ShenZhen Foscam Intelligent Technology FI9821W Indoor HD Pan/Tilt Wireless IP Camera User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2028448
Application ID	UW1D84q7Yu42RyE+U5bVfw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	230.36kB (2879448 bits)
Date Submitted	2013-07-30 00:00:00
Date Available	2013-07-30 00:00:00
Creation Date	2013-07-02 02:18:16
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2013-07-02 02:18:16
Document Title	1
Document Creator	Microsoft® Office Word 2007
Document Author:	Sky123.Org

User Manual
Model: FI9821W V2
Indoor HD Pan/Tilt Wireless IP Camera
（For Windows & Mac OS）
Black
White
w
ww w.foscam .com
Table of Contents
1 Ov erv iew s .................................................................................................................................................... 2
1.1 Key Features...................................................................................................................................... 2
1.2 Read Before Use................................................................................................................................ 3
1.3 Packing Contents ............................................................................................................................... 3
1.4 Physical Description ........................................................................................................................... 3
1.5 SD Card ............................................................................................................................................. 5
2 Acc ess ing the Netw ork Ca mera ................................................................................................................... 6
2.1 Access the Camera in LAN................................................................................................................. 6
2.2 Access the Camera in WAN ............................................................................................................... 9
2.3 Using the VLC player ....................................................................................................................... 14
3 Surveillance Softw are GUI ......................................................................................................................... 17
3.1 Login Window................................................................................................................................... 18
3.2 Surveillance Window ........................................................................................................................ 20
4 Advanced Camera Settings ........................................................................................................................ 28
4.1 Device Status ................................................................................................................................... 28
4.2 Basic Settings .................................................................................................................................. 30
4.3 Netw ork............................................................................................................................................ 41
4.4 Video................................................................................................................................................ 58
4.5 Alarm................................................................................................................................................ 61
4.6 Record ............................................................................................................................................. 65
4.7 Pan/Tilt ............................................................................................................................................. 66
4.8 Path Settings.................................................................................................................................... 70
4.9 Firew all ............................................................................................................................................ 71
4.10 System ........................................................................................................................................... 71
5 Playback .................................................................................................................................................... 75
6 Phone APPs ............................................................................................................................................... 76
6.1 APP for Android cell phones ............................................................................................................. 76
6.2 APP for iPhones ............................................................................................................................... 84
7 APPENDIX ................................................................................................................................................. 92
7.1 Frequently Asked Questions............................................................................................................. 92
7.2 Default Parameters .......................................................................................................................... 97
7.3 Specifications ................................................................................................................................... 97
7.4 CE & FCC.......................................................................................................................................... 99
7.5 WARRANT Y ..................................................................................................................................... 99
8 OBTA INING TECHNICAL SUPPORT ........................................................................................................102
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
1 Overvi ew s
FOSCA M FI9831W is an integrated w ireless IP Camera w ith a color CMOS sensor enabling view ing resolution
1280*720. It combines a high quality digital video camera, w ith a pow erful w eb server, to bring clear video to
your desktop from anyw here on your local netw ork or over the Internet.
With flexible 300-degree pan and 120-degree tilt, FI9831W gives users more comprehensive control over a
monitored site. The FI9831W supports the industry-standard H.264 compression technology, drastically
reducing file sizes and conserving valuable netw ork bandw idth.
The IPCA M is based on the TCP/IP standard. There is a WEB server inside w hich could support Internet
Explore. Therefore the management and maintenance of your device is simplified by using the netw ork to
achieve the remote configuration and start-up.
The camera is designed for indoor surveillance applications such as retail stores, offices or banks. Controlling
the IPCA M and managing images are simplified by using the provided w eb interface across the netw ork
utilizing w ireless connectivity.
FOSCA M provides Phone APPs for Android and iPhone users, please search “Foscam ip cam view er” and
install it through APP Store, then you can view your camera directly as a computer.
1.1 Key Features
Standard H.264 video compression algorithm to satisfy the transmission of high definition video in narrow
bandw idth netw ork
1.0 Mega Pixel
Pan 300 degree, tilt 120 degree
Supports IE/Firefox/Google/Safari brow ser or any other standard brow sers
Supports WEP,WPA and WPA2 Encryption
Wi-Fi compliant w ith w ireless standards IEEE 802.11b/g/n
IR night vision (Range:8m)
Supports image snapshot
Supports dual-stream
Supports SD Card to 32G
Supports IR-Cut and the filter change automatically
Embedded FOSCA M DDNS(dynamic domain name service) Service
Supports tw o-w ay audio / remote view ing & record from anyw here anytime
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
Multi-level users management w ith passw ord protection
Motion detection alert via email or upload image to FTP
Supporting Third Party Domain Name Service
Providing Phone APPs for Android and iPhone users
Supports multiple netw ork protocols: HTTP /TCP /IP /UDP /FTP /DHCP /DDNS / UPNP
Providing Central Management Softw are to manage or monitor multi-cameras
1.2 Read Before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the Netw ork Camera is installed, please carefully read and follow the instructions in the Quick
Installation Guide to avoid damage due to faulty assembly and installation. This also ensures the product is
used properly as intended.
1.3 Packing Contents
● IPCA M×1
● CD×1
● Wi-Fi Antenna×1 (only available for w ireless model)
● Quick Installation Guide ×1
● DC Pow er Supply×1
● Warranty Card×1
● Mounting bracket×1(option)
● Netw ork Cable×1
1.4 Physical Description
Front Panel
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
Figure 1.1
1 Speaker: Built-in speaker
2 LENS: CMOS sensor w ith fixed focus lens.
3 Infrared LED: 11 IR LEDs
4 Microphone: Built-in microphone
5 WIFI Antenna: Wireless Antenna
Rear Panel
WPS
Figure 1.2
LAN: RJ-45/10-100 Base T
Pow er: DC 5V/2A Pow er supply
Pow er Light: If the pow er adapter w orks w ell, the light w ill turn on.
Netw ork Light: The LED w ill blink w hen pow er and netw ork cable are plugged in
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
SD card: Supports to 32G
Audio Input: This jack is used to plug an external microphone
Audio Output: This jack is used to plug an external speaker
Bottom View
There are up to three labels located at the bottom of the camera; this is an important feature of original Foscam
cameras. If your camera does not have labels as show n in Figure 1.3, it may be a clone. Cloned Foscam
cameras can not use original firmw are and are not eligible for w arranty or technical services.
Reset button
MAC address of wired connection
FOSCAM domain name
MAC address of wireless connection
S/N of FOSCAM
Figure 1.3
Reset button: Press and hold dow n the RESET BUTTON for 5 seconds. Wait for 20 seconds after released,
the IP camera w ill reboot and it w ill be reset back to factory default settings. You must pow er on the camera
before reset.
1.5 SD Card
This camera supports SD Card and the max size of SD card must be under 32G.
When you plug in the SD card during the camera w ork process, please reboot the camera again, or else the
SD Card may be cannot w ork w ell.
Go to the Settings Device Status Device Status page, you can see the SD card status.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
The default storage path of alarm record files is SD card, w hen the available size of SD card is less than 256M,
the old record files w ill be deleted automatically.
2 Acc essi n g th e Netw ork Ca me ra
This chapter explains how to access the netw ork camera through w eb brow sers and RTSP players.
2.1 Access the Camera in LAN
This camera support HTTP and HTTPS protocols, so here w ill allow you to use HTTP and HTTPS port no.
(1) Http:// LAN IP + Http Port no.
Double click the IP Camera Tool icon and it should find the camera’s IP address automatically after you plug in
the netw ork cable.
Figure 2.1
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
Double click the IP address of the camera; your default brow ser w ill open to the camera login page.
Https:// LAN IP + Https Port no.
The default Https port no. is 443. You can use the url to access the camera: https:// LAN IP + HTTPS port.
Go to Settings - Network - Port panel , you can see and change the https port no.
Figure 2.2
Sometimes you need to add the url to the Trusted Sites,
Open Internet Explorer if it is not already opened. Click on Tools, then click Internet Options.
Next, click the Security tab, then click the Trusted sites button.Finally ,click the Confirm button。
Figure 2.3
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
For Firefox, you can add the trusted as the follow ing w ay:
Tools --- Options ---- Advanced --- View Certificates --- Servers
Figure 2.4
Click View Certificates, and go to Servers option.
Figure 2.5
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
Go to Add Exception panel.
Enter the camera’s url , here
take https://192.168.8.129:443
for example
Click this button to add it
Figure 2.6
2.2 Access the Camera in WAN
2.2.1 Static IP Addresses
Users who have static IP addresses do not need to set DDNS service settings for remote access.
When you have finished connecting the camera using the LAN IP address and port forwarding,
you can access the camera directly from the Internet using the WAN IP address and port
number.
How to Obtain the WAN IP address from a public website
To obtain your WAN IP address, enter the following URL in your browser:
http://www.whatismyip.com.The webpage at this address will show you the current WAN IP.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
w
ww w.foscam .com
Figure 2.7
Access your IP Camera from the Internet
You can access the IP Camera from the Internet (remote access). Enter the WAN IP address
and port number in your standard browser. For example, you would enter http://
183.37.28.254:85
No te
Make sure port forwarding is successful. You can do port forwarding two ways.
1) Login to your router to enable the “UPNP” function. You can then login to the camera as
administrator, choose Network, and then choose UPnP to enable UPnP. Make sure that the
status of UPnP reads “UPnP Successful” on the Device Status page.
2) Do port (HTTP port and Media port) forwarding manually. (See Figure 2.11 for further details)
If your router has a Virtual Server, it can do port forwarding. Add the camera’s LAN IP and port
which you had set earlier to your router’s port forwarding settings.
Note: If you plug the camera into a router, it will have a dynamic IP address and you need to set
DDNS service settings to view it remotely.
2.2.2 Dynamic IP Addresses
DDNS is a service that allow s your IP Camera, especially w hen assigned w ith a dynamic IP address, to have a
fixed host and domain name. This means that even though your WAN IP address is constantly changing, you
w ill have a fixed hostname you can use to access your cameras at all times. You can access the camera
directly from the Internet using the hostname and port number.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
10
10
w
ww w.foscam .com
What is the HTTP Port no.?
Default HTTP Port is 88
All cameras have the default HTTP port of 88. For example, if the LAN IP link of the camera is
http://192.168.8.102:88, this means that the camera’s HTTP port is 88. You can change port 88 to another port
if you’d like such as 2000 or 8090, w hich w ill not be conflict w ith other existing ports like 25, 21,10000.Here you
can set the port no. betw een 1 and 65535.
Change the default http no.88 to another one.
How to assign a different HTTP Port No. and fixed the LAN IP of the camera by the IP Camera Tool？
Step 1: Open the IP Camera Tool, select the camera you w ould like to change the port of, right click on the IP
address, and click on ”Netw ork Configuration”, this brings up the netw ork configuration box as show n in Figure
2.8 and 2.9.
Select which camera
you’d like to change the
port for, and right click
Figure 2.8
Modify the Http Port.
Enter the Username and
password, click OK.
Figure 2.9
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
11
11
w
ww w.foscam .com
Step 2: Enter the username and passw ord of the Administrator (default username is admin w ith a blank
passw ord), and click “OK” to apply changes.
Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it
w as changed to 2000, so w e see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is
now fixed at a static IP address of http://192.168.8.102:2000. This IP address w ill not change even if the
camera is pow ered off and back on, the camera w ill remain on this LAN IP address. This is very important that
a static LAN IP address is set, or you may have problems later w ith remote access and seeing the camera
remotely if the camera loses pow er and reconnects on a different LAN IP address. Make sure you s et a static
LAN IP address!
Figure 2.10
What is Port forwarding?
If you have never done port forw arding before, you can open and view the follow ing link to understand the
basic concept. Port forw arding allow s for outside connections to access a specific device on your netw ork from
anyw here in the w orld. Every router automatically blocks any incoming connections for safety purposes. Using
port forw arding, you are telling your router to allow a connection through a certain port (you can think of it as a
gatew ay) into your router. You set this port to a specific device, in our case an IP Camera, so it can be
accessed from anyw here in the w orld.
Click this link to learn more about port forw arding: http://portforw ard.com/help/portforw arding.htm
How do we configure Port Forwarding?
For this section, w e w ill be using an example:
Let’s say the camera’s LAN IP address is http://192.168.8.100:2000
Step 1: Login to the router, and go to your router’s port forw arding or port triggering menu. Sometimes this is
also under the name of Virtual Server or NAT.
Using the Linksys brand router as an example, w e w ould log into the router, and go to the Applications &
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
12
12
w
ww w.foscam .com
Gaming menu. We w ould then click on the “Single Port Forw arding” sub-menu.
Step 2: Create a new column using the LAN IP address & HTTP Port of the camera w ithin the router as show n
below, then push OK or Submit to save your settings:
Fill the HTTP Port of the
camera in the columns of
Ex ternal Port and Internal
Port. Example : 2000
Fill in this section with the
LAN IP of the came ra; we
would ente r “100” for our
example.
Assign a name for the
port forward setting here
Figure 2.11
First method :
Use the embedded DDNS to access the camera via the Internet
Each Foscam camera has an embedded unique DDNS domain name, the format of this domain name is
xxxxxx.myfoscam.org. On the bottom of the camera, you can see the domain na me sticker w ith this
information on it.
For example, w e can use test09.myfoscam.org. In the camera, click Settings at the top, click “Netw ork” on the
left, then click “DDNS” to get to the DDNS settings page. Here you can see the unique domain name of your
camera.
Figure 2.12
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
13
13
w
ww w.foscam .com
Now you can use “http://Domain name + HTTP Port” to access the camera via the Internet.
Take hostname test09.myfoscam.org and HTTP Port of 2000 for example, the URL link to access the camera
via the Internet w ould be http:// test09.myfoscam.org:2000.
Second method :
Use the Third party DDNS to access the camera via the Internet
Step 1
Please go to the third party DDNS w ebsite(such as www.no-ip.com) to create a free hostname.
Step 2
DO DDNS Service Settings w ithin the Camera
Please set DDNS Settings w ithin the camera by hostname, a user name and passw ord you’ve got from
www.no-ip.com
Take hostname ycxgw p.no-ip.info, user name foscam, passw ord foscam2012 for example.
Firstly, goes to option of DDNS Settings on the administrator panel.
Secondly, select No-Ip as a server.
Thirdly, fill foscam as DDNS user, fill passw ord foscam2012 as DDNS passw ord, fill ycxgw p.no-ip.info as
DDNS domain and server URL, Then click save to make effect. The camera w ill restart and to take the DDNS
settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the administrator panel, and
check if the DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and passw ord, and try to
redo the settings.
No te
If you have set Third Party DDNS successfully ,the Foscam Domain Name w ill be invalid. The Third Party
DDNS and the Foscam Domain Name cannot w ork at the same time, the last time you configured w ill take
effect.
2.3 Using the VLC player
This camera supports RTSP streaming, here you can view the camera using VLC player.
RTSP URL
rtsp:// [user name][:password]@IP:HTTP port number/videosream
The part in the square brackets may be omitted.
user name & password:
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
14
14
w
ww w.foscam .com
The user name and password to access the camera. This part can be omitted.
IP:
WAN or LAN IP address.
Videostream:
Here support three mode: videoMain, videoSub and audio. When the network speed is bad, here
you had better select videoSub. If you select audio, you can only hear the sound but cannot see
the video.
For example:
IP: 192.168.1.11
HTTP Port number: 88
User name: admin
Password:
123
Here I can enter one of the following URLs in the VLC.
1)
2)
3)
4)
rtsp://admin:123@192.168.1.11:88/videoMain
rtsp:// @192.168.1.11:88/videoMain
rtsp://:123@192.168.1.11:88/videoMain
rtsp://admin@192.168.1.11:88/videoMain
Open the VLC, and go to MediaOpen Network Stream option, then enter the URL into VLC.
Figure 2.13
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
15
15
w
ww w.foscam .com
Figure 2.14
Sometimes you may need to enter the user name and password again. Click OK and you can
see the real-time preview.
Figure 2.15
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
16
16
w
ww w.foscam .com
Figure 2.16
If you cannot play the video in the VLC player, please check the port mapping. You can read
Quick Installation Guide about How to configure port forwarding.
NOTE:
If you modify the camera’s username or password, you had better reboot the camera, or else the
new username and password cannot take effect when you enter the authentication in the VLC.
3 Surveillance Software GUI
Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick
installation, you can take time to learn the operation of the softw are.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
17
17
w
ww w.foscam .com
3.1 Login Window
Figure 3.1
Please check the login w indow above, it w as divided to 5 sections from no. 1 to 5.
Section1 Enter the User name and password
The default administrator username is admin w ith a blank passw ord, please reset the passw ord at first using
and prevent unauthorized users login the camera (read chapter 3.2.4 about how to change).
Section2 Media port
The Media port is used to transfer video stream, and the default port no. is 888, you can reset the port no.
betw een 1 ~65535 on the Settings- Netw ork Port page. The camera w ill obtain the port no. automatically,
you need not to fill it manually.
Section3 Stream
The camera supports tw o stream modes: Main stream and sub stream. If you w ant to access the camera form
LAN, here you can select Main stream. If you w ant to access the camera from Internet, here w e recommend
sub stream.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
18
18
w
ww w.foscam .com
Note: When the netw ork bandw idth is badly you’d better select Sub Stream and the video w ill be more fluency.
Section4 Select the language
You can select the language you need via click on the language dropdow n list to sw itch.
Section5 Login the camera
Click Login button and you w ill see the surveillance w indow s.
Figure 3.2
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
19
19
w
ww w.foscam .com
3.2 Surveillance Window
Figure 3.3
Section1 FOSCAM Logo/ LiveVideo / Settings/Playback buttons
FOSCA M LOGO
Path to surveillance w indow. Click this button and back to the surveillance w indow
Path to Administrator Control Panel, Click it, and it w ill lead to Administrator Control Panel and
do advanced settings.
: Click this button and back to the Playback panel to view the stored audio files stored in the
SD Card.
Section2 Multi-Device Window
The firmw are inside the camera supports up to maximum of 9 cameras being monitoring at the same ti me. You
can add other cameras in multi-device setting (read chapter 4.2.5).
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
20
20
w
ww w.foscam .com
Figure 3.4
Section3 Mode/ Stream / Mirror/ Flip buttons
Mode
1) 50HZ ---------Indoor surveillance (Region: Europe, China)
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)
Stream
The default Stream supports four modes: 0/720P/30fps/4M, 1/VGA/25fps/2M, 2/VGA/ 15fps/ 1M and 3/
VGA/10fps/200K. The format of the stream type is Stream type no. / Resolution / Maximum frame rate/ Bit
rate
1) Stream type no. : The number is used to identify the stream type.
2) 720P/ VGA
There are tw o resolutions, the bigger one is 720P, and the smaller one (VGA) is 640x480 pixels. The bigger the
resolution, the better of the image quality is. If you are accessing the camera via internet and w ant to get more
fluent video streaming, please select resolution VGA.
3) Maximum frame rate
When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the
maximum frame rate is 30 fps. You should low er frame rate w hen the bandw idth is limited. Normally, w hen the
frame rate above 15, you can achieve fluently video.
4) Bit rate
Generally speaking, the larger the bit rate is, the clearer video w ill become. But the bit rate configuration should
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
21
21
w
ww w.foscam .com
combine w ell w ith the netw ork bandw idth. When the bandw idth is very narrow, and bit rate is large, that w ill
lead to video can not play w ell.
You can reset the stream type on Settings-> Video-> Video Settings panel.
Figure 3.5
After changing, please re-login the camera and you can see the modification.
Section4
Pan/Tilt Control
1------Up control button,
3------Left control button,
5----- Up-Left control button
7----- Dow n-Left control button
2------Dow n control button,
4------Right control button,
6----- Up-Right control button
8----- Dow n-Right control button
Click this button and go to center
Section5 Cruise / Preset settings
Cruise Settings
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
22
22
w
ww w.foscam .com
The default cruise tracks have tw o types: Vertic al and Horizontal.
Vertical: The camera w ill rotate from up to dow n.
Horizontal: The camera w ill rotate from left to right.
: Start cruise.
: Stop cruise.
If you w ant to define or change the cruise trace, please go to Settings
PTZ
Preset Settings panel.
How to do cruise?
Firstly: Select one track in the track dropdow n list
Select one of these
Secondly: Click Start cruise button, the camera w ill cruise follow ing the predefined path.
Thirdly: Click stop button and finish cruising.
Preset settings
IPCA M supports 16 preset positions, w hich is considered enough for DIY home & s mall business surveillance
market
The default preset position is Topmost, Bottom most, Left most, right most, you can add other preset positions.
Add
Click this icon to save the position you need the camera to remember
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
23
23
w
ww w.foscam .com
Delete
Select one preset position and click this button to delete it.
GO Select one preset position in the preset dropdow n list and click Go to make the camera move the
preset position
How to do preset position?
Firstly, move the camera and stop at a desired place w here you w ant make preset position.
Secondly, click
button and enter a descriptive name for the preset position. The preset position cannot
contain special characters. Then click OK to save it. If you w ant to reset the preset position, click Cancel.
After that, you can move the camera and stop at another place, and set another preset position. You can do all
the 16 preset positions w ith this method.
If you w ant to see one preset position you have set, only select the preset position name from the preset
dropdow n list, and click go
button, the camera w ill go to the preset position.
Section6 IR LED Lights
Click Infra led and there are tw o modes to adjust the infrared led: Auto and Manual.
Auto: Select it and the camera w ill adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infra led manually.
Section7 Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
24
24
w
ww w.foscam .com
Section8 OSD
If you have added time and camera name in the video, you can see it in the live w indow.
Go to Settings ---Basic settings---Camera name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings ---Basic settings---Camera time panel and adjust the device time.
Go to Settings ---Video---On Screen Display panel, you can add or no add OSD.
Section9 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button
1------Play Click it to play the video of the camera
2------Stop Click it to stop the video of the camera
3------ Talk
Click the button and the icon w ill become to
, then talk to the microphone that connected
w ith PC, people around the camera can here your voice. Click the icon again and stop talking.
4------ Audio Click this icon, the icon w ill become to
you can hear the sound around the camera by the
earphone or speakers that connected w ith PC.
5----- Snapshot Click it to make snapshot and it pop-up a w indow w hich picture you snapshot, right click in
the w indow and save the picture to anyw here you w ant.
6----- Record Click the icon
and the camera start recording, you can see a green dot in the live
w indow. Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the
storage path: Go to Settings - >Record->Storage Location panel.
7------Full Screen Click it to make full-screen, or you can double click the surveillance screen to make
full-screen. Double click again and exit full-screen.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
25
25
w
ww w.foscam .com
Onscreen Mouse Control
Right click the mouse and you can adjust the screen ration, full screen and Zoom up.
Figure 3.6
Keep ration: Select it and the camera w ill adjust the size of live w indow based on the the computer monitor
automatically. Sometimes there is a black border around the video, please select Keep ration to get a better
visual quality .
Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen.
Zoom up:
First Method: Here is a convenient and fast solution to Zoom up/dow n screen by Clicking Video Screen
and adjusting Mouse pulley, or by press the CTRL key and click the mouse left button.
Second Method: Click it and the live view w ill be digital zoomed up, then click Zoom Dow n and the live view
back to original size.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
26
26
批注 [A1]:
w
ww w.foscam .com
Figure 3.7
When you select the Full Screen, then click right mouse, there is a Screen PTZ button.
Figure 3.8
Click the Screen PTZ button and put the mouse on the screen to indicate the camera move direction you
prefer, press the left mouse, the camera w ill move to the corresponding direction. Loosen the mouse and stop
moving. Press Esc button or double click right mouse and cancel the function.
NOT E: For Mac OS, the plugin cannot support Onscreen Mouse Control, so you cannot allow to use it.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
27
27
w
ww w.foscam .com
4 Advanced Camera Settings
Click the button “Settings”, goes to Administrator Control Panel to make advanced camera settings.
4.1 Device Status
Device Status contains four columns: Device Information, Device Status, Session Status and Log, it w ill show
you various information about your camera.
4.1.1 Device Information
Figure 4.1
Camera Model: The camera model no.
Camera Name: The Device Name is a unique name that you can give to your device to help you identify it.
Click Basic Settings and go to Camera name panel w here you can change your camera name. The default
device name is anonymous.
Camera ID: Display the w ired MAC address of your camera. For example Device ID is 000C5D00008, the
same MAC ID sticker is found at the bottom of the camera.
Camera Time: The system time of the device. Click Basic Settings and go to Camera time panel and adjust
the time.
System Firmware version: Display the System Firmw are version of your camera.
App Firmware version: Display the application firmw are version of your camera.
Web version: Display the w eb UI version of your camera
Plug-in version: Display the plug-in version of your camera
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
28
28
w
ww w.foscam .com
4.1.2 Device Status
On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status and so
on.
Figure 4.2
4.1.3 Session status
Session status w ill display w ho and w hich IP is visiting the camera now.
Figure 4.3
4.1.4 Log
The log record show s w ho and w hich IP address accessed or logout the camera and w hen.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
29
29
w
ww w.foscam .com
Click the page number and go to the
corresponding page to see more logs
Fill in one page number, click Go button
and go to the corresponding page
Figure 4.4
Reboot the camera and clear the log records.
4.2 Basic Settings
This section allow s you to configure your camera’s Name, Time, Mail, User account and Multi-Device.
4.2.1 Camera Name
Default alias is anonymous. You can define a name for your camera here such as apple. Click Save to save
your changes. The alias name cannot contain special characters.
Figure 4.5
4.2.2 Camera Time
This section allow s you to configure the settings of the internal system clocks for your camera.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
30
30
w
ww w.foscam .com
Figure 4.6
Time Zone: Select the time zone for your region from the dropdow n menu.
Sync with NTP server: Netw ork Time Protocol w ill synchronize your camera w ith an Internet time server.
Choose the one that is closest to your camera.
Sync with PC: Select this option to synchronize the date and time of the Netw ork Camera w ith your computer.
Manually: The administrator can enter the date and time manually. Note select the date and time for mat.
Click Save button and submit your settings.
4.2.3 Mail Settings
If you w ant the camera to send emails w hen motion has been detected, here Mail w ill need to be configured.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
31
31
w
ww w.foscam .com
Figure 4.7
1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually
set as 25. Some SMTP servers have their ow n port, such as 587 or 465, and Transport Layer Security usually
is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be
set to 465 or 25 or 587, w hich port you choose should be decided by w hich Transport Layer Security you
select.
2-----SMTP Username/ password ID account and passw ord of the sender email address
3----- Sender E-m ail Mailbox for sender must support SMTP
4----- Receiver Mailbox for receiver need not support SMTP,you can set 4 receivers
5----Save Click Save to take effect
6----Test Click Test to see if Mail has been successfully configured.
Click Test to see if Mail has been successfully configured.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
32
32
w
ww w.foscam .com
Test result
Figure 4.8
If the test success, you can see the Success behind the Test, at the same time the receivers w ill receive a test
mail.
Figure 4.9
If the test fails w ith one of the follow ing errors after clicking Test, verify that the information you entered is
correct and again select Test .
1) Cannot connect to the server
2) Netw ork Error. Please try later
3) Server Error
4) Incorrect user or passw ord
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
33
33
w
ww w.foscam .com
5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try
again
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device
4.2.4 User Accounts
Here you can create users and set privilege, visitor, operator or administrator. The default user account is
admin, w ith a blank passw ord. You can enter the users accounts of visitor 、operator and adminstrator
Manually.
Figure 4.10
How to change the password of administrator?
Firstly, select the account of administrator, then select “Change passw ord”, enter the old passw ord and the
new passw ord, lastly click modify to take effect.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
34
34
w
ww w.foscam .com
Figure 4.11
How to add account ?
Select one blank column, then enter the new user name, passw ord and privilege, last click Add to take effect.
You can see the new added account on the Account list.
Figure 4.12
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
35
35
w
ww w.foscam .com
Figure 4.13
Delete ：Select the account w hich you w ant to delete, then click Delete button to take effect.
Note: The default admin account cannot be deleted, but you can add other administrator users.
4.2.5 Multi-Camera
If you w ant to view multi-surveillance screens on one w indow, you need to login one camera, and set it as the
main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do
multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if
there is 8 cams installed.
The firmw are w ithin the camera can support a maximum of 9 devices monitoring all at the same time. This
page you can both add FOSCA M MJPEG and H.264 series cameras to the first camera and view
multi-surveillance screen on one w indow.
Add cameras in LAN
In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You
can add more cameras in the list in LAN for monitoring. The camera’s softw are supports up to 9 IP Cameras
online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, the Alias, Host and
Http Port w ill be filled in the boxes below automatically. Enter the correct username and passw ord then click
Add. Add more cameras in the same w ay.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
36
36
w
ww w.foscam .com
1 Click it, camera model, alias,
host and HTTP Port will be
filled in the following boxes
automatically
3 Click Add to take effect
Figure 4.14
2 Enter the User name and
password of the 2nd camera
Figure 4.14
Camera Model: Our Company produces tw o series cameras: MJPEG and H.264. Here w ill show you w hich
series the camera belongs to.
Figure 4.15
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
37
37
w
ww w.foscam .com
Back to Surveillance Windows, and click Four Window s option, you w ill see four cameras you added.
Figure 4.16
Figure 4.17
Add cameras in WAN
If you w ant to view all cameras via the internet(remote computer), you w ill need to add them using DDNS
domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read
How to configure DDNS settings in chapter 4.3.3)
Login to the first camera using a DDNS domain name and port.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
38
38
w
ww w.foscam .com
Use DDNS dom ain name and port to login
Figure 4.18
Make sure each camera you need
add could login with DDNS name
and port
Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS domain name,
port number. Enter user name and passw ord and then choose Add. (Figure 4.19)
Figure 4.19
1----- The camera model: MJ or H264.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
39
39
w
ww w.foscam .com
2----- The 2nd camera’s name
3----- Fill in the 2nd camera’s DDNS host not LAN IP
NOT E: The MJ series have the same HTTP Port no. and Media Port no.
4 ---- Enter the 2nd camera’s user name and passw ord
5---- Click Add button and to take effect
NOT E: Here the Host must be entered as the second camera’s DDNS domain name, not its LAN IP.
Figure 4.20
Return to video w indow. You w ill see all of the cameras accessible through the internet.
When you are aw ay from home, you can use the first camera’s DDNS domain name and port to view all the
cameras via internet.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
40
40
w
ww w.foscam .com
Figure 4.21
4. 3 N et wor k
This section w ill allow you to configure your camera’s IP, PPPoE, DDNS, Wireless Settings, UPnP and Port.
4.3.1 IP Configuration
If you w ant to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same
subnet of your router or computer.
Figure 4.22
Changing settings here is the same as using the IP Camera Tool. (Figure 4.23/4.24)
It is recommended that you use the subnet mask, gatew ay and DNS server from your locally attached PC. If
you don’t know the subnet mask, gatew ay and DNS server, you can check your computer’s local area
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
41
41
w
ww w.foscam .com
connection as follow s:
Control Panel  Network Connections Local Area Connections Choose Support  Details.
Figure 4.23
Figure 4.24
If you don’t know the DNS server, you can use the same settings as the Default Gatew ay.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
42
42
w
ww w.foscam .com
4.3.2
PPPoE
If you are using a PPPoE connection, enable it and enter the User Name and Passw ord for your PPPoE
account.
Figure 4.25
4.3.3
DDNS
FOSCA M camera has embedded a unique DDNS domain name w hen producing, and you can directly use the
domain name, you can also use the third party domain name.
FOSCAM domain name
Here take test09.m yfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you
can see the domain name.
Figure 4.26
Now you can use http:// Dom ain name + HTTP Port to access the camera via internet.
Take hostname test09.m yfoscam .org and HTTP Port no. 800 for example, the accessing link of the camera
via internet w ould be http:// test09.myfoscam.org:800
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
43
43
w
ww w.foscam .com
Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you w ant to use
Manufacturer’s DDNS again , here click this button and start Manufacturer’s DDNS Service.
Third Party Domain Name Settings
User can also use third part DDNS, such as www.no-ip.com. ,www. 3322.com
Here take www.no-ip.com for example:
① Step 1, Go to the website www.no-ip.com to create a free hostname
Firstly: Login on www.no-ip.com and click No-IP Free to register.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
44
44
w
ww w.foscam .com
Click here to register
Figure 4.27
Please register an account step by step according to instructions on www.no-ip.com
After registration, please login your email w hich used to register. You w ill receive an email from w ebsite, please
click the link to activate your ACCOUNT as indicated in email.
Secondly: Login the link with the registered username and password to create your domain name.
Figure 4.28
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
45
45
w
ww w.foscam .com
Figure 4.29
Please create the dom ain name step by step according to instructions on www.no-ip.com
Step 2, DO DDNS Service Settings within the Camera
Please set DDNS Settings w ithin the camera by hostname, a user name and password you’ve got from
www.no-ip.com
Take hostname ycxgwp.no-ip.info, user name foscam, passw ord foscam 2012 for example.
Firstly, goes to option of DDNS Settings on the administrator panel.
Secondly, select No-Ip as a server..
Thirdly, fill foscam as DDNS user, fill passw ord foscam2012 as DDNS passw ord, fill ycxgwp.no-ip.info as
DDNS domain and server URL, Then click save to make effect. The camera w ill restart and to take the DDNS
settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the administrator panel, and
check if the DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and password, and
try to redo the settings.
No te
If you have set Third Party DDNS successfully ,the Foscam Domain Name w ill be invalid. The Third Party
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
46
46
w
ww w.foscam .com
DDNS and the Foscam Domain Name cannot w ork at the same time, the last time you configured w ill take
effect.
② Do port forwarding within the router
Exam ple: The camera’s LAN IP address is http://192.168.8.100:2000 , Media port no. is 9200.
Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue
Server on some brands of router). Take Linksys brand router as an example, Login the router, and goes
to Applications & Gam ing->Single Port Forwarding.
Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera w ithin the router show ed
as below.
Assign a name
as you like here
Fill the Media Port no. of the
camera on the column of
Ex ternal Port and Inte rnal Port
Figure 4.30
③ Use domain name to access the camera via internet
After the port forw arding is finished, you can use the domain name+ http no. to access the camera via
internet. Take hostname ycxgwp.no-ip.info and http no. 2000 for example, the accessing link of the camera
via internet w ould be http:// ycxgwp.no-ip.info:2000
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
47
47
w
ww w.foscam .com
4.3.1
WiFi
Step 1: Choose “Settings” on the top of the camera interface, and go to the “Network” panel on the left side of
the screen, then click “Wireless Settings .”
Click the Scan button and the camera w ill detect all w ireless netw orks around the area. It should also display
your router in the list (Figure 4.31).
Click the Scan button
to search for wireless
networks.
Click the Page number to see other wireless
networks devices if there are more than 10.
Figure 4.31
Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your netw ork,
such as the name and the encryption, w ill be filled into the relevant fields automatically.
You w ill only need to fill in the passw ord of your netw ork. Make sure that the SSID, Encryption and the
passw ord you filled in are exactly the same for your router.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
48
48
w
ww w.foscam .com
Enter
the
password
of
your router
1 Click the SSID of your router
and the relevant information
will be filled in the fields
automatically.
Figure 4.32
Step 3: Please click on the Save button after all settings have been entered and disconnect the netw ork cable.
Never shut dow n the pow er of the camera until the IP camera is able to connect to the w ireless netw ork.
The LAN IP address w ill disappear on the w indow of IP Camera Tool w hen the camera is configuring a w ireless
connection. Wait about 1 minute, the camera should obtain a w ireless connection, and the LAN IP of the
camera w ill show again on the w indow of the IP Camera Tool. The IP address may have changed after the
camera receives a w ireless connection; w e recommend setting a static local IP address if this IP address
changes by right clicking the camera in IP Camera Tools, setting a static IP, and pushing OK (see Figure4.36).
Congratulations! You have set up the w ireless connection of the camera successfully.
No te
If you fail to make a wireless connection, please refer to your seller or contact us directly for
assistance.
WPS (Wi-Fi Protected Set-up)
Step 01) Press and hold the WPS button for two seconds.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
49
49
w
ww w.foscam .com
WPS Button
Step 02) Press the WPS button on your router within 60 seconds. The WPS button is usually
on the back or side of your router. On some routers, you may need to log in to the web interface
and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS
buttons is on your router, please refer to your router’s User Manual.
The camera will automatically create a secure wireless connection to your router. If you have
plugged in the network cable, please plug it out. The IP Camera Tool will search the camera’s
LAN IP. Make sure the PC and the camera share the same subnet.
No te
The security mode of router cannot be WEP, or else the WPS settings may be failed.
4.3.2
UPnP
Figure 4.33a
The default UPnP status is closed. You can enable UPnP, then the camera’s softw are w ill be configured for
port forw arding. Back to the “Device Status” panel, you can see the UPnP status:
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
50
50
w
ww w.foscam .com
Figure 4.33b
The camera’s softw are w ill be configured for port forw arding. There may be issues w ith your routers security
settings, and sometimes may error. We recommend you configure port forw arding manually on your router
(Figure 4.30).
4.3.3
Port
This camera supports HTTP Port and Media Port. The Media port is used to view the camera’s video stream,
HTTP Port is used to access the camera remotely. If you w ant to access the camera and view the video, the
Media Port and the HTTP Port must both be configured correctly.
HTTP port / Media port: By default, the HTTP and Media port is set to 88. Also, they can be
assigned with another port number between 1 and 65535. But make sure they canl not be
conflict with other existing ports like 25, 21.
Figure 4.34
Another way to change the HTTP port no.
Step 1: Open the IP Camera Tool, select the camera you w ould like to change the port of, right click on the IP
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
51
51
w
ww w.foscam .com
address, and click on ”Netw ork Configuration”, this brings up the netw ork configuration box as show n in Figure
4.35 and 4.36.
Select which camera
you’d like to change the
port for, and right click
Figure 4.35
Modify the Http Port.
Enter the Username and
password, click OK.
Figure 4.36
Step 2: Enter the username and passw ord of the Administrator (default username is admin w ith a blank
passw ord), and click “OK” to apply changes.
Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it
w as changed to 2000, so w e see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is
now fixed at a static IP address of http://192.168.8.102:2000. This IP address w ill not change even if the
camera is pow ered off and back on, the camera w ill remain on this LAN IP address. This is very important that
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
52
52
w
ww w.foscam .com
a static LAN IP address is set, or you may have problems later w ith remote access and seeing the camera
remotely if the camera loses pow er and reconnects on a different LAN IP address. Make sure you set a static
LAN IP address!
Note: 1 Http port and Media port must be different.
If the camera cannot be accessed, please make sure the port forw arding is succeed.
HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port.
Sometimes you need to add the url to the Trusted Sites.
Open Internet Explorer if it is not already opened. Click on Tools, then click Internet Options.
Next, click the Security tab, then click the Trusted sites button.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
53
53
w
ww w.foscam .com
Click here to add camera’s url
Click Sites then you can add the camera’s https w eb site to the internet explorer.
Enter the camera’s url
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
54
54
w
ww w.foscam .com
For Firefox, you can add the trusted as the following way:
Tools ---- Options ---- Advanced --- View Certificates --- Servers
Click View Certificates, and go to Servers option.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
55
55
w
ww w.foscam .com
Go to Add Exception panel.
Enter the camera’s url , here
take https://192.168.8.129:443
for example
Click this button to add it
RTSP function
RTSP URL rtsp:// [user name][:password]@IP:HTTP port number/videosream
The part in the square brackets may be omitted.
user name & password:
The user name and passw ord to access the camera. This part can be omitted.
IP:
WAN or LAN IP address.
Videostream :
Here support three mode: videoMain, videoSub and audio. When the netw ork speed is bad, here you had
better select videoSub. If you select audio, you can only hear the sound but cannot see the video.
For example:
IP: 192.168.1.11
HTTP Port number: 88
User name: admin
Password: 123
Here I can enter one of the follow ing URLs in the VLC.
rtsp://admin:123@192.168.1.11:88/videoMain
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
56
56
w
ww w.foscam .com
rtsp:// @192.168.1.11:88/videoMain
rtsp://:123@192.168.1.11:88/videoMain
rtsp://admin@192.168.1.11:88/videoMain
Open the VLC, and go to Media Open Netw ork Stream option, then enter the URL into VLC.
Sometimes you may need to enter the user name and passw ord again. Click OK and you can see the real-time
preview.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
57
57
w
ww w.foscam .com
If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation
Guide about How to configure port forw arding.
NOT E:
If you modify the camera’s username or passw ord, you had better reboot the camera, or else the
new username and passw ord cannot take effect w hen you enter the authentication in the VLC.
4.4 Video
This section allow s you to configure Video stream settings, On screen display and Snapshot settings.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
58
58
w
ww w.foscam .com
4.4.1 Settings
Figure 4.37
Stream type: There are four types to identify different streams you have set.
Resolution: The camera supports tw o types: 720P, VGA. The higher the resolution is, the clearer video w ill
become. But the code flux w ill become larger too, and it w ill take up more bandw idth.
Bit rate: Generally speaking, the larger the bit rate is, the clearer video w ill become. But the bit rate
configuration should combine w ell w ith the netw ork bandw idth. When the bandw idth is very narrow, and bit rate
is large, that w ill lead to video can not play w ell.
Frame rate: Note that a larger frame size takes up more bandw idth. When the video format is 50Hz, the
maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should
low er frame rate w hen the bandw idth is limited. Normally, w hen the frame rate above 15, you can achieve
fluently video.
Key Frame Interval: The time betw een last key frame and next key frame. The shorter the duration, the more
likely you w ill get a better video quality, but at the cost of higher netw ork bandw idth consumption.
4.4.2 On Screen Display
This page is used to add timestamp and device name on the video.
Figure 4.38
Display Timestamp: There are tw o options: Yes or NO. Select Yes and you can see the system date on the
video,
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
59
59
w
ww w.foscam .com
Display Camera Name: There are tw o options: Yes or NO. Select Yes and you can see the device name on
the video,
Allow On Screen Display Mask: There are tw o options: Yes or NO. Select yes and draw a mask area on the
video, the mask area w ill be black on the video.
The mask area
Figure 4.39
Click Back button and return to the OSD page, click Save to take effect.
Back to the surveillance w indow, you can see the mask area as the follow ing picture:
Figure 4.40
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
60
60
w
ww w.foscam .com
4.4.3 Snapshot Settings
On this page you can set the snapshot pictures’ image quality and the storage path.
Figure 4.41
Im age Quality: Low, Middle and High. The higher the quality, the picture w ill be clearer.
Save To: FTP or SD Card. If you have done FTP and Alarm settings, w hen alarming, the camera w ill snap
pictures to the FTP automatically. If select SD Card as the save path, make sure the camera has inserted in the
SD card.
4.5 Alarm
IP Camera supports Motion Detection Alarm, w hen the motion has been detected, it w ill send emails or
upload images to FTP.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
61
61
w
ww w.foscam .com
Figure 4.42
To enable motion detection, follow the steps below :
Step 01: Enable Motion detection
Step 02: Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the
camera w ill be more easily alarmed. Select one motion sensitivity.
Step 03:
Trigger interval--- The interval time betw een tw o motion detections. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
Step 04: Select the alarm indicator
When the motion has been detected, the alarm status will turn to Detect alarm.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
62
62
w
ww w.foscam .com
There are four alarm indicators:
A Ring
There is an embedded speaker inside the camera, so if you select Ring, w hen the motion has been detected,
the people around the camera w ill hear beep alarm sound.
B Send E-mail
If you w ant to receive alarm emails w hen motion is detected, you must select Send E-mail and set Mail
Settings first. The alarm email cannot contain the alarm picture if you have not selected Take Snapshot.
C Take Snapshot
If you select this checkbox, w hen the motion has been detected, the camera w ill snap the live view w indow as
a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in
Video->Snapshot settings panel.
If you select Send Email, at the same time the picture w ill be send to you as an attachment.
Capture interval: The interval time betw een tw o pictures.
D Record
If you select this checkbox, w hen the motion has been detected, the camera w ill record automatically and store
the record files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as
the Alarm record files storage path, please go to Record—> Storage location page to verify this settings.
The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record
page and change the alarm time settings.
Step 05: Set detect area
Click set detect area and it pop up a w indow, then you can draw the detection area. Click Back button after
settings. When something moving in the detection area, the camera w ill alarm.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
63
63
w
ww w.foscam .com
Figure 4.43
Step 06: Alarm Schedule
① Alarm anytime w hen motion is detected
Click the black button up the MON, you w ill see all time range turn red. When something moving in the
detection area at anytime, the camera w ill alarm.
Click this button and select all time range
Figure 4.44
② Specify an alarm schedule
Click the w eek day w ords, the corresponding column w ill be selected. For example, click TUE, the all column
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
64
64
w
ww w.foscam .com
of TUE turns to red, that means during Tuesday w hole day, w hen something moving in the detection area, the
camera w ill alarm.
Figure 4.45
③ Press the left mouse and drag it on the time boxes, you can select the serial area,
Figure 4.46
Step 07: Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the camera w ill a larm and
adopt the corresponding alarm indicators.
NOT E: You must set the detection area and detection schedule, or else there is no alarm anyw here and
anytime.
4.6 Record
This section w ill allow you to change the record files storage path and the record time.
4.6.1 Storage Location
On this page you can change the alarm and manually recording storage path.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
65
65
w
ww w.foscam .com
Figure 4.47
Alarm Recording Location : SD card. When the camera alarmed, it w ill store the alarm files to the SD card.
Make sure the camera has been inserted the SD card. On this page, you can see the available space of the SD
card.
Manual Recording Location: For Window s OS, the manual recording path is C:/ IPCamRecord, you can
change another one. For MAC OS, the manual recording path is: / IPCamRecord.
4.6.2 Alarm Record
This page you can change the Pre-record time and Alarm record time.
The default Pre-recorded time is 5s and the alarm record time is 30s, you can change another time, click Save
button to take effect.
4.7 Pan/Tilt
This page w ill allow you to change the pan/tilt speed and do cruise tracks settings.
4.7.1 Pan/Tilt Speed
There are five Pt speed types: very fast, fast, normal, slow and very slow ly. Select the desired PTZ speed type
and click save button .
Figure 4.48
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
66
66
w
ww w.foscam .com
4.7.2 Preset Settings
This section explains how to add/ delete/ alter one cruise track.
There are tw o default cruise tracks: Vertical and Horizontal.
Vertical: The camera w ill rotate from up to dow n
Horizontal: The camera w ill rotate form left to right.
All preset positions
Figure 4.49
Figure 4.50
Add: Add one cruise track.
Delete: Select one cruise track and delete it.
How to do add cruise tracks ?
Firstly, Click Add button and enter a descriptive name to identify the cruise track
Secondly: On the low er left of the page, you can see all preset points you have added. Select one preset point
and click Add button, you can see the preset point has been added to the cruise track on the cruise track page.
You need to add tw o or more preset points to the cruise track.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
67
67
w
ww w.foscam .com
The new added track name
Here you can see the preset
point has been added to one
track
2 Click Add button
1 Select one preset point
Figure 4.51
Thirdly: Click OK button and the cruise track w ill take effect.
You can add other cruise track as the same method.
For example: I have added three preset points to the “track 1”, that means : When I select the “track 1” on the
surveillance w indow, the camera moves as the follow ing track: upright then Right Most last dow nleft.
The cruise tracks have added
to the “track 1”
Figure 4.52
After add the cruise track, back to the surveillance w indow, click Cruise, her you can see all cruise tracks you
have added.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
68
68
w
ww w.foscam .com
There are other buttons betw een the Preset points and Cruise track, you can use these buttons to adjust the
order of preset points or add/delete one preset points in one cruise track,
Figure 4.53
Add: Select one preset points and add it to the selected cruise track.
Delete: Select one preset points you have added to one cruise track, click delete.
Move up/ down: Select one cruise track, adjust the order of preset points in one cruise track.
4.7.3 Pan/ Tilt Start Mode
Here section w ill allow you to set the stop position after the camera reboots.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
69
69
w
ww w.foscam .com
It supports three modes: No self test, Goto home position and Goto preset point.
No self test: When rebooting, the camera w ill not pan / tilt.
Goto home position: When rebooting, the camera w ill pa Providing Central Management Softw are to
manage or monitor multi-cameras n / tilt and stops at center.
Goto Preset point: Select one preset position and save it. When rebooting, the camera w ill pan/ tilt and stops
at the preset position you have set.
4.8 Path Settings
If you w ant to upload record files and images to your FTP server，you can set FTP Settings.
Figure 4.54
Figure 4.55
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
70
70
w
ww w.foscam .com
FTP server: If your FTP server is located on the LAN, you can set as Figure 3.54.
If you have an FTP server w hich you can access on the internet, you can set as Figure 3.55.
Port: Default is port 21. If changed, external FTP client program must change the server connection port
accordingly.
FTP Mode: Here supports tw o modes: PORT and PASV.
Username/password: The FTP account and passw ord.
Click Save to take effect.
Click Test to see if FTP has been successfully configured.
4.9 Firewall
This section explains how to control the access permission by checking the client PC’s IP addresses. It is
composed of the follow ing columns: Block access from these IP addresses and Only allow access from
these IP addresses..
Figure 4.56
Enable firew all, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only
those clients w hose IP addresses listed in the Only allow access from these IP addresses can access the
Netw ork Camera. If you select Block access from these IP addresses, only those clients w hose IP
addresses are in the IP list cannot access the Netw ork Camera.
Click Save to take effect.
4.10 System
In this panel, you can backup/restore your camera settings, upgrade the firmw are to the latest version, restore
the camera to default settings and reboot the device.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
71
71
w
ww w.foscam .com
4.10.1 Back up& Restore settings
Click Backup to save all the parameters you have set. These parameters w ill be stored in a bin file for future
use.
Click Brow se and select the parameters file you have stored, then click Submit to restore the restore the
parameters.
Figure 4.57
4.10.2 System upgrade
Your current firmw are version w ill be displayed on your screen. You may go to the Device Status Device
Information Page to check for the latest firmw are versions available.
Click Browse, choose the correct bin file and then click System upgrade. Make sure you have unplugged the
SD card.
Don’t shut dow n the pow er during upgrade. After upgrading, you can see the upgrade result.
Figure 4.58
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
72
72
w
ww w.foscam .com
Upgrade Firmware by IP Camera Tool
Double click the IP Camera Tool shot icon
, select the Camera IP that you w ant to upgrade the
firmw are. Then select Upgrade Firmw are and enter the username and passw ord, choose the firmw are file, and
upgrade.
Figure 4.59
Enter the User name and
password
Figure 4.60
CAUTION: If your camera w orks w ell w ith the current firmw are, w e recommend not upgrading. Please don’t
upgrade the firmw are unnecessarily. Your camera may be damaged if misconfigured during an upgrade.
NOT E:
1) Before upgrade the firmware, please unplug the SD card and reboot the camera, don’t
upgrade the firmware in WAN through the web UI, or else the upgrade process may be failed.
2) Please ensure you have download the correct firmware package for your camera before
upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
73
73
w
ww w.foscam .com
you upgrade.
3) Upon downloading the firmware check the sizes of the .bin files. They must match t he size in
the readme.txt file. If not, please download the firmware again until the sizes are the same.
Your camera will not function correctly if a corrupt .bin file is used.
4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device
System Firmware.
5) Never shut down the power of the camera during upgrade until the IP camera restart and get
connected.
6) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the
camera to the default factory settings before using the camera.
4.10.3 Factory reset
Click All reset and all parameters w ill return to factory settings if selected. This is similar to press the Reset
button on the bottom of the camera..
Figure 4.61
4.10.4 Reboot System
Click Reboot System to reboot the camera. This is similar to unplugging the pow er to the camera.
Figure 4.62
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
74
74
w
ww w.foscam .com
5 Playback
On this page you can view the record files stored in the SD card.
Section 1 Define the Record files time and Type
: The storage path of record files
: Here supports three types: current day, current month and All records. Another w ay,
select the time on the time&date manually.
: The type of records files, Here supports tw o typs: Normal record, Alarm record and
All records.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
75
75
w
ww w.foscam .com
: Click this button to search all record files satisfy the conditions you selected.
Section 2 Search record files
On this panel you can see all record files satisfy the conditions you set.
Section 3 Play/Stop/Audio/Full screen buttons
Please select one record file before use these buttons.
Click this button to play the record files
Click this button to stop the record files
Open or stop audio
Click this button to make full screen, and double click left mouse to exit full screen.
6 Phone APPs
With Phone APPs , you can view your camera directly as a computer anyw here, anytime.
This section
show s the user how to set up the iPhone, and Android mobile phones to view Foscam cameras w ith Phone
APPs.
6.1 APP for Android cell phones
There are tw o w ays to install the phone App :
1) Search the APP “Foscam ip cam view er” in the Google Play directly if your cell phone has installed Google
Play.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
76
76
w
ww w.foscam .com
Figure 6.1
Dow nload and install the phone view app, then you can see the shortcut icon in your cell phone screen.
2) Enter http://play.google.com in the URL field of the brow ser, then search the APP “Foscam ip cam view er”.
Dow nload and install the APP.
Click the shortcut icon
and login Phone APP.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
77
77
w
ww w.foscam .com
Default user name is admin
with a blank password
Figure 6.2
Enter the user name and passw ord then click Login button, you can see the follow ing surveillance w indow s:
Figure 6.3
The default surveillance w indow is black, you need to add devices to it and then connect the device.
Please check the login window above, it was divided to 3 sections from no. 1 to 3.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
78
78
w
ww w.foscam .com
Section1 Exit / Go to Device List Buttons
Click this icon and exit Phone App
Click this icon and back to Device List page to add cameras to the softw are
Section2 Live view window
If the camera supports PT function, here slide on the screen w ith your finger, the camera w ill rotate follow
your finger direction.
Section3 Playback/ Snapshot/Audio/Talk buttons
Playback
Click this icon to play the pictures you have captured.
Snapshot
Click it to make snapshot.
Audio button
Click it and you w ill hear sound captured by the camera’s built-in microphone.
Make sure the camera supports Audio. Click the icon again and stop Audio.
Talk button
Click it then talk through your cell phone’s microphone w hich w ill transmit through
the camera’s speaker. People w ill hear your talking through the camera’s built-in speaker. Make sure the
camera supports Talk.
Click the icon again and stop talking.
How to add cameras to the Phone APP
The follow ing steps are required before adding cameras to the APP:
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
79
79
w
ww w.foscam .com
1） Install the IP Camera(s) w hich w ants to be monitored.
2） Login the IP Camera(s) by w eb brow ser and set the IP address, port, username & passw ord and make
sure the camera can be accessed by brow sers.
3） DDNS setting is a plus w henever you w ant to add the devices by WAN.
Click the button
and go to Device List page, this section w ill show you how to add cameras in LAN or in
WAN.
Figure 6.4
Section1 Back button
: Click this icon and back to the surveillance w indow
Section2 Device List
Here w ill list all cameras that added to the softw are.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
80
80
w
ww w.foscam .com
Section3 Add device buttons
Add device in LAN
: Click this icon and the APP w ill search all cameras in LAN automatically. Such as the follow ing
screen:
Figure 6.5
Select the camera IP and click OK to add cameras in LAN, then you can see the camera in the Device List.
Add device through scanning UID (User Identification) number
: UID Scan. Click this icon and scan the UID no. in the camera body, then the camera can be added to
the App.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
81
81
w
ww w.foscam .com
Figure 6.6
Normally each camera has one unique UID and UID is used for PnP function. Now our camera does not
support UID number, so here you cannot allow to use UID to add device.
Add device in WAN
: Click this icon and you can add cameras in WAN manually.
Click this icon and it pops up the follow ing screen, here you can add cameras manually.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
82
82
w
ww w.foscam .com
Figure 6.7
Camera Type: Our Company produces tw o series cameras: MJ and H.264. Here select the camera type
that you w ant to add.
Camera name: The Camera name is a unique name that you can give to your device to help you identify it.
IP address: Fill in the camera’s DDNS host or WAN IP not LAN IP.
Stream type: It has tw o types: Main stream and Sub stream. For cell phones, w e recommend you to select
Sub stream to get more fluent video.
Http / Media port: For MJ cameras, here share the same port.
User name &Password: The camera’s user name and passw ord.
UID: If your camera supports UID, here you may fill in the UID no..
support UID.
Click the icon
to add camera then you can see the camera in the Device List.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
83
Now FOSCA M camera does not
83
w
ww w.foscam .com
Select one IP address and click it, then you c an enter the surveillance w indow .
Select one IP address in the Device List and press it for a moment, it pop up the follow ing screen:
Figure 6.8
Edit: Re- edit the camera’s information, such as the Http / Media port, user name and password,
and so on. Click Edit and you can go to Add camera page (Figure 6.7).
Delete device: Delete the camera from the Device List.
6.2 APP for iPhones
If you use iPhone, please search the APP “Foscam ip cam view er” and install it through APP Store, then you
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
84
84
w
ww w.foscam .com
can see the shortcut icon in your cell phone screen.
Click the icon and you can go to “ipcam table” page directly:
Figure 6.9
The default device list is null, you need to add cameras to it.
Section1 Camera list
Here w ill list all cameras that added to the softw are.
Section2 ipcam table/ add ipcam buttons
Click this icon and back to ipcam table page, here you can see all cameras that have added to the
softw are.
: Click this icon and back to add ipcam page, here you can add cameras in LAN or in WAN to the
softw are.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
85
85
w
ww w.foscam .com
How to add cameras to the APP？
The follow ing steps are required before adding cameras to the App:
1) Install the IP Camera(s) w hich w ants to be monitored.
2) Login the IP Camera(s) by w eb brow ser and set the IP address, port, username & passw ord and make
sure the camera can be accessed by brow sers.
3） DDNS setting is a plus w henever you w ant to add the devices by WAN.
If you w ant to add cameras to the App, please click this icon
go to “add ipcam” page(Figure 5.10).
Click this icon and go to “add
ipcam” page
Figure 6.10
Add device in LAN
Click this button
and the APP w ill search all cameras in LAN, then add it to APP automatically .
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
86
86
w
ww w.foscam .com
The cameras in LAN can
be searched and added to
APP automatically
Figure 6.11
There is a icon
after the camera name, click it and you can enter the user name, passw ord and w eb port
to login the camera.
Figure 6.12
Add device in WAN
Step 1: Click the Add Camera icon
to add cameras manually.
Step 2: Select the camera type: mjpeg or h.284 (Figure 5.13), then enter the camera’s basic information like
camera name , ip , http/media port, user name, passw ord and so on(Figure 4.14).
Figure 6.13
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
87
87
w
ww w.foscam .com
Figure 6.14a Add H.264 Device Page
Figure 6.14b Add MJPEG Device Page
UID: If your camera supports UID, here you scan UID number. Now FOSCA M camera does not support UID.
Device name: The Device name is a unique name that you can give to your device to help you identify it.
IP address: Fill in the camera’s DDNS host or WAN IP not LAN IP.
User &Password: The camera’s user name and passw ord.
Media / Web port: For MJPEG cameras, here only support w eb port.
Stream type: It has tw o types: Main stream and Sub stream. For cell phones, w e recommend you to select
Sub stream to get more fluent video.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
88
88
w
ww w.foscam .com
Step 3: Click Add button
to add cameras, then you can see the camera name in the “ip cam table”
page.
Figure 6.15
Surveillance windows
Back to “ipcam table” page and you can see all cameras that have added. There is a icon
after one
camera name, click this icon and you can alter the camera’s user name, passw ord, media port and http port.
Figure 6.16
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
89
89
w
ww w.foscam .com
Figure 6.17
Click one camera ip and you can see the live video.
Figure 6.18
Please check the login window above, it was divided to 4 sections from no. 1 to 4.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
90
90
w
ww w.foscam .com
Section1 Back Button
: Click this icon and back to “ipcam table” page.
Section2 Photo Button
Click this icon and look the photos you have captured.
Section3 Live view window
If the camera supports PT function, here slide on the screen w ith your finger, the camera w ill rotate follow
your finger direction.
Section4 Snapshot/Audio/Talk buttons
Talk
Audi
Snapshot
Snapshot
Click it to make snapshot.
Audio button
Click it and you w ill hear sound captured by the camera’s built-in microphone. Make sure the camera
supports Audio. Click the icon again and stop Audio.
Talk button
Click it then talk through your cell phone’s microphone w hich w ill transmit through the camera’s speaker .
People w ill hear your talking through the camera’s built-in speaker. Make sure the camera supports Talk.
Click the icon again and stop talking.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
91
91
w
ww w.foscam .com
7 APPENDIX
7.1 Frequently Asked Questions
NOTE: Any questions you w ould meet, please check Netw ork connections firstly. Check the w orking status
revealed by the indicators on the netw ork server, hub, exchange and netw ork card. If abnormal, check the
netw ork connections.
7.1.1 How to download and installl the ActiveX for Firefox users
For the first time login the camera, it may prompt you to dow nload plugin.
Click here to download
the plugin
Figure 7.1
Drag the dow nload file to Firefox w eb page and it w ill prompt you to Install it.
Click Install Now
Figure 6.2
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
92
92
w
ww w.foscam .com
Reboot the Firefox after the plugin installation is successfully completely, then relogin the camera again, you
can see the surveillance w indow
NOT E: If you could not view living video after running the ActiveX, only a red cross
in the center of the
video or just a black screen. Please change another port number to try.
Make sure all firew all or antivirus softw are on your computer does not block the active dow nload and
installation. If you are unable to run the ActiveX control, try shutting dow n the firew all or antivirus program.
7.1.2 How to download and installl the ActiveX for Google Chrome users
For the first time login the camera, it w ill prompt you to dow nload the ActiveX..
Figure 7.3
Dow nload the plugin and drag it to the Extensions page of Google Chrome.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
93
93
w
ww w.foscam .com
Go to Extensions page
Figure 7.4
Click Add button to install the Plugins.
Click Add button to install
the plugin
Figure 7.5
Reboot the brow ser and relogin the camera, you w ill see the surveillance w indow.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
94
94
w
ww w.foscam .com
7.1.3 I have forgotten the administrator password
To reset the administrator username and passw ord, press and hold dow n the RESET BUTTON for 5 seconds.
Upon releasing the reset button, w ait for 20 seconds, the camera w ill reboot and the username and passw ord
w ill return to the factory default administrator username and passw ord. Please pow er on the camera before
reset
Default administrator username: adm in
Default administrator passw ord: No passw ord
7.1.4 Camera can not record when I click Record button or I can’t change the
manually record path
When you use Windows7 or Vista, you may be not able to do manually record or change the
record path because of the security settings of computer.
There are two ways to resolve this problem:
(1) Please add the camera as a trusted site to resolve this issue. The steps are
IE browserToolInternet PropertiesSecurityTrusted sitesSitesAdd
(2) Open IE browser, then right click, select “Run as administrator”
7.1.5 Subnet doesn’t match
Check whether your ipcamera in the same subnet of your computer. The step is Control
PanelNetwork ConnectionsDbclick Local Area Connections  Choose
GeneralProperties.(Figure 3.23/3.24) Check subnet mask, IP address and gateways. When
you set IP address please make sure they are in the same subnet. Otherwise you can't access
camera.
7.1.6 No Pictures Problems
The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed
correctly you will see no video image. You can resolve this problem by this way:
Download ActiveX controller and set the safety property of IE in the PC when y ou view it first time:
IE browserToolInternet ProperSecurityCustom LevelActiveX control and Plug-ins.
Three options of front should be set to be “Enable”, The ActiveX programs read by the computer
will be stored. As follows:
Enable: Download unsigned ActiveX controls
Enable: Initialize and script ActiveX controls not marked as safe
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
95
95
w
ww w.foscam .com
Enable: Run ActiveX controls and plug-ins
Figure 7.6
If you allow the ActiveX running, but still could not see living video. Please change another port number to try.
Don’t use port 88.
Figure7.7
NOT E: Make sure that your firew all or anti-virus softw are does not block the camera or ActiveX. If you could
not see video, please shut dow n firew all or anti-virus softw are to try again.
7.1.7 Can’t access IP camera in internet
There are some reasons:
1、ActiveX controller is not installed correctly
2、The port w hich camera used is blocked by Firew all or Anti-virus softw are. Please change another port
number and try again. (Figure7.7)
3、Port forw arding is not successful(Figure4.30)
Check these settings and make sure they are correct.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
96
96
w
ww w.foscam .com
7.1.8 UPnP always failed
UPnP only contains port forw arding in our recent softw are. Sometimes, it may be failed to do port forw arding
automatically because of firew all or anti-virus softw are. It also has much relation w ith router’s security settings.
So w e recommend you do port forw arding manually. You can view your camera in internet successfully after
you do port forw arding manually in your router(Figure 4.30).
7.1.9 Camera can not connect wireless
If your camera could not connect w ireless after you set w ireless settings and plug out the cable. Please check
w hether your settings are correct or not.
Normally, camera can’t connect w ireless mainly because of w rong settings.
Make sure broadcast your SSID; use the same encryption for router and camera.
7.1.10 Can’t see other cameras listed in multi-device when using remote access
If you w ant to view all the cameras via the WAN, verify that each camera added in the multi-device settings can
be accessed by using the DDNS name and port number. Use the DDNS domain name not the camera’s LAN
IP. (For more details see: How to add cameras in WAN)
7.2 Default Parameters
Default network Parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gatew ay: obtain dynamically
DDNS: Embedded FOSCA M domain name
Username and password
Default admin username: admin w ith a blank passw ord
7.3 Specifications
Im age
ITEMS
Sensor
Image Sensor
FI9821W
1/4"Color CMOS Sensor
Display Resolution
Lens
1280*720 Pixels
f: 2.8mm, F:2.4
Mini. Illumination
0.5Lux
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
97
97
w
ww w.foscam .com
Video
View angle
Image Compression
Resolution
70 degrees
H.264
View
720p（1280*720），VGA（640*480）
H.264 dual streaming
Image adjust
Infrared mode
The brightness, contrast, saturation , is adjustable
Automatic , manual (on/off)
Light Frequency
Night visibility
50Hz, 60Hz
Φ5mm 11 IR LEDs, Night visibility up to 8 meters
Pan/Tilt Angle
Ethernet
Horizontal:300°& Vertical: 120°
One 10/100Mbps RJ-45
Supported Protocol
Wireless Standard
TCP/IP、UDP/IP、HTTP、SMTP、FTP、DHCP、DDNS、UPNP
WIFI(IEEE802.11b/g/n)
Power
Support IP address
Pow er Supply
static IP address, dynamic IP address
DC 5V/2.0A (EU,US,A U adapter or other types optional)
Alarm
Pow er Consumption
Alarm detection
8Watts (Max.)
The motion detecting, detection threshold Settings
Alarm inform
Support Email、FTP etc alarm inform w ay
SD CA RD
SD CA RD (Support to 32G)
Audio Input/Output
Reset Buttons
One audio input jack, One audio output jack.
One Reset
Ethernet
Wireless Interface
One 10/100Mbps RJ-45
WIFI antenna
Operate Temper.
0°~ 55°C (32°F ~ 131°F)
Operating
10% ~ 80% non-condensing
Network
Hardw are
Interface
Environment
Physical
PC Requirements
Humidity
Storage Temper.
-10°C ~ 60°(14°F ~ 140°F)
Storage Humidity
0% ~ 90% non-condensing
Dimension
Gross Weight
117(L) x114(W) x129mm(H)
814g(Color Box Size:245 x 145 x 165mm)
Net Weight
348g
CPU
2.0GHZ or above
Memory Size
Display Card
256MB or above
64M or above
Supported OS
Microsoft Window s 2000/XP/Vista/Window s7-32bit/Window s764bit/Window s8- 32 bit/ Window s8-64bit/ mac
Brow ser
IE6 and above version or compatible brow ser, Firefox or other
standard brow sers
Upgrade from netw ork
Software
Upgrade
Certification
CE,FCC
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
98
98
w
ww w.foscam .com
7.4 CE & FCC
Electromagnetic Compatibility (EMC)
FCC Statement
This device compiles with FCC Rules Part 15. Operation is subject to the following two
conditions.
 This device may not cause harmful interference, and
 This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the installation manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is like to
cause harmful interference, in which case the user will be required to correct the interference at
his own expense.
FCC Caution
Any changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
7.5 WARRANTY
ShenZhen FOSCAM Intelligent Technology Limited.("FOSCAM") values your business and
always attempts to provide you the very best of service.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
99
99
w
ww w.foscam .com
No limited hardware warranty is provided by FOSCAM unless your FOSCAM product ("product")
was purchased from an authorized distributor or authorized reseller. Distributors may sell
products to resellers who then sell products to end users. No warranty service is provided unless
the product is returned to an authorized return center in the region where the product was first
shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty
implications.
If you purchase your FOSCAM product from online store, please contact the
point-of-purchase and ask for return/replacement/repair service.
Hardware Warranty Information

FOSCAM provide 2-year limited warranty for naked product and 6-month limited warranty
for accessories.
Limited Hardware Warranty

FOSCAM products are warranted to be free from manufacturing defects in materials and
workmanship starting from the shipping date of FOSCAM.
This limited hardware warranty does not cover:





Software, including the software added to the products through our factory -integration
system, software that included in the CD,etc.
Usage that is not in accordance with product instructions .
Failure to follow the product instructions.
Abuse firmware upgrade without the authorized technician’s guidance.
Normal wear and tear.
Return Procedures
Please read FOSCAM warranty policy & policy of your reseller first before sending items
back to point-of-purchase.
 Customer must first contact point-of-purchase to obtain a Return Merchandise
Authorization (RMA) number before returning the product. If the product you received is
suspected to be defective and the product warranty has not expired, The RMA number
will allow your reseller to track your return much easier and help them expedite processing
your request.
 After receiving your RMA case number, pack the item(s) very well with the original box
and all the original accessories included such as power adapters, brackets, cables,
manuals, and driver CD disks.
 Write your RMA number and the return reason (the problem of the product) on the
warranty card along with the complete package to send them back.

Replacement Services
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
100
100
w
ww w.foscam .com







If customers ask for replacement service, please contact point-of-purchase and
follow their policy.
Our technicians will inspect all items returned for replacement requests. If the retuned
product is found in working order, we will return the same item received. However
customers shall be responsible for all shipping & handling charges incurred for getting the
units back to customers.
If returned products are found defective, we will replace the product and assume the
shipping cost for sending back the replacement unit to customers.
If for any reason, we are unable to provide a replacement of the original returned item(s).
You will have a choice for a “Substitute” item at the same equal value.
We do not provide exchange and replacement due to normal hardware upgrade
according the market after 14 days after the product is delivered.
Our technicians will test the product before send out the replacement, any other demand
for more than two times replacement for the same product during replacement limit will
be rejected.
Replaced products are warranted from the balance of the former warranty period.
Warranty Forfeiture











Warranty is void if purchase from unauthorized distributor or reseller.
Warranty is void if trade-mark, serial tags, product stickers have been removed,
altered or tampered with.
Warranty is void for mishandling, improper use, or defacing the product.
Abuse firmware upgrade without the authorized technician’s guidance.
Warranty is void for physical damage, altered, either internally or externally, improper or
inadequate packaging when returned for RMA purposes.
Warranty is void if damage has resulted from accident, dismantle, abuse, or service or
modification by someone other than the appointed vendor, souse, fission or the spare part
has been over the period of warranty.
Warranty is void if product is damaged due to improper working environment or operation.
(For example, improper temperature, humidity, unusual physical or electrical stress or
interference, failure or fluctuation of electrical power, static electricity, using wrong power
adapter, etc.)
Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM.
Damage caused by improper installation of third-party products.
Warranty is void if damaged for irresistible cause, such as earthquake, fire, lightning, flood,
etc.
Product beyond limited warranty.
Shipping Fee

If products are defective or damaged under normal use or operation in the replacement
limit, distributors or resellers are responsible for the shipping cost the product back to
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
101
101
w
ww w.foscam .com
customers, customers should assume the shipping cost send the product to the
point-of-purchase.
 During replacement limit, if customers ask for replacement due to the product does not fit
for customer’s personal expectation, customers should responsible for both shipping fee.
 Customers shall be responsible for both shipping fee if their product beyond the
replacement limit but still in warranty limit.
Repair Service Out Of Warranty
FOSCAM provide extra repair service for product that out of warranty, it is chargeable.
The total fee contains device cost and service fee. Device cost (including accessories) is
the standard uniform price provide by FOSCAM.
 Different region may have different service fee, please contact the point-of-purchase to
confirm that before you ask for this service.
 Our technicians will quote the total price after detect the product, If customers refused to
repair after the quotation, customers need pay for the test fee, $3.5/hour. If agree with the
quotation, test will be free.
 Repaired product out of warranty will obtains 3-month warranty from the date of the
product back to customers.

Limitation of Liability
FOSCAM is not responsible for other extra warranty or commitment promised by resellers,
if your reseller promised some extra commitment or warranty; please ask for written
documents to protect your rights and interests.
 FOSCAM does not offer refunds under any circumstances. Please contact the
point-of-purchase and follow their refund/return policy.
 FOSCAM shall not be liable under any circumstances for any consequential, incidental,
special or exemplary damages arising out of or in any connection with this agreement or
the products, including but not limited to lost profits, or any claim based on indemnity or
contribution, or the failure of any limited or exclusive remedy to achieve its essential
purpose or otherwise. Purchaser's exclusive remedy, as against FOSCAM, shall be the
repair or replacement of defective parts. If FOSCAM lists a product on its website
specification in error or that is no longer available for any reason, FOSCAM reserves the
right to explain it without incurring any liability.

All rights reserved. FOSCAM and the FOSCAM logo are trademarks of ShenZhen
FOSCAM Intelligent Technology Limited., registered in the U.S. and other countries.
8 OBTAINING TECHNICAL SUPPORT
While w e hope your experience w ith the IPCA M netw ork camera is enjoyable and easy to use, you may
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
102
102
w
ww w.foscam .com
experience some issues or have questions that this User’s Guide has not answ ered.
If you have problem w ith FOSCA M IP camera, please first contact FOSCA M reseller for
solving the problems. If our reseller cannot provide service, please contact our service
department: tech@foscam.com
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.
This device and its antenna( s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Sh enz hen Fos cam In te lligen t Te chn o lo gy Co ., L im ite d
Te l: 86 755 2674 5668 Fax: 86 755 2674 5168
103
103

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 104
Language                        : zh-CN
Title                           : 1
Author                          : Sky123.Org
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2013:07:02 02:18:16
Modify Date                     : 2013:07:02 02:18:16
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools