Shen Zhen MTC 6534580 LED TV User Manual MUAV6550Y 34580
Shen Zhen MTC Co., LTD LED TV MUAV6550Y 34580
User Manual
LED TV USER MANUAL MUAV6550Y-34580 Please read this User Manual carefully to ensure use of this product and keep this manual for future reference Contents Safety and warnings.............................................................2-3 Introduction........................................................................... 4 Installation........................................................................ ..5-8 Remote Control.................................................................9-10 Operation........................................................................ 11-14 Trouble Shooting...................................................................15 -1- SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTION WARNING Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: – Using cabinets or stands recommended by the manufacturer of the television set. – Only using furniture that can safely support the television set. – Ensuring the television set is not overhanging the edge of the supporting furniture. – Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. – Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. – Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Unplug this apparatus during lighting storms or when unused for long periods of time. 13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable. 15) The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc. 16) No naked flame sources, such as lighted candles, should be placed on the apparatus. 17) Attention should be drawn to the environmental aspects of battery disposal. 18) The use of apparatus in moderate climate. 19) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Warning: To avoid any injury caused by lean of the product, please always ensure the whole product was placed within the table surface in horizontal. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literaturaccompanying this unit. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. -2- SAFETY AND WARNINGS This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Step one: Use the expansion bolts(4*36PWA) to fix the wall mount brackets into the wall Step Two: Fix the wall mount screws (M6x8mm/4pcs) into the rear side of the LCD TV,using the tongue of 8kgf.cm. * The TV appearance subject to material object. Step Three: Put the LCD TV with wall mount screws onto the wall mount brackets. Warning: the angle between the TV and wall must not be bigger than 3º. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNINGS AND CAUTIONS Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Warning To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. Warning Do not drop or push objects into the Caution Do not trap the power supply cord under the television receiver. Caution Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall. Caution Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it should fall. television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Caution When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet. Caution Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components. Dim:515*320mm(不包括底座) Caution If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be -3- dangerous. INTRODUCTION Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this manual carefully and keep it handy for easy reference. INSTALLATION *Locate the TV in the room where light does not strike the screen directly. *Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. *Allow enough space between the TV and the wall to permit ventilation. *Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. *Do not cover the ventilation openings when using theTV. CAUTION Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LED-TVs are high voltage instruments. When you clean up dust or water drops on the LED PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by qualified TV service personnel. Main features ① Used as Television, display terminal, PC display; ② High luminance, wide viewing Angle; 4 NICAM; HDMI interface and SCART Interface; Main parameter Panel TV System Video Signal System Input Power Voltage Power consumption Audio Output Power (THD 7%) Signal Input Horizontal definition(TV line) 65 PAL-B/G、I 、 D/K SECAM- B/G、D/K、L、LL PAL/NTSC/SECAM 100-240V~50/60Hz 198W 2x8W Analog RGB(PC)x1 High-Definition Multimedia Interface(HDMI) x2 Video INput x1 Audio Input x2 USB Input x1 Y、Cb (Pb) 、 Cr (PR)x1 Mini SCART X1 Composite Video input >=350 Super Video Input >=400 Y Cb(Pb) Cr(Pr) >=400 -4- INSTALLATION Front panel KEYBOARD The keyboard is located at the bottom left near the right side of signal indicator. Remote Buttons Bottom “ ” VOL- and move left “ ” VOL+ and move right “ “ ” CH- and move down ” CH+ and move up “ Center button ” power key and source key, hold it for a long time, the TV will power down. KEYBOARD 1: Remote control sensor. 2: Indicator LED: RED 3: Key board STANDBY. REAR Connections AC-INPUT 100-240V 50/60Hz OPTICAL VIDEO All the terminals are (from left to right): AC POWER SOURCE, OPTICAL, VIDEO, AUDIO INPUT. SIDE Connections HDMI3 HDMI1 HDMI2 HEADPHONE YPbPr MHL All the terminals are (from left to right): HDMI1, HDMI2, HDMI3/MHL, HEADPHONE, YPbPr, USB, RF. -5- USB RF INSTALLATION ANTENNA Note: Aerial connections: F (female). Input impendance: 75 unbalanced. PRESET MODE (HDMI) RESOLUTION V.Freq.(Hz) 800*600 60 H.Freq.(KHz) 37.88 1024*768 60 48.36 1360*768 60 47.7 1280*768 60 47.3 1920*1080 60 67.5 3840*2160 30 67.5 3840*2160 50 112.5 3840*2160 60 135 -6- INSTALLATION -7- INSTALLATION AV EQUIPMENT There are three HDMI ports located on the back of your TV. You can connect a Blu-ray player, DVD player, or other video equipment through these ports. The HDMI3 port is MHL enabled. You can connect MHL devices, such as the compatible mobile phones and tablets. NOTE: a USB to HDMI cable is required to connect a mobile phone or tablet to the TV. Please check the documentation of your device. There is one component (Y, Pb, Pr) and video input located on your TV. You can connect a VCR, cable box, or other video equipment to these jacks. Please see the diagram below. You may also need to refer to the owner's manual of the device that you are trying to connect. HDMI3 HDMI1 HDMI2 HEADPHONE USB YPbPr MHL RF VIDEO EQUIPMENT with YPbPr Y Yellow (video) R Red (audio R) W White(audio L) R Red(Pr or Cr) B Blue(Pb or Cb) G Green(Y) AC-INPUT 100-240V 50/60Hz OPTICAL VIDEO The television's inputs can be connected to the following types of equipment: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc..... YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i, 1080p. -8- REMOTE CONTROL REMOTE CONTROL POWER MUTE 20 TV AUDIO 21 RECALL/GOTO 22 TV MENU SOURCE 23 OK 24 25 DVD MENU EXIT SOUND VOL CH PIC SLEEP 28 DVD SETUP 19 27 ASPECT 10 11 12 13 14 15 16 17 18 26 TV/RADIO TEXT 29 EPG FAV INFO 30 DVD/USB TITLE PBC ANGLE RETURN DISPLAY REVEAL HOLD LIST INDEX SUBPAGE SIZE MIX FREEZE DVD AUDIO SUBTITLE 31 32 33 34 35 36 38 37 -9- REMOTE CONTROL TELETEXT Press: TEXT Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language(cable networks, satellite channels, etc.) You will obtain: This is used to call or exit teletext modes. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number. If the channel selected does not broadcast teletext, theindication 100 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel). Enter the number of the page required using the 0 to 9 up/down. SELECTING A PAGE Example: page 120, enter 120. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues to search, this means that the page is not transmitted. Select another number. DIRECT ACCESS TO THE ITEMS INDEX SUB PAGE HOLD REVEAL LIST Coloured are as are displayed at the bottom of the screen. The 4 coloured keys are used to access the items or corresponding pages. The coloured areas flash when the item or the page is not yet available. This returns to the contents page (usually page 100). Certain pages contain sub-pages which are automatically displayed successively. This key is used to stop or resume subpage acquisition. The indication appears top left. To freeze the page. To display or hide the concealed information (games solutions). The user can set four favorite pages to be directly linked to the four color keys. While list mode is activated, it is not possibility to use TOP or FLOF navigation with the colorkeys. The favorite page numbers should be stored and restored to/from nonvolatile memory for each channel by the system software. Insert Batteries Into the Remote Control 1. Remove the battery cover. 2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit. Remark: 1) Alkaline Battery Recommended. 2) Remove batteries when they are exhausted or if the remote control is not to be used for Long time. -10- OPERATION Installation Guide Channel Tuning TV : 0 Programme(s) DTV : 0 Programme(s) Radio : 0 Programme(s) Date: 0 Programme(s) Please select an OSD Language Cesky English Dansk Espanol Fran ais Magyar Hrvatski Nederlands Portugues Deutsch Italiano ka Polski 96% Pycck Norsk UHF CH 68 DTV OK NOTE: All the channels including ATV, DTV and Radio can be tuning by one time,if the Tune Type is DTV+ATV . Country Norway Rumania Slovenia Switzerland Morocco Poland Russian Spain UK Tunis Sweden NewZealand Algeria Portugal Serbia All the stored channels will be disappear after auto tuning . After auto tuning , the channel will skip to the first DTV channel. OK This screen only appear when the TV first time turn on or reset to factory set.You can choose language and country, auto turning programs . And after turning the screen will skip to the first DTV program. 2).DTV Manual tuning: You can select a DTV channel then find the program in this channel. Pls press to select the channel , then press OK to search the programs . 1.CHANNEL MENU NOTE: Bad Normal Good means signal intensity. The first item of the MENU is channel menu( for TV or DTV source only). DTV Manual Tuning Auto Tuning CHANNEL VHF CH DTV Manual Tuning ATV Manual Tuning Programme Edit Signal Information CI Information Software Update(OAD)Off Software Update(USB) Press OK to search Bad You can search channels and edit programs here. 1).Auto tuning: Search all the channels automatically(you can select ATV and DTV) Tune Type DTV+ATV Nomal Good 3). ATV Manual tuning : You can change the sound system to search the analog TV channels and fine tune the channels , then storage the channels you selected. ATV Manual Tuning Germany Italy Norway Greece Luxembourg Poland Hungary Netherlands Portugal Storage To 1 System BG MENU Current CH 1 Search Pls press to select country at first , then press OK button to start auto tuning . Fine-Tune Frequency 255.25 MHz Save -11- MENU OPERATION NOTE: Picture Mode Energy Saving Press teletext red button to storage to channels after manual tuning . Color Temperature Aspect Ratio 4). Program edit: You can Delete ,Rename ,Move, Skip , FAV any programs. Delete Noise Reduction Screen PICTURE Picture Mode Energy Saving Press teletext red button , the program in cursor will delete. Color Temperature Contrast 50 Red 40 Brightness 50 Green 31 Color 50 Blue 50 Medium Sharpness 50 Rename: Tint 50 Only can rename ATV programs . Move the cursor to the program, press teletext green button to rename the program. Press to choose the character. Press to move the cursor . Press MENU button to exit edit , Press EXIT to exit the menu. Note: ATV programs name only can be 5 character, DTV programs name can be 25 character. MENU MENU Note: 1) If you want to adjust contrast, brightness, color, and sharpness, the picture mode must be set to personal. 2) This will increase or decrease Warm (red) and Cool (blue) colors to suit your personal preference. Select Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, Warm to give the white colors a red tint. Energy saving is the default setting, if you select some other options, the power consumption may change. This product default mode (Energy saving) already pass the Energy star test, If TV set in other mode, may increase energy consumption beyond the limits required for ENERGY STAR qualification Move the cursor to the program , press teletext yellow button , it will show yellow cursor , Press to move the program. 3.SOUND MENU The third item of the MENU is the SOUND MENU. You can adjust the sound effect here such as treble, bass, balance etc. Press to move, press OK to adjust. Press to choose the program , press teletext blue button to skip this program, The will show on the right side of the program . Choose the skipped program, press blue button again , you can cancel the skip ,The will disappear . Sound Mode Standard Balance Auto Volume SOUND Favourite Note: Auto volume: only available when the input signal volume is too large or distortion. Press to choose the program , press FAV button , it will show on the right side of the program.Choose the FAV program , press FAV button again , you can cancel the FAV, the will disappear . 4.TIME MENU The forth item of the menu is the TIME MENU You can adjust the clock, power on/off time, sleep time etc Press to move, press OK to adjust Once your favorite group is created, you can press the FAV key to quickly access your favorite channel. 5). CI information: (optional) This menu can display the CI card' s information. 2. PICTURE MENU The second item of the MENU is PICTURE MENU. You can adjust picture effect here, such as contrast, brightness, etc. Press OK to move, press OK to adjust. TIME Clock -- -- -Off Time On Time Sleep Timer Auto Sleep Time Zone -- NOTE: Within 15 minutes there is no signal, the TV will auto sleep , if Auto Sleep is set ON. The clock time can get from the DTV system auto. -12- OPERATION 5.OPTION MENU The fifth item of the MENU is the OPTION MENU. You can adjust the Menu language, Audio language,Subtitle language etc. < OPTION 7. APPLICATIONS MENU The sixth item of the MENU is the OPTION MENU. DMP OSD Language English Audio Languages Deutsch Subtitle Languages Deutsch Country Germany PVR File System Restore Factory Default < APPLICATIONS Press OK button to enter the DMP menu. In PVR File system menu you can set up USB disk for PVR. Select Disk USB 2.0 C: Check PVR File System Start USB Disk Format Time Shift Size Speed PHOTO MUSIC MOVIE TEXT Free Record Limit 6 Hr. Please make sure that the USB device have plugged in the slot.There are four type media item can be selected, such as photo, music, Movie, and text. Select the type media item by pressing , press OK button to enter the disk selection menu. NOTE: Restore factory default will clear all the programs and password. 6.LOCK MENU The sixth item of the menu is the LOCK MENU You can lock system, set password, block program and set parental guidance Once you set the lock system on you can not search the channels or change any programs. 1/1 Lock System Set Password Block Program LOCK Parental Guidance Off Return Press the to select the right disk and press OK to display media files and folder list or choose Return to back to the media type selection menu. NOTE: The default pass word is 6666. Block program: Press to choose the program ,press teletext green button to block the program. If you want unblock the program, pls enter the main menu , input the password, then press green button again.Parental guidance: Press to choose 4~18 years. 1/1 Resolution: 688x412 AudioTrack: 1/2 Subtitle: 1/3 Program: 1/5 Size: 511457 KBytes Return Movies Sample1.ts Sample1.ts -13- Sample2.ts Sample3.ts Sample4.ts OPERATION Select the media file by pressing or , then the preview frame will pop up.Press the button to play the media file in full screen.When the media file (photo,music, Movie, or text type) is playing, press the OK or Info button can display the control bar. INFO 1. Use to choose the programs , Press INFO key, you can display the highlight program's information. 00:00:33/00:04:22 Pause FB FF Prev. Next Stop Repeat ALL Info. Press to select the function icon, press OK button to confirm the function. Press or EXIT button to exit the control bar. NOTE: You can adjust the audio track, subtitle, or program in the Info menu while Playing the video file.Choose the Info icon and press OK can display the Info MENU. Schedule List Time Sample1.ts Date 04:55 28th Apr Programme Title Delete Channel Name 3. Record Press the red key ,It can set the program to be recorded. Resolution: 720x576 AudioTrack: 1/2 Subtitle: Remind 4. Press the blue key to choose one program and set up one reminder time, the TV screen will skip to the choosed program in the reminder time automatically. 1/3 Program: 1/6 Size: Schedule 2. Press the teletext yellow key, It can list all the reminder schedule, press to choose the list, press red key DELETE to delete the schedule list, Press EPG to return to EPG menu. 30574 KBytes Close Reminder setting 802 SZTVM03 08 Minute 05 Hour 8.EPG Menu(Electronic Program Guide). Apr Month 28 Date Once Mode The EPG menu is used to look at what is being broadcasted on DTV or Radio channel in the day. To access the EPG menu, press the EPG botton,the following menu will be displayed: PROGRAMME GUIDE OK TIME 28 Apr 04:39 800 SZTVM01 No Information 801 SZTVM02 No Information 802 SZTVM03 No Information 803 SZTVM04 No Information 804 Date No Information Record OK INFO Schedule Remind INDEX -14- BACK TROUBLE SHOOTING Trouble phenomenon Symptom Inspection Check Picture Audio Snow Noise antenna position, direction or connection Ghost Normal audio antenna position, direction or connection Interference Noise electronic equipment,car/ motorcycle,fluorescent light Mute Volume(check if mute is activated or if the audio system connections are not correct) Normal Picture Power cord is not inserted Power switch is not opened Contrast and brightness/volume setup Press standby key on the remote control for inspecting No picture Mute No colour Normal audio Colour control Picture breaking up Normal audio or weak retune channel No colour Noise TVsystem The LED TV panel is built with very high precision technology giving you fine picture details in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, black or white. Please note this does not affect the performance of the product. -15- LED TV
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : Administrator Title : 说明书MUAV6550Y-34580 Create Date : 2017:04:19 17:42:17+08:00 Creator Tool : CorelDRAW Modify Date : 2017:05:04 16:56:05+08:00 Metadata Date : 2017:05:04 16:56:05+08:00 Producer : Corel PDF Engine Version 14.0.0.701 Document ID : uuid:80d8385b-7527-47cc-a9b8-cbdba2eccbfa Instance ID : uuid:18bd2ef9-d7d3-4552-b6cb-67585e7ab512 Page Count : 18 Author : AdministratorEXIF Metadata provided by EXIF.tools