Sharp LC 46SB54U User Manual LCD TELEVISION Manuals And Guides L0805212

SHARP LCD Television Manual L0805212 SHARP LCD Television Owner's Manual, SHARP LCD Television installation guides

User Manual: Sharp LC-46SB54U LC-46SB54U SHARP LCD TELEVISION - Manuals and Guides View the owners manual for your SHARP LCD TELEVISION #LC46SB54U. Home:Electronics Parts:Sharp Parts:Sharp LCD TELEVISION Manual

Open the PDF directly: View PDF .
Page Count: 32

SHARP

LC-46SB54U

LiQUiD CRYSTAL

TELEVISION

Z_ OO_ _mr

.,_.,_x................. D | G | T A L ..................................

N0--R124 NYCE

IMPORTANT : Please read this operation manual

before starting operating the equipment.

Supplied Accessories

Make sure the following accessories are provided with the product.

i_xll ,anguages)"AA" size batte/_/( x2)Page8 AC cord (x 1)Page 7

= AEways use the AC cord supplied with the _V.

9Cabb damp (x 1) Stand unit ( x 1)

CabLe tie (:_.1) Page 6

Page 7 J

= AC cord enclosed in this product is for 110 125V. Irl using it on the 125 240V AC. please consult the following.

SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP

6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33125, U.S.A.

-i

To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved

I cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-

CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect.

IMPORTANq_

To aid reporting in case of loss or theft, please record

the TV's model and serial numbers in the space

provided. The numbers are located at the rear of the TV.

I Model No.:

Serial No.:

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrow-head

symbol, within an equilateral

triangle, is intended to alert the

user to the presence of

uninsulated "dangerous voltage"

within the product's enclosure that

may be of sufficient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within a

triangle is intended to alert the

user to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

product.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

CAUTION=

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD,

BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS

PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY

WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY

THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE

MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND

USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER.

A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE.

QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE

THE PRODUCT AND CART COMBINATION TO OVERTURN.

WARNING= FCC Regulations state that any unauthorized changes or modifications to this

equipment not expressly approved by the manufacturer could void the user's authority

to operate this equipment.

CAUTION= This product satisfies FCC regulations when shielded cables and connectors are used to

connect the unit to other equipment. To prevent electromagnetic interference with electric

appliances such as radios and televisions, use shielded cables and connectors

for connections.

Printed in Mexico

TINS-D501 WJZZ

2 08P02-MX-NM

IMPORTANT INFORMATION

DECLARATION OF CONFORMITY:

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-46SB54U

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

TEL: 1-800-BE-SHARP

For Business Customers: URL http://www.sharpusa.com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device,

)ursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radiofrV technician for help.

"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the

National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall

be connected to the grounding system of the building, as close to the point of cable entry as practical."

This product utilizes tin-lead solder, and fluorescent lamp

containing a small amount of mercury. Disposal of these

materials may be regulated due to environmental considerations.

For disposal or recycling information, please contact your local

authorities, the Electronic Industries Alliance: www.eiae.org, the

lamp recycling organization: www.lamprecycle.org or

Sharp at 1-800-BE-SHARP (For U.S.A. only)

Trademarks

, Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of IDolby Laboratories. I

. "HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of IHDMI Licensing LLC." I

. Products that have earned the ENERGY STAR_ are designed to protect the environment through superior Ienergy efficiency. I

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years

of trouble-free operation of your product, please read the important Safety Instructions carefully before

using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage

if improperly handled. This product has been engineered and manufactured with the highest priority on safety.

However, improper use can result in electdc shock and/or fire. In order to prevent potential danger, please

observe the following instructions when installing, operating and cleaning the product. To ensure your safety

and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully

before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed allwarnings.

4) Follow allinstructions.

5) Do not use this apparatus near water.

6) Clean onlywith dry clott_.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachmentdaccessodes specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as poweFsupply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Additional Safety Information

15) Power Sources-This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your product dealer or

local power company. For products intended to operate from battery power, or other sources, refer to the

operating instructions.

16} Overloading- Do not overload wall outlets, extension cords, or integral convenience receptacles as this

can result in a risk of fire or electric shock.

17) Object and Liquid Entry- Never push objects of any kind into this product through openings as they may

touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

18) Damage Requiring Service- Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a) When the AC cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment

of other controls may result in damage and will often require extensive work by a qualified technician

to restore the product to its normal operation,

e) If the product has been dropped or damaged in any way, and

f) Whentheproductexhibitsadistinctchangeinperformance thisindicatesaneedforservice.

19) Replacement Parts-When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

20) Safety Check- Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting-When mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.

iMPORTANT SAFETY iNSTRUCTiONS

• Outdoor Antenna Grounding if an outside antenna is

connected to the television equipment, be sure the antenna

system is g/ounded so as to provide some p/otection against

voltage surges and built up static charges,

Article 810 of the National Bectrical Code, ANSI/NFPA 70,

provides information with regard to p/oper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to g/ounding

electrodes, and requirements for the grounding electrode.

EYAM PLE OE ANTENNA GROUNDING AS PER

NATIONALELECT%CALCOD£ ANSI/NFPA 70

ELECTRODE SYSTEM

/NEC ART 250 PART H)

NEC -- NATIONAL ELECTRICAL CODE

• Turn off the main power and unplug the AC cold tTom the wall outlet befo/e handling,

• scratchUSea softtheClOthpanelandsurface.gentlywipe the surface of the display panel, Using a hard cloth may _ __

• Use a soft damp cloth to gently wipe the panel when it is really dirty.

(It may scratch the panel surface when wiped strongly)

• If the panel is dusty, use an anti-static brush, which is comme/cially available, to clean it

• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to dean it, such materials may damage

the panel surface

• To dean the outer cabinet, use the same method Do not use liquid or aerosol cleaners

• Water and Moisture Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool and the like

• Stand - Do not place the product on an unstable carf, stand, tripod or table. Placing the product on an unstable base

can cause the product to fall, resulting in serious personal injuries as well as damage to the product, Use only a cart,

stand, tripod, bracket or table recommended by the manufacturer or sold with the product When mounting the product

on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the

manufacturer.

• Selecting the location Select a place with no direct sunlight and good ventilation,

• Ventilation - The vents and other openings in the cabinet ale designed for ventilation. Do not cover or block these vents

and openings since insufficient ventilation can cause overheatirlg and/or shorten the life of the product, Do not place

the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings, This product is not

desigrled for builtqn installation; do not place the ploduct in an enclosed place such as a bookcase or rack, unless proper

ventilation is provided or the manufactureCs instructions are tollowed

• The Liquid Crystal panel used in this product is made ot glass Therefore, it carl break when the product is dropped or

applied with impact Be careful not to be illured by broken glass pieces in case the panel breaks

• Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat,

• The Liquid Crystal panel is a very high technology product with 2,078,600 pixels, giving you fine picture details.

Occasionally, a tew non active pixels may appear on the screen as a fixed point of blue, green or red Please note that

this does not affect the performance ot your product.

• Lightning For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods ot time, unplug it ffom the wall outlet and disconnect the antenna This will prevent damage to

the equipment due to lightning and poweMine surges

• Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or whe/e it can fall into such power lines or circuits When installing an outside antenna system,

ext/eme care should be taken to keep from touching such power lines or circuits as contact with them might be tatal

• To prevent fire, never place any type of candle or flames on the top or near the TV set

• To prevent fire or shock hazard, do not place the AC cord under the TV

set or other heavy items. .j_

• Do not display a still picture for a long time, as this could cause an afterimage to remain

• To prevent fire or shock hazard, do not expose this product to dripping _ _'

or splashing.

No objects filled with liquids, such as vases, should be placed on the product

Precautions when transporting the TV

• Be sure to always carry the TV by two people holding it with two hands one hand on each side of the %/

QUICK REFERENCE

• Before attaching (or detaching) the stand, unplug the AC

cord from the AC iNPUT terminal.

• Before performing work spread cushioning over the base

area to lay the TV on This will prevent it from being

damaged

• Attach the stand in the correct direction.

• Do not remove the stand from the _/unless using an

optional wall mount bracket to mount it.

Be sure to follow the instructions, incorrect installation

of the stand may result in tbe 1]/falling over,

I Confirm that there are 8 screws (4 short screws

and 4 long screws) and a hex key supplied with the

stand unit.

tiff

2 Altach the supporting post for the stand unit onto

the base using the box for the stand unit as shown

below.

• The supporting post altaches to the base at an oft centered

location onthe base Be sure to attach the supporling post in

1hedirection indicated below andaltach the stand tothe TV

with the wider side of 1he base facing tor_sard

II TI _L°ng ....... Hexkey

Forwarded,/

:3 1"_Insert the stand into the openings on the bottom

of the TV.

"2' Insert and tighten the 4 short screws into the 4

holes on the rear of the TV.

"r Softcushion _,__",

• ,,

• To detach the stand, perform the steps in reverse order

"- o |-" _| I_ A °

=This _ sbould be mounted on tbe wall only with the

AN-52AG4 (SHARP) wall mount bracket. The use of

other wall mount brackets may result in an unstable

installation and may cause serious injuries.

installing the TV requires special skill that should

only be performed by qualified service personnel

Customers should not attempt to do the work

themselves. SHARP bears no responsibility for

improper mounting or mounting that results in

accident or injury.

Using an optional bracket to mount the TV

• You carl ask a qua<lified service professional about

using an optional AN 52AG4 bracket to mount the TV

to the wall.

• Carefully read the instructions that come with the

bracket before beginning work.

Hanging on the wall

AN 52AG4 wall mount bracket.

See the bracket instructions for details.)

Vertical mounting Angular mounting

About setting the ]_/angle

015710/15120<

• The center of the display:

6 3A inches (174.25 ram)

under the "A" position.

Refer to the operation

manual of AN 52AG4 for

details.

• Detach the cable clamp on the rear of the TV when using

the optional mount bracket.

• To use this TV mounted on a wall, remove the covers at

the 4 locations on the rear of the TV, and then use the

screws supplied with the wall mount bracket to secure the

bracket to the rear of the %/

QUICK REFERENCE

1 Attach your anten_a to the back of the televFsion.

(See page 8.)

2 Connect the AC plug for the television into the AC

outlet.

* Place the TV close to the AC outlet, and keep the power

plug within reach

oTO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES

WITH THE AC CORD CONNECTED.

3Place the Ferdte core in the space Endicated Enthe

below figure and bundle the cords propedy with

the cable clamp and the cable tee.

Use the remote control u_flt by pointing it towards the

remote control sensor on the TV. Objects between the

remote control unit and the remote control sensor may

prevent proper operation.

s°° i-- s°°

3o,

[] Cautions regarding the remote control unit

Do not expose the remote control unit to shock. In addition,

do not expose the remote control unit to liquids, and do not

place in an alea with high humidity,

Do not install or place the remote contlol unit under direct

sunlight, The heat may cause deformation of the remote

contlol unit

• The remote control unit may not work ploperly if the remote

contlol sensor on the TV is under direct sunlight or stlong

lighting. In such cases, change the angle of the fighting

or the TV, or operate the remote control unit closer to the

remote control sensor

4 How to turn on the television for the first time.

A) Press POWER on the television.

B) The POWER indicator on the front of the

televisio_ lights GREEN.

PdOiW ER

= Speakers cannot be detached from the TV

• _/angle cannot be adjusted

IMPORTANT:

The POWER indicator on the television should light GREEN

indicating you have power to the television.

If the POWER indicator on the television still does not light up,

p/ess POWER on the remote control to turn the power on

IMPORTANT:

IF THE UNIT DOES NOT POWER ON UNPLUG THE

TELEVISION FROM THE OUTLET AND REPEAT THE

INSTALLATION STEPS

IF YOU STILL ENCOUNTER NO POWER PLEASE CONTACT

USAT 1 800 BE SHARP

Preparation

To enjoy a clearer picture, use an outdoor antenna. The following is a bdef explanation of the types of con_ectio_s

that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,

plug it into the antenna terminal at the rear of the TV set.

fl A 75-ohm system is generally a round cable with F type connector _F type connector

that can easily be attached to a terminal without tools (Commercially _ 75 ohm coaxial cable (round)

available)

2,A 300 ohm system is a flat "twin lead" cable that carl be attached

to a 75 ohm terminal through a 300/75 ohm adapter (Commercially 300 ohm twin lead cable (flat)

available).

F-type connector should be finger-tightened only. _//_ ,_-_ F type connector

co,/nectorWher'c°nnect"/gtheRFcab'et°theTVset'd°n°tt'ghtenFtyPew,thtools. _X_{ "_,

If tools are used, it may cause damage to your TV set. _he breaking 75-ohm coaxial cable

_of internal circuit, etc.)

fConnecting Antenna Cable

=Connect the antenna cable to the TV using one of the methods in the illustration as shown (_,, '9, _ or _).

HeineAntenna

_Cable without aCA]3/ Cabler_ lead_rl terrrillal(75ohm)

converter [_ coa×ialcable

VHF/UHF antenna (c01nmeciallyavailable

HeineAntenna

tent illal (75 ohm)

[_ Coaxial cable

(commercially available

r3_ Combination VHF/

UHF antenna

_4_ Separate VHF/UHF s0oohm

antenna VHF twin lead cable

ANTErqrqA

Combiner

(comme cially available)

_. To TV antenna

terminal

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

I Open the battery cover. 2 Insert two "AA" size batteries

(supplied with the product).

• Place the batteries with their terminals

corresponding to the ( ) and ( )

indications in the battery compartment,

3Close the battery cover.

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics

Do not mix old and new batteries Mixing old and new batteries can shorten the lite of new batteries or cause chemical leakage

in old batteries,

Remove batteries as soon as they ale worn out. Chemicals that leak from batteries that come in contact with skin can cause a

rash, If you find any chemical leakage, wipe thoroughly with a cloth.

The batteries supplied with this p/oduct may have a shorter life expectancy due to storage conditions

Ifyou will not be using the remote control unit fer an extended period of time, remove batteries f/ore it.

Part Names

[ OPC sensor (See page 17)

/ _owE_ sl _ oPc

III 16o ÷ _ _................OPOnd,oat<$eepage,7_/

...... =_ [ ..............................SLEEP indicator (See page 12,) _

_ , _ _ _ _--- ---- -------- POWER indicator (See page 11_)_

_®

® __iNPUT 3

terminals

v,o

t®

_u,lo

,,®

ib ERvcE

E terminal

-- POWER button

-- MENU button

-- iNPUT button

Channel buttons

,_(CNA/V)

Volume buttons

'-I (VOL+/-)

DIGI_L

87#o

terminal

iI" ................. DiGiTAL AUDIO

OUTPUT terminal

_ NPUT 4 terminal

(HDMI)

INPUT 5 terminaB

_'_ _ (HDMI)

:,®_

-_ NPUT 6 terminals

(PC iN)

Antenna/Cable in iNPUT 1 terminals

[C-

[

p_1

[

AC INPUT terminal

Connecting to External Equipment

You can connect many types of external equipment to your TV like a Blu-ray disc player, HD DVD player, DVD

player, VCR, DEgital %/tuner, HDMI equipment, game console or camcorder. To vbw external source images,

sebct the input source from iNPUT on the remote control unit or on the %/. (See page 14.)

• To protect equipment, always turn off the TV before connecting any external equipment,

• Phase read the rebvant operation manual (Blu-ray disc pbyer, etc) carefully before making connections.

Connecting aBlu-ray disc player, HD_DVD player, DVD player, Digital TV STB (Air or Cable), VCR,

game console or camcorder

NPUT 1_2 or 3 vl_/o AL*_IO

Terminal on extema]

Terminal on the TV Cable equipment

AV cable (commercially available)

NPUT 1 or 3 C_)$PONFNTAUDIO

_® ,.®

INPUT 2S.VlOrOAJ010

INPUT 4 or 5 HiOml

DIGITAL AUDIO DIGITA

OUTPUT ou_u

_,_, Component video cable (commercially available) _

-i_ Audio cable (commercially available) r_X[%_ =,

I1_ S-VIDEO cable (commercially available) ,_r'

_m Audio cable (commercially available) ,_4_

[_I;C_ HDMFcertified cable (commercially available) _T_)j/_

__ Optical fiber cable (commercially availabb) - iJ,

® _®®o

H_ml

Auulo

"1 _ To enjoy 1080p display capability, connect your external equipment using a component cable and set the

equipment to 1080p output.

*2 • The S-VIDEO terminal takes priority over the video terminals. (INPUT 2 only)

*S *When using an HDMPDVl conversion cable, input the audio signal to AUDIO terminal of INPUT 5,

*To enjoy 1080p display capability, connect your Blu-ray disc player, HD DVD player or other external equipment using an

HDMI certified cable and set the equipment to 1080p output.

*4 *Depending on the connected equipment, audio will not output from the DiGiTAL AUDIO OUTPUT terminal in HDMI

connection¸ In this case, set the audio formats of the connected equipment to PCM, 32/44¸1/48 kHz and 16 bits¸

Connecting aPC

Ten'ninal on the TV Terminal on PC

INPUT 6 A Aio__ AUOIO

INPUT 4 or 5 H_ml

Cable

RGB cable (commercially available)

3.5 mm stereo miniiack cable (comme_ial_y available)

HDMbcertifled cable (commercially available) r_.l_}_s,}

H_JIml

*The HDMI terminals only support digital signal.

Refer to page 30 for a list of PC signals compatible with the %/

Watching TV

Press POWER on the TM or on the remote control unit to turn the

power on.

POWER indicator (Green): The TV is on (After a few seconds a window

appears with sound)

• The initial setup starts when the %/powers on for the first time, If the %/has

been turned on before, the E7 Setup will not be invoked See page 19 for

perfo/ming E7 Setup from the Setup menu

Press POWER on the TV or on the remote control unit again to turn the

power off.

The %/enters standby and the image on the screen disappears,

The POWER indicator on the %/turns off

POWER _;_%?

(On/Standby)

If you are not going to use this %/for a long period of time, be sure to remove

the AC cord from the AC outlet.

® Weak electric power is still consumed even when the %/is turned off,

When you turn on the TV for the first time, it will Air/Cable (Antenna setting}

automatically memodze the broadcasting channels Make sure what kind of connection is made with your %/

available in the region where you live. Perform the when selecting "Air" or "Cable"

following steps before you press POWER on the 3 Press _/_ to select "Air" or "Cable"

remote control unit. Press ENTER to enter the setting

1. Insert the batteries into the remote control unit (See page 8) Example

2, Connect the antenna cable to the %/. (See page 8)

g, Plug in the AC cord to the AC outlet, (See page 7 )

Language (Language setting}

Select from among 8 languages: English, French and Spanish

"_ Press &/_' to select the desired language listed on the

screen, and then press ENTER

ON Search (Channel search}

Channel auto search makes the %/look for all channels

viewable in the set area,

4When "Air" is selected in Antenna setting:

Press _1/_ to select "Start", and then press ENTER

TV Location

Select "Home" or "Store" for the location where you plan to

install the %/

2 Press _/_ to select "Home" or "Store"

Pless ENTER to enter the setting

Example

When "Cable" is selected ill Antenna setting:

Press _k/T to select "Analog & Digita] Search Start" to

search both analog and digital broadcasts, or to select

"Analog Search Start" to search only analog broadcasts,

and then press ENTER

If you select "Home", AV MODE is set to "STANDARD"

• if you select "Store", AV MODE is set to "DYNAMIC {Fixed)".

In case no remote control signal is received within 80 minutes,

AV MODE will change to "DYNAMIC(Fixed)_'automatical_/

For changir_g the %/Location after the setting, see "E7

Setup" on page 19

The Channel search will start automatically

• To exit the Channel search screen, select "Cancel", and

then press ENTER

• If no channel is found, confirm the type of connection made

with your %/and try E7 Setup again

(See page 19)

Direct Button Operation

You can change the volurne by pressing VOL+/- on

the TV or on the remote control unit.

To increase the volume, press VOL ÷

• To decrease the volume, pless VOL -

I0> ,_2ol

Audio status

You can turn on the TV or put it on standby by

pressing POWER on the TV or on the remote control

unit. (See page 11 .)

You can change channels by pressing CH/X/V or _9,

(DOT).

Examples:

To select a I or 2-digit cbannel number {e. g., Channel 5):

Press 5_ENT

To select a 3-digit cllannel number (e. g., Channel l 15):

Press 1 _ 1 _ 5_ ENT

To select a 4-digit cbannel number (e. g., Ollanne122.1}:

Press 2 _ 2 _ • {DOT} _ 1 _ENT

• When selecting a 1-digit channel number, it is not

necessary to press 0 before the number

• When you enter 0-9 only, channel selection will be made if

there is no operation within a few seconds

• If you push "0" by itself, nothing will happen.

Complete the above steps within a few seconds,

• When you enter 0-9 and • (DO_, channel selection will be

made if there is no operation within a few seconds

You can select 4 preset favorite channels in 4 different

categories.

Press A, B, Cor D.

• While watching the TV, you can toggle the selected

channels by pressing A, B, Cand D

• See page 24 for details of favorite channel settings.

• When "Output Select" is set to "Variable", the indicator on

the screen changes as shown below

See page 24 for details on the Output Select function.

Mutes the current sound output.

Press MUTE.

• "r_" will be displayed on the screen for 30 minutes, and

the sound is silenced

Within 30 minutes of pressing MUTE, mute can be

canceled by using one of the methods below

Mute will be canceled ifyou press VOL + /- or MUTE.

Mute will be canceled after SOminutes have passed,

However, the TV will not suddenly output a loud sound as

the volume level is set to 0 automatically.

Allows you to set a time when the _V automatically

switches to standby.

Press SLEEP.

• The remaining time displays when the sleep timer has been set

Each time you press SLEEP, the remaining time switches

as shown below.

Off _.30 =_ 60 == 90 =_ 120

When set, the time automatically starts courlting down

Ifyou want to ad ust the sleep timer, you can press SLEEP

twice then change the time setting

Five minutes before the tin-le expires, the remaining time

displays every minute

Select "Off" by pressing SLEEP to cancel the sleep timer.

• The TVwill enterstandby when 1he remaining time reacheszero

When the sleep timer is set, its indicator on the TV lights red

Press FLASHBACK to switch to the previously tuned

channel.

Press FLASHBACK again to switch back to the currently

tuned channel

=FLASHBACK will not work if no channel has been changed

after the %/is turned on

Direct Button Operation

AV MODE gives you 7 viewing options to choose from

to best match the sur_unding environment of the TV,

which can vary due to factors like room brightness,

type of program watched or the type _ image input

f_m external equipment.

Press AV MODE. Current AV MODE displays.

Pless AV MODE again before the mode displayed on the

screen disappears The mode changes as shown below:

Example:

When the input source is 3¥, iNPUT 1, 2 or 3terminals

STANDARD _ MOVIE _ GAME _ USER [TVi

I !

DYNAMIC * DYNAMIC (Fixed)

Example:

When the input source is iNPUT 4, 5 or 6 terminals

STANDARD _, MOVIE _ GAME_ PC

! !

DYNAMIC _ DYNAMIC (Fixed)_ USER[ ..e]

STANDARD: For a highly defined image in a normal

lighting.

[Enhanced Pictu/e Contrast: on]

MOVIE: For a movie

[Enhanced Pictu/e Contrast: oft]

GAME: Lowers image brightness for easier viewing.

[Enhanced Pictu/e Contrast: oft]

PC: For PC

[Enhanced Pictu/e Contrast: oft]

USER: Allows the user to customize settings as desi/ed

You can set the mode for each input source.

[Enhanced Pictu/e Contrast: oft]

DYNAMIC (Fixed}: Changes the image and sound

settings to the facto/y p/eset va]ues No adjustments

are a]lowed

[Enhanced Pictu/e Contrast: on]

DYNAMIC: For a deapcut image emphasizing high

contlast, useful for sports viewing.

[Enhanced Pictule Contrast: on]

You can select a difterent AV MODE item for each input

mode. (For example, select STANDARD for %/input and

DYNAMIC for INPUT 1,)

When you play games, "GAME" is recommended for AV

MODE,

"Enhanced Picture Contrast" technology detects the source

video characteristics and smoothly adjusts the screen

brightness acco/dingly to realize deeper black levels.

[] MTS/SAP stereo mode

The TV h_s a feature that allows reception ot sound

other than the main audio for the program. This feature

is called Multi channel Television Sound (MTS). The TV

with MTS can receive mono sound, stereo sound

and Secondary Audio Programs (SAP). The SAP

feature allows a TV station to broadcast other

information, which could be audio in another language

or something completely dillerent like weather

information.

You can enjoy Hi-Fi stereo sound or SAP broadcasts

where available.

*Stereo broadcasts: View p/og/ams ]ike live sporting

events, shows and concerts in dynam]o stereo sound

*SAP broadcasts: Receive TV b/oadcasts in either MAIN or

SAP sound. MAIN sound: The normal program soundtlack

[either in mono or stereo), SAP sound: Usten to a second

language, supplementary commentary or other information

(SAP is mono sound)

if stereo sound is difficult to hear.

Obtain a clearer sound by manua]ly switching to fixed

mono sound mode

You can change MTS as shown below to match the television

bloadcast signal

Press AUDIO to toggle between audio modes

Examples: when receiving MTS and SAP

STEREO mode: STEREO_ MONO

STEREO + SAP mode: ST[SAP) _ SAP(ST)_ MONO

MAIN + SAP mode: MAIN_ SAP

MONO mode: MONO

[] Digital broadcasting audio mode

The types of audio tlansmitted in a digital b/oadcast include

SURROUND as well as MONO and STEREO. In addition, it

is possible for multiple audio tracks to accompany a single

video track

Pless AUDIO to toggle between audio modes,

Example: when receiving Digital broadcasting

STEREO (Audio1) _ STEREO (Audio2)

I....... SURROUND (Audio3) _-.._11

MTS only operates while in %/mode

Allows you to capture and freeze a moving image that

you are watching.

Press FREEZE.

A moving image is captured.

• Pless FREEZE again to cancel the function

When this function is not available, "No displaying still

image available," will display,

The still image automatically goes out after 30 minutes

Ifyou ale using the freeze function and a b/oadcast

activates the V CHIP BLOCK, the fteeze function will be

canceled and a V CHIP BLOCK message will appear

Direct Button Operation

To view extett/al source images, select the input source

using iNPUT on the remote control unit or on the TV.

1 Press iNPUT.

A list of selectable sources appears

5' Press INPUT again or press h,/T to select the

input source.

• An image from the selected sou/co automatically displays.

Each time INPUT is plessed, the input source toggles,

Ffthe corlesponding inpul is not plugged in, you cannot change

1heinput Be sureto connect the equipmenl beforehand

• See page 10 for external equipment connection

Pless PC to switch to an image from the PC.

Allows you to gain quick access to PC mode.

Press PC.

You can operate the on-screen display menu by using

the following buttons.

MENU: Displays the menu screen.

_,/T/4/_, ENTER: Select a desired item on the

soree//.

RETURN: Returns to the previous menu screen.

EXIT: Turns off the menu screen.

• For operating the on scleen display menu, see "Menu

Operation Buttons" on page 16

Displays channel information being viewed.

Press DISPLAY.

Your TV is equipped with an internal Closed Caption

decoder. It allows you to view conversations, narration

and sound effects as subtitles on your TV. Closed

Captions are available on some TV programs and on

some VHS home video tapes at the discretion of the

program provider.

It is a more flexible system than the original Closed

Caption system, because it allows for a variety

ot caption sizes and font styles. When the Digital

Closed Caption service is in use, it will be indicated

by the appearance ot a 3qetter abbreviation that also

indicates the language of the Digital Closed Captions:

ENG (English), SPA (Spanish), FRA (French) or other

language codes.

Not all programs and VHS videotapes offer closed

captions. Please look for the "_" symbol to ensure

that captions will be shown.

In the Closed Captio_ system, there can be more than

one caption service provided. Each is identified by its

own number. The "CC1" and "CC2" services display

subtitles of TV programs superimposed over the

program's picture.

In the Closed Caption system, the "Text1" or "Text2"

services display text that is unrelated to the program

being viewed (e.g., weather or news). These services

are also superimposed over the program currently

being viewed.

1 Press CC.

This will plesent the Closed Caption information display

2 Press CC while the Closed Caption information is

still on the screen.

Pless repeatedly until you select the desired closed

caption service

information

Example:

If a program has three services (Digital CC(ENG), CCI

and Text1 ), the closed caption display will toggle in this

sequence:

t/3 ENG_ 2/3 OO1_ 3/3 Text1_ Off

The CO button keeps a reco/d of the last service

selected in its memory

If the last closed caption mode (e.g I/3ENG) you

selected is not available for the next program, or on

another channel, the closed caption service that is

available is automatically selected, and this service

appears in parentheses, e.g "1/8(CC1)"

Closed Caption services that appear in palentheses will

not be stored in the CC button's memory as your last

selected service. Only services that you have selected

with the CC button are stored

See page 24 for detailed closed caption settings,

When the program contains no closed caption, " " displays

in the closed caption information.

If the language code, e.g, "ENG", is not found on Digital TV

programs, " "will be shown.

* Four kinds of closed caption service (CCI, CC2, Text1,

Text2) ale potentially available, but a b/oadcast may contain

none or only some dthese services at the discretion dthe

program provider

Direct Button Operation

K_!d_4

YOU csr/select the screen size.

1 Press VIEW MODE.

The View Mode menu displays.

* The menu lists the View Mode options selectable for the type of video signa] currently being received

5' Press VIEW MODE or A/_' while the Vbw Mode menu is displayed to select a desired Rem on the menu.

You can sequentially select a View Mode that has its own aspect ratio

[] For 4:3 programs

Example: Screen size images

Side Bar

Suitable for viewing

conventional 4:3 programs in

their normal tormat,

S.Stretch (Smart stretch)

Suitable for stretching 4:3

programs to fill the screen

Zoom

Suitable for viewing wide-

screen 2,35:1 anamorphic

DVDs in full scleen

Stretch

Thismode is usdul tot 178:1

DVDs,When viewing1,85:1

DVDs, stretch mode will still show

verythin black bands at the top

and boltom dthe screen

[] For HD programs

Stretch: Suitable for viewing wide-screen 178:1 aspect ratio program, stretch mode will still show very thin black bands at

the top and boltom of the screen.

Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on

the screen,

Fun Screen (720p only}: You can select "Full Screen" only when receiving a 720p signal

S,Stretch (Smart stretch}: Suitable for stretching 4:3 programs to fill the screen

Zoom: Suitable for viewing wide screen 235:1 aspect ratio programs in full screen

When using Dot by Dot, it is possible to see noise or bars around different outer portions of the screen Please change view

mode to correct this,

[] For PC input mode

Connect the PC before making adjustments (See page 10)

Selectable screen size may vary with input signal type

Example: Screen size images

Input signal

4:S

Normal

Keeps the original

aspect ratio in afl_ll

screen display

Zoom

Forviewing

widescreen

programs, The top

and bottom of the

image is clopped

Stretch

IO]

An image fully fills the

screen

Dot by Dot

Detects the resolution

of the signal and

displays an imagewith

the same number d

pixels on the screen

Input signal

I16:9

Stretch Dot by Dot

An image fully fills the Detects the resolution

screen of the signal and

displays an image with

the same number of

)ixels on the screen

On-Screen Display Menu

e, ==, = .. .=, • .... _, _ H_

Example Example

..... ........

.®

The bar above is an operational guide for |

the remote control The bar will change in 1

_rdance with each menu setting screen.

._1}Press 4/Ib- to select the desired item.

_.2_Press &/T to select the desired item.

_._ Press _/_, to adjust the item.

.®

_} Item displayed in yellow

= This indicates the item currently selected

• Press ENTER to go to the adjustment screen for this

item

_); Item in brackets

This indicates the current setting for the item

_)i Item displayed in white

• This indicates that the item can be selected

_} Item displayed in gray

This indicates that the item cannot be selected.

There are various reasons why the items cannot be

selected, but the main reasons are as follows:

Nothing is connected to the selected input terminal,

The function is not compatible with the current input

signal,

• Menu options differ in the selected input modes, but the

operating procedures are the same,

• The screens in the operation manual are for explanation

purposes some are enlarged, others cropped and may

vary slightly from the actual screens.

Using the remote control Using the control panel of the main unit

Use the following buttons on the remote control to You can also operate the menu with the control panel

operate the menu. of the main unit.

Button operations on the control panel correspond to

the ones on the remote control as shown below.

MENU: Press to open or close the menu screen

A/T/_i/_: Press to select a desired item on the screen or

adjust a selected item

ENTER: Press to go to the next step or complete the

setting

RETURN: Press to return to the plevious step

MENU: MENU on the

remote control

INPUT: ENTER on the

remote control.

CH/_/V: Cursor A/T

on the remote

control.

VOL+/- : Cursor _/_

on the remote

control

On-Screen Display Menu

= = =

Adjusts the picture to your preterence with the

following picture settings.

Example [ _ Pl6¢ure

[

1 Press MENU to display the MENU screen, and then

press 4/_,. to select "Picture".

2 Press _k/_' to select a specific adiustment item.

• Select "Advanced" and then p/ess ENTER to set

"C,M.S. Hue _', "C,M S,-Saturation", "Color Temp ",

"Active Contra_t _',"VP Setting", "Film Mode", "3D Y/C",

"Monochrome" or "Range of OPC"

3 Press A/T(or .4/_-) to select the desired setting,

and then press ENTER.

4 Press MENU to exit.

button

The screen dims

Seiected Kern

Backligilt

Contrast

Brightness

Color

Tint

Sharpness

For less contrast

For less

brightness

For less color

intensity

Skin tones

become reddish

For less

sharpness

For resetting all Pictule adjustment items to the factory

preset values, pless h./_" to select "Reset", press ENTER,

press 4/b- to select "Yes", and then press ENTER

The screen

brightens

For more contrast

For mote

brightness

For more color

intensiW

Skin tones

become greenish

For more

sharpness

Automatically adjusts the brightness ot the screen.

Off: The brightness is fixed at the value set in "Backlight"

On: Automatically adjusts.

On: Display: Displays the OPC effect on the screen while

adjusting the brightness of the screen

When set to "On", the OPC senses the surrounding light

and automatically adjusts the backlight brightness, Make

sure nothing obstructs the OPC sensor, which could affect

its ability to sense sur/ounding light

When set to "On: Display", OPC effect displays on the

screen while the OPC adjusts the screen brightness

When set to "On" or "On: Display", the OPC indicator on

the %/lights green

This TV provides various advanced functions tot

optimizing the picture quality.

Color tone is managed using the six color adiustment

setting.

C,M,S,-Hue: This is a standard to adjust the color either

mole reddish or more bluish in tone.

C,M,S,-Saturation: Incleases or decreases the

saturation of a selected color

• For resetting all adjustment items to the facto/y pleset

values, press A/_' to select "Reset", and then press

ENTER,

For a better white balance, use color temperature

correction.

Nigh: White with bluish tone

Mid-Nigh:

Middle:

Mid-Low:

LOW: White with/eddish tone

Automatically adiusts the image contrast according to

the scene.

On: Automatically adjusts the image contrast.

Off: No adjustment.

On-Screen Display Menu

Converts input signals depending on the type of

images.

Fast: Suitable for fast-moving images

Slow: Suitable for smooth images with low amounts of

flickers

"I/P Setting" is not selectable when channel display shows

an input resolution of 480P, 720P or 1080P.

Automatically detects a film-based source (originally

encoded at 24 frames/second), analyzes it then

recreates each still film frame for high definition picture

quality.

On: Detects, analyzes, converts film source

Off: Normal viewing mode

"Film Mode" does not function when you set the "AV Mode"

to "Game",

"Film Mode" is not selectable when channel display shows

an input resolution of 4SOP, 720P or 1080P.

Provides high quality images with minimal dot crawl

and cross color l/oise.

Slow: For still images.

Standard: Normal adjustment

Fast: For moving images.

Off (2D): For Game Mode

SD Y/C is available for input signal from Composite Video

and analog broadcasts (air and cable).

_ro:

For viewing a video in monochrome.

On: For viewing in monochrome.

Off: Normal color.

The brightness level range of the OPC sensor's

automatic adjustments can be set according to your

preferences.

The adjustment range of the OPC sensor can be set to

a maximum of +16 and a minimum of 16.

Max,: 15through +16

Min.: 16through +15

The range of OPC settings are active only when the OPC is

set to "On".

The maximum setting cannot be set to a smaller number

than the minimum setting.

The minimum setting cannot be set to a bigger number

than the maximum setting

Depending on the brightness ofthe surrounding light, the

OPC sensor might not operate if the adjustment range is

small

You can adjust the sound quality to your preference

with the following settings.

Example[ (_ Audio

1 Press MENU to display the MENU scree_k and then

press _/_ to select "Audio".

2 Press _/_ toselect a specific adjustment item.

Select "Surround" or "Bass Enhancer" and then press

ENTER to set each item

Press A/_' (or _/_)to select the desired setting,

and then press ENTER.

4 Press MENU to exit.

Treble For weaker treble For stronger treble

Bass For weaker bass For stronger bass

Balance Decreaseaudiofrom Decreaseaudiofrom

the nght speaker the lefr speaker

® Audio menu is grayed out when Output Select is set to

"Variable".

For resetting all Audio adjustment items to the factory

preset values, press &/_ to select "Beset", press ENTER,

press _/i_ to select "Yes", and then press ENTER

Surround function allows you to enjoy realistic "live" sound.

On: Surround function is on

Off: Normal sound

Audio menu is grayed out when Output Select is set to

"Variable".

For some discs, setup may be required on your DVD player

In this case, please refer to the operation manual of your

DVD player.

This function allows you to enjoy bass enhanced sound.

On: Bass Enhancer function is on

Off: Normal sound

Audio menu is grayed out when Output Select is set to

"Variable"

On-Screen Display Menu

Power control setting allows you to save energy.

Example I _ PowerControl

1 Press MENU to display the MENU screen, and then

press _/_, to select "Power Control".

2 Press A/_' to select a "No Signal Off" or "No

Operation Off", and then press ENTER.

3 Press _/_- to select "Enable", and then press

ENTER.

4Press MENU to exR.

When set to"Enable", the power wHI automatically shut

down r_there is no signal for 15 minutes.

Five minutes before the power shuts down, the remaining

time displays every minute.

"Disable" is the factory preset value.

When a TV program finishes, this function may not operate

When set to "Enable", the power will automatically shut

down if there is no operation for 3 hours.

• Five minutes before the power shuts down, the remaining

time displays every minute

• "Disable" is the factory preset value

Example [ _ Setup

1 Press MENU to display the MENU screen, and then

press 4/_ to select "Setup".

2 Press A/_' to select a specific adjustment item,

and then press ENTER.

• When you select "EZ Setup", "OH Setup", "Parental

CTRL" and "Reset", you can enter the 4 digit secret

number here See page 21 for setting a secret number.

3 Press A/_' (or 4/_)to select the desired setting,

and then press ENTER.

4 Press MENU to exit.

You can run EZ Setup again, even alter setting up the

preset channels.

Language: Select from among 3 languages (English,

French and Spanish)¸

TV Location: Select "Home" or "Store" for the location

where you plan to install the %/

Ifyou select "Home", AV MODEis set to "STANDARD"

Ifyou select "Store", AVMODE is setto "DYNAMIC(Fixed)"

Incase no remotecontrol signal is receivedwithin 30

minutes, AVMODE will change to "DYNAMIC(Fixed)"

automatica%

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable"

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area¸

See "Initial Setup" on page 11 for setting each item.

If no channel isfound, confirm the type of connection made

with your TV and try E7 Setup again¸

Ifyou select "Analog Search Start" and initiate the channel

search, the OH Memory for Cable Digital will be deleted

If initial setup does not memorize all the channels in

your region, follow the instructions below to manually

memorize the channels.

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable"

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area

CH Memory: You can sdect the channels to skip in each

ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and

DIGITAL (Cable)

On: Skips channels [Channelselection disabledusing ON

A/V)

Off: Doesnot skipchannels (Channelselection enabledusing

CHA/V)

See "Initial Setup" on page 11 for setting each item.

If no channel isfound, confirm the type of connection made

with your TV and try channel search again.

Ifyou select "Analog Search Start" and initiate the channel

search, the CH Memory for Cable Digital will be deleted.

In order to receive digital air broadcasts, you need

a digital broadcast antenna. You can confirm the

antenna configuration through the "Antenna Setup

DIGITAL" screen. If necessary, adjust the direction of

the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL channel

is displayed. The signal information is based on the

current channel

Channel Strength: Input the 2-digit channel number

to check the signal strength of the selected channel

Make sure the signal is strong enough for each

channel

Thisfunction isavailablefor DIGITAL(AIr)only

On-Screen Display Menu

This setting allows you to skip the HDMI or PC IN Input

("Input 4 (HDMI)", "Input 5 (HDMI)" and "Input 6 (RGB)")

on the Input Selection operation.

Yes: Skips the input,

No: Does not skip input.

Some input signals may have to be registered manually

to display properly. The pair of input signals (resolutions)

in the fist below is not distinguishable when received.

In such a case, you have to set the correct signal

m_nually. After setting once, it will display when the

same signal (resolution) is input again.

El 024 x 768 1360 x 768 J

• You can only select the "Input Signal" on the Setup menu

when receiving one of the 2 input signals listed above.

For _utomatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image"

displays

No: This function does not work.

When Auto Sync is successful, "Completed" displays If

not, Auto Sync. failed

Auto Sync. may fail even if "Completed" displays

Auto Sync may fail if the computer image has low

resolution, has unclear (black) edges, or is moved while

executing Auto Sync.

Be sure to connect the PC to the TV and switch it on before

starting Auto Sync.

Ordinarily you can easily adiust the picture as

necessary to change image pos_ion using Auto Sync.

In some cases, however, manual adjustment is needed

to optimize the image.

H-Pos.: Centers the image by moving it to the left or

right,

V-Pos.: Centers the image by moving it up or down

Clock: Adjust when the image flickers with vertical

stripes,

Phase: Adjust when characters have low contrast or

when the image flickers

• For resetting all Fine Sync adjustment items to the factory

preset values, press A/T to select "Reset", and then press

ENTER

it is not necessa/y to adjust the "Clock" or "Phase" when a

digital signal is being input, so it cannot be selected.

The default cursor position may not be in the center,

because the scYeen position variable ranges may be

asymmetrical.

The screen position variable ranges depend on the View

Mode or the signal type. The ranges can be seen on the

position setting screen

Lets you set the input terminal displayed when using

the INPUT SOURCE menu or channel display. Press

A/T/41/_. to select the new name for the input

mode.

You cannot change labels if the INPUT SOURCE is TV,

For adiusting a picture's horizontal and vertical

position.

H-Pos.: Centers the image by moving it to the left or

right

V-Pos.: Centers the image by moving it up or down

For resetting adjustments to the factory preset vak_es,

press _./T to select "Reset", and then press ENTER

When connecting a PC to the HDMI terminal, the image

position will be automatically adjusted It cannot be

manually adjusted.

The screen position variable ranges depend on the View

Mode or the signal type. The ranges can be seen on the

position-setting screen

Adjustments are stored separately according to input

source.

You can also select a language from the Setup menu.

Select from among 3 languages: English, French and

Spanish.

If complex adiustments are made and the seltings

cannot be restored to normal, you can reset the

settings to the factory preset values.

1 "Return to the factory preset values" displays on the

screen.

If you have already set the Secret No., input the 4-digit

secret number here See page 21 for setting a secret

number

2 Select "Yes".

"Now, TV will restart automatically OK?" displays on the

screen

3 Select "Yes".

"Now initializing,.," displays on the screen and blinks,

After the reset has been completed, the power shuts off

and then comes back on. The screen will have returned

to its original settings

The Channel Setup settings will not be changed

The language settings will not be changed.

The Secret number settings will not be changed

The TV Location Settings will not be changed

On-Screen Display Menu

IMPORTANT:

Three conditions must be met to enable the V Chip/see

pages 21 to 23):

1. Secret No. is registered.

The 'V Chip (DTV Only)" will only be selectabie when

a new lating system can be downloaded via digital

broadcasting in the U.S.

2. V Chip/V Chip (DTVOnly} settings have been made

3. "Status" is set to "On"

[] New Secret No.

You can set and change the secret number by using 0-9.

input Secret No,: When you change the secret number.

enter the old 4 digit secret number here The cursor

moves to "New Secret No.".

New Secret No,: When you set the new seclet number,

enter the new 4 digit secret number here The culsor

moves to "Reconfirm".

Reconfirm: Enter the same 4 digit number you set in

"New Secret No."

V CHIP is an electronic filtering device built into your

TV. This tool gives parents a great degree ot control

over broadcasts accessed by their children. It allows

parents to select programs judged suitable tot child

viewing while blocking ones judged not suitable. It

does so automatically once you activate the V CHIP

feature in your TV. "V Chip" and "Status" will not be

selectable from the menu if you do not first configure

your secret number.

The U.S. has two rating systems for viewing content: TV

Parental Guidelines and movie ratings.

The TV Parental Guidelines wo/k in conjunction with the

V CHIP to help parents screen out inapp/opriate television

shows flom their children.

Movie ratings ale used for original movies rated by the

Motion Picture Association of America (MPAA) as watched

on cable TV and not edited for television. The \/CHIP can

also be set to block MPAA rated movies

_f?SS

The setting automatically enters "Block" for any ratings

below your selection.

if Status is not set to "On". the configuration settings will

not work

[] MPAA {Vomuntary movie rating system)

Example

[] Secret No. Clear

You can clear your secret null}bet.

Yes: Your secret number is cleared

No: Your secret number is not cleared

As a p_cautionary measu_, make a note of your sec_t

number and keep it in a familiar place

If the secret number is clealed, the Status setting

automatically sets to "Of/". "V-Chip" and "Status" will not be

selectable t/om the menu.

Used to enable or disable the parental control function.

This function will not be selectable from the menu if

you do not first configure your secret number.

On: Enables Palental CTRL

Off: Disables Parental CTRL

Press ,t,/T to adjust the item to your desired pos_ion.

"_." indicates the item is blocked. Press MENU to exit.

G: General audiences All ages admitted

PG: Parental guidance suggested. Some material may not be

suitable for children.

PG-13: Parents strongly cautioned Some material may be

inappropriate for child/en under 13.

R: Restricted. Under 17 requires accompanying parent or

adult guardian (age varies in some jurisdictions)

NC-17: No one 17 and under admitted.

X: X is an older rating that is unified with NC 17 but may be

encoded in the data of older movies.

• Voluntaly movie rating system only uses an age based

rating

On-ScreenDisplayMenu

[] TV Parental Guidelines

Example

PressA/T to adjust the item to your desired position.

"_" indicates the item is blocked. Press MENU to exit.

Suggested age

TV-Y: All children.

TV-Y7: Directed to older children.

TV-G: General audience.

TV-PG: Parental Guidance suggested.

TV-I 4: Parents strongly cautioned.

TV-MA: Mature audience only.

C_madian Rating Systems (Canadian English ratings

and Canadian French ratings)

The TV rating systems in Canada are based on the

Canadian Radio Television and Telecommunications

Commission (CRTC) policy on violence in television

programming.

• While violence is the most important content element to

be rated, the structure developed takes into consideration

other plogram content like language, nudity, sexuality and

mature themes.

• When setting the V CHIP on the Canadian system you can

choose either the Canadian English ratings or the Canadian

French ratings

[] Canadian English Ratings

Example

When setting an individual content-based rating item:

1 Press _ or ENTER to access blocked content

items from the currently selected age based rating

item.

2 PressA/T to select an individual item, and then

press ENTER to unblock it ("_" is removed). Repeat

the same steps for the other items.

3 Press _l or RETURN to register alter all individual

content rating items are set.

Content

FV: Fantasy violence.

V: Violence.

S: Sexual situation.

L: Adult language.

D: Sexually suggestive dialog.

iiiiiiiiiiiiiiiiiii :_ati :

TVY [] [] [] [] []

TV Y7 X [] [] [] []

TVG [] [] [] []

TV PG X X X X

TV14 X X X X

...............................................................................TVMA X X X

[] : The content rating can be set, but this rating is not

normally broadcast by TV stations.

X : Content rating can be set.

Press &/Y to adjust the item to your desired position.

"t_" indicates the item is blocked. Press MENU to exit.

E: Exempt: Includes news, sports, documentaries and other

info/mation programming; talk shows, music videos, and

variety programming.

C: Children: Intended for younger children under the age of 8

yea/s, Pays caleful attention to themes that could threaten

their sense of security and well-being.

C8+: Child/en over 8 years old: Contains no portrayal

ot violence as the p/eferled, acceptable, or only way

to resolve conflict; nor encourage children to imitate

dangerous acts which they may see on the scleen.

G: General: Considered acceptable for all age groups

Appropriate viewing for the entire family, contains very little

violence, physical, verbal or emotional

PG: Parental Guidance: Intended for a genera] audience, but

may not be suitable for younger children (under the age of S}

because it could contain controversial themes or issues

14+: Over 14 yeals: Could contain themes whe/e violence

is one of the dominant elements ot the storyline, but it

must be integral to the development of plot or character

Language usage could be p/crane and nudity present

within the context of the theme,

18+: Adults: Intended for viewers 18 years and older and

might contain depictions of violence, which while related to

the development of plot, character or themes, are intended

for adult viewing. Could contain graphic language and

port/ayals of sex and nudity

On-ScreenDisplayMenu

[] Canadian French Ratings

Example Example I_ optlor_

Press A/T to adjust the item to your desired position.

"_" indicates the item is blocked. Press MENU to exit.

E: Exempt p/ogramming,

G: General: All ages and child/en, contains minimal di/ect

violence, but may be integrated into the plot in a humorous

or unrealistic manner.

8ann+: General but inadvisable for young children: May

be viewed by a wide public audience, but could contain

scenes disturbing to child/en under 8 who cannot

distinguish between imagina/y and real situations

Recommended for viewing with palent,

13ann+: Over 18 years: Could contain scenes dfrequent

violent scenes and therefo/e recommended for viewing with

pa/ent

16arts+: Over 16 years: Could contain frequent violent scenes

and intense violence

18arts+: Over 18 years: Only for adult viewing. Could contain

frequent violent scenes and extreme violence

[] How to temporarily release the V-CHIP BLOCK

When the V CHIP BLOCK is working and censors a

broadcast, "V CHIP HAS BEEN ACTIVATED." displays.

1 Press ENTER while the V CHIP is working, and

then the secret number setting menu displays.

2 Input the 4 digit secret number by using 0-9. At this

time V CHIP BLOCK temporarily releases.

[] Reactivating the temporarily released V-CHIP

BLOCK

You can reactivate the temporarily released V CHIP

BLOCK as shown below.

Select "Status" setting fiom the Pa/ental CTRL menu to

reactivate BLOCK, (See page 21 )

Select "V Chip" setting ("MPAA", "_V Guidelines", "Can

English Ratings" or "Can, French Ratings") from the

Pa/ental BTRL to reactivate BLOCK, (See pages 21 to 2_€)

Switch off the TV power

Performing any of the three above will activate the VCHIP

BLOCK

"E Press MENU to display the MENU scree_, and then

press _/I_, to select "Option".

2 Press A/T to select a specific adiustment item and

then press ENTER.

3 Press A/T (or 4/_-) to select the desired setting,

and then press ENTER.

4Press MENU to exit.

Skip this step for "Audio Only".

When listening to music from a music program, you

can turn the screen off and enjoy audio only.

On: Audio is output without screen image,

Off: Both screen images and audio ale output

The screen image will return to normal when a button

(except those for audio adjustment, such as VOL, MUTE,

SURROUND, AUDIO) is pressed

Produces a clearer video image.

Off: No adjustment

Nigh: For enhanced Digital Noise Reduction

Low: For moderate Digital Noise Reduction

t_ _ _ .... _ .....

This f_nction displays the elapsed game time so you do

not lose track of the time. To display the elapsed time,

select "GAME" for the AV MODE before starting the game.

On: The elapsed time is displayed every 30 minutes when

you switch to GAME mode in external input mode

Off: No adjustment.

This function locks the operation buttons on the TV

and the remote control.

Off: No adjustment.

RC Control Lock: Allbutton_on the remotecontrol are locked

Button Control Lock: All buttons on the TV, except

POWER ale locked,

• To unlock the buttons on the remote control, pless MENU

on the T_/, and then select "Off" on the MENU screen

To unlock the buttons on the TV, press MENU on the

remote control, and then select "Off" on the MENU screen

On-ScreenDisplayMenu

if the image does not come in clearly from the external

equipment connected to INPUT 1 or 3, you may need

to change the input signal type setting from the list

below:

Auto/COMPONENT/VIDEO

if the selected signal type is incorrect, images are not

displayed at all or are displayed without any color.

Refer to your external equipment operation manual for the

signal type

Ifyou set iNPUT 1 or 8 to Auto, the TV will automatically

select the input signal

Setting INPUT 1 or 3 signal selection to "Auto" when

other equipment is connected will result in the following

connection priority

INPUT f orS:

_1_ COMPONENT VIDEO

'_" VIDEO

TO watch an HDMI or PCqN equipment image, select

"INPUT4" or "INPUTS" from "INPUT SOURCE" menu

using INPUT on the remote control unit or on the TV.

Auto View:

Enable: To use View Mode based on signal

recognition, including an HDMI signal

Disable: No function

Audio Select:

Digital: For an audio signal via the HDMI tetmina]

Analog: For an audio signa] via the R AUDIO L

terminal

Refer to your external equipment operation manual for the

signal type

"Audio Select _'is only available for INPUT 5.

When connecting an HDMI DVI conversion adapte//cable

to the HDMI terminal, the image may not come in clearly.

Allows you to select what controls the audio output.

Fixed: Sound via speaker is adjusted with VOL+/- on

the remote control unit or VOL +/- on the TV

Sound via the AUDIO OUTPUT terminal is not

adjustable and outputs at a consistent level

Variable: Sound via the AUDIO OUTPUT terminal is

adjusted with VOL+/- on the remote control unit or

VOL+/- on the 7V,

Sound via speaker is muted

Select the video signal system compatible with your

equipment from the list below:

Auto/NTSC/PA L-M/PAL- N

• "Color System" can only be set for the INPUT 1 VIDEO,

INPUT 2 and INPUT 3 VIDEO

Ifyou have already set the Secret No., input the 4-digit

secret number here See page 21 for setting a secret

number

This function allows you to adjust the closed

caption screen appearance to suit your preference.

You can adjust 7 items: "Caption Size", "Font

Style", "Foreground Color", "Foreground Opacity",

"Background Color", "Background Opacity" and

"Character Edge".

Example:

Selectable items available for "Font Style".

Default: The font specified by broadcasting station or

default font.

Type O: Proportiona] font used in the MENU screen

Type f: Monospaced with serifs.

Type 2: Propo_iona]ly spaced with serifs

Type 3: Monospaced without serifs

Type 4: Proportiona]ly spaced without serifs,

Type 5: Casua] font type

Type 6: Cursive font type

Type 7: Small capita]s

For resetting adjustments to the factory preset vak_es,

press A/T to select "Reset", and then press ENTER.

The default value depends on the broadcasting station

This function allows viewing of digital closed caption

information for the digital broadcast program being

viewed.

This list is not displayed for analog broadcasts or external

input audio/video.

This information is not included in OO1,002, Text1, or

Text2, and is not displayed in a list

Select the CH display when changing channels for

digital broadcasting.

Yes: "Program Info," displays.

No: "Program Info." does not display,

This function allows you to program 4 favorite

channels, in 4 different categories. By setting the

favorite channels in advance, you can select your

favorite channels easily.

To register your favorite channel:

Select "Register" and then press ENTER, Press &/_'/_/

to select the position in the category and then press

ENTER to register.

To delete your favorite channel:

Select "1 Data Clear" and then press ENTER. Press

A/T/4/_ to select the channel you want to delete, and

then press ENTER, Select "Yes" and then press ENTER,

To delete all the favorite channels, select "All Data Clear"

Before setting the channel, select the channel you want to

On-Screen Display Menu

D _ .:•

This setting allows you to optimize the settings of

Dig_al broadcasting.

Example [ _ Digital Setup

1 Press MENU to display the MENU screen, and then

press 4/_. to select "DEgital Setup".

2 Press A/_' toselect a specific adjustment item,

and then press ENTER.

3 Press A/_' (or 4/_)to select the desired setting,

and then press ENTER.

4 Press MENU to exit.

You can output digital audio to an AV ampfifier or

sEmflar device whose DIGITAL AUDIO INPUT termEna]

is connected to the DIGITAL AUDIO OUTPUT terminal

on the TV. Please select an audio output format

compatible with the audio format of the program you

are watching and the equipment connected.

PCM: The optical output terminal outputs audio signal

in PCM form. If your digital audio system does not

support Dolby Digital, select "PCM",

Dolby Digital: The optical output terminal outputs audio

signal in Dolby Digital form, It reproduces sound from

surround program of digital

The current version of the TV software is displayed.

This function allows soltware updates by inserting

a USB memory device with the update file into the

SERVICE terminal on the TV.

To check for the availability/of a software update, visit

w_cw.sharpusa.com. If you have any questions, please

call 1 800-BE-SHARP (800 237 4277).

Do not remove the USB memory device or unplug the

AO cord while the software is being updated.

• Be sure to properly follow the whole procedure

described below, step by step. Otherwise, for

example, the TV cannot read the data in the USB

rnel-nory device and software updating will fail.

1 Insert the USB memory device with the update file

into the SERVICE terminal on the TV.

2 Press MENU to display the MENU screen, and

then press _/_. to select "Digital Setup".

3 Press A/T to select "Software Update", and then

press ENTER.

If you have alleady set the Secret No, go to step 4

I i_:_ Digital Setup

Software Update J

4 Input the 4 digit secret number by using 0-9.

I_ Digital Setup

5 Press ENTER to start checking the data in the

USB memory device.

On-Screen Display Menu

6 Dudng the data checking, "Checking" blinks. 7 PressENTER to start updating.

The scleen becomes dark for a while until the update

screen can be displayed Please wait for the update

screen to appear Do not unplug the AC cord,

The current version of the _V softwale and the velsion

dthe update file on the USB memo/y device are

displayed, To update the TV software with the update

file, select "Yes", and then press ENTER

Example

If the USB memoly device is not properly installed or

the corlect update file cannot be found on the USB

memory device, an error message is displayed.

• Check the file on the USE memory device, and then

reinsert the USB memory device correctly

Example

Do not remove the USE memory device or unplug the

AC cord while tile software is being updated.

8 When the software is succesdufly updated, a

scree_ is displayed indicating that the update

process is completed.

After this screen is displayed, the TV automatically

turns off and then turns on again.

If the update has failed, check the file in the USB

memory device and tly Softwale Update again

9 After the screen shown below is displayed, press

ENTER.

10 Remove the USB memory device.

Appendix

Problem

• No power

Unit cannot be operated

•Remote control unit does not

operate

Picture is cut off/with sidebar

screen.

•Strange color, light color, or color

misalignment

•Power is suddenly turned off

No picture

No sound

The TV sometimes makes a

cracking sound

PossibleSolution

• Check if you pleased POWER on the remote control unit. (See page 11) If the

indicator on the TV does not light up, press POWER on the TV

• is the AC cord disconnected? (See page 7.)

Has the power been turned on? (See page 11)

External influences such as lightning, static electricity, may cause imp/oper ope/ation.

In this case, operate the unit alter fi/st turning off the power of the %/or unplugging

the AC cold and replugging it in after 1 or 2 minutes.

•Are batteries inserted with polarity ( i , ) aligned? (See page 8)

Are batteries worn out? (Replace with new batteries )

Are you using it under stlong or fluorescent lighting?

Is a fluorescent light illuminated near the remote contlol sensor?

Is the image position correct? (See page 20,)

Are scleen mode adjustments such as picture size made correctly? (See page 15.)

•Adjust the picture tone (See pages 17 and 18,)

Is the room too bright? The picture may look dark in a/corn that is too bright.

Check the input signal setting. (See page 20)

•is the sleep timer set? (See page 12)

Check the power cont/ol settings. (See page 19)

• The unit's internal temperature has incleased Remove any objects blocking vent or

clean

Is connection to other components cor/ect? (See page 10,)

• Is correct input signal source selected after connection? (See page 24)

Is the cor/ect input selected? (See page 24,)

• Is picture adjustment corlect? (See pages 17 and 18.)

= Is "Off' selected in "Audio Only"? (See page 23.)

o Is a non-compatible signal being input? (See page S0.)

Is the volume too low? (See page 12)

•Is "Variable" selected in "Output Select"? (See page 24)

Have you pressed MUTE on the remote cont/ol unit? (See page 12)

This is not a malfunction. This happens when the cabinet slightly expands and

contracts according to change in temperature This does not affect the %/'s

performance

The error message about reception ot broadcast

The example of an error message Error code Possible Solution

displayed on a screen

Failed to receive broadcast, E202 •Check the antenna cable Check that the antenna is correctly

setup.

No broadcast now, E208 o Check the broadcast time in the program guide,

Cautions regarding use in high and low temperature environments

When the unfl is used in a low temperatu/e space (eg. room, office), the picture may leave trails or appear slightly delayed

This is not a malfunction, and the unit will recover when the temperature returns to no/real.

Do not leave the unit in a hot or cold location, Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to defo/m and the Liquid Clystal panel to malfunction,

Storage temperature: 4°Fto 140°F( 20°Cto ! 6O°C)

Appendix

mm _

[] PC control of the TV [] Command format

Attach an RS 232C cable cross type (commercially EightASCIIcodes CR

available) to the supplied Din/D Sub RS 232C for the

connections,

igits Parameter 4 digits Return code

This operation system should be used by a person who is Command 4 digits: Command The text of four characters

accustomed to using computers Parameter 4 digits: Parameter 09, x, b]ank, ?

[] Communication conditions [] Parameter

Set the RS 232C communication settings on the PC to match hput the parameter values, aligning left, and fill with blank(s)

the TV's communication conditions for the remainder, (Be sure that 4 values are input for the

The TV's communication settings are as follows: parameter.}

9,600 bps When the input parameter is not within an adjustable range,

'ERR" returns. (Refer to 'Response code format".)

8bits Any numerical value can replace the "x" on the table

None

1 bit _When ?" is input f........

commands, the

None _present setting value

[] Communication procedure ,, ,, responds

Send the control commands from the PC via the RS 232C

connector [] Response code format

The %/operates according to the received command and NormaJresponse Problemresponse (communicationerror

sends a response message to the PC, or incorrect command)

Do not send multiple commands at the same time.

Wait until the PC receives the OK response before sending the

next command. Return code (0DH) _" Return code (0DH)

[] Command table

Commands not indicated here are _ot guaranteed to operate.

QONTROL ]TEM QOMMAND _ARAMETER QONTROL COHTEHTS

P,_,WERONr_,MM,_NDSETTING RISIPIW 0 OFF ThePr_verOncomrnandrel_tel

i i i 1i i i ON TheP_vel Oncommanda_epted

P,_,WE R SE_ING P OWR 0 pr_ver (St It shltc_ to standL_,

iTiGia xl i=i (ToJgle) Itlnput _vltche_L_'thetOggledtlsthesan/ea anlnpUtchangek÷}O

!T!V!D 0! _ Itlnput _vltch_,toWpchannelren/aln_a Itls Lastn/_noB'J)

i,_iViD *i i i Inputtelmlnalnumbel(16/ Itlnput _vltch_,tolNpIJTl INPUT6

iNiPil *i i i 0,_UTOI:VIDEO2OOMPONENT ,_llnputchangelsal_lncludel

iNiPi 3 *i i i 0'_UTOI:VIDEO2OOMPONENT

,_dMODESELEOTION ,_IVIMID *i i i 0tT_gle, I:$TANDARD2:MG,dE3:G&ME4:LEER ,_Jtlloughltcanchor_n_vltlstoggleopelatlonlnh/slde

= = = I = = = 5 DYNAMIC[RXed 6: DYNAMIC 7 PC

= = = I = = =

VOLUME V iO i LiM * i * i i Volume(o60)

POSITION m POSfTION m Ip iO IS * i* i* i Thescre_lpr_ltlonvarlablerangesdeC_r_JontheVa_vModeortlle

VPOSfTION I V I PIO I $1' I * I* I _lgnal t_l_e The ranges can b....... the pr_ltlon s_tllng .....

p! H !S ! E * ! * ! * ! One/R3 mode (_40)

VIE_VMODE WiliDiE *i i i 0CToggle)[AV] l:SldeBart,_d]2:SStretch[,_d] OAIthoL_Jhltcancl_n_vltlstr.ggleopel_tlonlnlnslde

= = = I = = = 3 Zoom [,_d] 4: Stretd_ [,_d] 5: Normal [PC] 1: Only available when 43 Ignal Is being InpUt

= = = _ = = =

= ==i= = = r,: Zoom [R_] 7: Stretd_ [R_] 5 6: Only a_,allable when 43 _lgr_l Is b_qng InpUt

i i i ! i i i 8 Dot b_<Dot {PC] [,_d] 9: Full S_n [,_d] 8/PO] ,_/allable except wh_ LXG,_ Is beng InpUt

= = = _ = = =

i i i i i i i I&V] One/available when 1080[,p Is being InpUt

= ==i= = = 9Onlyavallablewhen720pl_lnglnput

i i i ! i i i

MIUITIE *i i i oCToggle) l:On2Off

MUTE

SURROUND ,_ iO IS i lJ * i i i 0 CToggle) 1:On 3 Off

= = = _ = = =

SLFEp TIMER OIFITIM *i i i 0:OFFI:OFFTIMER "JOMIN 2:OFF_MER O_MIN

I I I .... 3:OFF_MER 9_JMIN 4OFF_MER 120MIN

O_,_E_ _,_OT OiOiOi_''i'bi The chanr_l nLIrnbel of _/ ,_,Input¢h_geIsInCluded_ItIsnot_/dlsplal<

HANNEL i i i I i i i il 135) In,_Jr£_Og-hl_eff_llve

= ==i= = = inOable 1 135d_lseff_t_/e

_NALOG} i i i Ii i i

/IPEOT Di,_i2ip *i*i*i* (01009999_ DIGIT,_L,_lr_voPartnumL_rs 2dl_ltplus2dl_lb

H'_NNEL DIOI21U *i*i*i (19901 alGITALOable(TwoPa_num_rs3dlgltplu 3digit)

31GIT'_[J i i i I i i i FronthalfofDIGfTDLC,_BLFCH_NNELNO (ae_lgnatemalorchannel)

= = = = = = =

oioi_i_,*i*i*i ....._ .............._...............................

i iiJi i i R_I haft of DIGIT,_LO,_BLEOH,_NNELNO Deslgnatemlnol d_anneb

DjOjl J0 :i:i:i: ................................................................

DiOil il .... (0 C_S _1 DIGIT_ LCable (On.Par tnumk_r_ 5 digit more than 10 0o0)

3HUP °IHIUIP ×i i i ThechanlellLimberof_+l Ifltl notWdlsplayltwllllnput _vltdlto_'_amefLin_lona_OHA)

3H_,WN °IHIDIW ×i i i ThechanlellLimberof_ _1 Ifltl notWdlsplayltwllllnput _vltC&to_'_amefLin_lona_OHV}

OC OiLiOiP ×i i i ffc_Jgle) Toggleopelatlonofaclo_lcaptlon

• If an underbar [ _ appears in the parameter column, enter a space

• If an asterisk (*) appears, enter a value in the range indicated in brackets ur_der CONTROL CONTENTS

Any numerical value can replace the '<x '> on the table

Appendix

item Model: LC-46SBS4U

46" screen size class Ac_anced Super View & BLACK TFT LCD

LCD panel (Diagonal Measurement : 45 6s/64")

Resolution 2,073,600 pixels (1,920 >( 1,080)

TV standard (CCIR) American TV Standard ATSC/NTSC System

VHF/UHF VHF2 13ch, UHE 14 69ch

CATV 1 136ch (non scrambled channel only)

Receiving DigitalTerrestrial

Channel Broadcast(SVSB)2 69ch

Digitalcable"1

(64/256OAM) 1 185ch (non scrambled channel only)

Audio multiplex BTSC System

Backlight 60,000 hours (in default 'STANDARD" mode)

Audio out 15W X 2

iNPUT 1 AV in, COMPONENT in

iNPUT 2 AV in, S VIDEO in

iNPUT 4 HDMI in with HDCP

iNPUT 5 Audio in, HDMI in with HDCP

Rear iNPUT 6 15 pin mini D sub female connector, Audio in (@ 36 mrs jack)

Terminals ANT/CABLE 75 _--_Unbalance, F Type × 1 for Analog 6/HE/UHF/CATV) and Digital (AIR/CABLE)

DIGITALAUDI0OUTPUT Optical Digital audio output × 1 (PCM/Dolby Digital)

OUTPUT Audio out

INPUT 3 AV in, COMPONENT in

Side SERVICE Software update

OSD language English/French/Spanish

Power Requirement AC 120 V, 60 Hz (FOR NORTH AMERICA)

AC 110 240 V, 50/60 Hz (FOR OTHERS)

Power Consumption 256 W (06 W Standby with AC 120 V)

TV + stand 61 7 Ibs./28 0 kg

Weight TV only 507 Ibs./28 0 kg

Dimension*2 TV + stand 43 23/64X 29 59/64 X 12 ls/loinch

ON x H x D) TV only 43 2s/64x 27 SlA4 x 3 7/8inch

Operating temperature 32°F to 104°F (O°C to i 40°C)

Emergency alert messages via Cable ale unleceivable.

The dimensional drawings ale shown on the Spanish operation manual

As part of policy of continuous implovement, SHARP reserves the right to make design and specification changes for product

imp/ovement without prior notice The pedormance specification figures indicated are nominal values of p/oduction units

There may be some deviations from these values in indDidual units

The listed optional accessory is available for the Liquid

Crystal Televbion. Please purchase it at your nearest shop.

Additional optional accessories may be available in the near

future. When purchasing, please read the newest catalogue for

compatibility and check the availability

it is necessary to set the PC correctly to display XGA and WXGA signal. Reter to page 20 to set PC input signaFs.

PC Resolution Horizontal Frequency

720 x 400 31 5 kRz

31 5 kRz

VGA 640 x 480 379 kHz

375 kHz

351 kHz

379 kHz

SVGA 800 x 600 481 kHz

PC 469 kHz

484 kHz

XGA 1024 x 768 565 kHz

600 kHz

WXGA 1360 x 768 477 kHz

SXGA 1280x 1024 64 0 kHz

SXGA+ 1400 x 1050 640 kHz

UXGA 1600x 1200 75 0 kHz

*These 4 formats are not supported by the analog RGB terminal

Vertical Frequency

7O Hz

6O Hz

72 Hz

75 Hz

56 Hz

6O Hz

72 Hz

75 Hz

6O Hz

70 Hz

75 Hz

6O Hz

VESA Standard

DDC is a registered trademark of Video Electronics Standards Association

Power Management is a registered trademark of Sun Microsystems, Enc

VGA and XGA are registered trademarks of Intematiorlal Business Machines Corp,

[] Software composition

The software included in this product is comprised ot various software components whose individual copyrights

are held by SHARP or by third parties.

[] Software developed by SHARP and open source software

The copyrights for the software components and vadous relevant documents included with this product that were

developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties,

and other relevant laws. This product also makes use of freely distributed software and software components

whose copyrights are held by third parties. These include sottware components covered by a GNU General Public

License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.

[] Obtaining source code

Some of the open source sottware licensors require the distributor to provide the source code with the executable

soflware components. GPL and LGPL include similar requirements. For intormation on obtaining the source code

for the open source software and tot obtaining the GPL, LGPL, and other license agreement intormation, visit the

foflowing website:

htt p://www.sharpusa.com/gpl

We are unable to answer any questions about the source code tot the open source software. The source code for

the software components whose copyrights are held by SHARP is not distributed.

[] Acknowledgements

The following opel/source software compone//ts are included in this product:

• flnux kernel/busybox/uClibc/zlib/fibpng/libjpeg

CLEARING THE SECRET NUMBER

If you torget the secret number, clear the secret number using the fallowing procedure.

1 Press MENU to display the MENU screen, and then press _/1_ to select "Setup".

2 Press _k/T to select "EZ Setup", "CH Setup", "Parental CTRL", "Reset", "Color System" or "Software

Update", and the Secret number input screen displays.

3 Press and hold both CH/\ and VOL + on the TV simultaneously until the message appears on the screen.

The secret number is r====r===r_

.= = = =

*As a precautionary measure, make a note of your seclet number above, cut it from this manual, and keep it in a safe place

Calling for Service

For 10cati0n of the nearest Sharp Authorized Service, or to obtai_ product literature, accessories, supplies, or

customer assistance, please call 1 800 BE SHARP.

LiMiTED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first aonsumer purchaser that this Sharp brand Liquid Crystal Display p_oduct (the

"P_oduct"), when shipped in its original co_alner, will be free from def_tlve workmanship and materials, and agr_ that it will, at ffs option,

either repair the defect or replace the def_tlve P_oduct or part the_ed with a new or remanufactu_d equlvaFent at no cha_e to the

purchaser for parts or Fabor for the pe_od(s) set forth bebw.

Thi_ warranty does n_ apply to any appearance item_ _ the P_oduct or if the sedal number or model number affixed to the P_oduct has

been removed, defaced, changed, a_te_d or tampered with. This warranty doe_ not cover in_al_atlon or slgnaF reception p_ble_ns. This

limited warranty wiFFn_ app_ if the Product has b_n or is being used in a comme_clal setting or application; this warranty is meant soFe_./

_r the non commercial household use of the P_oduct by consumers in their home or residence. If you intend to or Mready use this P_oduct

_r comme_clal purposes or in a commerciM _ettlng, there are warra_ies avaiFable to cover your use of this P_oduct, the terms _ which may

vary. Please co.act 1-888-GO-SHARP for further i_ormatlon.

In order to enforce your rights under this limited wa_anty, you should follow the _eps _ forth below. You must be able to p_ovlde p_oof of

purchase to the _e_icer, which pro_ mu_ include the date of purchase.

To the extent permitted by applicable _tate law, the wa_a_ie_ _ _rth are in lleu _, and exduslve _, all other warra_ies, e×p_es_ or

irr,p_ied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOV EARE EXCLUDED, ALL EXPRESS AND

IMPUED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR

PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE

DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPUED WARRANTIES IS LIMITED TO THE PERIOD_) FROM THE DATE OF

PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LE(_AL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS i

WHICH VARY FROM STATE TO STATE. i

The warranties gben herein shM_ be the sole and exclusive wa_antles granted by Sharp and shal_ be the so_e and exduslve remedy i

available to the purchaser and only for the time perlod_ set forth he_eln. No other representations or p_on_ise_ made by anyone a_e i

penT, itted. Correction of defects, in the manner and for the period of time de_rlbed he_eln, shah con_itute corr,p_e fulfillment of all

liabilities and respon_ibilltles of Sharp to the purchaser with resp_t to the Product, and shal_ constitute fu_ _ati_factlon of al_ claln_, i

whether based on contract, negligence, _trlct Iia billty or otherwise. Sharp does not warrant nor _hall Sharp be _iable, or in any way i

responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, i

Jack of reasonable care, alteration, modification, tampering, mlsu_e, improper operation or maintenance or any damages or defects in the i

Product which were caused by repairs or attempted repalr_ perfonT,ed by anyone other than a Sharp authorized se_icer. Nor shall Sharp !

be _iab_e or in any way _esponslb_e for any incldenta_ or con_equentla_ economic or property damage. Some _ate_ do n_ allow limits on

warrantle_ or on _emedles for b_each in certain transactions; in _uch _ates, the _imlts herein may n_ appbz.

THiS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES_ THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Specific Section

Your Product Model Number &Description: LC 46SB54U LCD Color T_levlslo n

(Be sure to have thls _nformat_on available when you need service for your

Product.)

Warrant,/Period for this Product:

Additional Exclusions from

Warranty Coverage (if any}:

One (1) year parts, 90 days labor from the date of purchase.

In order for the Product to be se_vlced, the Product must be readily available

to the se_icer, free and c_ear of any complex or non standard installation,

mounting or other encumbrance which would unreasonably interfere with

se_vlclng the Product. The Se_icer wi_ remount the Product after se_vlce,

provided that such remounting is not into a complex or non standard in_talla_

tlon. Any addltlona_ _abor and materials required to remove and/or relnstal_ a

Product above and beyond the foregoing are not covered by thi_ warranty,

may result in addltlonM charges and are the respon_ibillty of the consumer.

Image Retention resu_tlng from a fixed image being displayed for long

periods of time is not covered by this Limlted Warranty (see Operation

Manual on how to prevent this).

Where to Obtain Service:

What to do to Obtain Service:

From a Sharp Authorized Se_ioer _ocated in the United States. To find the

location of the n_rest Sharp Authorized Servicer, please call Sharp toll fr_

at 1 800 BE-SHARR

Contact your Sharp Authorized Se_Jcer to obtain in home setvlce for this

product. The Se_vlcer will come to your location and if n_essary remove the

unit for repair at the Se_icer's facility and return the set to you once

completed. Be sure to have Proof of Purchase available.

TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800- BE-SHARP

OR VISIT www.shar pusa.com

SHARP

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

LIMITED WARRANTY

Consumer E/eotronics Products

Congratulations on your purchaser

Sharp Elect ro_ics of Call_da Ltd. (hereinafter called "Sharp") gives the following express warranty to the first consumel purchaser Iol _his

Sharp braltd product, when shipped ir_ its oPginal container and sold or distdbuted in Canada by Sharp or by air Authorized Sharp Dealer:

Sharp warrants that this product is flee, under t_ormal use and maintenance, from at_y defects n matodal and workmanship. If a_y such

defects _hould be found in this product withln the applicable warranty period, Sharp shall, at its option, repair or replace the product as

specified here_n.

This warranty shall not apply to:

(a) Any defects caused or repaFrs required as a result of abusive operation, negligence, accident, improper instamation or inappropr ate

use as outlined in the owner's m_n_al,

(b) Any Sharp product tampered with, modified, adiusted or repaired by any party other than Sharp, Sharp's Authorized Service Centres

or Sharp's Authorized SerVicing Dealers.

(c) Damage caused or repairs required as a result of the use with items not speafied or approved by Sharp, including but not I_mged to

head clean_ng tapes and chemical cleaning agents.

(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the p_oduct including but

not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, t_ays, filters, belts, ribbons, cables and

paper.

(e) Any cosmetic damage to the surface o_ e×Lerior lhat has been defaced or caused by normal wear and tea_,

(6 Any damage caused by external or environmental cor_d_ior_s, including but not limited to transmission I_ne/power line voltage o_ I_qu_d

spillage.

(g) Any product received without appropriate model, serial number and CSA/cUL markings.

(h) Any products used for rental or commercial purposes,

(1) Any ir_stallation, setup and/or programmir_g charges.

Should this Sharp product fail to operate during the warranty pedod, warraniy service may be obtained upon delivery of the Sharp product

togeiher with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp SeH_ce Centre or an

A_thorized Sharp Sewlcing Dealer. In home warranty service may be provided at Sharp's discretion on any Sharp televlsior_ with lhe

screen size of 27" or larger afzd on any Sharp Over-the-Range Microwave Ovet_.

Th_s warranty co_st_tutes the entire express warranty granted by Sharp and no other dealer, se_ice centre or their agent or employee is

aulhorized to extend, enlarge or transfer this warranty on behalf of Sharp, To 1he extent 1he law permlts, Share dlsclaims any and aft

lability lor direct or indirect damages or losses or lot any incidenlal, special or consequential damages or loss of profits resulting from a

defect in material or workmanship relating to the product, if,cluding damages for 1he loss of time or use of this Sharp product or the loss

of information. The purchaser w_Hbe responsible for any removal, re]nstaflat_on, transportation and insurance costs ]_ourred. Correction of

defects, n the manner a_d per_od el lime described herei_, constitute complete fulfillment of all obllga_ions and responslbilit es of Sharp

to the purchaser with respect to the product and shall constitute full satisiactlon of all claims, whether based on contract, negligence, stdct

lability or otherwise.

WARRANTY PERIODS: Parts & Laboul (exceptions noted)

Audio P_oduct I yea_

Camcorder I yea_

DVD Product I yea_

Piojector I yeal (lamp go days)

LCD TV I yeal

Miclowave Ove_ I yeal (magnetron component-4 additional years)

A_r Purlf_er I year

Portable Air Conditioner I yeal

For more information on this Warranty, Sharp Extended Warranty

Offers, Sharp Canada Products, Accessory Sales Dealer or Service _HAI'€I=,

Locations, please call (905) 568-7140 _

Visit our Web site _ www sharp ca _ _ -_'

" " _ s_.wcs

Revision 12/16/05

Sharp LC 46SB54U User Manual LCD TELEVISION Manuals And Guides L0805212

SHARP LCD Television Manual L0805212 SHARP LCD Television Owner's Manual, SHARP LCD Television installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation