Sharp Flat Panel Television Lc 32Sh130K Users Manual Operation GB
2015-01-23
: Sharp Sharp-Sharp-Flat-Panel-Television-Lc-32Sh130K-Users-Manual-284695 sharp-sharp-flat-panel-television-lc-32sh130k-users-manual-284695 sharp pdf
Open the PDF directly: View PDF 
.
Page Count: 32
| Download | |
| Open PDF In Browser | View PDF |
ENGLISH LC-32SH130K LCD COLOUR TELEVISION SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg SHARP CORPORATION 50201858 http://www.sharp-eu.com OPERATION MANUAL Contents Features............................................................................................. 2 Dear SHARP customer....................................................................... 2 Introduction......................................................................................... 2 Preparation......................................................................................... 2 Important safety precautions.............................................................. 3 Safety Precautions............................................................................. 4 Connection to a Television Distribution System (Cable TV etc.) from Tuner..................................................................................... 4 Package Contents.............................................................................. 5 Environmental Information ................................................................ 5 Repair Information.......................................................................... 5 Remote Control Buttons..................................................................... 6 LCD TV and Operating Buttons.......................................................... 7 Viewing the Connections - Back Connectors..................................... 7 Viewing the Connections - Side Connectors...................................... 8 Power Connection.............................................................................. 8 Aerial Connection........................................................................... 8 Using USB Inputs............................................................................... 8 Connecting to a DVD Player via HDMI............................................... 9 Connecting to a DVD Player via Component Sockets (YPbPr) or Scart Cable......................................................................................... 9 Connecting the LCD TV to a PC......................................................... 9 Using Side AV Connectors............................................................... 10 Remote Control Handset.................................................................. 10 Inserting Batteries......................................................................... 10 Switching On/Off............................................................................... 10 To Switch the TV On..................................................................... 10 To Switch the TV to Standby......................................................... 10 To Switch the TV Off..................................................................... 10 Input Selection.................................................................................. 10 Basic Operations.............................................................................. 10 Operation with the Buttons on the TV........................................... 10 Volume Setting.......................................................................... 10 Programme Selection............................................................... 10 Viewing Main Menu................................................................... 10 AV Mode................................................................................... 10 Operation with the Remote Control.............................................. 10 Volume Setting.......................................................................... 10 Programme Selection (Previous or Next Programme) 10 Programme Selection (Direct Access)...................................... 10 Viewing Electronic Programme Guide (EPG)................................... 11 Recording via EPG Screen........................................................... 11 Programme Options..................................................................... 11 First Time Installation....................................................................... 12 Installation........................................................................................ 13 Automatic Channel Scan (Retune) Menu Operation 13 Manual Tuning ................................................................................. 13 Digital Manual Search.................................................................. 13 Analogue Manual Search............................................................. 13 Analogue Fine Tune..................................................................... 13 Clear Service List (*)..................................................................... 13 Managing Stations: Channel List...................................................... 13 Operating the Channel List........................................................... 14 Moving a Channel......................................................................... 14 Deleting a Channel....................................................................... 14 Renaming a Channel.................................................................... 14 Locking a Channel........................................................................ 14 Managing Stations: Favourites......................................................... 14 Button Functions........................................................................... 14 Managing Stations: Sorting Channel List......................................... 14 On-Screen Information..................................................................... 14 Media Playback Using Media Browser............................................. 15 Viewing Videos via USB .............................................................. 15 Viewing Photos via USB............................................................... 15 Slideshow Options........................................................................ 15 Playing Music via USB ................................................................ 15 Recordings Library....................................................................... 16 Media Browser Settings................................................................ 16 Timeshift Recording . ....................................................................... 16 Instant Recording............................................................................. 16 Watching Recorded Programmes ................................................... 17 Changing Image Size: Picture Formats............................................ 17 Configuring Picture Settings............................................................. 18 Operating Picture Settings Menu Items........................................ 18 Picture Settings Menu Items......................................................... 18 PC Picture Settings...................................................................... 18 Configuring Sound Settings.............................................................. 19 Operating Sound Settings Menu Items......................................... 19 Sound Settings Menu Items......................................................... 19 Configuring Your TV’s Settings......................................................... 19 Operating Settings Menu Items.................................................... 19 Settings Menu Items..................................................................... 19 Using a Conditional Access Module................................................. 19 Viewing Conditional Access Menu (*)........................................... 19 Configuring Language Preferences.................................................. 20 Language Settings........................................................................ 20 Parental Control............................................................................... 20 Parental Settings Menu Operation............................................... 20 Timers............................................................................................... 21 Setting Sleep Timer...................................................................... 21 Setting Programme Timers........................................................... 21 Adding a Timer.......................................................................... 21 Editing a Timer.......................................................................... 21 Deleting a Timer........................................................................ 21 Recording Configuration................................................................... 21 Configuring Date/Time Settings........................................................ 21 Configuring Source Settings............................................................. 22 Configuring Other Settings............................................................... 22 Operation...................................................................................... 22 Other Features................................................................................. 22 Teletext............................................................................................. 23 Tips................................................................................................... 23 Appendix A: PC Input Typical Display Modes................................... 24 Appendix B: AV and HDMI Signal Compatibility (Input Signal Types)............................................................................................... 24 Appendix C: Supported DVI Resolutions......................................... 25 Appendix D: Supported File Formats for USB Mode........................ 25 Appendix E: Software Upgrade........................................................ 26 Specifications................................................................................... 27 Dimensional Drawings...................................................................... 28 End of life disposal........................................................................... 29 Detachable Stand Uninstallation Method......................................... 30 Screw Dimensions............................................................................ 31 English - 1 - • Headphone connection. • Automatic programming system. • Forward or backward manual tuning. • Sleep timer / Child lock. • Automatic sound mute when no transmission. • NTSC playback. • AVL (Automatic Volume Limiting). • Auto power down. SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. ASA Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: • The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. • The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug. Before replacing the plug cover make sure that: • If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. • The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires. I F Y O U H AV E A N Y D O U B T, C O N S U LT A Q U A L I F I E D ELECTRICIAN. Features • PLL (Frequency Search). • PC input. • Plug&Play for Windows 98, ME, 2000, XP, Vista, Windows 7. • Game Mode • The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations. • The examples used throughout this manual are based on the LC32SH130K model. Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Introduction Please read the corresponding instructions of this handbook prior to the first usage of the device, even when the usage of electronic devices is familiar to you. Please take notice of the chapter SAFETY PRECAUTIONS. Carefully keep the handbook as future reference. When selling the device or giving it away, provide these direction for use. Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please do keep this manual in a safe place for future references. This device is intended to receive and display TV programs. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder, VCR, PC etc.). This device is only suitable for the operation in dry interiors. This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device is not used as intended, or unauthorized modifications have been made. To operate your LCD TV in extreme ambient conditions may cause the damage of the device. Preparation For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this device in moderate climates. • Remote controlled colour LCD TV. • USB input. • Programme recording • Programme timeshifting • 1000 programmes (analogue+digital). • OSD menu system. • Integrated tuner MPEG2 compatible. • Scart socket for external devices (such as video, video games, audio set, etc.). • Stereo sound system. (German+Nicam) • Teletext, fastext, TOP text. English - 2 - 10 cm • HDMI connectors for digital video and audio. This connection is also designed to accept high definition signals. 10 cm 10 cm • Fully integrated Terrestrial digital TV (DVB-T - MPEG2) Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV. • Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock. • Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer. • When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart. • Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed. • The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass. • Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers). • To prevent fire, never place any type of candle or naked flames on the top or near the TV set. • To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items. • Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels. • Do not display a still picture for a long time, as this could cause an afterimage to remain. • There is power consumption always if main plug is connected. • Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified person to perform servicing. The LCD panel is a very high technology product, giving you fine picture details. Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or red. This is within product specifications and does not constitute a fault. Precautions when transporting the TV When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two hands—one hand on each side of the TV. WARNING To prevent the spread of fire, keep candles or other open flames away from this product at all times. English - 3 - Safety Precautions Read the following recommended safety precautions carefully for your safety. Power Source The TV set should be operated only from a 220-240V AC, 50Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause fire or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualified personnel. Moisture and Water Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects filled with liquids, such as flower vases, on top. Avoid from dripping or splashing. • Do not try to recharge batteries, there is a danger of explosion. Replace batteries only with the same or equivalent type. This symbol on the product or on its packaging means that your electrical and electronic device should be disposed at the end of its service life separately from your household wastes. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or the dealer where you purchased the product. Disconnecting the Device The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable. Headphone Volume Excessive sound pressure from earphones and headphones can cause hearing loss. Installation To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available). LCD Screen If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualified personnel before operating it any further. Cleaning The LCD panel is a very high technology product with about a million thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect the performance of your product. Warning! Do not leave your TV in standby or operating mode when you leave your house. Connection to a Television Distribution System (Cable TV etc.) from Tuner Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth. Ventilation The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway. Heat and Flames The set should not be placed near to open flames and sources of intense heat such as an electric heater. Ensure that no open flame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, fire or the like. Device connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11). Note:The HDMI connection between PC and TV may cause radio interference in which case it is recommended to use VGA(DSUB-15) connection. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. Replacement Parts When replacement parts are required, make sure that the service technician has used replacement parts, which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock or other hazards. Servicing Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock. Waste Disposal • Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as a foil bag should be kept away from children • Batteries, including those which are heavy metal free, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area. The Standby Off/On button doesn´t separate this device completely from mains. Moreover the device consumes power in the standby operation. In order to separate the device completely from mains, the mains plug has to be pulled from the mains socket. Because of that the device should be set up in a way, that an unobstructed access to mains socket is guaranteed, so that in case of emergency the mains plug can be pulled immediately. To exclude the danger of fire, the power cord should principally be separated from the mains socket prior to a longer period of non-usage, i.e. during vacations. • “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.” • Manufactured under license from Dolby Laboratories. English - 4 - Environmental Information • The “HD TV 1080p” Logo is a trademark of EICTA. • This television is designed to consume less energy to save environment. • The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—project. Electrical device not in the hands of children Never let children use any electrical device unsupervised. Children cannot always recognise possible dangers. Batteries / accumulators can be life threatening when swallowed. Store batteries out of the reach of small children. In case of swallowing a battery medical aid has to be sought immediately. Also keep the packaging foils away from children as there is danger of suffocation. Package Contents You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: • You can use Power Save Mode setting, located in the Other Settings menu. If you set Power Save Mode as On, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode. • When the TV is not used, please switch off at the rear rocker switch to further reduce power consumption. • Disconnect the TV from the mains socket when it will not be used for prolonged periods. SLEEP SCREEN FAV LANG. • When the TV is left in stand-by it consumes a small amount of power switching off at the rear rocker switch or disconnect the TV from the mains will make further energy savings. Note activating the “Power Save Mode” saves on an annual bases more energy than switching off the mains when the TV is not used, to save most energy it is highly recommended that “Power Save Mode” is switch on. PRESETS LCD TV EPG SWAP Repair Information SOURCE Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV. Please contact your local dealer, where you have purchased this TV for further information. Batteries: 2 X AAA C DISP. SEARCH MODE INFO CH V Instruction Book Remote Control Quick Guide 1 X Component Video Connection Cable Note: You should check the accessories after purchasing. Make sure that each accessory is included. As the manufacturer’s specification supports communication on cable lengths shall be smaller than 3m. English - 5 - Remote Control Buttons 1. Standby 2. Image size / Zooms videos (in Media Browser video mode) 3. Sleep Timer 4. Mono / Stereo - Dual I-II / Currrent Language (*) (in DVB channels) 5. Favourite Mode Selection (in DVB channels) 6. Numeric buttons 7. Electronic programme guide (in DVB channels) SLEEP SCREEN FAV LANG. PRESETS 8. No function 9. Media Browser 10. Navigation buttons (Up/Down/Left/Right) 11. No function 12. Recordings Library 13. Programme Down / Page up - Programme Up / Page down 14. Mute 15. Programme recording 16. Pause (in Media Browser mode) / Timeshift recording EPG SWAP 17. Rapid reverse (in Media Browser mode) 18. Play (in Media Browser mode) SOURCE 19. Red button 20. Green button / List Schedule (in EPG) / Tag / Untag All (in favourite list) / Play-Slideshow (in Media Browser) / Loop-Shuffle (in Media Browser) 21. Picture mode selection / Changes picture mode (in Media Browser video mode) 22. No function 23. Teletext / Mix (in TXT mode) 24. Subtitle on-off (in DVB channels) C 25. Previous programme 26. AV / Source selection DISP. SEARCH MODE 27. Menu on-off 28. Okay (Confirm) / Hold (in TXT mode) / Edit Channel List INFO 29. Exit / Return / Index page (in TXT mode) CH 30. No function 31. Info / Reveal (in TXT mode) 32. Volume Up / Down 33. No function 34. No function 35. Rapid advance (in Media Browser mode) 36. Stop (in Media Browser mode) 37. Blue button / Edit Channel List / Filter (In Favourite List&EPG) 38. Yellow button / Timeline Schedule (in EPG) English - 6 - V LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu. SPDIF 1 2 Viewing the Connections - Back Connectors VGA Coax.OUT SCART 1. HDMI 2: HDMI Input 2. HDMI 1: HDMI Input HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI connection. 3. RF Input connects to an aerial antenna system. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages. 4. SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player). Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Note: S-VHS signal is supported via the scart socket. 5. PC Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. 6. SPDIF Coaxial Out outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input English - 7 - Viewing the Connections - Side Connectors 1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section. 2. USB Inputs. Note that programme recording feature is available via these USB inputs. You can connect external hard disk drives to this input. 3. V i d e o I n p u t i s u s e d f o r c o n n e c t i n g v i d e o s i g n a l s o f e x t e r n a l d e v i c e s . C o n n e c t t h e v i d e o cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device. 4. Audio Inputs are used for connecting audio signals of external devices. Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device. Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio. 5. Component Video Input (YPbPr) is used for connecting component video. You can connect the component video and audio sockets with a device that has component output. To do this, you must use the supplied component video connection cable for enabling connection. First, plug single jack of the cable to the TV’s YPbPr socket (side). Afterwards, insert your component cable’s (not supplied) connectors into the plural part of the Component video connection cable. Colours of the connected jacks should match. 6. Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones (optional). 7. , switch is used for turning the TV on or off. Power Connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet. Aerial Connection 1 2 • Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV. VGA SPDIF Coax.OUT SCART Using USB Inputs USB Connection • You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV. This feature allows you to play files stored in a USB drive or record programmes. • 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives are supported. • To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. IMPORTANT ! • You may back up your files before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any file damage or dataloss. • It is possible that certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this TV. IMPORTANT: The TV supports only FAT32 disk formatting. NTFS format is not supported. If you connect a USB disk with NTFS format, the TV will ask you to format the content. See the section, “Format Disk” in the following pages for more information on disk formatting. Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 in such a case. USB Disk Connection • Plug your USB device to the USB input of the TV. Note: Plug or unplug your USB disk while the TV is switched off. Note: If you are going to connect a USB hard disk drive to the TV set, USB connection cable used between the disk drive and the TV should have a USB logo and should be as short as possible. Note: While formatting a USB hard disk that has 1TB (Tera Byte) or more file capacity, you can experience problems with the formatting process. In such a case, you should format the disk with your personal computer and the formatted disk type should be FAT32. SIDE VIEW USB MEMORY USB 5Vdc Max:500mA CAUTION ! English - 8 - • Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device itself. • Do not pull out USB module while playing or recording a file. Programme Recording To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. IMPORTANT: When using a new USB hard disk drive, it is recommended that you first format the disk using your TV’s “Format Disk” option. • To use the recording function a USB 2.0 certified device of at least 1GB should be used, If the connected USB device is not USB 2.0 an error message will be displayed. • Recorded programmes are saved into the connected USB disk in .TS format (MPEG-2 transport stream). If desirable, you can back up / copy these saved recordings into a personal computer. Note: It is possible that recorded broadcasts in .TS format may not be supported by your media playback software. In such a case, you should install an appropriate media playback software to your computer. • When you connect to DVD player as illustrated above, switch to the connected HDMI source. See, Input Selection section for more information on changing sources. Connecting to a DVD Player via Component Sockets (YPbPr) or Scart Cable If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section. • You may also connect through the scart socket. Use a SCART cable as shown below. Note: These two methods of connection perform the same function but in different levels of quality. It is not necessary to connect by all three methods. • An hour of the recordings stored occupies approximately 2 GB of space. SCART HDMI • For more information on recording programmes, see sections “Instant Recording”, “Timeshifting”, “Electronic Programme Guide”, “Recordings Library” or “Recording Timers” in the following parts. • Recorded programmes are split into 1GB partitions. Names of the stored recordings’ last three digits indicates this: Such as 4801-000. ts , 4801-001.ts. HDMI Cable (not supplied) Scart Cable (not supplied) • Recorded programmes are stored in the following directory of the connected USB disk: \DVR\RECS. All recordings are indicated with a number (such as 4801-000.ts). A text (txt) file is created for each recording. This text file includes information such as broadcaster, programme, and recording time. Scart sockets HDMI inputs • If the writing speed of the connected USB disk is not sufficient, recording may fail and timeshifting feaute may not be available. • Recordings of HD programmes can occupy bigger size on the USB disk depending on the broadcast’s resolution. For this reason it is recommended to use USB hard disk drives for recording HD programmes. • Do not plug out the USB/HDD during the recording. This may harm the connected USB/HDD. • Only two partitions on a HDD unit can be supported. • Some stream packets may not be recorded because of signal problems, so sometimes video may freezes during playback. • Record, Play, Pause, Display (for PlayListDialog) keys could not be used when teletext is ON. If a recording starts from timer when teletext is ON, teletext is automatically turned off. Also teletext usage is disabled when there is ongoing recording or playback. If the recording time of an event is longer than the memory capacity, the following message will appear on the screen: “There is not enough space for ‘event’ but it will be recorded until the drive is full”. DVD Player • Some DVD players are connected through COMPONENT SOCKETS (YPbPr). In this case, you must use the supplied Component video connection cable for enabling connection. First, plug single jack of the cable to the TV’s YPbPr socket (side). Afterwards, insert your component cable’s (not supplied) connectors into the plural part of the Component video connection cable (see illustration below). Colours of the connected jacks should match. • To enable audio connection, use the VGA/Component Audio cable. First, plug single jack of the cable to the TV. Afterwards, insert your DVD player’s audio cable’s connectors into the plural part of the VGA/ Component audio connection cable (see illustration below). Colours of the connected jacks should match. Side view Connecting to a DVD Player via HDMI Note: Not all cables shown in the illustration are supplied. SPDIF VGA HDMI Cable (not supplied) Coax.OUT SCART DVD Player YPbPr Video Cable (Not supplied) • When the connection is made, switch to YPbPr source. See, Input Connection Cable (Supplied) selection section.Note: To connect YPb Pr device, you should use supplied component (YPbPr) connectionAudio cable. Cable 1 2 • If your DVD player has an HDMI socket, you can connect via HDMI for better video and audio quality. YPbPr Connection Cable (supplied) External device English - 9 - Side Video/Audio SIDE AV Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Side AV Input (Not supplied) Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. Power off both computer and display before making any connections. Use 15-pin D-sub display cable to connect a PC to the LCD TV. When the connection is made, switch to PC source. See “Input selection” section. Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts. PC VGA Cable (Not supplied) By either method the TV will switch on. To Switch the TV to Standby To s w i t c h t h e T V t o l o w p o w e r s t a n d b y p r e s s t h e “ ” button on the remote control or right hand side of the TV. Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. To Switch the TV Off PC Input (back) • Switch the “ Or ” button on the bottom right hand side under the screen to position 2 as illustrated, mains, the LED will go out. PC Audio Cable (Not supplied) . Note: If you switch on your TV via CH / CH buttons on the remote control or on the TV set, the programme that you were watching last will be reselected. to isolate the TV from the • If the TV will not be used for a long period i.e. holidays, then unplug the power cord from the mains socket. Side AV Input Using Side AV Connectors You can connect a range of optional equipment to your LCD TV. • For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts. Input Selection Once you have connected external systems to your TV, you can switch to different input sources. Press “SOURCE” button on your remote control consecutively for directly changing sources. • To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV. AVCable (notsupplied) Camera Headphone Remote Control Handset Basic Operations Inserting Batteries • Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part. You can operate your TV using both the remote control and onset buttons. • Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover. Operation with the Buttons on the TV Volume Setting • Press “ ” button to decrease volume or “ ” button to increase volume, so a volume level scale (slider) will be displayed on the screen. Programme Selection • Press “P/CH +” button to select the next programme or “P/CH -” button to select the previous programme. Note: Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Remote range is approximately 7m/23ft. Switching On/Off • Press “ ”/“ ” buttons at the same time to view main menu. In the Main menu select sub-menu using “P/CH -” or “P/CH +” buttons and enter the sub-menu using “ ” or “ ” buttons. To learn the usage of the menus, refer to the menu system sections. AV Mode To Switch the TV On Connect the power cord to the 220-240V AC 50 Hz. • Switch the “ ” button on the bottom right hand side under the screen to position “|” so the TV will switch to standby mode. Then the standby LED lights up. • To switch on the TV from standby mode either: • Press the “ control. ” button, CH / CH or a numeric button on the remote • Press the “ ” or +/- button on the TV. • The TV will then switch on. Viewing Main Menu • Press the “TV/AV” button in the control panel on the TV to switch between AV modes. Operation with the Remote Control • The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV. Volume Setting • Press “V+” button to increase the volume. Press “V-” button to decrease the volume. A volume level scale (slider) will be displayed on the screen. English - 10 - Programme Selection (Previous or Next Programme) • Press “CH ” button to select the previous programme. • Press “CH ” button to select the next programme. Programme Selection (Direct Access) • Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between, press the numeric buttons consecutively. When the pressing time is due for the second numeric button, only the first digit programme will be displayed. Press directly the programme number to reselect single digit programmes. Viewing Electronic Programme Guide (EPG) You can view the electronic programme guide (EPG) to view information about available programmes.To view the EPG menu please press EPG button on the remote control. • Press “ ”/“ ” buttons to navigate through channels. Red button (Prev Day): Displays the programmes of previous day. Green button (Next day): Displays the programmes of the next day. Yellow button (Zoom): Expands programme information. Blue button (Filter): Views filtering options. INFO (Details): Displays the programmes in detail. Numeric buttons (Jump): Jumps to the preferred channel directly via numeric buttons. • Press “ ”/“ ” buttons to navigate through the programme list. • EPG menu displays available information on all channels. • Please note that event information is updated automatically. If there are no event information data available for channels, EPG will be displayed with blanks. OK (Options): views/records or sets timer for future programs. Text (Search): Displays “Guide Search” menu. SUBTTL: Press SUBTITLE button to view Select Genre menu. Using this feature, you can search the programme guide database in accordance with the genre. Info available in the programme guide will be searched and results matching your criteria will be listed. SWAP (Now) : Shows the current programme. Recording via EPG Screen IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. (RECORD): the TV will start to record the selected progamme. You can press again to stop the recording. Note: Switching to a different broadcast or source is not available during the recording. Up/Down/Left/Right: Navigate. OK (Options): views/records or sets timer for future programs. / INFO (Event Details): Displays the programmes in detail. : Page left / Page right. Programme Options Green button: Programme schedule will be listed Yellow button: Display EPG data in accordane with timeline schedule Blue button (Filter): Views filtering options. In EPG menu, press the OK button to enter the “Event Options” menu. (RECORD): the TV will start to record the selected progamme. You can press again to stop the recording. Select Channel In EPG menu, using this option, you can switch to the selected channel. Record / Delete Record Timer Up/Down/Left/Right: Navigate. Red button (Prev Time Slice): Displays the programmes of previous time slice. Green button (Next Time Slice): Displays the programmes of the next time slice. Yellow button (Prev Day): Displays the programmes of previous day. Blue button (Next day): Displays the programmes of the next day. Numeric buttons (Jump): Jumps to the preferred channel directly via numeric buttons. OK (Options): views/records or sets timer for future programs. IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. • After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed. Select “Record” option and press the OK button. After this operation, a recording becomes set to the selected programme. • To cancel an already set recording, highlight that programme and press the OK button and select the option “Delete Rec. Timer”. The recording will be cancelled. Note: You cannot switch to any other channel or source while there is an active recording on the current channel. Set Timer / Delete Timer Text button (Filter): Views filtering options. INFO (Details): Displays the programmes in detail. (RECORD): the TV will start to record the selected progamme. You can press again to stop the recording. After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed. Select “Set Timer on Event” option and press OK button. You can set a timer for future programmes. English - 11 - To cancel an already set reminder, highlight that programme and press the OK button. Then select “Delete Timer” option. The timer will be cancelled. Note: It is not possible to record or set timer for two or more individual events at the same time interval. First Time Installation IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation. • When the TV is operated for the first time, installation wizard will guide you through the process. First, language selection screen will be displayed: Note: You can press “MENU” button to cancel. IMPORTANT! If you are located at a TV regional border or are able to receive broadcasts from more than one transmitter the “Choose Region” OSD will be displayed after the digital channels have been scanned. To prevent poor quality pictures or unwanted regional variation from being stored in your main channel list you MUST! select your preferred regional options for each level where available, move the cursor to each option and press the Left/right arrow keys to view the available regions/transmitters. • Use “ ” or “ ” buttons to select your language and press OK button to set selected language and continue. • After selecting the language, “Welcome!” screen will be displayed, requiring you to set Country,Teletext Language and Scan Encrypted options. • By pressing “ ” or “ ” button, select the country you want to set and press “ ” button to highlight Teletext Language option. Use “ ” or “ ” button to select desired Teletext Language. The example below shows “UK” “England” “North West” have been selected as the regional options, after OK is pressed they can only be changed if “First time installation” is repeated. Received regional variations from the non selected region/transmitters will be stored from preset 800. After all the available stations have been stored a channel list will be shown based on the broadcaster LCN press OK to accept this channel order and start viewing or use the Edit functions to change the order or delete unwanted channels. • Press “ ” button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations.Afterwards select the desired Teletext Language. • Press OK button on the remote control to continue and the following message will be displayed on the screen: • Press OK button to quit channel list and watch TV. To select the “Yes” or “No” option, highlight the item by using “ ” or “ ” buttons and press OK button. Afterwards, the following OSD will be displayed on the screen and the digital television will search for digital terrestrial TV broadcasts. English - 12 - Analogue Manual Search Installation Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button. Press OK button and the following menu screen will be displayed. After selecting search type as analogue, you can use “ ”/“ ” button to highlight an item and then press “ ” or “ ” button to set an option. Select Automatic Channel Scan (Retune) by using “ ”/“ ” button and press OK button. Automatic Channel Scan (Retune) options will be displayed. You can select Digital Aerial, Analogue or Digital AerialAnalogue tuning using “ ”/“ ” and OK buttons. Enter the channel number or frequency using the numeric buttons. You can then press OK button to search. When the channel is located, any new channels that are not on the list will be stored. Automatic Channel Scan (Retune) Menu Operation • Select Analogue Fine Tune from the Installation menu by using “ ” or “ ” and OK buttons. Analogue fine tune screen will be displayed. Analogue Fine Tune feature will not be available if there are no analogue channels, digital channels and external sources stored. Digital: Searches and stores aerial DVB stations. Analogue: Searches and stores analogue stations. Full: Searches and stores both analogue and aerial DVB stations. • Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using .“ ” or “ ” and OK button. • After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. Press “MENU” button to cancel process. In such a case, located channels are not stored. Analogue Fine Tune • Press OK button to proceed. Use “ ” or “ ” button to set Fine Tune. When finished, press OK button again. Clear Service List (*) (*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland. Use this setting to clear channels stored. Press “ ” or “ ” button to select Clear Service List and then press OK. The following OSD message will be displayed on the screen: Manual Tuning HINT: This feature can be used for direct broadcast entry. • Select Manual Channel Scan from the Installation menu by using “ ”/“ ” and OK buttons. Manual Scan options screen will be displayed. • Select the desired Search Type using “ ” or “ ” button. Manual search options will change accordingly. Use “ ”/“ ” button to highlight an item and then press “ ” or “ ” button to set an option. You can press “MENU” button to cancel. Digital Manual Search Press OK to cancel. Select Yes by pressing “ ” or “ ” button and press OK to delete all of the channels. Managing Stations: Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. • Press “MENU” button to view main menu. Select Channel List item by using “ ” or “ ” button. Press OK to view menu contents. In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital Aerial, you can enter the multiplex or frequency number using the numeric buttons and press OK button to search. Select Edit Channel List to manage all stored channels. Use “ ” or “ ” and OK buttons to select Edit Channel List. English - 13 - Operating the Channel List • Press “ ” or “ ” button to select the channel that will be processed. Press “ ” or “ ” button to select a function on Channel List menu. • Select a channel by using “ ” or “ ” button. Press OK button to add selected channel to favourites list. Press OK button again to remove. • Use CH /CH buttons to move page up or down. Button Functions • Press BLUE button to view filtering options. • OK: Add/remove a station. • Press “MENU” button to exit. • YELLOW: Tag/untag a channel. Moving a Channel • GREEN: Tag/untag all channels. • First select the desired channel. Select Move option in the channel list and press OK button. • Edit Number screen will be displayed. Enter the desired channel number by using the numeric buttons on the remote control. If there is a previously stored channel on that number, a warning screen will be displayed. Select Yes if you want to move the channel and press OK. • Press OK button to process. Selected channel is now moved. • BLUE: Displays filtering options. Managing Stations: Sorting Channel List You can select broadcasts to be listed in the channel list. To display specific types of broadcast, you should use Active channel list setting. Select Active channel list from the Channel list menu by using “ ” or “ ” button. Press OK button to continue. Deleting a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel. • Select the channel that you want to delete and select Delete option. Press OK button to continue. • A warning screen will appear. Select YES to delete, select No to cancel. Press OK button to continue. Renaming a Channel • Select the channel that you want to rename and select Edit Name option. Press OK button to continue. • Pressing “ ” or “ ” button moves to the previous/next character. Pressing “ ” or “ ” button toggles the current character, i.e., ‘b’ character becomes ‘a’ by “ ” and ‘c’ by “ ”. Pressing the numeric buttons ‘0...9’ replaces the highlighted character with the characters printed above the button one by one as the button is pressed. • When finished, press OK button to save. Press “MENU” to cancel. Locking a Channel You can select a broadcast type option from the list by using “ ” /“ ” and OK buttons. On-Screen Information You can press “INFO” button to display on-screen information. Details of the station and current programme will be displayed on the information banner. You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel. • Select the channel that you want to lock and select Lock option. Press OK button to continue. • You will be asked to enter parental control PIN. Default PIN is set as 0000. Enter the PIN number. The information banner gives information on the channel selected and the programmes on it. The name of the channel is displayed, along with its channel list number. Hint: Not all channels broadcast the programme data. If the name and time of the programme are not available, then information banner will be displayed with blanks. If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000). “Enter PIN” will be displayed on the screen in such a case: • Press OK button when the desired channel is highlighted to lock/ unlock the channel. Lock symbol will be displayed next to the selected channel. Managing Stations: Favourites You can create a list of favourite programmes. • Press “MENU” button to view main menu. Select Channel List item by using “ ” or “ ” button. Press OK to view menu contents. • Select Favourites to manage favourite list. Use “ ”/“ ” and OK buttons to select Favourites. • You can set various channels as favourites so that only the favourite channels are navigated. English - 14 - Media Playback Using Media Browser If the USB stick is not recognized after power off/on or First Time Installation, first, plug the USB device out and power off/on the TV set. Plug the USB device in again. To display Media Browser window, press either “MENU” button on the remote control and then select Media Browser by pressing “ ” or “ ” button. Press OK button to continue. Media Browser menu options will be displayed. Yellow: Opens subtitle time correction menu Also, when you plug USB devices, media browser screen will be displayed automatically: Press SWAP button to switch back to previous menu. Viewing Photos via USB When you select Photos from the main options, available image files will be filtered and listed on this screen. You can play music, picture and video files from the connected USB memory stick. Use “ ” or “ ” button to select Videos, Photos, Music, Recording Library or Settings. Viewing Videos via USB Jump (Numeric buttons): Jump to selected file using the numeric buttons. OK: Views the selected picture in full screen. Up/Down: Navigate. Slideshow ( button): Starts the slideshow using all images. GREEN button: Views images in thumbnails. RED button: Sorts files by date. When you select Videos from the main options, available video files will be filtered and listed on this screen. You can use “ ” or “ ” button to select a video file and press OK button to play a video. If you select a subtitle file and press OK button, you can select or deselect that subtitle file. The following menu will be displayed while playing a video file: YELLOW button: Toggles viewing style. BLUE button: Changes media type. Slideshow Options Jump (Numeric buttons):The TV will jump to the file starting with the letter you input via the numeric buttons on your remote control. Play This (OK button) : Plays the selected file. Up/Down: Navigate. Pause ( Play ( one. Continue ( button) : Plays all media files starting with the selected Lang (Play Preview): Displays selected file in a small preview screen. RED button: Sorts files by name. button): Pauses the slideshow. button): Continues the slideshow. Loop/Shuffle (GREEN button): Press once to disable Loop. Press again to disable both Loop and Shuffle. Press once more to enable only Shuffle. Press again to enable all. You can follow the disabled functions with the change of the icons. Previous/Next (Left/Right buttons): Jumps to previous or next file on slideshow. YELLOW button: Toggles viewing style. GREEN button: Activates Loop/Shuffle functions. Rotate (Up/Down buttons): Rotates the image using up/down buttons. BLUE button: Changes media type. RETURN: Back to file list. INFO: Displays help screen. Playing Music via USB Play ( button): Starts the video playback. Stop ( button): Stops the video playback. Pause ( When you select Music from the main options, available audio files will be filtered and listed on this screen. button): Pause the video playback. Rewind ( button): Goes backward. Forward ( button): Goes forward. Subtitle/Audio (LANG. button): Sets subtitle/Audio. Jump (GREEN button): Jumps to time. Use numeric buttons to type the desired time and press GREEN button again to proceed. English - 15 - Media Browser Settings Up/Down: Navigate. Play ( button): Plays all media files starting with the selected one. Stop ( button): Stops playback. Pause ( button): Pauses the selected playback. You can set your Media Browser preferences by using the Settings dialog. Press “ ” or “ ” button to highlight an item and use “ ” or “ ” button to set. View Style: Sets default browsing mode. RED: Sorts files by Title,Artist or Album. Loop/Shuffle (GREEN button): Press once to disable Loop. Press again to disable both Loop and Shuffle. Press once more to enable only Shuffle. Press again to enable all. You can follow the disabled functions with the change of the icons. 0..9 (Numeric buttons): The TV will jump to the file starting with the letter you input via the numeric buttons on your remote control. Play This (OK button): Plays the selected file. Previous/Next (Left/Right buttons): Jumps to previous or next file to play. YELLOW: Toggles viewing style. BLUE: Changes media type. Music FF/FR Speed: Sets forwarding/advancing speed. Slide Show Interval: Sets slide show interval time. Show Subtitle: Sets subtitle enabling preference. Subtitle Position: Sets subtitle position as up or down. Subtitle Font Size: Sets subtitle font size (max. 54pt). Timeshift Recording IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. • Press (PAUSE) button while watching a broadcast for switching to timeshifting mode. Recordings Library IMPORTANT: To view recordings library, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. To view the list of recordings, select “Recordings Library” and press the OK button. Recordings Library will then be displayed with available recordings. • In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB disk (*). Press (PLAY) button again to watch the paused programme from the stopped moment. • This playback is performed in x1 playback speed. You will see the timeshift gap between the real and the timeshifted programme in the info bar. • Use / (PREVIOUS/NEXT) buttons to move forward or backward on timeshift playback. When the timeshift is reached, timeshifting mode will be quitted and you will switch back to watching normal broadcast. • Press (STOP) button to quit timeshifting mode. (*) Continuous time shift recording’s duration depends on your connected USB disk’s file size and defined Max. Timeshift in the Recordings Configuration menu. See the section, “Recordings” for more information on setting Max. Timeshift. Note: Switching to a different broadcast or source; and viewing main menu are not available during the timeshifting. Instant Recording All the recordings are kept in a list in the recordings library. RED button (Delete): Erases the selected recording. GREEN button (Edit): Makes changes on the selected recording. BLUE button (Sort): Changes the order of the recordings. You can select from a wide range of sorting options. OK button: Activates play options menu: IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. • Press (RECORD) button to start recording an event instantly while watching a programme. The following OSD appears on the screen: • Play from start: Plays the recording from the beginning. • Resume: Recommences the recordings. • Play from offset: Specifies a playing point. Note: Viewing main menu and menu items will not ve available during the playback. (Resume): Recommences the recordings. INFO (Details): Displays the short extended programmes in detail. • Record OSD will then be displayed for a short time and the current event will be recorded. • You can press (RECORD) button on the remote control again to record the next event on the EPG. In this case, OSD will display the programmed events for recording. English - 16 - Changing Image Size: Picture Formats • You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. • Press “SCREEN” button repeatedly to change the image size. Available zoom modes are listed below. Press (STOP) button to cancel instant recording. The following OSD will be displayed: Auto When AUTO is selected, the aspect ratio of the screen is adjusted by the information provided by the selected source (if available). The format being displayed in AUTO mode is completely independent of WSS information which could be included in the broadcast signal or the signal from an external device. Select Yes by using “ ” or “ ” / OK buttons to cancel instant recording. Note: Switching to a different broadcast or source; and viewing Media Browser are not available during the recording. Note: Auto mode only will be available in HDMI, YPbPr and DTV sources. 16:9 This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. Watching Recorded Programmes In the main menu, use “ ” or “ ” buttons to select Media Browser. Highlight Recordings Library item by using “ ” or “ ” button and press OK button to enter. Recordings Library will then be displayed. IMPORTANT: To view recordings library, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. • For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the 16:9 mode to restore the picture to its original shape. Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Select a recorded item from the list (if previously recorded) by using “ ” / “ ” button. Press OK button to view Play Options. Select an option by using “ ” / “ ” or OK buttons. Note: You can shift to screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as panaromic, 14:9 Zoom, Cinema or Subtitle. 14:9 This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. Available playback options: • Play from start: Plays the recording from the beginning. • Resume: Recommences the recordings. • Play from offset: Specifies a playing point. Note: Viewing main menu and menu items will not be available during the playback. Press (STOP) button to stop a playback and return to return to Recordings Library. Slow Forward 14:9 Zoom If you press (PAUSE) button while watching recorded programmes, slow forward feature will be available. You can use button to slow forward. Pressing button consecutively will change slow forwarding speed. This option zooms to the 14:9 picture. English - 17 - 4:3 Colour Shift: Adjust the desired colour tone. Use to view a normal picture (4:3 aspect ratio) as this is its original size. Colour Temp: Sets the desired colour tone. Setting Cool option gives white colours a slight blue stress. For normal colours, select Normal option. Setting Warm option gives white colours a slight red stress. Noise Reduction: If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount. Noise Reduction can be set to one of these options: Low, Medium, High or Off. Game Mode: When Game Mode is set to On, specific game mode settings, which are optimized for better video quality, will be loaded. Panoramic This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. Note: When Game Mode is on, some items in the Picture Settings menu will be unavailable to be set. Picture Zoom:Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema. Reset: Resets the picture settings to factory default settings. While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode. PC Picture Settings For adjusting PC picture items, do the following: Press “ ” or “ ” button to select Picture icon. Picture menu appears on the screen. The top and bottom of the picture are slightly cut off. Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen. Contrast, Brightness, Colour, Colour Temp and Picture Zoom settings in this menu are identical to settings defined in TV picture menu under “Main Menu System”. Sound,Settings and Source settings are identical to the settings explained in main menu system. PC Position: Select this to display PC position menu items. Configuring Picture Settings You can use different picture settings in detail. Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Autoposition: Automatically optimizes the display. Press OK to optimize. H Position: This item shifts the image horizontally to right hand side or left hand side of the screen. V Position: This item shifts the image vertically towards the top or bottom of the screen. Dot Clock: Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Phase: Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Operating Picture Settings Menu Items • Press “ ” or “ ” button to highlight a menu item. • Use “ ” or “ ” button to set an item. • Press “MENU” button to exit. Picture Settings Menu Items Mode: For your viewing requirements, you can set the related mode option. Picture mode can be set to one of these options: Cinema,Game,Dynamic and Natural. Contrast: Sets the lightness and darkness values of the screen. Brightness: Sets the brightness value for the screen. Sharpness: Sets the sharpness value for the objects displayed on the screen. Colour: Sets the colour value, adjusting the colors. English - 18 - Configuring Sound Settings Configuring Your TV’s Settings Sound settings can be configured according to your personal preferences. Detailed settings can be configured to suit your personal preferences. Press “MENU” button and select the first icon by using “ ” or “ ” button. Press OK button to view Sound Settings menu. Press “MENU” button and select Settings ikon by using “ ” or “ ” button. Press OK button to view Settings menu. Operating Settings Menu Items Operating Sound Settings Menu Items • Press “ ” or “ ” button to highlight a menu item. • Press “ ” or “ ” button to highlight a menu item. • Press OK button to select an item. • Use “ ” or “ ” button to set an item. • Press “MENU” button to exit. • Press “MENU” button to exit. Settings Menu Items Sound Settings Menu Items Conditional Access: Controls conditional access modules when available. Volume: Adjusts volume level. Language: Configures language settings. Equalizer: Press OK button to view equalizer sub-menu. Parental: Configures parental settings. Timers: Sets timers for selected programmes. Date/Time: Sets date and time. Sources: Enables or disables selected source options. Other Settings: Displays other setting options of the TV set. Using a Conditional Access Module IMPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF. In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the “MENU” button to return to the previous menu. Note: Equalizer menu settings can be changed manually only when the Equalizer Mode is in User. Balance: This setting is used for emphasizing left or right speaker balance. Headphone: Sets headphone volume. AVL: Automatic Volume Limiting (AVL) function sets the sound to obtain fixed output level between programmes (For instance, volume level of advertisements tend to be louder than programmes). Dynamic Bass: Dynamic Bass is used to increase bass effect of the TV set. Digital Out: Sets digital out audio type. • In order to watch certain digital channels, a conditional access module (CAM) can be necessary. This module must be inserted in the CI slot of your TV. • Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure. • Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV. • The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. • When no module is inserted, “No Common Interface module detected” message appears on the screen. • Refer to the module instruction manual for details of the settings. Viewing Conditional Access Menu (*) (*) These menu settings may change depending on the service provider. Press “MENU” button and select the icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Conditional Access and press OK to view menu items. English - 19 - Configuring Language Preferences Parental Control You can operate the TV’s language settings using this menu. Press “MENU” button and select the fifth icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Language and press OK to continue: To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system. This function enables or disables the menu protection system and allows the PIN code to be changed. Press “MENU” button and select the icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Parental and press OK to continue: To display parental lock menu options, PIN number should be entered. Factory default PIN number is 0000. After coding the correct PIN number, parental settings menu will be displayed: Use “ ” or “ automatically. ” button to set an item. Settings are stored Menu: displays the system language. Preferred These settings will be used if available. Otherwise the current settings will be used. • Audio: Sets the preferred audio language. • Subtitle: Sets the subtitle language. Selected language will be seen in subtitles. • Teletext: Sets teletext language. Parental Settings Menu Operation • Select an item by using “ ” or “ ” button. • Use “ ” or “ ” button to set an item. • Guide: Sets the preferred Guide language. • Press OK button to view more options. Current (*) (*) These settings can be changed if only the broadcaster supports. Otherwise, settings will not be available to be changed. Audio: Changes the audio language for the current channel. • Subtitle: Sets the subtitle language for the current channel. Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below: Language Settings Menu Lock: Menu lock setting enables or disables the menu access. You can disable access to the installation menu or the whole menu system. Maturity Lock (optional): When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast. Child Lock (optional): When Child Lock is set, the TV can only be controlled by the remote control. In this case the control panel buttons will not work, except for the Standby Off/On button. When Child Lock is activated you are able to switch the TV into Standby mode with the Standby Off/On button. To switch the TV on again, you need the remote control. Hence, if one of those buttons is pressed, Child Lock Is On will be displayed on the screen when the menu screen is not visible. Set PIN: Defines a new PIN number. Use numeric buttons to enter a new pin number. You will need to code your new pin a second time for verification purposes. IMPORTANT: The factory default pin number is 0000, if you change the pin number make sure you write it down and keep it safe. In the configuration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set. Notes: • System Language determines the on-screen menu language. • Audio Language is used for selecting the soundtrack of a channels. • Primary settings are the rst priority when multiple choices are available on a broadcast. Secondary settings are the alternatives when the rst options are not available. English - 20 - You set recording timer’s end time to end later by using this settings. Timers To view Timers menu, press “MENU” button and select Channel List icon by using “ ” or “ ” button. Press OK button to view Channel List menu. Use “ ” or “ ” button to highlight Timers and press OK to continue: Setting Sleep Timer This setting is used for setting the TV to turn off after a certain time. • Highlight Sleep Timer by using “ ” or “ ” button. • Use “ ” or “ ” button to set. The timer can be programmed between Off and 2.00 hours (120 minutes) in steps of 30 minutes. Setting Programme Timers You can set programme timers for a particular programme using this feature. Press “ ” button to set timers on an event. Programme timer function buttons will be displayed on the screen. Adding a Timer • Press YELLOW button on the remote control to add a timer. The following menu appears on the screen: Network Type: This feature is unavailable to be set. Timer Type: You can select timer type as Record or Timer. Channel: Changes channel by using “ ” or “ ”. (*) Available only for EU country options. Max Timeshift This setting allows you to set the maximum time allowed for timeshifting. Duration options are approximate and can change accordingly, depending on the broadcast received. Format Disk IMPORTANT: Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 if you activate this feature. •If you want to delete all files on the connected USB hard disk drive or memory stick, you can use Format Disk option. • Also, if your USB disk malfunctions, you can try formatting the USB disk. In most cases formatting the USB disk will restore normal operation; however, ALL the data stored on the USB disk will be lost in such a case. • Press OK button while the Format Disk option is highlighted. A menu will appear on the screen, requiring you to enter a pin number. If you have not changed the pin number, the factory default is 0000. After you enter the pin, a pop-up menu appears on the screen to ensure that the hard disk should be formatted, select “YES” and press OK to format the hard disk. Select “NO” and press OK to cancel. Ensure you back up important recordings before you format the USB disk unit. Hard Disk Info Record Type: This item is unavailable to be set. To view the details about the USB disk, highlight Hard Disk Info by using “ ” or “ ” key and press OK. USB disk information will be displayed: Date: Enter a date using the numeric buttons. Start: Enter a starting time using the numeric buttons. End: Enter an ending time using the numeric buttons. Duration: Displays duration between the starting and ending time. Repeat: Sets a timer to be repeated as Once, Daily or Weekly. Use “ ” or “ ” buttons to select an option. Configuring Date/Time Settings Select Date/Time in the Settings menu to configure Date/Time settings. Press OK button. Change/Delete: Sets the change/delete permission. Playback: Sets the playback permission and parental settings. • Press GREEN button to save the timer. Press RED button to cancel. Editing a Timer • Select the timer you want to edit by pressing “ ” or “ ” button. • Press GREEN button. Edit Timer menu screen will be displayed. • When finished with editing, press GREEN button to save. You can press “MENU” button to cancel. Deleting a Timer • Use “ ” or “ ” buttons to highlight Date/Time. • Select the timer you want to delete by pressing “ ” or “ ” button. Date,Time,Time Settings Mode and Time Zone Setting will be available. • Press RED button. • Select YES by using “ ” or “ ” buttons to delete the timer. Select NO to cancel. Recording Configuration Select Recording Configuration item in the Settings menu to configure recording settings. The following menu is displayed for recording configuration. Use “ ” or “ ” buttons to highlight the Time Settings Mode. Time Settings Mode is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL. When AUTO is selected, Date/Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone can be altered: • By pressing “ ” or “ ” buttons select Time Zone. Use “ ” or “ ” buttons to change the Time Zone between GMT-12 or GMT+12. Date/Time on the top of the menu list will then change according to the selected Time Zone. • Changes are automatically stored. Press “MENU” to exit. The following options are available for adjustments: Start Early (*) You set recording timer’s starting time to start earlier by using this setting. (*) Available only for EU country options. End Late (*) English - 21 - Configuring Source Settings You can enables or disable selected source options. The TV will not switch to the disabled source options when “SOURCE” button is pressed. You can enable or disable automatic upgrade by setting Automatic Scanning option. You can manually search for new software by selecting Scan for upgrade. Hard of Hearing: If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals. Audio Description: Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary). You can use this feature, only if the broadcaster supports that additional narration track. • Select Sources in the Settings menu and press OK button. • Press“ ” or “ ” buttons to select a source. • Use “ ” or “ ” button to enable or disable the selected source. Changes are automatically stored. Configuring Other Settings To view general configuration preferences, select Other Settings in the Settings menu and press OK button. Auto TV Off: You can set the timeout value of auto off feature.After the timeout value is reached and the Tv is not operated for selected time , the TV will go off. Standby Search (optional): Use “ ” or “ ” button to select Standby Search and then press “ ” or “ ” button to set this setting as On or Off. If you change Standby Search to Off, this function will be unavailable.To use Standby search please make sure that you select Standby Search as On. If the Standby Search is set to On, when the TV is in standby mode, available broadcasts will be searched. If the TV locates any new or missing broadcasts, a menu screen will be displayed, asking you whether or not to execute these changes. Other Features Displaying TV Information: Programme Number, Programme Name, Sound Indicator, time, teletext, channel type and resolution information is displayed on the screen when a new programme is entered or “INFO” button is pressed. Mute Function: Press “ ” button to disable sound. Mute indicator will be displayed in the upper side of the screen. To cancel mute, there are two alternatives; the first one is pressing the “ ” button and the second one is increasing the volume level. Picture Mode Selection: By pressing PRESETS button, you can change Picture Mode settings in accordance with your viewing requirements. Available options are Dynamic, Natural and Cinema. Operation • Press “ ” or “ ” buttons to select an item. Displaying Subtitles: Press LANG button to select subtitle language and press SUBTITLE button to activate or deactivate subtitles. • Use “ ” or “ ” button to set an option. • Press OK button to view a sub-menu. Selected subtitle language may not be stored when you change channels. Menu Timeout: Changes timeout duration for menu screens. Scan Encrypted: When this setting is on, search process will locate the encrypted channels as well. If it is set as Off, encrypted channels will not be located in automatic search or manual search. Backlight (optional): This setting controls the backlight level and it can be set to Auto, Maximum, Minimum and Medium. To omit this, you should set the Preferred Subtitle Language option in the Language Settings menu to the desired language. This enables the TV to switch to the preferred subtitle language when the channel is changed. Power Save Mode: Use “ ” or “ ” button to select Power Save Mode.Press “ ” or “ ” button to set Power Save Mode as On or Off. See the section, “Environmental Information” in this manual for further information on Power Save Mode. Note : Backlight function will be invisible if Power Save Mode is set to on. Blue Background: Activates or deactivates blue background system when the signal is weak or absent. Software Upgrade: To ensure that your TV always has the most update information, you can use this setting. In order for the proper operation, please ensure that the TV is set to standby mode. English - 22 - Teletext The teletext system transmits information such as news, sports and weather on your TV. Note that if the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted. Teletext function buttons are listed below: “ ” Teletext / Mix : Activates teletext mode when pressed once. Press again to place the teletext screen over the programme (mix). Pressing again will quit the teletext mode. “RETURN” Index: Selects the teletext index page. “INFO” Reveal: Shows hidden information (e.g. solutions of games). “OK” Hold: Holds a text page when convenient. Press again to resume. “ ”/“ ” Subcode Pages : Selects subcode pages if available when the teletext is activated. P+ / P- and numbers (0-9): Press to select a page. Note: Most TV stations use code 100 for their index pages. Coloured Buttons (RED/GREEN/YELLOW/BLUE) Your TV supports both FASTEXT and TOP text systems. When these systems are available, the pages are divided into groups or topics. When FASTEXT system is available, sections in a teletext page will become colour-coded and can be selected by pressing the coloured buttons. Press a coloured button that corresponds to with your needs. The coloured writings will appear, showing you which coloured buttons to use when TOP text transmission is present. Pressing “ ” or “ ” commands will request the next or previous page respectively. USB Is too Slow: If “USB is too slow” message is displayed on the screen while starting a recording, try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. Try connecting another USB disk. Picture Breakup: If whilst watching DTV you experience picture or sound disruptions then please retune your TV using “First Time Installation” and make sure you select the correct region/transmitter when prompted by the “Choose Region” on screen message. Please note regional selection can only be made if “First time Installation” is used. TV Switches Randomly to Standby: The TV by default will switch back to standby after 4 hours if the TV remote is not used, this is most likely to occur if you are you are using an external set-top box as a signal source or you are out of the TV room. This power saving feature can be switched off or the activation time extended or reduced via the menu “Settings-> Other Settings -> Auto TV OFF”. The TV will also return to stand-by if the aerial signal is lost for more than 5 minutes. Dark Picture: When the TV is first switched on the back lights brightness is reduced, this is normal operation and the brightness will increase to the running level within a few minutes. Please note when “Backlight” is set to “Auto” the backlight brightness will change with picture content. Tips Screen Care: Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom part. Image Persistence: Please note that ghosting may occur while displaying a persistent image.LCD TVs’ image persistence may disappear after a short time. Try turning off the TV for a while. To avoid this, do not leave the screen in still picture for extended periods. No Power: If your TV system has no power, please check the main power cable and connection to the mains socket outlet. Poor Picture: Have you selected the correct TV system? Is your TV set or house aerial located too close to a non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable? Check if you have entered the correct frequency. Please retune the channels. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals. No Picture: Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected. Sound: You can not hear any sound. Did you perhaps interrupt the sound, pressing the button? Sound is coming from only one of the speakers. Is the balance set to one extreme? See Sound Menu. Remote Control: Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons on the TV. Input Sources: If you cannot select an input source, it is possible that no device is connected. Check the AV cables and connections if you have tried to connect a device. Recording Unavailable: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. If you cannot perform recording, try switching off the TV and then re-inserting the USB device while the TV is switched off. English - 23 - Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Source Supported Signals Available PAL 50/60 O EXT NTSC 60 O (SCART) RGB 50 O Index Resolution Frequency 1 640x400 70 Hz RGB 60 O 2 640x480 60 Hz PAL 50/60 O 3 640x480 75 Hz 4 800x600 60 Hz 480I 60Hz O 5 800x600 75 Hz 480P 60Hz O 6 1024x768 60 Hz 576I 50Hz O 7 1024x768 70 Hz 576P 50Hz O 8 1024x768 75 Hz 720P 50Hz O 720P 60Hz O 1080I 50Hz O 9 1152x864 Side AV YPbPr 75 Hz NTSC 60 O 10 1280x768 60 Hz 11 1280x1024 60 Hz 1080I 60Hz O 12 1360x768 60 Hz 1080P 50Hz O 1080P 60Hz O 480I 60Hz O 480P 60Hz O HDMI1 HDMI2 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O 1080P 24 HZ O (X: Not Available, O: Available) In some cases a signal on the LCD TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment. English - 24 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 480i 60Hz þ 480p þ 576i þ 576p þ 720p þ 1080i þ þ þ þ 1080p þ þ þ þ Appendix D: Supported File Formats for USB Mode Supported Players Player Stream Video Decoder (MSVD) Audio Decoder (MSAD) Audio MP3 None MP3 Audio WAV/AIFF None-- LPCM MPEG1 Program Stream MPEG-1 MPEG1 MP3, AC-3 and PCM MPEG2 Program Stream MPEG-2 MPEG2 MP3, AC-3 and PCM AVI (Xvid) XVID MPEG2 MP3, AC-3 and PCM English - 25 - Appendix E: Software Upgrade • Your TV is capable of finding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface • It is possible manually to check if there is a new software upgrade for your TV set. • Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu. • In Upgrade Options menu select Scan for upgrade and press OK button. • If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download progress. When download completes with success a message is displayed for reboot to activate new software. Press OK to continue with the reboot operation. 2) 3.AM search and upgrade mode • If Automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and searches broadcast channels for new software upgrade. If new software is found and downloaded successfully, with next power up TV opens with new software version. Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software is finished successfully. During reboot TV makes final initializations. In reboot sequence panel power is closed and front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated. • If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few times more. If your set still can not operate, please call the service personnel to fix the problem for you. Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause your TV not to re-open again and can only be fixed by service personnel. Information for Users on Disposal of old Equipment and Batteries [European Union only] Battery Products These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling. Notice: T he sign Pb below the symbol for batteries indicates that this battery contains lead. English - 26 - Specifications TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50Hz. AUDIO German + Nicam Stereo AUDIO OUTPUT POWER (WRMS.) (10% THD) 2x6 POWER CONSUMPTION (W) 150 W (max) < 0,5 W (Standby) PANEL 16:9 display, 32” (80 cm) Screen Size DIMENSIONS (mm) DxLxH (With foot): 205,5 x 776,5 x 558 Weight (Kg): 11,55 DxLxH (Without foot): 87 x 776,5 x 524 Weight (Kg): 9,95 MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile Frequency range: 474-850 MHz for UK models Digital Reception 170-862 MHz for EU models Transmission standard: DVB-T. MPEG-2 Demodulation: COFDM with 2K/8K FFT mode FEC: all DVB modes Video: MP@ML, PAL, 4:3/16:9 Audio: MPEG Layer I&II 32/44.148kHz. English - 27 - for UK Dimensional Drawings English - 28 - End of life disposal English - 29 - Detachable Stand Uninstallation Method To install the TV on the wall, first of all, foot assembly should be removed. Unscrew the 4 screws that attach the foot assembly to the panel and remove the foot assembly from the panel. English - 30 - Screw Dimensions L D Model D L Item Number LC-19LE510E Ø4 30 4 LC-19LE510K M4 18 4 LC-22LE510E Ø4 30 4 M4 18 4 Ø4 30 4 LC-22LE510K LC-22DV510E LC-22DV510K LC-24LE510E LC-24LE510K LC-24DV510E To the wall To the product To the wall To the product To the wall 75 x 75 (W x H) 18 4 LC-32LE510E Ø4 30 8 LC-32LE530E M4 18 4 LC-40LE510E Ø4 30 8 LC-40LE530E M8 30 4 LC-32SH130E Ø4 30 8 LC-32SH340E M6 30 4 LC-40SH340E Ø4 30 8 LC-40SH340K M6 30 4 LC-32SH130K 75 x 75 (W x H) Installation of the Screw 75 x 75 (W x H) M4 LC-24DV510K VESA To the product 200 x 100 (W x H) 400 x 400 (W x H) 200 x 100 (W x H) 400 x 400 (W x H) English - 31 - To the wall To the product To the wall To the product To the wall To the product To the wall To the product
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : SCEE-Smolka Create Date : 2011:09:26 13:47:15+03:00 Keywords : LC-32SH130K, LC32SH130K Modify Date : 2011:09:28 15:35:51+02:00 Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:9505a1d8-e411-44e8-b0e6-9fa8e1c1b317 Document ID : adobe:docid:indd:3b4c6af9-64da-11df-ac61-cf0bb8a3b871 Rendition Class : proof:pdf Derived From Instance ID : 3b4c6af8-64da-11df-ac61-cf0bb8a3b871 Derived From Document ID : adobe:docid:indd:b4396718-4e17-11df-b646-9257d7042330 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 96.00, 96.00, 72.00, 96.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 96.00, 96.00, 72.00, 96.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:eec1dac1-129c-4f0d-bbf9-442cad2a295a, uuid:66cb1d80-2f18-4bc1-b034-c1f915c05bb1, uuid:85a12de8-9163-459e-b224-52ca2394b7d9, uuid:0096370c-170c-42ac-9272-3f8a053ce534, uuid:6b3d14f9-313a-481a-a949-2ab1691c1740, uuid:3e58c014-3b3f-44fb-9514-a4000a0444b7, uuid:d3866c27-6084-441d-abd6-427ce3bcd894, uuid:424ff298-cbb6-4784-99c1-5a0f0293d44d, uuid:a5da8154-3ca3-4368-9253-30718b275873, uuid:2e3d5776-aee9-4672-815b-4b7f8a262727, uuid:d3554c6f-3c1c-4b81-84c9-bf070919b918, uuid:d81e1584-dffb-11de-a305-c9a65a2fc68d, uuid:3d1d7ca2-6f3a-4107-a851-8b548316e83a, uuid:54e32a83-61fb-4c4b-85ca-ef7b5996ccb8, uuid:4b635a26-1a4b-44bb-bbbb-7e136879f7e2, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:3d1d7ca2-6f3a-4107-a851-8b548316e83a, uuid:8fc101a1-c0ff-4aec-a4b5-8ab16864ad59, uuid:3d1d7ca2-6f3a-4107-a851-8b548316e83a, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:d9c64f27-4b0c-4e17-96a7-0e0fccc85e74, uuid:34e0885d-4b86-42bd-a7bd-0ee88b37295e, uuid:7550597a-a621-4d83-b2e3-9d45b5aa664c, uuid:997cdc3b-8b1b-496d-82e3-8d14f8987731, uuid:45e586e4-e436-47a0-b1c7-61a9f7cfbabf, uuid:24958a2b-440d-4113-814f-7007aa128110, uuid:1f29576a-728d-46fd-9e23-ccf3281f0e84, uuid:090cab3a-6b27-4996-8b75-3de63d935c16 Manifest Reference Document ID : uuid:1bee730a-2c60-4aa1-93e1-e7bad2e8c361, uuid:32636b2a-a29a-4068-b4dc-1510328fd568, uuid:181EFE7F6910DF118F12A98903A2D826, uuid:7A4B82DD45FBDE119204832B46977A95, uuid:7E4B82DD45FBDE119204832B46977A95, uuid:7C4B82DD45FBDE119204832B46977A95, uuid:c80bea52-72c0-435d-b24c-2873be664533, uuid:d57b2b01-e1d2-46e0-81ae-40223b75745c, uuid:23af0c9f-8c48-4d20-a8df-28f2811ca4b8, uuid:093b315e-2a7f-49b9-bded-7d5ee680de30, uuid:dd953206-8dfc-489f-a757-781111462d20, adobe:docid:photoshop:d81e1583-dffb-11de-a305-c9a65a2fc68d, uuid:46d2ecf8-11f4-4d89-8bb2-d7627e5cf66d, uuid:19b92213-8baa-4313-b74c-8d799147201f, uuid:d408da58-60ce-4787-b20b-e962957fba09, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:46d2ecf8-11f4-4d89-8bb2-d7627e5cf66d, uuid:e7a3cd17-325f-426c-b007-b8203e070fed, uuid:46d2ecf8-11f4-4d89-8bb2-d7627e5cf66d, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:8366d651-7135-4d09-bd4b-ae0293b0c36b, uuid:63e87aa0-087c-4d48-b147-4b0b1ead4414, uuid:b3b3fe25-91fc-4d15-943d-c9a29f28febb, uuid:c64fc02f-1cbc-4a19-872b-e99c981cdee6, uuid:7A6040F6620BDD118E57AFEB5A80E147, uuid:1fb5734a-56d9-4814-a47a-5e2a7cb33847, uuid:56C237FF8910DF118F12A98903A2D826, uuid:5a38f76b-c076-4d5a-8938-ed2c55c8e031 Metadata Date : 2011:09:28 15:35:51+02:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10180 bytes, use -b option to extract) Format : application/pdf Title : LC-32SH130K Operation-Manual GB Description : Operation Manual, English Creator : SCEE-Smolka Subject : LC-32SH130K LC32SH130K Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 32EXIF Metadata provided by EXIF.tools