ShenZhen ShiYi Technology MA-2761 Bluetooth audio receiver User Manual BT adapter manual 130x90MM

ShenZhen ShiYi Technology Co.,Ltd. Bluetooth audio receiver BT adapter manual 130x90MM

User Manual

Charging1. Using the supplied USB cable, connect the small end to the mini USB input of the AUDIO RECEIVER.2. Connect the other end to the USB input on your PC, laptop or USB Power Charging source. The music receiver’s LED light will glow red during charging.3. When charging is complete, the red LED light will turn off. A full charge will provide up to 3 hours of use depending on conditions.Pairing1. To enter the pairing mode, press and hold the ON/OFF button for 3 seconds until both red and blue LED’s flash.2. Search for the words AUDIO RECEIVER on your mobile device. 3. Press the AUDIO DEVICE name on your phone to pair. (In the event the device asks for a code type 0000)4. The device should pair and a blue light will flash indicating successful pairing. Play Music1. For your home and/or car music device, use the supplied audio cable and adaptors. Connect the music receiver to the AUX input of your home or car stereo.2. Music devices that are connected will automatically turn on when playing music through the device. 3. Make sure your device is no more than 10’ away from the AUDIO RECEIVER. In certain cases where there are walls and metal objects between the music player and AUDIO RECEIVER, the range may be shorter. 4. Always check your device to make sure the volume is turned up and not in mute mode.
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. *RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Navigation menu