Sharp HRO00195 Cellular Phone User Manual

Sharp Corporation Cellular Phone

user manual

4-304 Quick TipsBefore Using HandsetCharge handset before powering on for the fi rst time (not adequately charged at time of purchase). .Handset may not power on when charge is low. .If handset does not power on even after charging, contact WILLCOM Service Center or Sharp Customer Assistance Center.Accessories .SD/USIM Card Insertion/Removal Tool (complimentary sample) .microSD Card (complimentary sample, preinstalled)(Battery is built into handset; handset back cover is not removable.)ChargingAC Charger is not included in the package; purchase WILLCOM AC Charger 01 (AC01-MU-K) separately. .AC Charger is not water proof. Never charge handset while it is wet; may cause electric shock, or fi re, malfunction, burns, etc. due to short-circuiting. .Handset/AC Charger may become warm while charging.External Device PortNotification LampAC 100 V OutletAC ChargerBladesMicro USB Plug1Insert Micro USB plug into External Device PortMicro USB PlugExternal Device Port .Insert Micro USB plug in correct orientation; otherwise, External Device Port may be damaged. Confi rm contours and orientation of Micro USB plug before inserting it.
4-3142Rotate blades out as shown, then plug AC Charger into AC outlet .Notifi cation Lamp illuminates while charging. .Notifi cation Lamp goes out when charge is full.3Unplug AC Charger and retract blades4Remove Micro USB plug from External Device PortHandset KeysActivate/cancel Screen lock. Long Press for power on or phone options.Decrease Volume. Increase Volume. Return to each sheet. Long Press to activate Camera.Navigation BarReturn to previous screen.Return to each sheet.Open Options menu.Open application usage history.
4-324Quick Tips (Continued)Basic OperationsPower On/Off ■Power On (Long Press)After Powering On for the First Time利用する Z Drag down Z Z Change interface to English (See "English Interface" below)Unlocking TouchscreenDrag down.Screen LockAfter a period of inactivity or Pressing , Display goes completely dark and Screen lock activates. To cancel, Press ; lock screen appears. ■Power Off (Long Press) Z Power off Z OKEnglish InterfaceIn application sheet, (設定) Z その他の設定 Z 言語と文字入力 Z 言語 (Language) を選択 Z EnglishMy Phone NumberIn application sheet, (Settings) Z Profi leGeneral NotesHandsetDo not disassemble or modify handset. Electromagnetic Safety in EuropeFor body-worn operation, this mobile phone has been tested and meets RF exposure guidelines when used with an accessory containing no metal and positioning the handset a minimum 15 mm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines.CE Declaration of ConformityHereby, Sharp Telecommunications of Europe Ltd, declaresthat WX04SH is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.A copy of the original declaration of conformity for each model can be found at the following Internet address:http://www.sharp.co.jp/k-tai/
4-334 ■Battery CautionsUse specifi ed AC Charger only.Non-specifi ed equipment use may cause Internal Battery to leak, overheat, burst or ignite, and may cause AC Charger to overheat, ignite, malfunction, etc.Battery is built into handset. Do not dispose of handset with ordinary refuse; take it to a WILLCOM Plaza/WILLCOM Counter for appropriate disposal.Charge handset in ambient temperature 5oC - 35oC; Internal Battery may leak/overheat and performance may deteriorate outside this range. ■Mobile LightDo not shine Mobile Light in eyes.May temporarily aff ect eyesight or startle, leading to accidents. ■European RF Exposure InformationYour mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientifi c organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The guidelines use a unit of measurement known as the Specifi c Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device when tested at the ear was 0.528 W/kg*. As mobile devices off er a range of functions, they can be used in other positions, such as on the body as described in this User Guide**. In this case, the highest tested SAR value is 0.275 W/kg***. As SAR is measured utilizing the device's highest transmitting power the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network.The World Health Organization has stated that present scientifi c information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a hands-free device to keep the mobile phone away from the head and body.*The tests are carried out in accordance with international guidelines for testing.**Please see "Electromagnetic Safety in Europe" on P.4-32 for important notes regarding body-worn operation.***A method of measuring SAR when a mobile phone is used at positions other than at the ear was established in March 2010 through an international standard (IEC62209-2). MIC technical regulation was reported in
4-344Quick Tips (Continued)October 2011 by the Information and Communications Council.World Health Organizationhttp://www.who.int/emf ■Headphone Signal LevelThe maximum output voltage for Music Player function, measured in accordance with EN 50332-2, is 12.0 mV.FCC Notice .This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. .Changes or modifi cations not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. ■FCC Information to UserThis equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient/relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help. ■FCC RF Exposure InformationYour handset is a radio transmitter and receiver.It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.The guidelines are based on standards that were developed by independent scientifi c organization through periodic and thorough evaluation of scientifi c studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless handsets employs a
4-354unit of measurement known as the Specifi c Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. worn on the body) as required by the FCC for each model.The highest SAR value for this model handset as reported to the FCC when worn on the body in a holder or carry case, is ＜0.10 W/kg.Body-worn Operation; This device was tested for typical body-worn operations with the back of the handset kept 15 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 15 mm separation distance between the user's body and the back of the handset. The use of beltclips, holsters and similar accessories should not contain metallic components in its assembly.The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on fi le with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/ after searching on FCC ID APYHRO00195.Additional information on Specifi c Absorption Rates (SAR) can be found on the FCC website athttp://transition.fcc.gov/oet/rfsafety/.
4-364Quick Tips (Continued)◆Handset Operations◆ ■Sharp Corporation Customer Assistance Center0120-606-512*May not be accessible from some IP phones.Business hours: 9:00 AM to 6:00 PM, Monday through Friday (Excluding national holidays, New Year holidays and other company holidays)◆Repairs of Handsets & Optional Accessories◆ ■Sharp Corporation Communication Systems Group Mobile Telecommunication Services Business Promotion Center Repair Service Promotion Dept. Kinki Center 2 (PHS)0570-081010*Flat rate from anywhere in Japan.*From an IP/PHS phone, dial 06-6794-9708.Business hours: 9:00 AM to 5:40 PM, Monday through Friday (Excluding national holidays, New Year holidays and other company holidays) Address: 3-1-72 Kita Kamei-cho, Yao-shi, Osaka◆WILLCOM Services◆ ■WILLCOM Service Center●General InformationFrom a WILLCOM handset, dial at 151 (charges apply)*"Dare To Demo Teigaku" free call plan applies.From another carrier's mobile phone, landline, etc., dial at 0570-039-151 (charges apply) Operators available 9:00 AM to 8:00 PM, 7 days a week●ServicesFrom a WILLCOM handset, dial toll free at 116From another carrier's mobile phone, landline, etc., dial toll free at 0120-921-156 Automated voice response system available 24 hours a day, 7 days a weekCharges may apply if operator assistance is required for the service. Customer Service

Navigation menu