ShenZhen HongFa Technology HBS730 bluetooth headphone User Manual

ShenZhen HongFa Technology Co., Ltd. bluetooth headphone

User Manual

  Note: Before use, pair the earbuds with the device. Refer to the section on Pairing a Bluetooth Device.1.  After downloading and installing the app, press the app icon on your phone screen to open the app. 2.  The app will automatically begin to bind the earbuds to your phone. This is a separate action from pairing Bluetooth.3.  After binding is complete, press the Camera icon in the app to begin  taking pictures.4.  Press the Play/Pause/Speakerphone/Pair/Sele button to take photos.5.  Headset battery status may be seen in  the icon at the top of your Android  phone’s screen. Note: CSR Easy Click for Apple iOS does not have the earbud battery status feature.1.  After downloading and installing the app, press the app icon on your phone screen to open the app. 2.  The app will automatically begin to bind the earbuds to your phone. This is a separate action from pairing Bluetooth.3.  Press the Play/Pause/Speakerphone/Pair/Sele button to take photos.Coolshot for Android CSR Easy Click for Apple FCC Warnings• Warning:Changesormodicationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment.NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipmentandreceiver.• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:  .Para descargar este Manual del Usuario en Inglés, Español y Francés, o para obtener  respuestas a preguntas frecuentes, visite la  sección de apoyo en: .Pour télécharger ce guide de l’utilisateur en Anglais, Espagnol ou Français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur: .International Supportconditions:(1) this device may not cause harmful interference, andundesired operation.FCC ID:2AEUUHBS730Bluetooth HeadphoneHBS730This device complies with part 15 of the FCC rules. Operation is subject to the following two(2) this device must accept any interference received, including interference that may causehttp://www.hongfatech.comhttp://www.hongfatech.comhttp://www.hongfatech.com
Controls1.  Power on the unit by sliding the Power Switch to the ON position, and press and hold the Play/Pause/Speakerphone/Pair/Sele button for 4 seconds. When pairing, remain within 3 feet of the unit. 2.  Using the controls on your Bluetooth device, select   in your Bluetooth settings to pair. If your device requests  a password, enter the default password  0 0 0 0 .3.  Refer to the user’s manual for your specic device for instructions on pairing and connecting Bluetooth devices. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.   If your device should become unpaired or you nd it is unable to connect, repeat the above steps.Note: The Play/Pause/Speakerphone/Pair/Sele button doubles as the LED Indicator.Pairing a Bluetooth DeviceLED IndicatorsStatus IndicatorsPower On Flashing blue lightPower O No lightLow Battery Flashing red lightCharging Red lightFinished Charging Blue lightPairing Wireless Flashing red and blue lightsMicro-USB PortPower SwitchMicVolume +/−Features• Supports Bluetooth• Supports prole A2DP (Advanced Audio Distribution Prole)• Smartphone linked “Sele” app• Digital volume control• Built-in microphone• Micro-USB port for battery recharge• Wireless range: 33 feet• DC battery power: built-in rechargeable lithium ion battery• Battery life: approx. 4 hrs at 100% volume 6 hrs at 50%• 3 pairs of eartips: 1 small, 1 medium, 1 large• Micro-USB to USB cable• Carry pouchIncludesBattery Power1.  Using a Micro-USB to USB cable (included), connect to the USB port of a powered on computer or USB power adaptor to charge the unit. Charge fully before use.   Initial charge time is approximately 2 hours.  The  LED indicator will display a red light when charging, and turn blue when fully charged. Playing Audio Wirelessly1.  Follow the instructions for Pairing a Bluetooth Device.2.  Use the controls on the connected Bluetooth Device to select a track.3.  To play or pause the selected track, use the controls on the connected Bluetooth Device or press the Play/Pause/Speakerphone/Pair/Sele button.4.  Audio played through the connected Bluetooth device will now be heard through the speakers.Using the Speakerphone1.  Follow the instructions for Pairing a Bluetooth Device.2.  When a call is received, a ringtone will sound through the earbuds speakers.3.  Press the Play/Pause/Speakerphone/Pair/Sele button to accept the call or accept the call using the controls on the connected mobile phone.4.  The incoming call received through  the device will now be heard through  the headset.5.  To end the call, press the Play/Pause/Speakerphone/Pair/Sele button or end the call using the controls on the connected  mobile  phone.                                                                                                                      6.  To re-dial the last dialed number, press  the Play/Pause/Speakerphone/Pair/Sele button twice. The earbuds can work with a “Sele” app that connects to your smart phone and allows you to take camera photos using the earbud controls. Scan the QR codes below to download the app from the Google Play Store or Apple App Store.“Sele” AppCSR Easy Click App for AppleCool Shot App for AndroidPlay/Pause/ Speakerphone/Pair/SelePress and hold to pairPress to play or pause the current track.Press to answer an incoming call.Press to take sele.HBS730

Navigation menu