Shen Zhen Lianhua Electronics MP03 Bluetooth Speaker & Power Bank User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2045121
Application ID	Y4IqzqMgQm/pX3Uu1d6s1g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	461.55kB (5769333 bits)
Date Submitted	2013-08-16 00:00:00
Date Available	2013-08-16 00:00:00
Creation Date	2013-03-02 11:26:35
Producing Software	Corel PDF Engine Version 14.0.0.653
Document Lastmod	0000-00-00 00:00:00
Document Title	第1页.cdr
Document Creator	CorelDRAW
Document Author:	Administrator

USER MANUAL
1 Precautions
•
•
•
•
•
Liquids - Do not expose your device to
liquids or extreme humidity. Liquids can
get into the product’s circuits, leading to
damage and corrosion. If it does get wet,
don’t try to accelerate drying with the use
of an oven or dryer, as this may damage
the device.
Extreme heat/cold – Avoid placing your
device near a heat source or in direct
sunlight. Extreme temperatures can cause
the battery to swell, leak or malfunction.
Cleaning – Use a clean cotton cloth. Don’t
use alcohol or other cleaning solutions.
Never place the device over other electronic
devices.
Do not attempt to repair or take apart
the device by yourself.
2 Included Accesories
A. US AC to USB Power Charger Adapter Plug
B. Micro USB to USB Cable
B
Pictures are for illustration purposes only. Actual items
may slightly vary in appearance and design.
3 Device Overview
USB Charging output Jack & Light
Red indicator light–Power indicator
Green Indicator Light –Charger indicator
Blue Indicator Light
IN Indicator
Bluetooth
Device Power on/off switch
Push
key 3 seconds
Battery life
Charging indicator Bluetooth indicator MIC
4 Battery Management
1.
2.
3.
Connect the Micro USB cable (included)
to the Micro USB port on the Powerplay 2
and connect the USB Cable to the Power
Charger Adapter Plug.
Plug the Adapter Plug into an electrical
wall outlet to fully charge the battery
(approx. 8 hours).
Red indicator light is on while charging
and will turn off when fully charged.
Do not charge additional devices while
charging the Powerplay 2, this will
damage the device.
4.
The number indicate % of battery life on
Powerplay 2.
5 Pairing your Bluetooth enabled
device to your Powerplay 2
Powerplay 2 doesn't work with all apps.
1.
2.
Go to your mobile device’s Network
Settings.
Set your Bluetooth device to discover.
Follow your device’s instruction guide.
This usually involves going into a “setup”,
“connect” or “Bluetooth” menu.
Step 1
iPhone
Step 1
Android
Settings>Wireless & nework settings>
Bluetooth Settings>Bluetooth devices
Step 2
iPhone
Settings>Bluetooth>Devices
Step 2
Android
Settings>Wireless & nework settings>
Bluetooth Settings>Bluetooth devices
3.
4.
5.
6.
Push
key 3 seconds to turn on
Bluetooth.
Locate the Powerplay 2 on your Bluetooth
device & select “Powerplay2” from the list.
Keyin password “0000".
Your Powerplay 2 will beep when pairing is
complete.
Using
key to play and pause music
playing.
Step 3
iPhone
Settings>Bluetooth>Devices
Step 3
Android
Settings>Wireless & nework settings>
Bluetooth Settings>Bluetooth devices
Android
In case of unsuccessful pairing, repeat the
steps on previous pages.
6 Charging Devices
1.
2.
3.
Connect the USB end of the charging
cable that came with your mobile device
to the OUT port on the Powerplay 2.
Connect the micro USB end to your
mobile device.
During
charging, the red indicator light
IN
will stay on.
AUX
7 Hands-free calling
1.
Make, receive and end call by push
bottom.
2.
Control volume by using Powerplay 2
3.
When not using the Powerplay 2 bluetooth,
press
bottom 3 seconds to turn off to
save power.
8 Specs
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Weight < 7.4 ounces
Size: 4.65 inches (L)*1.54 inches (W)*1.54
inches (H)
Rechargeable Battery: Lithium - polymer
3.7V 5200 mAh
Power Consumption: DC5V/500mA ~1A
Super High Capacity Rechargeable
Battery 5200mAh, about 300% of iPhone
4 battery life
Speaker Frequency: 100Hz ~ 20KHZ
Frequency Range: 2.4000Ghz-2.480 GHz
Input/Output voltage: 5V
Signal and noise ratio: ≥75dB
Power of loudspeaker: 2W*2
Charging time – Approximately 8 hours
Playing time – Approximately 32 hours
(volume at 60%)
Hands-free calling – Bluetooth connector
LED indicator Light for Bluetooth
Effective Distance – up to 33 feet


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 14.0.0.653
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : Administrator
Title                           : 第1页.cdr
Creator Tool                    : CorelDRAW
Modify Date                     : 2013:07:24 17:38:11+08:00
Metadata Date                   : 2013:07:24 17:38:11+08:00
Document ID                     : uuid:4a4e1a2a-d3c1-448c-890e-1a88bce076e2
Instance ID                     : uuid:79fecb14-e461-4c50-972e-8120ba4b6b63
Has XFA                         : No
Page Count                      : 16
Create Date                     : D:20130302112635Z
Author                          : Administrator

EXIF Metadata provided by EXIF.tools