Sharp HRO00201 GSM/GPRS 850/1900, WCDMA/HSPA FDD V, BT/BLE, 802.11 a/b/g/n/ac, NFC, GPS Wireless Handheld User Manual II

Sharp Corporation GSM/GPRS 850/1900, WCDMA/HSPA FDD V, BT/BLE, 802.11 a/b/g/n/ac, NFC, GPS Wireless Handheld II

UserManual.wiki >

HRO00201 User Manual >

Contents

1. User Manual
2. User Manual II

User Manual II

~~~~shl24_e_00_hyo1.fm[0/0]Be sure to read this manual before useNotes on Usage• In this manual, the “AQUOS PHONE SERIE mini SHL24” is abbreviated as the “SHL24” or the “product”.• In this manual, “microSD™ memory card (commercially available)”, “microSDHC™ memory card (commercially available)” and “microSDXC™ memory card (commercially available)” are abbreviated as “microSD memory card” or “microSD”.• For illustrations and descriptions in this manual, refer to “Basic Manual” available on the au homepage and on the product.February 2014, 1st Editionshl24_pl_e.book 0 ページ２０１４年１月３０日　木曜日　午後３時５５分- 1 -shl24_e_01.fm[1/61]•The Company is not liable for any damages arising from earthquakes, lightning, storms, floods or other natural disasters, as well as fires, actions by third parties, other accidents, intentional or mistaken operation by the customer, or use under other unusual conditions outside the responsibility of the Company.•The Company is not liable for any incidental damages (change/disappearance of saved content, loss of business income, disruption of business, etc.) arising from use of or inability to use the product.It is recommended that you keep a copy of important phone numbers etc.•The Company is not liable for any damages arising from failure to observe the described content of this manual.•The Company is not liable for any damages arising, for example, from malfunction caused by combination with connected devices or software not related to the Company.•Captured image data or downloaded data may sometimes be altered or lost due to faults, repair or other handling of the product. The Company is not liable for any damage or lost income resulting from recovery of these data.•It is recommended you keep a copy of important data in your PC’s hard disk, etc. Whatever the cause of fault or malfunction may be, the Company assumes no responsibility for alteration or loss of saved information.* “The Company” as appears in this manual refers to the following companies:Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANYManufactured by: SHARP CORPORATIONExemptions◎Reproduction of the content of this manual in part or in whole is prohibited.◎The content of this manual is subject to change without notice.◎Every effort has been made in the preparation of this manual. Should you notice any unclear points, omissions, etc., feel free to contact us.shl24_pl_e.book 1 ページ２０１４年１月３０日　木曜日　午後３時５５分- 2 -shl24_e_01.fm[2/61]■Before using the product, thoroughly read these safety precautions for proper use. After reading, store the precautions in a safe place.These “Safety Precautions” describe instructions that should be observed to prevent damage to property or injury to the customer or others using the product.These instructions are divided into the following categories.■Explanation of Indications Used in This Manual*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient.*2 Injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or long-term hospital attendance as an outpatient.*3 Physical damage: This refers to extended damage to buildings, furniture, livestock or pets.Safety Precautions (Observe Strictly)DANGERThis symbol indicates the potential and imminent danger of death or serious injury*1 to a person.WARNINGThis symbol indicates the possibility of death or serious injury*1 to a person.CAUTIONThis symbol indicates the possibility of personal injury*2 to a person or physical damage*3.shl24_pl_e.book 2 ページ２０１４年１月３０日　木曜日　午後３時５５分- 3 -shl24_e_01.fm[3/61]■Explanation of Graphic Symbols Used in This Manual■Precautions Common to the Main Unit, Charger, au Nano IC Card (LTE), Peripheral DevicesIndicates an action that is not allowed.Indicates that use in a place where the product is likely to get wet or allowing the product to get wet is not allowed.Indicates that handling with wet hands is not allowed.Indicates an action that must be done.Indicates that disassembly is not allowed.Indicates that the power plug must be disconnected from the power outlet.DANGER Be sure to read the following hazards before use.Be sure to use only the specified peripheral devices. Use of other peripheral devices might cause overheating, ignition, rupture, fault, or leakage of liquid.Do not use, store or leave the product in hot places (e.g. by the fire, near a heater, under a kotatsu, in direct sunlight, in a car in the hot sun). Doing so might cause ignition, rupture, fault, fire or injury.ProhibitedWettingwith waterprohibitedWet handsprohibitedInstructionDisassemblyprohibitedDisconnectplug frompower outletInstructionProhibitedshl24_pl_e.book 3 ページ２０１４年１月３０日　木曜日　午後３時５５分- 4 -shl24_e_01.fm[4/61]Before entering an area where flammable gas is generated such as a gas station, be sure to turn off the product. Do not charge the battery. Failure to observe these precautions might cause the gas to catch fire. In addition, when using Osaifu-Keitai® payment function at a gas station, be sure to turn off the power in advance. (If Osaifu-Keitai® has been locked, cancel the lock before turning off the power.)Do not put the product in a cooking apparatus such as microwave oven or a pressure vessel. Doing so might cause leakage of liquid, ignition, rupture, fault, fire or injury.Do not throw the product into a fire or heat it. Doing so might cause ignition, rupture or fire.Do not short-circuit the external connection jack and the earphone/microphone jack. Do not allow conductive foreign objects (metal fragments, pencil leads, etc.) to come into contact with or get inside a jack. Doing so might cause fire or a fault.When using a metal accessory etc., do not allow the metal part to come in contact with the connection jack or power outlet. Doing so might cause electric shock, ignition, injury or a fault.Do not expose the camera lens to direct sunlight for an extended period. Doing so might cause ignition, rupture or fire by the light-collecting mechanism of the lens.The customer is not allowed to disassemble, modify or repair the product. Doing so might cause a fault, ignition, electric shock, or injury. The Company is not liable even in the event of any nonconformities arising on the product or peripheral devices as a result of modification, etc. Modification of the product is in violation of the Radio Law.InstructionProhibitedProhibitedProhibitedProhibitedProhibitedDisassemblyprohibitedshl24_pl_e.book 4 ページ２０１４年１月３０日　木曜日　午後３時５５分- 5 -shl24_e_01.fm[5/61]WARNING Be sure to read the following warnings before use.Do not drop or subject to strong impact, such as throwing. Doing so might cause rupture, overheating, ignition or a fault.Do not use outside when you can hear thunder. Doing so might risk lightning strikes and electric shock.Do not let your hands, fingers and other parts of the body touch the external connection jack or earphone/microphone jack. Doing so might cause electric shock, injury or a fault.If the product is damaged because it is dropped or something, and its display is cracked or internal parts are exposed, do not touch the cracked display or exposed parts with your hands. Doing so might cause electric shock or injury from damaged parts. Contact an au shop or Keitai Guarantee Service Center.Never charge the product when it is wet. Doing so might cause electric shock or short circuit/corrosion causing fire, a fault or burns.Although the product has waterproof capability, do not use if liquid such as water gets inside the product from the au Nano IC Card (LTE)/microSD memory card cover etc. Continued use of the product in this state might cause overheating, ignition or a fault.If charging is not completed after the specified charging time, stop charging. Failure to do so might cause leakage of liquid, overheating, rupture or ignition.Do not leave in places within the reach of small children. Small children might swallow part of the equipment by mistake and choke on them, or might drop them by mistake and cause accidents or injury.ProhibitedProhibitedProhibitedProhibitedProhibitedWettingwith waterprohibitedInstructionProhibitedshl24_pl_e.book 5 ページ２０１４年１月３０日　木曜日　午後３時５５分- 6 -shl24_e_01.fm[6/61]CAUTION Be sure to read the following cautions before use.Do not store the product in places subject to direct sunlight (e.g. in automobiles), places that get hot, places that get extremely cold, and in humid or dusty places. Doing so might cause overheating, ignition, deformation or a fault.Do not leave on unstable places such as rocky stands or tilting surfaces especially while the vibration mode is set. Dropping the product may cause injury or damage. Also, pay sufficient attention to impact, etc.Do not cover or wrap the product with cloth, bedding, etc. while using or charging the product. Doing so might cause fire, fault or injury.Do not touch the product or specified chargers (sold separately) for a long time while charging. Doing so might cause low-temperature burns.Do not use power outlets or wiring apparatus beyond its rating. Also, exceeding rating, for example, by connecting multiple devices to a single power strip might cause overheating and fire.Do not place near corrosive chemicals or in places where corrosive gas is generated. Doing so might cause a fault or loss of internal data.Stop use if there is smoke, abnormal odor or noise, excessive overheating, or other abnormalities. During charging, disconnect the specified charger (sold separately) from the power outlet or the socket, make sure that the product is not overheating before turning the power off and contact an au shop or Keitai Guarantee Service Center. Also, if you have dropped or damaged the product, do not continue to use it in that state, and contact an au shop or Keitai Guarantee Service Center.ProhibitedProhibitedProhibitedProhibitedProhibitedProhibitedInstructionshl24_pl_e.book 6 ページ２０１４年１月３０日　木曜日　午後３時５５分- 7 -shl24_e_01.fm[7/61]When inserting an earphone, etc. into the product, adjust the volume to the proper level. Setting too loud a volume or using the earphone continuously for a long period of time might adversely affect your ears. Also, raising the volume too high might prevent you from hearing sounds around you, which might in turn lead to a traffic accident at a railroad crossing or pedestrian crossing.When adjusting the volume with an earphone, etc. inserted into the product, raise the volume a little at a time. If you raise the volume too much from the outset, sudden loud noise from the earphone, etc. might adversely affect your ears.When using a charger or external device, insert/remove the connector straight to/from the jack. Make sure the orientation of the connector is correct. Failure to do so might cause damage or a fault.When small children use the equipment, have the guardian teach them the proper handling procedures so as to avoid potential dangerous situations. In addition, check that they are using the equipment as directed during use. Failure to do so might cause injury etc.InstructionInstructionInstructionInstructionshl24_pl_e.book 7 ページ２０１４年１月３０日　木曜日　午後３時５５分- 8 -shl24_e_01.fm[8/61]■Main UnitDANGER Be sure to read the following hazards before use.Do not puncture the product with a nail, hit it with a hammer or step on it.Doing so might cause leakage, overheating, rupture or ignition of the internal battery.WARNING Be sure to read the following warnings before use.Be careful not to have the product bitten by your pet.Failure to do so might cause leakage, overheating, rupture or ignition of the internal battery.Do not use a cell phone while driving a car or riding a motorbike or bicycle. Doing so may cause a traffic accident. Use of a cell phone while driving a car or motorbike is prohibited by law. Use of a cell phone while riding a bicycle may be punishable by some regulations.Turn off the product while you are aboard an airplane.Otherwise, the product may affect electronic devices and safety of your flight may be compromised. If your cell phone is permitted to be used on an airplane, use it appropriately by following instructions from the airline company. Do not connect the product with a PC aboard an airplane using the microUSB cable 01 (sold separately), since the product is automatically turned on.The product sometimes affects high-precision electronic devices. So, turn it off near such devices. (Examples of electronic devices that might be affected by the product include cardiac pacemakers, hearing aids, other electronic medical devices, fire alarms, and automatic doors. If you are using an electronic medical device, contact the device manufacturer or retailer for information about the possible effects of radio waves.)ProhibitedInstructionProhibitedInstructionInstructionshl24_pl_e.book 8 ページ２０１４年１月３０日　木曜日　午後３時５５分- 9 -shl24_e_01.fm[9/61]When using the product near an implanted pacemaker, implanted cardioverter-defibrillator or other electronic medical device, radio waves might affect these units and devices. So, please observe the following.1. Those with an implanted pacemaker or implanted cardioverter-defibrillator should carry or use the product at least 15 cm away from where the implant is.2. Change to Airplane mode on the product beforehand or turn the product off before entering a place where it may not be possible to maintain a distance of 15 cm, such as where movement is restricted, since there may be people with a cardiac pacemaker or implanted cardioverter-defibrillator nearby.3. Pay attention to the following points when using the product inside medical institutions.•Do not bring the product into operating theaters, intensive-care units (ICU) and coronary care units (CCU).•Turn the product off in hospital wards. Do not connect the product with a PC in hospital wards using the microUSB cable 01 (sold separately), since the product is automatically turned on.•Even if you are in a lobby, etc., be sure to turn the product off when there are electronic medical devices nearby.•When a medical institution has laid down designated areas where use of the product is prohibited or is not allowed to be brought in, abide by the instructions of that medical institution.4. When using electronic medical devices other than an implanted pacemaker and implanted cardioverter-defibrillator outside a medical institution (e.g. home medical treatment), check individually with the manufacturer of the electronic medical device regarding the influence of radio waves.Instructionshl24_pl_e.book 9 ページ２０１４年１月３０日　木曜日　午後３時５５分- 10 -shl24_e_01.fm[10/61]Stay alert to your surroundings when calling, messaging, browsing the Internet, shooting photos, playing games, watching TV (1Seg) or listening to music. Failure to do so might cause a fall or traffic accident.Do not send data by infrared communication with the infrared port pointing toward eyes. Doing so might affect eyes. Also, sending data with the infrared port pointing toward some other infrared device might cause false operation, etc.Do not point the illuminated light directly at someone’s eyes. Be especially careful not to shoot small children from a very close distance. Do not use Mobile light near people’s faces.Eyesight may be temporarily affected leading to accidents.Do not light the mobile light toward a driver of a car, motorbike or bicycle. If dazzled by the light, the driver might become unable to drive and cause an accident.Sometimes, very rarely some people demonstrate symptoms such as temporary muscle spasms, loss of consciousness, etc. by watching repeatedly flickering screens. Those with a past history of this should consult with a physician beforehand.InstructionProhibitedProhibitedProhibitedInstructionshl24_pl_e.book 10 ページ２０１４年１月３０日　木曜日　午後３時５５- 11 -shl24_e_01.fm[11/61]The materials of parts used on the product are as follows.CAUTION Be sure to read the following cautions before use.Use of the main unit in an automobile might sometimes affect on-vehicle electronic devices, though this rarely happens. If this happens, do not use since this may impair safe travel.If you feel any abnormality with your skin, immediately consult a dermatologist. Itching, rashes, eczema, etc. sometimes occurs depending on your physical constitution and condition.Part Material Surface treatmentOuter case (side of display) PA resin + GF45% Acrylic UV cured coatingBack cover PC + ABS resin Acrylic UV cured coatingExternal connection jack SUS Noneau Nano IC Card (LTE)/microSD memory card cover (body)PC resin Acrylic UV cured coatingau Nano IC Card (LTE)/microSD memory card cover (hinge)Elastomer resin Noneau Nano IC Card (LTE)/microSD memory card cover (seal)Silicon rubber Noneau Nano IC Card (LTE) tray POM resin NoneIMEI tray POM resin NoneEarphone/Microphone jack PA resin NoneProhibitedInstructionshl24_pl_e.book 11 ページ２０１４年１月３０日　木曜日　午後３時５５- 12 -shl24_e_01.fm[12/61]Power key PC resin Acrylic UV cured coatingDisplay Reinforced glass Acrylic hard coatingCamera lens cover PMMA resin Anti-smudge coating/AR coatingCamera lens fringe ABS resin Acrylic UV cured coatingMobile light lens cover PMMA resin NoneInfrared port cover PMMA resin NoneDo not bring the product close to magnetized objects such as cash cards, floppy disks, credit cards, and prepaid cards. Doing so might result in loss of recorded information.Do not allow liquids, metal objects, burnable items, and other foreign matter to get inside the microSD memory card slot. Doing so might cause fire, electric shock or a fault.Do not swing the product around by holding the strap etc. Doing so might cause an accident or damage.Use the product with the au Nano IC Card (LTE)/microSD memory card cover closed. If the cover is open, dirt or water may get inside causing a fault.If you have a weak heart, be careful when setting the incoming vibration and ringtone volume to prevent adverse effects on your heart.Part Material Surface treatmentProhibitedProhibitedProhibitedInstructionInstructionshl24_pl_e.book 12 ページ２０１４年１月３０日　木曜日　午後３時５５- 13 -shl24_e_01.fm[13/61]Pay attention to items becoming stuck to the main unit. The speaker uses magnets, and so thumbtacks, pins, craft knife blades, staples, and other metal objects sometimes become stuck to the main unit, and cause unexpected injury.Do not put the product directly on sand at a beach, etc. Sand or other small particles might get inside the earpiece, mouthpiece, speaker or earphone/microphone jack causing the volume to drop. If sand gets inside the product, it might cause overheating or a fault.The product may become hot by prolonged use especially in high-temperature environment. Be careful when using the product touching your skin for a long time, as it might cause low-temperature burns.When using the product for calling or data communication, do not keep the product in direct contact with your skin for a prolonged period, or do not cover the product with paper, cloth, bedding, etc. The product might get hot, causing fire, burns or a fault.InstructionProhibitedInstructionProhibitedshl24_pl_e.book 13 ページ２０１４年１月３０日　木曜日　午後３時５５- 14 -shl24_e_01.fm[14/61]■Internal Battery(The internal battery of the product is a lithium-ion battery.)The internal battery is not fully charged at the time of purchase. Charge the battery before using the product.DANGER Be sure to read the following hazards before use.If the liquid leaking from inside gets on your skin or clothes, immediately rinse it off with water to avoid injury. If the liquid gets into your eyes, do not rub but wash your eyes with water, and immediately consult a doctor to avoid the risk of losing your eyesight.The internal battery is a consumable item. If the performance of the internal battery does not recover (e.g. the usable time after each charge has become extremely short), the internal battery is at the end of service life, so stop using it. Failure to do so might cause overheating, ignition, rupture or leakage. Since the battery is built-in type, the product will be kept at an au shop etc. and charges will be incurred for repair. Also, you may not use the product in certain period of time. Note that the length of service life varies depending on the usage condition, etc.InstructionInstructionshl24_pl_e.book 14 ページ２０１４年１月３０日　木曜日　午後３時５５- 15 -shl24_e_01.fm[15/61]■ChargerWARNING Be sure to read the following warnings before use.Do not use at other voltages than the specified power supply voltage. Doing so might cause ignition, fire, overheating or electric shock.•Specified AC adapter (sold separately): 100 V AC to 240 V ACDo not charge with voltage converter for overseas travel.•Specified DC adapter (sold separately): 12/24 V DC (for negative grounded vehicles only)Firmly insert the power plug of the specified charger (sold separately) into the power outlet or cigarette lighter socket down to the base of its pins. Incomplete insertion of the power plug might result in electric shock or fire caused by overheating and ignition. Do not use damaged specified charger (sold separately) or loose power outlets or cigarette lighter sockets.If the fuse in the common DC adapter 03 (sold separately) blows, replace it with a fuse of the specified type (250 V, 1 A). Replacing with a different type of fuse might cause overheating or ignition. (For information about fuse replacement, carefully read the manual for the common DC adapter 03 (sold separately).)Do not damage, modify, twist, pull or place a heavy object on the cable of the specified charger (sold separately). Do not use a damaged cable. Doing so might cause electric shock or short circuit causing fire or a fault.If you hear thunder, do not touch the AC adapter. Doing so might cause an electric shock as a result of a lightning strike.ProhibitedInstructionInstructionProhibitedProhibitedshl24_pl_e.book 15 ページ２０１４年１月３０日　木曜日　午後３時５５- 16 -shl24_e_01.fm[16/61]Before cleaning the specified charger (sold separately), unplug its power plug from the outlet or cigarette lighter socket. If the plug remains plugged in when you clean the charger, it might cause electric shock or short circuit causing fire or a fault.Wipe off dust on the power plug. Failure to do so might cause fire, burns or electric shock.Place the common DC adapter 03 (sold separately) where it does not hinder driving or safety equipment such as airbags. Failure to do so might cause a traffic accident. Place the common DC adapter 03 (sold separately) following the instructions of its manual.When the charger is not to be used for a long time, disconnect the charger’s power plug from the power outlet or cigarette lighter socket. Failure to do so might cause electric shock, fire or a fault.Specified chargers (sold separately) are not waterproof. Never use in places subject to direct splashing with water, pet urine, etc. or in humid places such as a bathroom. Doing so might cause overheating, fire or electric shock. In the event that a charger is splashed with liquid, immediately disconnect its power plug.Do not plug in or unplug the specified charger (sold separately) with wet hands. Doing so might cause electric shock or a fault.Disconnectplug frompower outletInstructionInstructionDisconnectplug frompower outletWettingwith waterprohibitedWet handsprohibitedshl24_pl_e.book 16 ページ２０１４年１月３０日　木曜日　午後３時５５- 17 -shl24_e_01.fm[17/61]■au Nano IC Card (LTE)CAUTION Be sure to read the following cautions before use.When unplugging the power plug of the specified charger (sold separately) from the outlet or cigarette lighter socket, hold the charger to do so. If you pull the cable, it might be damaged, causing overheating, ignition or electric shock.WARNING Be sure to read the following warnings before use.Do not put the au Nano IC Card (LTE) in a cooking apparatus such as a microwave oven or a pressure vessel. Doing so might cause melting, overheating, fuming, loss of data or a fault.CAUTION Be sure to read the following cautions before use.Be careful not to injure your hand or finger when attaching/removing the au Nano IC Card (LTE).Use only the devices specified by the Company to insert the au Nano IC Card (LTE) in. Using a device not specified by the Company might cause loss of data or a fault.For the specified devices, contact an au shop or Customer Service Center.Disconnectplug frompower outletProhibitedInstructionInstructionshl24_pl_e.book 17 ページ２０１４年１月３０日　木曜日　午後３時５５- 18 -shl24_e_01.fm[18/61]Do not disassemble or modify the au Nano IC Card (LTE). Doing so might cause loss of data or a fault.Do not use or leave the au Nano IC Card (LTE) in hot places such as by a fire or a heater. Doing so might cause melting, fuming, loss of data or a fault.Do not throw the au Nano IC Card (LTE) into a fire or heat it. Doing so might cause melting, fuming, loss of data or a fault.Do not touch the IC (metal) part of the au Nano IC Card (LTE) or short-circuit it. Doing so might cause loss of data or a fault.Do not drop the au Nano IC Card (LTE) or subject it to strong impact. Doing so might cause loss of data or a fault.Do not fold, bend or place a heavy object on the au Nano IC Card (LTE). Doing so might cause loss of data or a fault.Do not wet the au Nano IC Card (LTE). Doing so might cause loss of data or a fault.DisassemblyprohibitedProhibitedProhibitedProhibitedProhibitedProhibitedWettingwith waterprohibitedshl24_pl_e.book 18 ページ２０１４年１月３０日　木曜日　午後３時５５- 19 -shl24_e_01.fm[19/61]Do not scratch the IC (metal) part of the au Nano IC Card (LTE). Doing so might cause loss of data or a fault.Do not store the au Nano IC Card (LTE) in dusty places. Doing so might cause loss of data or a fault.Do not store the au Nano IC Card (LTE) in places exposed to direct sunlight or hot and humid places. Doing so might cause loss of data or a fault.Store the au Nano IC Card (LTE) out of reach of small children. Accidental swallow might cause asphyxiation, injury, etc.ProhibitedProhibitedProhibitedInstructionshl24_pl_e.book 19 ページ２０１４年１月３０日　木曜日　午後３時５５- 20 -shl24_e_01.fm[20/61]These precautions are provided to ensure that performance can be fully demonstrated.Thoroughly read these precautions to ensure correct use.■Precautions common to the main unit, internal battery, charger, au Nano IC Card (LTE), peripheral devices●Do not apply excessive force to the product during use. Be sure not to put the product into a tightly packed bag or place a heavy object on the product in a bag. Sitting on the product in your pocket might damage the display or internal circuit board resulting in a malfunction.Keeping an external device connected to the external connection jack might damage the connector resulting in a malfunction. Such damage and malfunction are not covered by the warranty, even if there is no external damage.●To ensure waterproof property (equivalent to IPX5 and IPX7) of the product, use the product with the au Nano IC Card (LTE)/microSD memory card cover tightly closed.Note that the waterproof property is not guaranteed in every usage condition. Do not allow water to get inside the product or splash water on the charger or optional accessories. Do not open/close the au Nano IC Card (LTE)/microSD memory card cover in the rain or with water drops on the surface of the product. Doing so might cause water intrusion resulting in internal corrosion.Malfunctions determined to be caused by water intrusion are not covered by the warranty.●Do not use the product in extremely hot, cold or humid places. (Use within an ambient temperature range of 5°C to 35°C and humidity range of 35% to 85%.)•Charger•Conversion cablesHandling Precautionsshl24_pl_e.book 20 ページ２０１４年１月３０日　木曜日　午後３時５５

- 21 -shl24_e_01.fm[21/61]●Do not use the product in extremely hot, cold or humid places. (Use within an ambient temperature range of 5°C to 35°C and humidity range of 35% to 85%. Using at a temperature of 36°C to 40°C is allowed only when you use the product temporarily.)•SHL24•au Nano IC Card (LTE) (inserted into the SHL24)●Do not use in places subject to lots of dust or vibration.●Clean the product with a soft dry cloth (such as the type used for eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The display may be stained if splash or smear is left attached to the surface. Wiping the product using alcohol, thinner, benzene, detergent, etc. might erase the printing on the outer casing or cause discoloration.●Use as far away as possible from fixed-line phones, TVs and radios. Use nearby might affect them.●The product may become warm while charging or during other operations, depending on the situation, but this is not abnormal.●When the temperature of the product gets high during use, the product may temporarily lower the screen brightness or may stop part of its functions to protect the main unit.shl24_pl_e.book 21 ページ２０１４年１月３０日　木曜日　午後３時５５- 22 -shl24_e_01.fm[22/61]■Main unit●Do not forcefully press, tap or intentionally subject the display to strong impact. Doing so might cause scratching or damage.●Do not forcefully press sharp objects or hard objects against keys or display surface. Doing so might cause scratching or damage.The touch panel is designed to be lightly touched by fingers. Do not apply strong pressure with your fingers or sharp-pointed objects (such as ballpoint pens and pins) on the touch panel.In the following cases, the product may not respond to touching the touch panel, or errors in operation may occur.•Operation with gloved hands•Operation with fingernails•Operation with a foreign object placed on the touch panel•Operation with a protective film or sticker on the touch panel•Operation with water drops left or condensation formed on the surface•Operation with wet or sweaty fingers•Operation under water●Never use modified au cell phones. Use of a modified device violates the Radio Law.You can perform the following operations to confirm the unique authentication and standard marks (including certification/authentication numbers) for the product.On the home screen, tap [APPS] [[Settings] [[Device info] [[Authentication].The product has acquired the certification of conformity with technical regulations for the specified radio station based on the Radio Law and certification of conformity with technical regulations for the terminal based on the Telecommunications Business Law, and the “Technical Conformity Mark ” can be confirmed in the product as a certificate. Confirm contents of electrical certificates in the product for information on certification.If the screws of the product are removed and modifications are made to the internal components, the certification of conformity with technical regulations will become invalid. Never use the product without the valid certification. Doing so violates the Radio Law.shl24_pl_e.book 22 ページ２０１４年１月３０日　木曜日　午後３時５５- 23 -shl24_e_01.fm[23/61]●To prevent unlawful modification, the product has been designed so that it cannot be easily disassembled. Modifying the product is prohibited by the Radio Law.●Contents saved in the product, such as contacts, mails and bookmarks might be altered or lost by an accident, fault, repair or mishandling. Be sure to keep a copy of important contents. Note that the Company assumes no responsibility for any damages or lost profits resulting from altered or lost contents.●Note that content data (both charged or free content) saved on the product cannot be returned to the customer when the product is replaced for repair of a fault, for example.●The product uses liquid crystal for its display. The display response speed may become slow when the ambient temperature is low, which is due to the property of liquid crystal and not a malfunction. The display response speed will return to normal at room temperature.●Although the display used on the product is made using high-precision technology, some pixels (dots) might be lit or out at all times. This is not a malfunction.●Take care not to inconvenience people around you when you use the product in a public place.●You are recommended to store copies of individual data such as still pictures/videos you took and music in your PC by sending each file as mail attachment, etc. Note, however, that you may not be able to make copies of some copyrighted data even by the above-mentioned means.●Take care not to place magnetized items such as magnetic cards, speakers and TV sets near the product, as it might cause malfunction.Putting strong magnetism close to the product might cause false operation.●When you put the product in your pocket or bag, take care so that the display does not come in contact with metal objects or other hard objects, as it might cause scratching or damage. Also, be careful not to scratch or damage the display by using a strap whose metal or other hard part comes in contact with the display.shl24_pl_e.book 23 ページ２０１４年１月３０日　木曜日　午後３時５５- 24 -shl24_e_01.fm[24/61]●When suddenly brought into a warm place from a cold place, or when in a humid location, or when used where temperature suddenly changes (e.g. near the air discharge port of an air conditioner), water drops (i.e. condensation) sometimes are formed inside the product. Note that when used under conditions such as this, humidity might cause corrosion or a fault.●When wiping the display, wipe with a soft, dry cloth. Use of a moistened cloth, glass cleaner or other similar liquid might cause a fault.●When connecting/disconnecting an external device to/from the external connection jack or earphone/microphone jack, make sure to insert/remove the connector or earphone plug of the external device straight to/from the jack.●Note that applying unnecessary force with an external device connected to the external connection jack or earphone/microphone jack may cause damage.●Do not discard the product together with regular trash. Please cooperate in the collection of the product when it is no longer needed to protect the environment and effectively use resources. Old products are collected at au shops and other places.●Insert only a microSD memory card into the microSD memory card slot on the product.●Do not exert excessive force when attaching/removing a microSD memory card. Doing so might injure your hands or fingers.●While writing/reading data to/from a microSD memory card, do not subject the product to vibration or impact or turn off the power. Doing so might cause loss of data or a fault.●When hearing the other party's voice, make sure that the earpiece is placed at the center of your ear. If the earpiece (audio output port) is closed by the ear lobe, it may be hard to hear the voice.●Even if you cover the mouthpiece to make your voice inaudible to the other party, the other party can hear your voice.●When using handsfree call, take care to keep the speaker at a safe distance from your ears, as the speaker volume may be too loud.shl24_pl_e.book 24 ページ２０１４年１月３０日　木曜日　午後３時５５- 25 -shl24_e_01.fm[25/61]●Do not cover the light sensor with your finger or put a sticker on it. Doing so may hinder the light sensor from detecting the ambient brightness and functioning correctly.●Do not put a sticker, etc. on the proximity sensor. Doing so may cause the sensor to malfunction and make the display always turned off while making a call or during a call.●If the display gets damaged, immediately stop use and contact an au shop or Keitai Guarantee Service Center. Keeping using it may cause injury.●Putting a sticker, etc. on the display or a key may cause malfunction or shortened usage time. Also, doing so may damage the product.●If you put magnetized objects, metal straps, etc. close to the product, the speaker section sometimes emits sounds. This is not a fault.●Note that if you forcefully pull the au Nano IC Card (LTE)/microSD memory card cover or apply excessive force on it, it may be damaged.●Bright places such as under the direct sunlight sometimes make it hard to see the display. This is not a fault.■Touch panel●Use your finger to operate the touch panel. Do not use ballpoint pens, pencils or other sharp-pointed objects. Using such objects does not only hinder correct operation of the touch panel, but also might cause scratching or damage to the display.●Do not put stickers or sheets (e.g. commercially available protective films, peep prevention sheets) on the display. Doing so might hinder correct operation of the touch panel.●Operating the touch panel with fingernails might result in split nails or jammed fingers.●If the display surface is dirty or wet with sweat or water, it may not function correctly. In such case, wipe the display surface with a dry, soft cloth.●When carrying the product in your pocket or bag, take care not to put the touch panel close to metals or other conductive materials, as it might cause false operation of the touch panel.shl24_pl_e.book 25 ページ２０１４年１月３０日　木曜日　午後３時５５- 26 -shl24_e_01.fm[26/61]■Internal battery●Use in very hot or cold environments, for example, when left in an automobile with the windows closed in summer, will cause the internal battery capacity to drop and shorten the available battery usage time. This will also shorten the internal battery’s service life. Try to use the internal battery as much as possible at room temperature.●The internal battery gradually discharges after charging even if the product is not used. The internal battery may discharge completely after long time no use. Charge before using the product.●Because the internal battery performance or service life will become low, do not store the product in the following conditions.•Battery level is full (soon after charging is complete)•Battery level is empty (to the extent that the product is not powered on)•In extremely hot or humid conditions●Charge the battery before using the product for the first time after purchase, or if you have not used the product for a long time.●The internal battery is a consumable item. If the performance of the internal battery does not recover after charge, the internal battery is at the end of service life, so stop using it. Since the battery is built-in type, the product will be kept at an au shop etc. and charges will be incurred for repair. Also, you may not use the product in certain period of time. Note that the length of service life varies depending on the usage condition, etc.●Internal batteries sometimes swell up as they approach the end of their service life depending on the usage condition. This is due to the properties of lithium-ion batteries, and is not a problem in terms of safety.shl24_pl_e.book 26 ページ２０１４年１月３０日　木曜日　午後３時５５- 27 -shl24_e_01.fm[27/61]■Charger●When not using the specified charger (sold separately), remove its power plug from the power outlet or the cigarette lighter socket.●Do not wrap the power cord of the specified charger (sold separately) around the power plug. Doing so might cause electric shock, overheating or fire.●Do not forcibly bend the charger’s plug or the connection between the connector and power cord. Doing so might cause electric shock, overheating or fire.●Do not use the common DC adapter 03 (sold separately) with the car engine stopped. Doing so might result in draining of the car battery.■au Nano IC Card (LTE)●The au Nano IC Card (LTE) is lent to you by au. In case of loss or damage, the card will be replaced at your expense. When malfunction is suspected, or in case of theft or loss, contact an au shop or PiPit.●Do not forcibly remove or insert the au Nano IC Card (LTE). Be careful not to exert excessive force when inserting the card into your au cell phone.●You are responsible for any damage caused by inserting your au Nano IC Card (LTE) into some other IC card reader/writer, etc.●Keep the IC (metal) part of your au Nano IC Card (LTE) clean. Wipe the card with a dry, soft cloth (such as for cleaning eyeglasses) for cleaning.●Do not put stickers, etc. on the au Nano IC Card (LTE).shl24_pl_e.book 27 ページ２０１４年１月３０日　木曜日　午後３時５５- 28 -shl24_e_01.fm[28/61]■Camera●When using the camera, follow common rules of etiquette regarding camera use.●Image data might be altered or lost due to malfunction, repair or mishandling of the product. The Company takes no responsibility for recovery of altered or lost data, damages resulting from altered or lost data, and lost profits.●When photographing important occasions (such as a wedding), take a trial shot and check the shot image to make sure it is correctly shot.●Do not use the camera for recording commercially available books or information of which photographing is not allowed.●Do not leave the camera lens exposed to direct sunlight. Imaging elements might be discolored or burnt.■Music, videos and TV (1Seg)●Do not listen to music, watch videos or TV (1Seg) while driving a car or motorbike, or riding a bicycle. Use of cell phones while driving a car or motorbike is prohibited by law. (Use of cell phones while riding a bicycle may also be punishable by law.) In addition, stay alert to the traffic around you even when walking. Surrounding sounds might not be heard clearly, and gazing at the screen may distract your attention causing a traffic accident. Be especially careful at railroad crossings, station platforms and pedestrian crossings.●Take care not to listen at ear-splitting volume for a long time, as it might affect hearing.●Be careful of sound leakage from earphones in trains or other places with many people around you.shl24_pl_e.book 28 ページ２０１４年１月３０日　木曜日　午後３時５５- 29 -shl24_e_01.fm[29/61]■Copyrights and rights of portrait●If the data you shot or recorded using the product or the data you downloaded from the Internet etc. is in part or in whole protected by the third party’s copyright, you are not allowed to copy, distribute, publicly send, modify the data without consent of the copyright holder, except for personal use, under the copyright law.In addition, do not use or modify portraits or names of other individuals without their consent, as it may infringe on rights of portrait.Note that shooting and recording might be restricted at some live performances, shows and exhibitions even for personal use.●Be careful about the copyright and portrait right when posting still pictures you shot, etc. on Internet homepages.■Back up content on the product●Please back up important content recorded or downloaded to the product to an outside source. Content recorded to memory on the product sometimes disappears or is altered by unexpected factors, such as static electricity or a fault, or by repair, mishandling, etc.* How to make backups: Store important data such as phonebook data, music, shot still pictures and videos on external memory devices such as a microSD memory card or PC. You can also send files as mail attachment or transfer to your PC. Note, however, that there are some data that cannot be copied by using these means.shl24_pl_e.book 29 ページ２０１４年１月３０日　木曜日　午後３時５５- 30 -shl24_e_01.fm[30/61]The product has various security codes that you can use.The available security codes are as follows. Do not forget the various security codes that are set as they are necessary for various operations and contracts.■Security code■Security key■PIN code■Lock No. (NFC/Osaifu-Keitai lock)Available Security CodesSecurity CodesExample of usage ATo do remote operation of voice mail and call forwarding services from a landline phoneBTo use Customer Service Center and to do various inquiries, applications, and modifications on the au homepageInitial value A four digit number chosen by the customer and noted on the application formExample of usage To set and release restriction on voice calls, etc.Initial value 1234Example of usage To prevent unauthorized use of the au Nano IC Card (LTE) by third partiesInitial value 1234Example of usage To use the NFC/Osaifu-Keitai lockInitial value 1234shl24_pl_e.book 30 ページ２０１４年１月３０日　木曜日　午後３時５５- 31 -shl24_e_01.fm[31/61]■PIN CodeTo prevent unauthorized use of the au Nano IC Card (LTE) by a third party, you can set the product to require PIN code entry every time the power is turned on. You also need to enter PIN code when setting whether PIN code entry is required.If PIN code is incorrectly entered three times consecutively, the PIN code will be locked. You can unlock the PIN code using PUK code.•PIN code is “1234” and PIN code entry is set to not be required at the time of purchase. You can change PIN code to any four- to eight-digit number, and set PIN code entry to be required as necessary.■PUK CodeIn case PIN code is locked, you can unlock it by entering PUK code.•PUK code is an eight-digit number given at the time of purchase, which is printed on the back side of the plastic card on which your au Nano IC Card (LTE) is attached.•After entering PUK code, you need to set a new PIN code.•If PUK code is incorrectly entered ten times consecutively, contact an au shop, PiPit or Customer Service Center.•“PIN code” is not reset by initializing the product.PIN◎When the PIN code is locked, the product may restart for the security reasons.shl24_pl_e.book 31 ページ２０１４年１月３０日　木曜日　午後３時５５- 32 -shl24_e_01.fm[32/61]Before using the product, thoroughly read the contents of “Notes on Waterproof Property” to ensure correct use. Failure to follow the contents described in these sections may cause intrusion of water, sand or other foreign material, resulting in overheating, ignition, electric shock, injury or fault.Proper operations of the product are not guaranteed in every possible condition during actual use. Faults determined, after an inspection, to be caused by mishandling by the customer such as by using the product without following the contents written on “Notes on Waterproof Property” are not covered by the warranty.■Waterproof Property of the ProductThe product has a protection rating (JIS C 0920) for waterproof property equivalent to IPX5*1 and IPX7*2 on the condition that the au Nano IC Card (LTE)/microSD memory card cover is securely closed (Based on the experiments by the Company).The product does not have dustproof property.*1 IPX5 means that the cell phone continues to function as a phone after being subjected to a water jet (approximately 12.5 liters/min) discharged from a water pouring nozzle (inner diameter: 6.3 mm), from all directions and approximately 3 meters away from the cell phone for at least 3 minutes.*2 IPX7 means that the cell phone continues to function as a phone after being gently lowered into a tank filled with still tap water (at room temperature) to the depth of 1 meter, immersed at the bottom for approximately 30 minutes and then taken out of the tank.Notes on Waterproof Propertyshl24_pl_e.book 32 ページ２０１４年１月３０日　木曜日　午後３時５５- 33 -shl24_e_01.fm[33/61]■Waterproof property of the product enables you•To talk on the product in the rain without an umbrella (with a precipitation of 20 mm/hour or smaller).•To use the product at the poolside. However, do not get it wet with water other than tap water such as water in the swimming pool or submerge it in water in the swimming pool.•To wash the product with the low-pressure water flow of a tap water (6 liters/min or lower) at the room temperature (5°C to 35°C).■Handling the product•Close the au Nano IC Card (LTE)/microSD memory card cover securely. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surface may cause intrusion of water.•If liquid such as water is splashed onto the product with the au Nano IC Card (LTE)/microSD memory card cover opened, the liquid may seep inside and cause electric shock or fault. Stop using it, turn off the power and then contact an au shop near you or Keitai Guarantee Service Center.•When the product is wet, wipe it with a dry and clean cloth.•When your hand or the product is wet, never open/close the au Nano IC Card (LTE)/microSD memory card cover.•The product is resistant to fresh and tap water at room temperature (5°C to 35°C) only. If you let the product get wet with or submerged into the liquids other than fresh and tap water at room temperature, stop using it and wash it with fresh and tap water at room temperature.•Do not use the earphone jack/external connection jack when the jack is wet or sand or dust is attached to it. Doing so may cause impairment of the waterproof property or cause electric shock, short circuit, etc. resulting in a fault, burns or fire.shl24_pl_e.book 33 ページ２０１４年１月３０日　木曜日　午後３時５５- 34 -shl24_e_01.fm[34/61]■Notes on Using the Product•Do not let the product get wet with or submerged into the following liquids.･Water containing soap, detergent or bath powder･Seawater or water from a swimming pool･Hot spring, hot water, etc.•If the product gets wet with seawater, water from a swimming pool, soft drink, etc. or dust, sand, mud, etc. is attached on the product, immediately wash it away with fresh and tap water at room temperature (5°C to 35°C). When it gets dry and coagulated on the product, the stains get hard to get rid of and may cause fault.•Using the product without completely washing sand or mud away may cause fault such as scratches and damages on the product.•Do not immerse the product in a bathtub or swimming pool. Also, do not use it under water. (including key operations.)•The product is not designed to withstand high water pressure. Do not expose the product to a strong water flow with tap water, shower, etc. (6 liters/min or more) or submerge it under water.•To prevent condensation, wait until the product reaches room temperature before you bring it from a cold place into a warm place. If condensation occurs, leave it in room temperature until the condensation is removed.•Do not get the product wet with hot water, use it in saunas or expose it to hot air from hair dryer etc.•Do not place the product where it gets extremely hot or cold such as near a stove or in a refrigerator.•Volumes may temporarily become lower due to water entering in the earpiece, mouthpiece and speaker. Drain water and dry the product well before use.shl24_pl_e.book 34 ページ２０１４年１月３０日　木曜日　午後３時５５- 35 -shl24_e_01.fm[35/61]•When water drops are attached on the touch panel or you perform touch operations with your hand wet, the product may not properly function.•The product does not float on water.•Do not use the product in heavy rain.•Do not leave the product wet. Doing so may let the liquids freeze on the product in cold places or otherwise cause fault.•Do not drop or otherwise subject the product to strong impact or jab the earpiece, mouthpiece, speaker, etc. with a sharp object. Doing so may cause scratching, deformation, etc. on/of the product, resulting in impairment of waterproof property.•Do not place the product directly on sand at a beach, sandbox, etc. or on mud. Grains of sand may get into the earpiece, speaker, etc., causing the volume to drop.•If the au Nano IC Card (LTE)/microSD memory card cover degrades or is damaged, the waterproof property cannot be maintained. In such case, contact an au shop near you.shl24_pl_e.book 35 ページ２０１４年１月３０日　木曜日　午後３時５５- 36 -shl24_e_01.fm[36/61]■Maintaining the Waterproof Property■Rubber sealThe rubber seal on the au Nano IC Card (LTE)/microSD memory card cover is important to maintain the waterproof property. Be sure to observe the following items.•Do not remove or scratch it.•When closing the au Nano IC Card (LTE)/microSD memory card cover, do not get the rubber seal caught. Also, do not insert sharp objects into gaps around the au Nano IC Card (LTE)/microSD memory card cover or the earphone/microphone jack section or external connection jack section.Doing so may damage the rubber seal and cause intrusion of water.•It is recommended to replace the parts for maintaining the waterproof property (pay service) once every two years regardless of whether any abnormality is present. For information on part replacement, contact an au shop near you.■Precautions on ChargingSpecified charger (sold separately) and optional accessories are not waterproof. Be sure to check the following items before and after charging.•Check that the product is not wet. If it is wet or after it gets wet, drain water well and wipe remaining water off with a clean dry cloth etc. before inserting the microUSB plug into the external connection jack.•Never charge the battery if the product is wet. Doing so may cause electric shock, short circuit, etc., resulting in fire, a fault or burns. Be sure to dry the product before use.•Do not touch the specified charger (sold separately) with wet hands. Doing so may cause electric shock.•Do not splash water onto the specified charger (sold separately) or optional accessories when using the equipment. Do not use the equipment in places where water is regularly used such as a bathroom, shower room, kitchen and lavatory. Doing so may cause fire or electric shock.shl24_pl_e.book 36 ページ２０１４年１月３０日　木曜日　午後３時５５- 37 -shl24_e_01.fm[37/61]■Washing the ProductIf any stain, dust, sand, soft drink, etc. is attached to the surface of the product, gently wipe it off with a cloth and wash the product under a mild water flow (up to 6 liters/min) of tap water at room temperature (5°C to 35°C) approximately 10 cm away from the faucet or shower head.Hold the au Nano IC Card (LTE)/microSD memory card cover so that it does not open, and wash the product with your hands without using a brush or sponge. After washing the product, drain water off and then use the product.•Make sure that the au Nano IC Card (LTE)/microSD memory card cover is securely closed before washing the product.•Do not wash the product with a washing machine or an ultrasound bath.•The earphone/microphone jack section and external connection jack section are especially subject to stain such as dust or sand adhesion. Wash away stain carefully so as not to keep it remaining in the sections. Also, after washing it away, make sure the sections get sufficiently dried off before using the product. Using the product with sand or water drops remaining in the jack sections may cause fault.•When cleaning the earphone/microphone jack section and external connection jack section, do not use tools such as a cotton swab or jam a cloth into the jack sections. Doing so may cause impairment of waterproof property etc., resulting in a fault, burns or fire.•Never put the product in a microwave oven for drying it. Doing so may cause the internal battery to leak liquid, overheat, rupture or ignite. Also, doing so may cause the product to overheat, emit smoke, ignite or cause destruction of circuit components.•Do not expose the product to hot air from a hair dryer or leave it in a high temperature environment for drying it. Doing so may cause the product to deform, discolor, get out of order, etc.shl24_pl_e.book 37 ページ２０１４年１月３０日　木曜日　午後３時５５- 38 -shl24_e_01.fm[38/61]■Draining WaterIf the product gets wet, make sure to drain water remaining in the “earphone/microphone jack section”, “external connection jack section”, “earpiece (receiver) section”, “mouthpiece (microphone) section”, “speaker section”, “key section”, etc.AWipe off water on the surface of the product carefully with a dry and clean cloth etc.If a strap is attached, dry it sufficiently as well.shl24_pl_e.book 38 ページ２０１４年１月３０日　木曜日　午後３時５５- 39 -shl24_e_01.fm[39/61]BHold the product securely and shake it approximately 20 times until there is no more water splashing.Make sure of the safety around you and shake the product while holding it securely not to let it drop.Mouthpiece (Microphone)sectionExternal connectionjack sectionEarpiece (Receiver) sectionSpeaker sectionEarphone/Microphonejack sectionshl24_pl_e.book 39 ページ２０１４年１月３０日　木曜日　午後３時５５- 40 -shl24_e_01.fm[40/61]CWipe off water remaining in the grooves of each section by gently putting the product against a dry and clean cloth etc.Since water is sometimes left in the grooves of each section, clear them of water by putting a cloth against their openings and gently patting them. Make sure that there is no more water or foreign objects remaining in them.Key sectionshl24_pl_e.book 40 ページ２０１４年１月３０日　木曜日　午後３時５５- 41 -shl24_e_01.fm[41/61]DLay out a dry cloth etc. beneath and leave the product on the cloth at room temperature for approximately 2 to 3 hours to dry it.Water, if any, remaining in the product may ooze up after wiping off.Do not wipe off water remaining in the grooves directly by a cotton swab etc.■Precautions to be taken after water drainingDo not use the product with water drops still left on it.•Doing so may cause call disruption or cause clothes or bags to get wet.•Doing so may cause the earphone/microphone jack, external connection jack, etc. to short-circuit, causing fire or a fault.•Doing so in a cold region may cause a fault due to water drops freezing.shl24_pl_e.book 41 ページ２０１４年１月３０日　木曜日　午後３時５５

Navigation menu