ShenZhen KaiXingHui Technology X1 Wireless charger User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3985713
Application ID	5uEzlcfjIogpxRfd+C35xQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.94kB (536748 bits)
Date Submitted	2018-08-31 00:00:00
Date Available	2018-09-05 00:00:00
Creation Date	2018-08-16 14:48:47
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2018-08-16 14:48:47
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	PC-02

尺⼨：108*72mm
Wireless Charger Stand User Manual
X1
Environmentally friendly disposal
Thanks For Choosing Us!
In order to bring you a better experience, read this
manual and also please refer to your mobile phone or
your electronic product manual.
Old electrical appliances must not be disposed of together
with the residual waste, but have to be disposed of separately.
The disposal at the communal collecting point via private
persons is for free. The owner of old appliances is responsible
to bring the appliances to these collecting points or to similar
collection points. With this little personal effort, you contribute
to recycle valuable raw materials and the treatment of toxic
substances.
Product Introduction







Wireless charger X1 is an intelligent simple
design product, compatible with all Qi-enabled cell
phones and devices. You don't need any cords to
plug in and out any more. Just placing your device in
the center of X1, you are free to enjoy
your
wireless

and
limitless
charging
experience
now!
FCC ID: 2AOSUX1
FCC STATEMENT:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Built-in 2 Coils
This equipment has been tested and found to comply with the limits for a WPC
device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the product.
Anti-slippery
Rubber band
NOTE: This equipment has been tested and found to comply with the limits for a
wireless power charger, pursuant to Part 18 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Power Input
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use Instruction
LED
indicator area
3.
① Locate your phone on charging pad and make sure
it at sweet spot for effective charging.
1.
Please use good brand 2A adapter or
QC2.0/QC3.0
fast charging adapter(9V,1.67A).
2.
Connecting power with USB port, the indicator will
flash for 3 seconds when power is on.
Product Specification
Model: X1
Size: 90.3mm*110mm
Input:
5V
2A
,9V
1.67A
Output: 5W/7.5W/10W
Charging Distance: 4mm-6mm
Coils: 2 coils
Net Weight: 118g
Package
Contents
Wireless Charger Stand
x1
charging line
x1
Instruction book
x1
Attention
LED
indicator
flash 3s
charging line
(Micro USB)
LED
indicator flash 15s
②
When the phone is charged successfully, the
LED indicator will flash for 15 seconds then off
to keep the whole charging process
sleep-friendly.
1. Keep the charger away from water and other liquid is required.
2. Please make sure the power is cut off before you start to clean the charger.
3. Use the charger under temperature only between 0-45°C.
4. Do not drop the product or submit it to impact.
5. Dropping the product or submitting it to impact can cause the product
to malfunction.
6. Do not place the product in an area exposed to heal, direct sunlight,
dampness, moisture, rain, vibration, shock , dust or sand.
7. Do not place the product near any kind of magnet or expose it to
excessive vibration.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2018:08:16 14:48:47+08:00
Modify Date                     : 2018:08:16 14:48:47+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Author                          : PC-02
Creator                         : CorelDRAW X6
Title                           : 未命名 -1

EXIF Metadata provided by EXIF.tools