ShenZhen KaiXingHui Technology F500 Wireless charger User Manual 1
ShenZhen KaiXingHui Technology Co.,Ltd. Wireless charger 1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3838615 |
| Application ID | xVqgurXY/Y63RO2TAEqRMg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 47.25kB (590601 bits) |
| Date Submitted | 2018-05-03 00:00:00 |
| Date Available | 2018-05-03 00:00:00 |
| Creation Date | 2018-02-06 13:59:13 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2018-04-28 09:51:02 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | PC-02 |
Wireless Charger F500 User Manual FCC ID: 2AOSUF500 FCC STATEMENT: Product Introduction This equipment has been tested and found to comply with the limits for a WPC device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. Wireless charger F500 is an intelligent simple design product, compatible with all Qi-enabled cell phones and devices. You don't need any cords to plug in and out any more. Just placing your device in the center of F500, you are free to enjoy your wireless and limitless charging experience now! PowerInput Wireless Charging Pad Model:F500 Input:DC 5V/2A ,9V/1. 6 7A Output: 5 W/ 7 . 5 W/10W UP WIRELESS CHARGER BACK Made In China FCC ID: 2AOSUF500 - Increase the separation between the equipment and receiver. LEDindicatorarea - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Anti-slipperyRubberband - Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANCE (How to output 5w/7.5w/10w?) 7.5W 10W How can work with 7.5W wireless charging power (Max output power up to 7.5W fast wireless charging standard )? How can work with 10W wireless charging power (Max output power up to 10W fast wireless charging standard )? Using 5V,2A adapter It is compatible with Any enabled devices like iPhone 8/ iPhone 8 plus/ iPhone X, Samsung Galaxy Note 8/ S8/ S8plus / S7/ S7edge/ S6 edge plus/ Note 5/ S6/ S6 edge/ S9 series devices and so on. Size: 94.4mmX12.2mm Use Instruction 1. Please use good brand 2A adapter or QC2.0/QC3.0 fast charging adapter(9V,1.67A). 2. Connecting power with USB port, the indicator will lights up for 3 seconds when power is on. 3.① Locate your phone on charging pad and make sure it at sweet spot for effective charging. ②When the phone is charged successfully, the LED indicator will lights up for 16 seconds then off to keep the whole charging process sleep-friendly. WIRELESS CHARGER 5W How can work with 5W wireless charging power? Adapter Type Compatible Device Output: 5W/7.5W/10W Charging Efficiency: ≥73% WIRELESS CHARGER Output Power Input: 5V/2A, 9V/1.67A Charging Distance: ≤10mm Using QC2.0/QC3.0 fast charging adapter(9V,1.67A) Such as: Samsung fast charging adapter(9V,1.67A) ② Anker QC2.0/3.0 fast charging adapter ① It is only compatible with iPhone 8/ iPhone 8 plus/ iPhone X and so on. Using QC2.0/QC3.0 fast charging adapter(9V,1.67A) Such as: Samsung fast charging adapter(9V,1.67A) ② Anker QC2.0/3.0 fast charging adapter ① It is only compatible with Samsung Galaxy Note 8/ S8/ S8plus/S7/ S7edge/ S6 edge plus/ Note 5/ S9 series devices so far. Package Contents Attention: Wireless Charger(F500) USB Cable User Manual 1.Keep the charger away from water and other liquid is required. 2.Please make sure the power is cut off before you start to clean the charger. 3.Use the charger under temperature only between 0-45°C WIRELESS&LIMITLESS WIRELESS&LIMITLESS
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : PC-02 Title : 未命名 -1 Create Date : 2018:02:06 13:59:13+08:00 Creator Tool : CorelDRAW X6 Modify Date : 2018:04:28 09:51:02+08:00 Metadata Date : 2018:04:28 09:51:02+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Document ID : uuid:d887c875-c620-4fd3-9185-3dedcf39dfe2 Instance ID : uuid:0a2c4ef5-05c9-4226-a742-cbfa9254b077 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Author : PC-02EXIF Metadata provided by EXIF.tools