Shen Zhen Lianhua Electronics MP03 Bluetooth Speaker & Power Bank User Manual 1
Shen Zhen Lianhua Electronics Co., Ltd. Bluetooth Speaker & Power Bank 1
User Manual
U S E R M A N U A L
• Liquids - Do not expose your device to
liquids or extreme humidity. Liquids can
get into the product’s circuits, leading to
damage and corrosion. If it does get wet,
don’t try to accelerate drying with the use
of an oven or dryer, as this may damage
the device.
•Extreme heat/cold – Avoid placing your
device near a heat source or in direct
sunlight. Extreme temperatures can cause
the battery to swell, leak or malfunction.
• Cleaning – Use a clean cotton cloth. Don’t
use alcohol or other cleaning solutions.
• Never place the device over other electronic
devices.
• Do not attempt to repair or take apart
the device by yourself.
Precautions
1
A.
B. Micro USB to USB Cable
US AC to USB Power Charger Adapter Plug
Included Accesories
2
USB Charging output Jack & Light
Red indicator light–Power indicator
Green Indicator Light –Charger indicator
Blue Indicator Light
Bluetooth Indicator
Device Power on/off switch
Push key 3 seconds
Device Overview
3
AB
IN
Pictures are for illustration purposes only. Actual items
may slightly vary in appearance and design.
Charging indicator Bluetooth indicator MIC
Battery life
1. Connect the Micro USB cable (included)
to the Micro USB port on the Powerplay 2
and connect the USB Cable to the Power
Charger Adapter Plug.
2. Plug the Adapter Plug into an electrical
wall outlet to fully charge the battery
(approx. 8 hours).
3. Red indicator light is on while charging
and will turn off when fully charged.
Do not charge additional devices while
charging the Powerplay 2, this will
damage the device.
Battery Management
4
4. The number indicate % of battery life on
Powerplay 2.
Pairing your Bluetooth enabled
device to your Powerplay 2
1. Go to your mobile device’s Network
Settings.
2. Set your Bluetooth device to discover.
Follow your device’s instruction guide.
This usually involves going into a “setup”,
“connect” or “Bluetooth” menu.
Powerplay 2 doesn't work with all apps.
5
iPhone
Step 1
Android
Settings>Wireless&neworksettings>
BluetoothSettings>Bluetoothdevices
Step 1
iPhone
Settings>Bluetooth>Devices
Step 2
Android
Settings>Wireless & nework settings>
BluetoothSettings>Bluetoothdevices
Step 2
4. Locate the Powerplay 2 on your Bluetooth
device & select “Powerplay2” from the list.
5. Your Powerplay 2 will beep when pairing is
complete.
iPhone
Settings>Bluetooth>Devices
Step 3
Keyin password “0000".
6. Using key to play and pause music
Bluetooth.
playing.
Push key 3 seconds to turn on 3.
Android
Settings>Wireless & nework settings>
Bluetooth Settings Bluetooth devices>
Step 3
In case of unsuccessful pairing, repeat the
steps on previous pages.
Android
Charging Devices
1. Connect the USB end of the charging
cable that came with your mobile device
to the OUT port on the Powerplay 2.
2. Connect the micro USB end to your
mobile device.
3. During charging, the red indicator light
will stay on.
6
IN
AUX
Hands-free calling
1. Make, receive and end call by push
bottom.
2. Control volume by using Powerplay 2
3. When not using the Powerplay 2 bluetooth,
press bottom 3 seconds to turn off to
7
.
save power.
Specs
• Weight < 7.4 ounces
• Size: 4.65 inches (L)*1.54 inches (W)*1.54
inches (H)
• Rechargeable Battery: Lithium - polymer
3.7V 5200 mAh
• Power Consumption: DC5V/500mA ~1A
• Super High Capacity Rechargeable
Battery 5200mAh, about 300% of iPhone
4 battery life
• Speaker Frequency: 100Hz ~ 20KHZ
• Frequency Range: 2.4000Ghz-2.480 GHz
• Input/Output voltage: 5V
• Signal and noise ratio: ≥75dB
• Power of loudspeaker: 2W*2
• Charging time – Approximately 8 hours
• Playing time – Approximately 32 hours
(volume at 60%)
• Hands-free calling – Bluetooth connector
• LED indicator Light for Bluetooth
• Effective Distance – up to 33 feet
8
