Sharp HRO00222 Phablet (Handheld mini tablet) User Manual 12 UserManual draft APYHRO00222
Sharp Corporation Phablet (Handheld mini tablet) 12 UserManual draft APYHRO00222
Sharp >
Contents
- 1. User manual
- 2. User Manual
User Manual
Don’t forget your mobile phone… or your manners!
When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for others around you.
Sales:
Manufacturer: SHARP Corporation
For loss, theft, malfunction, and inquiries while overseas (24-hour reception)
ɡFrom DOCOMO mobile phones
ɡFrom land-line phones <Universal number>
International call access code
for the country you stay -81-3-6832-6600* (toll free)
* You are charged a call fee to Japan when calling from a land-line phone, etc.
ɦIf you use SH-05G, you should dial the number +81-3-6832-6600 (to enter “+”, touch and hold “0”).
Universal number
international prefix -8000120-0151*
* You might be charged a domestic call fee according to the call rate for the country you stay.
ɦ
For international call access codes for major countries and universal number international prefix, refer to DOCOMO website.
ɜġIf you lose your tablet or have it stolen, immediately take the steps necessary for suspending the use of
the tablet.
ɜġIf the tablet you purchased is damaged, bring your tablet to a repair counter specified by DOCOMO after
returning to Japan.
Repairs
(Business hours: 24 hours (open all year round))
(No prefix) 113 (toll free)
ɡFrom DOCOMO mobile phones
(In Japanese only)
ɡFrom land-line phones (In Japanese only)
ɦUnavailable from part of IP phones.
0120-800-000 (toll free)
ɦUnavailable from land-line phones, etc.
General Inquiries
<docomo Information Center>
(Business hours: 9:00 a.m. to 8:00 p.m.)
0120-005-250 (toll free)
ɦService available in: English, Portuguese, Chinese,
Spanish.
ɦUnavailable from part of IP phones.
(Business hours: 9:00 a.m. to 8:00 p.m. (open all year
round))
(No prefix) 151 (toll free)
ɡFrom DOCOMO mobile phones
(In Japanese only)
ɦUnavailable from land-line phones, etc.
ɦUnavailable from part of IP phones.
0120-800-000 (toll free)
ɡFrom land-line phones (In Japanese only)
ɜPlease confirm the phone number before you dial.
ɜFor Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo
Shop etc. near you on the NTT DOCOMO website.
NTT DOCOMO websiteȁhttps://www.nttdocomo.co.jp/english/
INSTRUCTION MANUAL
SH-05G
’15.ɜ (1st Edition)
15ɜ HI***ȁ
1
’15.ɜ
Introduction
Thank you for purchasing “SH-05G”.
Be sure to read this manual before and during use to ensure proper operation.
For optional parts (sold separately) compatible with the tablet,
refer to the DOCOMO website.
(https://www.nttdocomo.co.jp/product/option/) (in Japanese only)
Checking operation method
Quick Start Guide (Basic package)
(in Japanese only)
This guide describes operations of basic functions.
User's Manual (App of the tablet)
(in Japanese only)
This manual describes detailed guidance and
operations of functions.
In the home screen, [R]/[Instruction Manual]
User's Manual (in PDF format)
This manual describes detailed guidance and
operations of functions.
Download from the DOCOMO website
(https://www.nttdocomo.co.jp/english/support/
trouble/manual/download/index.html)
ɦThe URL and contents are subject to change without
prior notice.
The screens and illustrations in this manual are shown as
examples. The actual screens and illustrations may differ.
The explanations in this manual are based on the case when
the home app is docomo LIVE UX. If you change the home
app, operation procedures etc. may be different from the
explanations of this manual.
Note that “SH-05G” is referred to as “tablet” in this manual.
This manual refers to microSD Card, microSDHC Card or
microSDXC Card as “microSD Card” or “microSD”.
Reproduction of this manual in part or in whole without prior
permission is prohibited.
The contents of this manual are subject to change without
prior notice.
Basic package
SH-05G
(includes warranty)
Quick Start Guide
(in Japanese only)
Notes on usage
(in Japanese only)
4Contents/Precautions
Before use, read these “Precautions” carefully and use your
tablet properly.
Keep this manual in a safe place for future reference.
These precautions contain information intended to prevent bodily
injury to the user and to surrounding people, as well as damage
to property, and must be observed at all times.
The following symbols indicate the different degrees of injury
or damage that may occur if information provided is not
observed and the tablet is used improperly.
The following symbols indicate specific directions.
“Precautions” is explained in the following six sections.
Handling the tablet, adapters and docomo nano UIM card
(general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 4
Handling the tablet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 5
Handling adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 6
Handling docomo nano UIM card . . . . . . . . . . . . . . . . . . . . . P. 7
Handling near electronic medical equipment . . . . . . . . . . . . P. 7
Material list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 7
Precautions (ALWAYS FOLLOW
THESE DIRECTIONS)
Danger
This symbol indicates that
“death or serious bodily injury
may directly and immediately
result from improper use”.
Warning
This symbol indicates that
“death or serious bodily injury
may result from improper use”.
Caution
This symbol indicates that
“minor injury and/or property
damage may result from
improper use”.
Indicates a
prohibited action.
Indicates not to
handle the device
with wet hands.
Indicates not to
disassemble the
device.
Indicates that
instructions
specified are
compulsory (must
be followed).
Indicates not to use
the device near
water or get it wet.
Indicates that the
power cord must be
unplugged from the
outlet.
Handling the tablet, adapters and docomo
nano UIM card (general)
Danger
Do not use, store or leave the equipment in
locations subject to high temperatures (near a fire
or heating unit, in a kotatsu, under direct sunlight,
inside a vehicle on a hot day, etc.).
May cause fires, burns or bodily injury.
Do not place the equipment inside cooking
appliances such as microwave ovens or pressure
cookers.
May cause fires, burns, bodily injury or electric shock.
Do not attempt to disassemble or modify the
equipment.
May cause fires, burns, bodily injury or electric shock.
Do not get the equipment wet with water, drinking
water, pet urine, sweat, etc.
May cause fires, burns, bodily injury or electric shock.
Refer to the following for details on waterproofness.
nP. 10 “Waterproof”
Do not allow liquids (water, drinking water, pet
urine, sweat, etc.) to get inside the charger
terminal, external connector terminal or earphone/
microphone terminal.
May cause fires, burns, bodily injury or electric shock.
Refer to the following for details on waterproofness.
nP. 10 “Waterproof”
Use only optional parts specified by NTT DOCOMO
for use with the tablet.
May cause fires, burns, bodily injury or electric shock.
Warning
Do not subject the equipment to strong force or
impacts or throw it.
May cause fires, burns, bodily injury or electric shock.
Do not allow conductive materials (such as metal
objects and pencil lead) to come into contact with
the charger terminal, external connector terminal or
earphone/microphone terminal. In addition, do not
insert such objects.
May cause fires, burns, bodily injury or electric shock.
Do not cover or wrap the equipment with bedding
etc. when using or charging.
May cause fires or burns.
Be sure to turn off the tablet and not to charge the
battery in locations such as gas stations where
flammable gas may be generated.
May cause a gas explosion or fire.
To use Osaifu-Keitai in locations such as gas stations, be
sure to turn off the power in advance (If NFC/Osaifu-Keitai
lock is set, disable the lock before turning off the power).
If you notice anything unusual, such as an unusual
odor, overheating, discoloration or deformation
during use, charging or storage, immediately follow
the instructions below.
Unplug the power plug from the outlet or
cigarette lighter socket.
Turn off the tablet.
May cause fires, burns, bodily injury or electric shock.
5Contents/Precautions
The following is the type of the internal battery built into the
tablet.
Caution
Do not leave the equipment on unstable surfaces,
such as on a wobbly table or sloped surface.
May fall and cause injury.
Do not store the equipment in locations that are
subject to humidity, dust or high temperatures.
May cause fires, burns or electric shock.
If being used by a child, have a guardian teach him/
her the proper handling procedures. In addition,
check that the child is using the equipment as
directed.
May result in bodily injury etc.
Keep the equipment out of the reach of young
children.
A young child may swallow the equipment, or suffer bodily
injury or electric shock.
Be very careful when using the tablet connected to
an adapter continuously for a long time.
The tablet or adapter may become warm if you use an app
or video call, watch a video or TV, etc. for a long time while
charging.
Directly touching a warmed part for a long time may cause
redness, itching, rashes, etc. on your skin, or result in
low-temperature burns depending on your constitution or
health condition.
Handling the tablet
Label Battery type
Li-ion00 Lithium-ion
Danger
Do not throw the tablet into a fire or heat it.
The internal battery may catch fire, explode, overheat or
leak.
Do not apply excessive force on the tablet such as
by puncturing it, hitting it with a hammer or
stepping on it.
The internal battery may catch fire, explode, overheat or
leak.
If the battery fluid etc. comes into contact with your
eyes, do not rub your eyes but immediately rinse
your eyes with clean water. Then seek prompt
medical treatment.
May result in loss of eyesight.
Warning
Do not point the illuminated light directly at
someone's eyes. Especially when you shoot still
pictures or videos of young children, keep 1 m or
more distance from them.
Do not use Mobile light near people's faces. Eyesight may
be temporarily affected leading to accidents.
Do not allow water or other liquids, metal,
flammable material or other foreign objects to enter
the docomo nano UIM card slot or microSD Card
slot on the tablet.
May cause fires, burns, bodily injury or electric shock.
Do not shine the mobile light at anyone driving a
car or other vehicles.
May prevent a driver from driving safely and cause a traffic
accident.
Turn off the tablet or set it to Airplane mode before
going aboard an airplane.
Since using the tablet on airplanes is restricted, follow the
instructions given by the respective airlines.
May interfere with the operation of electronic devices
installed on the airplane.
If you commit a prohibited act while using the tablet on an
airplane, you may be punished by law.
Follow the instructions given by the respective
medical facility regarding the use of the tablet in a
hospital.
Turn off the tablet in areas where the use of mobile phones
is prohibited.
May interfere with the operation of electronic devices and
electronic medical equipment.
Keep the tablet away from the ears during a call in
which hands-free is set or while the ringtone is
ringing.
When you attach the earphone/microphone etc. to
the tablet to play games, music, etc., do not make
the volume too loud.
Excessively high volume may damage your hearing.
Also, it may prevent you from hearing ambient sounds and
cause an accident.
If you have a weak heart, take extra precautions
when setting functions such as the vibrator and
ringtone volume for incoming calls.
May have harmful effects on your heart.
If you are using electronic medical equipment etc.,
contact the respective manufacturer or dealer to
check whether the operation of the equipment is
affected by signals.
May interfere with the operation of electronic medical
equipment etc.
Turn off the tablet near high-precision electronic
devices or devices that use weak electronic
signals.
May interfere with the operation of electronic devices.
ɦ
Take particular care with the following devices
Hearing aids, implanted cardiac pacemakers, implanted
cardioverter-defibrillators or other electronic medical
equipment. Fire alarms, automatic doors, and other
equipment controlled by electronic signals. If you use an
implanted cardiac pacemaker, implanted
cardioverter-defibrillator or other electronic medical
equipment, contact the respective manufacturer or dealer to
check whether the operation of the equipment is affected by
signals.
If the display part or camera lens is damaged, be
careful of broken glass and the exposed inside of
the tablet.
Tape is pasted on the back of the display while the surface
of the display is covered by a protective film and the surface
of the camera lens is covered by a plastic panel so as to
minimize the possibility of glass scattering. However,
touching the broken or exposed parts may cause bodily
injury.
6Contents/Precautions
If the internal battery leaks or emits an unusual
odor, immediately stop using the tablet and move it
away from any naked flames or fire.
The battery fluid is flammable and could ignite, causing a
fire or explosion.
Caution
Do not swing the tablet by its antenna etc.
May hit you or others around you, resulting in an accident
such as bodily injury.
Do not use a damaged tablet.
May cause fires, burns, bodily injury or electric shock.
For using a motion sensor and geomagnetic
sensor, check the safety around, hold the tablet
and do not swing it more than necessary.
May cause an accident such as bodily injury.
If the display is broken and the liquid crystal then
leaks, do not get the liquid on your skin (face,
hands, etc.).
May result in loss of eyesight or harm to your skin.
If the liquid crystal comes into contact with your eyes or
mouth, immediately rinse the contacted area with clean
water and seek medical treatment.
If the liquid crystal comes into contact with your skin or
clothes, immediately wipe the liquid crystal off with alcohol
etc., and rinse the contacted area with soap etc.
The surface of the display is covered with a
protective film for ensuring the security
(shatterproof property of reinforced glass panel)
against any damages caused by the tablet being
dropped or receiving a strong impact etc. Do not
remove the film forcibly or damage it.
Using the tablet with the film removed may cause bodily
injury if the display gets damaged.
Do not dispose of the tablet in ordinary garbage.
May cause fires or damage to the environment. Take the
unnecessary tablet to a sales outlet such as a docomo Shop
or follow the instructions by a local institution that handles
used tablets.
If you use the tablet in a vehicle, contact the vehicle
manufacturer or dealer to check whether the
operation of the vehicle is affected by signals.
May interfere with the operation of electronic equipment in
some vehicle models. In this case, stop using the tablet.
Use of the tablet may cause itching, rashes,
eczema, etc. depending on your constitution or
health condition. If this occurs, immediately stop
using the tablet and seek medical treatment.
For details on materials of each part nP. 7 “Material list”
Look at the display in a well-lit place, keeping a
certain distance from the screen.
Otherwise, eyesight may be weakened.
If the battery fluid etc. leaks, do not get the liquid on
your skin (face, hands, etc.).
May result in loss of eyesight or harm to your skin.
If the liquid etc. comes into contact with your eyes, mouth,
skin or clothes, immediately rinse the contacted area with
clean water.
If the liquid etc. comes into contact with your eyes or mouth,
seek medical treatment immediately after rinsing the
contacted area.
Handling adapters
Warning
Do not use if the cord of the adapter is damaged.
May cause fires, burns or electric shock.
Never use the AC adapter in humid locations such
as a bathroom.
May cause fires, burns or electric shock.
The DC adapter should only be used in negative
grounded vehicles. Never use it in positive
grounded vehicles.
May cause fires, burns or electric shock.
Do not touch adapters if you hear thunder.
May cause electric shock.
Do not short-circuit the charger terminal when
connected to an outlet or cigarette lighter socket.
Also, do not allow any part of your body (hands,
fingers, etc.) to come into contact with the charger
terminal.
May cause fires, burns or electric shock.
Do not place heavy objects on the cord of the
adapter.
May cause fires, burns or electric shock.
When plugging/unplugging an AC adapter into/from
the outlet, do not allow metallic straps or other
metallic objects to come into contact with the
prongs of the plug.
May cause fires, burns or electric shock.
Do not apply excessive force on an adapter by
moving it up/down or to the left/right with the
adapter connected to the tablet.
May cause fires, burns, bodily injury or electric shock.
Never try to connect the microUSB plug when the
tablet or AC adapter is wet.
Inserting the microUSB plug while the equipment is wet may
cause short circuit when you charge the battery and lead to
abnormal overheat, malfunction, fires or burns due to water,
foreign objects, etc. adhering to the tablet or microUSB plug
though the tablet provides waterproof performance.
Do not handle the cord or charger terminal of the
adapters or outlet with wet hands.
May cause fires, burns or electric shock.
Always use the specified power supply and voltage.
When using overseas, use the AC adapter that is
available overseas.
Using the incorrect voltage may cause fires, burns or
electric shock.
AC adapter: 100V AC
DC adapter: 12/24V DC (for negative grounded vehicles
only)
AC adapter available overseas: 100 to 240V AC (Connect
only with a household AC outlet)
If the fuse in the DC adapter blows, always replace
it with a specified fuse.
May cause fires, burns or electric shock. Refer to the
respective manuals for information on specified fuses.
Wipe off any dust on the power plug.
May cause fires, burns or electric shock.
7Contents/Precautions
Tablet
Fully plug the AC adapter into the outlet.
May cause fires, burns or electric shock.
Always grasp the adapters when unplugging the
power plug from the outlet or cigarette lighter
socket. Do not forcibly pull by the cord of the
adapter.
May cause fires, burns or electric shock.
When plugging/unplugging an adapter into/from
the tablet, plug/unplug the adapter horizontally and
straightly, not applying excessive force on it.
May cause fires, burns, bodily injury or electric shock.
Unplug the power plug from the outlet or cigarette
lighter socket when not using for a long time.
May cause fires, burns or electric shock.
Should water or other liquids enter the equipment,
remove the power plug from the outlet or cigarette
lighter socket immediately.
May cause fires, burns or electric shock.
Always unplug the power plug from the outlet or
cigarette lighter socket before cleaning the
equipment.
May cause fires, burns or electric shock.
Caution
Do not touch the adapter for a long time when
connected to an outlet or cigarette lighter socket.
May cause burns etc.
Handling docomo nano UIM card
Caution
Be careful with the cutting surface when handling
the docomo nano UIM card.
May cause bodily injury.
Handling near electronic medical equipment
Warning
If you have electronic medical equipment such as
an implanted cardiac pacemaker or an implanted
cardioverter-defibrillator, always carry or use your
tablet at least 15 cm away from your implant.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
Patients receiving medical treatment away from a
medical facility (e.g. home treatment) who are using
electronic medical equipment other than implanted
cardiac pacemakers or implanted
cardioverter-defibrillators should consult the
respective manufacturers etc. for information
regarding the effects of signals on the equipment.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
If there is any chance that the distance between the
tablet and a person closest to you may get shorter
than 15 cm such as when you cannot freely move
around, set the tablet not to emit radio wave in
advance (by setting Airplane mode, turning the
power off, etc.).
Somebody nearby may be equipped with electronic medical
equipment such as an implanted cardiac pacemaker or an
implanted cardioverter-defibrillator. Electromagnetic signals
may have harmful effects on the operation of the electronic
medical equipment.
Follow the instructions given by the respective
medical facilities regarding the use of the tablet on
their premises.
Material list
Part Material/Surface treatment
Display side Reinforced glass/Shatterproof
sheet of surface
Surrounding area of display side PA resin/UV coating for
surface
Upper surface PC resin/Deposition
Bottom surface PC resin/Deposition
Sides PC resin/Deposition
Back PET + PC + PET resin/Hard
coating for surface
Surrounding area of back PA resin/UV coating for
surface
docomo nano UIM card slot SUS/Ni plating
microSD Card slot SUS/Ni plating
docomo nano UIM card/microSD
Card slot cover PC resin/Deposition
Gasket of docomo nano UIM
card/microSD Card slot cover Silicon rubber
Sticker indicating position for
inserting docomo nano UIM card/
microSD Card
PET resin
Tray for inserting docomo nano
UIM card POM resin
IMEI plate PC resin
Surrounding area of earphone/
microphone terminal Nylon resin
Power key ABS resin/Deposition
Side key ABS resin/Deposition
Camera panel PMMA + PC resin/Hard
coating for surface
Decoration of camera Aluminum/Anodizing
Metal section of Mobacas/TV
antenna SUS/NiTi
Mobacas/TV antenna PA resin/Deposition
External connector terminal SUS/Ni plating, Copper alloy/
Gold plating
8Contents/Precautions
SH-05G is waterproof, however, do not allow water to get
inside the tablet and do not allow optional parts to get wet.
The adapter and docomo nano UIM card are not waterproof. Do not
use in humid or steamy areas such as bathrooms and avoid exposing
to rain and other forms of moisture. If they are carried close to the
skin, perspiration may cause internal components to corrode and
result in malfunction. Note that if a problem is found to be due to
moisture, the tablet and parts are not covered by warranty and in
some cases may be irreparable. Even when repairs are possible,
repair charges will be incurred, since the damage is not covered by
warranty.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
ƦForceful rubbing of the display with a dry cloth etc. may scratch its
surface.
ƦWater drops, dirt, etc. left on the display may cause stains to form
on its surface.
ƦNever use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power or
insufficient battery charge. Keep the terminals clean with a dry cotton
swab etc.
Be careful with the terminals while cleaning them.
Do not place the equipment near an air conditioning vent.
Condensation formed due to rapid changes in temperature may
cause internal corrosion and lead to a malfunction.
Do not apply excessive force on the tablet etc. when using
it.
Carrying the equipment in a tightly packed bag or sitting on it put in
your pocket may cause damage to the display, internal components,
etc. or result in a malfunction.
Keeping an external connector device plugged into the external
connector terminal or earphone/microphone terminal may cause
damage or a malfunction.
Do not rub or scratch the display with metal etc.
May scratch it and cause a malfunction or damage.
Read the respective user's guides supplied with supported
optional parts carefully.
Do not forcefully press the surface of the touch panel or
operate with a pointed object such as a fingernail, ballpoint
pen or pin.
May damage the touch panel.
Avoid using the tablet in extremely high or low
temperatures.
Use the tablet within the range of a temperature between 5°C and
35°C and a humidity between 45% and 85%.
Using the tablet close to land-line phones, TVs, radios, etc.
may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.
Keep a separate memo noting information stored on the
tablet.
DOCOMO shall not be liable for any loss of content.
Do not drop or otherwise subject the tablet to severe
impact.
May cause a malfunction or damage.
When connecting an external connector device to the
external connector terminal or earphone/microphone
terminal, do not put it in obliquely and do not pull it while it
is plugged in.
May cause a malfunction or damage.
The tablet becomes warm during use or charging but this is
not a malfunction.
Do not leave the camera in direct sunlight.
May cause discoloration or burn-in of pixels.
Use the tablet with the docomo nano UIM card/microSD
Card slot cover closed.
Dust, water, etc. may get inside and cause a malfunction.
While using a microSD Card, do not remove the card or turn
off the tablet.
May cause data loss or a malfunction.
Never place a magnetic card near the tablet.
The stored magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
Never place magnetized items near the tablet.
Putting highly magnetized items closer may cause an error.
The internal battery is a consumable product.
Though the battery life varies with use, change the battery if the
battery life is extremely short even after being fully charged. For
details on replacing the internal battery, contact the number listed in
“Repairs” (in Japanese only) on the last page or a repair counter that
DOCOMO specifies.
Charge battery in areas where ambient temperature is
between 5°C and 35°C.
The battery life depends on the usage and deterioration of
the battery.
Avoid the following situations when the tablet is stored.
Storage with the internal battery fully charged (immediately after
charging is completed)
Storage with no battery level (cannot turn the tablet on)
May lower the performance or shorten the usable life of the internal
battery.
Approximately 40% is recommended as the proper battery level for
storage.
The surface of the tablet uses the aluminum material. Note
that dent and abrasion are easily remained as aluminum is a
soft material.
Charge the battery in areas where the ambient temperature
is between 5°C and 35°C.
Do not charge the internal battery in the following locations.
Areas with high humidity or dust, or in areas exposed to frequent
vibrations
Close to land-line phones, TVs, radios, etc.
Adapters may become warm during charging but this is not
a malfunction.
Do not use the DC adapter to charge the battery when the
car engine is not running.
May cause the car battery to run down.
When using an outlet with a feature to prevent the plug from
being removed accidentally, follow the instructions in the
outlet user's guide.
Do not subject to strong impacts. Also, do not deform the
charger terminals.
May cause a malfunction.
Do not apply unnecessary force when inserting/removing
the docomo nano UIM card.
Customer is responsible for malfunctions arising from
inserting docomo nano UIM card into a different IC card
reader/writer etc.
Always keep IC area clean.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
Keep a separate memo and note information stored on the
docomo nano UIM card.
DOCOMO shall not be liable for any loss of content.
Handling precautions
General notes
Notes about the tablet
Notes about adapters
Notes about docomo nano UIM card
9Contents/Precautions
To protect the environment, please take any unneeded
docomo nano UIM cards to a sales outlet such as a docomo
Shop.
Do not damage, touch haphazardly or short-circuit the IC.
May cause data loss or a malfunction.
Do not drop or otherwise subject the docomo nano UIM
card to severe impact.
May cause a malfunction.
Never bend the docomo nano UIM card or place heavy
objects on it.
May cause a malfunction.
Do not insert the docomo nano UIM card to the tablet with a
label, sticker, etc. attached on the card.
May cause a malfunction.
The tablet supports the security function that meets the
Bluetooth specification for security during communication
using Bluetooth functions. However, the security may not
be sufficient depending on the configuration etc. Take care
of the security while making communication using
Bluetooth function.
Even if any leak of data or information occurs while making
communication using Bluetooth function, DOCOMO shall
not be liable for any loss of content.
Radio frequencies
In the home screen, [R]/[Settings]/[About tablet]/
[Authentication] to confirm the radio frequencies the
Bluetooth function of the tablet uses. The followings are the
descriptions:
ӱ2.4: This radio equipment uses the 2,400 MHz band.
ӲFH: The modulation system is the FH-SS system.
ӳ1: The estimated coverage distance is 10 m or less.
ӴXX: Another modulation system is used.
ӵ4: The estimated coverage distance is 40 m or less.
Ӷ: All radio frequencies between 2,400 MHz and
2,483.5 MHz are used and the frequencies for mobile object
identifiers cannot be avoided.
Cautions on using Bluetooth devices
Bluetooth operates at radio frequencies assigned to the
in-house radio stations for a mobile object identifier that
have to be licensed and are used in production lines of a
factory, specific unlicensed low power radio stations, and
amateur radio stations (hereafter, referred to as “another
radio station”) in addition to industrial, scientific and
medical devices or home electric appliances such as
microwave ovens.
1. Before using the tablet, make sure that “another radio
station” is not operating nearby.
2. If radio interference between the tablet and “another
radio station” occurs, avoid interference by moving
immediately to another place or “turning off the power”.
3. Contact the number listed in “General Inquiries” on the
last page for further details.
Wireless LAN (WLAN) uses radio waves to communicate
information. Therefore, it has an advantage of freely
connecting to the LAN within the service area. On the other
hand, if security setting is not set, it is possible for a
malicious third party to intercept the communication
contents or hack. It is recommended to set security setting
at your own risk and judgement.
Wireless LAN
Do not use wireless LAN near magnetic devices such as electric
appliances or AV/OA devices or in radio waves.
ƦMagnetism or radio waves may increase noises or disable
communications (especially when using a microwave oven).
ƦWhen used near TV, radio, etc., reception interference may occur
or channels on the TV screen may be disturbed.
ƦIf there are multiple wireless LAN access points nearby and the
same channel is used, search may not work correctly.
Radio frequencies
In the home screen, [R]/[Settings]/[About tablet]/
[Authentication] to confirm the radio frequencies the
WLAN-installed devices use. The followings are the
descriptions:
ӱ2.4: This radio equipment uses the 2,400 MHz band.
ӲDS: The modulation system is the DS-SS system.
ӳOF: The modulation system is the OFDM system.
Ӵ4: The estimated coverage distance is 40 m or less.
ӵ: All radio frequencies between 2,400 MHz
and 2,483.5 MHz are used and the frequencies for mobile object
identifiers can be avoided.
Available channels for the tablet's wireless LAN are between 1 and
13. Note that other channel access points cannot be connected.
Available channels may vary depending on the country.
For use in an aircraft, contact the airline beforehand.
Cautions on using 2.4 GHz devices
WLAN-installed devices operate at radio frequencies
assigned to the in-house radio stations for a mobile object
identifier (radio stations requiring a license) used in
production lines of a factory, specific low power radio
stations (radio stations requiring no license), and amateur
radio stations (radio stations requiring a license) in addition
to industrial, scientific and medical devices or home electric
appliances such as microwave ovens.
1. Before using this device, make sure that the in-house
radio stations for a mobile object identifier, specific low
power radio stations and amateur radio stations are not
operating nearby.
2.
If the device causes harmful radio interference to the
in-house radio stations for a mobile object identifier,
immediately change the radio frequency or stop use, and
contact the number listed in “General Inquiries” on the last
page for crosstalk avoidance, etc. (e.g. partition setup).
3. If the device causes radio interference to specific low
power radio stations for a mobile object identifier or
amateur radio stations, contact the number listed in
“General Inquiries” on the last page for further details.
Cautions on using 5 GHz devices
In the 5 GHz frequency band, three bands of 5.2 GHz/5.3
GHz/5.6 GHz band (W52/W53/W56) are available.
Ʀ
W52 (5.2 GHz band/36, 40, 44, 48 ch)
Ʀ
W53 (5.3 GHz band/52, 56, 60, 64 ch)
Ʀ
W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128,
132, 136, 140 ch)
Using 5.2 GHz/5.3 GHz band wireless LAN (W52/W53)
outdoors is prohibited by the Radio Law.
Notes on using Bluetooth function
ӱġ Ӳġ ӳġ Ӵġ ӵġ
Ӷġ
Notes about wireless LAN (WLAN)
ӱġ Ӳġ ӳġ Ӵġ
ӵġ
10 Contents/Precautions
The FeliCa, NFC reader/writer and P2P function of the tablet
use weak radio waves whose handling does not require a
license of radio station.
The frequency in use is the 13.56 MHz band. When another
reader/writer or P2P function is being used nearby, keep
enough distance from it. Make sure that there is no radio
station using the same frequency band in the nearby area.
For use in an aircraft, contact the airline beforehand. Use of
the function may be restricted in some countries.
Check conditions such as regulations of the country/region
to use the function.
Never use the tablet that is modified. Using a modified
device violates the Radio Law and/or the
Telecommunications Business Law.
The tablet follows the regulations regarding the certification of
conformity with technical regulations for specific radio stations etc.
based on the Radio Law and authentication of conformity with
technical regulations for devices etc. based on the
Telecommunications Business Law, and the “Technical Conformity
Mark ” can be displayed on the electronic nameplate of the tablet
as a proof. You can see it by operating as follows.
In the home screen, [R]/[Settings]/[About tablet]/
[Authentication]
If the screws of the tablet are removed and a modification is given to
the inside, the certification of conformity with technical regulations etc.
will become invalid. Never use the tablet without the valid certification
etc. Doing so violates the Radio Law and/or the Telecommunications
Business Law.
Be careful when using the tablet while driving a motor
vehicle.
Using the tablet in hand while driving is regarded as a punishable act.
However, the punishment has no application in some cases such as
when rescuing sick and injured people or maintaining public safety.
Use the FeliCa reader/writer function only in Japan.
The FeliCa reader/writer function of the tablet conforms to the
domestic radio wave standards. Using the function overseas may
result in punishment.
Never change the basic software improperly.
This may be regarded as a conversion of software and repairs may be
refused.
Use the tablet at least 15 mm away from your body during
data communication.
SH-05G is waterproof to IPX5*1 and IPX7*2 standards if the
docomo nano UIM card/microSD Card slot cover is securely
closed.
*1 IPX5 means that tablet keeps functioning after being subjected
to a jet flow (12.5 liters/min) discharged from a nozzle (inner
diameter: 6.3 mm), from all directions (approximately 3 m from
the tablet) for 3 minutes or more.
*2 IPX7 means that SH-05G tablet keeps functioning after it is
slowly submerged to depth of 1 m in static tap water at room
temperature, left there for approximately 30 minutes and then
taken out.
You can call without using an umbrella in the rain (for rainfall of
approximately 20 mm per hour).
You can rinse off dirt from the tablet. Wash the tablet with
low-pressure water flow (6 liters/min or lower and tap water at
room temperature (between 5°C and 35°C)), holding it
approximately 10 cm below faucet or shower head. Wash by
using only your hands, not a brush or sponge, with the docomo
nano UIM card/microSD Card slot cover held in position. Drain
the tablet before use (nP. 11 “Draining water when the tablet
gets wet”).
You can use the tablet at a poolside. Do not throw water in a
swimming pool on the tablet or soak the tablet in the water of a
swimming pool.
To maintain waterproof performance, check the followings.
Securely close the docomo nano UIM card/microSD Card slot
cover. Be careful not to apply excessive force on the rubber
gasket when opening and closing.
Make sure that the docomo nano UIM card/microSD Card slot
cover is completely closed without floating.
To maintain waterproof performance, the tablet has the docomo
nano UIM card/microSD Card slot cover that allows you to close
securely. Note that opening it forcibly may cause injuries to your
nails, fingers, etc.
For details on how to open/close the docomo nano UIM card/
microSD Card slot cover nP. 14 “Inserting docomo nano UIM
card”
When your hands or the tablet is wet, do not open/close the
docomo nano UIM card/microSD Card slot cover.
Close the docomo nano UIM card/microSD Card slot cover
securely. Even a fine obstacle (one hair, one grain of sand, tiny
fiber, etc.) put between contact surfaces may allow water to get
inside.
If the tablet gets wet with water or other liquids with the docomo
nano UIM card/microSD Card slot cover opened, the liquid may
get inside causing electric shocks or malfunction. Stop using the
tablet, turn off the power and contact a repair counter that
DOCOMO specifies.
FeliCa and NFC reader/writer
Caution
Waterproof
What you can do with waterproof of SH-05G
Things to keep in mind
To maintain waterproof performance, replacement of parts is
recommended every 2 years regardless of whether the tablet
appears normal or abnormal. DOCOMO replaces the parts as
a chargeable service. Bring the tablet to a repair counter that
DOCOMO specifies.
Precautions
13 Before Using the Tablet
1Speaker
Ringtone, music, etc. can be heard from here.
The other party's voice can be heard from here during a
hands-free call.
2Display/Touch panel
3Earpiece
4Proximity sensor/Brightness sensor*1
The proximity sensor detects the distance to the face and
prevents inadvertent operation of touch panel during a call.
The brightness sensor detects the brightness of the
surrounding area and adjusts the brightness of the backlight.
5Front camera
6Incoming/Charging lamp
7docomo nano UIM card slot
The tray for inserting the docomo nano UIM card is stowed.
8microSD Card slot
9Earphone/Microphone terminal
aMobacas/TV antenna
bMobile light
cH: Power key
Use to turn the power on/off, etc.
Use to turn the display on/off.
dx/y: Volume UP/DOWN key
Adjusts the volume in each function.
edocomo nano UIM card/microSD Card slot cover
fAir vent
A vent to remove excess air from the tablet.
gBack camera
ha mark
IC card is contained (It cannot be removed).
iMouthpiece/Microphone
jExternal connector terminal
kFOMA/Xi antenna*2
lFOMA/Xi sub antenna*2
mWi-Fi/Bluetooth/GPS antenna*2
nWi-Fi/Bluetooth sub antenna*2
*1 Do not cover the sensor area with your hand or paste a sticker
etc. on the sensor area. The sensor may not work properly.
*2 The antenna is built into the main body. Covering the antenna
area with your hand may influence the quality.
ɡUsing desktop holder
When you use a Desktop Holder SH47 (sold separately), place the
tablet in the direction of the arrow so that it fits the desktop holder.
Example: When the tablet is placed horizontally
Before Using the Tablet
Part names and functions
Earphone/Microphone terminal
For details on the corresponding earphone/microphone, refer to
the following website.
(http://k-tai.sharp.co.jp/support/d/sh05g/peripherals.html#!/
earphone_support) (in Japanese only)
If you do not connect an AC adapter (sold separately), a USB
coaxial conversion cable SH01 (sold separately), etc. to the
external connector terminal, you can also place the tablet on
the desktop holder vertically.
15 Before Using the Tablet
The internal battery is not fully charged at the time of
purchase. Be sure to charge the battery before use.
ɡCautions while charging
For details on the estimated charge time nP. 93 “Main
specifications”
The battery can also be charged with the tablet turned on (While
charging, the battery icon appears with [w] superimposed).
Do not charge for a long time with the power left turned on. If the
tablet is left turned on after charging is complete, the internal
battery charge level decreases.
In this case, an AC or DC adapter (sold separately) charges the
battery again. However, depending on the time when the tablet is
disconnected from the AC or DC adapter, the battery charge
level may be low or the battery may only be usable for a short
time.
If the tablet is left for a long time even after the charging is
completed, the battery level may decrease.
When the battery is empty and the tablet is being charged, the
charging lamp may not illuminate immediately. However,
charging is in progress.
If the battery empty alert is displayed and the power cannot be
turned on, charge the battery for a while.
While charging, the tablet may not be turned on even when the
charging lamp is illuminated in red. Charge longer and try turning
the power on again.
Frequently recharging the battery when its power is still
remaining enough may shorten the usable life of the internal
battery. It is recommended to use the battery to a certain level
(e.g. after the battery level decreases) before recharging.
When the battery becomes warm, charging may automatically
stop even if the battery has not been fully charged. Charging
automatically resumes after the temperature lowers to an
appropriate temperature.
If you watch Mobacas, receive content, etc. while charging, move
the tablet as far away as possible from the power plug section of
the AC adapter.
ɡEstimated battery life when fully charged
For details on the battery life nP. 93 “Main specifications”
ɡInternal battery usable life
Internal battery is a consumable product. Battery life per charge
is gradually reduced every time the battery is charged.
When battery life per charge is reduced to approximately half of
the default time, this means that the internal battery is
approaching the end of its usable life. In this case, it is
recommended to replace the battery as soon as possible. For
details on replacing the internal battery, contact the number
listed in “Repairs” (in Japanese only) on the last page or a repair
counter that DOCOMO specifies.
If you watch TV etc. while charging for a long time, the usable life
of the internal battery may become shorter than estimated.
ɡAC adapter and DC adapter
Refer to user's guide of AC Adapter 05 (sold separately) or DC
Adapter 04 (sold separately).
AC Adapter 05 covers from 100 to 240V AC.
The shape of the plug for the AC adapter is for 100V AC (for
domestic use). To use the AC adapter of 100 to 240V AC
overseas, a conversion plug adapter applicable to your country
of stay is required. Do not use a voltage converter for overseas
travel to charge the battery.
[Read the user's guides of AC Adapter 05 (sold
separately) and DC Adapter 04 (sold separately)]
Following operations describe how to charge with AC Adapter 05
or DC Adapter 04.
1Insert the microUSB plug of the AC adapter/DC
adapter horizontally into the external connector
terminal on the tablet with the side marked with
“B” turned up
IMEI plate
A plate on which the IMEI number (International Mobile
Equipment Identifier) is printed is stowed near the docomo
nano UIM card slot and microSD Card slot. The IMEI number is
required when you contact a repair counter that DOCOMO
specifies, so do not pull it out.
Note that pulling out the IMEI plate forcibly or adding forces on
it may damage the plate.
If you accidentally pull out the IMEI plate, push it back slowly in
the direction of the docomo nano UIM card slot.
Charging
Continuous
talk time
FOMA/3G
Approx. $$ min
GSM
Approx. $$ min
VoLTE (Voice call)
Approx. $$ min
Continuous
stand-by time
FOMA/3G
At rest: Approx. $$ hr (Preferred network type:
LTE/3G/GSM(Auto))
GSM
At rest: Approx. $$ hr (Preferred network type:
LTE/3G/GSM(Auto))
LTE
At rest: Approx. $$ hr (Preferred network type:
LTE/3G/GSM(Auto))
Mobacas
watching time
Approx. $$ min
TV watching
time
Full-Seg: Approx. $$ min
1Seg: Approx. $$ min
Charging with AC adapter/DC adapter
16 Before Using the Tablet
:Check the direction (front or rear) of the microUSB plug and
insert it horizontally.
2When you erect the AC adapter power plug and
insert it into an outlet or insert the DC adapter
power plug into a car cigarette lighter socket,
the charging lamp illuminates and charging
starts
3When charging is complete, the charging lamp
turns off
4Remove the AC adapter power plug from the
outlet, or remove the DC adapter power plug
from the car cigarette lighter socket
5Remove the microUSB plug of the AC adapter/
DC adapter horizontally from the external
connector terminal
You can charge the tablet by connecting the tablet to a PC with
Micro USB Cable 01 (sold separately).
For details on connecting to a PC nP. 82 “Connecting the
tablet and PC”
ɡTurning power on
1H (for at least 2 seconds)
:When you turn the power on for the first time, make the initial
settings (nP. 21 “Initial settings”).
ɡTurning power off
1H (for at least 1 second)/[Power off]/[OK]
ɡTurning power off forcibly
You can forcibly turn the power off if the screen does not respond or
the power cannot be turned off.
1H (for at least 8 seconds)
:Release your finger after the vibrator is activated to turn the
power off.
ɡTurning display on/off
The display is turned off when H is pressed or the tablet is not in
use for a set length of time.
Press H while the display is turned off to turn it on.
ɡTouch panel lock
When the power or the display is turned on, the touch panel is
locked.
Touch [J] to unlock.
Operations in touch panel lock screen
To set/disable the manner mode: y (for at least 2 seconds)
To turn on/off the mobile light: x (for at least 2 seconds)
To activate SH Camera: [K]
To activate ̱͓̽̀͝ϋΏͿσ (Shabette-Concier): [W]
To display the detailed information on notifications: Drag the
clock down
To display the status panel: Drag the status bar down
Note that inserting or removing the equipment forcibly may
cause damage to the external connector terminal and the
microUSB plug or result in a malfunction.
When using a DC adapter
The DC adapter should only be used in negative grounded
vehicles (12 and 24V DC).
Do not use with the car engine shut off. May drain the car
battery.
The DC adapter fuse is a consumable product. For
replacement, purchase a new fuse at a nearest auto parts
retailer etc.
Refer to the user's guide of DC Adapter 04 for details.
Charging lamp
microUSB plug
Keep side marked with “B” up
External connector
terminal
100V AC
outlet
Cigarette
lighter socket
AC adapter DC adapter
Power plug
Power plug
Charging with Micro USB Cable 01
Turning power on/off
The notifications are displayed in the lock screen of the touch
panel. You can make settings for displaying of notifications in
[When device is locked] (nP. 65 “Sound/notification”).
Mobile light
The mobile light may be automatically turned off if you use the
tablet for a long time or the tablet becomes warm after the
mobile light is turned on. Also, you may not be able to use the
mobile light if the tablet is warm.
17 Before Using the Tablet
The followings describe basic operations of the tablet such as
operations of the touch panel and navigation keys, and
operations for shooting screenshot.
The followings describe the operations to use the display
(touch panel).
Operations may differ depending on the function and screen in
use.
ɡTouch
Touch a key or an item displayed on the screen and then release
your finger from it to select or set it.
ɡTouch and hold
When you keep your finger on the touch panel, a menu may appear
depending on the function and screen in use.
ɡSlide (Swipe)/Drag
Move your finger while keeping it on the touch panel to scroll the
screen or move an icon, a widget, etc. to the desired position.
In addition, when you touch a menu or an item by mistake, move
your finger away from it to cancel the selection.
ɡFlick
Move your finger like sweeping the touch panel in the home screen
etc. to switch pages.
ɡPinch out/Pinch in
You may be able to zoom the screen in/out etc. by putting two
fingers on the touch panel and moving them with putting a distance
between two fingers apart (pinch out)/closer (pinch in) depending
on the function and screen in use.
ɡNavigation keys
Use the navigation keys displayed at the bottom of the screen to
perform the basic operations.
1{/v: Back key/Close key
Return to the previous screen.
Close the keyboard.
2|: Home key
Display the home screen.
3}: Recent Apps key
Display Quick Launcher or Recent Apps (nP. 26 “Quick
Launcher”, P. 28 “Recent Apps”).
4[: Trace to search or enlarge
Activate Trace to search or enlarge (nP. 28 “Trace to
search”, P. 28 “enlarge”).
ɡUsing user-aid function
You can quickly activate apps supporting the user-aid function.
1Slide any of the navigation keys up/slide it to
[Google]
:If there are multiple apps supporting the user-aid function,
[q] is displayed and you can select an app to activate.
ɡRetrieving menu
When you touch [{]/[z]/[|] etc., slide the left edge of the screen to
the right or touch and hold the screen, functions (menus) available
in that screen appear.
Example: App screen
Basic operation
Operation of touch panel
Cautions when using the touch panel
The touch panel is designed to be lightly touched with your
finger. Do not forcefully press with your finger or a pointed
object (fingernail, ballpoint pen, pin, etc.).
In the following cases, the touch panel may not work even if
you touch it. May cause a malfunction.
Operation with a gloved finger
Operation with the tip of a fingernail
Operation with foreign objects placed on the operation pad
Operation on the touch panel on which a protective sheet,
sticker, etc. is put
Operation while the touch panel is wet
Operation with fingers wet with sweat, water, etc.
Operations may be interrupted if you touch an area other than a
confirmation screen or the status bar while the confirmation
screen etc. is displayed.
Operation while using function
Menu
22 Before Using the Tablet
ɡInitial settings for docomo service
1When the initial settings screen for docomo
service is displayed, [Agree to all]/[Start
settings]
2Make the initial settings
:The following items can be set.
docomo ID
docomo cloud
docomo apps password
docomo location information
Remote Initialization Service*
Install all apps
* This is not displayed when you have not set a docomo
apps password.
3[Start using]
An access point (sp-mode) for Internet connection is
registered by default. You can add other access points and
change them if necessary.
For details on sp-mode, refer to the DOCOMO website.
If you want to use mopera U or Business mopera Internet, add
an access point of either provider manually.
For details on mopera U, refer to the mopera U website.
ɡChecking an access point in use
1In the home screen, [R]/[Settings]/[More]/
[Cellular networks]/[Access Point Names]
ɡSetting additional access points
Never set the MCC to a figure other than 440 or the MNC to a
figure other than 10. Otherwise the added access point
disappears from the screen.
1In the home screen, [R]/[Settings]/[More]/
[Cellular networks]/[Access Point Names]/
[m]
2[Name]/enter the name of the network profile
to create/[OK]
3[APN]/enter the access point name/[OK]
4Enter other items required by network
operators/[z]/[Save]
Reset an access point to default setting.
1In the home screen, [R]/[Settings]/[More]/
[Cellular networks]/[Access Point Names]
2[z]/[Reset to default]
If you use Wi-Fi function of the tablet, you can use mail or
Internet by connecting to access points of your home,
corporate network or public wireless LAN service.
Packet communication is also available while [Wi-Fi] is set to On.
Wi-Fi connection is prioritized while Wi-Fi connection is set, but
the connection is automatically switched to that of LTE/3G/GPRS
network once Wi-Fi connection is terminated. Note that packet
communication charges may be incurred in this case.
Refer to the manual of your wireless LAN base unit when using
the access point at home etc.
Operate access point registration near the access point.
If you use the docomo service by using Wi-Fi function, set a
docomo ID in advance. In the home screen, [R]/[Settings]/
[docomo service/cloud]/[docomo ID୭] (Set docomo ID) to
set it.
1In the home screen, [R]/[Settings]/[Wi-Fi]
2Set to On
3Select an access point
:If you select an access point protected by security, enter the
password (security key) and select [CONNECT].
:To register access points manually: [z]/[Add network]/
enter the network name/set security/[SAVE]
:WPS compatible access points can be easily registered. In
the home screen, [R]/[Settings]/[Wi-Fi]/[z]/[Easy
Settings]/[WPS Push Button]/[WPS Pin Entry] to register an
access point.
:Alternatively, in the home screen, [R]/[Settings]/[Wi-Fi]/
[z]/[Easy Settings]/[AOSS] to connect to an access point.
Follow the instructions on the screen and operate after this
step.
Setting an access point
If the settings of MCC and MNC are changed and the added
access point disappears from the screen, reset the settings or
set the access point manually.
Resetting an access point
When sp-mode is not subscribed or if you fail to make
automatic setting of an access point due to signal status such
as outside the service area, you are required to set the access
point again manually.
Wi-Fi settings
Radio interference with Bluetooth devices
Wireless LANs (IEEE 802.11b/g/n) use the same frequency
band (2.4 GHz) as Bluetooth devices. Therefore, using the
wireless LAN device near a Bluetooth device may cause radio
interference, lowering of communication speed, noise or
connection failure. In this case, turn off the Bluetooth device or
keep the tablet and the wireless LAN device at least
approximately 10 m away from the Bluetooth device.
When you select an access point and connect to it with a wrong
password (security key), [Avoided poor Internet connection],
[Authentication problem] or [Connected (Limited)] is displayed.
Confirm the password (security key). When [Avoided poor
Internet connection] or [Connected (Limited)] is displayed after
entering the correct password (security key), you may not have
acquired the correct IP address. Connect to the access point
again after confirming signal status.
The registration process using WPS takes a few minutes. After
completion of the registration of the access point, check that the
proper connection to the access point is acquired.
As for the manual registration of an access point, this function
supports WEP, WPA/WPA2 PSK and 802.1xEAP as the
security setting.
If you connect to an access point which is not connected to the
Internet, [5] is displayed and the communication may be
made by mobile networks, not Wi-Fi connection.
To make Wi-Fi communication by using such an access point,
enable [Using this AP without internet connection] of Advanced
options before connecting to the access point.
23 Before Using the Tablet
ɡDetailed settings
1In the home screen, [R]/[Settings]/[Wi-Fi]
2[z]/[Advanced]
3Select an item
Network notification: Set whether to display a notification
icon when an open network is detected.
ƦSet it after setting [Wi-Fi] is set to On.
Scanning always available: Set whether to scan networks by
the location information service and other apps even when
[Wi-Fi] is set to Off.
Wi-Fi sleep policy: Set whether to disconnect Wi-Fi when the
display is turned off.
Avoid poor connections: Set whether to use the Wi-Fi
function only when stable Internet connections are available.
Wi-Fi frequency band: Set the frequency band to use.
Handover: Set whether to automatically switch access points
to use if you use the tablet while moving.
Mobile/Wi-Fi simultaneous use: Make settings for
simultaneous use of mobile and Wi-Fi networks.
Install certificates: Install certificates.
Wi-Fi Direct: Make settings for Wi-Fi Direct.
Passpoint: Set whether to automatically connect to the
available Passpoint compatible access points when [Wi-Fi] is
set to On.
MAC address: Confirm the MAC address.
IP address: Confirm the IP address.
ɡMobile/Wi-Fi simultaneous use
You can make settings for the function to automatically switch to
mobile networks when communications with Wi-Fi access points
slow down (Smooth change mode) or the function to download
content at high speed using mobile and Wi-Fi networks at the same
time (Dual Speed mode).
Set [Wi-Fi] to On and connect to an access point in advance.
Since packet communication is also used when you use mobile
and Wi-Fi networks at the same time, packet communication
charges may be incurred.
1In the home screen, [R]/[Settings]/[Wi-Fi]
2[z]/[Advanced]
3[Mobile/Wi-Fi simultaneous use]
4Select an item
Simultaneous use mode setting: Set a mode to use.
Advanced settings: Make settings for applicable access
points and apps, and inapplicable servers.
Notes: Check the precautions.
:Touch []] of an item to display its explanations.
ɡDisconnecting
1In the home screen, [R]/[Settings]/[Wi-Fi]
2Select the connected access point/
[Disconnect]
:Disconnect with the password retained. The access point
may be automatically connected again such as when the
display is turned on.
You can use the tethering function that connects Wi-Fi
compatible devices, or PCs etc. connected via Micro USB
Cable 01 (sold separately) or Bluetooth communication to the
Internet by using the tablet as an access point.
You can connect up to $$ devices in total at the same time: $$
PC connected via Micro USB Cable 01, $$ Wi-Fi compatible
devices and $$ Bluetooth devices.
The tablet supports dial-up connections via DUN profile.
Before using Bluetooth tethering, register the other party's
Bluetooth device in advance (nP. 80 “Using Bluetooth
function”).
As for the settings on the Bluetooth device, refer to its manual.
1In the home screen, [R]/[Settings]/[More]/
[Tethering]
2Select an item
USB tethering: Set whether to use the USB tethering.
Wi-Fi tethering: Set whether to use the Wi-Fi tethering.
Set up Wi-Fi hotspot: Make settings for Wi-Fi tethering such
as network name and security.
Wi-Fi tethering Easy Connection: Set whether to use the
tethering by connecting to WPS compatible access points.
Bluetooth tethering: Set whether to use the Bluetooth
tethering.
1In the home screen, [R]/[Email]
:Only when an account is not set up, the account setup
screen appears.
2Enter mail address/[a]
3Enter password/[a]
:Provider information is preset for some mail accounts, and a
receiving mail server and a sending mail server are
automatically set.
:When you use an account whose provider information is not
preset, it is necessary to set a receiving mail server and a
sending mail server manually. For details on those settings,
contact the Internet service provider you use.
4Set up an account/[a]
5Enter an account name and your name/[a]
[Handover]
You can set it only when you select [2.4 GHz only] of Wi-Fi
frequency band and [Setting OFF] of Simultaneous use mode
setting.
Tethering
[USB tethering]
The tethering function is available on Windows Vista, Windows
7, Windows 8, Windows 8.1 and Linux.
A microSD Card inserted in the tablet cannot be mounted on a
PC during USB tethering.
For details on USB tethering, refer to the following website.
(http://www.android.com/tether#usb)
[Wi-Fi tethering]
While the tablet is functioning as an access point, it cannot
access the Internet via Wi-Fi connection.
Make settings for Wi-Fi access points in [Set up Wi-Fi hotspot].
For details on Wi-Fi tethering, refer to the following website.
(http://www.android.com/tether#wifi)
[Set up Wi-Fi hotspot]
At the time of purchase, Network name is set to [SH-05G_AP]
and Security is set to [WPA2 PSK] while Password is set
randomly. Change the settings if necessary.
Setting up mail account
34 Call
You can use the phone and phonebook, and make settings for
call, voice/answering memo, operations available when calls
are received, etc.
1In the home screen, []]/[Dial]
2Enter a phone number
:Always enter the city code, even when it is a local number.
:You can set to notify/not to notify the other party of your
phone number for each call by adding “186”/“184” to the
head of the phone number.
1Call
Make a call. Also, if there are outgoing call history items,
touch it to enter the latest one when the phone number
has not been entered.
2Favorites
Display the contacts set as favorites.
3Delete
Delete an entered number.
Touch and hold it to delete all the entered numbers.
4Register
5Dial
Display the dial screen.
6Outgoing/Incoming call history
7Phonebook
Display the phonebook.
3[0]
:To make a video call: [|]/[Video call]
4[End call] to end the call
When using services in which you are required to enter
numbers additionally during a call, such as inquiry about the
balance in your bank account or ticket reservation, enter
pause (,)/wait (;) after entering a phone number to make a call
with an additional number added to the main phone number.
ɡAdding 2 seconds pause
After making a call to a main phone number, the tablet
automatically pauses for 2 seconds and an additional number is
sent.
1In the home screen, []]/[Dial]
2Enter a phone number/[|]/[Add 2-sec pause]
3Enter a number to send/[0]
ɡAdding wait
After making a call to a main phone number, the tablet
automatically waits and then a screen asking whether to send an
additional number is displayed. Touch [Yes] to send an additional
number.
1In the home screen, []]/[Dial]
2Enter a phone number/[|]/[Add wait]
3Enter a number to send/[0]
4[Yes] during the call
By using video call, you and the other party can talk on the
tablet while seeing each other's image. Also, you can switch
between voice call and video call while talking on the tablet.
Call
Making a call
If you talk on the tablet with your hair put between the earpiece
and your ear, the proximity sensor may not work properly. The
screen may be kept turned on and the call may be interrupted
when the screen is touched accidentally.
VoLTE
VoLTE enables you to use call and video call of high quality.
When you use VoLTE, the tablet and the other party's device
need to satisfy the following conditions.
They are VoLTE compatible models
They are inside the Xi service area*
Preferred network type is set to [LTE/3G/GSM(Auto)]/[LTE/
3G] (nP. 85 “Preferred network type”)
Call mode setting is set to [VoLTE/3G] (nP. 37 “Call
settings/Other”)
* VoLTE is not available outside the Xi service area or during
international roaming.
Entering touch-tone signals
Video call
Call charges and packet communication charges are incurred
when making a video call. In addition, packet communication
charges are incurred also when receiving a video call.
Quality of image may differ depending on the usage
environment because suitable communication levels are
applied according to the usage condition.
If you cannot switch to a video call during a voice call,
[Switching to video call failed] is displayed and the voice call
continues.
Be careful not to cover the speaker section during a video call.
The other party's voice may not be heard well.
While using video call in the background, your image is not sent
to the other party.
As for image displayed during a video call, since processes for
displaying image may differ depending on the model to use,
ranges of your image displayed on the tablet may differ from
those displayed on the other party's device.
35 Call
WORLD CALL is an international calling service available from
DOCOMO devices in Japan.
To make an international call through a company other than
DOCOMO, contact the respective companies for instructions.
The caller ID may not be notified or displayed correctly
depending on overseas network operators. In this case, making
a call with incoming call history is not available.
1When a call is received, the ringtone sounds
and the incoming lamp flashes
2Answer the call
:Operate after touching [3].
1Reject call with SMS
Reject the incoming call and send a selected SMS
message to the other party.
2Reject
Reject the incoming call.
3Accept
Answer the call.
4Accept voice
Answer the call using voice call.
5Accept video
Answer the call using video call.
3[End call] to end the call
ɡAnswering a call while display is turned on
When a call is received while a screen other than lock screen of the
touch panel is displayed, the incoming notification is displayed. You
can answer the call by using the notification.
1When a call is received, the incoming
notification is displayed at the top of the screen
2[ACCEPT]/[ACCEPT VIDEO]
:Touch the incoming notification to display incoming voice
call/video call screen.
:Flick the incoming notification to the left/right to hide the
notification.
ɡPlacing a call on hold
1When a call is received, the ringtone sounds
and the incoming lamp flashes
2[|]/[Put a caller on hold]
ɡAnswering a video call without sending your own
image
1When a video call is received, the ringtone
sounds and the incoming lamp flashes
2[|]/[Camera OFF response]
Emergency call
Emergency calls Phone number
Police 110
Fire and ambulance 119
Marine emergency 118
The tablet supports “Emergency call location notification”.
When you make a call to an emergency number such as 110,
119 and 118, the information of your location (location
information) is automatically notified to the agency that has
received the emergency call (e.g. the police station). Depending
on your location and the reception status of the signal, the
agency that has received the emergency call may not be able to
confirm the exact location.
If you are not sending your caller ID by calling with “184” added
or other means, your location information and phone number
are not notified. However, if the agency that has received the
emergency call considers your location information and phone
number necessary for important purposes, such as life saving,
the agency may retrieve them regardless of your settings.
In addition, the area/timing to introduce “Emergency call
location notification” depends on the state of preparation in
each agency that receives emergency calls.
In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo nano UIM card is not
inserted, while the PIN code is locked, from the PUK (PIN
Unlock Key) entry screen.
When calling 110, 119 and 118 from your tablet, the police or
fire stations may return your call for verification purposes. State
that you are calling from a mobile phone, and give your phone
number and exact present location.
Remain stationary to ensure that the call is not disconnected
while you are on the line, and keep the tablet turned on to
receive calls for approximately 10 minutes afterwards.
Depending on the region, calls to the police or fire station of the
local area may not be made.
When you make a call to the emergency number (110, 119 or
118) while Reject call setting is set, items of Reject call setting
are set to [OFF].
Emergency call may not be available in some networks.
You cannot make a video call to the emergency number (110,
119 or 118).
International call (WORLD CALL)
[Calling Method]
When calling to a land-line phone: 010/country code/area
code (city code)/the other party's phone number/[0]
When calling to a mobile phone: 010/country code/the other
party's mobile phone number/[0]
ƦAs for the other parties' mobile phone numbers and area codes
(city codes) that begin with “0”, omit the first “0” when entering
(except some countries or regions such as Italy).
ƦAlternatively, enter “009130-010” as usual or “+” instead of
“010”.
Answering a call
Incoming lamp
Incoming voice call screen
Incoming video call screen
40 Call
1Account
2Group icon
3Group name
4Add group
Add a group.
5Groups
6Number of contacts registered in the group
7Sort
ɡGrouping/Ungrouping contacts
1In the home screen, select “
Ρκ·ρ;Ρ
”
(docomo cloud) folder/[docomo
phonebook]/[Group]
2Select a group
3[Delete member]/[Add member]
4Select names/[OK]/[OK]
You can display your phone number registered on the docomo
nano UIM card. You can also register your name, mail
addresses, etc.
1In the home screen, select “
Ρκ·ρ;Ρ
”
(docomo cloud) folder/[docomo
phonebook]/[My profile]
2Check/Use the profile
1Image
2Registered content
3Notice
Make settings for Friends notice.
Available only when you are using cloud computing.
4Edit
ɡEditing My profile
1In the home screen, select “
Ρκ·ρ;Ρ
”
(docomo cloud) folder/[docomo
phonebook]/[My profile]
2[Edit]
3Set each item/[Save]
You can back up/restore the phonebook by using docomo
backup.
For details on backing up/restoring phonebook by using docomo
backup nP. 64 “Backing up to/Restoring from a microSD Card”
You cannot sort groups other than ones created with a docomo
account.
The group function is available on contacts created with a
docomo/Google account etc.
My profile
Backing up/Restoring phonebook
41 Mail/Web Browser
You can send and receive messages using docomo mail, SMS,
Gmail, etc., and display websites using Chrome.
You can send and receive mails using mail address of
DOCOMO (@docomo.ne.jp). Pictograms and Deco-mail are
available. Automatic reception is also supported. Mails can be
easily transferred when you have lost the tablet or changed
models since sent and received mails are saved on the
docomo mail server. Moreover, you can use the mailing
function on PCs, tablets, etc. if you use a docomo ID.
For details on docomo mail, refer to the DOCOMO website.
1In the home screen, [^]
:Follow the instructions on the screen and operate after this
step.
You can send and receive text messages with mobile phone
numbers serving as destinations.
ɦFor details on the number of characters which can be sent and
received etc., refer to “Short Message Service (SMS)” on the
DOCOMO website.
You can also exchange messages with those who use network of
overseas network operators. Refer to the DOCOMO website for
information on countries where this service is available and
available overseas network operators.
1In the home screen, [R]/[Messaging]
2[NEW MESSAGE]
3Enter the destination and message/[@]
1In the home screen, [R]/[Messaging]
2Select a thread
:Messages are grouped into threads according to their
destinations/senders and displayed.
1Image
Displayed if an image of the other party is registered in
the phonebook. Touch to select and use an app
supporting the registered content of the phonebook. If the
person is not registered in the phonebook, you can
register the person in the phonebook after touching it.
2Destination/Sender
3Number of unread messages
4NEW MESSAGE
5Mail search
6Number of messages in thread
7Date and time of the message exchange
3Check the message
1Destination/Sender
2Phone call
3Date and time of the message exchange
4Message
1In the home screen, [R]/[Messaging]
2Select a thread
3Enter the message/[@]
1In the home screen, [R]/[Messaging]
2Select a thread
3Touch and hold a message/[Forward]
4Enter the destination and message/[@]
1In the home screen, [R]/[Messaging]
2Select a thread
3Touch and hold a message/[Delete]/[Delete]
1In the home screen, [R]/[Messaging]
:To delete all threads: [|]/[Delete all threads]/[Delete]
2Touch and hold a thread/[DELETE]/[Delete]
1In the home screen, [R]/[Messaging]
2[|]/[Settings]
3Select an item
SMS Enabled: Set an app to send and receive SMSs with.
Mail/Web Browser
docomo mail
SMS
You can switch Default SMS app to Hangouts
(nP. 70 “More”).
If destinations are devices owned by those who use network of
overseas network operators, enter “+”, the country code and the
recipient's mobile phone number. If the phone number begins
with “0”, omit the first “0”. Alternatively, enter “010”, the country
code and the phone number.
Half-width katakana and special symbols in SMS messages
may not appear correctly for recipient.
SMS cannot be sent when “186” or “184” is added.
Displaying message
Replying message
Forwarding message
Deleting message
Deleting thread
Setting Messaging
42 Mail/Web Browser
Delete old messages: When the number of saved messages
reaches its limit, messages are automatically deleted from
the oldest one.
Text message limit: Set the number of messages to be saved
by thread.
Delivery reports: Notify you that sent messages have been
received every time a message is received.
Manage SIM card messages: Manage messages saved on
the docomo nano UIM card.
Notifications: Notify you that messages have been received
on the status bar.
Sound: Set the ringtone to be rung when a message is
received.
Vibrate: Set the vibrator to be activated when a message is
received.
You can send and receive mails by setting up a mail account
provided by a service provider.
Set up an account in advance (nP. 23 “Setting up mail
account”).
1In the home screen, [R]/[Email]
2[(]
3Compose a mail
1Account
If you set up multiple accounts, you can switch accounts.
2Destination
When you enter part of a mail address or a name
registered in the phonebook, destination candidates are
displayed.
3Subject
4Message
5File attachment
6Add destinations
Touch it to add Cc or Bcc.
4[,]
The screen may appear different depending on the account to
use.
1In the home screen, [R]/[Email]
2Select a mail
1Box name/Folder name being displayed
Touch [/] to switch or set folders/accounts.
2Panel menu
Display the icon of the account being used.
Touch a displayed icon to switch folders.
3Switch accounts
If you set up multiple accounts, you can switch accounts.
4Mail search
5Mails
The characters of sender or subject are displayed in thin
characters when a mail is read.
Touch images to checkmark the mails and you can set
them to be deleted/unread/read etc. collectively.
6Star icon
Use it as a mark indicating that the mail is special or
supposed to be dealt with later.
You can check starred mails in the Starred folder.
7Newly compose mail
3Check the mail
1Subject
2Sender/Destination
If the sender is registered in the phonebook, available
apps supporting the registered content of the phonebook
are displayed after touching the image. If the person is
not registered in the phonebook, you can register the
person in the phonebook after touching the image.
3Date and time of reception
Touch to display/hide the details of sender, destination or
data and time of reception.
[Delivery reports]
When you send a message to mobile phones of other carriers,
the notification for confirming that it has been received may not
be sent to you.
Email
Some receiving side models may not be able to receive the
subject completely.
Mails sent from a Gmail account are treated as ones from a PC.
When receiving side models set PC-mail rejection, mails cannot
be sent.
Mails that could not be sent for any reason will be saved in
Unsent folder as unsent mails.
Depending on the signal status etc., characters may not appear
correctly on the screen of the other party's device.
Attaching file
Files of up to approximately 5 MB can be attached. There are
no limits to the number of files to be attached.
Depending on the receiving side device, files may not be
received or correctly displayed/played. Also, the quality of
videos may deteriorate or videos may be converted to
continuous still pictures.
Displaying mail
43 Mail/Web Browser
4Message
5Attached file
6Star icon
Use it as a mark indicating that the mail is special or
supposed to be dealt with later.
You can check starred mails in the Starred folder.
7Menu of each mail
Touch to reply to all or print by mail.
8Forward
9Reply
aDelete
bUnread
1In the home screen, [R]/[Email]
2Select a mail
3[)]
:To reply to all: [{] of each mail/[Reply all]
:To forward: [*]
4Compose a mail
1Reply type
Touch to switch Reply/Reply all/Forward.
2Destination
3Message
4Quote text
Touch to display/hide the mail of the sender.
You cannot operate it when forwarding mails.
5Mail of sender
6Subject
7Respond inline
Enter the mail of the sender in the message.
5[,]
1In the home screen, [R]/[Email]
:To delete selected mails: Touch the images of mails/[+]/
[OK]
2Select a mail
3[+]/[OK]
1In the home screen, [R]/[Email]
2[/]/[Settings]
3Select an item
General settings: Make settings for the whole Email.
Add account: Add account.
Privacy policy: Check the privacy policy.
:Select an account to make settings for the details on the
account such as Signature and Email notifications.
Gmail is a mail service provided by Google.
Set up a Google account in advance (nP. 24 “Setting up
Google account etc.”).
1In the home screen, select “Google” folder/
[Gmail]
2[(]
3Compose a mail
1Account
If you set up multiple accounts, you can switch accounts.
2Destination
When you enter part of a mail address or a name
registered in the phonebook, destination candidates are
displayed.
3Subject
4Message
5File attachment
6Add destinations
Touch to add Cc or Bcc.
4[,]
1In the home screen, select “Google” folder/
[Gmail]
2Select a thread
:
In Gmail, mails are grouped into threads by reply and displayed.
If new mails are replied ones of an existing mail, they are
grouped into the same thread. A new thread is created for newly
composed mails or mails whose subjects have been changed.
1Box name/Label name being displayed
Touch [/] to switch or set displaying types/accounts.
2Panel menu
Display the icon of the account being used.
Touch a displayed icon to switch displaying types.
3Switch accounts
If you set up multiple accounts, you can switch accounts.
Replying/Forwarding mail
Deleting mail
Setting Email
Gmail
Displaying mail
80 Data Communication
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number. Enter the same number on the
tablet and the other party's Bluetooth device.
Set the other party's Bluetooth device to the registration stand-by
status in advance.
1In the home screen, [R]/[Settings]/
[Bluetooth]
2Set to On
3Select a Bluetooth device/[PAIR]
:The confirmation screen for connection may be displayed.
:Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device. Also, some
Bluetooth devices may start connection after completing
registration.
:To search for Bluetooth devices: [z]/[Refresh]
:Touch [B] of a paired Bluetooth device to set name and
intended purpose of the other party's Bluetooth device.
ɡWhen receiving registration request from Bluetooth
device or connection request from unregistered
Bluetooth device
1Registration request/Connection request from
Bluetooth device
2Drag the status bar down/[Pairing request]/
[PAIR]
:When the confirmation screen about the settings on pairing
appears, select [PAIR].
:Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device.
:The confirmation screen for connection may be displayed.
ɡUnregistering Bluetooth device
1In the Bluetooth screen, [B] of the Bluetooth
device to unregister/[FORGET]
ɡDisconnecting Bluetooth device
1In the Bluetooth screen, select the Bluetooth
device to disconnect/[OK]
ɡSetting Bluetooth
Set after setting [Bluetooth] to On.
1In the Bluetooth screen, [z]
2Select an item
Refresh: Search for the Bluetooth device.
Rename this device: Change the tablet's name.
aptX: Set whether to use aptX®.
Handsfree setting: Set whether to always have voices output
from the connected Bluetooth compatible hands-free device
during a voice call.
Show received files: Display the history of data received via
Bluetooth connection.
ɡSending data
Example: Still picture
1In the home screen, [R]/[Contents
Manager]/[Photo]
2Touch and hold a still picture/[Share]/
[Bluetooth]
:Set the receiver's Bluetooth device to the reception stand-by
status.
3Select a Bluetooth device to connect to
ɡReceiving data
1Data is sent from the sender's Bluetooth device
2Drag the status bar down/select the incoming
notification/[ACCEPT]
3Drag the status bar down/select the received
data
Using Bluetooth function
You can connect up to seven Bluetooth devices at the same
time. Bluetooth devices may not work properly or the number of
Bluetooth devices which can be connected at the same time
may differ depending on the profile.
If you fail to connect a Bluetooth device, connection may
become available after re-registering it.
When [Bluetooth] is set to On, the tablet is set to receive
registration requests/connection requests from other Bluetooth
devices. Make the setting for displaying the tablet's information
on other Bluetooth devices in advance to allow the tablet to be
searched for by other Bluetooth devices.
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status etc.
For details on the operations of the other party's Bluetooth
device, refer to the manuals of the Bluetooth device to be used.
[aptX]
When you enable [aptX], sounds may not be output depending
on the Bluetooth device. In this case, disable [aptX].
Sending and receiving by Bluetooth
Note that if you select [Delete and register] when receiving all
data, all data registered to the target function are deleted.
Receiving all data may not be available depending on the data
type.
When available space in the save destination becomes
insufficient while receiving data, the data being received to that
point are saved and receiving ends.
94 Appendix/Index
*2 Talk (Communication)/Stand-by time is shortened with the
frequent use of each function such as data communications,
Multiaccess, camera function, TV function or Bluetooth
function. Actual usage time is the combination of talk
(communication) and stand-by time. The longer the talk time is,
the shorter the stand-by time becomes.
*3 Talk (Communication)/Stand-by time may be reduced by
approximately half or Mobacas watching time/TV watching time
may be shortened depending on conditions including the
battery level status, functions used, temperature or other
environmental conditions, and signal strength (no signal or
weak signal).
*4 This is the average usage time during which the tablet is not
carried with you and in a status where signals are received
normally.
*5 Mobacas watching time is an estimate of watching time in a
status where signals are received normally.
*6 TV watching time is an estimate of watching time in a status
where signals are received normally.
*7 CMOS (Complementary metal-oxide semiconductor) is an
image device equivalent to the film of silver salt cameras.
*8 Picture size: $$ ($$×$$)/File size: Approx. $$ KB
*9 Picture size: $$ ($$×$$)/File size limit: $$ GB/Type: $$
*10 Depending on usage of apps which use common memory, the
memory capacity of each data may be reduced.
*11 MIMO is supported.
*12 MU-MIMO (Client mode) is supported.
ɡInternal battery
* Each recording time is up to approximately $$ hours.
This model SH-05G mobile phone complies with Japanese
technical regulations and international guidelines regarding
exposure to radio waves.
This mobile phone was designed in observance of Japanese
technical regulations regarding exposure to radio waves (*1) and
limits to exposure to radio waves recommended by a set of
equivalent international guidelines. This set of international
guidelines was set out by the International Commission on
Non-Ionizing Radiation Protection (ICNIRP), which is in
collaboration with the World Health Organization (WHO), and the
permissible limits include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health
condition.
The technical regulations and international guidelines set out limits
for radio waves as the Specific Absorption Rate, or SAR, which is
the value of absorbed energy in any 10 grams of tissue over a
6-minute period. The SAR limit for mobile phones is 2.0 W/kŨ. The
highest SAR value for this mobile phone when tested for use at the
ear is 0.258 W/kŨ and when worn on the body is 0.328 W/kŨ (*2).
There may be slight differences between the SAR levels for each
product, but they all satisfy the limit.
The actual SAR of this mobile phone while operating can be well
below that indicated above. This is due to automatic changes to the
power level of the device to ensure it only uses the minimum
required to reach the network. Therefore in general, the closer you
are to a base station, the lower the power output of the device.
This mobile phone can be used in positions other than against your
ear. Please keep the mobile phone farther than 1.5 cm away from
your body by using such as a carrying case or a wearable
accessory without including any metals. This mobile phone satisfies
the technical regulations and international guidelines.
The World Health Organization has stated that “a large number of
studies have been performed over the last two decades to assess
whether mobile phones pose a potential health risk. To date, no
adverse health effects have been established as being caused by
mobile phone use.”
Please refer to the WHO website if you would like more detailed
information.
(http://www.who.int/docstore/peh-emf/publications/facts_press/
fact_english.htm)
Please refer to the websites listed below if you would like more
detailed information regarding SAR.
Ministry of Internal Affairs and Communications Website:
(http://www.tele.soumu.go.jp/e/sys/ele/index.htm)
Association of Radio Industries and Businesses Website:
(http://www.arib-emf.org/01denpa/denpa02-02.html) (in Japanese
only)
NTT DOCOMO, INC. Website:
(https://www.nttdocomo.co.jp/english/product/sar/)
SHARP Corporation Website:
(http://k-tai.sharp.co.jp/support/sar/) (in Japanese only)
*1 Technical regulations are defined by the Ministerial Ordinance
Related to Radio Law (Article 14-2 of Radio Equipment
Regulations).
*2 Including other radio systems that can be simultaneously used
with Xi/FOMA.
Battery Lithium-ion
Nominal voltage $$V DC
Nominal capacity $$ mAh
Recording time of voice recorder
Save destination Number of entries Recording time
Tablet memory
(approx. $$ GB)*Up to $$ Up to approx. $$ hr
Specific Absorption Rate (SAR) of
Mobile Phones
95 Appendix/Index
European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is
2 W/kŨ and the highest SAR value for this device when tested at
the ear is 0.179 W/kŨ* and when worn on the body is 0.398 W/kŨ*.
For body-worn operation, this mobile device has been tested and
meets the RF exposure guidelines when used with an accessory
containing no metal and positioning the device a minimum of
1.5 cm from the body. Use of other accessories may not ensure
compliance with RF exposure guidelines.
As SAR is measured utilizing the devices highest transmitting
power the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to the
power level of the device to ensure it only uses the minimum level
required to reach the network.
* The tests are carried out in accordance with international
guidelines for testing.
Declaration of Conformity
In some countries/regions including Europe, there are restrictions on the use
of 5GHz WLAN that may limit the use to indoors only.
If you intend to use 5GHz WLAN on the device, check the local laws and
regulations beforehand.
FCC Notice
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
Information to User
This equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation; if this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient/relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
5 GHz WLAN Operation in USA
Within the 5.15-5.25 GHz band, UNII devices are restricted to
indoor operations to reduce any potential for harmful interference to
co-channel Mobile Satellite Services (MSS) operations.
FCC RF Exposure Information
Your device is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kŨ.
The tests are performed in positions and locations (e.g., at the ear
and worn on the body) as required by the FCC for each model. The
highest SAR value for this device when tested for use at the ear is
less than 0.19 W/kŨ and when worn on the body, as described in
this user guide, is 0.92 W/kŨ.
This device has been tested and meets the FCC RF exposure
guidelines.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided.
The FCC has granted an Equipment Authorization for this device
with all reported SAR levels evaluated as in compliance with the
FCC RF emission guidelines. SAR information on this device is on
file with the FCC and can be found under the Display Grant section
of (http://transition.fcc.gov/oet/ea/fccid/) after searching on FCC ID
APYHRO00222.
Additional information on Specific Absorption Rates (SAR) can be
found on the FCC website at (http://www.fcc.gov/encyclopedia/
radio-frequency-safety).
FCC ID Location
The device is electronically labeled and the FCC ID can be
displayed via the About tablet & the Authentication under the
Settings menu.
Hereby, Sharp Telecommunications of Europe Ltd, declares that this
SH-05G is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the
following Internet address:
(http://www.sharp.co.jp/k-tai/) (in Japanese only)
For body worn operation, this device has been tested and meets the
FCC RF exposure guidelines. Please use an accessory designated
for this product or an accessory which contains no metal and which
positions the handset a minimum of 1.5 cm from the body.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided.
The FCC has granted an Equipment Authorization for this device
with all reported SAR levels evaluated as in compliance with the
FCC RF emission guidelines. SAR information on this device is on
file with the FCC and can be found under the Display Grant section
of (http://transition.fcc.gov/oet/ea/fccid/) after searching on FCC ID
A
PYHRO00222.
A
dditional information on Specific Absorption Rates (SAR) can be
found on the FCC website at (http://www.fcc.gov/encyclopedia/
radio-frequency-safety).
aaa
FCC ID Location
The device is electronically labeled and the FCC ID can be
displayed via the About tablet & the Authentication under the
Settings menu.
97 Appendix/Index
FeliCa is a contactless IC card technology developed by Sony
Corporation. FeliCa is a registered trademark of Sony
Corporation.
Under the MPEG-4 Visual Patent Portfolio License, customers
have licensed permission for the following use of this product to
engage in non-profit personal use. Other uses are not permitted.
Encoding MPEG-4 standard video (henceforth referred to as
MPEG-4 video).
Decoding an MPEG-4 video that a customer not engaged in
personal commercial activities has encoded.
Decoding an MPEG-4 video obtained from a licensed provider.
For details on other intended uses, contact MPEG LA, LLC.
This product is licensed under the MPEG-4 Systems Patent
Portfolio License for encoding in compliance with the MPEG-4
Systems Standard. An additional license and payment of
royalties are necessary in the following cases.
Data stored or replicated in physical media which is paid for on
a title by title basis.
Data which is paid for on a title by title basis and is transmitted
to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
Contact MPEG LA, LLC for additional details.
This product is licensed under the AVC patent portfolio license
for the personal and noncommercial use of a consumer to (i)
encode video in compliance with the AVC standard (henceforth
referred to as AVC video) and/or (ii) decode AVC video that was
encoded by a consumer engaged in a personal and
noncommercial activity and/or was obtained from a video
provider licensed to provide AVC video. No license is granted or
shall be implied for any other use. Additional information may be
obtained from MPEG LA, L.L.C.
See (http://www.mpegla.com)
This product is licensed under the VC-1 Patent Portfolio License
for the personal and noncommercial use of a consumer to (i)
encode video in compliance with the VC-1 standard (henceforth
referred to as VC-1 video) and/or (ii) decode VC-1 video that was
encoded by a consumer engaged in a personal and
noncommercial activity and/or was obtained from a video
provider licensed to provide VC-1 video. No license is granted or
shall be implied for any other use. Additional information may be
obtained from MPEG LA, L.L.C.
See (http://www.mpegla.com)
Content owners use Microsoft PlayReady™ content access
technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to
access PlayReady-protected content and/or WMDRM-protected
content. If the device fails to properly enforce restrictions on
content usage, content owners may require Microsoft to revoke
the device's ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content
protected by other content access technologies. Content owners
may require you to upgrade PlayReady to access their content. If
you decline an upgrade, you will not be able to access content
that requires the upgrade.
The abbreviations of operating systems (Japanese versions)
below are used in this manual.
Windows 8.1 stands for Microsoft® Windows® 8.1, Microsoft®
Windows® 8.1 Pro and Microsoft® Windows® 8.1 Enterprise.
Windows 8 stands for Microsoft® Windows® 8, Microsoft®
Windows® 8 Pro and Microsoft® Windows® 8 Enterprise.
Windows 7 stands for Microsoft® Windows® 7 (Starter, Home
Basic, Home Premium, Professional, Enterprise and Ultimate).
Windows Vista stands for Windows Vista® (Home Basic,
Home Premium, Business, Enterprise and Ultimate).
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, INC. and any use of such marks by NTT DOCOMO, INC. is
under license. Other trademarks and trade names are those of
their respective owners.
Google, Google logo, Android, Google Play, Google Play logo,
Google+, Google+ logo, Gmail, Gmail logo, Google Calendar™,
Google Calendar logo, Google Maps™, Google Maps logo,
Google Chrome™, Google Chrome logo, Google Voice Search™,
Google Voice Search logo, YouTube, YouTube logo, Google
Drive, Google Drive logo and Google Now are trademarks of
Google Inc.
This product includes software based on GNU General Public
License (GPL), GNU Lesser General Public License (LGPL) and
other licenses.
For details on licenses of related software, in the home screen,
[R]/[Settings]/[About tablet]/[Legal information]/[Open
source licenses].
Source codes of software based on GPL, LGPL and Mozilla
Public License (MPL) can be referred to on the following website
for free. For details, refer to the following website.
https://sh-dev.sharp.co.jp/android/modules/oss/) (in Japanese
only)
The tablet can unlock the SIM lock. Unlock the SIM lock to use
non-DOCOMO SIM cards.
Some services, functions, etc. may be unavailable. DOCOMO
shall not guarantee any operation of the tablet.
For details on the procedure of unlocking SIM lock, refer to the
DOCOMO website.
1Insert another carrier's SIM card
:For details on how to insert/remove the SIM card
(nP. 14 “docomo nano UIM card”)
2Turn the power on
3Enter the SIM unlock code/[Unlock]
Others
Open source software
Unlocking SIM lock
Please be considerate of those around you when using the tablet.
When in an area where use is prohibited
When you are on an airplane or in a hospital, follow the instructions given by
the respective airlines or medical facilities. Turn off the tablet in areas where
the use of mobile phones is prohibited.
While driving
Using the tablet in hand while driving is regarded as a punishable act.
However, some cases such as when rescuing sick and injured people or
maintaining public safety are exempted.
When in public places such as theaters, movie theaters or
museums
Using the tablet in public places where you should be quiet results in
disturbing others.
Be aware of the volume of your voice when using the tablet in
quiet places such as restaurant and hotel lobby.
Use in places where you do not block a passage in the town.
Please be considerate of the privacy of individuals around you
when taking and sending photos using camera-equipped tablet.
The tablet has convenient functions such as setting not to answer a
call and setting to mute sound of the tablet.
Manner mode (nP. 66 “Mode settings”)
Mutes sound of the tablet.
ɦHowever, the manner mode cannot mute camera shutter sound.
Public Mode (Phone OFF) (nP. 37 “Network service”)
When a call is received, a message stating that you are in a place that does
not allow the use of mobile phone is played and the call is automatically
disconnected.
Phone vibration (nP. 65 “Sound/notification”)
Notifies you of incoming call with vibration.
Answering memo (nP. 37 “Voice/Answering memo”)
Records callers' messages when you cannot answer the call.
ɦAdditionally, optional services such as Voice Mail Service
(nP. 37 “Network service”) and Call Forwarding Service
(nP. 37 “Network service”) are available.
From the tablet dmenu/
̤ݖအεȜΠ
(Support)/
Ρκϋ
ρͼϋ̧
(docomo online procedure) (in Japanese only)
From a PC My docomo (https://www.nttdocomo.co.jp/mydocomo/)
/
ਯਫ਼͞ࠀඤယ͈་ࢵ̧̦̱̹̞
(Change your address or
subscription) (in Japanese only)
ɦYou may not be able to access some website services due to system
maintenance, the content of your subscription, etc.
ɦ“Network security code” or “docomo ID/Password” is required to use
“Ρκϋρͼϋ̧” (docomo online procedure).
Using mobile phone with your manners!
Turn off your tablet in the following places
Set Public Mode in the following places
Be aware of the place to use a mobile phone and the
volume of your voice and ringtone
Be considerate of the privacy of the individuals around
you
These functions ensure manners in public
We collect your unnecessary mobile phones and
other devices irrespective of carrier. Bring them to a
docomo Shop near you.
ɦIntended devices: Mobile phone, PHS, battery
pack, charger and desktop holder (irrespective of
carrier)
Carrying out various procedures, checking
subscription, etc. online