ShenZhen Jumper Medical Equipment JPDTH100 Wireless Intelligent Thermoment User Manual
ShenZhen Jumper Medical Equipment Co.,Ltd Wireless Intelligent Thermoment Users Manual
Users Manual
UserManual
WirelessIntelligentThermometer
Model:JPD-TH100
Date of Issue: Mar. 10, 2017, Version: A/0
Technical SpecificaonsCleaning & Disinfecng
Care & Maintenance
Troubleshoong
Power supply mode Internal power source
Type B applied parts
CR 2032 buon baery
DC3.0V
Diameter:33mm; Height: 8.5mm
8.5g
2 years, producon dateonthelabel.
32.0°C ~42.0°C/89.6℉ ~107.6℉
±0.1°C/±0.2°F
10m
Classificaon
Baery specificaon
Working voltage
Dimensions
Weight
Service life
Temperature range
Measurement accuracy
Transmission distance
Operang environment
Transportaon &
storage environment
5°C~40°C; ≤80% RH; 70kpa ~ 106kpa
-20°C~55°C; 10% RH~93% RH; 50kpa ~ 106kpa
Store in well-venlated room without aggressive gas.
(Notes: Do not soak intelligent thermometer in liquid for cleaning or disinfecng.
Do not allow liquid to penetrate the intelligent thermometer.)
Cleaning:
Wet the clean so cloth with a small amount of water or mild detergent, wring
it out and wipe the dirty parts or the sensing parts.
Acid detergent or alkaline detergent is prohibited to use.
Disinfecng:
Wet the clean so cloth with a small amount of medicinal alcohol (concentraon:
75%), wipe the intelligent thermometer and the sensing parts before and aer use.
Put the intelligent thermometer in clean storage box and store the box in
well-venlated and dry place aer use.
Take out the buon baeries of intelligent thermometer if it want be used for
a long me.
In order to avoid the damages on parts, prevent the intelligent thermometer from
falling off and violently crashing during use. Do not clean the intelligent
thermometer with acetone, gasoline and other strong solvents.
Problem
Fail to connect
to
smartphone
Possible reason Soluon
A. The buon baery is run
out of power;
B. The baery is inserted in
wrong poles.
A. Replace the baery.
B. Insert the baery based on
the right poles.
Shenzhen Jumper Medical Equipment Co.,Ltd.
EC REP Wellkang Ltd
Suite B, 29 Harley Street, London W1G 9QR,UK
D Building, No. 71, Xintian Road, Fuyong Street, Baoan,
Shenzhen, Guangdong, China.
Tel: +86-755-26696279
Fax: +86-755-26852025
Website: hp://www.jumper-medical.com
Frequency Range 2402-2480MHz
Max.RF power -1.9dBm
RF Exposure Informaon and Statement :
This equipment complies with FCC RF radiaon exposure limits set forth for an
uncontrolled environment.
This device complies with part 15 of the FCC rules Operaon is subject to the
following two condions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operaon.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modificaons to this equipment. Such modificaons
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operang in conjuncon
with any other antenna or transmier.
Android ios
Package contents
Intended Use
Producon Introducon
Connect to Mobile Phone
Warning
Components
Applicaon
1. Download an APP
(scan the QR code on the right.)
For avoiding environmental polluon, please properly treat the old baery
The Intelligent Thermometer composes of the main circuit, temperature
sensing parts, buon baery, shell and app in smart phone.
The Intelligent Thermometer can measure the temperature on the surface of
people’s chest, and display the results on app of smart phone through Bluetooth.
Precauons
Please do not disassemble the Intelligent Thermometer except for replacing
the baery.
Do not use the Intelligent Thermometer in places with strong electromagnec
field; otherwise, the Bluetooth signal may be interfered.
Keep the body sll during measurement.
Wipe the Intelligent Thermometer and its temperature sensing parts with medical
alcohol for disinfecng before and aer the measurement.
Put the Intelligent Thermometer in clean storage box and store the box in well-
venlated and dry place aer use.
Please do not wash the Intelligent Thermometer with water or other liquids.
aer replacement. In order to avoid the risk of choking, please keep the Intelligent
Thermometer and buon baery out of the reach of children, immediately send the
children that swallow either of them to hospital.
It is dangerous to diagnose the illness state by yourself based on the measurement
results. Please consult the doctor if you have any concern.
Only measure the temperature of children under adult supervision.
Please do not use the Intelligent Thermometer for other purposes.
Only use the Intelligent Thermometer to measure the temperature of chest instead
of other posions (e.g. forehead, mouth, ears).
1. Flip the cover upwards with thumb fingernail to open the cover.
2. Take the old buon baery out and insert a new one with posive pole upwards.
3. Align the notches of cover and baery box, and close the cover.
2. Start soware and connect to Intelligent Thermometer Open Bluetooth in smart
phone, start app, scan the QR code on Intelligent Thermometer and connect to a
smartphone.
(Notes: The Intelligent Thermometer has no switch, so it is started up aer the
buon baery is installed. The Bluetooth is in sleeping mode aer being
disconnected from smart phone.)
Replace Baery
Wearing & Using
1. Open the package.
2. Take buon baery out, open the cover of Intelligent Thermometer, and install
the baery.
3. Scan QR code with a smartphone to download an App.
4. Take a piece of medical adhesive tape and sck the Intelligent Thermometer on
chest.
5. Turn on the Bluetooth for your smartphone, start app, scan the QR code on
Intelligent Thermometer and enter into temperature measurement interface.
6. Measure temperature, and update the result every 2 seconds.
Wireless Intelligent Thermometer is a wearable and intelligent device that
measures body temperature, which can quickly and accurately measure the
body temperature via its medical temperature sensing parts on the boom.
The user scks the Intelligent Thermometer on chest with medical proof
fabric and starts app on smart phone to view the measurement results at any
me. Featuring small size, skin-friendly boom and safe material without
toxicant and anaphylacc reacon, the Intelligent Thermometer can be worn
for 24 hours.
The Intelligent Thermometer is used for measuring people’s body temperature
at home or in medical instuons.
Advantages
Safe & accurate: Medical materials with high measurement accuracy;
Skin-friendly: Small size and skin-friendly design;
Economic & convenient: Replaceable buon baery and reusable Intelligent
Thermometer;
Low power consumpon: Switch-free design and low power consumpon Bluetooth;
Convenient measurement: 24-hour monitoring and data viewing in app.
Wireless Intelligent thermometer x 1 Buon baery x 1
Medical proof fabric x 1 User manual x 1
Symbol Descripon
IP20
Cauon, consult the instrucons for use.
Type CF applied parts
Waste electrical materials should be sent to a dedicated collecon
point for recycling.
The degree of protecon against harmful ingress of water and
parculate maer
Symbol & Descripon
Warning: Please installing the baery correctly, or the instrument will be damaged.
Regulatory Conformance （RED）
Hereby, Shenzhen Jumper Medical Equipment Co.,Ltd declares that the radio
equipment type JPD-TH100 is in compliance with Direcve 2014/53/EU.
The full text of the EU declaraon of conformity is available at the following website:
hp://www.jumper-medical.com