
p. 39
p. 44
p. 40
p. 39
p. 40
p. 41
9 Settings
(Tab 1: Phone Settings)
1 Profiles
2 Display Settings
3 Themes
4 Sound Settings
5 Date & Time
6 Language
7 Motion Control
8 Switch Ringtone
Output
9 Earpiece Volume
10 Change Menu
11 Security Settings
12 Slider Settings
13 Master Reset
(Tab 2: Call Settings)
1 Answer Phone
2 Voicemail & Diverts
3 Show Your Number
4 Restrict Calls
5 Minute Minder
6 Auto Answer
7 Call Waiting
8 Display Call Timer
9 Display Call Cost
10 Auto Redial
p. 92
p. 93
p. 96
p. 97
p. 99
p. 100
p. 26,
p. 100
p. 101
–
p. 101
p. 101
p. 102
p. 103
(Tab 3: Network Settings)
1 Network Settings
2 Off Line Mode
3 Internet Settings
p. 108
p. 108
p. 108
10 SIM Application* p. 91
11
Call Log
All Calls
Dialled Numbers
Missed Calls
Received Calls
Call Timers
Call Costs*
Data Counter
p. 111
p. 111
p. 111
p. 111
p. 111
p. 111
p. 112
12
Connectivity
Bluetooth
Infrared
Mass Storage
USB Charge
Card Settings
p. 113
p. 115
p. 115
p. 115
p. 116
* Depends on SIM card contents.
p. 103
p. 104
p. 105
p. 105
p. 107
p. 107
p. 107
p. 107
p. 107
p. 107
List of Menu Functions
Your Phone
Please check the following carefully. Your phone should come
complete with:
• EDGE/GSM 900/1800/1900 GPRS phone
• Rechargeable Li-ion Battery
• AC Charger
• Stereo Handsfree
• User Guide
• Supplementary Manual
• USB Data Cable
• Quick Start Guide
• CD-ROM
• Warranty Card
• Service Centre List
Optional Accessories
•
•
•
•
Li-ion Spare Battery (XN-1BT82)
USB Data Cable (XN-1DC31)
AC Charger (including USB Data Cable) (XN-1QC75)
Stereo Handsfree (XN-1ER90)
Note
• Use only the accessories supplied or accessories approved by
Sharp.
10
Your Phone
Getting Started
12
19
20
10
11
21
22
23
24
25
30
13
14
15
16
17
18
26
27
28
31
29
32
Getting Started
11
1. Light Sensor
2. Small Light:
Flashes when an incoming call or a new message is received or
missed, if Event Light (p. 92) or Status Light (p. 92) is enabled.
3. Display
4. Speaker
5. Navigation Keys (Arrow Keys): abcd
Moves cursor to highlight a menu item, etc.
Up arrow key (a) displays the Calendar when pressed in standby.
Down arrow key (b) displays the Phonebook entries when
pressed in standby.
Left arrow key (c) displays the Java™ Gallery list when pressed
in standby.
Left arrow key (c) switches Bluetooth on/off when long pressed
in standby.
Right arrow key (d) displays Gallery when pressed in standby.
Right arrow key (d) switches the infrared setting on/off when
long pressed in standby.
6. Centre Key: B
Displays Main menu in standby, and executes functions.
Long press in standby to initiate video camera.
7. Left Soft Key: A
Executes the function in the lower left of the screen.
Displays Message menu in standby.
8. Shortcut Key: E
Displays Shortcut menu.
12
Getting Started
9. Send/Redial Key: D
Makes voice calls or accepts calls, and displays the call logs in
standby.
10. Voicemail Key: G
Long press to connect to the Voicemail centre. (Depending on the
SIM card.)
11. * /Shift Key: P
Switches character input method as follows on the text entry
screen.
Abc, ABC, abc, 123, T9 PinYin, and T9 Stroke
Press to enter , P, ?, - or * in standby.
Long press in standby to lock the keypad.
12. Earpiece
13. Right Soft Key: C
Executes the function in the lower right of the screen.
Opens the browser in standby.
14. Multimedia Key: T
Displays Multimedia menu.
15. Clear/Back Key: U
Clears the characters before the cursor, returns to the previous
screen, etc.
16. End/Power Key: F
Ends a call and turns power on/off.
17. Keypad
18. #/Silent Key: R
Displays symbol screen on the text entry screen.
Long press to switch languages on the text entry screen.
Long press in standby to switch Profiles settings between the
mode most recently activated and Silent mode.
19. External Connector:
Used to connect either the AC charger or a USB data cable.
20. Microphone
21. Side Multimedia Key: Y*
When in standby with the phone either open or closed:
Displays Multimedia menu.
Long press to activate Keypad Lock.
22. Side Send Key: Z*
When in standby with the phone either open or closed:
Displays the call logs.
Long press to switch Profiles settings between the mode most
recently activated and Silent mode.
23. Side Volume Keys: VW*
Press during a call to increase or decrease the earpiece volume.
Press while listening to music (or video) to increase or decrease
the earpiece volume.
Press V in standby to view the Calendar.
Long press V in standby to turn on the Mobile Light.
Press W in standby to view Phonebook entries.
24. Side End Key: S*
When in standby with the phone either open or closed:
Press while listening to background music to stop playback.
Long press to activate Display Saving.
25. Camera Key: X*
When in standby with the phone either open or closed:
Displays Main menu.
Long press to activate the camera.
When the phone is closed and the camera is active:
Takes a picture or starts recording a video.
26. Camera
27. Mobile Light:
Used as an auxiliary light.
28. Battery Cover
29. Built-in Aerial:
Warning: Do not cover the bottom area of the phone with your
hand when in use as this may interfere with the performance of
the built-in aerial.
30. Infrared Port:
Sends and receives data via infrared.
31. microSD Card Slot
32. Handsfree Kit/Microphone Connector
When the phone is closed, this key can be used to navigate
functions when an application is being used. For details, see “Using
the Side Keys” on page 25.
Getting Started
13
Inserting/Removing the SIM Card and the
Battery
1. Slide off the battery cover (
).
3. Hold the battery so that the metal contacts of the battery are
facing down, slide the guides on the top of the battery into
the battery slots , and then insert it .
2. Slide the SIM card into the SIM holder
SIM card
14
Getting Started
4. Replace the battery cover.
Note
• Make sure that only 3V SIM cards are used.
• Make sure that the standard Sharp accessory battery is used.
Battery Disposal
The device is battery-powered. In order to protect the environment,
please read the following points concerning battery disposal:
• Take the used battery to your local waste depot, dealer or
customer service centre for recycling.
• Do not expose the used battery to a naked flame, immerse in
water or dispose with the household waste.
Battery Level Indicator
The current battery level is displayed in the upper right of the
screen.
Low Battery during Use
When the battery is running low, an alarm will sound and “ ” or
“ ” is displayed on the screen.
If you are using your phone and you hear the low battery alarm,
attach your charger as soon as possible. The phone may not be
able to continue normal operation if you continue to use it.
Battery Indicators
Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
16
Getting Started
Inserting/Removing the Memory Card
Note
• Make sure that the phone is turned off before inserting/removing
the memory card.
• Be sure to insert the card in the correct direction and orientation.
• Keep all memory cards out of the reach of small children.
• If you have difficulties opening the microSD card slot cover, try
again after removing the battery cover.
1. Turn off the phone.
2. Open the microSD card slot cover.
3. Insert the memory card until it clicks. (To remove the
memory card, push the memory card until it clicks.)
Connecting the Handsfree Kit
1. Open the connector cover.
2. Connect the handsfree kit.
4. Close the cover.
Tip
• You see the following indicators when the memory card is in use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable. Make sure
the card is properly inserted.
: Appears when the card is being accessed.
: Appears when the card is being formatted.
Getting Started
17
Turning Your Phone On and Off
To turn the power on or off, long press F for approximately 2
seconds.
To Enter the PIN Code
If the PIN (Personal Identification Number) code is enabled you are
asked to enter the PIN code each time the phone is switched on.
For details on setting the PIN code, see “Enabling/Disabling the PIN
Code” on page 101.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press B.
Note
• If your PIN code is entered incorrectly three times in a row, the
SIM card is locked. See “Enabling/Disabling the PIN Code” on
page 101.
• If the clock settings have not been entered, the date and time
entry screen is displayed (p. 99).
To Copy All Phonebook Entries from the SIM Card
“Call Manager” o “Advanced” o “Copy All Entries”
1. Select “From SIM to Handset”.
18
Getting Started
Slide Functions and Keypad Lock
When your phone is on, you can answer an incoming call by sliding
open your phone.
You can terminate the call and lock the keypad to prevent it from
being pressed accidentally by sliding close your phone.
Note
• Some applications can be used even when your phone is closed.
• Some Java™ applications are suspended when your phone is
closed.
• Do not stick items on the back of the LCD display when the slider
is open.
You can also operate the following actions by sliding open/close
your phone.
When opened:
• The display and keypad light up.
• The keypad is unlocked.
• Incoming calls can be answered.
See “Slider Settings” on page 102.
When closed:
• The keypad is locked.
• Calls are terminated.
See “Slider Settings” on page 102.
Getting Started
19
Display Indicators
1.
2.
/ :
3.
4.
/ :
/ :
5.
/ /
6.
7.
/ /
8.
/ /
Indicator area
Left soft key
20
Getting Started
Centre key
Right soft key
: Strength of received signal/Service out of range
: EDGE
: GPRS enabled
: Roaming outside network
Connection to the server [established/
communicating]
Voice call [incoming/in progress]
Alerts [text message and multimedia message/
Email]
/ :
Mailbox full [SIM card only/handset only/both SIM
card and handset/Email only]
“Voice Calls” diverts set to “Always”
/ / / / / :
Connection status
[USB data cable [standby or connected to a USB
device/exchanging information]/IrDA setting
[standby/exchanging information]/Bluetooth
wireless setting [standby/exchanging information/
talking with the Bluetooth headset/Hide my phone]]
: Java™ application [executed (colour)/suspended
(grey)]/Music Player
9.
10.
Secure WAP/Web page displayed
/ / : Silent/vibration setting [silent/vibration enabled/
silent and vibration enabled]
11. / :
Speaker mode [speaker phone on/microphone
muted]
12. :
Memory card inserted
13. / : Battery level
14. :
Daily alarm enabled
15. / :
Schedule entry enabled [with/without reminder
alarm]
16. :
Outbox contains unsent messages [text message/
multimedia/Email]
17. :
Voicemail message alert
18. :
“Show Secret Data” set to “On”
19. :
Function Lock enabled
20. :
Keypad Lock enabled
21. (No display)/ / / :
Current profile [Normal/Car/Silent/Original]
22. :
Hour minder enabled
23. :
Auto answer enabled
24. / / : Answer Phone [enabled/enabled with message
saved/disabled with message saved]
Getting Started
21
Navigating Functions
The basic operations for when the phone is open or closed are as
follows.
Main Menu
When the Phone is
Open
All applications are accessed from the Main menu.
To launch applications, you will need to open the Main menu,
highlight menu items, and then make selections. For details on
menu options, see “List of Menu Functions” on page 8.
The Main menu and some applications can also be operated using
the side keys (Y, Z, V, W, S, X) when the phone is closed.
22
Navigating Functions
When the Phone is
Closed
To Access the Main Menu Press B in standby.
Press X in standby.
To Select a Menu Item
(indicated in quotation
marks in this user guide)
Move the cursor using
a, b, c, d and
press B to select.
Move the cursor using
Y, Z, V, W and press
X to select.
To Return to the Previous
Screen
Press right soft key if it
Press S.
displays Back.
To Close the Main Menu
Press right soft key if it
Press S.
displays Back.
In certain procedures when the phone is open, you will need to
press one of the soft keys (indicated in square brackets in this user
guide), which are displayed in the lower left and right of the screen.
Press the corresponding soft key (A or C).
The Organiser and Settings menus have tabs.
The operations for selecting an item in these menus are as follows.
Operations in Open Position
Shortcut Keys
When the Phone is
Open
When the Phone is
Closed
To Access the Desired
Tab
Press c or d.
To Select a Menu Item
(indicated in quotation
marks in this user guide)
Move the cursor using Move the cursor using
a or b and press B Y, Z, V, W and press
to select.
X to select.
Press Y, Z, V or W.
Note
• The side keys you need to use will differ depending on the
position the phone is held. For details on side key operations, see
“Operations in Closed Position” on page 25.
Each section in this user guide starts with a list of items you will
need to select in order (indicated in italics) before performing the
procedures shown. Select each item to reveal the next set of items
that you have to choose from. Open subsection items after opening
those listed in the main section.
Example:
“Java™” o “Java™ Settings”
Example (menu with tabs):
“Settings” o “Phone Settings” tab o “Sound Settings”
You can access menus by pressing B and digit keys for the
corresponding number on the Main menu. For numbers 10 to 12,
press B and P (10), Q (11) or R (12). For menus with
tabs, press d (or c when necessary) to select the desired tab
before pressing the digit keys. See “List of Menu Functions” on
page 8.
Shortcuts are listed in the headings of this user guide.
Example (p. 108):To Access “Off Line Mode” Sub Menu
Off Line Mode (M 9-d-d-2)
“Settings” o “Network Settings” tab o “Off Line Mode”
Press BO and d twice for the “Network Settings” tab, then
press H.
Example (p. 43): To Access “Manage Groups” Sub Menu
Manage Groups (M 8-5)
“Call Manager” o “Manage Groups”
Press BNK.
Note
• The shortcut keys work for the first three menu levels only.
Navigating Functions
23
Shortcuts
Your phone has a shortcut function (press E in standby) which
enables you to access the desired menu quickly. The default
shortcuts are as follows (shortcuts assigned to Q-O can be
customised):
• Main menu
• Enter Phone Number
• G: Inbox
• H: Create Message
• I: Bookmarks
• J: Calendar
• K: Phonebook
• L: Gallery
• M: Calculator
• N: Alarms
• O: Bluetooth
• Q: Scan Card
24
Navigating Functions
To Use the Shortcut Key
1. Press E in standby.
2. Select the desired item or number.
To Customise the Assigned Shortcuts
1. Press E in standby.
2. Highlight the shortcut you wish to customise from
Q-O.
3. Press [Options] and select “Assign”.
The list of the available items is displayed.
4. Select the desired item.
Note
• To move the item in the list that appears in step 1, highlight the
item, press [Options] and select “Move”. Then press a or b to
the desired location and press B.
• To reset the customised shortcut, press [Options] and select “Set
to Default” in step 2.
Operations in Closed Position
Using the Side Keys
You can navigate functions when your phone is closed by using the side keys. Operations differ as follows depending on the direction the
phone is held.
Direction
Side Key
Multimedia Y
Send Z
Up V
Down W
End S
Camera X
Rotated 90q to the Right
(turn clockwise)
Normal Position
Moves cursor down.
Moves cursor to the left.
Long press to activate Keypad
Long press to activate Keypad Lock.
Lock.
Rotated 90q to the Left
(turn counter clockwise)
Upside Down
Moves cursor to the right.
Moves cursor up.
Long press to activate Keypad Lock. Long press to activate Keypad Lock.
Moves cursor up.
Moves cursor down.
Moves cursor to the left.
Moves cursor to the right.
Long press to switch to Silent mode. Long press to switch to Silent mode. Long press to switch to Silent mode. Long press to switch to Silent mode.
Moves cursor up.
Long press to scroll up.
Moves cursor to the right.
Moves cursor to the left.
Moves cursor down.
Long press to repeatedly move to Long press to repeatedly move to
Long press to scroll down.
the right.
the left.
Moves cursor down.
Long press to scroll down.
Moves cursor to the left.
Moves cursor to the right.
Moves cursor up.
Long press to repeatedly move to Long press to repeatedly move to
Long press to scroll up.
the left.
the right.
Returns to previous screen.
Long press to activate Display Saving.
Executes the function.
Long press in standby to activate the camera.
Navigating Functions
25
Motion Control
Your phone has a sensor which can detect motion or changes in
direction. You can change the picture being displayed or activate an
application when your phone is closed, just by moving it in a certain
way. (This is available in portrait and landscape position.)
For details on the settings for motion control, see “Motion Control
Settings” on page 100.
Quick Shortcut
Set your phone so an application is activated by shaking the phone
sideways a few times. (This is only available in standby.)
You can launch Music Player by shaking the phone sideways about
3 times in portrait position.
About 3×
Enlarge or Shrink the Contents of the Screen
Zoom in on or zoom out from a picture, or enlarge or shrink the
contents of a WAP/Web page by tilting the phone forward or
backward.
In landscape position, you can access the Picture folder by shaking
the phone sideways about 3 times.
About 3×
Select a Sound File or Picture
Select the previous or next sound file or picture by shaking the
phone once to the left or to the right.
26
Motion Control
The application set to Quick Shortcut can be changed.
To Set Quick Shortcut (M 9-7-2)
“Settings” o “Phone Settings” tab o “Motion Control” o
“Quick Shortcut”
1. Select “Switch On/Off”.
2. Select “On” or “Off”.
To Change the Assigned Quick Shortcut
“Settings” o “Phone Settings” tab o “Motion Control” o
“Quick Shortcut” o “Quick Shortcut Entry”
1. Select “Portrait” or “Landscape”.
2. Select the desired application and press [Assign].
Note
• To delete an assigned shortcut, highlight “Portrait” or
“Landscape” in step 1, press [Options] and then press [Delete].
• To reset the assigned shortcut, highlight “Portrait” or
“Landscape” in step 1, press [Options] and then press [Reset
Settings].
Tapping
Set your phone so the application currently being used can be
ended by tapping the back of the phone a few times (3 to 5 times).
(The phone returns to standby.)
Quick Silent
Quickly silence your phone (the ringtone, alarm tone, etc.) just by
turning the phone over.
Motion Control
27
Practicing the Action (M 9-7-4)
You can practice and confirm the actions set in the motion control
settings.
“Settings” o “Phone Settings” tab o “Motion Control” o
“Action Test”
1. Select “Portrait”, “Landscape”, “Zoom in/out”, “Select
Contents” or “Back Tap”.
2. Perform the selected action to test the setting.
Note
• A confirmation tone sounds when an action is recognized.
• Motion control does not function when Keypad Lock is set or the
display is turned off.
• Motion control may not function correctly depending on the way
the phone is held, shaken or tapped.
• When using motion control, make sure to hold on to the phone
firmly and not to shake the phone too strongly. Confirm that there
is enough space around you to ensure the safety of others.
Failing to do so may result in injury or damage to the phone or
objects near by.
• Tapping may not be recognised while playing back music with
Music Player.
28
Motion Control
Voice Call Functions
Making a Voice Call
1. Enter the area code and the phone number you wish to dial,
and then press D to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
Emergency Calls
1. Enter the official emergency number for your location using
the keypad and press D to dial.
Note
• It may not be possible to make emergency calls on all mobile
phone networks when certain network services and/or phone
features are in use. Contact your service provider for more
information.
• Emergency numbers differ depending on the location.
• Before making the emergency call, make sure the phone is
turned on, the signal is strong, and a SIM card is inserted
properly.
• During an emergency call, do not end the call until you are given
permission to do so.
• Connection in all conditions cannot be guaranteed for wireless
phones. You should never rely solely on any wireless device for
communication during an emergency.
International Calls
1. Long press Q until a  (international dialling prefix) sign
is displayed.
2. Enter the country code, followed by the area code (without
the leading zero) and the phone number, and press D to
dial.
Adding an Entered Phone Number to the Phonebook
1. After entering a phone number, press [Options] and select
“Save Number”.
For details on creating a new entry, see “Adding a New Entry”
on page 39.
Showing or Hiding My Phone Number on the Display of the
Called Party
1. After entering a phone number, press [Options], select
“Show My ID” or “Hide My ID” and press D to dial.
Voice Call Functions
29
Speed Dialling
Answering a Voice Call
The digit keys (G to O) can be used for speed dial. Up to 8
phone numbers from the Phonebook memory (Handset and SIM)
can be assigned to H to O. The phone number of the
Voicemail centre is assigned to G.
For details on setting the speed dial list, see “Speed Dial List” on
page 44.
1. To dial a number using the speed dial, long press any of the
digit keys (G to O).
The phone number saved in the speed dial list is dialled.
When an incoming call is detected, the phone rings.
1. Press D or B to answer the call.
Or press any key except F, U, S, [Options] or [Busy]
when the “Any Key Answer” function is enabled. Set the Any
Key Answer function in the profile of each mode (p. 93).
You can answer an incoming call by sliding open your phone if
“Calls on Open” is set to “On” in Slider Settings (p. 102).
Redialling
You can redial numbers in the call log. Select from specific
categories or “All Calls”. Specific categories contain up to 30
numbers and the “All Calls” list contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial a voice call.
30
Voice Call Functions
Rejecting an Incoming Call
1. Press [Options] and select “Reject” while the phone is
ringing to reject a call you do not wish to answer.
In Call Menu (Voice Call)
Adjusting the Earpiece Volume
You can adjust the earpiece volume to five levels.
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call or
press W (or b/c) to decrease the volume.
3. Press B when the volume is set to the desired level.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it is on.
1. During a call, press B.
Putting a Call on Hold
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call to,
then press D.
Tip
• You can also make another call by entering the phone number
during a call instead of step 1. The current call is automatically
put on hold.
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Messages”.
The following options are available: “Create Message” to make
an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to access
these folders. For details on SMS and MMS, see “SMS” and
“MMS” on page 55.
Call Waiting
1. During a call, press [Options] and select “Hold & Answer” to
answer the second call.
The first call is put on hold and you can now talk to the second
caller.
You can also answer the second call by pressing D.
Note
• You need to set “Call Waiting” to “On” if you wish to use the Call
Waiting service (p. 107).
• Call Waiting service may not be available on all networks.
Contact your service provider for more information.
• If you do not wish to answer the second call, press [Options] and
select “Busy” in step 1. If “Reject” is selected, the log of the
second call is saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Conference All” to
join the conference call.
2. Press F to end the conference call.
Voice Call Functions
31
Note
• The conference call service may not be available on all networks.
Contact your service provider for more information.
• To end the call with all participants, press [Options] and select
“End All Call(s)”.
• You have more options for the Conference call after selecting
“Conference All” in step 1:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on hold, select
“Private”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference call
and press D to dial.
3. Press [Options] and select “Conference All” to join the
conference call.
If you wish to add other participants, repeat steps 1 to 3.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you wish
to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
32
Voice Call Functions
To Have a Private Conversation with One of the Participants
1. During a conference call, select the person that you wish to
talk to.
2. Press [Options] and select “Private”.
3. Once you have finished the private conversation, press
[Options] and select “Conference All” to return to the
conference call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
Entering Characters
Changing the Input Language
In multi-tap input method, press each key until the desired
character is displayed. For example, press H once for the letter
A or twice for the letter B.
1. On the text entry screen, press [Options] and select “Input
Language”.
2. Select the desired language.
Press the following keys to:
G: Enter:
. (full-stop) , (comma) ? ! : ; ' (apostrophe) " / 1
Q: Enter:
(space)+ = < > € £ $ ¥ % & 0
P: Switch character case among four modes:
Abc, ABC, abc and 123.
R: Display the pictograms and symbols input screen.
Long press the following keys to:
G-O:
Q:
P:
R:
Enter 1-9 numbers.
Enter space in Numeric mode or to enter 0 in other
modes.
Shift between multi-tap and T9 mode.
Display the language options screen.
Changing the Input Method
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the input method you wish to use.
Input Method
Input Language
= Simplified Chinese
Input Language
= English
T9 Mode
T9 PinYin
T9 Stroke
T9 Abc
T9 ABC
T9 abc
Multi-tap mode
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Tip
• In T9 or multi-tap mode, you can switch input mode as follows
by pressing P.
Entering Characters
33
English/T9 mode
English/Multi-tap mode
6. If you wish to clear the word, highlight it and long press U.
7. Press B to complete the selection.
Tip
• If you press Q instead of step 6, a space is inserted next to
the selected word.
T9 PinYin and T9 Stroke Mode
In T9 PinYin and T9 Stroke mode, keys are as follows.
Key
Stroke
PinYin
Simplified Chinese/T9 mode
T9 English Mode
Using T9 English Mode
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you wish to
change. “
” is displayed on the screen.
4. Press the keys to enter characters.
5. Press a or b to select the word you wish to input.
34
Entering Characters
abc
def
ghi
jkl
Wildcard
mno
pqrs
tuv
wxyz
Change Input Method
Space
Go to the pictograms and symbols input screen.
G-O:
P:
Long press to input corresponding Chinese
character displayed in the candidate field.
Long press to enter tones “
mode.
” in T9 PinYin
R:
Long press to display the Input Language screen.
Changing the Input Method between Stroke and PinYin
See “Changing the Input Method” on page 33.
Using Stroke Mode
The following is an example of entering “ ”.
1. Change the input mode to T9 Stroke mode.
2. Press I G J to display the
corresponding stroke for “ ”.
3. Long press the corresponding key to
complete the selection (in this case
M).
Using PinYin Mode
Input field
Long press the corresponding
numeric key to select the desired
character directly from the
candidate field.
Candidate field
The following is an example of entering “
1. Press K for the first letter of the
reading, then highlight “l”.
”.
2. Press J for the vowel of the first
letter, then highlight “li”.
Characters with the same reading are
displayed in the candidate field.
3. Long press corresponding numeric key to enter the desired
character (in this case, H).
Entering Characters
35
Tip
• When the cursor is placed after the first character, the candidate
field displays characters most likely to follow.
• If you want to use tone options, long press
P instead of step 3 to display the desired
character.
The tone symbols are displayed in the
candidate field.
Press the corresponding numeric key
(H).
Selecting the Character to Input
1. Perform steps 1 and 2 in “Using Stroke Mode” or “Using
PinYin Mode” on page 35.
2. Press b to highlight the Chinese
character.
3. Press c or d to select the character you wish to input and
press B.
You can also enter the desired Chinese character by pressing
the candidate number directly using the keypad.
User Dictionary
You can create your own word list for alphabet text and T9 Chinese input.
English User Dictionary
Note
• This function is only available when “Input Language” is set to
“English”.
To Create a New Entry
1. On the text entry screen, press [Options] and select “User
Dictionary”.
2. Select “Add New Word”.
3. Enter a new word.
36
Entering Characters
To Edit a Word in the List
1. On the text entry screen, press [Options] and select “User
Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
To Create a New Entry
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Select “Add New Word”.
3. Enter a new word.
4. Enter an acronym.
To Delete a Word
1. On the text entry screen, press [Options] and select “User
Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Delete”.
4. Select “Yes” or “No”.
To Edit a Word in the List
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the entry word.
5. Modify the acronym.
Chinese User Dictionary
You can enter Chinese characters, alphabet, symbols and numbers
for Chinese word lists.
Note
• This function is only available when “Input Language” is set to
“Simplified Chinese”.
• Only capital letters can be used for acronyms.
To Delete a Word
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Delete”.
4. Select “Yes” or “No”.
Entering Characters
37
Entering Pictograms and Symbols
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select “Add
Symbol”.
The history for the pictograms screen is displayed first.
Press A to see all pictograms.
Press C to switch to the symbols screen.
2. Select the pictogram or symbol you wish to use and press
B.
Note
• Pictograms are only available for SMS/MMS messages and Text
Template. However, pictograms can be used in an application
other than SMS, MMS or Text Template in the following cases:
• When the pictogram is saved in a text template and that text
is inserted using “Insert Template”.
• When pasting text using “Copy” and “Paste”.
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to be cut,
then press B.
4. Move the cursor to the last letter to highlight the area, then
press B.
5. Move the cursor to the point you wish to paste the letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
8. Select the desired item.
Using Templates
For details on creating the text template, see “Adding Phrases to
Text Templates” on page 87.
1. On the text entry screen, move the cursor to the point you
wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
38
Entering Characters
Insert Phonebook Entries
For details on creating the Phonebook entries, see “Call Manager”
on page 39.
1. On the text entry screen, move the cursor to the point you
wish to insert the Phonebook Entry.
2. Press [Options] and select “Advanced”.
3. Select “Insert Phonebook Entry”.
4. Select the desired Phonebook Entry.
The selected entry is inserted.
Call Manager (M 8)
Searching for an Entry
Your phone can store up to 1000 entries. For each entry, you can
enter information including up to 5 phone numbers and 5 Email
addresses. There is a limit to the number of characters that can be
entered for each item. The character limit differs for the handset
memory and SIM card memory.
Changing the List Displayed (M 8-9-2)
“Call Manager” o “Phonebook Settings” o “Source”
1. Select from “Handset”, “SIM” or “Both”.
Adding a New Entry
Selecting the Storage Memory (M 8-9-3)
“Call Manager” o “Phonebook Settings” o “Save to”
1. Select from “Handset”, “SIM” or “Choice”.
Registering a New Entry (M 8-2)
“Call Manager” o “Add New”
1. Select the field you wish to fill in, and enter the relevant
information.
2. Press [Save] when finished.
Saving an Unregistered Number (M 8-9-5)
“Call Manager” o “Phonebook Settings” o “Save
Unregistered”
1. Select “Incoming Call” or “Outgoing Call”.
2. Select “On” or “Off”.
Finding a Name
“Call Manager” o “Phonebook”
1. Enter the first few letters of the name.
The first name corresponding to the entered letters is
highlighted.
Sorting the Phonebook List Order (M 8-9-1)
“Call Manager” o “Phonebook Settings” o “View
Phonebook”
1. Select “By PinYin” or “By Group”.
Selecting the Search Mode (M 8-9-4)
“Call Manager” o “Phonebook Settings” o “Search
Mode”
1. Select “Character Search”, “PinYin Search” or “English
Search”.
Registering My Card (M 8-6)
“Call Manager” o “My Card”
Call Manager
39
Dialling from the Phonebook
“Call Manager” o “Phonebook”
1. Highlight the desired entry and press D to make a voice
call.
Dialling a Service Phone Number (M 8-10)
Certain SIM cards contain service phone numbers that can be
dialled. Contact your SIM card vendor for more information.
“Call Manager” o “Service Dialling No.”
1. Select the desired service phone number.
Sending a Message from the Phonebook
“Call Manager” o “Phonebook”
1. Select the desired entry including the phone number or
Email address you wish to use.
2. Select the desired phone number or Email address.
3. When a phone number is selected in step 2, select “Create
Message”.
For further procedures, see “Creating a New Message” on
page 55.
40
Call Manager
Using Mailing Lists (M 8-8)
Up to 20 groups can be registered.
To Create a New Mailing List
“Call Manager” o “Message Groups” o “Add New Group”
1. Enter the group name.
The new group name is displayed following the last group on
the Group List screen.
To Add Recipients to a Group
Up to 20 recipients can be registered in each list.
“Call Manager” o “Message Groups”
1. Select the desired group name.
2. Select “Assign New Entry”.
3. Select the desired entry.
The detailed screen is displayed.
4. Select the desired phone number or Email address.
To Send a Message Using a Mailing List
“Call Manager” o “Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
For further procedures, see “Creating a New Message” on
page 55.
Editing Phonebook Entries
“Call Manager” o “Phonebook”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Adding a Thumbnail to Entries
Only Phonebook entries saved to the handset can have thumbnails
attached to them.
“Call Manager” o “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Picture”.
4. Select “Assign Picture”.
5. Select the desired picture.
6. Press [Save] when finished.
Note
• If you delete a picture in the handset memory, the corresponding
thumbnail is also deleted.
• To store a picture right after it was taken, select “Take Picture”
in step 4.
Assigning a Ringtone or a Ring Video Clip to Each Entry
“Call Manager” o “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Tone/Video for Voice Call” or “Tone/Video for New
Message”.
4. Select “Assign Tone”.
5. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or
“Flash®”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” or “Assigning a
Ring Video Clip for an Incoming Call” on page 97.
7. Press [Save] when finished.
Deleting Phonebook Entries
Deleting All Phonebook Entries
“Call Manager” o “Advanced” o “Delete All Entries”
1. Select from “Handset Entries”, “SIM Entries” or “Both
Entries”.
2. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
Call Manager
41
Deleting a Phonebook Entry
“Call Manager” o “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Managing the Phonebook
Copying Phonebook Entries between SIM Card and Handset
“Call Manager” o “Advanced” o “Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to SIM”.
Note
• When you insert the SIM card into your phone for the first time
and start the Phonebook application, the confirmation screen is
displayed automatically, asking you if you wish to copy or not.
The number of Phonebook entries to be copied varies depending
on the SIM capacity.
• If the memory space is not enough to save all entries, you cannot
complete copying.
Sending a Phonebook Entry
“Call Manager” o “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Send Phonebook”.
42
Call Manager
3. Select “As Message”, “As Email”, “Via Bluetooth” or “Via
Infrared”.
For “As Message”
For details, see “MMS” on page 55.
For “As Email”
For details, see “Email” on page 55.
For “Via Bluetooth”
For details, see “Bluetooth” on page 113.
For “Via Infrared”
For details, see “Infrared” on page 115.
Receiving a Phonebook Entry
When the phone receives a Phonebook entry, a confirmation
message is displayed in standby.
1. Select “Yes”.
The received entry is saved in the Phonebook. Select “No” to
reject.
Play Messages (M 8-3)
Manage Groups (M 8-5)
You can play back the messages saved with Answer Phone.
“Call Manager” o “Play Messages”
Playback automatically ends when all messages have been played.
To stop playback, press U.
Press V (or a) to increase the volume or press W (or b) to
decrease the volume.
To play back previous message, press c.
To play back the next message, press B or d.
To delete the message being played back, press [Delete]
during playback.
Different ringtones can be set for each category.
“Call Manager” o “Manage Groups”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call” or “For New Message”.
4. Select “Assign Tone”.
5. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or
“Flash®”.
6. Select the desired tone or video clip.
Note
• Up to 20 messages (a total of approximately 90 seconds) can be
recorded. Answer Phone cannot be used when the remaining
available recording time is less than 12 seconds, or when 20
messages are already saved. In such cases, delete unnecessary
messages.
Editing the Category Name
“Call Manager” o “Manage Groups”
1. Highlight the desired category name.
2. Press [Edit] and select “Edit Name”.
3. Modify the name.
Tip
• Press U in standby to play back the message saved with
Answer Phone.
Call Manager
43
Speed Dial List (M 8-7)
Memory Status
Setting Phonebook Entries in the Speed Dial List
This function helps you to check the memory used in the
Phonebook.
“Call Manager” o “Advanced” o “Memory Status”
To Create a New Entry for Speed Dial or Speed Mail
“Call Manager” o “Speed Dial List”
1. Select an empty entry.
2. Press [Assign].
3. Select the desired Phonebook entry.
4. Select the desired phone number.
5. Press B.
You can now also assign an Email address for Speed Mail.
6. Select the desired Email address.
7. Press B.
8. Press [Save] to save the details to the selected digit key.
To Change the Speed Dial List or the Speed Mail List
“Call Manager” o “Speed Dial List”
1. Select the entry you wish to change.
2. Press [Options] and select “Change”.
3. Select the “Call number” or “Mail address” you wish to
modify.
4. Press [Change].
5. Select the phone number or Email address to assign.
If you wish to remove the entry, select “Do not Assign”.
6. Press [Save].
44
Call Manager
Multimedia (M 7)
Music Player (M 7-1)
Music player supports MP3, MPEG-4 and 3GPP format sound files.
Playing Back Sound Files
“Multimedia” o “Music Player” o “My Music”
1. Select the item you wish to play back.
• “All Music”: All sound files are displayed.
• “Artists”: The names of all artists are displayed.
• “Albums”: The names of all albums are displayed.
• “Playlists”: All playlists are displayed.
2. Select the desired sound file.
To pause playback, press B.
To stop playback, press F and go back to standby, then
press F again. Select “Yes” when the pop-up appears.
Note
• Select “My Music” to update the list of available music tracks.
• You are asked whether or not to play sounds when the Silent
mode is activated.
• When the motion control setting for “Music” is set to “On”
(p. 100), you can change the sound file being played back by
shaking the phone sideways. This is only available when the
phone is closed.
• When you receive a call, playback of the current file is paused,
and you can receive the call. After the call ends, playback
resumes automatically.
To Play Back the Last File (M 7-1-1)
“Multimedia” o “Music Player”
1. Select “Last Played Music”.
“Currently Playing” is displayed when a file is being played
back.
Searching a File to be Played Back
“Multimedia” o “Music Player” o “My Music”
1. Select “All Music” or the desired album or playlist.
2. Press [Options] and select “Search”.
3. Enter a few letters of the title.
Search results are displayed with the first matching title
highlighted (non-matching titles are greyed out). Press a or
b to select other matching titles. The search will match the
entered text with any part of the title.
Sorting Files
“Multimedia” o “Music Player” o “My Music” o “All
Music”
1. Press [Options] and select “Sort”.
2. Select “By Title”, “By Artist”, “By Album” or “By Genre”.
Sort results are displayed.
Multimedia
45
Adding a File to the Playlist
“Multimedia” o “Music Player” o “My Music” o “All
Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a playlist, see
“Adding a New Playlist”.
3. Select the desired playlist.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file in the playlist
and press [Options]. Then select “Delete from Playlist”.
Note
• You can store up to 99 files in one playlist. However, the total
number of files stored on your phone cannot exceed 350 files.
Adding a New Playlist
“Multimedia” o “Music Player” o “My Music”o
“Playlists”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
Note
• To delete the playlist, highlight the playlist and press [Options].
Then select “Delete Playlist”.
• You can create up to 99 playlists.
46
Multimedia
Video Player (M 7-2)
Video Player supports MPEG-4, 3GPP and H.264 format video files.
Playing Back Video Clip Files (M 7-2-2)
“Multimedia” o “Video Player” o “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the desired file.
To pause playback, press B.
To stop playback, press U.
To Play Back or Resume Playback of the Last File (M 7-2-1)
“Multimedia” o “Video Player” o “Last Played Video”
Searching a File to Be Played Back
“Multimedia” o “Video Player” o “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Press [Options] and select “Search”.
4. Enter a few letters of the title.
Search results are displayed with the first matching title
highlighted (non-matching titles are greyed out). Press a or
b to select other matching titles. The search will match the
entered text with any part of the title.
Adding a File to the Playlist
“Multimedia” o “Video Player” o “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos”.
3. Highlight the file you wish to add to the playlist.
4. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a playlist,
see “Adding a New Playlist”.
5. Select the desired playlist.
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the file in the playlist
and press [Options]. Then select “Delete from Playlist”.
Adding a New Playlist
“Multimedia” o “Video Player” o “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Press [Options] and select “Add New Playlist”.
3. Enter the desired playlist name.
4. Press B.
Settings
“Multimedia” o “Video Player” o “Settings”
1. Select from “Playback Pattern”, “Backlight”, “Display Size”
or “Sound Effects”.
2. Select from the following:
• “Playback Pattern” (“Normal”, “Repeat”, “Repeat All”,
“Random”)
• “Backlight” (“Always On”, “Always Off”, “Normal Settings”)
When “Normal Settings” is selected, the backlight works
with the main backlight setting (p. 95).
• “Display Size” (“Normal Size”, “Enlarge”, “Full screen”,
“Widescreen”)
• “Sound Effects” (Various sound effects are available,
including “Normal”, “Bass” and “Surround”.)
Note
• To delete the playlist, highlight the playlist and press [Options].
Then select “Delete Playlist”.
Multimedia
47
Streaming Player (M 7-3)
You can play back video clip files while downloading them from the
mobile network.
You can also register the address of the Web site as a bookmark.
“Multimedia” o “Streaming Player”
1. Select “Last Played”, “Enter URL”, “Favourites”, “Access
Log” or “Settings”.
“Last Played”:
Shows the last streaming file.
“Enter URL”:
Enter the desired address of the Web site.
The browser opens, starts downloading
and plays back.
“Favourites”:
The address of the Web site is registered.
“Access Log”:
Shows a log of the Web sites you have
accessed.
“Settings”:
The Backlight, Display Size and Sound
Effect settings can be changed.
48
Multimedia
Camera (M 5)
Taking Pictures
“Camera”
1. Press B to take the picture.
The shutter sounds and the still image of the taken picture is
displayed.
2. Press B to save the picture.
The taken picture is saved in Gallery.
To cancel, press U.
To send the taken picture, press C in step 2.
Note
• When the video camera is launched, press C.
• When you try to send a picture that has too large a file size, the
picture size is resized for the message. The original sized picture
is saved in Gallery.
Recording Video Clips
“Camera”
The preview is displayed on the screen.
When in photo camera mode, press C to switch to video camera
mode.
1. Press B.
2. To stop recording, press B.
3. Select “Save”.
The video clip is saved in Gallery.
To view the preview before saving, select “Preview”.
To send the video clip, select “Send” and then select “As
Message”, “Bluetooth” or “Infrared”.
For “As Message”
For details, see “MMS” on page 55.
For “Bluetooth”
For details, see “Bluetooth” on page 113.
For “Infrared”
For details, see “Infrared” on page 115.
For further procedures, see “Creating a New Message” on page 55.
Note
• You can only send video clips when “For Message” is selected
for the recording time. For details, see “Selecting the Recording
Time and Picture Size” on page 54.
Common Functions in the Photo and
Video Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. Press a or b.
Once the phone has returned to standby, the zoom settings
return to default.
Camera
49
Note
• In photo camera mode, the zoom function is not available for
picture sizes 900 u 1600 and 1200 u 1600.
Adjusting the Exposure
“Camera” o [Options] o “Shooting Settings” o
“Exposure”
“Camera” o [Options] o “Record Settings” o “Exposure”
1. Press d (Bright) or c (Dark).
: (Dark o Normal o Bright)
Once the phone has returned to standby, the brightness
settings return to default.
Switching the Focus Mode
“Camera” o [Options] o “Shooting Settings” o “Focus”
“Camera” o [Options] o “Record Settings” o “Focus”
1. Select the desired option.
: Auto Focus
: Manual Focus
: Macro
50
Camera
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera” o[Options] o “Picture Quality”
“Camera” o[Options] o “Video Quality”
1. Select the desired picture or video quality.
: Super Fine
: Fine
: Normal
Note
• The better quality you select, the larger the file size becomes.
Using the Self-Timer
“Camera” o [Options] o “Self-timer”
1. Select “2sec”, “5sec” or “10sec”.
When you select one of these options, the corresponding
indicator (“ ”, “ ”, or “ ”) is displayed on the screen.
Select “Off” to cancel the self-timer.
Selecting the Storage Memory
“Camera” o [Options] o “Settings” o “Save New
Pictures”
“Camera” o [Options] o “Settings” o “Save New Videos”
1. Select the desired location from “To Handset Memory”, “To
Memory Card” or “Choice”.
Note
• If you select “Choice”, select the desired location every time you
save.
Auto Save
“Camera” o [Options] o “Settings” o “Auto Save”
1. Select “On” or “Off”.
Using the Help Function
“Camera” o [Options] o “Help”
Mobile Light
“Camera” o [Options] o “Mobile Light”
1. Select the desired mode.
“On” ( ): The light is always on.
“Auto” ( ): The light turns on if the phone detects that the
conditions are dark.
“Low Light” ( ) (photo camera mode only):
Select this mode for macro shooting.
“Off”:
The light is always off.
The corresponding indicator is displayed on the screen. Select
“Off” to turn it off.
Switching between the Photo and Video Camera Modes
You can switch between the photo and video camera modes by
pressing C.
Common Shortcut Keys
Photo Camera
Video Camera
Focus Lock
Focus
Switches Viewfinder
Switches the display modes
between with and without
in the Preview screen
indicators
Scan Barcode
Save New Pictures
Save New Videos
Picture Size
Scene
Microphone
Picture Quality
Video Quality
Self-timer
Zoom Max/Min
Help
Mobile Light
Note
• The “Switches the display modes” option is available in
“Preview” before you save a video clip. See “Recording Video
Clips” on page 49.
Camera
51
Functions in Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures are saved in
the JPEG format.
“Camera” o [Options] o “Picture Size”
1. Select the desired size.
1200 u 1600/900 u 1600/960 u 1280/
480 u 640/240 u 400/240 u 320/120 u 160
Continuous Shoot
“Camera” o[Options] o “Modes” o “Continuous Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”:
The continuous shoots are cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures continuously.
After selecting this mode, select from
“Fast”, “Normal”, “Slow” or “Manual”.
“Overlapped” ( ): Overlaps continuous pictures into one
picture and makes an afterimage.
After selecting this mode, select “Fast” or
“Normal”.
52
Camera
Note
• When you select “Manual” to take continuous pictures, press B
manually at the desired speed.
• You cannot use the Continuous Shoot function for picture sizes
larger than 480 u 640 pixels. “9 Pictures” and “Overlapped” are
not available for picture sizes larger than 240 u 400 pixels.
Taking Panorama Pictures
“Camera” o[Options] o “Modes” o “Panorama”
1. Select “On” and press B.
2. Move the phone slowly to keep the + mark aligned with the
assisting lines, and press B.
3. Select “Save”.
Note
• The image is captured automatically if the bar in the lower right
turns blue before B is pressed in step 2.
To Set the Assisting Lines
“Camera” o[Options] o “Settings” o “Panorama
Settings” o “Assisting Lines”
1. Select “On” or “Off”.
Note
• An error message is displayed if you move the phone fast when
taking panorama pictures with this setting on.
To Set the AE-Lock
When this setting is enabled, the exposure setting is fixed for the
same brightness level.
“Camera” o[Options] o “Settings” o “Panorama
Settings” o “AE-Lock”
1. Select “Enable” or “Disable”.
Barcode/Scan
You can read QR codes and the text on business cards. For details
on reading barcodes, see page 89. For details on scanning
business cards, see pages 89 and 90.
To Read Barcodes
“Camera” o[Options] o “Barcode/Scan” o “Scan
Barcode”
1. Display the barcode.
2. Press [Scan].
The scanned result is displayed.
To Scan Business Cards
“Camera” o[Options] o “Barcode/Scan” o “Scan Card”
1. Display the business card.
2. Press [Read].
3. Press [Scan] or B.
The scanned result is displayed.
Camera Effects
“Camera” o[Options] o “Modes” o “Camera Effects”
1. Select from “Sepia”, “Monochrome”, “Negative” or
“Sketch”.
Selecting a Frame
“Camera” o[Options] o “Modes” o “Add Frame”
1. Select “Preset Frames” or “Picture Gallery”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press B.
Note
• Images larger than 240 pixels [W] u 400 pixels [H] cannot be
used.
Selecting the Scene
“Camera” o[Options] o “Scene”
1. Select from “Auto”, “Night”, “Sports” or “Text”.
Using the Full Screen
“Camera” o[Options] o “Settings” o “Display
Indicators” o “Full Viewfinder”
Note
• To return to the normal viewfinder, select “Normal Viewfinder”.
Camera
53
Selecting the Shutter Sound
“Camera” o[Options] o “Settings” o “Shutter Sound”
1. Select the desired shutter sound from 3 preset patterns.
To play back the shutter sound, press [Play] in step 1.
Note
• Continuous Shoot uses the specialised shutter sound that cannot
be changed using the above settings.
• The shutter sound remains active even when “General Volume”
(p. 97) is set to “Silent” to prevent unauthorised use.
Functions in Video Camera Mode
Selecting the Display Size
“Camera” o [Options] o “Display Size”
1. Select “Standard” or “Expand”.
Selecting the Recording Time and Picture Size
“Camera” o [Options] o “Record Time/Size”
1. Select “For Message”, “Extended Video” or “SD VIDEO”.
For Message ( ):
Limits the size to send a message
depending on service providers.
Extended Video ( ): Less than 30 minutes (depending on
the memory).
SD VIDEO ( ):
Records in SD VIDEO format.
54
Camera
2. Select the desired picture size.
If “For Message” is selected, select “QCIF(176u144)” or
“SubQCIF(128u96)”.
If “Extended Video” is selected, select “QVGA(320u240)”,
“HQVGA(240u176)”, “QCIF(176u144)” or “SubQCIF(128u96)”.
If “SD VIDEO” is selected, select “QVGA(320u240)”.
Note
• If you select “For Message” for the recording time, the file size is
limited depending on the service provider. Therefore, the quality
is also limited for the setting.
• “Send” is not displayed after recording in the Extended Video mode.
Recording Video Clips with Sound
To record a video clip with sound, the microphone needs to be
activated.
“Camera” o [Options] o “Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default setting. Select
“Off” to record a video clip without the sound.
• The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
“Camera” o [Options] o “Settings” o “Video Encode”
1. Select the appropriate format.
Messages (M 4)
SMS
SMS allows you to send text messages up to 765 characters long.
If you send a message of more than 160 characters, it is split into
several segments.
MMS
With MMS, you can send images, sound or video to brighten
someone’s day. Messages of up to 50 KB with images, sound, or
video clips can be sent and received.
Email
Email allows you to send messages of up to 300 KB.
Note
• Some MMS functions may not always be available depending on
your network. Contact your service provider for more information.
• Maximum message size varies depending on the restrictions set
by the service provider.
Creating a New Message
(SMS/MMS)
“Messages” o “Message” o “Create Message”
(Email)
“Messages” o “Email” o “Create Email”
1. Select the recipient field.
2. Select the desired method to enter the recipient’s details.
3. For MMS, enter or select the Email address or phone
number from the Phonebook. For SMS, enter or select a
phone number. For Email, enter or select an Email address.
• To add multiple Email addresses or phone numbers,
highlight the recipient field, press [Options], and select “Edit
Recipients” and then select “Add Recipient”. Enter or select
the Email address or phone number from the existing
Phonebook.
• To change the recipient types, press [Options], select “Edit
Recipients” and highlight the desired recipient. Press
[Options] and select “Change to To”, “Change to Cc” or
“Change to Bcc”.
• To add a subject, highlight the subject field and press B.
Then enter the subject in the subject entry screen and press
B.
4. Place the cursor in the message field.
5. Press B to display the message entry screen.
Enter the message and press B.
Messages
55
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
After the message is sent, the message is moved to the Sent
box.
Note
• When you create an SMS message, the mode is automatically
switched to MMS in the following cases:
• When an Email address is entered in the recipient field.
• When a subject is entered.
• When the size of entered text has exceeded the SMS size limit.
To Add a Slide Show
1. Perform steps 1 to 5 in “Creating a New Message” on
page 55.
2. Press [Options] and select “Add Slide”.
3. Select “Add Slide After” or “Add Slide Before”.
4. Enter another message.
If you wish to set the duration of each slide, highlight your
message or other inserted item such as a picture or sound file.
Press [Options] and select “Slide Duration”, then select the
desired duration. Repeat steps 2 to 4 to add more slides.
56
Messages
To Attach Data
1. In step 6 in “Creating a New Message” on page 55, press
[Options] and select “Insert Item”.
2. Select “Picture”, “Sound”, “Video”, “Attach Contact”,
“Attach Appointment”, “Others” or “Flash®”.
When selecting “Attach Contact” or “Attach Appointment”, go
to step 4.
3. Select the desired option and then select the desired file.
If you wish to attach pictures, sounds or video clips that are
saved, select “Saved Pictures”, “Saved Sound” or “Saved
Video”.
If you wish to take new pictures, record sounds or video clips,
select “Take Picture”, “Record Voice” or “Record Video”.
4. Select the desired data.
If you wish to select your own Phonebook entry, select “My
Card”.
When attaching an appointment, select the desired day
including a schedule entry you wish to add and select the
desired schedule entry.
Note
• When attaching JPEG files, select the appropriate resize option,
as the maximum message size for sending varies depending on
the service provider.
To Remove Attachments
1. In step 6 in “Creating a New Message” on page 55, highlight
the desired item, press [Options] and then select “Remove
Item”.
Using the Sending Options
1. Press [Options] and select “Messaging Settings”.
• “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or
disables Delivery Report when the message is successfully
sent to the recipient.
• “Expiry Time” (“Maximum”, “1 hour”, “12 hours”, “1 day”,
“1 week”) (SMS/MMS): Sets Expiry Time for a message to be
saved in the server.
• “Priority” (“High”, “Normal”, “Low”): Prioritises composed
messages.
• “Read Report” (“On”, “Off”) (MMS): Confirms whether or not
a report is sent notifying the sender that the message has
been read.
2. Press [Options] and select “Send”.
After the message is sent, the message is moved to the Sent box.
Note
• The current message size displayed while you are creating the
message is an approximation.
• If a message cannot be sent for some reason, the message stays
in the Outbox and the “ ” is displayed in standby.
• To send the message in the Outbox, highlight the message,
press [Options] and select “Resend”.
Sending a Message in the Drafts Box
(SMS/MMS)
“Messages” o “Message” o “Drafts”
(Email)
“Messages” o “Email” o “Drafts”
1. Highlight the desired message.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Reading a Message
Messages you receive are saved in the Inbox.
(SMS/MMS)
“Messages” o “Message” o “Inbox”
(Email)
“Messages” o “Email” o “Inbox”
1. Select a folder.
2. Select the message you wish to view.
Note
• When the motion control setting for “Messaging” is set to “On”
(p. 100), you can change the size of the text by tilting the phone
forward or backward. This is only available when the phone is
closed.
Messages
57
Storing the Phone Number of a Sender in the Phonebook
(SMS/MMS)
“Messages” o “Message” o “Inbox”
(Email)
“Messages” o “Email” o “Inbox”
1. Select a folder.
2. Highlight the message from which you wish to store the
phone number or Email address.
3. Press [Options] and select “Save Address”.
The new Phonebook entry screen including the phone number
is displayed. For details on creating a new Phonebook entry,
see “Adding a New Entry” on page 39.
Calling the Phone Number of a Sender Embedded in the
Message
(SMS/MMS)
“Messages” o “Message” o “Inbox”
1. Select a folder.
2. Highlight the message containing the phone number you
wish to dial.
3. Press [Options] and select “Call Sender”.
58
Messages
Downloading a Single MMS
“Messages” o “Message” o “Inbox”
1. Highlight the message alert ( ) you wish to download.
2. Press [Options] and select “Download”.
Replying to a Message
(SMS/MMS)
“Messages” o “Message” o “Inbox”
(Email)
“Messages” o “Email” o “Inbox”
1. Select a folder.
2. Highlight the message you wish to reply to.
3. Press [Options] and select “Reply” (to sender only).
4. Select “Reply” or “Reply with History”.
5. Enter the message.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Forwarding a Message
(SMS/MMS)
“Messages” o “Message” o “Inbox”
(Email)
“Messages” o “Email” o “Inbox”
1. Select a folder.
2. Highlight the message you wish to forward.
3. Press [Options] and select “Forward”.
4. Perform steps 1 to 6 in “Creating a New Message” on
page 55.
Sorting the Messages in the List
(SMS/MMS)
“Messages” o “Message” o “Inbox”
(Email)
“Messages” o “Email” o “Inbox”
1. Select a folder.
2. Press [Options] and select “View Settings”.
3. Select “Sort”.
4. Select the desired sort option.
Cell Broadcasts (M 4-3)
This function may not be available on all mobile phone networks.
Contact your service provider for more information.
Enabling/Disabling Cell Broadcasts
“Messages” o “Cell Broadcasts” o “Switch On/Off”
1. Select “On” or “Off”.
Reading Cell Broadcast Messages
“Messages” o “Cell Broadcasts” o “Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press U.
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you want.
“Messages” o “Cell Broadcasts” o “Settings” o “Set
Info Subjects”
1. Press B.
2. Highlight the desired subject and press B to check.
3. Press [Save].
Messages
59
Area Info (M 4-4)
Messaging Settings (M 4-5)
Enabling/Disabling Area Info
“Messages” o “Area Info”
1. Select “On” or “Off”.
General Settings
“Messages” o “Messaging Settings” o
“General Settings”
1. Select the item you wish to set up.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit” to edit
current signature.
• “Auto Delete”:
Deletes the oldest message automatically, when the Inbox,
Sent or Both (Inbox and Sent) is full.
• “Message List View”:
Switches the mailbox listing.
• “Inbox Display Settings”
Switches the Inbox listing.
• “Sent Box Display Settings”
Switches the Sent box listing.
• “Scroll Unit”:
Scroll through messages by “Single Line”, “Half Page” or
“Whole Page”.
• “Message Type”:
Sets the type of message to send by default when a
message is composed. When set to “Free”, the message is
sent automatically either as an SMS or MMS as appropriate.
Note
• This function may not be available on all mobile phone networks.
Contact your service provider for more information.
• If Area Info is set to “On”, the standby time will decrease.
60
Messages
SMS Settings
“Messages” o “Messaging Settings” o “SMS Settings”
1. Select the item you wish to set up.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Automatic Resend”:
Tries to resend the failed SMS message up to two times
(“On” or “Off” selection).
• “Expiry Time”:
This indicates the number of days and hours for which a
message you send may remain undelivered to the message
recipient. During this period, the message service centre will
continually try to deliver the message to the recipient.
• “Message Centre”:
Enter the message centre number.
If you wish to enter a country code for a message to an
international number, long press Q until a + sign is
displayed.
• “Reply Path”:
Enables or disables adding a reply path to the message.
• “Connection Type”:
Sets the preferred connection type (“GPRS Preferred”, “CSD
Preferred”).
MMS Settings
“Messages” o “Messaging Settings” o “MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New” to enter
the following settings.
“Profile Name”:
MMS profile name (unique name)
“Proxy”:
Proxy setting for MMS
(When “Use Proxy” is set to “Off”, settings for “Access Point”
can be made in place of “Proxy”.)
“Use Proxy”:
Setting to connect by Proxy or not
“Relay Server URL”: MMS relay server
• “Home Download”:
Controls the message download timing inside your network
area.
“Always Download”: Downloads messages immediately
from the server.
“Always Defer”:
Defers message download.
• “Roaming Download”:
Controls the message download timing when roaming
outside of your network.
“Always Download”: Downloads messages immediately
from the server.
Messages
61
•
•
•
•
•
•
•
•
62
“Always Defer”:
Defers message download.
“Delivery Report”:
Enables or disables Delivery Report request.
“Automatic Resend”:
Tries to resend the failed MMS message up to two times
(“On” or “Off” selection).
“Delivery Report Allow”:
Confirms whether or not a report is sent notifying the sender
when you receive a message.
“Read Report”:
Enables or disables Read Report request.
“Read Report Allow”:
Enables or disables Read Report Allow when the recipient is
required to inform the sender that the message has been
read.
“Expiry Time”:
This indicates the number of days and hours for which a
message you send may remain undelivered to the message
recipient. During this period, the message service centre will
continually try to deliver the message to the recipient.
“Slide Duration”:
Sets the duration of the slide.
“Slide Auto Play”:
Enables or disables Slide Auto Play.
Messages
• “Send File Settings”:
Sets whether or not to send and save the file settings.
• “Creation Mode”:
When set to “Free”, you can attach files of any format to the
mail. When set to “Restricted”, only certain formats and
message sizes can be attached.
• “Hide Number”:
Sets whether to show or hide the sender’s address.
• “Delivery Time” (“Immediate”, “1 hour”, “12 hours”, “1
day”, “1 week”):
Sets the time the message is delivered after the Send key is
pressed.
• “Anonymous Rejection”:
Enables or disables the rejection of messages from
anonymous senders.
To Activate the MMS Account Profile
1. Select “MMS Accounts”.
2. Select the desired profile you wish to activate.
Email Settings
“Messages” o “Messaging Settings” o “Email Settings”
To Set an Email Account
1. Select “Email Accounts” and then select “Create New”.
2. Select the item you wish to set up.
“Account Name”:
Email account name (unique name)
“Incoming Server”: Server Name, User ID, Password, Port
Number, APOP Authentication and
Encryption for the incoming server
“Outgoing Server”: Server Name, User ID, Password, Port
Number, SMTP Authentication and
Encryption for the outgoing server
“Access Point”:
Access point for Email
“Email Address”:
Email address
“Advanced Settings”: Your Name, Signature, Download
Interval, Download Configuration, Max
Download Limit, Save Sent Messages
Speed Mail
The Speed Mail function allows you to initiate messaging from the
standby screen faster, with fewer keys to press.
The digit keys (H to O) can be used for speed mail.
A total of 8 data items can be assigned to these keys.
For details, see page 44.
1. Press a digit key in standby.
2. Press A to display the message screen.
The Email address assigned to the digit key pressed in step 1
is automatically entered in the recipient field.
To add a subject, highlight the subject field and press B. Then
enter the subject in the subject entry screen and press B.
3. Perform steps 4 to 6 in “Creating a New Message” on
page 55.
To Activate the Email Account Profile
1. Select “Email Accounts”.
2. Select the desired profile you wish to activate.
Messages
63
Browser (M 2)
Your phone is already configured to access the mobile Internet.
Your phone contains a WAP/Web browser used for surfing on the
mobile Internet, where you can get a lot of useful information.
Normally, pages are designed for a mobile phone.
Main Menu
“Browser” o “Homepage”
The homepage is displayed.
“Browser” o “Go to URL”
The URL entry screen is displayed. You can type in the URL of a site
directly.
“Browser” o “Bookmarks”
See page 65.
“Browser” o “My Saved Page”
You can view all the screenshots that have been saved onto the
handset memory.
“Browser” o “Access History”
The history of pages you have recently browsed is displayed.
“Browser” o “Browser Settings”
See page 65.
64
Browser
Navigating a WAP or Web Page
• a b c d:
Moves the cursor in the screen.
• A:
Launches the option menu if it has not been
launched.
Used to select an option from the option
menu.
• B:
Executes the highlighted item in the screen.
• C:
Opens the browser when in standby.
Moves to previous page when the browser is
active.
• F (short press): Exits the browser.
(long press): Turns off the phone.
Note
• When the motion control setting for “Browser” is set to “On”
(p. 100), you can zoom in or zoom out by tilting the phone
forward or backward. This is only available when the phone is
closed.
• When the phone is closed, use the side keys to navigate the
WAP/Web page.
Editing Bookmarks (M 2-3)
“Browser” o “Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following options:
(When a bookmark is highlighted)
“Edit”:
Edits URL address of the bookmark.
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”:
Creates new folders.
“Open in New Tab”: Opens the bookmark as a new tab.
(This option is available only from the
browser screen.)
“Send”:
Sends the URL address to recipients.
“Move”:
Moves bookmarks to another location
or into a folder.
“Details”:
Displays detailed information of the
WAP/Web page.
“Delete”:
Deletes a bookmark.
“Delete All”:
Deletes all bookmarks.
(When a folder is highlighted)
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”:
Creates new folders.
“Move”:
Moves folder and bookmarks in the
folder to another location.
“Rename Folder”:
Renames the folder.
“Delete”:
Deletes the folder and bookmarks in
the folder.
“Delete All”:
Deletes all folders and bookmarks.
(When there are no bookmarks)
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”:
Creates new folders.
Browser Settings (M 2-6)
“Browser” o “Browser Settings”
“Font Size”:
Sets the font size for browsing.
“Scroll Settings”:
Sets the scroll units and turns page
navigation on/off.
“Cursor Settings”:
Sets whether or not to show the cursor,
and its speed.
“Downloads”:
Sets whether or not to show images or
play back sound when accessing a
WAP/Web page.
“Memory Operation”: Clears Cache, Cookies, or
Authentication information.
“Security Settings”: Adjusts the security prompt level.
“Download to”:
Sets the preferred download location.
“Zoom Factor”:
Sets the zoom ratio for viewing a page.
“Zoom Area”:
Sets the window size for displaying
enlarged specific area.
“Initialize Browser”: Initializes the browser settings and
memory.
Browser
65
“Reset Settings”:
Resets all the browser settings to the
default settings.
Browser Options when Online
C o [Options]
“Home”:
Goes to the homepage.
“Forward”:
Goes to the next page.
“Open This Frame”:
Opens the selected frame.
(This option is available only when a
frame page is displayed.)
“Bookmarks”:
See page 65.
“My Saved Page”:
Displays all the browser screenshots
saved in the handset memory.
“Copy Text”:
Copies the text on the WAP/Web
page.
“Reload Page”:
Reloads the WAP/Web page to get
updated information.
“Go to URL”:
Allows you to type in the URL of a
site directly. Handset browser will go
to the WAP/Web page that you
entered.
“Save Items”:
Saves items from the browsing
pages.
66
Browser
“Fit To Screen Width”/“Actual Page Width”:
Allows the browser to display in
complete page mode or Virtual
Screen mode.
“Convenient Functions”: Displays functions for page
operation.
“Access History”:
Shows previously browsed pages.
ÂŽ
Displays FlashÂŽ menu. (This option
“Flash Menu”:
is available only when a FlashÂŽ file
is displayed.)
“SVG Menu”:
Displays SVG menu. (This option is
available only when a SVG file is
displayed.)
“Open in New Tab”:
Opens a new window. (This option is
available only when one window is
opened and a URL link is
highlighted.)
“Tab Menu”:
Displays the tab menu. (This option
is available only when two or more
windows are opened.)
“Settings”:
Displays the settings menu.
“Help”:
Displays the Help screen.
“Exit”:
Exits the browser.
Gallery (M 6)
Gallery contains all your pictures, music and videos. You can also
transmit pictures, sounds and video clips via infrared or Bluetooth
wireless technology to other OBEX-enabled devices.
Picture Gallery (M 6-1)
Viewing Pictures
“Gallery” o “Picture Gallery”
1. Select the file you wish to view.
The selected picture is displayed.
Note
• To switch between viewing handset or memory card content,
select the first item in the options menu.
• When the motion control action setting for “Image Viewer” is set
to “On” (p. 100), you can change the picture being displayed by
shaking the phone sideways. This is only available when the
phone is closed.
Using Images as Wallpaper
“Gallery” o “Picture Gallery”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Editing Pictures
“Gallery” o “Picture Gallery”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Edit”.
3. Select “Picture Editor” or “Composite”.
4. Select the desired option.
Note
• “Picture Editor” may not be available depending on the original
picture and copyright issued.
Saving an Image to Phonebook Entries
This option can only be used for pictures saved in the handset
memory.
“Gallery” o “Picture Gallery”
1. Highlight the file you wish to add to Phonebook.
2. Press [Options] and select “Add to Contacts”.
To overwrite, select “As New Detail” and select the entry you
wish to save.
To save as a new entry, select “As New”.
Gallery
67
Video Gallery (M 6-2)
Playing Back Video Clip Files
“Gallery” o “Video Gallery”
1. Select the file you wish to play back.
To pause playback, press B.
To resume, press B again.
To stop playback, press U.
Note
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Using a Video Clip as a Ring Video Clip
You can set your video clip to play back when the phone rings.
“Gallery” o “Video Gallery”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
SD VIDEO (M 6-3)
Video clips with the “ASF” format that are recorded by a video
camera can also be managed with SD VIDEO.
“Gallery” o “SD VIDEO”
1. Select the desired file.
To pause playback, press B.
To resume, press B again.
To delete a file, highlight the file, press [Options] and select “Delete”.
68
Gallery
Note
• By default, video clips are recorded in 3GP format. To enable SD
VIDEO recording, change the setting in the Video Camera as
shown below.
[Options] o “Record Time/Size” o “SD VIDEO”
Sound Gallery (M 6-4)
The downloaded sound files and the AMR data recorded by Voice
Recorder are managed in Sound Gallery. The default ringtones are
not contained within Sound Gallery. Only the sound files that can be
played back on the phone are stored in Sound Gallery.
Playing Back Sound Files
“Gallery” o “Sound Gallery”
1. Select the file you wish to play back.
To stop playback, press U.
Note
• Playback may not be available for some sound files.
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Using the Sound Files as a Ringtone
“Gallery” o “Sound Gallery”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as ringtone”.
Themes (M 6-5)
You can easily customise the display by using the theme files.
Note
• Preset themes are not included in “Themes” in “Gallery”.
Viewing Previews
“Gallery” o “Themes”
1. Highlight the theme file you wish to preview.
2. Press B.
The selected theme file is displayed.
Note
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Setting a Theme
“Gallery” o “Themes”
1. Select the desired theme file.
The selected theme file is set as the default theme.
FlashÂŽ (M 6-7)
Note
• Only Flash® files up to 150 KB can be played back.
Using FlashÂŽ as Wallpaper
“Gallery” o “Flash®”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Using FlashÂŽ as a Ringtone
“Gallery” o “Flash®”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as ringtone”.
Other Documents (M 6-8)
Opening a Document File
“Gallery” o “Other Documents”
1. Select the desired file.
Note
• To switch between viewing handset or memory card content,
select the first item in the options menu.
Playing Back FlashÂŽ Files
“Gallery” o “Flash®”
1. Select the file you wish to play back.
To stop playback, press U.
Gallery
69
Common Option Menus
Gallery contains the following folders.
“Gallery” o “Picture Gallery”
“Gallery” o “Video Gallery”
“Gallery” o “SD VIDEO”
“Gallery” o “Sound Gallery”
“Gallery” o “Themes”
“Gallery” o “Java™ Gallery”
“Gallery” o “Flash®”
“Gallery” o “Other Documents”
Activating Files with Copyright Protection (DRM)
Some pictures, sound files, video clips, FlashÂŽ files and theme files
have a digital copy protection program, which is called DRM (Digital
Rights Management). You need to activate the digital licence
permission to open the files. Files protected with DRM are displayed
with .
1. Select the appropriate folder for the desired file type.
2. Highlight the file you wish to activate.
3. Press [Options] and select “Get Contents Key”.
Note
• Some pictures with DRM may not be opened even when an
attempt is made to activate it.
70
Gallery
Sending Gallery Data
1. Select the appropriate folder for the desired file type.
2. Highlight the desired file.
3. Press [Options] and select “Send”.
4. Select “As Message”, “As Email”, “Bluetooth”, “Infrared” or
“Send via IrSS”.
Note
• Pictures/Sounds/Video clips/Themes/Flash® files/Other
Documents data protected by copyright cannot be sent attached
to a message, with the exception of Separate Delivery files.
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving Gallery Data
When the phone receives Gallery data, a confirmation message is
displayed in standby.
1. Select “Yes”.
The received data is saved in the corresponding Gallery folder.
Using Gallery Data
1. Select the appropriate folder for the desired file type (p. 70).
2. Highlight the desired file.
3. Press [Options] and select “Manage Items”.
4. Select the desired option.
“Sort”:
Sorts files according to a specific
sequence.
“Rename”:
Renames the file or folder.
“Create Folder”:
Creates a new folder.
“Change List View”: Changes the list view.
“Check All”:
Selects all files in the list.
“Delete All”:
Deletes all files in the folder.
Note
• “Manage Items” is not available for “Java™ Gallery”.
To Delete the File
1. Select the appropriate folder for the desired file type (p. 70).
2. Highlight the desired file.
3. Press [Options] and select “Delete”.
To See the Gallery Details
1. Select the appropriate folder for the desired file type (p. 70).
2. Highlight the file you wish to view the details of.
3. Press [Options] and select “Details”.
Selecting Multiple Files
1. Select the appropriate folder for the desired file type (p. 70).
2. Highlight the file you wish to select.
3. Press [Options] and select “Check”.
4. Repeat steps 2 and 3 until you select all the desired files.
Memory Status (M 6-9)
Handset Memory: Pictures, Videos, Sound Gallery, Themes,
Java™ Gallery, Flash®, Other Documents,
Others, Total and Free
Memory Card:
Pictures, Videos, Sound Gallery, Themes,
FlashÂŽ, Other Documents, Others, Total and
Free
“Gallery” o “Memory Status”
1. Select “Handset Memory” or “Memory Card”.
Note
• When a memory card is inserted into the phone, “Temp Card
Folder” is additionally displayed above “Memory Status”.
• The shortcut keys for “Temp Card Folder” is M 6-9 and the
shortcut keys for “Memory Status” changes to M 6-10.
Gallery
71
Java™ (M 1)
Java™ Gallery (M 1-1)
Executing Applications
“Java™” o “Java™ Gallery”
1. Select the title of the application you wish to execute.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Display
“Java™” o “Java™ Gallery”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
Setting Permission
“Java™” o “Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”:
Sets permission to make voice calls.
“Network Access”: Sets permission to access the network.
“Messaging”:
Sets permission to perform SMS
messaging.
“Autorun”:
Sets permission to perform the Autorun
function.
72
Java™
“Use Multimedia”:
Sets permission to use the multimedia
recording.
4. Select one of the following options:
“Always Ask”:
The confirmation message is displayed
every time the security sensitive function
is executed.
“Ask Once”:
The confirmation message is displayed
the first time the security sensitive
function is executed.
“No”:
Execution of the security sensitive
function is not authorised.
Note
• Options displayed in step 4 depend on the item selected in step 3.
• To clear all the permission settings, select “Reset” in step 3.
• Some permissions are not available for some Java™
applications.
Viewing Application Information
“Java™” o “Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
“Java™” o “Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
Java™ Settings (M 1-2)
Application Volume
“Java™” o “Java™ Settings” o “Application Volume”
1. Press a (or d) to increase the volume or press b (or c)
to decrease the volume and then press B.
Backlight
“Java™” o “Java™ Settings” o “Backlight” o
“Switch On/Off”
1. Select from “Always On”, “Always Off” or “Normal
Settings”.
“Always On”:
Lit while the application is operated.
“Always Off”:
Unlit while the application is operated
even if a key is pressed.
“Normal Settings”: Works with the main backlight setting
(p. 95).
To Set the Blinking Operation
If set to “Off”, the backlight cannot be controlled from the
application.
“Java™” o “Java™ Settings” o “Backlight” o “Blink”
1. Select “On” or “Off”.
Vibration
“Java™” o “Java™ Settings” o “Vibration”
1. Select “On” or “Off”.
Java™
73
Calls & Alarms
“Java™” o “Java™ Settings” o “Calls & Alarms”
1. Select “Voice Call”, “Incoming Message” or “Alarm”.
2. Select the desired method.
• “Call Priority”, “Message Priority” or “Alarm Priority”:
The application is suspended automatically, and you can
receive a call or a message, or the alarm will sound.
After finishing the call or receiving the message, or when the
alarm ends, the suspend indicator ( ) is displayed letting
you know there is a suspended application.
• “Call Notice”, “Message Notice” or “Alarm Notice”:
The information is displayed on the first line of the screen
while the application continues. If you press D, the
application is suspended, and you can receive the call. After
finishing the call or receiving the message, the suspend
indicator ( ) is displayed letting you know there is a
suspended application.
74
Java™
Set Java™ Wallpaper
To Switch the Java™ Wallpaper On or Off
“Java™” o “Java™ Settings” o “Set Java™ Wallpaper”
o “Switch On/Off”
1. Select “On” or “Off”.
To Set the Activation Time
“Java™” o “Java™ Settings” o “Set Java™ Wallpaper”
o “Activation Time”
1. Enter an activation time from 1 to 10 seconds (in 2 digits)
using the keypad.
To Set the Suspend Time
“Java™” o “Java™ Settings” o “Set Java™ Wallpaper”
o “Suspend Time”
1. Set the desired time period from “after 15 min.” to “after
6 hours”.
Surround
You can set surround sound for Java™ applications.
“Java™” o “Java™ Settings” o “Surround”
1. Select “On” or “Off”.
Default Settings
“Java™” o “Java™ Settings” o “Set to Default”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
Clearing All Memory
“Java™” o “Java™ Settings” o “Memory All Clear”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
Java™ Information (M 1-3)
“Java™” o “Java™ Information”
The information about the licences belonging to Java™ is
displayed.
Java™
75
Organiser (M 3)
Calendar (M 3-1)
Creating a New Entry
“Organiser” o “Tools 1” tab o “Calendar”
1. Select the desired day to which you want to add an event.
2. Select “Add New Entry”.
3. Enter the subject.
4. Enter the start date and time.
5. Select the desired category.
6. Select the reminder time.
When selecting “Other”, enter the desired reminder date and
time.
7. Press [Save].
Note
• If the date and time settings have not been entered, the date and
time entry screen is displayed (p. 99).
• The reminder will not sound when the profile is set to “Silent”,
but will sound when “General Volume” (p. 97) is set to “Silent”.
• You can display the Stamp screen by pressing H in the
monthly calendar view. Select the desired category and press B.
76
Organiser
To Change the Settings
1. Select the item you wish to change in the New Entry screen.
• “Reminder”:
Sets options including “Reminder Time”,
“Assign Tone/Video” and “Duration” for
the reminder.
• “Repeat”:
Sets the number of times the reminder
sounds.
• “Location”:
Sets the location for the schedule entry.
• “Description”:
Enables entering a memo for the
schedule entry.
• “Secret”:
Sets to show or hide the schedule entry.
Set to “On” to make the data secret or
select “Off” to leave it as it is.
Viewing a Schedule Entry
“Organiser” o “Tools 1” tab o “Calendar”
1. Select the day you wish to view.
2. Select the desired entry.
To Search by Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to enter the
desired date.
Tip
• You can control the view by using the following:
Monthly or 2-month view
P:
Displays the previous month or previous screen.
R:
Displays the next month or next screen.
Q: Displays the Help screen.
H: Displays the Stamp screen (monthly view only).
J:
Displays the Set Colour screen.
K: Moves the cursor to today.
L:
Displays the Find (By Subject) screen.
N: Displays the Go to (Enter Date) screen.
O:
Displays the Find (By Category) screen.
c/ d : Moves the cursor to left (the previous day) or to right
(the next day).
a/ b : Moves the cursor upward (last week) or downward
(next week).
Weekly view
P:
Displays the previous week.
R:
Displays the next week.
Q: Displays the Help screen.
J:
Displays the Set Colour screen.
K: Moves the cursor to today.
L:
Displays the Find (By Subject) screen.
N: Displays the Go to (Enter Date) screen.
O:
Displays the Find (By Category) screen.
c/ d : Moves the cursor to left (the previous day) or to right
(the next day).
a/ b : Moves the weekly view up or down (the previous hour
or next hour).
Setting a Colour
You can highlight a date or days of the week with seven colour
options.
“Organiser” o “Tools 1” tab o “Calendar”
For Date Colour
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Colour”.
3. Select “By Date”.
4. Select the desired colour.
Organiser
77
For Days of the Week Colour
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Colour”.
3. Select “By Week” and then select days of the week you wish
to colour.
4. Select the desired colour.
Note
• If the same date is set with both a date colour and a day of the
week colour, the date is highlighted in the date colour.
• Up to 100 days can be set for the highlights.
Setting a Holiday
You can set personal holidays in the calendar.
“Organiser” o “Tools 1” tab o “Calendar”
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Holiday”.
3. Enter the name.
4. Enter the date.
5. Select the desired frequency.
6. Press [Save].
78
Organiser
Finding a Schedule Entry
To Search by a Subject
“Organiser” o “Tools 1” tab o “Calendar”
1. In any view, press [Options] and select “Find”.
2. Select “By Subject”.
3. Enter a few letters of the subject.
Search results are displayed in time order.
To Search by a Category
“Organiser” o “Tools 1” tab o “Calendar”
1. In any view, press [Options] and select “Find”.
2. Select “By Category”.
3. Select a desired category.
Search results are displayed in time order.
Editing a Schedule Entry
“Organiser” o “Tools 1” tab o “Calendar”
1. Select the day you wish to edit.
2. Highlight the entry you wish to edit, press [Options], then
select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day”: Deletes all entries for the selected day.
“All This Month” (monthly view):
Deletes all entries for the selected month.
“Last Two Months” (2-month view):
Deletes all entries for the selected two
months.
“All This Week” (weekly view):
Deletes all entries for the selected week.
“Up to Last Month” (monthly view):
Deletes all entries before the selected month.
“Up to Last Week” (weekly view):
Delete all entries before the selected week.
“All Appointments”:
Deletes all entries in this application.
Sending a Schedule Entry
“Organiser” o “Tools 1” tab o “Calendar”
1. Select the day including schedule entries you wish to send.
2. Highlight the entry you wish to send, press [Options], then
select “Send”.
3. Select “As Message”, “As Email”, “Via Bluetooth” or “Via
Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 113.
For “Via Infrared”
For details, see “Infrared” on page 115.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving a Schedule Entry
1. Select “Yes”.
The received entry is saved in the Calendar.
Select “No” to reject.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory Status”.
Organiser
79
Alarms (M 3-2)
Setting the Alarms
“Organiser” o “Tools 1” tab o “Alarms”
1. Select the blank line (--:--) you wish to set an alarm to.
2. Enter the desired time.
3. Press [Save].
To Change the Settings
1. Select the item you wish to change in the Set Alarm screen.
• “Subject”:
Sets the subject for the alarm setting.
• “Repeat”:
Sets the number of times the alarm sounds.
• “Assign Tone/Video”:
Assigns a tone or video clip file to the alarm.
• “Snooze”:
Sets the snooze option.
• “Alarm Volume”:
Sets the desired volume.
The alarm will not sound when “Alarm Volume” is set to
“Silent”.
• “Vibration”:
Sets the vibration pattern of the alarm.
For details on selecting a vibration, see “Vibration” on
page 98.
80
Organiser
• “Duration”:
Sets the duration of the alarm.
Resetting an Alarm
“Organiser” o “Tools 1” tab o “Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarms
“Organiser” o “Tools 1” tab o “Alarms”
1. Highlight an alarm.
2. Press [Options] and select “Clear All”.
Setting for Silent Profile
“Organiser” o “Tools 1” tab o “Alarms” o “Settings”
1. Select “For Silent Profile”.
2. Select “Ring” or “Do not Ring”.
Setting the Alarm to the World Clock Time
“Organiser” o “Tools 1” tab o “Alarms” o “Settings”
1. Select “Link to World Clk”.
2. Select “On” or “Off”.
Tasks (M 3-3)
Creating a New Entry
“Organiser” o “Tools 1” tab o “Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and time.
4. Press [Save].
Note
• If the date and time settings have not been entered, the date and
time entry screen is displayed (p. 99).
To Select the Reminder Time
1. On the New Entry screen, select “Reminder”.
2. Select “Reminder Time”.
3. Select the reminder time.
When selecting “Other”, enter the desired reminder date and
time.
To Change the Type of Alarm Tone or Video Clip File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or
“Flash®”.
4. Select the desired tone or video clip file.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” or “Assigning a
Ring Video Clip for an Incoming Call” on page 97.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the desired duration.
To Set the Alarm Volume
“Organiser” o “Tools 1” tab o “Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “Alarm Volume”.
3. Press a (or d) to increase the volume or press b (or c)
to decrease the volume and then press B.
To Set the Vibration
“Organiser” o “Tools 1” tab o “Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “Vibration”.
3. Select “On”, “Link to Sound” or “Off”.
Organiser
81
To Set for the Silent Profile
“Organiser” o “Tools 1” tab o “Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “For Silent Profile”.
3. Select “Ring” or “Do not Ring”.
Making the Entry as Completed or Uncompleted
“Organiser” o “Tools 1” tab o “Tasks”
1. Highlight the desired entry.
2. Press [Done].
To make the entry incomplete, press [Not Yet].
To Set the Priority
1. On the New Entry screen, select “Priority”.
2. Select “Normal”, “High” or “Low”.
Finding a Task Entry
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off” to leave
it as it is.
To Unlock the Secret Settings Temporarily
“Organiser” o “Tools 1” tab o “Tasks”
1. Press [Options] and select “Unlock Temporarily”.
Note
• Once the phone has returned to standby, the temporarily
unlocked tasks are reset as secret data.
82
Organiser
To Search by a Subject
“Organiser” o “Tools 1” tab o “Tasks”
1. Press [Options] and select “Find”.
2. Select “By Subject”.
3. Enter a few letters of the subject and press B.
Search results are displayed in time order.
To Search by a Due Date
“Organiser” o “Tools 1” tab o “Tasks”
1. Press [Options] and select “Find”.
2. Select “By Due Date”.
3. Select a desired due date and press B.
Search results are displayed in time order.
Sending a Task Entry
“Organiser” o “Tools 1” tab o “Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “As Email”, “Via Bluetooth” or “Via
Infrared”.
Calculator (M 3-4)
“Organiser” o “Tools 1” tab o “Calculator”
For “Via Bluetooth”
For details, see “Bluetooth” on page 113.
For “Via Infrared”
For details, see “Infrared” on page 115.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press U.
To do the calculations, press B.
To start a new calculation, press U.
Viewing the Memory Status
“Organiser” o “Tools 1” tab o “Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser” o “Tools 1” tab o “Tasks” o [Options] o
“Delete”
1. Select the desired option.
“This Task”:
Deletes the selected entry.
“All Completed Tasks”: Deletes all checked entries.
“All Tasks”:
Deletes all entries.
Organiser
83
Rate Conversion
To Set a Currency Conversion Rate
“Organiser” o “Tools 1” tab o “Calculator” o [Options]
o “Currency Converter” o “Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the domestic or foreign currency.
To Convert a Value
“Organiser” o “Tools 1” tab o “Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to Foreign”.
Expenses Memo (M 3-5)
Recording in the Expenses Memo (M 3-5-1)
“Organiser” o “Tools 1” tab o “Expenses Memo” o “Add
New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals (M 3-5-2)
“Organiser” o “Tools 1” tab o “Expenses Memo” o
“Totals”
Recorded expenses are displayed on the screen.
84
Organiser
To Change Category
1. In the total view, highlight the desired item.
2. Press [Change].
3. Select the desired category.
To Change Amount
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item or All Items
1. In the total view, highlight the desired item.
2. Press [Options] and select “Delete Item” or “Delete All”.
Editing the Category Name (M 3-5-3)
“Organiser” o “Tools 1” tab o “Expenses Memo” o “Edit
Category”
1. Select the desired category name.
2. Modify the name.
Stopwatch (M 3-d-1)
World Clock (M 3-d-3)
You can store 4 lap times when using the stopwatch function.
“Organiser” o “Tools 2” tab o “Stopwatch”
1. Press [Start].
Press [LAP] to view the lap time before the stopwatch stops.
Last 4 lap times are saved.
2. Press [Stop].
Setting the Time Zone
“Organiser” o “Tools 2” tab o “World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the world map.
2. Press c or d to change the time zone.
3. Press [Accept].
Resetting the Time
1. After stopping the stopwatch, press [Options] and select
“Reset”.
To Set the Custom Time Zone
“Organiser” o “Tools 2” tab o “World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Custom].
3. Enter the desired city name and time difference.
Countdown Timer (M 3-d-2)
“Organiser” o “Tools 2” tab o “Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press [Start].
Press [Suspend] to pause the countdown.
Press [Resume] to continue counting.
3. When the countdown has finished, press [Stop] and then
press [Start] to start the countdown again.
Setting Daylight Saving
“Organiser” o “Tools 2” tab o “World Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and select
“Edit”.
2. Modify the desired time.
Organiser
85
Hour Minder (M 3-d-4)
Document Viewer (M 3-d-d-1)
Hour Minder function informs you of the time by sounding a tone.
“Organiser” o “Tools 2” tab o “Hour Minder”
1. Select “Switch On/Off”.
2. Select “On” or “Off”.
3. Select “Select Time”.
4. Select the desired time.
5. Press [Save].
You can view PC documents.
“Organiser” o “Tools 3” tab o “Document Viewer”
1. Select the file you wish to view.
To cancel reading, press U or C.
To Change the Settings
“Organiser”o “Tools 2” tab o “Hour Minder”
1. Select “Advanced”.
2. Select the item you wish to change.
“Assign Tone/Video”: Sets the tone or video.
“Volume”:
Sets the volume of the tone.
“Vibration”:
Sets the vibration.
“Duration”:
Sets the duration.
“For Silent Profile”:
Sets whether to sound the tone when
the profile is set to “Silent”.
“Link to World Clk”: Sets to sound the tone according to the
time of the World Clock.
86
Organiser
Note
• You can view the following types of files with the document
viewer: PDF (.pdf), Microsoft Excel (.xls), Microsoft Word (.doc),
Microsoft PowerPoint (.ppt).
• For the shortcut keys that can be used in the document viewer,
refer to the help by pressing [Options] and selecting “Help”.
• A file of up to 10 MB can be opened.
• Some files may not be displayed correctly depending on the type
or size, such as a file of vertical text (not supported) or when the
memory runs out while viewing a large document.
• Some PDF files may not be displayed correctly due to a shortage
of memory even if the file size is not large when numerous fonts
are embedded or image data is pasted.
• Depending on how the PDF document was created, some
characters in a PDF file may not be displayed.
• Document files that are saved in Gallery or linked in a WAP/Web
page can be viewed with the document viewer.
• When the motion control setting for “Document Viewer” is set to
“On” (p. 100), you can zoom in or zoom out by tilting the phone
forward or backward. This is only available when the phone is
closed.
• Document files that are protected with a password cannot be
viewed with the document viewer.
Text Templates (M 3-d-d-2)
You can register up to 500 text templates for use in text messages
and multimedia messages. The maximum capacity of the text
templates is 8192 characters.
Adding Phrases to Text Templates
“Organiser” o“Tools 3” tab o “Text Templates” o “Add
New Template”
1. Enter the text.
2. Select the desired category.
Changing the Category
“Organiser” o“Tools 3” tab o “Text Templates”
1. Highlight the desired text template.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
Sending Text Templates
“Organiser” o“Tools 3” tab o “Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 113.
For “Via Infrared”
For details, see “Infrared” on page 115.
Editing Text Templates
“Organiser” o“Tools 3” tab o “Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit Text”.
To view the text template, press B.
To delete the text template, press [Options] and select
“Delete”.
3. Modify the text and press B.
Organiser
87
Voice Recorder (M 3-d-d-3)
The recorded voice clip is saved in Sound Gallery. Voice clips are
saved in .amr format.
Recording a Voice Clip
“Organiser” o“Tools 3” tab o “Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over, press B.
2. Select “Save” to save the voice clip.
Note
• Press a (or V) or b (or W) to adjust the sound volume when
playing back the recorded file.
Sending Voice Clips
“Organiser” o“Tools 3” tab o “Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over, press B.
2. Select “Save and Send”.
Selecting the Record Time
“Organiser” o“Tools 3” tab o “Voice Recorder” o
[Options] o “Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are automatically
saved in the memory card.
88
Organiser
Selecting Storage Memory
“Organiser” o“Tools 3” tab o “Voice Recorder” o
[Options] o “Save Recording to”
1. Select the desired location.
When selecting “Choice”, you can select the location when
saving a voice clip.
Scanner (M 3-d-d-4)
With the built-in digital camera, you can read barcodes in QR code
format and also read the text on business cards. The scanned data
can be saved as a Phonebook entry, URL, Email address and text.
Note
• When scanning does not take place, it may be due to one of the
following reasons: type or size of barcode or business card,
scratches, dirt, damage, print quality, light reflection, etc.
Reading Barcodes
“Organiser” o“Tools 3” tab o“Scanner” o“Scan
Barcode”
1. Display the barcode using the camera.
2. Press [Scan].
3. Press [Options] and select the desired option.
The options vary depending on the scanned data.
“Save”:
The result is saved.
“Send Message”: The result is sent as SMS or MMS.
“Save to Templates”:The result is saved as text.
“Copy”:
The result is copied.
To Use the Continuous Scanning
1. In scanning mode, press [Options] and select “Continuous
Scan”.
2. Select “On” or “Off”.
Scanning Business Cards
“Organiser” o“Tools 3” tab o“Scanner” o“Scan Card”
1. Frame the business card in the centre of the screen using
the camera and press [Read].
To cancel scanning, press [Back] or U.
2. Press [Scan] or B.
The scanned results are displayed.
3. Press [Assign].
The scanned data is saved to Phonebook.
When the number of characters that can be scanned is
exceeded, select “Yes”.
To paste the scanned data to a message, press [Options] and
select “Send Message”.
To save the scanned data as a text template, press [Options]
and select “Save to Templates”.
To copy the scanned data, press [Options] and select “Copy”.
Note
• Only Simplified Chinese and alphanumerical characters can be
scanned.
• The following items can be saved to a Phonebook entry: name,
phone number, fax number, Email address, postal address,
postal code, company name, division, post, URL address, notes
(date scanned, etc.).
• Depending on the business card, the contents may not be
scanned or recognized (read) correctly, and characters and
symbols not on the business card may be included in the
scanned results.
• Text cannot be scanned from business cards:
• With background designs
• That are handwritten or have handwriting-like font
• That have both horizontal and vertical text
• That are shown in a display
Organiser
89
• Scanning may not take place in the following cases:
• The contrast between the text and background is low.
• There is extremely small font used on the business card.
• Italics, ancient characters or irregular characters are used on
the business card.
• The business card is printed on glossy paper.
• Logos or logo-type characters are used on the business card.
• Characters are extremely close to each other or are touching.
• The scanned data may not be classified as the correct item.
• The + symbol for an international number may not be saved to
the Phonebook even if it is scanned from the business card.
• Make sure the business card is displayed completely in the
screen. Be sure that objects other than the business card
(especially those with text) are not displayed in the screen.
• Scanning is easier when the font displayed is larger, however, if
the camera is placed too close to the business card, the text will
become out of focus. Hold the camera at least 10 cm away from
the business card.
• Up to 5 phone numbers and 5 Email addresses can be saved in
a Phonebook entry.
To Select the Focus Mode
“Organiser” o“Tools 3” tab o“Scanner” o“Scan Card”
1. Press [Options] and select “Focus”.
2. Select “Auto Focus”, “Macro” or “Manual Focus”.
90
Organiser
To Set the Mobile Light
“Organiser” o“Tools 3” tab o“Scanner” o“Scan Card”
1. Press [Options] and select “Mobile Light”.
2. Select “On” or “Off”.
To Adjust the Exposure
“Organiser” o“Tools 3” tab o“Scanner” o“Scan Card”
1. Press [Options] and select “Exposure”.
2. Select the desired exposure.
Viewing the Scanned Data
“Organiser” o“Tools 3” tab o“Scanner” o“Scanned
Results”
1. Highlight the data you wish to view, then press [View].
Phone Help (M 3-d-d-5)
“Organiser” o “Tools 3” tab o “Phone Help”
1. Select “Settings Method”, “Common Functions” or “Key
Operation”.
2. Press a or b.
SIM Application (M 10)
You can refer to the information on the SIM card. Contact your
service provider for further details.
SIM Application
91
Settings (M 9)
Phone Settings
Setting a Profile
There are 4 profiles: “Normal”, “Car”, “Silent” and “Original”.
Activating a Profile
“Settings” o “Phone Settings” tab o “Profiles”
1. Select the desired profile.
Note
• When a profile is set, the corresponding indicator described on
page 21 is displayed in standby.
• For “Silent” and “Car” profiles, some of the settings, such as
volume level, cannot be changed.
Resetting Profile Settings
“Settings” o “Phone Settings” tab o “Profiles”
1. Highlight the profile you wish to reset.
2. Press [Reset].
3. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
92
Settings
Event Light
“Settings” o “Phone Settings” tab o “Profiles”
1. Highlight “Car”, “Silent” or “Original”.
2. Press [Edit].
3. Select “Event Light”.
4. Select the desired option.
“For Voice Call”:
Flashes when an incoming voice call is
received.
“For New Message”: Flashes when a new message is
received.
“Java Start”:
Flashes when Bluetooth notification is
received.
“Delivery Report”:
Flashes when a delivery report is
received.
Status Light
“Settings” o “Phone Settings” tab o “Profiles”
1. Highlight “Car”, “Silent” or “Original”.
2. Press [Edit].
3. Select “Status Light”.
4. Select the desired option.
“For Missed Call”:
Flashes when an incoming voice call is
missed.
“For New Message”: Flashes when a new message is
missed.
“For Answer Phone”: Flashes when a new answer phone
message is saved.
“Java Start”:
Flashes when Bluetooth notification is
missed.
“Delivery Report”:
Flashes when a delivery report is
missed.
Any Key Answer
For details, see page 30.
“Settings” o “Phone Settings” tab o “Profiles”
1. Highlight “Car”, “Silent” or “Original”.
2. Press [Edit].
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
Answer Phone
For details, see page 103.
“Settings” o “Phone Settings” tab o “Profiles”
1. Highlight “Silent” or “Original”.
2. Press [Edit].
3. Select “Answer Phone”.
4. Select “On” or “Off”.
Setting the Display
You can change the display settings.
Setting the Wallpaper (M 9-2-1)
“Settings” o “Phone Settings” tab o “Display Settings”
o “Wallpaper”
1. Select “Vertical” or “Horizontal”.
2. Select the folder in which the picture you wish to set is
contained.
Pictures can be selected from “Preset Pictures”, “Picture
Gallery”, “Flash®” or “Other Documents”.
3. Select the desired picture.
4. After displaying the picture, press B.
Note
• Some pictures cannot be used because of their picture and data
types.
• Wallpaper can be linked to a theme. Select “Link to Theme” in
step 2.
Settings
93
Assigning Pictures (M 9-2-2)
To Set Built-in Pictures
“Settings” o “Phone Settings” tab o “Display Settings”
o “Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Preset Animation” when you select “Power On” or
select “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you select
“Incoming Voice Call” or “Alarm” in step 1.
To Set Saved Pictures
“Settings” o “Phone Settings” tab o “Display Settings”
o “Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Picture Gallery”, “Flash®” or “Other Documents”.
3. Select the desired picture.
4. After displaying the picture, press B.
5. Specify the area you wish to display using the navigation
keys, then press B.
Note
• Some pictures cannot be used because of their picture and data
types.
94
Settings
Setting the Font Size (M 9-2-3)
“Settings” o “Phone Settings” tab o “Display Settings”
o “Font Size Settings”
1. Select “Menu”, “Entering Text”, “Messaging” or “Viewing
the Web”.
2. Select the desired font size.
Setting the Standby Display (M 9-2-4)
You can set the standby screen display.
“Settings” o “Phone Settings” tab o “Display Settings”
o “Standby Display”
1. Select “Clock/Calendar”, “Display Icons” or “Show Operator
Name”.
Setting the Vivid Mode (M 9-2-5)
“Settings” o “Phone Settings” tab o “Display Settings”
o “Vivid Mode”
1. Select the desired mode.
Setting the Greeting Message (M 9-2-6)
You can set the message which is displayed when the phone is
turned on.
“Settings” o “Phone Settings” tab o “Display Settings”
o “Greeting Message”
1. Select “Switch On/Off” and then select “On” or “Off”.
Setting the Display Saving (M 9-2-8)
“Settings” o “Phone Settings” tab o “Display Settings”
o “Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is set to 1
minute.
Backlight (M 9-2-7)
You can specify a desired time to elapse before the backlight turns
off, which will help conserve battery life.
Note
• To cancel the Display Saving: The display saving continues until
either a key is pressed or there is an incoming alert. The first key
press only cancels this function. You must press another key in
order to enter any numerical or text value.
To Select the Backlight Time Out
“Settings” o “Phone Settings” tab o “Display Settings”
o “Backlight” o “Time Out”
1. Select the desired time.
Select “Off” to shut it off.
When selecting “Other”, enter the desired time.
To Adjust the Brightness of the Backlight
“Settings” o “Phone Settings” tab o “Display Settings”
o “Backlight” o “Brightness”
1. Press a (Light) and b (Dark) to switch between 5 levels of
clarity.
2. Press B.
Setting the Display Manner (M 9-2-9)
You can set the backlight to turn off for a specified time. If any
operation is performed while Display Manner is set, the backlight
turns on. Display Manner is resumed when the backlight dims.
“Settings” o “Phone Settings” tab o “Display Settings”
o “Display Manner”
1. Select “Switch On/Off”.
2. Select “On” or “Off”.
Note
• You can set the auto brightness adjustment function by selecting
“Auto Sensor” in step 1.
Settings
95
To Set the Screen Time Out when the Phone is Closed
“Settings” o “Phone Settings” tab o “Display Settings”
o “Display Manner”
1. Select “Lights out period”.
2. Enter the start time and end time.
3. Press [Save].
Note
• Enter the start and end times according to the format set in “Time
Format”.
• If the clock settings have not been entered, the date and time
entry screen is displayed (p. 99).
Setting the Display Time when the Phone is Closed
(M 9-2-10)
You can specify a desired time to elapse before the backlight and
screen turn off after the slider is closed.
“Settings” o “Phone Settings” tab o “Display Settings”
o “CLS Disp. Time”
1. Select the desired option.
“1 sec.”:
The screen turns off after 1 second.
“3 sec.”:
The screen turns off after 3 seconds.
“5 sec.”:
The screen turns off after 5 seconds.
The backlight turns off after 5 seconds,
“10 sec.”:
and the screen turns off after 10 seconds.
“Follow the Settings”: The backlight and screen turn off
according to normal settings.
96
Settings
Note
• Regardless of the Keypad Lock setting, the screen turns off after
5 seconds.
Setting the Caller Display (M 9-2-11)
You can set the phone to show or hide the caller’s number when
the slider is closed.
“Settings” o “Phone Settings” tab o “Display Settings”
o “Caller Display”
1. Select “On” or “Off”.
Select “Off” to hide the caller’s name and number.
Setting the Dial Number (M 9-2-12)
“Settings” o “Phone Settings” tab o “Display Settings”
o “Dial Number”
1. Select the desired type of dial number.
Themes (M 9-3)
“Settings” o “Phone Settings” tab o “Themes”
1. Select “Preset Themes” or “My Themes”.
2. Select the desired theme file.
Sound Settings (M 9-4)
“Settings” o “Phone Settings” tab o “Sound Settings”
Volume
“Settings” o “Phone Settings” tab o “Sound Settings”
1. Select “Volume”.
2. Select “For Incoming Call”, “For New Message”, “Java
Start”, “Delivery Report” or “General Volume”.
3. Press a (or d) to increase the ringer volume or press b
(or c) to decrease the ringer volume and then press B.
To select “Silent”, press b (or c) at level 1.
Assigning a Ringtone for an Incoming Call
“Settings” o “Phone Settings” tab o “Sound Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For Voice Call”.
3. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or
“Flash®”.
4. Highlight the ringtone you wish to use.
To hear the demo play, press [Play].
5. Press B.
Note
• Melodies can be selected from “Sound Gallery”, “Preset Sounds”
or “Flash®”.
Assigning a Ring Video Clip for an Incoming Call
“Settings” o “Phone Settings” tab o “Sound Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For Voice Call”.
3. Select “Video Gallery”.
4. Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select “Play”.
5. Press B.
Notification
“Settings” o “Phone Settings” tab o “Sound Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For New Message”, “Java Start” or “Delivery
Report”.
3. Select “Assign Tone”.
4. Select the desired folder.
5. Highlight the desired ringtone or ring video clip.
6. Press B.
7. Select “For New Message”, “Java Start” or “Delivery
Report”.
8. Select “Duration”.
9. Enter the desired duration of message notification in 2 digits
using the digit keys.
10. Press B.
Settings
97
Keypad Tones
“Settings” o “Phone Settings” tab o “Sound Settings” o
“System Sounds” o “Keypad Tones”
1. Select the desired tone pattern.
Warning Tone
“Settings” o“Phone Settings” tab o “Sound Settings” o
“System Sounds” o “Warning Tone”
1. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound Gallery”.
For “Duration”, select the desired time.
Power On/Off Sound
“Settings” o “Phone Settings” tab o “Sound Settings” o
“System Sounds”
1. Select “Power On Sound” or “Power Off Sound”.
2. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound Gallery”.
For “Duration”, enter the desired duration of sound in 2 digits
using the digit keys.
98
Settings
Handset Open/Close Sound
“Settings” o “Phone Settings” tab o “Sound Settings” o
“System Sounds”
1. Select “Handset Open” or “Handset Close”.
2. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound Gallery”.
For “Duration”, select the desired time.
Charge Full
“Settings” o “Phone Settings” tab o “Sound Settings” o
“System Sounds” o “Charge Full”
1. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound Gallery”.
For “Duration”, select the desired time.
Vibration (M 9-4-4)
“Settings” o “Phone Settings” tab o “Sound Settings” o
“Vibration”
1. Select “For Incoming Call”, “For New Message”, “Java
Start” or “Delivery Report”.
2. Select “Switch On/Off” and then select “On” or “Link to
Sound” to activate.
3. Select “Vibration Pattern” and then select the desired
vibration pattern.
Surround Sound (M 9-4-8)
“Settings” o “Phone Settings” tab o “Sound Settings” o
“Surround”
1. Select “On” or “Off”.
Date & Time (M 9-5)
“Settings” o “Phone Settings” tab o “Date & Time”
1. Select “Set Date/Time”.
2. Enter the day, month, year and time using the digit keys.
To Set Daylight Saving (M 9-5-2)
“Settings” o “Phone Settings” tab o “Date & Time” o
“Daylight Saving”
1. Select “On” or “Off”.
To Set the Time Zone
“Settings” o “Phone Settings” tab o “Date & Time” o
“Set Time Zone”
1. Press c or d to select the home city to set.
2. Press B.
3. Enter the time-zone differences using the digit keys.
Press a or b to switch between  and .
4. Press B.
World Clock (M 9-5-4)
For details, see page 85.
To Select the Time Format (M 9-5-5)
“Settings” o “Phone Settings” tab o “Date & Time” o
“Time Format”
1. Select “24 Hour” or “12 Hour”.
To Select the Date Format (M 9-5-6)
“Settings” o “Phone Settings” tab o “Date & Time” o
“Date Format”
1. Select from “D-M-Y”, “M-D-Y” or “Y-M-D”.
To Select the Calendar Format (M 9-5-7)
“Settings” o “Phone Settings” tab o “Date & Time” o
“Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
To Customise the Time Zone
“Settings” o “Phone Settings” tab o “Date & Time” o
“Set Time Zone”
1. Press [Custom].
2. Enter the city name.
Settings
99
Language Setting (M 9-6)
“Settings” o “Phone Settings” tab o “Language”
1. Select the desired language.
Note
• If you select “Automatic” in step 1, the language preset on the
SIM card is selected.
• If the language preset on the SIM card is not supported, then the
default language of the phone is selected.
Motion Control Settings (M 9-7)
To Set the Display Direction to Change Automatically when the
Phone is Closed (M 9-7-1)
“Settings” o “Phone Settings” tab o “Motion Control” o
“Display Change”
1. Select the desired option.
“Auto”:
Automatically changes the direction of the
screen according to the direction the phone is
rotated.
“Normal”:
Displays the vertical screen regardless of the
direction the phone is rotated.
100 Settings
To Set the Action (M 9-7-3)
“Settings” o “Phone Settings” tab o “Motion Control” o
“Action Settings”
1. Select the desired setting.
“Quick Silent”:
Enables switching to Quick Silent mode
when the phone is turned over.
“Music”:
Enables selecting a sound file by shaking
the phone sideways.
“Messaging”:
Enables changing the size of the text by
tilting the phone forward or backward.
“Browser”:
Enables zooming in or zooming out by
tilting the phone forward or backward.
“Document Viewer”: Enables switching the page by shaking
the phone sideways. Enables zooming in
or zooming out by tilting the phone
forward or backward.
“Image Viewer”:
Enables switching the image displayed by
shaking the phone sideways. Enables
zooming in or zooming out by tilting the
phone forward or backward.
“Back Tap”:
Enables ending an application by tapping
the back of the phone.
2. Select “On” or “Off”.
Setting the Sound Output (M 9-8)
“Settings” o “Phone Settings” tab o “Switch Ringtone
Output”
1. Select “Earphone only” or “Earphone + Speaker”.
Change Menu (M 9-10)
“Settings” o “Phone Settings” tab o “Change Menu”
1. Select “Standard Menu” or “Large Font Menu”.
Security Settings (M 9-11)
“Settings” o “Phone Settings” tab o “Security Settings”
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the PIN code each
time the phone is switched on. Your PIN code is registered on the
SIM card and you should have been made aware of the code when
you purchased the SIM card. Contact your service provider for
further details.
Select “On” for “PIN Entry” and enter your PIN code if you wish to
activate the PIN lock.
Note
• If you enter the wrong PIN code three times, the SIM card will
lock. To remove the lock, contact your service provider or SIM
card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on the SIM card.
Before you change the PIN code, select “On” for “PIN Entry”.
Enter the existing PIN code for “Change PIN” after selecting “PIN
Entry”, and enter a new PIN code twice.
To Change the PIN2 Code
PIN2 is a second PIN code used to unlock certain features of a SIM
card, such as Fixed Dialling and Call Cost metering. Not all SIM
cards use the PIN2 code. This menu may not be displayed
depending on the type of your SIM card.
Enter the existing PIN2 code for “Change PIN2”, and enter a new
PIN2 code twice.
Handset Lock
The Handset Lock prevents unauthorised use of the phone or
certain features on the phone when the power is turned on.
Select “On” for “Handset Lock” if you wish to activate the Handset
Lock.
Function Lock
By setting this option on, all the functions of your phone will be
locked until the correct handset code is entered.
Enter your handset code for “Function Lock” if you wish to activate
the Function Lock.
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function Lock off.
Settings 101
Phonebook Lock
The Phonebook Lock function prevents unauthorised use of your
Phonebook.
Select “On” to lock or “Off” to unlock for “Phonebook Lock” and
enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Change Handset Code”.
History Lock
The History Lock function prevents unauthorised access to Call Log.
By setting this option on, Call Log cannot be viewed until the correct
handset code is entered.
Press [Check] to lock or [Uncheck] to unlock.
Showing Secret Data
By setting this option on, the hidden data can be displayed.
Select “On” to display or “Off” to hide for “Show Secret Data”. Enter
your handset code when you select “On”.
The default handset code is “9999”. For details on changing the
handset code, see “Change Handset Code”.
Change Handset Code
The default handset code is “9999”.
Select “Change Handset Code” and enter the old handset code,
then enter a new handset code twice.
102 Settings
Slider Settings (M 9-12)
You can set the action when sliding open or sliding close your
phone.
“Settings” o “Phone Settings” tab o “Slider Settings”
To Set the Open Action for Calling
1. Select “Calls on Open” and select the desired option.
“On”:
Enables answering an incoming call by sliding
open the phone.
“Off”:
Disables answering an incoming call by sliding
open the phone.
To Set the Close Action for Calling
1. Select “Calls on Close” and select the desired option.
“Continue Call”: Disables terminating a call by sliding close the
phone.
“End Call”:
Enables terminating a call by sliding close the
phone.
To Set the Close Action for Locking
1. Select “Lock on Close” and select the desired option.
2. Select “No Action” or “Immediate”.
“No Action”:
Disables locking the phone by sliding it close.
“Immediate”: Enables locking the phone by sliding it close.
Master Reset
“Settings” o “Phone Settings” tab o “Master Reset” o
“Reset Settings”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
Note
• Some settings are not deleted by this function. Data stored in
Phonebook, etc. is not deleted.
To Reset All Settings for M1 to M12 and Delete All Created
Data (M 9-13-2)
“Settings” o “Phone Settings” tab o “Master Reset” o
“Reset All”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
Call Settings
Answer Phone (M 9-d-1)
When you cannot answer a call, you can record the caller’s
message on your phone. After the answering message is played
back, the caller can record a message. You can also use this
function to record the caller’s voice during a call.
“Settings” o “Call Settings” tab o “Answer Phone”
1. Select “Switch On/Off”.
2. Select “On” to enable this function.
3. Select one of the following options, if necessary.
“Answer Time”:
Sets the time before the answering
message is played back when this
function is enabled.
“Guidance Message”: The contents of the answering message
can be checked.
“Volume”:
Sets whether or not to play the caller’s
message while it is being recorded.
Note
• The Answer Phone function is not available when the power is
turned off or when the phone is outside the service area.
• Press F while receiving an incoming call to put the call on
hold.
Tip
• Long press U in standby to enable or disable the Answer
Phone function.
• During a call, press [Options] and select “Record” to record the
caller’s voice.
• You can enable Answer Phone for the profiles “Silent” and
“Original”.
• Answer Phone is always enabled for the “Car” profile.
Settings 103
Voicemail & Diverts (M 9-d-2)
This service can be used to divert incoming calls that you cannot
answer. Calls can be diverted to another phone number or to your
Voicemail system.
Note
• This service may not be available on all mobile phone networks.
Contact your service provider for more information.
To Access the Voicemail Centre
1. Long press G in standby.
To Activate the Voicemail Service
“Settings” o “Call Settings” tab o “Voicemail & Diverts”
o “Voicemail” o “Activate”
1. Select one of the following options:
“Always”:
Diverts all calls without ringing.
“When Busy”:
Diverts incoming calls while you are talking
on the phone.
“No Answer”:
Diverts incoming calls if you do not answer
a call within a certain period of time.
“Not Reachable”: Diverts incoming calls when your phone
has no network service or is switched off.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
2. Press B.
104 Settings
To Activate the Diverts Service
Select the appropriate option.
“Settings” o “Call Settings” tab o “Voicemail & Diverts”
o “Diverts”
1. Select the desired item.
2. Select from “Always”, “When Busy”, “No Answer” or “Not
Reachable”.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert calls or
search for it in the Phonebook (p. 39).
4. Press B.
Note
• When “Voice Calls” diverts are set to “Always”, “ ” is displayed
in standby.
To Deactivate the Diverts Service
Select the appropriate option.
“Settings” o “Call Settings” tab o “Voicemail & Diverts”
o “Deactivate”
1. Select from “Always”, “When Busy”, “No Answer” or “Not
Reachable”.
2. Press B.
To Cancel the Diverts and Voicemail Service
“Settings” o “Call Settings” tab o “Voicemail & Diverts”
o “Cancel All”
To Check the Diverts Status
“Settings” o “Call Settings” tab o “Voicemail & Diverts”
o “Status”
1. Select the diverts option you wish to check.
Showing Your Number (M 9-d-3)
“Settings” o “Call Settings” tab o “Show Your Number”
1. Select “On”, “Off” or “Status”.
Note
• Some networks do not support this service. Please check with
your service provider for availability.
Restrict Calls (M 9-d-4)
To activate this option you will need the specified password, which
is available from your service provider.
“Settings” o “Call Settings” tab o “Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”: Restricts outgoing calls.
“Incoming Calls”: Restricts incoming calls.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”: Restricts all outgoing calls except
emergency calls.
“Bar International Calls”: Restricts all outgoing international calls.
“Only Local & Home”: Restricts all outgoing international
calls except to your home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”: Restricts all incoming calls.
“Bar if Abroad”:
Restricts all incoming calls when you
are outside of the coverage from your
registered service provider.
3. Select one of the following options:
“All Services”:
Restricts all services.
“Voice Calls”:
Restricts all voice calls.
“Messages”:
Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
Settings 105
To Cancel Settings
“Settings” o “Call Settings” tab o “Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Fixed Dialling Numbers
This option is available on most SIM cards for mobile phones. It
allows you to configure a SIM card so that it can only be used to
make calls to numbers on a predefined list.
Note
• This service depends on the SIM card.
To Enable Fixed Dialling Numbers
“Settings” o “Call Settings” tab o “Restrict Calls” o
“FDN”
1. Select “Switch On/Off”.
2. Select “On” to enable this function.
3. Enter your PIN2 code.
To Add a New Name
“Settings” o “Call Settings” tab o “Restrict Calls” o
“FDN”
1. Select “Edit Dial List”.
2. Select a blank field.
3. Enter your PIN2 code.
106 Settings
4. Add a name and a phone number.
For details on adding a name and phone number, see
“Adding a New Entry” on page 39.
5. Press [Save].
Rejecting an Incoming Call
To Reject the Registered Number
“Settings” o “Call Settings” tab o “Restrict Calls” o
“Rejected Numbers” o“Switch On/Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings” o “Call Settings” tab o “Restrict Calls” o
“Rejected Numbers” o“Set Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Rejecting a Call when the Caller’s Number is Withheld
“Settings” o “Call Settings” tab o “Restrict Calls” o
“Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings” o “Call Settings” tab o “Restrict Calls” o
“Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to enter the
password again.
4. Press B.
Minute Minder (M 9-d-5)
“Settings” o “Call Settings” tab o “Minute Minder”
1. Select “On” or “Off”.
Auto Answer (M 9-d-6)
“Settings” o “Call Settings” tab o “Auto Answer”
1. Enter your handset code.
2. Select “Switch On/Off”.
3. Select “On” or “Off”.
To Set the Answer Time
“Settings” o “Call Settings” tab o “Auto Answer”
1. Enter your handset code.
2. Select “Answer Time”.
3. Enter the time from 1 to 30 seconds.
Call Waiting (M 9-d-7)
Note
• This service may not be available on all mobile phone networks.
Contact your service provider for more information.
If you wish to be able to receive another incoming call while you
have a call in progress, you must activate the Call Waiting service.
“Settings” o “Call Settings” tab o “Call Waiting”
1. Select “On”, “Off” or “Status”.
Display Call Timer (M 9-d-8)
“Settings” o “Call Settings” tab o “Display Call Timer”
1. Select “On” or “Off”.
Display Call Cost (M 9-d-9)
“Settings” o “Call Settings” tab o “Display Call Cost”
1. Select “On” or “Off”.
Auto Redial (M 9-d-10)
“Settings” o “Call Settings” tab o “Auto Redial”
1. Select “On” or “Off”.
Settings 107
Network Settings
Network Settings (M 9-d-d-1)
To Select a Network Automatically
“Settings” o “Network Settings” tab o “Network
Settings” o “Select Network” o “Automatic”
To Select the Network Manually
“Settings” o “Network Settings” tab o “Network
Settings” o “Select Network” o “Manual”
1. Select the desired network.
To Add a New Network
“Settings” o “Network Settings” tab o “Network
Settings” o “Select Network” o“Add New Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
108 Settings
Showing the Network Information (M 9-d-d-1-2)
“Settings” o “Network Settings” tab o “Network
Settings” o “Network Information”
Information about the operator is displayed.
Off Line Mode (M 9-d-d-2)
“Settings” o “Network Settings” tab o “Off Line Mode”
1. Select “On” or “Off”.
Internet Settings (M 9-d-d-3)
Note
• In normal operations, you do not need to change the settings.
• Internet settings have already been entered in your phone
depending on your service provider. You may have restrictions on
viewing, deleting, copying or modifying the settings. Contact your
service provider for details.
Browser Settings (M 9-d-d-3-1)
“Settings” o “Network Settings” tab o “Internet
Settings” o “Browser Settings” o “Create New”
“Profile Name”:
Browser profile name (unique name)
“Proxy”:
Proxy setting for Browser
(When “Use Proxy” is set to “Off”, settings for “Home” and
“Access Point” can be made in place of “Proxy”.)
“Use Proxy”:
Setting to connect by Proxy or not
Java™ Settings (M 9-d-d-3-2)
“Settings” o “Network Settings” tab o “Internet
Settings” o “Java™ Settings” o “Create New”
“Profile Name”:
Profile name for Java™ application
(unique name)
“Proxy”:
Proxy setting for Java™ application
(When “Use Proxy” is set to “Off”, settings for “Access Point”
can be made in place of “Proxy”.)
Setting to connect by Proxy or not
“Use Proxy”:
Streaming Settings (M 9-d-d-3-3)
“Settings” o “Network Settings” tab o“Internet
Settings” o “Streaming Settings” o “Create New”
“Profile Name”:
Profile name for streaming (unique
name)
“Proxy Address”:
Proxy address
“Proxy Port Number”: Port number (1-65535)
“Access Point”:
Access point
Proxy Settings (M 9-d-d-3-4)
“Settings” o “Network Settings” tab o “Internet
Settings” o “Proxy Settings” o “Create New”
“Proxy Name”:
Proxy name (unique name)
“Proxy Address”:
IP address
“Access Point”:
Access point
“Home”:
“Port Number”:
“Authentication Type”:
“User Name”:
“Password”:
Home page URL
Port number (1-65535)
Authentication type (“HTTP-BASIC” or
“HTTP-DIGEST”)
User name for authentication
Password for authentication
Access Point Settings (M 9-d-d-3-5)
“Settings” o “Network Settings” tab o “Internet
Settings” o “Access Point Settings” o “Create New”
“Access Point Name”: Access point name (unique name)
“Bearer Type”:
Sets the connection type (“GPRS”,
“CSD”)
“APN”/”Dialup Number”:
APN setting/CSD connection number
setting
“Authentication Type”: Authentication type (“NONE”, “PAP” or
“CHAP”)
“User Name”:
User name for access point
“Password”:
Password for access point
“DNS”:
DNS (Domain Name System)
“Linger Time”:
Linger Time (1-99999 sec.)
“Data Call Type”:
Analog or ISDN
“Data Speed”:
9.6kbits, 14.4kbits
Settings 109
Clearing DNS Cache (M 9-d-d-3-6)
“Settings” o “Network Settings” tab o “Internet
Settings” o “Clear DNS Cache”
To Activate the Browser/Java™/Streaming Profile
“Settings” o “Network Settings” tab o “Internet
Settings”
1. Select “Browser Settings”, “Java™ Settings” or “Streaming
Settings”.
2. Select the desired profile you wish to activate.
To Edit/View/Copy/Delete the Browser/Java™/Streaming/
Proxy/Access Point Profile
“Settings” o “Network Settings” tab o “Internet
Settings”
1. Select “Browser Settings”, “Java™ Settings”, “Streaming
Settings”, “Proxy Settings” or “Access Point Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”:
Modify the desired item.
“View”:
Confirm the data.
“Copy”:
Enter the new file name.
“Delete”:
Select “Yes” to delete.
110 Settings
Call Log (M 11)
The phone will record the last 30 missed calls, received calls and
dialled numbers.
Viewing Call Log
“Call Log”
1. Select from “All Calls”, “Dialled Numbers”, “Missed Calls”
or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D to make a voice call.
Sending Messages
1. In the call log list, highlight the phone number or name you
wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a New
Message” on page 55.
Deleting a Call Log
1. In the call log list, press [Options] and select “Delete” or
“Delete All”.
Call Timers (M 11-5)
Checking the Duration of the Last Call and All Calls
“Call Log” o “Call Timers”
1. Select “Dialled Calls” or “Received Calls”.
Resetting Call Timers (M 11-5-3)
“Call Log” o “Call Timers” o “Clear Timers”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
Call Costs (M 11-6)
Some networks do not support Charging Advice. Please check with
your service provider for availability.
Checking the Cost of the Last Call (M 11-6-1)
“Call Log” o “Call Costs” o “Last Call”
Checking the Total Call Cost (M 11-6-2)
“Call Log” o “Call Costs” o “All Calls”
Setting the Charge Rate
“Call Log” o “Call Costs” o “Cost Units” o “Set Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit
“Call Log” o “Call Costs” o “Max Cost” o “Set Limit”
1. Enter your PIN2 code.
2. Enter a value.
Call Log 111
Checking the Residual Credit (M 11-6-3)
“Call Log” o “Call Costs” o “Residual Credit”
Resetting All Call Costs (M 11-6-4)
“Call Log” o “Call Costs” o “Clear Costs”
1. Enter your PIN2 code.
Data Counter (M 11-7)
“Call Log” o “Data Counter”
1. Select “Last Data” or “All Data”.
Resetting All Data Counter (M 11-7-3)
“Call Log” o “Data Counter” o “Clear Counter”
112 Call Log
Connectivity (M 12)
Bluetooth (M 12-1)
Keep your phone within a distance of 10 metres from the other
Bluetooth wireless technology enabled device before searching.
Using the Bluetooth Wireless Function
To Turn On or Off the Bluetooth Wireless Function (M 12-1-1)
“Connectivity” o “Bluetooth” o “Switch On/Off”
1. Select “On” or “Off”.
When “On” is selected, the Bluetooth wireless setting is
activated, and “ ” is displayed.
• In order to pair two devices with Bluetooth wireless technology,
the users should agree on the same passcode for both devices.
• The passcode is used only once, so there is no need to
remember it. The passcode can be different each time the
devices are connected.
• Devices that do not have a user interface (i.e., headsets and car
kits) have a factory-set passcode. See the user guide for the
device.
To Activate the Paired Device
“Connectivity” o “Bluetooth” o “Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
To Search for Devices to be Paired (M 12-1-2)
A maximum of 16 devices can be searched for.
“Connectivity” o “Bluetooth” o “Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
To Check the Paired Handsfree Devices
“Connectivity” o “Bluetooth” o “Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Highlight the desired handsfree device.
3. Press [Options] and select “Set to Prior Connect”.
Note
• You can search for devices even when the Bluetooth wireless
function is off. Once pairing is started, the phone turns the
Bluetooth wireless function on automatically.
• You can only select one device for pairing. To change the paired
device, see “To Activate the Paired Device”.
• Pairing means authentication has been established between the
two devices.
To Check the Audio Device
“Connectivity” o “Bluetooth” o “Paired Devices”
1. Press d twice to switch to the list for audio devices.
2. Highlight the desired audio device.
3. Press [Options] and select “Set to Prior Connect”.
Connectivity 113
To Rename or Delete the Paired Devices
“Connectivity” o “Bluetooth” o “Paired Devices”
1. Press c or d to switch between all paired devices and
handsfree devices.
2. Highlight the desired device.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing B after selecting
desired device.
To Send All Data to Other Devices (M 12-1-4)
“Connectivity” o “Bluetooth” o “Send All”
1. Select the desired device.
If a device is not specified, searching starts automatically.
2. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
• If the handsfree device is connected, the confirmation screen to
deactivate the handsfree function is displayed. Select “Yes” to
deactivate.
114 Connectivity
Bluetooth Wireless Settings (M 12-1-5)
To Rename Your Phone
“Connectivity” o “Bluetooth” o “Bluetooth Settings” o
“Device Name”
1. Enter the new device name.
To Show or Hide Your Phone
“Connectivity” o “Bluetooth” o “Bluetooth Settings” o
“Visibility”
1. Select the desired visibility settings.
“Show My Phone”: Allows other devices to recognise your
phone.
“Hide My Phone”: Hides your phone from other devices.
To Select the Sound Output
“Connectivity” o “Bluetooth” o “Bluetooth Settings” o
“Sound Output”
1. Select “Phone/Earphone” or “Bluetooth Device”.
To Switch the Handsfree Settings
“Connectivity” o “Bluetooth” o “Bluetooth Settings” o
“Handsfree Setting”
1. Select “Handsfree Mode” or “Private Mode”.
“Handsfree Mode”:
For talking with the handsfree kit
“Private Mode”:
For talking with the phone
To Set Java™ Application Request
“Connectivity” o “Bluetooth” o “Bluetooth Settings” o
“Java™ Application Request”
1. Select “On” or “Off”.
To Turn Off Automatically
“Connectivity” o “Bluetooth” o “Bluetooth Settings” o
“Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically after the
specified time.
To See Your Phone Details
“Connectivity” o “Bluetooth” o “My Phone Details”
Infrared (M 12-2)
Keep your phone within a distance of 20 centimetres from the other
infrared enabled device before searching. The infrared setting will
return to off when no data is transmitted/received via infrared
communication.
Infrared communication is only available when the phone is open.
Turning On or Off
“Connectivity” o “Infrared” o “Switch On/Off”
1. Select “On(3 min)” or “Off”.
The infrared setting is activated, and “ ” is displayed.
Sending All Data
“Connectivity” o “Infrared” o “Send All”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
2. Select the desired data to send.
3. Enter the authorisation code.
Mass Storage (M 12-3)
“Connectivity” o “Mass Storage”
1. Select “Yes”.
Note
• Activating Mass Storage mode also activates offline mode.
• Mass Storage is not available when the battery is low, a Java™
application is paused, music player is active, or a memory card
is not inserted in your phone.
USB Charge (M 12-4)
“Connectivity” o “USB Charge”
1. Select “Enable” or “Disable”.
Note
• The battery can be charged with the AC charger regardless of
this setting.
Connectivity 115
Card Settings (M 12-5)
Formatting Memory Card (M 12-5-2)
“Connectivity” o “Card Settings” o “Format Card”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
2. Select “Yes” to start formatting.
Making a Backup File
With a memory card inserted in your phone, you can back up data
in Messages (Inbox, Drafts, Sent Messages), Call Manager,
Message Groups, Calendar, Tasks, Text, and Bookmarks in the
handset memory to the memory card. You can also restore the
backup data from the memory card.
“Connectivity” o “Card Settings” o “Backup/Restore” o
“Backup”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
2. Check off the desired items to back up and press [Execute].
To back up all files, press [Options] and select “Check All” to
check off all items. Then press [Execute].
116 Connectivity
Restoring a Backup File
“Connectivity” o “Card Settings” o “Backup/Restore” o
“Restore”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 102.
2. Check off the desired items to restore and press [OK].
To restore all files, press [Options] and select “Check All” to
check off all items. Then press [OK].
3. Select the desired file to restore and press [OK].
A confirmation message indicating deletion from the handset
memory is displayed.
4. Select “Yes” to start restoring.
Deleting a Backup File
“Connectivity” o “Card Settings” o “Backup/Restore” o
“File Management”
1. Select the desired folder.
2. Check off the desired files to delete and press [Delete].
To delete all backup files, press [Options] and select “Check
All” to check off all files. Then press [Delete].
3. Select “Yes” to start deleting.
Connecting SH8010C to Your PC
You can use the following functions by connecting the SH8010C to
your PC using a USB data cable or via Bluetooth wireless
technology:
• GSM/GPRS modem
• Handset Manager for SH8010C
• Music Manager for SH8010C
• Sync Manager for SH8010C
Note
• Operation with software not provided by Sharp is not guaranteed.
System Requirements
Operating System:
Windows 2000*, Windows XP**, Windows Vista
* Service Pack 4 or later
** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
USB port or Bluetooth wireless port
CD-ROM drive
To use Music Manager, DirectX9 and Windows Media Player 9 or
later are required.
GSM/GPRS Modem
You can use SH8010C as a GSM/GPRS modem to access the
Internet from your PC. Connect your phone to your PC via Bluetooth
wireless technology or USB interface. Software installation on your
PC is required.
Modem via the USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SH8010C CD-ROM screen is displayed.
If the SH8010C CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select the USB driver from the on-screen instructions of
your CD-ROM, and start installation of USB driver software
following the on-screen instructions of your CD-ROM.
• During installation, the on-screen instructions ask you to
connect your phone to your PC. Power on your phone and
attach the phone to the USB port of your PC using the USB
data cable.
3. Follow the on-screen instructions to complete installation.
4. Select the modem driver from the on-screen instructions of
your CD-ROM, and install modem driver software following
the on-screen instructions of your CD-ROM.
5. Follow the on-screen instructions to use your phone as a
modem driver.
• When the on-screen instructions ask for the modem driver
type, select the cable as a modem driver.
Connecting SH8010C to Your PC 117
Modem via Bluetooth Connection
1. Turn on the Bluetooth wireless function of your phone.
For details, see “To Turn On or Off the Bluetooth Wireless
Function” on page 113.
2. Pair your PC with your phone.
For details on pairing your PC with your phone, see “To Search
for Devices to be Paired” on page 113.
3. Insert the CD-ROM into your PC’s CD-ROM drive.
The SH8010C CD-ROM screen is displayed.
If the SH8010C CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
4. Select the modem driver from the on-screen instructions of
your CD-ROM, and install modem driver software following
the on-screen instructions of your CD-ROM.
5. Follow the on-screen instructions to use your phone as a
modem driver.
• When the on-screen instructions ask for the modem driver
type, select Bluetooth as a modem driver.
Note
• Modem communication is not possible while communicating
with the Handset Manager via Bluetooth wireless technology or
USB interface.
• It is not recommended that you make or answer calls when you
are using SH8010C as a GSM/GPRS modem. The operation may
be interrupted.
118 Connecting SH8010C to Your PC
• Your phone exhausts the battery when connected to a PC, even
when not communicating.
• For a detailed explanation on how to use the Modem driver,
please click and refer to the help on the Modem Driver.
Handset Manager
You can transmit the following items between your phone and your
PC, and can use Phonebook entries on your PC:
• Gallery files (pictures/sounds/video clips/themes/Flash® data/
Other Documents data)
• Phonebook entries
• Schedule entries
Via USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SH8010C CD-ROM screen is displayed.
If the SH8010C CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen instructions of
your CD-ROM, and start installation of Handset Manager
software following the on-screen instructions of your
CD-ROM.
• If you have not installed the USB driver, follow steps 2 and 3
on page 117.
3. Follow the on-screen instructions to complete installation.
• During installation, the on-screen instructions ask you to
select an interface. Select the USB data cable as an
interface.
4. Connect your phone to your PC. Power on your phone and
attach the phone to the USB port of your PC using the USB
data cable.
5. Launch Handset Manager from the relevant folder.
6. Enter your handset code.
7. Follow the on-screen instructions of Handset Manager.
Via Bluetooth
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SH8010C CD-ROM screen is displayed.
If the SH8010C CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen instructions of
your CD-ROM, and start installation of Handset Manager
software following the on-screen instructions of your
CD-ROM.
3. Follow the on-screen instructions to complete installation.
• During installation, the on-screen instructions ask you to
select an interface. Select Bluetooth as an interface.
4. Launch Handset Manager from the relevant folder.
5. Enter your handset code.
6. Follow the on-screen instructions of Handset Manager.
Note
• Some large files may not be able to be transmitted from the PC
to the phone.
• Applications (Camera, Gallery, etc.) cannot be run when the
phone is connected to the PC via Bluetooth wireless technology
interface or USB data cable.
• If you have already installed Sharp Handset Manager, you need
to uninstall the previous one.
• If you have trouble with installation, uninstall Handset Manager,
restart your PC, reinstall Handset Manager and restart.
• For details, see the User Guide Software which is installed within
Handset Manager or our web-site,
http://www.sharp-mobile.com.
Music Manager
You can manage the playlist and exchange sound files on your PC.
Available files are the sound files in the following formats: MP3,
AAC, 3GPP.
Connecting SH8010C to Your PC 119
Main Control Panel
Play
Previous
Next
Add Playlist
Add Smart Playlist
Remove Playlist
Search Media File
Browse
Input Window
Media Management
in PC
Media Management
in Handset
Main Control Panel
Control all the main actions from here.
Play:
Plays back a file.
Previous:
Returns to the top portion of the current file.
Next:
Jumps to the next file.
Search Media File: Searches a media file.
Browse:
Browses all the media files sorted in Genre/
Artist/Album.
Input Window:
Quickly finds the media files in Library or
the playlist with keyword entry.
120 Connecting SH8010C to Your PC
Media Management in PC
Media files in PC can be easily explored in 2 main columns.
Add Playlist:
Creates a new playlist.
Add Smart Playlist: Creates a new smart playlist.
Remove Playlist:
Removes a playlist.
Media Management in Handset
Media files in Handset can be easily explored in 2 main
columns.
• With the drag and drop operation, you can upload the sound files
and the playlists from your PC, and also download them to your
PC.
• You can create a new playlist and delete an existing playlist.
• With the drag and drop operation, you can add a sound file to a
playlist, and delete them from the playlist.
• You can edit the name of a playlist of your PC.
• You can edit the title, artist name, and album name of sound files
of your PC (only available in MP3 format).
Sync Manager
You can synchronise the following data with the data of Microsoft
Outlook or Outlook Express on your PC.
• Phonebook entries.
• Schedule entries.
Connecting SH8010C to Your PC 121
Specifications
Memory Card Structure and Contents
Memory Card Structure
My Items
PRIVATE
SD_VIDEO
SH_ITEMS
PRL001
Location for Saved Data/Data Used on the Phone
Bookmarks
Backup data for “Bookmarks” in “Browser”(*1)
FlashÂŽ
Data displayed in “Flash®” in “Gallery”
Other Documents
Files displayed in “Other Documents” in “Gallery”
Pictures
Images displayed in “Picture Gallery” in “Gallery”
Sounds & Ringtones
Sound files played back in “Sound Gallery” in “Gallery”
Themes
Files set in “Themes” in “Gallery”
Videos
Videos played back in “Video Gallery” in “Gallery”
SH_Folder
Application management information, etc.(*1)
Utility
Saved backup files, etc.(*1)
Video files played back in “SD VIDEO” in “Gallery”
Note
• Depending on the size and type of data, playback/viewing may not be available.
• Java™ data cannot be saved on a memory card.
• Do not save data to folders in the memory card other than those listed above.
• When a memory card is inserted into the phone, “Temp Card Folder” is additionally displayed below “Other Documents” in “Gallery”. In
“Temp Card Folder”, the data saved in the root directory in the memory card is displayed.
(*1) These are dedicated folders for backup data.
122 Specifications
Safety Precautions and Conditions of
Use
• Observe the rules concerning the use of mobile phones at
gasoline stations, chemical plants and at all sites where a risk of
explosion exists.
Your phone conforms to international regulations insofar as it is
used under normal conditions and in accordance with the following
instructions.
Caring for your phone
• Do not allow children to use your phone without supervision.
• Do not open or attempt to repair your phone yourself. The
product can only be repaired by authorised service personnel.
• Do not drop your phone or subject it to severe impacts. Bending
the body and pushing the display or keys with extreme force
could damage the phone.
• Do not use solvents to clean your phone. Use only a soft, dry
cloth.
• Do not carry your phone in your back pocket as it could break
when you sit down. The display is made of glass and is
particularly fragile.
• Avoid touching the external connector on the underside of the
phone, since the delicate components within can be damaged by
static electricity.
Conditions of Use
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as your phone
may interfere with the aircraft’s electronic systems). Current
legislation forbids this use and legal action can be taken against
the user.
• Do not switch on your phone in a hospital, except in designated
areas.
• Use of your phone’s function may affect the performance of
medical electronic units (pacemakers, hearing aids, insulin
pumps, etc.). When the phone function is on, do not bring it near
medical equipment or into areas in which medical equipment is
being used. If you have a hearing aid or a pacemaker, only use
the phone on the opposite side of your body from where it is
located. The phone should be kept at least 6 inches (15.24 cm)
from a pacemaker ANYTIME the phone is switched on.
• Do not switch on your phone near gas or flammable substances.
Safety Precautions and Conditions of Use 123
Mobile Light
Do not use Mobile Light near people’s faces.
Eyesight may be temporarily affected leading to accidents.
CAUTION
Use of controls, adjustments or performance of
procedure other than those specified herein may
result in hazardous radiation exposure. As the
emission level from Mobile Light LED used in
this product is harmful to the eyes, do not
attempt to disassemble the cabinet. Servicing is
limited to qualified servicing station only.
GB7247.1-2001
1!ಢ!LED!‫ޘ‬ອ
EN60825-1:1994 A1:2002 & A2:2001
CLASS 1
LED Product
Mobile Light
ᓖፀ!2!ಢ
ࡌఎဟᎌ!MFE!६࿴
ᇖᒇ၁਒ၦ
EN60825-1:1994 A1:2002 & A2:2001
(European Standard)
CAUTION-CLASS 1M
LED RADIATION WHEN OPEN
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
124 Safety Precautions and Conditions of Use
Mobile Light LED Properties
a) Emission Duration: Continuous
b) Wavelength
White: 400-700 nm
c) Maximum Emission Output
White: 105 ÎźW (1.5 mW inside handset)
Battery
• Use your phone only with batteries, chargers and accessories
recommended by the manufacturer. The manufacturer disclaims
any liability for damage caused by the use of other chargers,
batteries or accessories.
• Network configuration and phone usage will affect
talk-time and standby time.
Using the games or camera will hasten battery consumption.
• When the battery charging alert is displayed on the
screen, charge the battery as soon as possible. If you
continue using your phone ignoring the alert, the phone may
cease to function, and all data and settings you have stored may
be lost at any moment.
• Before removing the battery from the phone, make sure the
phone is switched off.
• Replace and charge the new battery as soon as possible after
removing the old one.
• Do not touch the battery terminals. Batteries can cause damage,
injury or burns if a conductive material touches exposed
terminals. When the battery is detached from the phone, use a
cover made of non-conductive material for keeping and carrying
the battery safely.
• Recommended temperature for using and storing batteries is
approximately 20qC.
• The batteries’ performance is limited in low temperatures,
particularly below 0qC and the phone may not work temporarily
regardless of the amount of remaining battery power.
• Exposing the phone to extreme temperatures will shorten battery
life.
• The battery can be charged and discharged hundreds of times
but it will eventually wear out. When the operating time (talk-time
and standby time) is noticeably shorter than normal, it is time to
buy a new battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE, DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
See “Battery Disposal” on page 14.
Aerial Care
• Do not cover the bottom area of the phone (p. 13, No. 29) with
your hand when in use as this may interfere with the
performance of the built-in aerial. Call quality may deteriorate
leading to shortened talk-time and standby time because the
mobile phone has to operate on a higher power level than is
necessary.
• Use only the aerial supplied or one approved by Sharp for your
mobile phone. Using unauthorised or modified aerials may
damage the mobile phone. Moreover, since the mobile phone
may violate the appropriate regulations, it may lose performance
or exceed the limitation of SAR levels.
• To avoid impaired performance, do not damage the aerial of the
mobile phone.
• To avoid interfering with blasting operations, please turn off the
mobile phone in a blasting area or in a place where a “turn off
two-way radio” sign is posted.
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking pictures.
If the phone moves while taking a picture, the picture can become
blurred. When taking a picture, hold the phone firmly to prevent
it from moving, or use the delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear focusing.
Wipe them off with a soft cloth before taking a picture.
Safety Precautions and Conditions of Use 125
Others
• As with any electronic storage unit, data may be lost or corrupted
under various circumstances.
• Before connecting the phone with a PC or a peripheral unit, read
the operation manual for the other unit carefully.
• If the phone’s battery has been removed for some time, or the
phone has been reset, the unit’s clock and calendar may be
reinitialised. The date and time should be updated in this case.
Environment
• Keep your phone away from extreme heat. Do not leave it on the
dashboard of a car or near a heater. Do not leave it in any place
that is extremely damp or dusty.
• Since this product is not waterproof, do not use it or store it
where fluids such as water can splash onto it. Raindrops, water
spray, juice, coffee, steam, perspiration, etc. will also cause
malfunctions.
126 Safety Precautions and Conditions of Use
Precautions Concerning Vehicle Use
• It is the user’s responsibility to check the local laws governing the
use of a mobile phone in vehicles. Pay full attention to driving.
Pull off to the side of the road, park the car, and switch off the
engine before making or answering a call.
• Use of your phone’s function may interfere with the vehicle’s
electronic systems, such as the ABS anti-lock brakes or the
air-bag. To ensure no such problem occurs, please check with
your dealer or car manufacturer before connecting your phone.
• The phone uses a magnet to recognise that the phone is closed.
Do not place magnetic cards near your phone or get the card
caught in the phone as it may damage the recorded data.
• Only allow qualified service maintenance personnel to install the
vehicle accessories.
The manufacturer disclaims any liability for damage which may
result as a consequence of improper use or use contrary to the
instructions contained herein.
0.315


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:07:16 17:10:28+09:00
Modify Date                     : 2008:07:25 10:03:32+09:00
Metadata Date                   : 2008:07:25 10:03:32+09:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:4D42269D0E53DD11A21BCA624CE100F6
Instance ID                     : uuid:9ed1000b-9391-4001-8633-f354c776278c
Derived From Instance ID        : uuid:78b72c97-c3db-407f-b64f-e7c0e356b315
Derived From Document ID        : uuid:3100c144-a85e-441a-974d-87909bb552e2
Format                          : application/pdf
Creator                         : S108248
Title                           : 080716_sh8010c_e.pdf
Has XFA                         : No
Page Count                      : 133
Author                          : S108248

EXIF Metadata provided by EXIF.tools