Sharp LC 46SB54U User Manual LCD TELEVISION Manuals And Guides L0805212

SHARP LCD Television Manual L0805212 SHARP LCD Television Owner's Manual, SHARP LCD Television installation guides

User Manual: Sharp LC-46SB54U LC-46SB54U SHARP LCD TELEVISION - Manuals and Guides View the owners manual for your SHARP LCD TELEVISION #LC46SB54U. Home:Electronics Parts:Sharp Parts:Sharp LCD TELEVISION Manual

Open the PDF directly: View PDF .
Page Count: 32

Download
Open PDF In Browser	View PDF

SHARP
LC-46SB54U

LiQUiD CRYSTAL
TELEVISION

Z_
.,_.,_x
.................

N0--R
124
Supplied
Make

sure

OO_
D | G |

IMPORTANT

NYCE

_mr
..................................

T A L

: Please read this operation manual
before starting operating the equipment.

Accessories

the following

accessories

i_xll

are provided

,anguages)
"AA" size
2)Page
batte/_/(
8
x

with

the product.

Cabb damp (x 1)
CabLe tie (:_.1)

AC Page
cord 7
(x 1)

Stand unit ( x 1)
Page 6

Page 7

= AEways use the AC cord supplied with the _V.
= AC cord enclosed in this product
SHARP

ELECTRONICS

is for 110 125V. Irl using it on the 125 240V AC. please consult

CORPORATION,

LATIN AMERICA

6100 Blue Lagoon Drive, Suite 150, Miami,

To avoid

I cleaning
CLOTH-3)

scratching
cloths
packs.

the frame

are available
Call

Florida

or screen,
directly

1-800-BE-SHARP

from

33125,

please
Sharp
for

U.S.A.

use a soft,
in single

ordering,

the following.

GROUP

lint free

cloth

(00Z-LCD-CLOTH)

or VISIT

for cleaning.
or triple

Approved
(00Z-LCD-

www.sharpusa.com/SharpDirect.

IMPORTANq_
To aid reporting in case of loss or theft, please record
I Model No.:
the TV's model and serial numbers in the space
Serial No.:
provided. The numbers are located at the rear of the TV.

IMPORTANT
WARNING:

INFORMATION

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
The lightning flash with arrow-head
symbol, within an equilateral

RISK
DO

OF ELECTRIC
NOT

triangle, is intended to alert the
user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock

SHOCK

OPEN

to persons.
The exclamation point within a
triangle is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying
the
product.

CAUTION:

TO PREVENT ELECTRIC SHOCK,
SLOT, FULLY INSERT.

MATCH WIDE BLADE OF PLUG TO WIDE

CAUTION=
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD,
BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS
PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY
WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY
THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER'S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND
USE MOUNTING ACCESSORIES RECOMMENDED
BY THE MANUFACTURER.
A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE.
QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING=

FCC Regulations state that any unauthorized changes or modifications
to this
equipment not expressly approved by the manufacturer could void the user's authority
to operate this equipment.

CAUTION=

This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic
interference with electric
appliances such as radios and televisions, use shielded cables and connectors
for connections.

Printed in Mexico
TINS-D501
WJZZ
08P02-MX-NM

IMPORTANT INFORMATION
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-46SB54U
This device complies with Part 15 of the FCC Rules. Operation
conditions:

is subject to the following

(1) This device may not cause harmful interference, and (2) this device must accept
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION

two

any interference

Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device,
)ursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radiofrV technician for help.
"Note

to CATV

system

installer:

National
Electrical
Code that
be connected
to the grounding

This
provides
system

reminder

is provided

to call

the

CATV

guidelines
for proper
grounding
and,
of the building,
as close
to the point

system

installer's

attention

in particular,
specifies
that
of cable
entry as practical."

to Article

820-40

of the

the

ground

shall

cable

This product utilizes tin-lead solder, and fluorescent
lamp
containing
a small amount of mercury. Disposal of these
materials may be regulated due to environmental
considerations.
For disposal or recycling information,
please contact your local
authorities,
the Electronic Industries Alliance: www.eiae.org,
the
lamp recycling organization:
www.lamprecycle.org
or
Sharp at 1-800-BE-SHARP
(For U.S.A. only)

Trademarks
, Dolby
Manufactured
Laboratories.
under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of

. HDMI
"HDMI,Licensing
the HDMILLC."
logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

. energy
Productsefficiency.
that have earned the ENERGY STAR_ are designed to protect the environment through superior

I
I

DEAR SHARP

CUSTOMER

Thank you for your purchase
of the Sharp Liquid
of trouble-free
operation
of your product,
please
using this product.

Crystal Television.
read the important

IMPORTANT

INSTRUCTIONS

SAFETY

To ensure safety and many years
Safety Instructions
carefully
before

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electdc shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully
before using the product.
1)
2)
3)
4)
5)
6)
7)
8)
9)

10)
11)
12)

13)
14)

Read these instructions.
Keep these instructions.
Heed allwarnings.
Follow allinstructions.
Do not use this apparatus near water.
Clean onlywith dry clott_.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachmentdaccessodes
specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as poweFsupply
cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

Additional

Safety Information

15) Power Sources-This
product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
16} OverloadingDo not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
17) Object and Liquid Entry- Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Damage Requiring Service- Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) Whentheproductexhibitsadistinctchangeinperformance
thisindicatesaneedforservice.
19) Replacement Parts-When
replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics
as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check- Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting-When
mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.

iMPORTANT

SAFETY

iNSTRUCTiONS

• Outdoor Antenna Grounding
if an outside antenna is
connected to the television equipment, be sure the antenna
system is g/ounded so as to provide some p/otection against
voltage surges and built up static charges,
Article 810 of the National Bectrical Code, ANSI/NFPA 70,
provides information with regard to p/oper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to g/ounding
electrodes, and requirements for the grounding electrode.

EYAM PLE OE ANTENNA GROUNDING
AS PER
NATIONALELECT%CALCOD£
ANSI/NFPA
70

ELECTRODE SYSTEM
/NEC ART 250 PART H)
NEC --

NATIONAL

ELECTRICAL

CODE

• Turn off the main power and unplug the AC cold tTom the wall outlet befo/e handling,

•• Use
a
damp cloth to gently
the panel
it is really
scratchUSe
a soft
softtheClOthpanelandsurface.gently
wipe wipe
the surface
of when
the display
panel,dirty.
Using a hard cloth may
_
_
_
(It may scratch the panel surface when wiped strongly)
• If the panel is dusty, use an anti-static brush, which is comme/cially available, to clean it
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to dean it, such materials may damage
the panel surface
• To dean the outer cabinet, use the same method Do not use liquid or aerosol cleaners

• Water and Moisture
Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool and the like
• Stand - Do not place the product on an unstable carf, stand, tripod or table. Placing the product on an unstable base
can cause the product to fall, resulting in serious personal injuries as well as damage to the product, Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product When mounting the product
on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
• Selecting the location
Select a place with no direct sunlight and good ventilation,
• Ventilation - The vents and other openings in the cabinet ale designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheatirlg and/or shorten the life of the product, Do not place
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings, This product is not
desigrled for builtqn installation; do not place the ploduct in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufactureCs instructions are tollowed
• The Liquid Crystal panel used in this product is made ot glass Therefore, it carl break when the product is dropped or
applied with impact Be careful not to be illured by broken glass pieces in case the panel breaks
• Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat,
• The Liquid Crystal panel is a very high technology product with 2,078,600 pixels, giving you fine picture details.
Occasionally, a tew non active pixels may appear on the screen as a fixed point of blue, green or red Please note that
this does not affect the performance ot your product.
• Lightning
For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods ot time, unplug it ffom the wall outlet and disconnect the antenna This will prevent damage to
the equipment due to lightning and poweMine surges
• Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or whe/e it can fall into such power lines or circuits When installing an outside antenna system,
ext/eme care should be taken to keep from touching such power lines or circuits as contact with them might be tatal
• To prevent fire, never place any type of candle or flames on the top or near the TV set
• To prevent fire or shock hazard, do not place the AC cord under the TV
set or other heavy items.
.j_
• Do not display a still picture for a long time, as this could cause an afterimage to remain
• To prevent fire or shock hazard, do not expose this product to dripping
_
_'
or splashing.
No objects filled with liquids, such as vases, should be placed on the product
Precautions
when transporting the TV
• Be sure to always carry the TV by two people holding it with two hands

one hand on each side of the %/

QUICK REFERENCE
"• Before attaching (or detaching) the stand, unplug the AC
cord from the AC iNPUT terminal.
• Before performing work spread cushioning over the base
area to lay the TV on This will prevent it from being
damaged

• Attach the stand in the correct direction.
• Do not remove the stand from the _/unless
using an
optional
wall mount bracket
to mount it.
Be sure to follow the instructions,
incorrect installation
of the stand may result in tbe 1]/falling
over,
I

Confirm that there are 8 screws (4 short screws
and 4 long screws) and a hex key supplied with the
stand unit.

tiff

|-"

A °

= This _ sbould be mounted on tbe wall only with the
AN-52AG4 (SHARP) wall mount bracket. The use of
other wall mount brackets may result in an unstable
installation and may cause serious injuries.
installing the TV requires special skill that should
only be performed by qualified service personnel
Customers should not attempt to do the work
themselves.
SHARP bears no responsibility
for
improper mounting or mounting that results in
accident or injury.
Using

an optional

bracket

to mount

the

• You carl ask a qua
Audio

_2ol

status

• When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below

See page 24 for details on the Output Select function.

Mutes the current
Press MUTE.

sound output.

• "r_" will be displayed on the screen for 30 minutes, and
the sound is silenced
Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below
Mute will be canceled ifyou press VOL + / - or MUTE.
Mute will be canceled after SOminutes have passed,
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.

You can turn on the TV or put it on standby by
pressing POWER on the TV or on the remote control
unit. (See page 11 .)

You can change channels by pressing CH/X/V
or _9,
(DOT).
Examples:
To select a I or 2-digit cbannel number {e. g., Channel 5):
Press 5 _
ENT

Allows you to set a time when
switches to standby.
Press SLEEP.

• The remaining time displays when the sleep timer has been set
Each time you press SLEEP, the remaining time switches
as shown below.

To select a 3-digit cllannel number (e. g., Channel l 15):
Press 1 _
1_
5_
ENT
To select a 4-digit cbannel number (e. g., Ollanne122.1}:
Press 2 _
2_
• {DOT} _
1 _ENT

Off _.30

=_ 60 == 90 =_ 120

When set, the time automatically starts courlting down
Ifyou want to ad ust the sleep timer, you can press SLEEP
twice then change the time setting
Five minutes before the tin-le expires, the remaining time
displays every minute

• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds
• If you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds,
• When you enter 0-9 and • (DO_, channel selection will be
made if there is no operation within a few seconds

Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when 1he remaining time reacheszero
When the sleep timer is set, its indicator on the TV lights red

Press FLASHBACK
channel.
You can select 4 preset
categories.

favorite channels

the _V automatically

in 4 different

to switch

to the previously

tuned

Press FLASHBACK again to switch back to the currently
tuned channel

Press A, B, C or D.
• While watching the TV, you can toggle the selected
channels by pressing A, B, C and D

= FLASHBACK will not work if no channel has been changed
after the %/is turned on

• See page 24 for details of favorite channel settings.

Direct Button

Operation

[] MTS/SAP

AV MODE gives you 7 viewing options to choose from
to best match the sur_unding
environment
of the TV,
which can vary due to factors like room brightness,
type of program watched or the type _ image input
f_m external equipment.

stereo

mode

The TV h_s a feature that allows reception ot sound
other than the main audio for the program. This feature
is called Multi channel Television Sound (MTS). The TV
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast
other

Press AV MODE. Current AV MODE displays.
Pless AV MODE again before the mode displayed on the
screen disappears The mode changes as shown below:

information,
which could
or something
completely
information.

Example:
When the input source is 3¥, iNPUT 1, 2 or 3 terminals
STANDARD _ MOVIE _ GAME _ USER [TVi
I
!
DYNAMIC *
DYNAMIC (Fixed)

be audio in another language
dillerent like weather

You can enjoy Hi-Fi stereo sound or SAP broadcasts
where available.
* Stereo broadcasts: View p/og/ams ]ike live sporting
events, shows and concerts in dynam]o stereo sound
* SAP broadcasts: Receive TV b/oadcasts in either MAIN or
SAP sound. MAIN sound: The normal program soundtlack
[either in mono or stereo), SAP sound: Usten to a second
language, supplementary commentary or other information
(SAP is mono sound)
if stereo sound is difficult to hear.
Obtain a clearer sound by manua]ly switching to fixed
mono sound mode

Example:
When the input source is iNPUT 4, 5 or 6 terminals
STANDARD _,
MOVIE _
GAME_
PC
!
!
DYNAMIC _
DYNAMIC (Fixed)_
USER[ ..e]
STANDARD: For a highly defined image in a normal
lighting.
[Enhanced Pictu/e Contrast: on]
MOVIE: For a movie
[Enhanced Pictu/e Contrast: oft]

You can change MTS as shown below to match the television
bloadcast signal

GAME: Lowers image brightness for easier viewing.
[Enhanced Pictu/e Contrast: oft]
PC: For PC

Press AUDIO to toggle between audio modes
Examples: when receiving MTS and SAP
STEREO mode: STEREO_
MONO
STEREO + SAP mode: ST[SAP) _ SAP(ST)_
t
MAIN + SAP mode: MAIN_
SAP
MONO mode: MONO

[Enhanced Pictu/e Contrast: oft]
USER: Allows the user to customize settings as desi/ed
You can set the mode for each input source.
[Enhanced Pictu/e Contrast: oft]
DYNAMIC (Fixed}: Changes the image and sound
settings to the facto/y p/eset va]ues No adjustments
are a]lowed

MONO
!

[] Digital broadcasting
audio mode
The types of audio tlansmitted in a digital b/oadcast include
SURROUND as well as MONO and STEREO. In addition, it

[Enhanced Pictu/e Contrast: on]
DYNAMIC: For a deapcut image emphasizing high
contlast, useful for sports viewing.
[Enhanced Pictule Contrast: on]

is possible for multiple audio tracks to accompany a single
video track
Pless AUDIO to toggle between audio modes,
Example: when receiving Digital broadcasting
STEREO (Audio1) _ STEREO (Audio2)
I....... SURROUND (Audio3) _-.._11

You can select a difterent AV MODE item for each input
mode. (For example, select STANDARD for %/input and
DYNAMIC for INPUT 1,)
When you play games, "GAME" is recommended for AV
MODE,
"Enhanced Picture Contrast" technology detects the source
video characteristics and smoothly adjusts the screen
brightness acco/dingly to realize deeper black levels.

MTS only operates while in %/mode

Allows you to capture and freeze a moving
you are watching.
Press FREEZE.
A moving image is captured.
• Pless FREEZE again to cancel the function

image that

When this function is not available, "No displaying still
image available," will display,
The still image automatically goes out after 30 minutes
Ifyou ale using the freeze function and a b/oadcast
activates the V CHIP BLOCK, the fteeze function will be
canceled and a V CHIP BLOCK message will appear

Direct Button

Operation

In the Closed Captio_ system, there can be more than
one caption service provided.
Each is identified by its
own number. The "CC1" and "CC2" services display
subtitles of TV programs superimposed
over the
program's
picture.

To view extett/al source images, select the input source
using iNPUT on the remote control unit or on the TV.
1 Press iNPUT.
A list of selectable sources appears
5'

Press INPUT
input source.

again or press

h,/T

to select the

In the Closed Caption system, the "Text1" or "Text2"
services display text that is unrelated to the program

• An image from the selected sou/co automatically displays.
Each time INPUT is plessed, the input source toggles,
Ffthe corlesponding inpul is not plugged in, you cannot change
1heinput Be sureto connect the equipmenl beforehand

being viewed (e.g., weather or news). These services
are also superimposed
over the program currently
being viewed.

• See page 10 for external equipment connection
Pless PC to switch to an image from the PC.

Allows you to gain quick access
Press PC.

Press CC.

This will plesent the Closed Caption information display
Press CC while the Closed Caption information is
still on the screen.
Pless repeatedly until you select the desired closed
caption service

to PC mode.

You can operate the on-screen
display menu by using
the following
buttons.
MENU: Displays the menu screen.
_,/T/4/_,
ENTER: Select a desired item on the
soree//.
RETURN:
Returns to the previous menu screen.
EXIT: Turns off the menu screen.

information

Example:
If a program has three services (Digital CC(ENG), CCI
and Text1 ), the closed caption display will toggle in this
sequence:

• For operating the on scleen display menu, see "Menu
Operation Buttons" on page 16

t/3 ENG_
Displays channel
Press DISPLAY.

information

Your TV is equipped with an internal Closed Caption
decoder.
It allows you to view conversations,
narration
and sound effects as subtitles on your TV. Closed
Captions are available on some TV programs and on
some VHS home video tapes at the discretion of the
program provider.
It is a more flexible

system

than the original

Closed
See page 24 for detailed closed caption settings,
When the program contains no closed caption, " " displays
in the closed caption information.
If the language code, e.g, "ENG", is not found on Digital TV
programs, " "will be shown.
* Four kinds of closed caption service (CCI, CC2, Text1,
Text2) ale potentially available, but a b/oadcast may contain
none or only some d these services at the discretion d the
program provider

Caption system, because it allows for a variety
ot caption sizes and font styles. When the Digital
Closed Caption service is in use, it will be indicated
by the appearance
ot a 3qetter abbreviation
that also
indicates the language of the Digital Closed Captions:
ENG (English), SPA (Spanish), FRA (French) or other
language codes.
Not all programs

and VHS videotapes

captions. Please look for the "_"
that captions will be shown.

offer closed

symbol

2/3 OO1_ 3/3 Text1_ Off

The CO button keeps a reco/d of the last service
selected in its memory
If the last closed caption mode (e.g I/3ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appears in parentheses, e.g "1/8(CC1)"
Closed Caption services that appear in palentheses will
not be stored in the CC button's memory as your last
selected service. Only services that you have selected
with the CC button are stored

being viewed.

to ensure

Direct Button

K_!d_4
YOU csr/select
1

Press
The
* The
Press

Operation

the screen size.

VIEW MODE.
View Mode menu displays.
menu lists the View Mode options selectable for the type of video signa] currently being received
VIEW MODE or A/_'
while the Vbw Mode menu is displayed to select a desired Rem on the menu.

You can sequentially select a View Mode that has its own aspect ratio
[] For 4:3 programs
Example:

Screen

size images

Side Bar

Suitable for viewing
conventional 4:3 programs in
their normal tormat,

S.Stretch

Zoom

(Smart stretch)

Suitable for stretching 4:3
programs to fill the screen

Stretch

Suitable for viewing widescreen 2,35:1 anamorphic
DVDs in full scleen

This mode is usdul tot 178:1
DVDs, When viewing1,85:1
DVDs, stretch mode will still show
very thin black bands at the top
and boltom d the screen

[] For HD programs
Stretch: Suitable for viewing wide-screen 178:1 aspect ratio program, stretch mode will still show very thin black bands at
the top and boltom of the screen.
Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on
the screen,
Fun Screen (720p only}: You can select "Full Screen" only when receiving a 720p signal
S,Stretch (Smart stretch}: Suitable for stretching 4:3 programs to fill the screen
Zoom: Suitable for viewing wide screen 235:1 aspect ratio programs in full screen

When using Dot by Dot, it is possible to see noise or bars around different outer portions of the screen Please change view
mode to correct this,
[] For PC input

mode

Connect the PC before making adjustments (See page 10)
Selectable screen size may vary with input signal type
Example:

Screen

Input signal

size images
Normal

Zoom

Stretch

Dot by Dot

IO] El
4:S

Input signal

Keeps the original
aspect ratio in afl_ll
screen display

Forviewing
widescreen
programs, The top
and bottom of the
image is clopped

Stretch

Dot by Dot

An image fully fills the
screen

Detects the resolution
of the signal and
displays an image with
the same number of
)ixels on the screen

I
16:9

An image fully fills the
screen

Detects the resolution
of the signal and
displays an imagewith
the same number d
pixels on the screen

On-Screen
e,

Display Menu

==, = ..

.=,

• ....

_, _

Example

H_
Example

.....

........
.®

.®
_} Item displayed in yellow
= This indicates the item currently selected
• Press ENTER to go to the adjustment screen for this
item
_); Item in brackets
This indicates the current setting for the item

The bar above is an operational
guide for
the remote control
The menu
bar will
change
in
_rdance
with each
setting
screen.

._1}Press

4/Ib- to select the desired

item.

_.2_Press

&/T

to select the desired

item.

_._ Press

_/_,

to adjust the item.

Using the remote control
Use the following buttons on the remote
operate the menu.

_)i Item displayed in white
• This indicates that the item can be selected

I
|

_} Item displayed in gray
This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
Nothing is connected to the selected input terminal,
The function is not compatible with the current input
signal,

• Menu options differ in the selected input modes, but the
operating procedures are the same,
• The screens in the operation manual are for explanation
purposes some are enlarged, others cropped and may
vary slightly from the actual screens.

Using the control
panel of the main unit
You can also operate the menu with the control
of the main unit.

control to

panel

Button operations
on the control panel correspond
the ones on the remote control as shown below.
MENU: MENU on the
remote control
INPUT: ENTER on the
remote control.
MENU:

Press to open or close the menu screen

A/T/_i/_:

Press to select a desired item on the screen or
adjust a selected item

ENTER:

Press to go to the next step or complete the
setting

RETURN:

Press to return to the plevious step

CH/_/V:

VOL+/-

Cursor A/T
on the remote
control.
: Cursor _/_
on the remote
control

On-Screen

Display

Adjusts

the

=
picture

following

picture

Example

[ _
[

to your

preterence

with

Automatically
adjusts the brightness ot the screen.
Off: The brightness is fixed at the value set in "Backlight"
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen

the

settings.

Pl6¢ure

When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness, Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense sur/ounding light
When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness
When set to "On" or "On: Display", the OPC indicator on
the %/lights green

This TV provides various advanced
optimizing the picture quality.
1

Press MENU to display the MENU screen,
press 4/_,. to select "Picture".

Press _k/_' to select a specific adiustment
item.
• Select "Advanced" and then p/ess ENTER to set
"C,M.S. Hue _', "C,M S,-Saturation", "Color Temp ",
"Active Contra_t _',"VP Setting", "Film Mode", "3D Y/C",
"Monochrome" or "Range of OPC"

Press A/T(or
.4/_-) to select the desired
and then press ENTER.

Press MENU
Seiected Kern
Backligilt
Contrast
Brightness
Color
Tint
Sharpness

tot

and then
Color tone is managed using the six color adiustment
setting.
C,M,S,-Hue: This is a standard to adjust the color either
mole reddish or more bluish in tone.
C,M,S,-Saturation:
Incleases or decreases the
saturation of a selected color

setting,

to exit.
button
The screen dims

functions

For less contrast
For less
brightness
For less color
intensity
Skin tones
become reddish
For less

The screen
brightens
For more contrast
For mote
brightness
For more color
intensiW
Skin tones
become greenish
For more

sharpness

• For resetting all adjustment items to the facto/y pleset
values, press A/_' to select "Reset", and then press
ENTER,

For a better
correction.
Nigh:

white balance,

use color temperature

White with bluish tone

Middle:
Mid-Nigh:
Mid-Low:
LOW:

For resetting all Pictule adjustment items to the factory
preset values, pless h./_" to select "Reset", press ENTER,
press 4/b- to select "Yes", and then press ENTER

Automatically
the scene.

White with/eddish

adiusts

tone

the image contrast

according

On: Automatically adjusts the image contrast.
Off: No adjustment.

On-Screen

Display

Converts input signals depending
on the type of
images.
Fast: Suitable for fast-moving images
Slow: Suitable for smooth images with low amounts of
flickers

You can adjust the sound quality
with the following settings.

Example[

to your preference

(_ Audio

"I/P Setting" is not selectable when channel display shows
an input resolution of 480P, 720P or 1080P.

Automatically
detects a film-based source (originally
encoded at 24 frames/second),
analyzes it then
recreates each still film frame for high definition picture
quality.
On: Detects, analyzes, converts film source
Off: Normal viewing mode
"Film Mode" does not function when you set the "AV Mode"
to "Game",
"Film Mode" is not selectable when channel display shows
an input resolution of 4SOP, 720P or 1080P.

Provides high quality images with minimal
and cross color l/oise.

Press A/_'
(or _/_)to
and then press ENTER.

SD Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).

_ro:

The brightness
level range of the OPC sensor's
automatic adjustments
can be set according to your
preferences.
The adjustment
range of the OPC sensor can be set to
a maximum of +16 and a minimum of 16.
15through

Press MENU

select the desired

setting,

to exit.

Treble

For weaker treble

For stronger treble

Bass

For weaker bass

For stronger bass

Balance

Decreaseaudio from
the nght speaker

Decrease audio from
the lefr speaker

® Audio menu is grayed out when Output Select is set to
"Variable".
For resetting all Audio adjustment items to the factory
preset values, press &/_ to select "Beset", press ENTER,
press _/i_ to select "Yes", and then press ENTER

For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.

16through

Press _/_
toselect
a specific adjustment
item.
Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item

Off (2D): For Game Mode

Min.:

Press MENU to display the MENU scree_k and then
press _/_
to select "Audio".

dot crawl

Slow: For still images.
Standard: Normal adjustment
Fast: For moving images.

Max,:

1
2

Surround function allows you to enjoy realistic
On: Surround function is on
Off: Normal sound

"live" sound.

Audio menu is grayed out when Output Select is set to
"Variable".
For some discs, setup may be required on your DVD player
In this case, please refer to the operation manual of your
DVD player.

+16
+15

The range of OPC settings are active only when the OPC is
set to "On".
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting
Depending on the brightness ofthe surrounding light, the
OPC sensor might not operate if the adjustment range is
small

This function allows you to enjoy bass enhanced
On: Bass Enhancer function is on

sound.

Off: Normal sound
Audio menu is grayed out when Output Select is set to
"Variable"

On-Screen

Power

Display

control setting

Example I _

allows

PowerControl

Press MENU to display the MENU screen,
press _/_,
to select "Power Control".

Press A/_'
to select a "No Signal Off" or "No
Operation Off", and then press ENTER.

Press _/_ENTER.

Press MENU

to select "Enable",

where you plan to install the %/
Ifyou select "Home", AV MODEis set to "STANDARD"
Ifyou select "Store", AVMODE is setto "DYNAMIC(Fixed)"
Incase no remotecontrol signal is receivedwithin 30
minutes, AVMODE will change to "DYNAMIC(Fixed)"
automatica%
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable"
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area¸

and then

and then press

See "Initial Setup" on page 11 for setting each item.
If no channel isfound, confirm the type of connection made
with your TV and try E7 Setup again¸
Ifyou select "Analog Search Start" and initiate the channel
search, the OH Memory for Cable Digital will be deleted

to exR.

When set to"Enable",
down

You can run EZ Setup again, even alter setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish)¸
TV Location: Select "Home" or "Store" for the location

you to save energy.

the power

wHI automatically

shut

r_there is no signal for 15 minutes.

Five minutes before the power shuts down, the remaining
time displays every minute.
"Disable" is the factory preset value.
When a TV program finishes, this function may not operate

When set to "Enable", the power will automatically
down if there is no operation for 3 hours.

If initial setup does not memorize all the channels in
your region, follow the instructions
below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable"
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area

shut

CH Memory: You can sdect the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable)
On: Skips channels [Channelselection disabledusing ON

• Five minutes before the power shuts down, the remaining
time displays every minute
• "Disable" is the factory preset value

A/V)
Off: Doesnot skipchannels (Channelselection enabledusing
CHA/V)

Example

Setup

See "Initial Setup" on page 11 for setting each item.
If no channel isfound, confirm the type of connection made
with your TV and try channel search again.
Ifyou select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.

In order to receive digital air broadcasts,
you need
a digital broadcast antenna. You can confirm the
antenna configuration
through the "Antenna Setup
DIGITAL" screen. If necessary,
adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel
1

Press MENU to display the MENU screen,
press 4/_
to select "Setup".

Press A/_'
to select a specific adjustment
item,
and then press ENTER.
• When you select "EZ Setup", "OH Setup", "Parental
CTRL" and "Reset", you can enter the 4 digit secret
number here See page 21 for setting a secret number.

Press A/_'
(or 4/_)to
and then press ENTER.

Press MENU

select the desired

and then

Channel Strength: Input the 2-digit channel number
to check the signal strength of the selected channel
Make sure the signal is strong enough for each
channel
This function isavailablefor DIGITAL (AIr)only

setting,

to exit.
19

On-Screen

Display

This setting allows you to skip the HDMI or PC IN Input
("Input 4 (HDMI)", "Input 5 (HDMI)" and "Input 6 (RGB)")
on the Input Selection operation.
Yes: Skips the input,
No: Does not skip input.

Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
A/T/41/_.
to select the new name for the input
mode.
You cannot change labels if the INPUT SOURCE is TV,

Some input signals may have to be registered manually
to display properly. The pair of input signals (resolutions)
in the fist below is not distinguishable
when received.

For adiusting a picture's horizontal and vertical
position.
H-Pos.: Centers the image by moving it to the left or
right
V-Pos.: Centers the image by moving it up or down

In such a case, you have to set the correct signal
m_nually. After setting once, it will display when the
same signal (resolution)
El 024 x 768

is input

again.

1360 x 768

For resetting adjustments to the factory preset vak_es,
press _./T to select "Reset", and then press ENTER
When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted It cannot be
manually adjusted.
The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen
Adjustments are stored separately according to input
source.

• You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.

For _utomatically
adjusting the PC image.
Yes: Auto Sync. starts and "Now adjusting the image"
displays
No: This function does not work.

You can also select a language from the Setup menu.
Select from among 3 languages:
English, French and
Spanish.

When Auto Sync is successful, "Completed" displays If
not, Auto Sync. failed
Auto Sync. may fail even if "Completed" displays
Auto Sync may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.

If complex adiustments
are made and the seltings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1

_
Ordinarily you can easily adiust the picture as
necessary to change image pos_ion using Auto Sync.
In some cases, however,
manual adjustment
is needed
to optimize the image.
H-Pos.: Centers the image by moving it to the left or
right,

"Return
screen.

to the factory

preset

values"

displays

on the

If you have already set the Secret No., input the 4-digit
secret number here See page 21 for setting a secret
number
Select "Yes".

"Now, TV will restart automatically
screen
Select "Yes".

OK?" displays on the

"Now initializing,.," displays on the screen and blinks,
After the reset has been completed, the power shuts off
and then comes back on. The screen will have returned
to its original settings

V-Pos.: Centers the image by moving it up or down
Clock: Adjust when the image flickers with vertical
stripes,
Phase: Adjust when characters have low contrast or
when the image flickers

The
The
The
The

• For resetting all Fine Sync adjustment items to the factory
preset values, press A/T to select "Reset", and then press
ENTER
it is not necessa/y to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
The default cursor position may not be in the center,
because the scYeen position variable ranges may be
asymmetrical.
The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position setting screen

Channel Setup settings will not be changed
language settings will not be changed.
Secret number settings will not be changed
TV Location Settings will not be changed

On-Screen

Display

IMPORTANT:
Three conditions

must be met to enable the V Chip/see

pages 21 to 23):
1. Secret No. is registered.
The 'V Chip (DTV Only)" will only be selectabie when
a new lating system can be downloaded via digital
broadcasting in the U.S.
2. V Chip/V Chip (DTVOnly} settings have been made
3. "Status" is set to "On"
[] New Secret
No.
You can set and change the secret number by using 0-9.
input Secret No,: When you change the secret number.
enter the old 4 digit secret number here The cursor
moves to "New Secret No.".
New Secret No,: When you set the new seclet number,
enter the new 4 digit secret number here The culsor
moves to "Reconfirm".

V CHIP is an electronic filtering device built into your
TV. This tool gives parents a great degree ot control
over broadcasts
accessed
by their children. It allows
parents to select programs judged suitable tot child
viewing while blocking ones judged not suitable. It
does so automatically
once you activate the V CHIP
feature in your TV. "V Chip" and "Status" will not be
selectable from the menu if you do not first configure
your secret number.
The U.S. has two rating systems for viewing content: TV
Parental Guidelines and movie ratings.
The TV Parental Guidelines wo/k in conjunction with the
V CHIP to help parents screen out inapp/opriate television
shows flom their children.
Movie ratings ale used for original movies rated by the
Motion Picture Association of America (MPAA) as watched
on cable TV and not edited for television. The \/CHIP can
also be set to block MPAA rated movies
_f?SS
The setting automatically enters "Block" for any ratings
below your selection.
if Status is not set to "On". the configuration settings will
not work
[] MPAA

{Vomuntary

movie

rating

system)

Example

Reconfirm:
Enter the same 4 digit number you set in
"New Secret No."
[] Secret No. Clear
You can clear your secret null}bet.
Yes: Your secret number is cleared
No: Your secret number is not cleared

As a p_cautionary measu_, make a note of your sec_t
number and keep it in a familiar place
If the secret number is clealed, the Status setting
automatically sets to "Of/". "V-Chip" and "Status" will not be
selectable t/om the menu.

Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not first configure your secret
On: Enables Palental CTRL
Off: Disables Parental CTRL

number.

Press ,t,/T to adjust the item to your desired pos_ion.
"_." indicates the item is blocked. Press MENU to exit.
G: General audiences All ages admitted
PG: Parental guidance suggested. Some material may not be
suitable for children.
PG-13: Parents strongly cautioned Some material may be
inappropriate for child/en under 13.
R: Restricted. Under 17 requires accompanying parent or
adult guardian (age varies in some jurisdictions)
NC-17: No one 17 and under admitted.
X: X is an older rating that is unified with NC 17 but may be
encoded in the data of older movies.
• Voluntaly movie rating system only uses an age based
rating

On-Screen
Display
Menu
[] TV Parental

Guidelines

C_madian Rating Systems (Canadian English ratings
and Canadian
French ratings)
The TV rating systems in Canada are based on the
Canadian Radio Television and Telecommunications
Commission (CRTC) policy on violence in television
programming.
• While violence is the most important content element to
be rated, the structure developed takes into consideration
other plogram content like language, nudity, sexuality and
mature themes.
• When setting the V CHIP on the Canadian system you can
choose either the Canadian English ratings or the Canadian
French ratings

Example

PressA/T

to adjust

"_" indicates

the item to your desired

the item is blocked.

Press

position.

to exit.
[] Canadian

Suggested
age
TV-Y: All children.
TV-Y7: Directed to older children.
TV-G: General audience.
TV-PG:

Parental

Guidance

English

Ratings

Example

suggested.

TV-I 4: Parents strongly cautioned.
TV-MA: Mature audience only.
Example

Press &/Y
to adjust the item to your desired position.
"t_" indicates the item is blocked. Press MENU to exit.
E: Exempt: Includes news, sports, documentaries and other
info/mation programming; talk shows, music videos, and
variety programming.
C: Children: Intended for younger children under the age of 8
yea/s, Pays caleful attention to themes that could threaten
their sense of security and well-being.
C8+: Child/en over 8 years old: Contains no portrayal
ot violence as the p/eferled, acceptable, or only way
to resolve conflict; nor encourage children to imitate
dangerous acts which they may see on the scleen.
G: General: Considered acceptable for all age groups
Appropriate viewing for the entire family, contains very little
violence, physical, verbal or emotional
PG: Parental Guidance: Intended for a genera] audience, but

When setting an individual content-based
rating item:
1 Press _ or ENTER to access blocked content
items from the currently selected age based rating
item.
2

PressA/T
to select an individual item, and then
press ENTER to unblock it ("_" is removed). Repeat
the same steps for the other items.

Press _l or RETURN to register
content rating items are set.
Content

alter all individual

FV: Fantasy violence.
V: Violence.
S: Sexual situation.

may not be suitable for younger children (under the age of S}
because it could contain controversial themes or issues

L: Adult language.
D: Sexually suggestive

14+: Over 14 yeals: Could contain themes whe/e violence
is one of the dominant elements ot the storyline, but it
must be integral to the development of plot or character
Language usage could be p/crane and nudity present
within the context of the theme,

dialog.

iiiiiiiiiiiiiiiiiii

:_ati

18+: Adults: Intended for viewers 18 years and older and
might contain depictions of violence, which while related to

TVY

[]

TV Y7

[]

TVG

[]

TV PG

TV14

...............................................................................
TVMA
X
X

[]

the development of plot, character or themes, are intended
for adult viewing. Could contain graphic language and
port/ayals of sex and nudity

: The content rating can be set, but this rating is not
normally broadcast
by TV stations.

X : Content

rating can be set.
22

On-Screen
Display
Menu
[] Canadian

French

Ratings

Example

optlor_

Press A/T
to adjust the item to your desired position.
"_" indicates the item is blocked. Press MENU to exit.
E: Exempt p/ogramming,
G: General: All ages and child/en, contains minimal di/ect
violence, but may be integrated into the plot in a humorous
or unrealistic manner.
8ann+: General but inadvisable for young children: May
be viewed by a wide public audience, but could contain
scenes disturbing to child/en under 8 who cannot
distinguish between imagina/y and real situations
Recommended for viewing with palent,
13ann+: Over 18 years: Could contain scenes d frequent
violent scenes and therefo/e recommended for viewing with

release

the V-CHIP

BLOCK

You can reactivate the temporarily
BLOCK as shown below.

released

Press MENU

setting,

to exit.
Only".

to music from a music program,

you

Produces a clearer video image.
Off: No adjustment
Nigh: For enhanced Digital Noise Reduction
Low: For moderate Digital Noise Reduction

Input the 4 digit secret number by using 0-9. At this
time V CHIP BLOCK temporarily
releases.
the temporarily

Press A/T
(or 4/_-) to select the desired
and then press ENTER.

The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed

1 Press ENTER while the V CHIP is working, and
then the secret number setting menu displays.

[] Reactivating
BLOCK

adiustment

can turn the screen off and enjoy audio only.
On: Audio is output without screen image,
Off: Both screen images and audio ale output

When the V CHIP BLOCK is working and censors a
broadcast,
"V CHIP HAS BEEN ACTIVATED."
displays.

item and

When listening

18arts+: Over 18 years: Only for adult viewing. Could contain
frequent violent scenes and extreme violence
to temporarily

and then

Press A/T
to select a specific
then press ENTER.

Skip this step for "Audio

pa/ent
16arts+: Over 16 years: Could contain frequent violent scenes
and intense violence

[] How

"E Press MENU to display the MENU scree_,
press _/I_, to select "Option".
2

V-CHIP

....

_ .....

This f_nction displays the elapsed game time so you do
not lose track of the time. To display the elapsed time,
select "GAME" for the AV MODE before starting the game.
On: The elapsed time is displayed every 30 minutes when
you switch to GAME mode in external input mode
Off: No adjustment.

released V CHIP

Select "Status" setting fiom the Pa/ental CTRL menu to
reactivate BLOCK, (See page 21 )
Select "V Chip" setting ("MPAA", "_V Guidelines", "Can
English Ratings" or "Can, French Ratings") from the
Pa/ental BTRL to reactivate BLOCK, (See pages 21 to 2_€)
Switch off the TV power

This function locks the operation
and the remote control.

buttons

on the TV

Off: No adjustment.
RC Control Lock: Allbutton_on the remotecontrol are locked

Performing any of the three above will activate the VCHIP
BLOCK

Button Control Lock: All buttons on the TV, except
POWER ale locked,
• To unlock the buttons on the remote control, pless MENU
on the T_/, and then select "Off" on the MENU screen
To unlock the buttons on the TV, press MENU on the
remote control, and then select "Off" on the MENU screen

On-Screen
Display
Menu
if the image does not come in clearly from the external
equipment
connected
to INPUT 1 or 3, you may need
to change the input signal type setting from the list
below:
Auto/COMPONENT/VIDEO

This function allows you to adjust the closed
caption screen appearance
to suit your preference.
You can adjust 7 items: "Caption Size", "Font
Style", "Foreground
Color", "Foreground Opacity",
"Background
Color", "Background
Opacity" and
"Character Edge".
Example:
Selectable items available for "Font Style".

if the selected signal type is incorrect, images are not
displayed at all or are displayed without any color.
Refer to your external equipment operation manual for the
signal type
Ifyou set iNPUT 1 or 8 to Auto, the TV will automatically
select the input signal
Setting INPUT 1 or 3 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority
INPUT f orS:
_1
_ COMPONENT VIDEO
'_" VIDEO

TO watch
"INPUT4"

Default: The font specified by broadcasting
default font.
Type
Type
Type
Type
Type
Type
Type
Type

an HDMI or PCqN equipment
image, select
or "INPUTS" from "INPUT SOURCE" menu

using INPUT on the remote
Auto View:

control

For resetting adjustments to the factory preset vak_es,
press A/T to select "Reset", and then press ENTER.
The default value depends on the broadcasting station

unit or on the TV.

Enable: To use View Mode based on signal
recognition, including an HDMI signal
Disable: No function

This function

Audio Select:
Digital: For an audio signal via the HDMI tetmina]
Analog: For an audio signa] via the R AUDIO L
terminal

information
viewed.

of digital closed caption
program

Select the CH display when changing
digital broadcasting.
Yes: "Program Info," displays.
No: "Program Info." does not display,

Allows you to select what controls the audio output.
Fixed: Sound via speaker is adjusted with VOL+/on
the remote control unit or VOL + / - on the TV
Sound via the AUDIO OUTPUT terminal is not
adjustable and outputs at a consistent level
Variable: Sound via the AUDIO OUTPUT terminal is

being

channels

for

This function allows you to program 4 favorite
channels, in 4 different categories.
By setting the
favorite channels in advance, you can select your
favorite channels easily.
To register your favorite channel:
Select "Register" and then press ENTER, Press &/_'/_/
to select the position in the category and then press
ENTER to register.
To delete your favorite channel:
Select "1 Data Clear" and then press ENTER. Press

on the remote control unit or

Sound via speaker is muted

Select the video signal system compatible
equipment
from the list below:
Auto/NTSC/PA
L-M/PAL- N

allows viewing

for the digital broadcast

This list is not displayed for analog broadcasts or external
input audio/video.
This information is not included in OO1,002, Text1, or
Text2, and is not displayed in a list

Refer to your external equipment operation manual for the
signal type
"Audio Select _'is only available for INPUT 5.
When connecting an HDMI DVI conversion adapte//cable
to the HDMI terminal, the image may not come in clearly.

adjusted with VOL+/VOL+/on the 7V,

station or

O: Proportiona] font used in the MENU screen
f: Monospaced with serifs.
2: Propo_iona]ly spaced with serifs
3: Monospaced without serifs
4: Proportiona]ly spaced without serifs,
5: Casua] font type
6: Cursive font type
7: Small capita]s

with your

A/T/4/_
to select the channel you want to delete, and
then press ENTER, Select "Yes" and then press ENTER,
To delete all the favorite channels, select "All Data Clear"

• "Color System" can only be set for the INPUT 1 VIDEO,
INPUT 2 and INPUT 3 VIDEO
Ifyou have already set the Secret No., input the 4-digit
secret number here See page 21 for setting a secret
number

Before setting the channel, select the channel you want to
register as a favorite channel

On-Screen

D _

Display

•

This setting allows you to optimize
Dig_al broadcasting.

the settings

This function allows soltware updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the TV.

To check for the availability/of a software update, visit
w_cw.sharpusa.com.
If you have any questions, please
call 1 800-BE-SHARP
(800 237 4277).

Example
[_

Digital Setup

Press MENU to display the MENU screen,
press 4/_.
to select "DEgital Setup".

and then

Press A/_'
toselect
a specific
and then press ENTER.

item,

Press A/_'
(or 4/_)to
and then press ENTER.

Press MENU

adjustment

select the desired

Do not remove the USB memory device or unplug the
AO cord while the software is being updated.
• Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
rnel-nory device and software updating will fail.
1

Insert the USB memory device with the update
into the SERVICE terminal on the TV.

Press MENU to display the MENU screen,
then press _/_.
to select "Digital Setup".

Press A/T
to select "Software
press ENTER.

setting,

file

to exit.

You can output digital audio to an AV ampfifier or
sEmflar device whose DIGITAL AUDIO INPUT termEna]
is connected
to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible
with the audio format of the program you
are watching and the equipment
connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM",
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form, It reproduces sound from
surround program of digital

Update",

and

and then

If you have alleady set the Secret No, go to step 4
The current

version

of the TV software

is displayed.
I

i_:_

Digital

Software

Input
I_

the
Digital

Setup

Update

4 digit

secret

number

using

0-9.

Setup

Press ENTER to start checking
USB memory device.

the data in the

On-Screen
6

Dudng

Display

the data checking,

"Checking"

7 PressENTER

blinks.

to start updating.
The scleen becomes dark for a while until the update
screen can be displayed Please wait for the update
screen to appear Do not unplug the AC cord,

The current version of the _V softwale and the velsion
d the update file on the USB memo/y device are
displayed, To update the TV software with the update
file, select "Yes", and then press ENTER

Example

Do not remove the USE memory device or unplug the
AC cord while tile software is being updated.

If the USB memoly device is not properly installed or
the corlect update file cannot be found on the USB
memory device, an error message is displayed.
• Check the file on the USE memory device, and then
reinsert the USB memory device correctly

When the software is succesdufly
updated, a
scree_ is displayed indicating that the update
process is completed.
After this screen is displayed, the TV automatically
turns off and then turns on again.

If the update has failed, check the file in the USB
memory device and tly Softwale Update again

After the screen shown
ENTER.

Remove

below is displayed,

the USB memory

device.

press

Appendix

Problem

PossibleSolution

• No power

• Check if you pleased POWER on the remote control unit. (See page 11) If the
indicator on the TV does not light up, press POWER on the TV
• is the AC cord disconnected? (See page 7.)
Has the power been turned on? (See page 11)

Unit cannot be operated

External influences such as lightning, static electricity, may cause imp/oper ope/ation.
In this case, operate the unit alter fi/st turning off the power of the %/or unplugging
the AC cold and replugging it in after 1 or 2 minutes.

• Remote control unit does not
operate

• Are batteries inserted with polarity ( i ,
) aligned? (See page 8)
Are batteries worn out? (Replace with new batteries )
Are you using it under stlong or fluorescent lighting?
Is a fluorescent light illuminated near the remote contlol sensor?

Picture is cut off/with sidebar
screen.

Is the image position correct? (See page 20,)
Are scleen mode adjustments such as picture size made correctly? (See page 15.)

• Strange color, light color, or color
misalignment

• Adjust the picture tone (See pages 17 and 18,)
Is the room too bright? The picture may look dark in a/corn
Check the input signal setting. (See page 20)

• Power is suddenly turned off

• is the sleep timer set? (See page 12)
Check the power cont/ol settings. (See page 19)
• The unit's internal temperature has incleased Remove any objects blocking vent or
clean

that is too bright.

No picture

Is connection to other components cor/ect? (See page 10,)
• Is correct input signal source selected after connection? (See page 24)
Is the cor/ect input selected? (See page 24,)
• Is picture adjustment corlect? (See pages 17 and 18.)
= Is "Off' selected in "Audio Only"? (See page 23.)
o Is a non-compatible signal being input? (See page S0.)

No sound

Is the volume too low? (See page 12)
• Is "Variable" selected in "Output Select"? (See page 24)
Have you pressed MUTE on the remote cont/ol unit? (See page 12)

The TV sometimes makes a

This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature This does not affect the %/'s
performance

cracking sound

The error message

about reception

The example of an error message
displayed on a screen

ot broadcast
Error code

Possible

Solution

Failed to receive broadcast,

E202

• Check the antenna cable Check that the antenna is correctly
setup.

No broadcast now,

E208

o Check the broadcast time in the program guide,

Cautions

regarding

use in high and low temperature

environments

When the unfl is used in a low temperatu/e space (eg. room, office), the picture may leave trails or appear slightly delayed
This is not a malfunction, and the unit will recover when the temperature returns to no/real.
Do not leave the unit in a hot or cold location, Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to defo/m and the Liquid Clystal panel to malfunction,
Storage temperature:
4°Fto
140°F(
20°Cto
! 6O°C)

Appendix
m

m _

[] PC control
of the TV
Attach an RS 232C cable cross type (commercially
available) to the supplied Din/D Sub RS 232C for the
connections,

[] Command
format
Eight ASCIIcodes
CR

igits
This

operation

accustomed

system
to

should

using

used

by a person

who

Command

computers

[] Communication

Parameter

conditions

bit

[] Communication
procedure
Send the control commands from the PC via the RS 232C

Return

Commands

not indicated
]TEM

P,_,WE R SE_ING

here are _ot guaranteed

QOMMAND

_ARAMETER

RISIPIW

1 i

,_dMODESELEOTION

m POSfTION

VIE_VMODE

f........
value

Return

code

SURROUND
SLFEp TIMER

QONTROL

_NALOG}
/IPEOT
H'_NNEL
31GIT'_[J

pr_ver (St

It shltc_ to standL_,

(ToJgle)

Itlnput

_vltche_L_'thetOggledtlsthesan/ea

Itlnput

_vltch_,toWpchannelren/aln_a

Inputtelmlnalnumbel(16/

Itlnput

_vltch_,tolNpIJTl

0,_UTOI:VIDEO2OOMPONENT

,_llnputchangelsal_lncludel

0'_UTOI:VIDEO2OOMPONENT

i
=
=

0tT_gle,
I:$TANDARD2:MG,dE3:G&ME4:LEER
5 DYNAMIC[RXed 6: DYNAMIC 7 PC

V iO

i L iM

* i * i

Volume(o60)

m Ip

iO IS

* i*

=
=

=
=
=
i
=
i
=
i

_lgnal t_l_e The ranges can b .......

*i
=
=
=
i
=
i
=
i

*i
i lJ * i
= _ =

i
i
= =
i
i
Di,_i2ip
DIOI21U

*i
....

i
=
i

I
i
I

mode

i
=
=
=
i
=
i
=
i
i
i
=

0CToggle)[AV]
l:SldeBart,_d]2:SStretch[,_d]
3 Zoom [,_d] 4: Stretd_ [,_d] 5: Normal [PC]
r,: Zoom [R_] 7: Stretd_ [R_]
8 Dot b_ on the

range

(ae_lgnatemalorchannel)

.............._...............................

×i

in the

J0
:i:i:i:
il ....
×i

FronthalfofDIGfTDLC,_BLFCH_NNELNO

....._

OiLiOiP

can

,_,Input
¢h_ge
IsInCluded
_ItIsnot
_/dlsplal<
In,_Jr£_Og-hl_eff_llve
inOable 1 135d_lseff_t_/e

(01009999_
(19901

°IHIDIW

_ appears

OAIthoL_Jhltcancl_n_vltlstr.ggleopel_tlonlnlnslde
1: Only available when 43 Ignal Is being InpUt
5 6: Only a_,allable when 43 _lgr_l Is b_qng InpUt
8/PO] ,_/allable except wh_ LXG,_ Is beng InpUt
I&V] One/available when 1080[,p Is being InpUt
9Onlyavallablewhen720pl_lnglnput

3H_,WN

value

s_tllng .....

oCToggle) l:On2Off
0 CToggle) 1:On 3 Off

DjOjl
DiOil
°IHIUIP

(*) appears,

the pr_ltlon

(_40)

i
=
=
=
i
=
i
=
i
i
i
=

i
i
= =
i
i
*i*i*i*
*i*i*i

Lastn/_noB'J)

Thescre_lpr_ltlonvarlablerangesdeC_r_JontheVa_vModeortlle

One/R3

I
_
i
!
_
i
i
!

anlnpUtchangek÷}O
Itls

INPUT6

,_Jtlloughltcanchor_n_vltlstoggleopelatlonlnh/slde

I * I* I
* ! * !* !

3HUP

Oncommanda_epted

oioi_i_,*i*i*i

[

TheP_vel

_,_OT OiOiOi_''i'bi
HANNEL

COHTEHTS

ThePr_verOncomrnandrel_tel

i,_iViD

OIFITIM
I
I

O_,_E_

to operate.

OFF

!T!V!D

WiliDiE
=
=
= =
= =
i
i
= =
i
i
= =
i
i
MIUITIE
,_ iO IS
= =

MUTE

asterisk

is input
the

(0DH)

i=i

p ! H !S ! E

underbar

code

V POSfTION I V I P IO I $1'

numerical

code

characters

responds

,_IVIMID
= =
=
=

VOLUME

Any

Return
four

format
Problemresponse (communicationerror
or incorrect command)

iTiGia

iNiPi

If an

of
b]ank,

setting

P OWR

iNiPil

If an

digits

text
x,

table

P,_,WERONr_,MM,_NDSETTING

•

[] Response
code
NormaJ response

command.

•

present

connector
The %/operates according to the received command and
sends a response message to the PC,
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before sending the

POSITION

The
09,

When
?"
commands,

None

QONTROL

Parameter

When the input parameter is not within an adjustable range,
'ERR" returns. (Refer to 'Response code format".)
Any numerical value can replace the "x" on the table

8bits
None

[] Command

Command

digits:

hput the parameter values, aligning left, and fill with blank(s)
for the remainder, (Be sure that 4 values are input for the
parameter.}

9,600 bps

digits:

[] Parameter

Set the RS 232C communication settings on the PC to match
the TV's communication conditions
The TV's communication settings are as follows:

Parameter

haft of DIGIT,_LO,_BLEOH,_NNELNO

notWdlsplayltwllllnput

Toggleopelatlonofaclo_lcaptlon

enter
indicated

a space
in brackets

ur_der

table

CONTROL

CONTENTS

Deslgnatemlnol

_vltC&to_'_amefLin_lona_OHV}

d_anneb

(0DH)

Appendix

item

Model: LC-46SBS4U
46" screen size class Ac_anced Super View & BLACK TFT LCD
(Diagonal Measurement : 45 6s/64")

LCD panel
Resolution

2,073,600 pixels (1,920 >( 1,080)
TV standard (CCIR)

Receiving
Channel

American TV Standard ATSC/NTSC System

VHF/UHF

VHF2

CATV

1 136ch (non scrambled channel only)

13ch, UHE 14 69ch

Digital
Terrestrial
Broadcast
(SVSB)2 69ch
Digitalcable"1
(64/256OAM)

Audio multiplex

1 185ch (non scrambled channel only)
BTSC System

Backlight

60,000 hours (in default 'STANDARD"

Audio out

15W X 2

mode)

iNPUT 1

AV in, COMPONENT in

iNPUT 2

AV in, S VIDEO in

iNPUT 4

HDMI in with HDCP

iNPUT 5

Audio in, HDMI in with HDCP

iNPUT 6

15 pin mini D sub female connector, Audio in (@ 36 mrs jack)

ANT/CABLE

75 _--_
Unbalance, F Type × 1 for Analog 6/HE/UHF/CATV) and Digital (AIR/CABLE)

Rear
Terminals

DIGITALAUDI0
OUTPUT Optical Digital audio output
OUTPUT

Audio out

INPUT 3

AV in, COMPONENT in

SERVICE

Software update

× 1 (PCM/Dolby Digital)

Side
OSD language

English/French/Spanish

Power Requirement

AC 120 V, 60 Hz (FOR NORTH AMERICA)
AC 110 240 V, 50/60 Hz (FOR OTHERS)

Power Consumption

256 W (06 W Standby with AC 120 V)
TV + stand

61 7 Ibs./28 0 kg

TV only

507 Ibs./28 0 kg

Dimension*2

TV + stand

ON x H x D)

TV only

43 2s/64x 27 SlA4 x 3 7/8inch

Weight

Operating temperature

23/64X 29 59/64

32°F to

12 ls/loinch

104°F (O°C to i 40°C)

Emergency alert messages via Cable ale unleceivable.
The dimensional drawings ale shown on the Spanish operation manual
As part of policy of continuous implovement, SHARP reserves the right to make design and specification changes for product
imp/ovement without prior notice The pedormance specification figures indicated are nominal values of p/oduction units
There may be some deviations from these values in indDidual units

The listed optional accessory is available for the Liquid
Crystal Televbion.
Please purchase it at your nearest shop.
Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability

it is necessary

to set the PC correctly

to display

Resolution

VGA

XGA and WXGA

Horizontal

Frequency

signal. Reter to page 20 to set PC input signaFs.
Vertical

Frequency

VESA Standard

720 x 400

31 5 kRz

7O Hz

640 x 480

31 5 kRz
379 kHz

6O Hz
72 Hz

O
O

375
351
379
481
469

kHz
kHz
kHz
kHz
kHz

75 Hz
56 Hz
6O Hz
72 Hz

O
O
O
O

kHz
kHz
kHz
kHz

75 Hz
6O Hz
70 Hz
75 Hz
6O Hz

O
O
O
O
O

6O Hz
6O Hz
6O Hz

O
O
O

SVGA

800 x 600

XGA

1024 x 768

WXGA

1360 x 768

484
565
600
477

SXGA
SXGA+
UXGA

1280x 1024
1400 x 1050
1600x 1200

64 0 kHz
640 kHz
75 0 kHz

*These 4 formats are not supported by the analog RGB terminal
DDC is a registered trademark of Video Electronics Standards Association
Power Management is a registered trademark of Sun Microsystems, Enc
VGA and XGA are registered trademarks of Intematiorlal Business Machines Corp,

[] Software
composition
The software included in this product is comprised
are held by SHARP or by third parties.

ot various

software

components

whose

individual

copyrights

[] Software
developed
by SHARP and open source
software
The copyrights for the software components
and vadous relevant documents
included with this product that were
developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties,
and other relevant laws. This product also makes use of freely distributed software and software components
whose copyrights are held by third parties. These include sottware components
covered by a GNU General Public
License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.
[] Obtaining
source
code
Some of the open source sottware licensors require the distributor to provide the source code with the executable
soflware components.
GPL and LGPL include similar requirements.
For intormation on obtaining the source code
for the open source software and tot obtaining the GPL, LGPL, and other license agreement
intormation,
visit the
foflowing

website:

htt p://www.sharpusa.com/gpl
We are unable to answer any questions about the source code tot the open source software.
the software components
whose copyrights are held by SHARP is not distributed.
[] Acknowledgements
The following opel/source
software compone//ts
• flnux kernel/busybox/uClibc/zlib/fibpng/libjpeg
CLEARING

THE

If you torget

the secret

1
2

Press MENU
Press _k/T
Update",

SECRET

The

secret

clear the secret number

to select "EZ Setup",

and the Secret number

number

code for

in this product:

NUMBER

number,

to display the MENU

Press and hold both

are included

The source

CH/\

screen,

using the fallowing

and then press

"CH Setup", "Parental
input

_/1_

CTRL",

procedure.

to select "Setup".
"Reset",

"Color System"

or "Software

screen displays.

and VOL + on the TV simultaneously

until the message

appears

on the screen.

r====r===r_
.

* As a precautionary measure, make a note of your seclet number above, cut it from this manual, and keep it in a safe place
3O

Calling for Service
For

10cati0n

customer

of the

nearest

assistance,

LiMiTED
CONSUMER

Sharp

please

call

Authorized
1 800

Service,

or to obtai_

product

literature,

accessories,

supplies,

SHARP.

WARRANTY

LIMITED

WARRANTY

SHARP ELECTRONICS
CORPORATION
warrants to the first aonsumer
purchaser that this Sharp brand
"P_oduct"),
when shipped in its original co_alner, will be free from def_tlve
workmanship
and materials,
either repair the defect or replace the def_tlve
P_oduct or part the_ed with a new or remanufactu_d
purchaser
for parts or Fabor for the pe_od(s) set forth bebw.

Liquid Crystal Display p_oduct (the
and agr_
that it will, at ffs option,
equlvaFent at no cha_e
to the

Thi_ warranty does n_ apply to any appearance
item_ _ the P_oduct or if the sedal number or model number affixed to the P_oduct has
been removed, defaced, changed,
a_te_d or tampered
with. This warranty doe_ not cover in_al_atlon or slgnaF reception
p_ble_ns. This
limited warranty wiFFn_ app_ if the Product has b_n or is being used in a comme_clal setting or application;
this warranty is meant soFe_./
_r the non commercial
household use of the P_oduct by consumers
in their home or residence. If you intend to or Mready use this P_oduct
_r comme_clal purposes or in a commerciM
_ettlng, there are warra_ies
avaiFable to cover your use of this P_oduct, the terms _ which may
vary. Please co.act
1-888-GO-SHARP
for further i_ormatlon.
In order to enforce your rights under this limited wa_anty, you should follow the _eps
purchase to the _e_icer, which pro_ mu_ include the date of purchase.

forth below. You must be able to p_ovlde p_oof of

To the extent permitted
by applicable
_tate law, the wa_a_ie_
_ _rth are in lleu _, and exduslve
_, all other warra_ies,
e×p_es_ or
irr,p_ied. Specifically
ALL OTHER WARRANTIES
OTHER THAN THOSE SET FORTH ABOV EARE EXCLUDED,
ALL EXPRESS AND
IMPUED WARRANTIES
INCLUDING THE WARRANTIES
OF MERCHANTABILITY,
FITNESS FOR USE, AND FITNESS FOR A PARTICULAR
PURPOSE
ARE SPECIFICALLY
EXCLUDED.
IF, UNDER APPLICABLE
STATE LAW, IMPLIED WARRANTIES
MAY NOT VALIDLY BE
DISCLAIMED
OR EXCLUDED,
THE DURATION OF SUCH IMPUED WARRANTIES
IS LIMITED TO THE PERIOD_)
FROM THE DATE OF
PURCHASE
SET FORTH BELOW. THIS WARRANTY
GIVES YOU SPECIFIC LE(_AL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS

WHICH

VARY FROM

STATE TO STATE.

The warranties
gben herein shM_ be the sole and exclusive wa_antles
granted
by Sharp and shal_ be the so_e and exduslve
remedy
available
to the purchaser
and only for the time perlod_ set forth he_eln. No other representations or p_on_ise_ made by anyone a_e
penT, itted. Correction
of defects, in the manner and for the period of time de_rlbed
he_eln, shah con_itute
corr,p_e
fulfillment
of all
liabilities and respon_ibilltles
of Sharp to the purchaser
with resp_t
to the Product, and shal_ constitute
fu_ _ati_factlon
of al_ claln_,
whether based on contract, negligence,
_trlct Iia billty or otherwise. Sharp does not warrant nor _hall Sharp be _iable, or in any way
responsible,
for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,
Jack of reasonable care, alteration, modification,
tampering,
mlsu_e, improper operation or maintenance
or any damages or defects in the
Product which were caused by repairs or attempted
repalr_ perfonT,ed by anyone other than a Sharp authorized se_icer. Nor shall Sharp
be _iab_e or in any way _esponslb_e for any incldenta_ or con_equentla_
economic or property damage. Some _ate_ do n_ allow limits on
warrantle_
or on _emedles for b_each in certain transactions;
in _uch _ates, the _imlts herein may n_ appbz.
THiS

LIMITED

Model

Specific

Your

WARRANTY

IS VALID

ONLY

IN THE FIFTY (50) UNITED

STATES_ THE

DISTRICT

OF COLUMBIA

AND PUERTO

RICO.

Section

Product

Model

Number

& Description:

(Be

46SB54U
sure

LCD
have

Color
thls

T_levlslo

_nformat_on

n
available

when

you

need

service

for

your

Product.)

Warrant,/Period

for

Additional

this

Exclusions

Warranty

Coverage

Where

Obtain

One (1) year parts, 90 days labor

Product:

from
(if

any}:

Service:

From

location
at 1 800

What

TO OBTAIN

Obtain

PRODUCT

from the date of purchase.

In order for the Product to be se_vlced, the Product must be readily available
to the se_icer, free and c_ear of any complex or non standard
installation,
mounting
or other encumbrance
which would unreasonably
interfere with
se_vlclng the Product.
The Se_icer
wi_ remount the Product
after se_vlce,
provided that such remounting
is not into a complex
or non standard in_talla_
tlon. Any addltlona_ _abor and materials required to remove and/or relnstal_ a
Product above and beyond the foregoing
are not covered by thi_ warranty,
may result in addltlonM
charges and are the respon_ibillty
of the consumer.
Image Retention
resu_tlng from a fixed image being displayed
for long
periods of time is not covered
by this Limlted Warranty
(see Operation
Manual on how to prevent this).

Service:

Sharp

Authorized

of the
n_rest
BE-SHARR

Se_ioer
Sharp

_ocated

Authorized

in the
Servicer,

United
please

States.
call

To
Sharp

find
toll

the
fr_

Contact your Sharp Authorized
Se_Jcer to obtain in home setvlce for this
product. The Se_vlcer will come to your location and if n_essary
remove the
unit for repair at the Se_icer's
facility and return the set to you once
completed.
Be sure to have Proof of Purchase available.

INFORMATION

OR PURCHASE
ACCESSORIES
OR VISIT www.shar

AND EXTENDED
pusa.com

WARRANTIES,

SHARP
SHARP ELECTRONICS
Sharp

Plaza,

Mahwah,

New

CORPORATION
Jersey

07430-2135

SHARP CORPORATION

CALL

1-800-

BE-SHARP

i
i
i
i
i
i
!

LIMITED WARRANTY
Consumer E/eotronics Products
Congratulations

on your purchaser

Sharp Elect ro_ics of Call_da Ltd. (hereinafter called "Sharp") gives the following express warranty to the first consumel purchaser Iol _his
Sharp braltd product, when shipped ir_ its oPginal container and sold or distdbuted in Canada by Sharp or by air Authorized Sharp Dealer:
Sharp warrants that this product is flee, under t_ormal use and maintenance, from at_y defects n matodal and workmanship.
If a_y such
defects _hould be found in this product withln the applicable warranty period, Sharp shall, at its option, repair or replace the product as
specified here_n.
This warranty shall not apply to:
(a) Any defects caused or repaFrs required as a result of abusive operation, negligence, accident, improper instamation or inappropr ate
use as outlined in the owner's m_n_al,
(b) Any Sharp product tampered with, modified, adiusted or repaired by any party other than Sharp, Sharp's Authorized Service Centres
or Sharp's Authorized SerVicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not speafied or approved by Sharp, including but not I_mged to
head clean_ng tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the p_oduct including but
not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, t_ays, filters, belts, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface o_ e×Lerior lhat has been defaced or caused by normal wear and tea_,
(6 Any damage caused by external or environmental
cor_d_ior_s, including but not limited to transmission
I_ne/power line voltage o_ I_qu_d
spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes,
(1) Any ir_stallation, setup and/or programmir_g charges.
Should this Sharp product fail to operate during the warranty pedod, warraniy service may be obtained upon delivery of the Sharp product
togeiher with proof of purchase
and a copy of this LIMITED WARRANTY
statement to an Authorized Sharp SeH_ce Centre or an
A_thorized Sharp Sewlcing Dealer. In home warranty service may be provided at Sharp's discretion on any Sharp televlsior_ with lhe
screen size of 27" or larger afzd on any Sharp Over-the-Range
Microwave Ovet_.
Th_s warranty co_st_tutes the entire express warranty granted by Sharp and no other dealer, se_ice centre or their agent or employee is
aulhorized to extend, enlarge or transfer this warranty on behalf of Sharp, To 1he extent 1he law permlts, Share dlsclaims any and aft
lability lor direct or indirect damages or losses or lot any incidenlal,
special or consequential
damages or loss of profits resulting from a
defect in material or workmanship
relating to the product, if,cluding damages for 1he loss of time or use of this Sharp product or the loss
of information.
The purchaser w_Hbe responsible for any removal, re]nstaflat_on, transportation
and insurance costs ]_ourred. Correction of
defects, n the manner a_d per_od el lime described herei_, constitute complete fulfillment of all obllga_ions and responslbilit es of Sharp
to the purchaser with respect to the product and shall constitute full satisiactlon
of all claims, whether based on contract, negligence, stdct
lability or otherwise.
WARRANTY

PERIODS:

Parts & Laboul (exceptions noted)
I yea_
I yea_
I yea_
I yeal (lamp go days)
I yeal
I yeal (magnetron component-4
additional
I year
I yeal

Audio P_oduct
Camcorder
DVD Product
Piojector
LCD TV
Miclowave
Ove_
A_r Purlf_er
Portable Air Conditioner

For
Offers,

more
Sharp

information
Canada

Locations,
Visit
our

Revision

this

Products,

Warranty,

Sharp

Accessory

Extended

Sales

Dealer

please
call
(905)
568-7140
Web
site _ www
sharp
ca

12/16/05

years)

Warranty
or

Service

_HAI'€I=,
_
_

_ s_.wcs

-_'

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 32
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Sun Jun 01 04:11:58 2008
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Sharp LC 46SB54U User Manual LCD TELEVISION Manuals And Guides L0805212

SHARP LCD Television Manual L0805212 SHARP LCD Television Owner's Manual, SHARP LCD Television installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation