ShenZhen Aoni Electronic Industry BTEARBUDS Bluetooth Earbuds User Manual 940 2 28

Download:
Mirror Download [FCC.gov]
Document ID	2577259
Application ID	6rxXVvjl6DUe3+n6bsceKA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.29kB (153609 bits)
Date Submitted	2015-04-07 00:00:00
Date Available	2015-04-07 00:00:00
Creation Date	2015-04-01 09:40:45
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-04-01 09:40:45
Document Title	Microsoft Word - 940 User Manual 2.28
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

aoni 940 Bluetooth Earbuds User Manual
Ⅰ.Introduction
Thank you for purchasing the aoni 940 Bluetooth Earbuds; we encourage you to read this quick installation guide
thoroughly to get the most of this innovative wireless headset.
Main features
z Enjoy hands free conversations and a clear signal reception up to 10 meters away from your computer or audio
source.
z Compatible with other Bluetooth enabled devices, such as CD, DVD and MP3/4 players, desktop or laptop computers,
smart phones, PDAs and iPods.
z Ideal for PC interactive game, internet voice chats and conferencing.
z Wide adjustable headband and leatherette ear pads provide comfortable listening for hours on end.
z Noise cancelling microphone for clear voice chats
z Li‐polymer rechargeable battery
Ⅱ. Product components
1.
2.
3.
4.
Volume up/ Next track
Power ON/OFF(press the button down for long time)/play/pause button.
Volume down/ Previous track
Cable adjuster
Ⅲ‐Basic Operation
Charge your headset
z Use the supplied USB cable to charge the battery directly from your PC.
z Make sure that your aoni 940 Bluetooth Earbuds is fully charged before using it for the first time.
z The headset battery has to be initially charged for at least for 2 hours.
z While charging, the LED is solid red. When the battery has reached full capacity, the LED will in blue.
Turing your headset on and off
1. Press and hold the power button for 3 seconds to turn on the headset. You can hear “POWER ON” from the headset.
2. To power off the device, press and hold the power button again for 3 seconds. You can hear “POWER OFF” from the
headset
IV‐Advanced operation
Note: Before installing this product, please make sure your computer or laptop has the available built‐in Bluetooth feature.
If your computer is not Bluetooth‐enabled, you must purchase a Bluetooth dongle, preferably version 2.1 or above.
a. Pairing the headset with your laptop
1. Make sure the headset is off.
2. Activate the bluetooth program in your laptop to begin setup.
3. The “Search new device” screen will be displayed.
4. Place both devices not more than one meter away from each other.
5. Press the power button on the headset for about 5 seconds, you can hear "PAIRING" from the headset. When the blue
and red LED will blink alternately, it indicates that the headset has entered pairing mode.
6. You will find the product name aoni 940 Bluetooth Earbuds occurs on your laptop, press “pairing”. Then you can hear
“YOU PHONE IS CONNECTED” from the headset.
7. If the pairing is successful, the blue LED will blink twice of each 5seconds.
b. Pairing the headset with your phone
1. Make sure the headset is off.
2. Set your bluetooth phone to “discover” the wireless headset.
3. Place both devices not more than one meter away from each other.
4. Press the power button on the headset for about 5 seconds, you can hear "PAIRING" from the headset. When the blue
and red LED will blink alternately, it indicates that the headset has entered pairing mode.
5. You will find the product name aoni 940 Bluetooth Earbuds occurs on your laptop, press “pairing”. Then you can hear
“YOU PHONE IS CONNECTED” from the headset.
6. If the pairing is successful, the blue LED will blink twice of each 5seconds.
Please note: If your laptop/phone device is under version 2.1, please enter the passkey =”0000”(4 zero)
When the headset is disconnected, you can hear “YOU PHONE IS DISCONNECT” from the headset.
When the Bluetooth headset is beyond the connected distance, there will be “DU DU” tone. The headset will
be auto‐connected again when it within the connected distance.
Using the Bluetooth® wireless headset.
1. Answering and ending a call using your mobile phone.
z When there is an incoming call, the headset will ring.
z Briefly press the power button to answer an incoming call. You may also press the answer button on your cell
phone to receive the call in your headset.
z To end a call, simply tap the power button once again. Likewise, you may also end the call directly using your cell
phone.
z To reject the incoming call, press the power button for 2 seconds.
z Double‐click the power button can redial the last call
2. Initiating /answering and ending a call on VOIP
z To make a call, simply dial the number by using your internet calling application.
z When there is an incoming call, press the power button briefly. Music playback pauses temporarily.
z To end a call, simply tap the power button once again.
3. Music play back.
z Adjust volume controls for a comfortable listening Level.
z Long press the volume up buttons to play the next track.
z Long press the volume down buttons to play the previous track. Or it may be back to the start of the currently
playing song, then press the volume down buttons again, it will play the previous track. Different performance
depends on the different smart device.
z Short press the volume up buttons to increase the volume.
z Short press the volume down buttons to down the volume.
z Short press the power button music will be paused, press again will play
z When listening to music using your mobile phone, playback will resume automatically once the call is ended.
4. SIRI function
When the headset is in pairing mode, press the volume up and volume down for a short time at same time, cell phone
will in SIRI mode. Such as IPhone. To quit the SIRI press the volume up and volume down for a short time at same time
again.
5. Low battery warning
When the battery capacity is below 10%, you can hear warning tone from the bluetooth headset one time each one
minute. Then the red LED blink 3 times each 2 seconds. Until the battery is below the 3.2V, the bluetooth headset will
power off automatically.
Specifications
Mic.Spec.:
z Microphone Unit : ￠4*1.5mm
z Directivity: omnidirectional
z S.P.L:‐42±3db
z Impedance:≤2.2KΩ
z Frequency response:100Hz‐10,000Hz
z Operating Voltage:2V
Speaker Spec.
z Speaker diameter: ￠6mm
z Impedance:16Ω
z S.P.L:93±3dB S.P.L at 1KHZ
z Rated capability:2mW
z Frequency response:20Hz‐20,000Hz
POWER
Battery type
Charging connector type
Battery charging spec.
Run time
Standby time
Charging time
Operating temperature
Storage temperature
Built‐in 3.7V/80mAh lithium‐polymer rechargeable battery
Micro USB 5V/0.5~1A plug
DC4.2V/60mA
UP to 4 hours of talk or music playback time
Up to 120 hours
Approximately 2 hours
‐10℃‐50℃
‐40℃‐80℃
Precautions
Do not drop, hit or shake the device.
Do not disassemble, repair or modify the headset by yourself.
Do not use cleaning products that contain benzene, solvents or alcohol.
Do not expose headset to excessive heat or direct sunlight for long periods of time.
Do not store the device in a place with high humidity or dust.
Do not place heavy objects on top of the headset.
Do not use near a microwave oven or wireless LAN products.
Warning
Adjust headset sounds to the proper volume, loud sound may damage your ears. In the circumstance that will cause
dangerous, please don’t use the headset. When you wear headset, please take care of “L” and “R”.
Caution:
We will no longer guarantee the performance or warranty if the user attempts to dismantle and modify this product in
anyway.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement：
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: 1. This device may not cause harmful interference, and 2. This device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:04:01 09:40:45+08:00
Create Date                     : 2015:04:01 09:40:45+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 940 User Manual 2.28
Creator                         : Administrator
Document ID                     : uuid:4d268255-93b2-4fe7-bc52-d5be6ae01316
Instance ID                     : uuid:057bd91b-8ea0-4eec-b2cf-35b93cdf00f0
Page Count                      : 4
Author                          : Administrator

EXIF Metadata provided by EXIF.tools