ShenZhen Aomais Technology T1 TWS User Manual Web
ShenZhen Aomais Technology Co., Ltd. TWS Web
User Manual
Email: vksupport@126.com
7
User Manual
Wireless Bluetooth Earbuds
01
Thank you for choosing T1Wireless Headset. Please read this User Manual
carefully and save it for future reference. If you have any questions,
please contact us.Email: vksupport@126.com
Charging Box's lid
Wireless Headset
Capacity Indicator Light
USB Port
Charging Box
01 Wireless earbuds
02
Charging contacts
Earplug
Earphone Indicator Light
Multi-Function Button
microphone
Earflap
①
①
②
②
③
③
④
④
①
①
②
②
③
③
④
④
⑤
⑤
⑥
⑥
Product Overview
Specifications
Product name:
Bluetooth version:
Transmission range:
play time:
Stand-by Time:
Battery capacity of earbuds:
Battery Capacity of Charging Box:
Weight of earbuds:
Charging Box & earbuds:
WTS
5.0
5 hours
about 55 hours
Left: 6.25g; Right: 6.25g
60g
Function Operation
Power on
Power off
Play/Pause
Wake up siri
Answer
Hang up
Refuse
Volume +
Volume -
Automatically power on by taking out of charging box.
Automatically power off by putting into the charging box.
Click the function button.
Long press the function button 1s in standby mode.
Press the function button once when calling.
Press the function button once during talking.
Long press the function button 1s when calling.
Function Operation
music journey.
How to Wear the Headset
1/ Choose the right
earplugs so as to fit
your ears.
2/ Adjust the headset
to a comfortable
position.
How to Charge the Headset
How to Pair the Headset
Advanced Operation: Unpair
25%
100%
75%
50%
How to Charge the Headset
When used for the first time, it is recommended to charge the headset before using.
Please cover the lid when charging.
When the headset is placed in the charging box,
the indicator lightwill be white.
1)Charge the charging box.
The remaining capacity of charging box is divided
into 4 levels, namely, 25%-50%-75%-100%.
2)The states of charging box when charging
the wireless headset.
constantly on.
B . When only one headphone is full, the headphone will
disconnect from the charging box, flash red and blue lights
and power off with a red light.
C . When two headphones are full, the headphone will disconnect
from the charging box, flash red and blue lights and power off with
a red light.
A . When charging the headset, the red indicator light is
earbuds will automatically power on and interconnect.
After the interconnection is successful, the left earphone
enters as the main earphone in binaural mode for pairing.
Tip: the headset will remember the device previously it
paired with. If you have paired them before, you only
need to turn on the device' s Bluetooth and the headset.
They will be automatically connected without entering
into the pairing mode again.
Note: please complete the pairing in 5 minutes,
otherwise the headset will automatically power
off so that you will need to put the headset back
to the charging box and then take it out to power
it on.
Turn on the Bluetooth function of your device. Find
“VaKo-VT1 L”in the search results. Click it and wait for the
them to pair automatically.
he
Paired d evi ces
Blueo oth
Turn o n Blu eto oth
Cell p hon e nam e
Open d etect io n
sett i ng
VaKo-VT1 L
When the headphones need to be used simultaneously for a single ear,
the following operations are needed to unpair them so as to prevent their
automatic interconnection.
Put the headset into the charging box; press the headset to enter into the
the bluetooth search status.
1. Take the earphones out of the charging box; and the headset will automatically
power on and enter into the state of the red and blue lights alternately flashing.
2. Simultaneously press and hold on the function button until the blue light flashes
the pairing automatically.
4. Complete the pairing with your phone according to the method described above.
Pairing of headpones(After unpairing)
Q&A
Q: Why can't I hear the other when l'm on the phone, or listening to music?
A: Please confirm the following points:
answer it.
Q: Why can't the headset pair with my device?
A: Please confirm the following points:
please disconnect and close the Bluetooth of that device.
service.
Notes:
can result in severe consequenc es such as suffocation.
capacity and shorten its service life.
Please listen to music or make phone calls at the lowest volume.
away.
may explode in case of damages.
battery as household garbage or throw it into the fire so as to avoid any explosions.
Warranty
Manual.
Q: Why can't my headset be charged?
A: Please cover the charging box's lid and keep the charging contact clean.
Q: Why can't my headset be powered on?
A: Please recharge it and make sure the headset has enough power. Put the
headset into the charging box to check if the indicator light is constantly red.
Q: Why can't the two headphones be paired with each other?
A: Put the two headphones back into the charging box for 5 minutes to reset, and
then retake them out of the charging box and pair them according to the method for
first use.
Q: The wireless headset's signal is not good?
A: Bluetooth is a short-range wireless communication technology. When we say that
it has a transmission range of 10 meters, such range does not include all kinds of
environment and special circumstances. Please check whether there is any
electromagnetic interference around.
Us
Wireles
Press twice the function button to increase the volume.
Press three times the function button to reduce the
volume.
FCC ID: 2ANMAT1
Model Name: T1
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.