ShenZhen Aoni Electronic Industry D7B032 Bluetooth Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3429059
Application ID	dCsn21jQwyWiw1ooMhrNUg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.36kB (392033 bits)
Date Submitted	2017-06-16 00:00:00
Date Available	2017-06-16 00:00:00
Creation Date	2017-06-03 09:39:12
Producing Software	Microsoft? Office Word 2007
Document Lastmod	2017-06-16 00:21:25
Document Title	User Manual
Document Creator	Microsoft? Office Word 2007
Document Author:	zhengl

User’s Manual
Model No: B032
Wireless Headphone With
Microphone
Important safety instruction
If used in the correct method, this design and production of this product can ensure your personal safety
completely. However, any inappropriate use may lead to potential risk and danger of electric shock or fire
hazard. Please read all the safety instructions before installing and using the product. In particular, attention
shall be given to the following information:
1. It needs to be stored or used in the ambient temperature.
2. It shall not be placed in water or wet locations.
3. It can’t be disposed randomly for it may cause environmental pollution.
4. Without approval, It shall not be disassembled or repaired.
5. The built-in lithium battery can’t be disposed in the fire or other places to prevent causing fire hazards.
6. It shall be cleaned with dry cloth.
7. Whenever there is damage, it needs to be repaired by professional personnel.
Charging the battery
Fully charge the battery for about 2 hours before using the battery for the first time.
1. Plug the smaller end of USB charging cable into the Micro-USB interface of the connector.
2. Next, plug the other end of USB charging cable into other power charging devices or a computer with the
power on.
Status
LED indicator
Low battery
Red LED light flash once per 1s, 3.3V alarm, 3.0V shutdown
Charging
The red light solid on.
Fully charged
The red indicator will go out .
Package content
1. Wireless headphone
2. Micro USB charging cable
3. 3.5mm audio cable
4. User manual
Earphone indicator
Product feature
Pairing name
Li-battery capability
Talking time
Playing time
Standby time
Charging time
Charger mode
Straight-line distance
It is necessary to enter the passcode
if bluetooth connection version 2.0
below
Function
Power on
B032
500 mAh
20hours
20hours
3 months
2 hours
Micro USB 5V/1A
A single earphone bluetooth distance will be more than 10
meters indoor , outdoor more than 7 meters.
0000
B021 bluetooth earphone instructions
Key operation
Long press button"
"about 2
LED status
standby (Reconnection): blue
LED light flash once per 1s
seconds
Power off
Long press button"
"about 4
seconds, when the shutdown
issued a "POWER OFF" voice
prompts
pairing
Standby state
Disconnect state
Play
Pause
Long press button"
"about 4
seconds, enters into pairing
mode, there is voice
prompts ”Ready to pair,turn on
bluetooth pin code zero zero
zero zero” . Pairing successful
has voice prompt” Pairing
complete”. If connected, voice
prompt says “connected ”.
The device turns on but
disconnected
The device turns on and
connect Bluetooth but doesn’ t
work
When Bluetooth of the device
disconnected, there is
“disconnected” voice prompt.
Blue led light flashes.
Red LED light go out after 2s
Red and blue LED slow flash 100
ms alternately
Blue led flash once per 1s
Red LED light go out after 2s
Blue led flash once per 1s
Short press button"
Blue LED light solid on
Short press button"
Blue LED light solid on
Volume up
Volume down
Next track
Previous track
Short press button"
Level )
Short press button"
Level )
Long press button"
seconds
Long press button"
seconds
"(15
"(15
" for 3
" for 3
Incoming call
Reject call
Short press button"
Long press button"
"about
2 seconds
End call
Last number redial
Blue LED light solid on
Blue LED light solid on
Blue LED light solid on
Blue LED light solid on
When the call: red LED light flash
twice per 1s
After answering: Blue LED light
solid on
After reject call blue LED light
solid on
Short press button"
After end call blue LED light solid
on
Long press button"
"about
Red LED light flash twice per 1s
"about
Blue LED light solid on
2 seconds
Sound Switch
Long press button"
2 seconds
Bluetooth pairing
In the shutdown state, long press button“
”about 5 seconds is enter into pairing mode (where The first
device and the second device can be matched), 1 minute without matching into standby, 10 minutes
connectionless automatic shutdown. When The first device matching success , there is “PAIRING
SUCCESSFULLY” voice prompt, connection successful has “ CONNECT” voice prompt, at the same time,
the “left channel” audio sound is heard in the primary headphone; the “ right channel ” audio sound is heard
in the secondary headphone. After the first device is successful connection can search with the primary
headphone matching, if paired, there is “PAIRING SUCCESSFULLY SECOND DEVICE CONNECT” voice
prompt. if connected, voice prompt says “connected ”.
Trouble shooting
Q1. Why can’t I power on the headphone?
A1.1. The earphone may have run out of the battery power. Please charge the battery using the charging
cable.
Q2. Why can’t I connect the earphone to my bluetooth device?
A2.1. The bluetooth function on your device may have been turned off. Please turn on the bluetooth
function on your device and allow it to search for compatible devices.
A2.2. The earphone may have been connected to another device.
Please disconnect (unpair) the headphone from the previous device before connecting them to a new one.
A2.3. The earphone may not have been recognized by your device.
Please turn off the headphone, turn them back on, search for the headphone on your bluetooth enabled
device, and make the connection again.
A2.4. The earphones may be too far away from your bluetooth device. Please make sure that the
headphones are close enough to your device, and there is no obstacle between them.
Q3. Why aren’t the earphones playing sound tracks in the bluetooth mode?
A3.1. The earphones may not have been selected as the output device.
Please adjust the settings on your bluetooth enabled device to use the earphones to play the sound tracks.
A3.2. The volume may have been adjusted to the minimum. Please press to increase the volume.
Q4. Why is the sound quality very poor in the bluetooth mode?
A4.1. The bluetooth connection may not be in its optimal condition. Please make sure that the earphones
are close enough to your device, and there is no obstacle between them.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in port
able exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : zhengl
Create Date                     : 2017:06:03 09:39:12+08:00
Modify Date                     : 2017:06:16 00:21:25+08:00
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : zhengl
Creator Tool                    : Microsoft? Office Word 2007
Metadata Date                   : 2017:06:16 00:21:25+08:00
Producer                        : Microsoft? Office Word 2007
Document ID                     : uuid:c074fb0b-b6dd-48d2-a25e-cc82c03e5fb6
Instance ID                     : uuid:17ab1eeb-b3b7-4724-bd60-b8d3f9f02bb0
Page Count                      : 5

EXIF Metadata provided by EXIF.tools