Shen Zhen Zorlik Electronic Technology HGA760 WiFi BroadBand Router User Manual pt 1
Shen Zhen Zorlik Electronic Technology Co., Ltd. WiFi BroadBand Router pt 1
Contents
- 1. User Manual pt 1
- 2. User Manual pt 2
User Manual pt 1
Quick Installation Guide
for
WiFi Broadband Router
Quick Installation Guide
2
Conventions
Thank you for purchasing WiFi broadband router.
Applicable to WiFi broadband router, this Installation Guide provides a WebUI-based
configuration method and procedure. In this guide, Windows 2000/XP is used as an example.
Items list
Please check for the following items in the packing box:
300 Mbps wireless router × 1
Power adapter × 1
Quick Installation Guide × 1
Warranty Card × 1
Appearance
（Note: the number of antenna will be subject to the actual model）
Interfaces
Quick Installation Guide
3
Interface
Function
DC IN
DC input, connecting to a 12V/1A power adapter
RESET
Reset key. Pressing this key for 5 seconds will restore the router to factory
settings.
WAN
RJ45 port for connecting to an internet access device such as ADSL
modem, upper level router or switch. A static IP address, dynamic IP
address, or PPPoE can be used for internet access.
LAN
LAN port, connecting to a terminal device with an RJ45 port such as a
computer
USB
USB port, connecting to a 3G usb dongle or USB mass storage (of special
models)
LED indicators
Indicator
Meaning
State
Description
Power
Always on
System started up and in working state
Off
Not working
WiFi
Always on
Wireless function is enabled.
Flashing
Data is being received or sent via WLAN.
Off
Wireless function is not enabled
RJ-45
Always on
An Ethernet cable is connected to the LAN
port properly.
Flashing
Data is being received or sent through the
RJ-45 port.
WAN
Always on
WAN port is connected to ethernet equipment
properly.
Flashing
WAN port is receiving or sending data.
System indication
①Always on: A storage device is successfully loaded.
②Off: A storage device is not loaded.
Installation environment
Quick Installation Guide
4
To ensure proper functioning of the router, the operating environment is recommended as
follows:
a) Keep away from heat, maintain ventilation
b) Lay equipments on flat surface
c) Lay equipments in dry environment without dust
d) Dismantle power supply and all wirings in thunderstorm weather in case of lightning
stroke
Note: please supply rated power for equipments. If unmatched power is supplied, router may
get damaged.
Storage condition
Temperature
Humidity
Working status:
0-50℃
10-85% (non-condensation)
Store status:
-20-70℃
5-90% (non-condensation)
System requirement
Broadband Internet service (Ethernet cable access or through xDSL/Cable Modem)
Modulator-demodulator with RJ45 port (unnecessary for ethernet cable connection)
Each PC is equipped with network connection equipment respectively (wireless network
card or wire network card and network cable)
Windows 98, Me, NT, 2000, XP, Vista, 7 and other operating systems supporting TCP/IP
protocol
Internet Explorer 6.0 or higher version
Product installation
1. Hardware connection
Please use ancillary power adapter to supply power for router, start router, and then
connect your computer to the RJ45 port on the router by using a RJ45 network cable.
Prompt: you can connect wireless broadband router via wireless interface. When
configuring router for the first time, we recommend you to connect with wire method. The
following setting steps are all based on wire connection.
2. Set up your computer network in a correct way
The router default LAN port’s IP address as 192.168.169.1 and default subnet mask as
255.255.255.0. These values can be modified according to actual condition. The text will
explain it with default value.
1) Double click “My Network Place” on desktop, and click “View network connections”
on dialog box, and select “Local Area Connection” of corresponding network card on this page.
Quick Installation Guide
5
2) Double click “Local Area Connection”, select “Internet Protocol (TCP/IP)” indialog
box popped out, and then click “Properties”, as the following picture:
3) In “Internet Protocol (TCP/IP) Property” screen popped out, select “obtain an IP
addresses automatically” and “obtain DNS server address automatically”, click “OK”
Quick Installation Guide
6
3. Log on router configuration page
1) Open IE browser, input at address bar: 192.168.169.1, Enter.
2) In log-in window popped out, input user name: admin; password: admin; then click
"OK”.
Prompt: both user name and password of initial administrator are: admin; user can
Quick Installation Guide
7
change administrator’s password after entering into the system.
3) After inputting correct user name and password, one can enter into router’s WEB
configuration screen.
4. Select way to access the Internet
Router supports four wan accesses of static IP, dynamic IP, PPPoE and WiFi repeat. Click
corresponding icon at bottom column on home page and select your access method. Router was
set into DHCP (dynamic IP) mode as the way to access the Internet when leaving factory.
Select a static IP (fixed IP)
If access way provided by network provider for you is static IP, you shall input ISP or IP
address, subnet mask, gateway, DNS server and standby DNS server provided by network
administrator for you.
Select DHCP (Auto config)
Quick Installation Guide
8
If access way provided by network provider for you is dynamic IP, Please click on the
icon“ DHCP (Auto config)” , next you don’t need to input anything, click “OK” directly.
Select PPPoE (ADSL)
If your way to access the Internet is “ADSL dial-up”, you only need to input account
information provided by ISP in input box of “user name” and "command”, complete setting, and
click “OK”.
Select WiFi repeate
If you want to make current router connect to another exist wireless router though wireless
connection, please select this mode.
Enter into “WiFi repeate” setting interface, click "scan all AP”, It will list names of
surrounding WiFi routers, select the router you need to connect, input password for connection,
click “OK” and complete setting
5. Wireless network setting
Complete setting internet access method and configure security setting of wireless network to
prevent illegal user access. Click “Wifi security settings” on home page and appear the following
Quick Installation Guide
9
UI:
After basic setting of router is completed, you can click “advanced setup” icon on home
page to check partial connection status of router with ISP. If your router’s “Internet
Configuration” shows that corresponding IP address, DNS servers and other information are
obtained successfully, you can surf on internet now.
If you need higher function set, please make further setting in menu bar on the left.
Shen Zhen Zorlik Electronic Technology Co., Ltd.
ADD: 5 Floor, Bldg 8, Dongwu Industrial Zone, Donghuan 1st Road, Longhua, Longhua
New District, Shenzhen, Guangdong, China.