ShenZhen ShiYi Technology MA-2761 Bluetooth audio receiver User Manual BT adapter manual 130x90MM
ShenZhen ShiYi Technology Co.,Ltd. Bluetooth audio receiver BT adapter manual 130x90MM
User Manual
Charging
1. Using the supplied USB cable, connect the small end
to the mini USB input of the AUDIO RECEIVER.
2. Connect the other end to the USB input on your PC,
laptop or USB Power Charging source. The music
receiver’s LED light will glow red during charging.
3. When charging is complete, the red LED light will turn
off. A full charge will provide up to 3 hours of use
depending on conditions.
Pairing
1. To enter the pairing mode, press and hold the
ON/OFF button for 3 seconds until both red and blue
LED’s flash.
2. Search for the words AUDIO RECEIVER on your
mobile device.
3. Press the AUDIO DEVICE name on your phone to
pair. (In the event the device asks for a code type 0000)
4. The device should pair and a blue light will flash
indicating successful pairing.
Play Music
1. For your home and/or car music device, use the
supplied audio cable and adaptors. Connect the music
receiver to the AUX input of your home or car stereo.
2. Music devices that are connected will automatically
turn on when playing music through the device.
3. Make sure your device is no more than 10’ away from
the AUDIO RECEIVER. In certain cases where there are
walls and metal objects between the music player and
AUDIO RECEIVER, the range may be shorter.
4. Always check your device to make sure the volume is
turned up and not in mute mode.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation..
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body