Sharp HRO00201 GSM/GPRS 850/1900, WCDMA/HSPA FDD V, BT/BLE, 802.11 a/b/g/n/ac, NFC, GPS Wireless Handheld User Manual II

Download:
Mirror Download [FCC.gov]
Document ID	2185002
Application ID	b3Xn9x5BE3pG8fyUQamJCA==
Document Description	User Manual II
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	212.41kB (2655135 bits)
Date Submitted	2014-02-07 00:00:00
Date Available	2014-03-01 00:00:00
Creation Date	2014-01-30 09:40:02
Document Lastmod	2014-02-07 10:38:50
Document Title	User Manual II

shl24_e.book
0 ページ
２０１４年１月３０日
木曜日
午前９時６分
shl24_e.book
1 ページ
２０１４年１月３０日
木曜日
Preface
Thank you for buying the “AQUOS PHONE SERIE mini SHL24” (simply called
the “SHL24” or the “product” from here on).
Before using the product, be sure to read the “Basic Manual” (this manual) and
“Notes on Usage”/“Setting Guide” available on the au homepage to ensure
correct use. After you have finished reading the manuals, be sure to keep them
accessible and store the printed manuals (“取扱説明書” (Basic Manual), “ご利
用にあたっての注意事項” (Notes on Usage) and “設定ガイド” (Setting Guide))
(Accessories) in safe places so that you can refer to them whenever you need
them. If you lose the printed manuals (Accessories), contact an au shop or
Customer Service Center.
Operating Instructions
■ “Basic Manual” and “Setting Guide”
The “Basic Manual” (this manual) and “Setting Guide” available on the au
homepage describe basic operations of major functions.
For detailed descriptions of various functions, refer to the “Instruction Manual
application” (Japanese version) that can be used on the product or “Full
Instruction Manual” (Japanese) available on the au homepage:
(http://www.au.kddi.com/english/support/manual/)
Basic Manual
午前９時６分
shl24_e.book
2 ページ
２０１４年１月３０日
木曜日
• If you are using the product overseas, check the relevant laws and
regulations of the country/region you visit.
• When the product is used by a child, parents or guardians should thoroughly
read the “Basic Manual” (this manual) or “Notes on Usage”/“Setting Guide”/
“Full Instruction Manual” (Japanese) available on the au homepage and
teach the child how to use it.
Cell Phone Etiquette
■ Use of cell phones is not allowed in the following
places!
• Do not use a cell phone while driving a car or riding a motorbike or bicycle. It
may cause a traffic accident. Use of a cell phone while driving a car or
motorbike is prohibited by law. Use of a cell phone while riding a bicycle may
be punishable by some regulations.
• Be sure to turn off the product while you are aboard an airplane. Otherwise,
safety of your flight may be compromised.
List of Packaged Items
Before you start using the product, make sure that you have all the following
packaged items with the product.
■ “Instruction Manual Application” (Japanese/English
Version)
• The company names and product names appearing in this manual are
trademarks or registered trademarks of their respective holders.
• For exemptions, refer to “Notes on Usage” available on the au homepage.
February 2014, 1st Edition
Safety Precautions
For inquiries, call:
From fixed-line phones:
(toll free)
From au cell phones:
When Using the Product
“157” on your au cell phone.
For service canceling procedure or operation in case of loss or
theft (toll free)
From fixed-line phones:
From au cell phones:
area code not required
In case above numbers are not available, call toll-free:
0120-977-033 (except Okinawa)
0120-977-699 (Okinawa)
Keitai Guarantee Service Center
For loss, theft or damage
(toll free)
From fixed-line phones/au cell phones:
0120-925-919
Business hours: 9:00 to 21:00 (7 days a week)
Cell phone and PHS operators collect and recycle
unused telephones, batteries and battery
chargers at stores bearing the
logo regardless
of brand and manufacturer to protect the
environment and reuse valuable resources.
Sold by: KDDI CORPORATION,
OKINAWA CELLULAR TELEPHONE COMPANY
shl24_e.book
ページ ２０１４年１月３０日
Manufactured
by: SHARP 7
CORPORATION
木曜日
M & mark
Hold it over a reader/writer when using Osaifu-Keitai®/NFC.
shl24_e_00_hyo1.fm
~~~~
Send
and receive data via IC communication.
[0/0]
N Speaker
• Communication is not possible even inside the service area in places where
the signal does not reach (e.g. tunnels and basements). Also,
communication may not be possible in poor reception areas. Communication
may be interrupted if you move into a poor reception areas during
communications.
• Since this product uses radio waves, the possibility of communication
intercepts by third parties cannot be eliminated. (Though the LTE/CDMA/
GSM/UMTS system has highly secure confidential communication features.)
• The product is compatible with the international roaming service. Each
network service varies depending on the area and service content.
For details, refer to “auのネットワークサービス・海外利用” (au Network
Services/International Roaming) described in “Instruction Manual
application” (Japanese) or “Full Instruction Manual” (Japanese) available on
the au homepage.
• Since the product is a radio station under the Radio Law, you may be asked
to temporarily submit the product for inspection in accordance with the Radio
Law.
• The IMEI information of your cell phone is automatically sent to KDDI
CORPORATION for maintenance and monitoring operational status of your
cell phone.
• Since the battery is built into the product, you cannot replace it yourself. For
replacing the battery, contact an au shop or Customer Service Center.
• Take care not to inconvenience people around you when you use the product
in a public place.
午前９時６分
shl24_e.book
8 ページ
２０１４年１月３０日
木曜日
Attaching the au Nano IC Card (LTE)
Internal antennas
GPS antenna
au Nano IC Card (LTE)/microSD memory card cover
au Nano IC Card (LTE) tray slot
microSD memory card slot
IMEI tray
Allows you to confirm the product’s IMEI.
Mouthpiece (Microphone)
Transmits your voice to the other party during a call. It is also used for
recording sounds. Take care not to cover the microphone with your fingers
etc. when using it.
Strap eyelet
Earphone/Microphone jack
External connection jack
When you connect the common AC adapter 04 (sold separately), the
microUSB cable 01 (sold separately), etc. to the product, some applications
may not function properly since the geomagnetic sensor is affected by the
magnetism of connected devices. Use the product after removing the
cable.
◎ The back cover of the product cannot be removed. Removing it forcibly
may cause damage or a fault.
◎ The battery is built into the product, and cannot be removed by the
customer. To force the power off, refer to “Turning the Power Off Forcibly”
(zP.14).
TV antenna, Wi-Fi®/Bluetooth® antenna, internal antennas, GPS antenna
◎ Antennas are built into the product. Do not cover with hand during calls or
data communication, or place stickers over antennas. Doing so may
affect call/communication quality.
■ Using Emergency Rapid Mail
Emergency Rapid Mail is a service to collectively deliver Earthquake Early
Warning and Tsunami Warning provided by the Japan Meteorological Agency,
and Disaster and Evacuation Information provided by the national government
or the local governments to au phones in the specified areas.
• At the time of purchase, receiving setting of Emergency Rapid Mail
(Earthquake Early Warning, and Disaster and Evacuation Information) is set
to “受信する” (Receive). You can receive Tsunami Warning by setting 災害・
避難情報 (Disaster and Evacuation Information).
When receiving Earthquake Early Warning, secure your safety and act
composedly according to the surrounding situations.
When receiving Tsunami Warning, leave sea coasts immediately and
evacuate to safe places such as hills and strongly-built tall buildings.
削除 (Delete)
設定
(Settings)
Warranty
(Japanese)
SHL24
• 取扱説明書 (Basic Manual) (Japanese)
• ご利用にあたっての注意事項 (Notes on Usage) (Japanese)
• 設定ガイド (Setting Guide) (Japanese)
The following items are not included in the package.
microSD memory card
AC adapter
Earphone
microUSB cable
◎ The battery is built into the product.
Using au Disaster Countermeasure
Application
au Disaster Countermeasure is an application in which you can use Disaster
Message Board, Emergency Rapid Mail (Earthquake Early Warning, Disaster
and Evacuation Information, and Tsunami Warning), Disaster Voice Messaging
Service and Disaster Information/Donation website.
A On the home screen, [APPS] [[au災害対策] (au Disaster
Countermeasure).
The au Disaster Countermeasure menu is displayed.
■ Using Disaster Message Board
Disaster Message Board is a service to enable customers in disaster areas to
register their safety information via LTE NET when large-scale disasters, such
as an earthquake whose Japan seismic scale is approximately 6-lower or
more, occur. The registered safety information can be checked by customers
using au phones, and also from other carriers’ cell phones, PCs, etc.
For details, refer to “Disaster Message Board Service” on the au homepage.
A From the au Disaster Countermeasure menu, [災害用伝言
板] (Disaster Message Board).
Delete received mails.
緊急地震速報 (Earthquake Early Warning)
Set whether to receive Earthquake Early Warning.
• Tap [受信する] (Receive)/[受信しない] (Not
receive) [[OK].
災害・避難情報 (Disaster and Evacuation
Information)
Set whether to receive Disaster and Evacuation
Information, and Tsunami Warning.
• Tap [受信する] (Receive)/[受信しない] (Not
receive) [[OK].
音量 (Volume)
Set the volume of the receiving sound.
バイブ (Vibrator)
Set whether to activate the vibrator at the time of
reception.
マナー時の鳴動 (Linkage to the manner mode)
Set whether to notify you with the manner mode
settings applied in the manner mode.
緊急地震速報 (Earthquake Early Warning)
Check the receiving sound and vibration of the
product for Earthquake Early Warning.
災害・避難情報 (Disaster and Evacuation
Information)
Check the receiving sound and vibration of the
product for Disaster and Evacuation Information,
and Tsunami Warning.
午前９時６分
shl24_e.book
9 ページ
２０１４年１月３０日
木曜日
Removing the au Nano IC Card (LTE)
shl24_e_01.fm
Before
attaching the au Nano IC Card (LTE), turn the product off and remove
the [1/27]
microSD memory card.
shl24_e_01.fm
Before
removing the au Nano IC Card (LTE), turn the product off and remove
the [2/27]
microSD memory card.
A Open the au Nano IC Card (LTE)/microSD memory card
cover.
A Open the au Nano IC Card (LTE)/microSD memory card
cover.
B Slowly pull the au Nano IC Card (LTE) tray straight out by
hooking a finger on it.
B Slowly pull the au Nano IC Card (LTE) tray straight out by
hooking a finger on it.
２０１４年１月３０日
木曜日
◎ When you receive Emergency Rapid Mail, you will be notified by the
dedicated alarm tone and the vibrator. The alarm tone cannot be
changed.
午前９時６分
shl24_e.book
5 ページ
２０１４年１月３０日
木曜日
Illustrations and Descriptions in This
Manual
* When you receive Earthquake Early Warning, you will be notified by the alarm
tone, voice (“地震です” (An earthquake has occurred)) and the vibrator.
◎ Information intended for the areas of other than your present location may
be received.
◎ As for this service, the Company shall not be liable for any damage
incurred on the users resulted from failure or delay of information delivery
due to communication disturbance or system failure, contents of the
information or other problems that are not supposed to be blamed on the
Company.
◎ For details on Earthquake Early Warning and Tsunami Warning provided
by the Japan Meteorological Agency, refer to the agency’s homepage.
(http://www.jma.go.jp/jma/indexe.html)
Earthquake Early Warning
◎ Earthquake Early Warning notifies areas where a strong shaking (Japan
seismic scale 4 or more) is expected when an earthquake whose
maximum Japan seismic scale is predicted of 5-lower or more has been
detected.
◎ This service detects an earthquake (P-wave, preliminary tremors) near
the seismic center immediately after the earthquake occurs and
automatically calculates its location, scale and predicted strength of the
shaking. After that, you will be notified of the earthquake as soon as
possible within a few seconds to dozens of seconds before a strong
shaking from the earthquake (S-wave, principal shock) occurs.
◎ In the vicinity of the seismic center, a strong shaking may reach you
before Earthquake Early Warning.
◎ The Earthquake Early Warning distribution system provided by this
service is different from that provided by TV, radio and other
communication media and thus the arriving time of Earthquake Early
Warning may be different among those media.
Tsunami Warning
◎ Tsunami Warning notifies areas including target sea coasts of Major
Tsunami Warning and Tsunami Warning provided by the Japan
Meteorological Agency.
Disaster and Evacuation Information
◎ Disaster and Evacuation Information notifies information related to the
safety of citizens, such as evacuation advisories, evacuation orders or
various alarms delivered by the national government or the local
governments.
午前９時６分
shl24_e.book
6 ページ
２０１４年１月３０日
木曜日
Names and Functions of Parts
■ Note on Key Illustrations
In this manual, the key illustrations are simplified as shown below.
■ Description of Operations for Selecting Item/Icon/Key
etc.
In this manual, operation procedures are described as below.
Description
On the home screen,
[APPS] [[Phone]
[Enter “141” [[Call].
f (hold down for at
least 2 seconds).
Explanation
Tap “APPS” at the top of the 3-Line Home screen
and tap “
Phone”. Then tap in order of
“
”, “
” and “
”. Lastly, tap
“
”.
Hold f down for at least 2 seconds.
* Tapping is to select a key or icon displayed on the screen by lightly tapping it with
your finger.
■ Notes on Illustrations/Screenshots
The screenshots in this manual are simplified and may look different from the
actual screens. Also, part of the screen may be omitted.
In this manual, part of the
screen such as icons are
omitted.
A Earpiece (Receiver)
B Proximity sensor/Light sensor
Proximity sensor prevents inadvertent operations of the touch panel during
a call.
Light sensor detects the ambient brightness and adjusts the brightness of
display.
C Display (Touch panel)
D ud Volume up/down key
Adjust the volume.
Long touch “u” on the Welcome Sheet (Lock Screen) to turn on the mobile
light.
Long touch “d” on the home screen or Welcome Sheet (Lock Screen) to
set/disable the manner mode.
E Charging/Incoming indicator
F In camera lens
G f Power key
Turn the screen on/off.
Hold it down to turn on/off the power, set the manner mode, etc.
■ Back/Top and Bottom
Disaster Voice Messaging Service is a service to record voices with a
smartphone and deliver them as a voice message to people to whom you want
to deliver the information that you are safe when large-scale disasters occur.
A From the au Disaster Countermeasure menu, [災害用音声お
届けサービス] (Disaster Voice Messaging Service).
Follow the on-screen instructions.
◎ This service is available only in Japan (Not available overseas).
◎ Emergency Rapid Mail is free of both information charges and
communication charges.
◎ Emergency Rapid Mail cannot be received while the power is turned off
or during a call.
◎ Emergency Rapid Mail may not be received during communication such
as while sending and receiving e-mails/SMSs and while using the
browser or when you are in a place where the signal cannot be received
(e.g. tunnels and basements) or the signal is weak, even within the
service area.
◎ Emergency Rapid Mail which failed to be received will not be able to be
received again.
午前９時６分
shl24_e.book
10 ページ
２０１４年１月３０日
木曜日
Using a microSD Memory Card
shl24_e_01.fm
[3/27]
Attaching a
◎ To use this service via Wi-Fi®, making initial settings via LTE/3G networks
is required.
◎ Voice messages can be recorded for up to 30 seconds.
◎ Voice messages can be exchanged among au phones as well as other
carriers’ cell phones and PHS devices.
◎ Voices may not be heard when the media sound volume is set to low.
◎ When no free space is left on the internal memory, voice messages may
not be saved or played.
◎ Some cell phones cannot receive voice messages. For details, refer to
the au homepage.
■ Using Disaster Information/Donation Website
You can check the histories of Disaster and Evacuation Information delivered
by the local governments, Disaster Information portal and donation website.
A From the au Disaster Countermeasure menu, [災害情報/義
援金サイト] (Disaster Information/Donation website).
Actual screen
In this manual
◎ Explanations of this manual are based on the case when the color of the
main unit is “Pink” as an example.
◎ Explanations of this manual are based on the case when the product is
held vertically. If you hold it horizontally, menu items/icons/on-screen
keys etc. may be different.
◎ Menu items, layers and icons described in this manual may be different
according to functions being used and conditions.
◎ In this manual, “microSD™ memory card (commercially available)”,
“microSDHC™ memory card (commercially available)” and “microSDXC™
memory card (commercially available)” are abbreviated as “microSD
memory card” or “microSD”.
◎ All the prices written in this manual exclude taxes unless otherwise noted.
TV antenna
Wi-Fi®/Bluetooth® antenna
Mobile light
Out camera lens
Infrared port
Select an item to check.
午前９時６分
shl24_e.book
11 ページ
２０１４年１月３０日
木曜日
Checking the IMEI
Before attaching a microSD memory card, turn the product off.
shl24_e_01.fm
An IMEI (international mobile station equipment identity) is a special
[4/27]
identification code assigned to each phone. You can pull the IMEI tray out to
confirm the IMEI of the product.
A Open the au Nano IC Card (LTE)/microSD memory card
cover.
A Turn the product off and remove the microSD memory
card.
microSD Memory Card
B Slowly insert the microSD memory card into the microSD
memory card slot.
microSD memory
card slot
au Nano IC
Card (LTE) tray
For details on removing the microSD memory card, refer to “Removing the
microSD Memory Card” (zP.10).
B Slowly pull the IMEI tray straight out by hooking a finger on
it.
microSD memory
card slot
午前９時６分
shl24_e.book
12 ページ
２０１４年１月３０日
木曜日
Charging with the Specified AC Adapter (Sold
DC Adapter (Sold
午前９時６分
shl24_e.book
13 ページ
木曜日
Charging with a PC
Separately)/Specified
shl24_e_01.fm
[5/27]
Separately)
Theshl24_e_01.fm
followings are the explanation of how to charge the internal battery by
[6/27] the product to a USB port of a PC through which the battery can be
connecting
charged.
The followings are the explanation of how to connect the common AC adapter
04 (sold separately)/common DC adapter 03 (sold separately) to charge. For
details on the specified AC adapter (sold separately)/specified DC adapter
(sold separately), refer to “Introduction of Peripheral Devices” (zP.19).
A Connect the microUSB cable 01 (sold separately) to a USB
port of a PC after the PC is activated completely.
External
connection jack
A Confirm the direction of the microUSB plug of the common
AC adapter 04 (sold separately)/common DC adapter 03
(sold separately) and insert it in the direction of the arrow
to the external connection jack of the product.
USB port of a PC
External
connection jack
IMEI tray
２０１４年１月３０日
microUSB cable 01
(sold separately)
Protruding edges
B Connect the microUSB cable 01 (sold separately) to the
product after the product is activated completely.
C Put the au Nano IC Card (LTE) on the au Nano IC Card
(LTE) tray.
C Remove the au Nano IC Card (LTE) from the au Nano IC
Card (LTE) tray.
Make sure the notches on the au Nano IC Card (LTE) and au Nano IC
Card (LTE) tray face the proper orientation and put the card slowly on the
tray.
IC (metal) part up
D Slowly insert the au Nano IC Card (LTE) tray into the au
Nano IC Card (LTE) tray slot, taking care not to let the tray
be caught on the metal parts on both sides of the slot.
Metal parts
D Slowly insert the au Nano IC Card (LTE) tray into the au
Nano IC Card (LTE) tray slot, taking care not to let the tray
be caught on the metal parts on both sides of the slot.
C Close the au Nano IC Card (LTE)/microSD memory card
cover.
Removing the microSD Memory Card
Before removing the microSD memory card, turn the product off.
au Nano IC Card (LTE)
tray slot
A Open the au Nano IC Card (LTE)/microSD memory card
cover.
B Slowly push the microSD memory card in all the way.
Metal parts
After it clicks, let the microSD memory card come back out a little without
releasing it. Releasing the card when it is pushed deeply into the slot may
cause it to pop out.
E Close the au Nano IC Card (LTE)/microSD memory card
cover.
IC (metal) part
◎ The IMEI is information required when requesting servicing or repairs.
◎ The IMEI tray cannot be removed from the main unit. Take care not to
apply force when handling.
◎ You can also operate the product to confirm the IMEI.
On the home screen, tap [APPS] [[Settings] [[Device info]
[[Status] and confirm the IMEI field.
◎ Make sure that the top/bottom and front/rear of the microSD memory card
are facing correctly.
Trying to force a wrongly oriented card into the slot could make it
impossible to remove the card or result in damage.
◎ Do not touch the terminal part of a microSD memory card.
au Nano IC Card (LTE) tray
Confirm the position of the au Nano IC Card (LTE) tray slot and the
orientation of the au Nano IC Card (LTE) tray carefully, and insert the tray
all the way into the slot in the direction of the arrow. Inserting the tray
forcibly may damage the tray.
Common AC adapter 04 (sold separately)/
Common DC adapter 03 (sold separately)
Metal part up
Confirm the position of the au Nano IC Card (LTE) tray slot and the
orientation of the au Nano IC Card (LTE) tray carefully, and insert the tray
all the way into the slot in the direction of the arrow. Inserting the tray
forcibly may damage the tray.
au Nano IC Card (LTE)
◎ Make sure to unplug the microUSB plug of the common AC adapter 04
(sold separately) etc. from the product when attaching or removing the au
Nano IC Card (LTE).
au Nano IC Card (LTE)
tray slot
E Close the au Nano IC Card (LTE)/microSD memory card
cover.
C Slowly pull the microSD memory card straight out.
◎ Inserting the au Nano IC Card (LTE) tray not deeply enough may prevent
the product from functioning properly.
◎ Take care not to lose or damage the removed au Nano IC Card (LTE)
tray.
D Close the au Nano IC Card (LTE)/microSD memory card
cover.
◎ Do not remove the microSD memory card forcefully. Doing so may result
in damage or data loss.
◎ The microSD memory card may become warm after a long time use, but
this is not a fault.
shl24_e_01.fm
[8/27]
午前９時６分
■ Front/Right Side
Protruding edges
au Nano IC Card (LTE)
shl24_e_01.fm
[7/27]
4 ページ
■ Using Disaster Voice Messaging Service
Confirm the orientation for inserting, then insert in the direction of the arrow
until it clicks and is locked.
Releasing the microSD memory card before it is locked may cause it to
pop out.
au Nano IC
Card (LTE) tray
午前９時６分
shl24_e.book
Follow the on-screen instructions for registration/confirmation.
Notches
au Nano IC Card (LTE)
木曜日
The inbox is displayed.
Select a mail to check to display the details of the mail.
Using the au Nano IC Card (LTE)
The au Nano IC Card (LTE) records your personal information such as phone
numbers.
The product is compatible with au Nano IC Card (LTE) only. You cannot use
the product by inserting the au IC-Card, micro au IC-Card or au Micro IC Card
(LTE) for au phones and smartphones instead.
２０１４年１月３０日
◎ To register the safety information, an e-mail address (∼ezweb.ne.jp) is
required. Set the e-mail address in advance.
◎ Deletion of the safety information and configurations for Safety
Notification Mail are not available during wireless LAN (Wi-Fi®)
connection.
◎ The Company does not guarantee the quality of this service. The
Company, regardless of the cause, shall not be liable for any problems
related to registration of safety information due to the concentration of
access to this service or equipment errors, any loss due to the damage,
ruination, etc. of safety information or any loss arising from registered
safety information.
• Purchase a specified charger (sold separately).
• Illustrations of cell phones in this manual are only for reference. They may
look different from the actual product.
area code not required
Tapping “DIAL” and “zero” will connect you to an operator after calling
3 ページ
A From the au Disaster Countermeasure menu, [緊急速報メー
ル] (Emergency Rapid Mail).
•
•
•
•
Before you start using the product, be sure to read the “Notes on Usage”
available on the au homepage to ensure correct use.
Before you assume that the product is malfunctioning, check for possible
remedies in the following au Customer Support site of au homepage:
(http://www.au.kddi.com/english/support/)
Customer Service Center
For general information and charges
You can use the “Instruction Manual application” (Japanese version) on the
product to check detailed operational procedures.
Also, you can activate intended functions from an explanation screen
depending on the functions.
On the home screen, tap [アプリ] (APPS) [[取扱説明書] (Instruction
Manual).
Also, you can use the “Instruction Manual application” (English version) on the
product to check operational procedures.
On the home screen, tap [APPS] [[Basic Manual] after switching the display
language to English (zP.15).
• To use the application for the first time, you need to download and install it by
following on-screen instructions.
午前９時６分
shl24_e.book
shl24_e_01.fm
[9/27]
Charging
Charging
When you purchase the product, the internal battery is not fully charged. Be
sure to charge the internal battery before use.
• If the performance of the battery does not recover (e.g. the usable time after
each charge has become extremely short), the internal battery may be at the
end of service life. On the home screen, tap [APPS] [[Settings] [[Device
info] [[Status] [[Battery status] to check the charging performance of the
internal battery.
• While charging, the charging/incoming indicator illuminates in red, and the
battery icon is displayed with
superimposed. When the battery is
charged to approximately 95%, the charging/incoming indicator illuminates
in green. When charging is finished, the charging/incoming indicator goes
out.
◎ Depending on the operation procedure and usage environment, the
temperature inside the product may get high and the product may even
get heated. In such case, charging may stop for security reasons.
◎ Charging the internal battery while using the camera function etc. may
lengthen the charging time.
◎ If you perform various operations with a specified charger (sold
separately) connected to the product, charging/discharging may take
place repeatedly in a short time. Frequently charging the internal battery
shortens its service life.
◎ If you charge the internal battery when the battery has run out, the
charging/incoming indicator may not illuminate soon. However, charging
is in progress.
◎ If the charging/incoming indicator flashes in red, force the power off
(zP.14) and turn the product on again. If the indicator continues to flash,
stop charging the internal battery and contact an au shop or the Keitai
Guarantee Service Center.
◎ If you stop charging while the charging/incoming indicator still illuminates
during charging, the cell phone may be left not fully charged even if
is displayed on it. In such case, the usage times shorten.
10
shl24_e_01.fm
[10/27]
B Plug the common AC adapter 04 (sold separately) power
plug into a 100 V AC power outlet/Plug the common DC
adapter 03 (sold separately) plug into a cigarette lighter
socket.
◎ If you use the microUSB cable to charge the internal battery, it may take
the internal battery longer to be fully charged than if you use the specified
AC adapter (sold separately).
◎ Turn the protruding side of the microUSB plug down and insert the
microUSB plug to the external connection jack of the product straightly.
Inserting the microUSB plug in the wrong direction may result in damage
to the external connection jack of the product.
◎ The product is turned on when it is connected to a PC while the power is
turned off.
◎ If you charge the internal battery when the battery has run out, the
charging/incoming indicator may not illuminate. In such case, use the
specified AC adapter (sold separately) for charging.
Common AC adapter
04 (sold separately)
C When charging is finished, pull the microUSB plug of the
common AC adapter 04 (sold separately)/common DC
adapter 03 (sold separately) straight out from the external
connection jack of the product.
D Unplug the common AC adapter 04 (sold separately) power
plug from the power outlet/Unplug the common DC adapter
03 (sold separately) plug from the cigarette lighter socket.
◎ Although you can charge the internal battery while the power is turned on,
charging time lengthens.
11
shl24_e_01.fm
[11/27]
Common DC adapter
03 (sold separately)
12
shl24_e_01.fm
[12/27]
13
shl24_e_01.fm
[13/27]
午前９時６分
shl24_e.book
14 ページ
２０１４年１月３０日
木曜日
Turning the Power On/Off
午前９時６分
shl24_e.book
15 ページ
２０１４年１月３０日
木曜日
Turning the Screen On/Off
A f (hold down for at least 2 seconds).
◎ The initial setting of the touch panel will be executed until “AQUOS
PHONE” disappears from the screen after the power is turned on. Do not
touch the screen, otherwise touch panel operations may not be
performed properly.
■ Turning the Power Off
A f (hold down for at least 2 seconds).
16 ページ
２０１４年１月３０日
木曜日
Using the 3-Line Home
If you press f or no operation is made for a specified time, the screen is
turned off.
■ Turning the Power On
午前９時６分
shl24_e.book
■ Turning the Screen On
A f while the screen is turned off.
Switching sheets
■ Restarting the Product
You can restart the product after turning it off.
《Apps Sheet》《Widgets Sheet》
《Shortcuts Sheet》
■ Viewing the 3-Line Home
■ Turning the Power Off Forcibly
You can force the product to turn off if the screen freezes or you are unable to
turn the product off.
A f (hold down for at least 8 seconds).
Description
Missed call
New mail message (E-mail)
New mail message (SMS)
New mail message (PC-mail)
New mail message (Gmail)
Making a call, talking, receiving a call
Call on hold
Answering memo
Space on the internal memory available less than approx. 275
MB
Reading the internal memory/a microSD memory card
Installation of application completed, update available
Software update available
Icons collected
◎ Some icons are displayed with their number superimposed on them.
■ Main Status Icons
《Welcome Sheet (Lock Screen)》
■ Booting in Safe Mode
Turn the product off then boot it in a state close to that at time of purchase.
If operation of the product is unstable, it may be due to applications installed
after purchasing the product. If symptoms improve when booted in safe mode,
uninstalling the applications you installed may remedy symptoms.
A f (hold down for at least 2 seconds).
B Long touch “Power off” [[OK].
“Safe mode” is displayed at the bottom of the screen when the product is
booted in safe mode.
To end safe mode, reboot the product.
◎ When the product is turned off, you can boot it in safe mode by f
(hold down for at least 2 seconds) to turn it on, and then long touching
“d” until the Welcome Sheet (Lock Screen) is displayed after the au
logo disappears.
◎ It is recommended that you back up your data on the product before
booting in safe mode.
◎ Widgets that you yourself created may be deleted.
◎ Safe mode is not a normal state for the product to be booted in. End safe
mode before normal use.
Icon
Slide “
” to the bottom of the screen to unlock.
Tap, long touch or slide “
” up to display “Video tutorial”, “Welcome sheet
setting” and shortcuts.
A Wallpaper
B Owner info key
Tap to display texts according to items set for “Owner info” in “Lock &
Security”.
C Info Area
Flick to the left/right to switch the weather, stock prices information, widgets,
media information and date and time.
Switching the Display Language to
English
You can switch the display language for function names and other items to
English.
A On the home screen, [アプリ] (APPS).
B [設定] (Settings).
C [言語と文字入力] (Language & input).
∼
A Status bar
B Sheet Switcher
Long touch Sheet Switcher, drag it to the destination and release your finger
to move it.
C Apps Sheet/Widgets Sheet/Shortcuts Sheet
D Navigation Bar
E Scroller
Displayed when the screen is scrolled. You can scroll the screen by sliding
the displayed scroller up/down.
F Separator
Pinch out vertically on the home screen to add a separator. You can delete
the separator by pinching it in vertically.
G Social Board
Confirm information for registered SNS.
∼
Description
Time
Battery level
∼
: Battery level display
: No battery
• While charging, the battery icon is displayed with
superimposed.
Airplane mode set
Signal strength (Receiving electric field)
∼
: Level display
: Out of service area
• The icon indicating network is displayed at the upper left.
• During a communication, the icon is displayed with
superimposed.
Manner mode status
: Standard manner mode
: Drive manner mode
: Silent manner mode
During a call using hands-free
Microphone set to “Mute” during a call
Answering memo set
: No Answering memo
: Answering memo (one to
nine entries)
: Answering memo (ten entries)
E [English].
２０１４年１月３０日
木曜日
午前９時６分
shl24_e.book
19 ページ
２０１４年１月３０日
木曜日
Introduction of Peripheral Devices
In the notification/status panel, you can check the details on notification icons
and status icons or activate an application corresponding to the icon.
You can also set the manner mode, VeilView, etc.
午前９時６分
shl24_e.book
A Function buttons
Switch settings of the frequently used function by one touch.
B Function button displaying/hiding bar
Tap it to display/hide function buttons on the second and subsequent
row.
C Music controller
Play music with LISMO.
D Notification area
Check the status of the product and contents of notifications.
Depending on the information, you can pinch out/pinch in to enlarge/
shrink notifications or tap notifications/functions to activate a
corresponding application.
• Flick a notification to the left/right to delete it. You may not be able to
delete a notification depending on the notification.
E Settings key
Tap it to make various settings for the product.
F Rearrange key
Sort function buttons.
G Clear
Tap it to clear all the notifications. You may not be able to delete a
notification depending on the notification.
H Close bar
Slide it up to hide the notification/status panel.
Switching Input Methods
A While the keyboard is displayed, open the notification
panel.
B [Choose input method] [[English (US)]/[Japanese].
■ Arranging the Home Screen
Switching Software Keyboards
A When the top of any sheet of the home screen is displayed,
slide the sheet down.
A On the character entry screen, [
] [[Change input UI]
[[Set QWERTY keyboard]/[Set 12 keyboard].
Alternatively, tap “e” on any sheet.
２０１４年１月３０日
木曜日
午前９時６分
Before you assume that the product is malfunctioning, check the following:
Trouble
Battery usage time is
short.
au Carrying Case F Black
《Notification/Status panel》
20 ページ
Troubleshooting
■ au Carrying Case F Black (0105FCA) (sold separately)
au Carrying Case G Black (0106FCA) (sold separately)
A Slide the status bar down.
You can switch input methods for character entry.
• Following operation explanations use “Japanese - iWnn IME - SH edition”.
◎ A separator cannot be added if there are no applications, etc. between
separators.
D [言語(Language)を選択] (Select language).
18 ページ
Using the Notification/Status Panel
Release your finger after the product vibrates to turn the power off.
◎ If the power is turned off forcibly, unsaved data will be deleted. Do not
turn the power off forcibly unless you cannot operate the product.
午前９時６分
shl24_e.book
■ Main Notification Icons
The Welcome Sheet (Lock Screen) is displayed if you turn the screen on.
B [Reboot] [[OK].
木曜日
Icons
Icon
A f (hold down for at least 2 seconds).
２０１４年１月３０日
The notification icons to notify you of a missed call, a new mail message, a
running operation, etc. are displayed on the left side of the status bar, while the
status icons to show the status of the product are on the right side.
Welcome Sheet (Lock Screen)
B [Power off] [[OK].
17 ページ
Using the Status Bar
The 3-Line Home is a home screen which consists of the Apps Sheet, the
Widgets Sheet and the Shortcuts Sheet. You can use the function by tapping
an icon/a widget/shortcut on each sheet.
• You can switch each sheet by tapping “APPS”, “WIDGETS” or
“SHORTCUTS” on the Sheet Switcher, or sliding/flicking the home screen to
the left/right.
◎ When you put the product in your pocket, bag, etc., turn the screen off.
Putting the product in while the screen is turned on may cause
inadvertent operations.
午前９時６分
shl24_e.book
Cannot make calls.
■ Common AC Adapter 03 (0301PQA) (sold separately)
Common AC Adapter 04 (0401PWA) (sold separately)
Common AC Adapter 03 Navy (0301PBA) (sold separately)
Common AC Adapter 03 Green (0301PGA) (sold separately)
Common AC Adapter 03 Pink (0301PPA) (sold separately)
Common AC Adapter 03 Blue (0301PLA) (sold separately)
AC Adapter JUPITRIS (White) (L02P001W) (sold separately)
AC Adapter JUPITRIS (Red) (L02P001R) (sold separately)
AC Adapter JUPITRIS (Blue) (L02P001L) (sold separately)
AC Adapter JUPITRIS (Pink) (L02P001P) (sold separately)
AC Adapter JUPITRIS (Champagne) (L02P001N) (sold
separately)
Cannot receive calls.
Cannot hear the other
party.
Cannot recognize a
microSD memory card/
Cannot find target data.
Cannot operate the
keys/touch panel.
Cannot charge the
battery.
Common AC adapter 04
• Illustrations and forms may not match depending on the AC adapter you
use.
■ Common DC adapter 03 (0301PEA) (sold separately)
■ Portable charger 02 (0301PFA) (sold separately)
■ microUSB cable 01 (0301HVA) (sold separately)
microUSB cable 01 Navy (0301HBA) (sold separately)
microUSB cable 01 Green (0301HGA) (sold separately)
microUSB cable 01 Pink (0301HPA) (sold separately)
microUSB cable 01 Blue (0301HLA) (sold separately)
◎ For the latest information about available peripheral devices, check the
au homepage (http://www.au.kddi.com/english/) or contact Customer
Service Center.
◎ The product does not support ASYNC/Fax transmission.
◎ The above-mentioned peripheral devices can be purchased from au
Online Shop.
(http://auonlineshop.kddi.com/)
Cannot turn on the
power.
Cannot operate/The
screen does not
respond/Cannot turn off
the power.
Cannot operate the
touch panel as
intended.
Screen response is
slow when you tap on
the screen/press the
keys.
auIC card(UIM) error. is
displayed.
The power is turned off
automatically.
The power is turned off
while the wake-up logo
is displayed.
(out of service area
icon) is displayed.
A message indicating
that charging is
necessary is displayed.
When making a call, a
beeping sound is heard
from the earpiece and
a connection cannot be
established.
B [Home settings].
Detail
• Make sure you do not often use the product in
places where
(out of service area) is
displayed. (zP.17)
• Make sure the internal battery does not
approach the end of its service life. Check the
battery status. (zP.11)
• Is the internal battery charged enough? (zP.11)
• Suspend the functions not being used. (zP.18)
• Is an au Nano IC Card (LTE) inserted? (zP.7)
• Is the power turned on? (zP.14)
• Is reception good enough? (zP.17)
• Is the product within the service area? (zP.17)
• Is the power turned on? (zP.14)
• Is an au Nano IC Card (LTE) inserted? (zP.7)
• Make sure you are not covering the earpiece
with your ear.
Place the earpiece over your earhole.
• Is a microSD memory card inserted properly?
(zP.10)
• Make sure data is not saved on the internal
memory. Data can be saved on the internal
memory besides a microSD memory card.
• Turn off the power and then turn it on.
• Is the power turned on? (zP.14)
• Is the power plug of the specified charger (sold
separately) securely plugged into an outlet or a
cigarette lighter socket? (zP.11)
• Is the internal battery charged? (zP.11)
• Did you hold f down? (zP.14)
• You can force the power off by holding down
f for at least 8 seconds and releasing your
finger after the product vibrates. Turn the
product on again after a while. (zP.14)
• Make sure you are not operating with hands
wearing gloves etc.
• Make sure you are not operating with the tip of a
fingernail or with foreign object between the
screen and your fingers.
• Restart the product. (zP.14)
• Screen response may be slowed down when a
large amount of data is stored in the product or
being transmitted between the internal memory
and a microSD memory card.
• Is an au Nano IC Card (LTE) inserted? (zP.7)
• Make sure the battery has not run out. (zP.11)
• Make sure the battery has not run out. (zP.11)
• Is reception good enough? (zP.17)
• Is the product within the service area? (zP.17)
• Is your hand off the area around the internal
antenna? (zP.7)
• The battery is almost empty. (zP.11)
• Is reception good enough? (zP.17)
• Is the product within the service area? (zP.17)
• The wireless line is busy or the other party is on
another line. Try again later.
If symptoms do not improve after checking each of the above, information is
provided through au Customer Support on the au homepage below.
(http://www.au.kddi.com/english/support/)
shl24_e.book
21 ページ
２０１４年１月３０日
14
木曜日
Updating Software
A On the home screen, [APPS] [[Settings] [[Device info]
[[Software update].
update
Auto-check
settings
22 ページ
２０１４年１月３０日
15
木曜日
Check whether software update is necessary or not.
The confirmation starts when you tap “Yes”. When it is
necessary, you can download data for software update.
Set whether to regularly check presence of data for
software update available.
■ Notes on Software Update
• You are charged for data communication when connecting to the Internet
from the product by using packet communication.
• When software update is necessary, you will be informed on au homepage,
etc. For details, contact an au shop or Customer Service Center (call toll-free
157). In addition, users of the SHL24 will receive a notice from au, when
software update is necessary to improve the functionality of the SHL24.
• It is recommended to back up your data before updating software.
• If the software update is performed, the product will restart before and after
the update.
• If the software update has failed or stopped, perform the same procedures
again.
• If the software update fails, it may become impossible to operate the product.
If this happens, bring it to an au shop or PiPit (not accepted by some shops).
• Charge the battery sufficiently before starting update. If the battery level is
insufficient or the battery runs out during the update, the software update will
fail.
• Check out the signal reception status. The software update may fail if the
product is in a place with bad signal reception status.
• Various data registered on the product (address books, mails, still pictures,
music data, etc.) and information of settings will not be changed even after
software is updated. However, note that data may not be protected
depending on the state of the product (fault, damage, getting wet with water,
etc.).
• After software is updated, the download of next update software may
automatically start (consecutive update).
• The software update is not available during international roaming.
Do not conduct the following operations during the software update
• Do not move during software update.
The following operations are not available during the software update
• Operations are not available during software update. Making a call to 110
(Police), 119 (Fire and Ambulance), 118 (Regional Coast Guard
Headquarters) or 157 (Customer Service Center) is not available either. Also,
the alarm etc. does not function.
shl24_e_01.fm
■ [15/27]
When Asking for Repair
For repair, contact Keitai Guarantee Service Center.
During the
warranty period
Outside the
warranty period
午前９時６分
shl24_e.book
23 ページ
２０１４年１月３０日
16
木曜日
■ After-Sales Service
After-Sales Service
shl24_e_01.fm
The product supports the software update.
[14/27]
B Software
午前９時６分
shl24_e.book
Repairs will be done based on the <> described on the
warranty card.
We shall repair the product for a charge as requested by
the customer if repair renders it usable.
◎ Before handing in the product for repair, make a backup of the contents
of memory since they may disappear during repair. Note that the
Company shall not be liable for any damages and loss of income should
the contents of memory be altered or lost.
◎ Recycled parts that meet the Company’s quality standards are
sometimes used for repair.
◎ au cell phones collected by Replacement cell phone delivery service
which you used before are recycled to cell phones for replacement after
repairs. Also parts replaced by au after-sales service are collected and
recycled by the Company. They are not returned to customers.
■ Performance Parts for Repair
The Company retains performance parts for repair of the SHL24 main unit and
its peripheral devices for 4 years after discontinuation of production.
“Performance parts for repair” refers to parts required for maintaining the
functions of the product.
■ Warranty Card
At the store of purchase, thoroughly check and read the name of the retailer,
date of purchase and other necessary details filled in on the warranty card,
and be sure to keep it in a safe place.
■ Keitai Guarantee Service Plus LTE
An after-sales service membership program on a monthly basis called “Keitai
Guarantee Service Plus LTE” (monthly fee: 380 yen excluding tax) is available
for using your au cell phone for a long time without worries.
This service expands coverage for many troubles including malfunction, theft
and loss. For details of this service, check on the au homepage or contact
Keitai Guarantee Service Center.
◎ You can apply for membership only at the time of purchasing your au cell
phone.
◎ Once you cancel the membership, you cannot reapply for it until you
purchase an au cell phone next time.
◎ Note that when changing the model or purchasing an extra cell phone,
this service only covers the most recently purchased au cell phone.
◎ When an au cell phone is handed over to you or someone else, the “Keitai
Guarantee Service Plus LTE” membership is also handed over to the
successor of the cell phone.
◎ When you get a new au cell phone by changing the model, purchasing
an extra cell phone, etc., the “Keitai Guarantee Service Plus” or “Keitai
Guarantee Service Plus LTE” membership for the old au cell phone is
automatically canceled.
◎ Service contents are subject to change without notice.
■ au Nano IC Card (LTE)
The au Nano IC Card (LTE) is lent to you by au. In case of loss or damage, the
card will be replaced at your expense. When malfunction is suspected, or in
case of theft or loss, contact an au shop or PiPit.
If you are unsure about anything regarding after-sales service, contact the
shl24_e_01.fm
following service counter.
[16/27]
Customer Service Center (for service canceling procedure or operation in
case of loss or theft)
From a fixed-line phone,
0077-7-113 (toll free)
From an au cell phone, 113 without area code (toll free)
Keitai Guarantee Service Center (for loss, theft or damage)
From a fixed-line phone/an au cell phone,
0120-925-919 (toll free)
Business hours 9:00 to 21:00 (7 days a week)
■ au After-Sales Service Information
Service contents
Replacement cell phone
delivery service
(spontaneous failure: 1st year)
Replacement cell phone
delivery service
(spontaneous failure: 2nd year
and later)
Replacement cell phone
delivery service
(partial damage, water soak,
irreparable damage, theft and
loss)
Holding over and repair
(spontaneous failure: 1st year)
Holding over and repair
(spontaneous failure: 2nd year
and later)
Holding over and repair
(partial damage)
Holding over and repair
(water soak and irreparable
damage)
Holding over and repair
(theft and loss)
Keitai Guarantee
Service Plus LTE
member
Non-Keitai
Guarantee Service
Plus LTE member
Free
N/A
Customer charge
1st: 5,000 yen
2nd: 8,000 yen
N/A
Customer charge
1st: 5,000 yen
2nd: 8,000 yen
N/A
Free
Free
Free (three-year
warranty)
Actual cost
Customer charge
Upper limit: 5,000
yen
Actual cost
Customer charge
10,000 yen
Actual cost
N/A
N/A
(By model
replacement)
* All the prices written above exclude tax.
Replacement cell phone delivery service
◎ When you have trouble with your au cell phone, you can have a cell
phone for replacement (same model and color as your old one) delivered
to any destination that you specify by calling us. Please return your old
faulty au cell phone within 14 days after the cell phone for replacement is
delivered to you.
◎ You can use this service up to twice within one year starting from the day
when you first use this service. If you have not used this service over the
past one year at the time of your application for this service, the
application will be regarded as your first time. If you have, the application
will be regarded as your second time.
* For details, check on the au homepage.
Holding over and repair
◎ Damages and malfunctions intentionally caused by the customer as well
as those due to modification (e.g. disassembly, change of parts, painting,
etc.) by the customer are not covered by this service.
◎ You cannot receive a refund for replacement of the outer casing due to
stains, scratches, paint removal, etc. on the outer casing.
午前９時６分
shl24_e.book
24 ページ
２０１４年１月３０日
17
木曜日
Main Specifications
shl24_e_01.fm
Display
Approx. 4.5 inches, approx. 16.77 million colors, IGZO,
[17/27]
1,080×1,920 (FHD)
Weight
Approx. 115 g (including the internal battery)
Size (W×H×D)
Approx. 63 mm×124 mm×9.9 mm (thickest part approx.
10.3 mm)
Memory (built-in) ROM: Approx. 16 GB
RAM: Approx. 2 GB
Continuous talk
Approx. 980 min.
time (in Japan)
Continuous talk
Approx. 620 min.
time (overseas
(GSM))
Continuous
Approx. 510 hours (while LTE is used)
standby time (in
Approx. 610 hours (while 3G is used)
Japan)
Continuous
Approx. 420 min. (LTE on WAN)
tethering time
Approx. 600 min. (3G on WAN)
Maximum Wi-Fi®
10 devices
tethered
connections
Continuous
Approx. 600 hours
standby time
(overseas (GSM))
Charging time
Common AC adapter 04 (sold separately): Approx. 120
min.
Common DC adapter 03 (sold separately): Approx. 260
min.
1Seg continuous
Approx. 8 hours and 00 min. (earphone)
watching time*1
Approx. 7 hours and 30 min. (speaker)
Camera device
Out camera
CMOS image sensor
In camera
CMOS image sensor
Effective pixels
Out camera
Approx. 13.10 million pixels
In camera
Approx. 1.20 million pixels
Bluetooth®
Communication method: Bluetooth® Standard Ver.4.0
function
Output: Bluetooth® Standard Power Class 2
Communication distance*2: Within 10 m with no
obstacles in the range
Compatible Bluetooth® profiles*3: HSP (Headset Profile),
HFP (Hands-Free Profile), A2DP (Advanced Audio
Distribution Profile), AVRCP (Audio/Video Remote
Control Profile) Ver.1.3, OPP (Object Push Profile), SPP
(Serial Port Profile), PBAP (Phone Book Access
Profile)*4, HID (Human Interface Device Profile), HDP
(Health Device Profile), PAN (Personal Area Networking
Profile), PXP (Proximity Profile)*5, FMP (Find Me
Profile)*5, ANP (Alert Notification Profile)*5, PASP (Phone
Alert Status Profile)*5, TIP (Time Profile)*5, DUN (Dial-up
Networking Profile)*6
Frequency bands: 2.4 GHz band
Network
Wireless LAN (Wi-Fi®) function: IEEE 802.11a/b/g/n (2.4
environment
GHz/5 GHz)/ac*7 conformant
Interface
microUSB jack, 3.5φ (quadrupoles) earphone/
microphone jack (supported earphones: tripolar
headphone (Lch/Rch/GND) and quadrupolar earphone
with microphone (Lch/Rch/GND/MIC))
午前９時６分
shl24_e.book
25 ページ
２０１４年１月３０日
18
木曜日
Specific Absorption Rate (SAR) of Cell
Phones
shl24_e_01.fm
[21/27]
22
○ Ministry of Internal Affairs and Communications website:
(http://www.tele.soumu.go.jp/e/sys/ele/index.htm)
○ Association of Radio Industries and Businesses website:
(http://www.arib-emf.org/index02.html)
○ au homepage:
(http://www.au.kddi.com/english/)
○ SHARP homepage:
(http://www.sharp.co.jp/products/menu/phone/cellular/sar/index.html)
*1 Technical regulations are defined by the Ministerial Ordinance Related to the Radio
Law (Article 14-2 of Radio Equipment Regulations).
*2 Regarding the method of measuring SAR when using mobile phones in positions
other than against the ear, international standards (IEC62209-2) were set in March
of 2010.
On the other hand, regarding the technical standards of Japan, ministerial
ordinance to revise part of the Ministerial Ordinance related to Radio Law (Article
14-2 of Radio Equipment Regulations) has been issued in August 2013, and will be
enforced on April 1, 2014.
*1 The 1Seg continuous watching time varies depending on the usage.
*2 It changes according to objects obstructing devices and signal reception.
*3 This is the specification provided in Bluetooth® standards for making
communication between Bluetooth®-compatible devices in accordance with their
intended use.
*4 Some contents of address books data may not be properly displayed on the
device of the other party.
*5 This profile supports Bluetooth® Standard Ver.4.0.
*6 Supported for some car navigation systems only. See the au homepage for usage.
*7 Supported for Wi-Fi CERTIFIED™ ac. Refer to the respective companies’ websites
for information on supported products.
shl24_e_01.fm
[22/27]
23
shl24_e_01.fm
[23/27]
２０１４年１月３０日
19
木曜日
午前９時６分
shl24_e.book
27 ページ
２０１４年１月３０日
20
木曜日
FCC Notice
shl24_e_01.fm
[19/27]
In some countries/regions including Europe, there are restrictions on the
use of 5GHz WLAN that may limit the use to indoors only.
If you intend to use 5GHz WLAN on the device, check the local laws and
regulations beforehand.
Hereby, Sharp Telecommunications of Europe Ltd, declares that this
SHL24 is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the
following Internet address:
(http://www.sharp.co.jp/k-tai/)
shl24_e_01.fm
- This device complies with part 15 of the FCC Rules. Operation is subject to
[20/27]
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
- Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
■ Information to User
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
■ Mobile Light
Do not point the illuminated light directly at someone’s eyes.
Be especially careful not to shoot small children from a very close distance.
Do not use Mobile light near people’s faces. Eyesight may be temporarily
affected leading to accidents.
■ AC Adapter
Any AC adapter used with this handset must be suitably approved with a 5Vdc
SELV output which meets limited power source requirements as specified in
EN/IEC 60950-1 clause 2.5.
■ Battery - CAUTION
Use specified Charger only.
Non-specified equipment use may cause malfunctions, electric shock or fire
due to battery leakage, overheating or bursting.
The battery is embedded inside the product. Avoid removing the embedded
battery since this may cause overheating or bursting.
Do not dispose of the product with ordinary refuse. Take the product to an au
Shop, or follow the local disposal regulations.
Charge battery in ambient temperatures between 5°C and 35°C; outside this
range, battery may leak/overheat and performance may deteriorate.
■ Volume Level Caution
To prevent possible hearing damage, do not listen at high volume
levels for long periods.
However, there is no guarantee that interference will not occur in a particular
installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
1. Reorient/relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
■ 5 GHz WLAN Operation in USA
Within the 5.15-5.25 GHz band, UNII devices are restricted to indoor
operations to reduce any potential for harmful interference to co-channel
Mobile Satellite Services (MSS) operations.
■ FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the
U.S. Government.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
■ Headphone Signal Level
The exposure standard for wireless handsets employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6 W/kg.
The maximum output voltage for the music player function, measured in
accordance with EN 50332-2, is 120 mV.
Highest SAR value:
■ European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR
value for this device when tested at the ear is 0.287 W/kg* and when worn on
the body is 0.274 W/kg*.
For body-worn operation, this mobile device has been tested and meets the RF
exposure guidelines when used with an accessory containing no metal and
positioning the handset a minimum of 1.5 cm from the body. Use of other
accessories may not ensure compliance with RF exposure guidelines.
As SAR is measured utilizing the devices highest transmitting power the actual
SAR of this device while operating is typically below that indicated above. This
is due to automatic changes to the power level of the device to ensure it only
uses the minimum level required to reach the network.
The World Health Organization has stated that present scientific information
does not indicate the need for any special precautions for the use of mobile
devices. They note that if you want to reduce your exposure then you can do
so by limiting the length of calls or using a hands-free device to keep the
mobile phone away from the head.
Model
FCC ID
At the Ear
On the Body
SHL24
APYHRO00201
1.01 W/kg
0.91 W/kg
This device was tested for typical body-worn operations with the back of the
handset kept 1.0 cm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain a 1.0 cm separation
distance between the user’s body and the back of the handset. The use of belt
clips, holsters and similar accessories should not contain metallic components
in its assembly.
The use of accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements, and should be avoided.
The FCC has granted an Equipment Authorization for this model handset with
all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model handset is on file with the FCC and
can be found at (http://transition.fcc.gov/oet/ea/fccid/)under the Display Grant
section after searching on the corresponding FCC ID (see table above).
Additional information on Specific Absorption Rates (SAR) can be found on the
FCC website at (http://www.fcc.gov/encyclopedia/radio-frequency-safety).
* The tests are carried out in accordance with international guidelines for testing.
24
shl24_e_01.fm
[24/27]
26 ページ
CE Declaration of Conformity
shl24_e_01.fm
[18/27]
This model【SHL24】mobile phone complies with Japanese technical
regulations and international guidelines regarding exposure to radio waves.
This mobile phone has been designed in observance of the Japanese
technical regulations regarding exposure to radio waves (*1) and limits to
exposure to radio waves recommended by equivalent international guidelines.
These international guidelines were set out by the International Commission on
Non-Ionizing Radiation Protection (ICNIRP), which is in collaboration with the
World Health Organization (WHO), and the permissible limits include a
substantial safety margin designed to assure the safety of all persons,
regardless of age and health condition. The Japanese technical regulations
and international guidelines define the limits using a unit of measurement
known as the Specific Absorption Rate (SAR), which represents the average
amount of radio frequency energy absorbed by the human head. The SAR limit
for mobile phones is 2.0 W/kg. The highest SAR value for this mobile phone
when tested for use at the ear is 0.473 W/kg. There may be slight differences in
SAR levels among individual products, but they all satisfy the limit. The actual
SAR of this mobile phone while talking on the phone can be well below that
indicated above. This is due to automatic changes in the power level of the
mobile phone to ensure it only outputs the minimum power required to
communicate with a base station. Therefore in general, the closer you are to a
base station, the lower the power output of the mobile phone.
This mobile phone can be used in positions other than against your ear. This
mobile phone satisfies the international guidelines when used with au Carrying
Case F Black (0105FCA) (sold separately)/au Carrying Case G Black
(0106FCA) (sold separately) recommended by KDDI (*2).
In case you are not using the au Carrying Case F Black (0105FCA) (sold
separately)/au Carrying Case G Black (0106FCA) (sold separately), use a
product that contains no metal parts, and one that can hold the mobile phone
at least 1.5 cm away from your body.
The World Health Organization has stated that “a large number of studies have
been performed over the last two decades to assess whether mobile phones
pose a potential health risk. To date, no adverse health effects have been
established as being caused by mobile phone use”. If you would like to know
more detailed information, please refer to the WHO website.
(http://www.who.int/docstore/peh-emf/publications/facts_press/
fact_english.htm)
Please refer to the websites listed below if you would like to know more
detailed information regarding SAR.
◎ The continuous talk time and continuous standby time may drop to less
than half depending on the battery charging status, usage environment
such as temperature, reception condition at the location where the
product is used, and the function settings.
21
午前９時６分
shl24_e.book
25
shl24_e_01.fm
[25/27]
26
shl24_e_01.fm
[26/27]
27
shl24_e_01.fm
[27/27]
午前９時６分
shl24_pl_e.book
0 ページ
２０１４年１月３０日
木曜日
午後３時５５分
shl24_pl_e.book
1 ページ
２０１４年１月３０日
木曜日
午後３時５５分
shl24_pl_e.book
Exemptions
Notes on Usage
* “The Company” as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: SHARP CORPORATION
shl24_pl_e.book
7 ページ
２０１４年１月３０日
木曜日
February 2014, 1st Edition
When inserting an earphone, etc. into the product, adjust the
volume to the proper level. Setting too loud a volume or using the
shl24_e_00_hyo1.fm
~~~~
earphone continuously for a long period of time might
adversely
[0/0]
Instruction
affect your ears. Also, raising the volume too high might prevent
you from hearing sounds around you, which might in turn lead to
a traffic accident at a railroad crossing or pedestrian crossing.
午後３時５５分
shl24_pl_e.book
-18 ページ
２０１４年１月３０日
shl24_e_01.fm
[1/61]
WARNING
Indicates that handling
with wet hands is not
Wet hands allowed.
prohibited
CAUTION
木曜日
Be sure to read the following
warnings before use.
Do not use a cell phone while driving a car or riding a motorbike
or bicycle. Doing so may cause a traffic accident. Use of a cell
Prohibited phone while driving a car or motorbike is prohibited by law. Use
of a cell phone while riding a bicycle may be punishable by some
regulations.
Turn off the product while you are aboard an airplane.
Otherwise, the product may affect electronic devices and safety
Instruction of your flight may be compromised. If your cell phone is permitted
to be used on an airplane, use it appropriately by following
instructions from the airline company. Do not connect the product
with a PC aboard an airplane using the microUSB cable 01 (sold
separately), since the product is automatically turned on.
The product sometimes affects high-precision electronic devices.
So, turn it off near such devices. (Examples of electronic devices
Instruction that might be affected by the product include cardiac
pacemakers, hearing aids, other electronic medical devices, fire
alarms, and automatic doors. If you are using an electronic
medical device, contact the device manufacturer or retailer for
information about the possible effects of radio waves.)
shl24_pl_e.book
-714 ページ
２０１４年１月３０日
木曜日
■ Internal Battery
shl24_e_01.fm
[8/61]
WARNING
(The internal battery of the product is a lithium-ion battery.)
The internal battery is not fully charged at the time of purchase. Charge the
battery before using the product.
Be sure to read the following
hazards before use.
If the liquid leaking from inside gets on your skin or clothes,
immediately rinse it off with water to avoid injury. If the liquid gets
Instruction into your eyes, do not rub but wash your eyes with water, and
immediately consult a doctor to avoid the risk of losing your
eyesight.
The internal battery is a consumable item. If the performance of
the internal battery does not recover (e.g. the usable time after
Instruction each charge has become extremely short), the internal battery is
at the end of service life, so stop using it. Failure to do so might
cause overheating, ignition, rupture or leakage. Since the battery
is built-in type, the product will be kept at an au shop etc. and
charges will be incurred for repair. Also, you may not use the
product in certain period of time. Note that the length of service
life varies depending on the usage condition, etc.
２０１４年１月３０日
木曜日
Be sure to read the following
warnings before use.
Do not use at other voltages than the specified power supply
voltage. Doing so might cause ignition, fire, overheating or
Prohibited electric shock.
• Specified AC adapter (sold separately): 100 V AC to 240 V AC
Do not charge with voltage converter for overseas travel.
• Specified DC adapter (sold separately): 12/24 V DC (for
negative grounded vehicles only)
Firmly insert the power plug of the specified charger (sold
separately) into the power outlet or cigarette lighter socket down
Instruction to the base of its pins. Incomplete insertion of the power plug
might result in electric shock or fire caused by overheating and
ignition. Do not use damaged specified charger (sold separately)
or loose power outlets or cigarette lighter sockets.
If the fuse in the common DC adapter 03 (sold separately) blows,
replace it with a fuse of the specified type (250 V, 1 A). Replacing
Instruction with a different type of fuse might cause overheating or ignition.
(For information about fuse replacement, carefully read the
manual for the common DC adapter 03 (sold separately).)
Do not damage, modify, twist, pull or place a heavy object on the
cable of the specified charger (sold separately). Do not use a
Prohibited damaged cable. Doing so might cause electric shock or short
circuit causing fire or a fault.
Prohibited
If you hear thunder, do not touch the AC adapter. Doing so might
cause an electric shock as a result of a lightning strike.
- 14 -
shl24_e_01.fm
[14/61]
-815 ページ
■ Charger
shl24_e_01.fm
[7/61]
DANGER
午後３時５５
shl24_pl_e.book
午後３時５５分
shl24_pl_e.book
This symbol indicates the possibility
of death or serious injury*1 to a
person.
Disassembly
prohibited
This symbol indicates the possibility
of personal injury*2 to a person or
physical damage*3.
-29 ページ
２０１４年１月３０日
午後３時５５
shl24_pl_e.book
-916 ページ
Wetting
with water
prohibited
Instruction
２０１４年１月３０日
Indicates an action that
must be done.
When the charger is not to be used for a long time, disconnect
Disconnect the charger’s power plug from the power outlet or cigarette lighter
plug from socket. Failure to do so might cause electric shock, fire or a fault.
power outlet
Specified chargers (sold separately) are not waterproof. Never
use in places subject to direct splashing with water, pet urine,
Wetting etc. or in humid places such as a bathroom. Doing so might
with water cause overheating, fire or electric shock. In the event that a
prohibited charger is splashed with liquid, immediately disconnect its power
plug.
Be sure to read the following
hazards before use.
-310 ページ
２０１４年１月３０日
木曜日
Stay alert to your surroundings when calling, messaging,
browsing the Internet, shooting photos, playing games, watching
shl24_e_01.fm
[3/61] TV (1Seg) or listening to music. Failure to do so might cause a fall
Instruction
or traffic accident.
CAUTION
shl24_e_01.fm
[10/61]
Be sure to read the following
cautions before use.
When unplugging the power plug of the specified charger (sold
separately) from the outlet or cigarette lighter socket, hold the
Disconnect charger to do so. If you pull the cable, it might be damaged,
plug from
power outlet causing overheating, ignition or electric shock.
Although the product has waterproof capability, do not use if
liquid such as water gets inside the product from the au Nano IC
Wetting Card (LTE)/microSD memory card cover etc. Continued use of
with water the product in this state might cause overheating, ignition or a
prohibited fault.
Be sure to read the following
warnings before use.
Do not put the au Nano IC Card (LTE) in a cooking apparatus
such as a microwave oven or a pressure vessel. Doing so might
Prohibited cause melting, overheating, fuming, loss of data or a fault.
CAUTION
Instruction
Be sure to read the following
cautions before use.
Be careful not to injure your hand or finger when attaching/
removing the au Nano IC Card (LTE).
２０１４年１月３０日
木曜日
Be sure to read the following
Do not place near corrosive chemicals or in places where
corrosive gas is generated. Doing so might cause a fault or loss
Prohibited of internal data.
Stop use if there is smoke, abnormal odor or noise, excessive
overheating, or other abnormalities. During charging, disconnect
Instruction the specified charger (sold separately) from the power outlet or
the socket, make sure that the product is not overheating before
turning the power off and contact an au shop or Keitai Guarantee
Service Center. Also, if you have dropped or damaged the
product, do not continue to use it in that state, and contact an au
shop or Keitai Guarantee Service Center.
Part
Power
key
shl24_e_01.fm
[5/61]
Display
Camera lens cover
Material
PC resin
Camera lens fringe
ABS resin
Mobile light lens cover
Infrared port cover
PMMA resin
PMMA resin
Reinforced glass
PMMA resin
木曜日
Surface treatment
Acrylic UV cured
coating
Acrylic hard coating
Anti-smudge
coating/AR coating
Acrylic UV cured
coating
None
None
木曜日
None
Prohibited
Silicon rubber
None
POM resin
POM resin
PA resin
None
None
None
PC + ABS resin
External connection jack
au Nano IC Card (LTE)/
microSD memory card cover
(body)
au Nano IC Card (LTE)/
microSD memory card cover
(hinge)
au Nano IC Card (LTE)/
microSD memory card cover
(seal)
au Nano IC Card (LTE) tray
IMEI tray
Earphone/Microphone jack
SUS
PC resin
午後３時５５
shl24_pl_e.book
- 11 18 ページ
２０１４年１月３０日
Prohibited
Prohibited
午後３時５５
When using the product for calling or data communication, do not
keep the product in direct contact with your skin for a prolonged
Prohibited period, or do not cover the product with paper, cloth, bedding,
etc. The product might get hot, causing fire, burns or a fault.
Do not swing the product around by holding the strap etc. Doing
so might cause an accident or damage.
If you have a weak heart, be careful when setting the incoming
vibration and ringtone volume to prevent adverse effects on your
Instruction heart.
木曜日
午後３時５５
shl24_pl_e.book
- 12 19 ページ
２０１４年１月３０日
Prohibited
Do not store the au Nano IC Card (LTE) in dusty places. Doing so
might cause loss of data or a fault.
Do not throw the au Nano IC Card (LTE) into a fire or heat it.
Doing so might cause melting, fuming, loss of data or a fault.
Do not touch the IC (metal) part of the au Nano IC Card (LTE) or
short-circuit it. Doing so might cause loss of data or a fault.
Instruction
Store the au Nano IC Card (LTE) out of reach of small children.
Accidental swallow might cause asphyxiation, injury, etc.
Do not drop the au Nano IC Card (LTE) or subject it to strong
impact. Doing so might cause loss of data or a fault.
Do not fold, bend or place a heavy object on the au Nano IC Card
(LTE). Doing so might cause loss of data or a fault.
- 17 -
- 18 -
木曜日
Do not scratch the IC (metal) part of the au Nano IC Card (LTE).
shl24_e_01.fm
Doing so might cause loss of data or a fault.
[12/61]
Prohibited
Do not store the au Nano IC Card (LTE) in places exposed to
direct sunlight or hot and humid places. Doing so might cause
Prohibited loss of data or a fault.
shl24_e_01.fm
[18/61]
木曜日
Use the product with the au Nano IC Card (LTE)/microSD
memory card cover closed. If the cover is open, dirt or water may
Instruction get inside causing a fault.
Do not use or leave the au Nano IC Card (LTE) in hot places such
as by a fire or a heater. Doing so might cause melting, fuming,
Prohibited loss of data or a fault.
Prohibited
２０１４年１月３０日
The product may become hot by prolonged use especially in
high-temperature environment. Be careful when using the
Instruction product touching your skin for a long time, as it might cause
low-temperature burns.
Do not allow liquids, metal objects, burnable items, and other
foreign matter to get inside the microSD memory card slot. Doing
Prohibited so might cause fire, electric shock or a fault.
Do not disassemble or modify the au Nano IC Card (LTE). Doing
shl24_e_01.fm
Disassembly
[11/61] so might cause loss of data or a fault.
prohibited
Prohibited
-613 ページ
Do not put the product directly on sand at a beach, etc. Sand or
other small particles might get inside the earpiece, mouthpiece,
Prohibited speaker or earphone/microphone jack causing the volume to
drop. If sand gets inside the product, it might cause overheating
or a fault.
Elastomer resin
Back cover
午後３時５５
shl24_pl_e.book
Pay attention to items becoming stuck to the main unit. The
speaker uses magnets, and so thumbtacks, pins, craft knife
shl24_e_01.fm
[6/61] blades, staples, and other metal objects sometimes become
Instruction
stuck to the main unit, and cause unexpected injury.
Do not bring the product close to magnetized objects such as
cash cards, floppy disks, credit cards, and prepaid cards. Doing
Prohibited so might result in loss of recorded information.
Material
PA resin + GF45%
Do not wet the au Nano IC Card (LTE). Doing so might cause loss
Wetting of data or a fault.
with water
prohibited
shl24_e_01.fm
[17/61]
Do not use power outlets or wiring apparatus beyond its rating.
Also, exceeding rating, for example, by connecting multiple
Prohibited devices to a single power strip might cause overheating and fire.
Surface treatment
Acrylic UV cured
coating
Acrylic UV cured
coating
None
Acrylic UV cured
coating
Part
Outer case (side of display)
Use only the devices specified by the Company to insert the au
Nano IC Card (LTE) in. Using a device not specified by the
Instruction Company might cause loss of data or a fault.
For the specified devices, contact an au shop or Customer
Service Center.
- 16 -
２０１４年１月３０日
Be sure to read the following
cautions before use.
Do not touch the product or specified chargers (sold separately)
for a long time while charging. Doing so might cause
Prohibited low-temperature burns.
Do not leave in places within the reach of small children. Small
children might swallow part of the equipment by mistake and
Prohibited choke on them, or might drop them by mistake and cause
accidents or injury.
-512 ページ
午後３時５５分
Do not cover or wrap the product with cloth, bedding, etc. while
using or charging the product. Doing so might cause fire, fault or
Prohibited injury.
If charging is not completed after the specified charging time,
stop charging. Failure to do so might cause leakage of liquid,
Instruction overheating, rupture or ignition.
午後３時５５
shl24_pl_e.book
木曜日
Do not leave on unstable places such as rocky stands or tilting
surfaces especially while the vibration mode is set. Dropping the
Prohibited product may cause injury or damage. Also, pay sufficient
attention to impact, etc.
Do not use outside when you can hear thunder. Doing so might
risk lightning strikes and electric shock.
Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause ignition, rupture or fire by the
Prohibited light-collecting mechanism of the lens.
２０１４年１月３０日
Do not store the product in places subject to direct sunlight (e.g.
in automobiles), places that get hot, places that get extremely
Prohibited cold, and in humid or dusty places. Doing so might cause
overheating, ignition, deformation or a fault.
Do not drop or subject to strong impact, such as throwing. Doing
so might cause rupture, overheating, ignition or a fault.
Never charge the product when it is wet. Doing so might cause
electric shock or short circuit/corrosion causing fire, a fault or
Prohibited burns.
-411 ページ
6 ページ
CAUTION
When using a metal accessory etc., do not allow the metal part to
come in contact with the connection jack or power outlet. Doing
Prohibited so might cause electric shock, ignition, injury or a fault.
午後３時５５
shl24_pl_e.book
午後３時５５分
shl24_pl_e.book
Be sure to read the following
warnings before use.
If the product is damaged because it is dropped or something,
and its display is cracked or internal parts are exposed, do not
Prohibited touch the cracked display or exposed parts with your hands.
Doing so might cause electric shock or injury from damaged
parts. Contact an au shop or Keitai Guarantee Service Center.
■ au Nano IC Card (LTE)
WARNING
Prohibited
木曜日
The materials of parts used on the product are as follows.
Sometimes, very rarely some people demonstrate symptoms
such as temporary muscle spasms, loss of consciousness, etc.
Instruction by watching repeatedly flickering screens. Those with a past
history of this should consult with a physician beforehand.
２０１４年１月３０日
WARNING
２０１４年１月３０日
Do not short-circuit the external connection jack and the
earphone/microphone jack. Do not allow conductive foreign
Prohibited objects (metal fragments, pencil leads, etc.) to come into contact
with or get inside a jack. Doing so might cause fire or a fault.
CAUTION
Do not light the mobile light toward a driver of a car, motorbike or
bicycle. If dazzled by the light, the driver might become unable to
Prohibited drive and cause an accident.
- 10 17 ページ
5 ページ
Do not let your hands, fingers and other parts of the body touch
the external connection jack or earphone/microphone jack. Doing
Prohibited so might cause electric shock, injury or a fault.
Do not throw the product into a fire or heat it. Doing so might
cause ignition, rupture or fire.
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
Instruction depending on your physical constitution and condition.
Do not point the illuminated light directly at someone’s eyes. Be
especially careful not to shoot small children from a very close
Prohibited distance. Do not use Mobile light near people’s faces.
Eyesight may be temporarily affected leading to accidents.
午後３時５５分
shl24_pl_e.book
Prohibited
shl24_e_01.fm
cautions before use.
[4/61]
Use of the main unit in an automobile might sometimes affect
on-vehicle electronic devices, though this rarely happens. If this
Prohibited happens, do not use since this may impair safe travel.
Do not send data by infrared communication with the infrared
port pointing toward eyes. Doing so might affect eyes. Also,
Prohibited sending data with the infrared port pointing toward some other
infrared device might cause false operation, etc.
午後３時５５
shl24_pl_e.book
木曜日
The customer is not allowed to disassemble, modify or repair the
product. Doing so might cause a fault, ignition, electric shock, or
Disassembly injury. The Company is not liable even in the event of any
prohibited nonconformities arising on the product or peripheral devices as a
result of modification, etc. Modification of the product is in
violation of the Radio Law.
Do not use, store or leave the product in hot places (e.g. by the
fire, near a heater, under a kotatsu, in direct sunlight, in a car in
Prohibited the hot sun). Doing so might cause ignition, rupture, fault, fire or
injury.
午後３時５５分
shl24_pl_e.book
２０１４年１月３０日
Do not put the product in a cooking apparatus such as
microwave oven or a pressure vessel. Doing so might cause
Prohibited leakage of liquid, ignition, rupture, fault, fire or injury.
Be sure to use only the specified peripheral devices. Use of other
peripheral devices might cause overheating, ignition, rupture,
Instruction fault, or leakage of liquid.
木曜日
Place the common DC adapter 03 (sold separately) where it does
not hinder driving or safety equipment such as airbags. Failure to
Instruction do so might cause a traffic accident. Place the common DC
adapter 03 (sold separately) following the instructions of its
manual.
Do not plug in or unplug the specified charger (sold separately)
Wet hands with wet hands. Doing so might cause electric shock or a fault.
prohibited
Indicates that
disassembly is not
allowed.
4 ページ
Before entering an area where flammable gas is generated such
as a gas station, be sure to turn off the product. Do not charge
Instruction the battery. Failure to observe these precautions might cause the
gas to catch fire. In addition, when using Osaifu-Keitai® payment
function at a gas station, be sure to turn off the power in advance.
(If Osaifu-Keitai® has been locked, cancel the lock before turning
off the power.)
Indicates that use in a
place where the
product is likely to get
wet or allowing the
product to get wet is not
allowed.
Indicates that the power
plug must be
Disconnect disconnected from the
plug from
power outlet power outlet.
DANGER
木曜日
Wipe off dust on the power plug. Failure to do so might cause fire,
burns or electric shock.
shl24_e_01.fm
[16/61]
午後３時５５分
shl24_pl_e.book
■ Precautions Common to the Main Unit, Charger, au
Nano IC Card (LTE), Peripheral Devices
Before cleaning the specified charger (sold separately), unplug
shl24_e_01.fm
its power plug from the outlet or cigarette lighter socket. If the
[9/61] plug remains plugged in when you clean the charger, it might
Disconnect
plug from
power outlet cause electric shock or short circuit causing fire or a fault.
Instruction
木曜日
Prohibited
When using the product near an implanted pacemaker,
implanted cardioverter-defibrillator or other electronic medical
shl24_e_01.fm
[2/61] device, radio waves might affect these units and devices. So,
Instruction
please observe the following.
1. Those with an implanted pacemaker or implanted
cardioverter-defibrillator should carry or use the product at
least 15 cm away from where the implant is.
2. Change to Airplane mode on the product beforehand or turn
the product off before entering a place where it may not be
possible to maintain a distance of 15 cm, such as where
movement is restricted, since there may be people with a
cardiac pacemaker or implanted cardioverter-defibrillator
nearby.
3. Pay attention to the following points when using the product
inside medical institutions.
• Do not bring the product into operating theaters,
intensive-care units (ICU) and coronary care units (CCU).
• Turn the product off in hospital wards. Do not connect the
product with a PC in hospital wards using the microUSB
cable 01 (sold separately), since the product is automatically
turned on.
• Even if you are in a lobby, etc., be sure to turn the product off
when there are electronic medical devices nearby.
• When a medical institution has laid down designated areas
where use of the product is prohibited or is not allowed to be
brought in, abide by the instructions of that medical
institution.
4. When using electronic medical devices other than an
implanted pacemaker and implanted cardioverter-defibrillator
outside a medical institution (e.g. home medical treatment),
check individually with the manufacturer of the electronic
medical device regarding the influence of radio waves.
- 15 -
shl24_e_01.fm
[15/61]
This symbol indicates the potential
and imminent danger of death or
serious injury*1 to a person.
WARNING
Be careful not to have the product bitten by your pet.
Failure to do so might cause leakage, overheating, rupture or
Instruction ignition of the internal battery.
When small children use the equipment, have the guardian teach
them the proper handling procedures so as to avoid potential
Instruction dangerous situations. In addition, check that they are using the
equipment as directed during use. Failure to do so might cause
injury etc.
Indicates an action that
is not allowed.
■ Explanation of Indications Used in This Manual
DANGER
２０１４年１月３０日
■ Explanation of Graphic Symbols Used in This Manual
Prohibited
Do not puncture the product with a nail, hit it with a hammer or
step on it.
Prohibited Doing so might cause leakage, overheating, rupture or ignition of
the internal battery.
When using a charger or external device, insert/remove the
connector straight to/from the jack. Make sure the orientation of
Instruction the connector is correct. Failure to do so might cause damage or
a fault.
3 ページ
These “Safety Precautions” describe instructions that should be observed to
prevent damage to property or injury to the customer or others using the
product.
These instructions are divided into the following categories.
Be sure to read the following
hazards before use.
DANGER
午後３時５５分
shl24_pl_e.book
■ Before using the product, thoroughly read these safety
precautions for proper use. After reading, store the precautions
in a safe place.
■ Main Unit
When adjusting the volume with an earphone, etc. inserted into
the product, raise the volume a little at a time. If you raise the
Instruction volume too much from the outset, sudden loud noise from the
earphone, etc. might adversely affect your ears.
木曜日
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-temperature),
electric shock, broken bones, injuries with residual aftereffects from
poisoning, etc., and injuries requiring hospital admission for
treatment or long-term hospital attendance as an outpatient.
*2 Injury: This refers to injuries, burns (high- and low-temperature), electric shock,
etc. that do not require hospital admission for treatment or long-term
hospital attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture, livestock
or pets.
◎ Reproduction of the content of this manual in part or in whole is
prohibited.
◎ The content of this manual is subject to change without notice.
◎ Every effort has been made in the preparation of this manual. Should you
notice any unclear points, omissions, etc., feel free to contact us.
• In this manual, the “AQUOS PHONE SERIE mini SHL24” is abbreviated as
the “SHL24” or the “product”.
• In this manual, “microSD™ memory card (commercially available)”,
“microSDHC™ memory card (commercially available)” and “microSDXC™
memory card (commercially available)” are abbreviated as “microSD
memory card” or “microSD”.
• For illustrations and descriptions in this manual, refer to “Basic Manual”
available on the au homepage and on the product.
２０１４年１月３０日
Safety Precautions (Observe Strictly)
• The Company is not liable for any damages arising from earthquakes,
lightning, storms, floods or other natural disasters, as well as fires, actions by
third parties, other accidents, intentional or mistaken operation by the
customer, or use under other unusual conditions outside the responsibility of
the Company.
• The Company is not liable for any incidental damages (change/
disappearance of saved content, loss of business income, disruption of
business, etc.) arising from use of or inability to use the product.
It is recommended that you keep a copy of important phone numbers etc.
• The Company is not liable for any damages arising from failure to observe
the described content of this manual.
• The Company is not liable for any damages arising, for example, from
malfunction caused by combination with connected devices or software not
related to the Company.
• Captured image data or downloaded data may sometimes be altered or lost
due to faults, repair or other handling of the product. The Company is not
liable for any damage or lost income resulting from recovery of these data.
• It is recommended you keep a copy of important data in your PC’s hard disk,
etc. Whatever the cause of fault or malfunction may be, the Company
assumes no responsibility for alteration or loss of saved information.
Be sure to read this manual before use
2 ページ
午後３時５５
shl24_pl_e.book
２０１４年１月３０日
木曜日
Handling Precautions
shl24_e_01.fm
These
precautions are provided to ensure that performance can be fully
[13/61]
demonstrated.
Thoroughly read these precautions to ensure correct use.
■ Precautions common to the main unit, internal battery, charger,
au Nano IC Card (LTE), peripheral devices
● Do not apply excessive force to the product during use. Be sure not to put
the product into a tightly packed bag or place a heavy object on the product
in a bag. Sitting on the product in your pocket might damage the display or
internal circuit board resulting in a malfunction.
Keeping an external device connected to the external connection jack might
damage the connector resulting in a malfunction. Such damage and
malfunction are not covered by the warranty, even if there is no external
damage.
● To ensure waterproof property (equivalent to IPX5 and IPX7) of the product,
use the product with the au Nano IC Card (LTE)/microSD memory card
cover tightly closed.
Note that the waterproof property is not guaranteed in every usage
condition. Do not allow water to get inside the product or splash water on
the charger or optional accessories. Do not open/close the au Nano IC Card
(LTE)/microSD memory card cover in the rain or with water drops on the
surface of the product. Doing so might cause water intrusion resulting in
internal corrosion.
Malfunctions determined to be caused by water intrusion are not covered
by the warranty.
● Do not use the product in extremely hot, cold or humid places. (Use within
an ambient temperature range of 5°C to 35°C and humidity range of 35% to
85%.)
• Charger
• Conversion cables
- 19 -
shl24_e_01.fm
[19/61]
- 13 20 ページ
- 20 -
shl24_e_01.fm
[20/61]
午後３時５５
shl24_pl_e.book
21 ページ ２０１４年１月３０日
木曜日
● Do not use the product in extremely hot, cold or humid places. (Use within
an ambient temperature range of 5°C to 35°C and humidity range of 35% to
85%. Using at a temperature of 36°C to 40°C is allowed only when you use
the product temporarily.)
• SHL24
• au Nano IC Card (LTE) (inserted into the SHL24)
● Do not use in places subject to lots of dust or vibration.
● Clean the product with a soft dry cloth (such as the type used for
eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The
display may be stained if splash or smear is left attached to the surface.
Wiping the product using alcohol, thinner, benzene, detergent, etc. might
erase the printing on the outer casing or cause discoloration.
● Use as far away as possible from fixed-line phones, TVs and radios. Use
nearby might affect them.
● The product may become warm while charging or during other operations,
depending on the situation, but this is not abnormal.
● When the temperature of the product gets high during use, the product may
temporarily lower the screen brightness or may stop part of its functions to
protect the main unit.
shl24_pl_e.book
- 21 - ２０１４年１月３０日
28 ページ
午後３時５５
shl24_pl_e.book
22 ページ
２０１４年１月３０日
■ Main unit
● Do not forcefully press, tap or intentionally subject the display to strong
impact. Doing so might cause scratching or damage.
● Do not forcefully press sharp objects or hard objects against keys or display
surface. Doing so might cause scratching or damage.
The touch panel is designed to be lightly touched by fingers. Do not apply
strong pressure with your fingers or sharp-pointed objects (such as
ballpoint pens and pins) on the touch panel.
In the following cases, the product may not respond to touching the touch
panel, or errors in operation may occur.
• Operation with gloved hands
• Operation with fingernails
• Operation with a foreign object placed on the touch panel
• Operation with a protective film or sticker on the touch panel
• Operation with water drops left or condensation formed on the surface
• Operation with wet or sweaty fingers
• Operation under water
● Never use modified au cell phones. Use of a modified device violates the
Radio Law.
You can perform the following operations to confirm the unique
authentication and standard marks (including certification/authentication
numbers) for the product.
On the home screen, tap [APPS] [[Settings] [[Device info]
[[Authentication].
The product has acquired the certification of conformity with technical
regulations for the specified radio station based on the Radio Law and
certification of conformity with technical regulations for the terminal based
on the Telecommunications Business Law, and the “Technical Conformity
Mark
” can be confirmed in the product as a certificate. Confirm
contents of electrical certificates in the product for information on
certification.
If the screws of the product are removed and modifications are made to the
internal components, the certification of conformity with technical
regulations will become invalid. Never use the product without the valid
certification. Doing so violates the Radio Law.
木曜日
午後３時５５
shl24_pl_e.book
- 22 29 ページ
２０１４年１月３０日
■ Camera
■ Copyrights and rights of portrait
● When using the camera, follow common rules of etiquette regarding camera
shl24_e_01.fm
use.
[21/61]
● Image data might be altered or lost due to malfunction, repair or
mishandling of the product. The Company takes no responsibility for
recovery of altered or lost data, damages resulting from altered or lost data,
and lost profits.
● When photographing important occasions (such as a wedding), take a trial
shot and check the shot image to make sure it is correctly shot.
● Do not use the camera for recording commercially available books or
information of which photographing is not allowed.
● Do not leave the camera lens exposed to direct sunlight. Imaging elements
might be discolored or burnt.
● If the data you shot or recorded using the product or the data you
shl24_e_01.fm
downloaded from the Internet etc. is in part or in whole protected by the
[22/61]
third party’s copyright, you are not allowed to copy, distribute, publicly
send, modify the data without consent of the copyright holder, except for
personal use, under the copyright law.
In addition, do not use or modify portraits or names of other individuals
without their consent, as it may infringe on rights of portrait.
Note that shooting and recording might be restricted at some live
performances, shows and exhibitions even for personal use.
● Be careful about the copyright and portrait right when posting still pictures
you shot, etc. on Internet homepages.
■ Music, videos and TV (1Seg)
● Please back up important content recorded or downloaded to the product
to an outside source. Content recorded to memory on the product
sometimes disappears or is altered by unexpected factors, such as static
electricity or a fault, or by repair, mishandling, etc.
● Do not listen to music, watch videos or TV (1Seg) while driving a car or
motorbike, or riding a bicycle. Use of cell phones while driving a car or
motorbike is prohibited by law. (Use of cell phones while riding a bicycle
may also be punishable by law.) In addition, stay alert to the traffic around
you even when walking. Surrounding sounds might not be heard clearly,
and gazing at the screen may distract your attention causing a traffic
accident. Be especially careful at railroad crossings, station platforms and
pedestrian crossings.
● Take care not to listen at ear-splitting volume for a long time, as it might
affect hearing.
● Be careful of sound leakage from earphones in trains or other places with
many people around you.
木曜日
午後３時５５
shl24_pl_e.book
23 ページ
２０１４年１月３０日
木曜日
● To prevent unlawful modification, the product has been designed so that it
cannot be easily disassembled. Modifying the product is prohibited by the
Radio Law.
● Contents saved in the product, such as contacts, mails and bookmarks
might be altered or lost by an accident, fault, repair or mishandling. Be sure
to keep a copy of important contents. Note that the Company assumes no
responsibility for any damages or lost profits resulting from altered or lost
contents.
● Note that content data (both charged or free content) saved on the product
cannot be returned to the customer when the product is replaced for repair
of a fault, for example.
● The product uses liquid crystal for its display. The display response speed
may become slow when the ambient temperature is low, which is due to the
property of liquid crystal and not a malfunction. The display response speed
will return to normal at room temperature.
● Although the display used on the product is made using high-precision
technology, some pixels (dots) might be lit or out at all times. This is not a
malfunction.
● Take care not to inconvenience people around you when you use the
product in a public place.
● You are recommended to store copies of individual data such as still
pictures/videos you took and music in your PC by sending each file as mail
attachment, etc. Note, however, that you may not be able to make copies of
some copyrighted data even by the above-mentioned means.
● Take care not to place magnetized items such as magnetic cards, speakers
and TV sets near the product, as it might cause malfunction.
Putting strong magnetism close to the product might cause false operation.
● When you put the product in your pocket or bag, take care so that the
display does not come in contact with metal objects or other hard objects,
as it might cause scratching or damage. Also, be careful not to scratch or
damage the display by using a strap whose metal or other hard part comes
in contact with the display.
木曜日
午後３時５５
shl24_pl_e.book
- 23 30 ページ
２０１４年１月３０日
Security Codes
The product has various security codes that you can use.
The available security codes are as follows. Do not forget the various security
codes that are set as they are necessary for various operations and contracts.
■ Security code
Initial value
* How to make backups: Store important data such as phonebook data, music,
shot still pictures and videos on external memory devices such as a microSD
memory card or PC. You can also send files as mail attachment or transfer to
your PC. Note, however, that there are some data that cannot be copied by using
these means.
A To do remote operation of voice mail and call
forwarding services from a landline phone
B To use Customer Service Center and to do various
inquiries, applications, and modifications on the au
homepage
A four digit number chosen by the customer and
noted on the application form
Initial value
午後３時５５
shl24_pl_e.book
- 24 31 ページ
２０１４年１月３０日
２０１４年１月３０日
木曜日
■ Touch panel
● Use your finger to operate the touch panel. Do not use ballpoint pens,
pencils or other sharp-pointed objects. Using such objects does not only
hinder correct operation of the touch panel, but also might cause scratching
or damage to the display.
● Do not put stickers or sheets (e.g. commercially available protective films,
peep prevention sheets) on the display. Doing so might hinder correct
operation of the touch panel.
● Operating the touch panel with fingernails might result in split nails or
jammed fingers.
● If the display surface is dirty or wet with sweat or water, it may not function
correctly. In such case, wipe the display surface with a dry, soft cloth.
● When carrying the product in your pocket or bag, take care not to put the
touch panel close to metals or other conductive materials, as it might cause
false operation of the touch panel.
午後３時５５
shl24_pl_e.book
- 25 32 ページ
２０１４年１月３０日
Notes on Waterproof Property
shl24_e_01.fm
Before
using the product, thoroughly read the contents of “Notes on
[25/61]
Waterproof Property” to ensure correct use. Failure to follow the contents
described in these sections may cause intrusion of water, sand or other foreign
material, resulting in overheating, ignition, electric shock, injury or fault.
Proper operations of the product are not guaranteed in every possible
condition during actual use. Faults determined, after an inspection, to be
caused by mishandling by the customer such as by using the product without
following the contents written on “Notes on Waterproof Property” are not
covered by the warranty.
■ Waterproof Property of the Product
午後３時５５
shl24_pl_e.book
26 ページ
２０１４年１月３０日
木曜日
午後３時５５
shl24_pl_e.book
27 ページ
２０１４年１月３０日
木曜日
■ Internal battery
■ Charger
● Use in very hot or cold environments, for example, when left in an
automobile with the windows closed in summer, will cause the internal
battery capacity to drop and shorten the available battery usage time. This
will also shorten the internal battery’s service life. Try to use the internal
battery as much as possible at room temperature.
● The internal battery gradually discharges after charging even if the product
is not used. The internal battery may discharge completely after long time
no use. Charge before using the product.
● Because the internal battery performance or service life will become low, do
not store the product in the following conditions.
• Battery level is full (soon after charging is complete)
• Battery level is empty (to the extent that the product is not powered on)
• In extremely hot or humid conditions
● Charge the battery before using the product for the first time after purchase,
or if you have not used the product for a long time.
● The internal battery is a consumable item. If the performance of the internal
battery does not recover after charge, the internal battery is at the end of
service life, so stop using it. Since the battery is built-in type, the product will
be kept at an au shop etc. and charges will be incurred for repair. Also, you
may not use the product in certain period of time. Note that the length of
service life varies depending on the usage condition, etc.
● Internal batteries sometimes swell up as they approach the end of their
service life depending on the usage condition.
This is due to the properties of lithium-ion batteries, and is not a problem in
terms of safety.
● When not using the specified charger (sold separately), remove its power
plug from the power outlet or the cigarette lighter socket.
● Do not wrap the power cord of the specified charger (sold separately)
around the power plug. Doing so might cause electric shock, overheating or
fire.
● Do not forcibly bend the charger’s plug or the connection between the
connector and power cord. Doing so might cause electric shock,
overheating or fire.
● Do not use the common DC adapter 03 (sold separately) with the car engine
stopped. Doing so might result in draining of the car battery.
木曜日
*1 IPX5 means that the cell phone continues to function as a phone after being
subjected to a water jet (approximately 12.5 liters/min) discharged from a water
pouring nozzle (inner diameter: 6.3 mm), from all directions and approximately 3
meters away from the cell phone for at least 3 minutes.
*2 IPX7 means that the cell phone continues to function as a phone after being gently
lowered into a tank filled with still tap water (at room temperature) to the depth of 1
meter, immersed at the bottom for approximately 30 minutes and then taken out of
the tank.
◎ When the PIN code is locked, the product may restart for the security
reasons.
To prevent unauthorized use of the au Nano IC Card
(LTE) by third parties
1234
25 ページ
The product has a protection rating (JIS C 0920) for waterproof property
equivalent to IPX5*1 and IPX7*2 on the condition that the au Nano IC Card
(LTE)/microSD memory card cover is securely closed (Based on the
experiments by the Company).
The product does not have dustproof property.
In case PIN code is locked, you can unlock it by entering PUK code.
• PUK code is an eight-digit number given at the time of purchase, which is
printed on the back side of the plastic card on which your au Nano IC Card
(LTE) is attached.
• After entering PUK code, you need to set a new PIN code.
• If PUK code is incorrectly entered ten times consecutively, contact an au
shop, PiPit or Customer Service Center.
• “PIN code” is not reset by initializing the product.
To set and release restriction on voice calls, etc.
1234
午後３時５５
shl24_pl_e.book
● Do not cover the light sensor with your finger or put a sticker on it. Doing so
may hinder the light sensor from detecting the ambient brightness and
functioning correctly.
● Do not put a sticker, etc. on the proximity sensor. Doing so may cause the
sensor to malfunction and make the display always turned off while making
a call or during a call.
● If the display gets damaged, immediately stop use and contact an au shop
or Keitai Guarantee Service Center. Keeping using it may cause injury.
● Putting a sticker, etc. on the display or a key may cause malfunction or
shortened usage time. Also, doing so may damage the product.
● If you put magnetized objects, metal straps, etc. close to the product, the
speaker section sometimes emits sounds. This is not a fault.
● Note that if you forcefully pull the au Nano IC Card (LTE)/microSD memory
card cover or apply excessive force on it, it may be damaged.
● Bright places such as under the direct sunlight sometimes make it hard to
see the display. This is not a fault.
木曜日
shl24_e_01.fm
■ [24/61]
PIN Code
To prevent unauthorized use of the au Nano IC Card (LTE) by a third party, you
can set the product to require PIN code entry every time the power is turned
on. You also need to enter PIN code when setting whether PIN code entry is
required.
If PIN code is incorrectly entered three times consecutively, the PIN code will
be locked. You can unlock the PIN code using PUK code.
• PIN code is “1234” and PIN code entry is set to not be required at the time of
purchase. You can change PIN code to any four- to eight-digit number, and
set PIN code entry to be required as necessary.
■ PIN code
Example of usage
木曜日
■ PUK Code
■ Security key
Example of usage
Initial value
２０１４年１月３０日
PIN
Available Security Codes
■ Back up content on the product
24 ページ
● When suddenly brought into a warm place from a cold place, or when in a
humid location, or when used where temperature suddenly changes (e.g.
near the air discharge port of an air conditioner), water drops (i.e.
condensation) sometimes are formed inside the product. Note that when
used under conditions such as this, humidity might cause corrosion or a
fault.
● When wiping the display, wipe with a soft, dry cloth. Use of a moistened
cloth, glass cleaner or other similar liquid might cause a fault.
● When connecting/disconnecting an external device to/from the external
connection jack or earphone/microphone jack, make sure to insert/remove
the connector or earphone plug of the external device straight to/from the
jack.
● Note that applying unnecessary force with an external device connected to
the external connection jack or earphone/microphone jack may cause
damage.
● Do not discard the product together with regular trash. Please cooperate in
the collection of the product when it is no longer needed to protect the
environment and effectively use resources. Old products are collected at au
shops and other places.
● Insert only a microSD memory card into the microSD memory card slot on
the product.
● Do not exert excessive force when attaching/removing a microSD memory
card. Doing so might injure your hands or fingers.
● While writing/reading data to/from a microSD memory card, do not subject
the product to vibration or impact or turn off the power. Doing so might
cause loss of data or a fault.
● When hearing the other party's voice, make sure that the earpiece is placed
at the center of your ear. If the earpiece (audio output port) is closed by the
ear lobe, it may be hard to hear the voice.
● Even if you cover the mouthpiece to make your voice inaudible to the other
party, the other party can hear your voice.
● When using handsfree call, take care to keep the speaker at a safe distance
from your ears, as the speaker volume may be too loud.
木曜日
shl24_e_01.fm
[23/61]
Example of usage
午後３時５５
shl24_pl_e.book
午後３時５５
shl24_pl_e.book
- 26 33 ページ
２０１４年１月３０日
■ au Nano IC Card (LTE)
● The au Nano IC Card (LTE) is lent to you by au. In case of loss or damage,
the card will be replaced at your expense. When malfunction is suspected,
or in case of theft or loss, contact an au shop or PiPit.
● Do not forcibly remove or insert the au Nano IC Card (LTE). Be careful not to
exert excessive force when inserting the card into your au cell phone.
● You are responsible for any damage caused by inserting your au Nano IC
Card (LTE) into some other IC card reader/writer, etc.
● Keep the IC (metal) part of your au Nano IC Card (LTE) clean. Wipe the card
with a dry, soft cloth (such as for cleaning eyeglasses) for cleaning.
● Do not put stickers, etc. on the au Nano IC Card (LTE).
木曜日
午後３時５５
shl24_pl_e.book
- 27 34 ページ
２０１４年１月３０日
木曜日
■ Waterproof property of the product enables you
■ Notes on Using the Product
• To talk on the product in the rain without an umbrella (with a precipitation of
shl24_e_01.fm
20 mm/hour or smaller).
[26/61]
• To use the product at the poolside. However, do not get it wet with water
other than tap water such as water in the swimming pool or submerge it in
water in the swimming pool.
• To wash the product with the low-pressure water flow of a tap water (6 liters/
min or lower) at the room temperature (5°C to 35°C).
• Do
not let the product get wet with or submerged into the following liquids.
shl24_e_01.fm
･ [27/61]
Water containing soap, detergent or bath powder
･ Seawater or water from a swimming pool
･ Hot spring, hot water, etc.
• If the product gets wet with seawater, water from a swimming pool, soft drink,
etc. or dust, sand, mud, etc. is attached on the product, immediately wash it
away with fresh and tap water at room temperature (5°C to 35°C). When it
gets dry and coagulated on the product, the stains get hard to get rid of and
may cause fault.
• Using the product without completely washing sand or mud away may cause
fault such as scratches and damages on the product.
• Do not immerse the product in a bathtub or swimming pool. Also, do not use
it under water. (including key operations.)
• The product is not designed to withstand high water pressure. Do not expose
the product to a strong water flow with tap water, shower, etc. (6 liters/min or
more) or submerge it under water.
• To prevent condensation, wait until the product reaches room temperature
before you bring it from a cold place into a warm place. If condensation
occurs, leave it in room temperature until the condensation is removed.
• Do not get the product wet with hot water, use it in saunas or expose it to hot
air from hair dryer etc.
• Do not place the product where it gets extremely hot or cold such as near a
stove or in a refrigerator.
• Volumes may temporarily become lower due to water entering in the
earpiece, mouthpiece and speaker. Drain water and dry the product well
before use.
■ Handling the product
• Close the au Nano IC Card (LTE)/microSD memory card cover securely.
Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between
contact surface may cause intrusion of water.
• If liquid such as water is splashed onto the product with the au Nano IC Card
(LTE)/microSD memory card cover opened, the liquid may seep inside and
cause electric shock or fault. Stop using it, turn off the power and then
contact an au shop near you or Keitai Guarantee Service Center.
• When the product is wet, wipe it with a dry and clean cloth.
• When your hand or the product is wet, never open/close the au Nano IC Card
(LTE)/microSD memory card cover.
• The product is resistant to fresh and tap water at room temperature (5°C to
35°C) only. If you let the product get wet with or submerged into the liquids
other than fresh and tap water at room temperature, stop using it and wash it
with fresh and tap water at room temperature.
• Do not use the earphone jack/external connection jack when the jack is wet
or sand or dust is attached to it. Doing so may cause impairment of the
waterproof property or cause electric shock, short circuit, etc. resulting in a
fault, burns or fire.
午後３時５５
午後３時５５
■ Lock No. (NFC/Osaifu-Keitai lock)
Example of usage
Initial value
shl24_pl_e.book
- 28 - ２０１４年１月３０日
35 ページ
木曜日
• When water drops are attached on the touch panel or you perform touch
operations with your hand wet, the product may not properly function.
shl24_e_01.fm
• The product does not float on water.
[28/61]
• Do not use the product in heavy rain.
• Do not leave the product wet. Doing so may let the liquids freeze on the
product in cold places or otherwise cause fault.
• Do not drop or otherwise subject the product to strong impact or jab the
earpiece, mouthpiece, speaker, etc. with a sharp object. Doing so may
cause scratching, deformation, etc. on/of the product, resulting in impairment
of waterproof property.
• Do not place the product directly on sand at a beach, sandbox, etc. or on
mud. Grains of sand may get into the earpiece, speaker, etc., causing the
volume to drop.
• If the au Nano IC Card (LTE)/microSD memory card cover degrades or is
damaged, the waterproof property cannot be maintained. In such case,
contact an au shop near you.
午後３時５５
shl24_pl_e.book
- 29 36 ページ
２０１４年１月３０日
木曜日
午後３時５５
shl24_pl_e.book
- 30 37 ページ
２０１４年１月３０日
木曜日
午後３時５５
shl24_pl_e.book
- 31 38 ページ
２０１４年１月３０日
■ Maintaining the Waterproof Property
■ Washing the Product
■ Draining Water
shl24_e_01.fm
■ Rubber
seal
If any
stain, dust, sand, soft drink, etc. is attached to the surface of the product,
shl24_e_01.fm
gently
wipe it off with a cloth and wash the product under a mild water flow (up
[30/61]
to 6 liters/min) of tap water at room temperature (5°C to 35°C) approximately
10 cm away from the faucet or shower head.
Hold the au Nano IC Card (LTE)/microSD memory card cover so that it does
not open, and wash the product with your hands without using a brush or
sponge. After washing the product, drain water off and then use the product.
• Make sure that the au Nano IC Card (LTE)/microSD memory card cover is
securely closed before washing the product.
• Do not wash the product with a washing machine or an ultrasound bath.
• The earphone/microphone jack section and external connection jack section
are especially subject to stain such as dust or sand adhesion. Wash away
stain carefully so as not to keep it remaining in the sections. Also, after
washing it away, make sure the sections get sufficiently dried off before using
the product. Using the product with sand or water drops remaining in the
jack sections may cause fault.
• When cleaning the earphone/microphone jack section and external
connection jack section, do not use tools such as a cotton swab or jam a
cloth into the jack sections. Doing so may cause impairment of waterproof
property etc., resulting in a fault, burns or fire.
• Never put the product in a microwave oven for drying it. Doing so may cause
the internal battery to leak liquid, overheat, rupture or ignite. Also, doing so
may cause the product to overheat, emit smoke, ignite or cause destruction
of circuit components.
• Do not expose the product to hot air from a hair dryer or leave it in a high
temperature environment for drying it. Doing so may cause the product to
deform, discolor, get out of order, etc.
If the
product gets wet, make sure to drain water remaining in the “earphone/
shl24_e_01.fm
microphone
[31/61]jack section”, “external connection jack section”, “earpiece
(receiver) section”, “mouthpiece (microphone) section”, “speaker section”,
“key section”, etc.
The[29/61]
rubber seal on the au Nano IC Card (LTE)/microSD memory card cover is
important to maintain the waterproof property. Be sure to observe the following
items.
• Do not remove or scratch it.
• When closing the au Nano IC Card (LTE)/microSD memory card cover, do
not get the rubber seal caught. Also, do not insert sharp objects into gaps
around the au Nano IC Card (LTE)/microSD memory card cover or the
earphone/microphone jack section or external connection jack section.
Doing so may damage the rubber seal and cause intrusion of water.
• It is recommended to replace the parts for maintaining the waterproof
property (pay service) once every two years regardless of whether any
abnormality is present. For information on part replacement, contact an au
shop near you.
■ Precautions on Charging
Specified charger (sold separately) and optional accessories are not
waterproof. Be sure to check the following items before and after charging.
• Check that the product is not wet. If it is wet or after it gets wet, drain water
well and wipe remaining water off with a clean dry cloth etc. before inserting
the microUSB plug into the external connection jack.
• Never charge the battery if the product is wet. Doing so may cause electric
shock, short circuit, etc., resulting in fire, a fault or burns. Be sure to dry the
product before use.
• Do not touch the specified charger (sold separately) with wet hands. Doing
so may cause electric shock.
• Do not splash water onto the specified charger (sold separately) or optional
accessories when using the equipment. Do not use the equipment in places
where water is regularly used such as a bathroom, shower room, kitchen and
lavatory. Doing so may cause fire or electric shock.
- 35 -
shl24_e_01.fm
[35/61]
To use the NFC/Osaifu-Keitai lock
1234
- 36 -
shl24_e_01.fm
[36/61]
午後３時５５
shl24_pl_e.book
- 32 39 ページ
２０１４年１月３０日
B Hold the product securely and shake it approximately 20
times until there is no more water splashing.
shl24_e_01.fm
木曜日
Make sure of the safety around you and shake the product while holding it
[32/61]
securely not to let it drop.
午後３時５５
shl24_pl_e.book
- 33 40 ページ
２０１４年１月３０日
木曜日
午後３時５５
shl24_pl_e.book
- 34 41 ページ
Water, if any, remaining in the product may ooze up after wiping off.
Do not wipe off water remaining in the grooves directly by a cotton swab
etc.
■ Precautions to be taken after water draining
If a strap is attached, dry it sufficiently as well.
Key section
C Wipe off water remaining in the grooves of each section by
gently putting the product against a dry and clean cloth
etc.
External
Mouthpiece
connection (Microphone)
jack section section
Do not use the product with water drops still left on it.
• Doing so may cause call disruption or cause clothes or bags to get wet.
• Doing so may cause the earphone/microphone jack, external connection
jack, etc. to short-circuit, causing fire or a fault.
• Doing so in a cold region may cause a fault due to water drops freezing.
Since water is sometimes left in the grooves of each section, clear them of
water by putting a cloth against their openings and gently patting them.
Make sure that there is no more water or foreign objects remaining in
them.
Speaker section
Earphone/Microphone
jack section
- 38 -
shl24_e_01.fm
[38/61]
２０１４年１月３０日
D Lay out a dry cloth etc. beneath and leave the product on
the cloth at room temperature for approximately 2 to 3
shl24_e_01.fm
hours to dry it.
[34/61]
shl24_e_01.fm
[33/61]
Earpiece (Receiver)
section
A Wipe off water on the surface of the product carefully with
a dry and clean cloth etc.
- 37 -
shl24_e_01.fm
[37/61]
木曜日
- 39 -
shl24_e_01.fm
[39/61]
- 40 -
shl24_e_01.fm
[40/61]
- 41 -
shl24_e_01.fm
[41/61]
木曜日
午後３時５５
shl24_pl_e.book
42 ページ ２０１４年１月３０日
木曜日
午後３時５５
shl24_pl_e.book
43 ページ
２０１４年１月３０日
木曜日
Precautions about Bluetooth®
Notes on Using Bluetooth®/Wireless LAN
(Wi-Fi®) Functions
Frequency Band
Bluetooth® and wireless LAN (Wi-Fi®) functions (2.4 GHz band) of the product
use frequencies in the 2.4 GHz band ranging from 2.402 GHz to 2.480 GHz.
You can perform the following operations to confirm information on frequency
band.
On the home screen, tap [APPS] [[Settings] [[Device info]
[[Authentication].
• Bluetooth® function: 2.4FH1/XX4
• The Bluetooth® function of the product conforms to the domestic standards
of Japan and FCC standards and EC directives, and has been certified.
• The 2.4 GHz band used by wireless LAN (Wi-Fi®) and Bluetooth® devices is
shared by various other devices. For this reason, Bluetooth® devices use
technologies for minimizing effects from other devices using the same radio
frequency band. In some cases, however, the communication speed and
connectable range may be decreased, or disconnection may occur, due to
interference by other devices.
• The communication speed and connectable range vary depending on the
distance between communication devices, obstacles and the Bluetooth®
devices used.
The frequencies used by the Bluetooth® function of the product are in the 2.4
GHz band. In this frequency band, in addition to home electrical appliances
such as microwave ovens and industrial, scientific and medical devices, other
similar wireless stations, in-plant wireless stations for mobile unit identification
that require a license for use such as factory production lines, specific small
power wireless stations that do not require licenses, and amateur wireless
stations (collectively called “other wireless stations” from here on) are
operated.
1. Before using the product, make sure that “other wireless stations” are not in
operation nearby.
2. In the event that instances of radio wave interference have occurred
between the product and “other wireless stations”, immediately either
relocate the product or stop operation of the device (stop emission of radio
waves).
3. If you are unclear on any points or are troubled by anything, contact an au
shop or Customer Service Center.
The product uses the 2.4 GHz band.
DS-SS and OFDM are used as the modulation schemes. The interference
distance is about 40 m or less.
Bands of mobile unit identification devices can be avoided.
Channels available with the 2.4 GHz band wireless LAN (Wi-Fi®) of the
product are between 1 to 13.
Available channels differ depending on the country.
For use in airplane, check with the airline company in advance.
shl24_pl_e.book
- 42 - ２０１４年１月３０日
49 ページ
木曜日
• FeliCa is a contactless IC card technology developed by Sony Corporation.
FeliCa is a registered trademark of Sony Corporation.
shl24_e_01.fm
•
is a registered trademark of FeliCa Networks, Inc.
[42/61]
• Twitter and Twitter logo are trademarks or registered trademarks of Twitter,
Inc.
• Facebook is a registered trademark of Facebook, Inc.
• “mixi” is a registered trademark of mixi, Inc.
• Google, Google logo, Android, Android logo, Google Play™, Google Play
logo, Google+, Google+ logo, Gmail™, Gmail logo, Calendar logo, Google
Maps™, Google Maps logo, Google Chrome™, Google Chrome logo, Google
Voice Search™ logo, YouTube and YouTube logo are trademarks of Google
Inc.
• GREE and the GREE logo are registered trademarks of GREE, Inc. in Japan.
All other trademarks are the property of their respective owners.
• LINE is a trademark of LINE Corporation.
• Rovi, G-GUIDE, G-GUIDE MOBILE and G-Guide related logos are
trademarks or registered trademarks of Rovi Corporation and/or its
subsidiaries in Japan.
• For DTS patents, see (http://patents.dts.com). Manufactured under license
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS Sound is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
午後３時５５
shl24_pl_e.book
- 43 50 ページ
２０１４年１月３０日
• Copyright © 2010 - Three Laws of Mobility. All Rights Reserved.
shl24_e_01.fm
[43/61]
• The “RSA Secure” AND “Genuine RSA” logos are trademarks of RSA Data
Security, Inc.
44 ページ
２０１４年１月３０日
２０１４年１月３０日
• “ベールビュー/VeilView”, “ベストセレクトフォト”, “笑顔フォーカスシャッ
ター”, “振り向きシャッター”, “NightCatch/ナイトキャッチ”, “AQUOS/アクオ
shl24_e_01.fm
ス” and the “AQUOS” logo, “AQUOS PHONE” and the “AQUOS PHONE”
[44/61]
logo, “セリエミニ/SERIE mini”, “AV家電リンク”, the “エコ技” symbol, “アウ
トドアビュー”, “ワンタッチシャッター”, the “SHSHOW” logo, “Bright Keep”,
“Sweep ON”, “Shake OFF”, “Social Board”, “パーソナルコレクトボード/
Personal Collect Board”, “ウェルカムシート/Welcome Sheet”, “3ラインホー
ム/3-Line Home”, 「書」
“
メモ”, “アナザービュー/Another View”, “パストック/
Passtock”, “IGZO”, “LCフォント/LCFONT” and the LC logo symbol are
registered trademarks or trademarks of Sharp Corporation.
• PhotoScouter® is a registered trademark of Morpho, Inc.
• iWnn of OMRON SOFTWARE Co., Ltd. is used for conversion methods for
Japanese language, and for phrase prediction methods for English.
iWnn © OMRON SOFTWARE Co., Ltd. 2008-2014 All Rights Reserved.
iWnn IME © OMRON SOFTWARE Co., Ltd. 2009-2014 All Rights Reserved.
• The font type pre-installed in this product, Shin Go M, is licensed by
Morisawa Inc. solely for the use with this product.
“Morisawa” and “Shin Go” are registered trademarks or trademarks of
Morisawa Inc.
• Portions Copyright ©2004 Intel Corporation
• aptX is a registered trademark of CSR plc.
• The product includes pictograms that SHARP CORPORATION is licensed by
NTT DOCOMO, INC.
• TRENDMICRO, VirusBuster are trademarks of Trend Micro Inc.
- 49 - ２０１４年１月３０日
56 ページ
木曜日
午後３時５５
shl24_pl_e.book
―― MEMO ――
shl24_e_01.fm
[49/61]
木曜日
午後３時５５
shl24_pl_e.book
- 45 52 ページ
２０１４年１月３０日
- 50 57 ページ
２０１４年１月３０日
木曜日
午後３時５５
shl24_pl_e.book
―― MEMO ――
shl24_e_01.fm
[50/61]
- 51 58 ページ
２０１４年１月３０日
This product includes software developed by the OpenSSL Project for use in
the OpenSSL Toolkit. (http://www.openssl.org/)
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
―― MEMO ――
shl24_e_01.fm
[51/61]
２０１４年１月３０日
木曜日
- 52 59 ページ
２０１４年１月３０日
47 ページ
２０１４年１月３０日
木曜日
午後３時５５
shl24_pl_e.book
48 ページ
２０１４年１月３０日
Intellectual Property Rights
■ Trademarks
Notes on Applications
• Be sure to check the security of the application, then install it at your own risk.
Some applications might cause virus infection, damage various data, and
send out your location information, usage history or personal information
stored in your cell phone via the Internet.
• The Company assumes no responsibility for any problems that might be
caused by applications you have installed. In such case, you may be
charged a repair fee even during the warranty period.
• The Company assumes no responsibility for any disadvantage brought to
you or any third party by applications you have installed.
• Insertion of a microSD memory card is necessary to use some applications.
• Some applications keep the screen turned on while they are active, or rapidly
drain the battery while running in the background.
• Operation procedures and screen appearances of the applications
preinstalled in the product and those installed by you are subject to change
without notice as a result of version upgrade. In addition, operation
procedures described in the “Basic Manual” available on the au homepage
and on the product, “Notes on Usage” (this manual) or “Setting Guide”/“Full
Instruction Manual” (Japanese) available on the au homepage may differ
from the actual procedures.
木曜日
午後３時５５
shl24_pl_e.book
- 46 53 ページ
２０１４年１月３０日
The company names and product names appearing in this manual are
trademarks or registered trademarks of their respective holders.
• The microSD logo, microSDHC logo and microSDXC logo are trademarks of
SD-3C, LLC.
• The Bluetooth® word mark and logo are registered trademarks owned by the
Bluetooth SIG, Inc., and SHARP CORPORATION is licensed to use these
trademarks.
木曜日
午後３時５５
shl24_pl_e.book
- 47 54 ページ
２０１４年１月３０日
■ More
Theshl24_e_01.fm
software installed on this product or part of it may not be altered,
translated/adapted,
reverse-engineered, decompiled or reverse-assembled
[47/61]
and any such actions are prohibited.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Under the MPEG-4 Visual Patent Portfolio License, customers have licensed
permission for the following use of this product to engage in non-profit
personal use. Other uses are not permitted.
• Recording MPEG-4 Visual standard video (henceforth referred to as MPEG-4
Video)
• Playing back MPEG-4 Video that a customer engaged in personal and
non-profit activities has recorded
• Playing back MPEG-4 Video obtained from a provider licensed by MPEG-LA
The names of operating systems (Japanese versions) used in this manual are
as follows.
• Windows 8 is the abbreviation for Microsoft® Windows® 8, Microsoft®
Windows® 8 Pro and Microsoft® Windows® 8 Enterprise.
• Windows 7 is the abbreviation for Microsoft® Windows® 7 (Starter, Home
Basic, Home Premium, Professional, Enterprise, Ultimate).
• Windows Vista is the abbreviation for Microsoft® Windows Vista® (Home
Basic, Home Premium, Business, Enterprise, Ultimate).
• Windows XP is the abbreviation for Microsoft® Windows® XP Professional
operating system and Microsoft® Windows® XP Home Edition operating
system.
木曜日
午後３時５５
shl24_pl_e.book
- 53 60 ページ
２０１４年１月３０日
When using for promotion, in-house use, profit use, and other intended uses,
contact MPEG LA. LLC.
• This product is licensed under the AVC patent portfolio license for the
personal and noncommercial use of a consumer to (i) encode video in
compliance with the AVC standard (henceforth referred to as AVC video)
and/or (ii) decode AVC video that was encoded by a consumer engaged in a
personal and noncommercial activity and/or was obtained from a video
provider licensed to provide AVC video. No license is granted or shall be
implied for any other use. Additional information may be obtained from MPEG
LA, L.L.C.
Visit (http://www.mpegla.com)
• This product is licensed under the VC-1 Patent Portfolio License for the
personal and noncommercial use of a consumer to (i) encode video in
compliance with the VC-1 standard (henceforth referred to as VC-1 video)
and/or (ii) decode VC-1 video that was encoded by a consumer engaged in
a personal and noncommercial activity and/or was obtained from a video
provider licensed to provide VC-1 video. No license is granted or shall be
implied for any other use. Additional information may be obtained from MPEG
LA, L.L.C.
Visit (http://www.mpegla.com)
木曜日
午後３時５５
shl24_pl_e.book
―― MEMO ――
shl24_e_01.fm
[53/61]
- 54 61 ページ
２０１４年１月３０日
―― MEMO ――
shl24_e_01.fm
[54/61]
” is a trademark of BUFFALO INC.
• The official name for Microsoft® Windows® is Microsoft® Windows®
Operating System.
• Microsoft®, Windows®, Windows Vista®, Microsoft® Excel®, Microsoft®
PowerPoint®, Windows Media® and Exchange® are trademarks or registered
trademarks of Microsoft Corporation in the U.S.A. and other countries.
• Microsoft® Word and Microsoft® Office are product names of Microsoft
Corporation in the U.S.A.
• QR code is a registered trademark of DENSO WAVE INCORPORATED.
木曜日
Copyright
© 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
shl24_e_01.fm
This[46/61]
product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)
■ Windows Notations
• Wi-Fi Direct™ is a trademark of Wi-Fi Alliance®.
• “
午後３時５５
shl24_pl_e.book
- 48 55 ページ
２０１４年１月３０日
木曜日
午後３時５５
shl24_pl_e.book
- 55 62 ページ
２０１４年１月３０日
For
inquiries, call:
shl24_e_01.fm
[55/61]
Customer
Service Center
(toll free)
From au cell phones:
area code not required
Tapping “DIAL” and “zero” will connect you to an operator after calling
“157” on your au cell phone.
For service canceling procedure or operation in case of loss or
theft (toll free)
From fixed-line phones:
From au cell phones:
area code not required
In case above numbers are not available, call toll-free:
0120-977-033 (except Okinawa)
0120-977-699 (Okinawa)
Keitai Guarantee Service Center
For loss, theft or damage
(toll free)
From fixed-line phones/au cell phones:
0120-925-919
Business hours: 9:00 to 21:00 (7 days a week)
Cell phone and PHS operators collect and recycle
unused telephones, batteries and battery
chargers at stores bearing the
logo regardless
of brand and manufacturer to protect the
environment and reuse valuable resources.
shl24_e_01.fm
[56/61]
shl24_e_01.fm
[57/61]
- 58 -
shl24_e_01.fm
[58/61]
- 59 -
shl24_e_01.fm
[59/61]
- 60 -
shl24_e_01.fm
[60/61]
- 61 -
shl24_e_01.fm
[61/61]
木曜日
午後３時５５
This product is licensed under the MPEG-4 Visual Patent Portfolio License for
the personal and non-commercial use of a consumer to (i) encode video in
shl24_e_01.fm
compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii)
[48/61]
decode MPEG-4 Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a licensed
video provider. No license is granted or implied for any other use. Additional
information may be obtained from MPEG LA. See (http://www.mpegla.com).
This product is licensed under the MPEG-4 Systems Patent Portfolio License
for encoding in compliance with the MPEG-4 Systems Standard, except that an
additional license and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media which is paid for
on a title by title basis and/or (ii) data which is paid for on a title by title basis
and is transmitted to an end user for permanent storage and/or use. Such
additional license may be obtained from MPEG LA, LLC. See (http://
www.mpegla.com)for additional details.
From fixed-line phones:
- 57 -
午後３時５５
• Wi-Fi Protected Setup™ and Wi-Fi Protected Setup logo are trademarks of
Wi-Fi Alliance®.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
For general information and charges
- 56 -
木曜日
• Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
The product and its accessories may be subject to the Japan Export
Administration Regulations (“Foreign Exchange and Foreign Trade Law” and
its related laws). In addition, U.S. Re-export Regulations (Export Administration
Regulations) may apply to the product and its accessories. To export and
re-export the product and its accessories, take the required measures on your
responsibility and at your expenses. For details on the procedures, contact the
Ministry of Economy, Trade and Industry or the U.S. Department of Commerce.
* Packet communication charge does not apply to wireless LAN (Wi-Fi®).
―― MEMO ――
shl24_e_01.fm
[52/61]
午後３時５５
shl24_pl_e.book
Export Administration Regulations
【Original SSLeay License】
Copyright © 1998-2009 The OpenSSL Project. All rights reserved.
午後３時５５
shl24_pl_e.book
46 ページ
• Since constant Internet connection is possible with the product, packet
communication may be performed automatically by some applications,
resulting in high packet communication charges. Therefore, subscription to
the flat-rate/discount service for packet communication charges is
recommended.
• To browse homepages, download applications, communicate using
applications, send/receive e-mails and configure various settings,
connection to the Internet is required, to which packet communication
charge applies.
• The
product includes software based on GNU General Public License (GPL),
shl24_e_01.fm
GNU
Lesser General Public License (LGPL) and other licenses.
[45/61]
For details on licenses of related software, on the home screen, tap [APPS]
[[Settings] [[Device info] [[Legal information] [[Open source
licenses].
• Source codes of software based on GPL, LGPL and Mozilla Public License
(MPL) can be referred to on the following site for free. For details, refer to the
following site.
(https://sh-dev.sharp.co.jp/android/modules/oss/)
木曜日
午後３時５５
shl24_pl_e.book
Notes on Packet Communication Charge
■ Open Source Software
■ OpenSSL License
• DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
Sharp Corporation has acquired DLNA certification for the device.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners.
木曜日
◎ Connections between the product and all other Bluetooth® and wireless
LAN (Wi-Fi®) devices have not been confirmed. Therefore, connections
with all Bluetooth® and wireless LAN (Wi-Fi®) devices are not guaranteed.
◎ The product supports security features for wireless communications that
are compliant with the Bluetooth® and wireless LAN (Wi-Fi®) standard
specifications, but the security may not be sufficient depending on the
usage environment and configuration. Be careful when making data
communication using Bluetooth® or wireless LAN (Wi-Fi®) function.
◎ Wireless LAN (Wi-Fi®) has the advantage that it can be freely connected
anywhere within the radio wave range, as it uses radio waves for
exchanging information. At the same time, there is a risk that a malicious
third party may obtain unauthorized access if security settings have not
been configured. You are recommended to configure security settings
before using wireless LAN (Wi-Fi®) at your decision and responsibility.
◎ The Company assumes no responsibility for leakage of data or
information that may occur during Bluetooth®/wireless LAN (Wi-Fi®)
communication.
◎ Since Bluetooth® and wireless LAN (Wi-Fi®) functions use the same
frequency band, using the both functions at the same time may cause
radio wave interference resulting in decreased communication speed or
disconnection from the network. If connection fails, stop using either of
the Bluetooth® and wireless LAN (Wi-Fi®) functions.
The frequencies used by the wireless LAN (Wi-Fi®) function of the product are
in the 2.4 GHz and 5 GHz band. In the 2.4 GHz frequency band, in addition to
home electrical appliances such as microwave ovens and industrial, scientific
and medical devices, other similar wireless stations, in-plant wireless stations
for mobile unit identification that require a license for use such as factory
production lines, specific small power wireless stations that do not require
licenses, and amateur wireless stations (collectively called “other wireless
stations” from here on) are operated.
1. Before using the product, make sure that “other wireless stations” are not in
operation nearby.
2. In the event that instances of radio wave interference have occurred
between the product and “other wireless stations”, immediately either
relocate the product or stop operation of the device (stop emission of radio
waves).
3. If you are unclear on any points or are troubled by anything, contact an au
shop or Customer Service Center.
- 44 51 ページ
２０１４年１月３０日
In the 5 GHz frequency band, three channels of 5.2 GHz/5.3 GHz/5.6 GHz
band (W52/W53/W56) are available.
• W52 (5.2 GHz band/36, 40, 44, 48 ch)
• W53 (5.3 GHz band/52, 56, 60, 64 ch)
• W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
ch)
Making a communication with 5.2 GHz/5.3 GHz band (W52/W53) outdoors is
prohibited by the Radio Law.
■ 2.4 GHz band wireless LAN (Wi-Fi®) precautions
午後３時５５
shl24_pl_e.book
45 ページ
■ 5 GHz band wireless LAN (Wi-Fi®) function precautions
• The wireless LAN (Wi-Fi®) function of the product conforms to the domestic
standards of Japan, FCC standards and EC directives, and has been
certified.
• Do not use the product in places where electromagnetic waves are
generated or near electric products, AV and OA equipment, or other
magnetized devices.
• Subjecting the product to magnetic or electrical noise might increase noise
and prevent it from performing communications. (The product is particularly
susceptible to noise when it is used near a microwave oven.)
• Using the product near a TV, radio or similar appliance might cause
reception interference and disrupt TV images.
• Searching might not be successful if there are multiple wireless LAN (Wi-Fi®)
access points near the product and the same channel is being used.
木曜日
午後３時５５
shl24_pl_e.book
【OpenSSL License】
• “Chaku-uta”, “Chaku-uta full” and “Chaku-uta full plus” are registered
trademarks of the Sony Music Entertainment (Japan) Inc.
shl24_pl_e.book
木曜日
Precautions about Wireless LAN (Wi-Fi®)
■ Bluetooth® function precautions
The product uses the 2.4 GHz band.
FH1 uses FH-SS as the modulation scheme. The interference distance is
about 10 m or less.
XX4 uses other schemes. The interference distance is about 40 m or less.
Bands of mobile unit identification devices cannot be avoided.
• Wireless LAN (Wi-Fi®) function: 2.4DS/OF4
午後３時５５
shl24_pl_e.book
Sold by: KDDI CORPORATION,
OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: SHARP CORPORATION
shl24_e_02_hyo4.fm
[62/62]
~~~~
木曜日
午後３時５５
AS87_e_設定ガイド.fm
1 ページ
２０１４年１月２９日
水曜日
午後３時２９分
Basic Operations
Please read this manual first
Describes names of parts and basic operations.
Initial Settings
■ STEP1: Using Google Location Service
Set for using Google’s location service.
■ STEP2: Profile Settings
Set information such as your phone number and mail address.
■ STEP3: Google Account Settings
Set up a Google account for using services such as Google Play and
Gmail.
■ STEP4: auかんたん設定 (au Easy Setting)
Set an au ID etc. to use various services provided by au.
E-mail Settings and Changing E-mail Address
Enter the password [[
Set for using E-mail (@ezweb.ne.jp). An e-mail address is set
automatically in the initial settings. You can change the e-mail
address set in the initial settings.
Setting Guide
Making/Receiving Calls
].
You can make/receive a call.
Confirm the contents [[
[Not now].*2
Enter the question and answer for
protecting security and the
recovery email address [[ ].
10
11
].
Transferring and Backing Up Data
You can transfer/back up your data.
Infrared Communication
You can send/receive data with devices which support the infrared
communication function.
Thank you for buying the “AQUOS PHONE SERIE mini SHL24”
(simply called the “product” from here on).
This manual describes the settings and precautions for using the
product. For detailed descriptions of various functions, refer to the
“Instruction Manual application” (Japanese version) that can be
used on the product.
Reducing Battery Consumption
You can switch the setting of “function buttons” to reduce the battery
consumption.
* For illustrations and descriptions in this manual, refer to “Basic
Manual” available on the au homepage and on the product.
* The company names and product names appearing in this manual
are trademarks or registered trademarks of their respective holders.
Confirm the contents [[
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: SHARP CORPORATION
February 2014, 1st Edition
].
[Done].
[Yes]/[No].
*1 If you already have a Google account, tap [Existing].
*2 Tap [Join Google+] to join Google+.
■ STEP4: auかんたん設定 (au Easy Setting)
When using the product
● The battery is built into the product, and cannot be removed by the customer.
● To force the power off, hold f down for 8 or more seconds (Release your finger after the product vibrates to turn the power off).
Basic Operations
You can use various services provided by au such as au Smart Pass and “au Simple Payment Service” in which you can purchase
applications displayed on Google Play by setting an au ID.
au ID
Register your au phone number or any other characters as an au ID. The same “au ID” as another user’s cannot be
registered.
au ID password
Register the password for using your au ID.
● Alternatively, on the home screen, tap [APPS] [[au Easy Setting] to set up.
For detailed operations, refer to the “Instruction Manual application” (Japanese version) that can be used on the product.
● When the display language is Japanese, on the home screen, tap [アプリ] (APPS) [[取扱説明書] (Instruction Manual).
You can switch the display language for function names and other items to English.
● On the home screen, tap [アプリ] (APPS) [[設定] (Settings) [[言語と文字入力] (Language & input) [[言語(Language)を選択]
(Select language) [[English].
A Display
Touch it directly with your fingers to operate.
Tap/Double tap
Long touch
Tap: Gently touch the
screen and then
immediately release
your finger.
Double tap: Tap the
same position twice.
Keep touching an
item etc. with your
finger.
Slide/Drag
Flick
While your finger is
gently touching the
screen, an item, etc.,
trace it to the desired
direction or position.
Touch the screen and
then quickly move
(flick) your finger up,
down, right or left.
[Next].
Confirm the contents [[OK].
[Registration].
[au IDの設定・保存]
(Set/Save au ID).
Pinch
Touch the screen with
two fingers and widen
(pinch-out) or narrow
(pinch-in) the fingers’
distance.
B ^ (Back key): Tap it to return to the previous screen.
C # (Home key): Tap it to display the home screen.
D $ (Recent Apps key): Tap it to display Quick Launcher. Long touch it to display
the notification/status panel.
E e (Menu key): Tap it to display available functions (menus).
F f (Power key): Hold it down to turn the power on.
Unlock
Unlock by sliding
down.
■ Character Input Method
You can switch input methods for character entry.
While the keyboard is displayed, open the notification panel [[Choose input method]
[[English (US)]/[Japanese].
● Following operation explanations use “Japanese - iWnn IME - SH edition”.
You can enter characters by flick input or tapping keys repeatedly. Tap “
Enter the password [[利用規
約に同意して新規登録] (Agree
with the terms of service and
register newly).*2
Enter the security code
[[OK].*1
[設定画面へ] (Go to the setting
screen).*3
Enter your date of birth, the
secret question and its answer
[[入力完了] (Finish entering).
10
11
12
” to switch the input modes.
Flick input
《Character entry screen (12 Key)》
[設定] (Set).
By touching a key, the candidates that can be entered by flick input are displayed as shown on the right. By
flicking the key in the direction of a desired character being displayed, the character is entered in the
character entry area.
13
[終了] (End).
[Next].
Confirm the contents and follow
the on-screen instructions
[[Agree, and next]*4/[Next].
14
15
16
Initial Settings
The Google location service screen and initial settings screen are displayed automatically when you turn the power of the product on for the
first time. Follow the on-screen instructions to set each function.
■ STEP1: Using Google Location Service
Use Wi-Fi and mobile network location*1
Set whether to obtain location information by using Wi-Fi® or mobile network.
Let Google apps access your location*2
Set whether to use GPS-obtained location information with Google applications.
*1 Alternatively, on the home screen, tap [APPS] [[Settings] [[Location services] and slide [OFF]/[ON] in [Access to my location] to the right/left to
set up (“Wi-Fi & mobile network location” is enabled/disabled).
*2 Alternatively, set by the following operation. On the home screen, tap [APPS] [[Google Settings] [[Location] and follow the on-screen instructions.
Confirm the contents and follow Confirm the contents and follow
the on-screen instructions
the on-screen instructions
[[Agree, and next]/[Next].
[[Agree, and next]/[Next].
Confirm the contents
[[Activate].*5
[Finish].
*1 The default value is the four-digit security code you wrote on the application form.
*2 Tap “お好きなau IDを新規登録したい方はこちら” (For registering any au ID) to register a new au ID with other than au phone numbers. Tap “au ID
をお持ちの方はこちら” (For using the au ID you already have) to set the au ID you have already had.
*3 au ID registration is complete. Next, set the information for reissuing the password.
*4 When the confirmation screen is displayed, follow the on-screen instructions.
*5 This screen is displayed when “3LM(Loss or Theft Measures ※)” is enabled.
E-mail Settings and Changing E-mail Address
Confirm the contents [[
E-mail (@ezweb.ne.jp) is a service which enables you to exchange e-mails with other cell phones which support e-mail and with PCs. An
e-mail address is set automatically in the initial settings. You can change the e-mail address set in the initial settings.
].
■ Initial Settings
■ STEP2: Profile Settings
● Alternatively, on the home screen, tap [APPS] [[Settings] [[Initial setting] to display the initial settings screen.
[Next].
On the home screen, [APPS]
[[E-mail].
Register each item [[Save]
[[Yes].
[To profile settings].
Confirm the contents
[[接続する] (Connect).
Confirm the contents
[[閉じる] (Close).*
[Next].
* When the information on E-mail update is displayed, confirm the contents and follow the on-screen instructions.
■ Changing E-mail Address
■ STEP3: Google Account Settings
You can use applications provided by Google Inc. such as “Gmail”, “Play Store” and “Hangouts” by setting up a Google account. You can
use the product without a Google account set, but in such case some applications are not available.
The main setting items are as follows (For “Recovery email address”, leave it blank when you do not have another mail address).
User name
Register your Google account (user ID) and any characters which you want to use as a mail address. You can register any
user name but you cannot set the same user name as another user’s.
Password
Register the password for using your Google account.
● The Google account setup screen is also displayed when you activate an application for which a Google account is required for the first time.
● Depending on how you operate, screens other than those below may be displayed.
[e] [[E-mail settings].
On the home screen, [APPS]
[[E-mail].
[New].*1
Enter your “first name” and “last
name” [[ ].
Enter your user name [[
Confirm the contents
[[接続する] (Connect)
[[Eメールアドレスの変更へ]
(To change e-mail address).
[To Google account].
[Other settings].
].
Enter the security code
[[送信] (Send).
Confirm the contents
[[承諾する] (Accept).
Enter an e-mail address
[[送信] (Send).
[OK] [[閉じる] (Close).
AS87_e_設定ガイド.fm
2 ページ
２０１４年１月２９日
水曜日
午後３時２９分
■ Backing Up E-mail
● If a microSD™ memory card is inserted into the product, e-mails are saved on the card. If not, they are saved on the internal memory.
Tap “ ” to restore
all contents.
[e] [[E-mail settings].
On the home screen, [APPS]
[[E-mail].
[Backup/Restore] [[Mail
Backup] [[OK].
[Add registration]/
[Delete and register].
When the confirmation screen,
the account selection screen,
etc. is displayed, follow the
on-screen instructions.
Select folders to back up
[[OK].
Tap “Complete”
after the restoration ends.
* The security key is set to “1234” by default.
PC-mail settings
You can use a mail address other than the one used for E-mail (@ezweb.ne.jp). For using PC-mail, PC-mail settings need to be finished
by the following operations in advance. For details, refer to the “Instruction Manual application” (Japanese version) that can be used on
the product.
● On the home screen, tap [APPS] [[PC-mail] [Follow the on-screen instructions.
■ Backing Up Data
To protect important data such as address book entries, back up the data to external memory devices such as a microSD™ memory card
and PC periodically.
● Move/Copy data saved on the main unit to the microSD™ memory card or PC using Contents Manager, USB connection, etc. For details,
refer to the “Instruction Manual application” (Japanese version) that can be used on the product.
When the product is kept at an au shop or other shop for repairs, the memory will be deleted. Back up data in advance.
Making/Receiving Calls
● The information and number of screens displayed when data is backed up differ depending on the data.
■ Entering a Phone Number and Making a Call
On the home screen, [APPS]
[[Phone].
[Data transfer] [[Save data to
microSD].
On the home screen, [APPS]
[[Settings].
Enter a phone number [[Call].
Unlock.*
Tap “ ” to back up
all contents.
■ Making a Call Using Incoming History/Outgoing History
On the home screen, [APPS]
[[Phone].
[Incoming]/[Outgoing].
Tap “ ” of the other party you
want to make a call to.
Tap “Complete”
after the backup ends.
* The security key is set to “1234” by default.
■ Making a Call Using Address Book
[Save] [[Yes].
When the confirmation screen,
the account selection screen,
etc. is displayed, follow the
on-screen instructions.
Viewing/Playing data
You can view/play data on the product by the following operations.
● On the home screen, tap [APPS] [[Contents Manager] [Tap data to display.
Infrared Communication
■ Sending Data
● The information and number of screens displayed when data is sent differ depending on the data.
On the home screen, [APPS]
[[Phone].
].
Select the other party you want
to make a call to.
].
■ Answering a Call
On the home screen,
[APPS] [[Send/receive by
infrared].
Select data to send.*
[Single].
Follow the on-screen instructions
[[OK].
* When sending a profile, you can set items to send in “Send Setting”.
■ Receiving Data
Slide “Answer” down while
an incoming call is arriving.
The call starts.
● Set the other party’s device ready for sending data via infrared communication in advance. For details, refer to the instruction manual of
the other party’s device which will send data.
● The information and number of screens displayed when data is received differ depending on the data.
Tap “End call” to
end the call.
■ Putting a Call on Hold
While the call is on hold, a guidance is played for the caller.
On the home screen,
[APPS] [[Send/receive by
infrared].
Slide “Answer Holding” down
The call is put on hold and the
while an incoming call is arriving. guidance is played for the caller.
[Multiple].
Unlock.*2
[Add registration]/
[Delete and register].*3
Transferring and Backing Up Data
You can transfer data to the product from a previously used au phone using a microSD™ memory card. Also, you can back up data on the
product to external memory devices such as a microSD™ memory card and PC.
Address book, bookmark (favorites in the browser), schedule, notepad and user/learning dictionary (iWnn
IME - SH edition)
● When you transfer or back up data using a microSD™ memory card, insert the microSD™ memory card into the product in advance.
● The data which can be transferred differ depending on the previously used au phone. For details on the data which can be transferred
and the method for transferring data to a microSD™ memory card, refer to the instruction manual of the previously used au phone.
● You cannot transfer the copyrighted data saved on a previously used au phone to the product. However, if you change your phone
model from a LISMO compatible model, you can transfer Chaku-uta full®, Chaku-uta full plus® and video clips downloaded on the au
phone.
● You can download applications again only at the cost of communication charge using the same Google account/au ID as that used to
purchase the applications.
When the confirmation screen,
the account selection screen,
etc. is displayed, follow the
on-screen instructions.
*1 Authentication code is four-digit number prepared along with the other party before sending/receiving data.
*2 The security key is set to “1234” by default.
*3 If you perform “Delete and register”, the original data will be deleted.
Reducing Battery Consumption
You can access “function buttons” from the notification/status panel to enable/disable functions and modify their settings. You can reduce
the battery consumption by switching their setting frequently, such as when not using the functions. Enabled functions are displayed in
blue.
● You can also reduce the battery consumption using “Energy saving settings”. For details, refer to the “Instruction Manual application”
(Japanese version) that can be used on the product.
■ Transferring Data
● If a previously used smartphone supports Bluetooth®, you can also import address book data using the Bluetooth® function. For details,
refer to the “Instruction Manual application” (Japanese version) that can be used on the product.
● The information and number of screens displayed when data is transferred differ depending on the data.
Slide the status bar down.
On the home screen, [APPS]
[[Settings].
[Data transfer] [[Data import].
Follow the on-screen instructions
[[OK].
Tap “Answer” to
answer the call.
When you receive an incoming call while the backlight illuminates (except when the Welcome Sheet (Lock
Screen) is displayed), the screen shown on the left is displayed.
Tap “Answer” or “Answer Holding”.
Data which can be
transferred/backed up by
“Data transfer”
Enter the authentication code
[[OK].*1
[Import].
Unlock.*
].
Tap the functions whose setting
you want to switch by using
“function buttons”.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2014:01:30 09:40:02+09:00
Modify Date                     : 2014:02:07 10:38:50+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:02:07 10:38:50+09:00
Format                          : application/pdf
Document ID                     : uuid:28004c58-4648-4d90-b233-5bedfe195801
Instance ID                     : uuid:ed74b264-7c26-4662-9125-ae8b418e46e7
Page Count                      : 7

EXIF Metadata provided by EXIF.tools