ShenZhen Fujikam Industry Development RF1 RF Peripheral Wireless Door / Window Sensor User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3444319
Application ID	3kHyzYE4xZEhA6yAyQ2VMw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.19kB (414923 bits)
Date Submitted	2017-06-29 00:00:00
Date Available	2017-06-29 00:00:00
Creation Date	2017-05-27 16:57:38
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2017-05-27 16:57:38
Document Title	未命名 -2
Document Creator	CorelDRAW X6
Document Author:	Administrator

RF Perpheral
Wireless Door Sensor
RF Perpheral
Introduction
Working with Vimtag cloud IP camera, RFC1 is a wireless door sensor which could
detect the opening and closing of the doors and windows. It sends an alarm signal to
the camera when it detects over 3 cm position offset between the signal transmission
module and the magnetic box. Users could receive the alarm message on Vimtag
application, and take immediate action to stop the intruders.
Installation Guide
Step 1: Stick the Transmission module and the Magnetic box on the door or the window,
keeping them at a distance of 2 cm or less.
Step 2: Close and open the door or window to see if the red light on the transmission
module is on. If the light is on, installation succeeded.
Add Device
Specifications
Please make sure you have added cameras
to your account before adding the accessories.
Adding Procedure:
1. Log in to your account
2. Enter the ‘Settings’ interface of the camera
3. Select ‘Accessory’
4. Select ‘Door Senor’
5. Follow the APP instruction to complete adding.
Battery model: CR2032
Service life: 2 years
Power: 12dBm
Voltage: 2.7V-3.3V
Working Distance: 80M
Temperature: -10℃~55℃
CAUTION
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This device
complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Create Date                     : 2017:05:27 16:57:38+08:00
Modify Date                     : 2017:05:27 16:57:38+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Author                          : Administrator
Creator                         : CorelDRAW X6
Title                           : 未命名 -2

EXIF Metadata provided by EXIF.tools