ShenZhen HongFa Technology HBS730 bluetooth headphone User Manual

ShenZhen HongFa Technology Co., Ltd. bluetooth headphone

User Manual

Note: Before use, pair the earbuds with the device.
Refer to the section on Pairing a Bluetooth Device.
1. After downloading and installing the app,
press the app icon on your phone screen
to open the app.
2. The app will automatically begin to bind
the earbuds to your phone. This is a
separate action from pairing Bluetooth.
3. After binding is complete, press the
Camera icon in the app to begin
taking pictures.
4. Press the Play/Pause/Speakerphone/Pair/
Sele button to take photos.
5. Headset battery status may be seen in
the icon at the top of your Android
phone’s screen.
Note: CSR Easy Click for Apple iOS does not have
the earbud battery status feature.
1. After downloading and installing the app,
press the app icon on your phone screen
to open the app.
2. The app will automatically begin to bind
the earbuds to your phone. This is a
separate action from pairing Bluetooth.
3. Press the Play/Pause/Speakerphone/Pair/
Sele button to take photos.
Coolshot for Android CSR Easy Click for Apple FCC Warnings
• Warning:Changesormodicationstothisunitnot
expresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser’sauthoritytooperatethe
equipment.
NOTE:Thisequipmenthasbeentestedandfoundtocomply
withthelimitsforaClassBdigitaldevice,pursuanttoPart
15oftheFCCRules.Theselimitsaredesignedtoprovide
reasonableprotectionagainstharmfulinterferenceina
residentialinstallation.Thisequipmentgenerates,uses,
andcanradiateradiofrequencyenergyand,ifnotinstalled
andusedinaccordancewiththeinstructions,maycause
harmfulinterferencetoradiocommunications.However,
thereisnoguaranteethatinterferencewillnotoccurina
particularinstallation.Ifthisequipmentdoescauseharmful
interferencetoradioortelevisionreception,whichcanbe
determinedbyturningtheequipmentoffandon,theuseris
encouragedtotrytocorrecttheinterferencebyoneormore
ofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentand
receiver.
• Connecttheequipmentintoanoutletonacircuit
differentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnician
forhelp.
To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at: .
Para descargar este Manual del Usuario en
Inglés, Español y Francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en:
.
Pour télécharger ce guide de l’utilisateur en
Anglais, Espagnol ou Français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur:
.
International Support
conditions:
(1) this device may not cause harmful interference, and
undesired operation.
FCC ID:2AEUUHBS730
Bluetooth Headphone
HBS730
This device complies with part 15 of the FCC rules. Operation is subject to
the following two
(2) this device must accept any interference received, including interference
that may cause
http://www.hongfatech.com
http://www.hongfatech.com
http://www.hongfatech.com
Controls
1. Power on the unit by sliding the Power
Switch to the ON position, and press and
hold the Play/Pause/Speakerphone/Pair/
Sele button for 4 seconds. When pairing,
remain within 3 feet of the unit.
2. Using the controls on your Bluetooth
device, select in your Bluetooth
settings to pair. If your device requests
a password, enter the default password
0 0 0 0 .
3. Refer to the user’s manual for your specic
device for instructions on pairing and
connecting Bluetooth devices. After initial
pairing, the unit will stay paired unless
unpaired manually by the user or erased
due to a reset of the device.
If your device should become unpaired or you
nd it is unable to connect, repeat the above
steps.
Note: The Play/Pause/Speakerphone/Pair/
Sele button doubles as the LED Indicator.
Pairing a Bluetooth DeviceLED Indicators
Status Indicators
Power On Flashing blue light
Power O No light
Low Battery Flashing red light
Charging Red light
Finished Charging Blue light
Pairing Wireless Flashing red and blue lights
Micro-USB Port
Power Switch
Mic
Volume +/−
Features
• Supports Bluetooth
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Smartphone linked “Sele” app
• Digital volume control
• Built-in microphone
• Micro-USB port for battery recharge
• Wireless range: 33 feet
• DC battery power: built-in rechargeable
lithium ion battery
• Battery life: approx. 4 hrs at 100% volume
6 hrs at 50%
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB cable
• Carry pouch
Includes
Battery Power
1. Using a Micro-USB to USB cable
(included), connect to the USB port of
a powered on computer or USB power
adaptor to charge the unit. Charge fully
before use.
Initial charge time is approximately 2 hours.
The LED indicator will display a red light
when charging, and turn blue when fully
charged.
Playing Audio Wirelessly
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the controls on the connected
Bluetooth Device to select a track.
3. To play or pause the selected track, use
the controls on the connected Bluetooth
Device or press the Play/Pause/
Speakerphone/Pair/Sele button.
4. Audio played through the connected
Bluetooth device will now be heard
through the speakers.
Using the Speakerphone
1. Follow the instructions for Pairing a
Bluetooth Device.
2. When a call is received, a ringtone will
sound through the earbuds speakers.
3. Press the Play/Pause/Speakerphone/
Pair/Sele button to accept the call or
accept the call using the controls on the
connected mobile phone.
4. The incoming call received through
the device will now be heard through
the headset.
5. To end the call, press the Play/Pause/
Speakerphone/Pair/Sele button or
end the call using the controls on the
connected mobile phone.
6. To re-dial the last dialed number, press
the Play/Pause/Speakerphone/Pair/
Sele button twice.
The earbuds can work with a “Sele” app that
connects to your smart phone and allows
you to take camera photos using the earbud
controls. Scan the QR codes below to download
the app from the Google Play Store or Apple
App Store.
“Sele” App
CSR Easy Click App for AppleCool Shot App for Android
Play/Pause/
Speakerphone/Pair/Sele
Press and hold to pair
Press to play or pause the current track.
Press to answer an incoming call.
Press to take sele.
HBS730

Navigation menu