ShenZhen YuanYun technology Y8 Bluetooth Stereo Headset User Manual Y8USERGUIDE

ShenZhen YuanYun technology Co., Ltd. Bluetooth Stereo Headset Y8USERGUIDE

15_Y8 UserMan

132Listen ResponsiblyTo avoid hearing damage, make sure that the volume on your music player islistening level. Noise levels are measured in decibels (dB), exposure to anynoise at or above 85 dB can cause gradual hearing loss. Monitor your use;Use ResponsiblyIt’s dangerous to drive while wearing headphones, and in many places, illegalbecause it decreases your chances of hearing life-saving sounds outside ofyour vehicle, such as another car’s horn and emergency vehicle sirens. Pleaseavoid wearing your headphones while drivingCHARGING THE HEADPHONESUse the USB to 3.5mm charging cable and connect headphones to you computer oradaptor device made for USB charging. A red LED indicator will turn on when the headphone are charging and A blue LED indicator will turn on when the headphoneare fully charged.2. Volume Up / Forward3. Volume Down / Previous4. 3.5mm jack 5. LED indicatorPAIRING1. Make sure your phone, computer or music device is turned on andwithin 1 meter of each other.search for Bluetooth devices (Discoverable).4. Select ‘Y8’ from the list of found devices.5. If necessary, enter passcode ‘0000’ to pair and connect theheadphones to your device.secondsPLAYBACK / CONTROLSCALLS1)3. To re-dial the last number,click the buon(1) twice4. To reject a call, press and hold down buon(1) for 2 seconds when a call inPOWER ONPOWER OFFUsing headphones in Passive Mode (Wired)and the other end to your phone or device.Bluetooth Version: Bluetooth V 4.0Effecve transmission range: 10 mBaery: 250mAh Li-Polymer baeryCharging me: <2.5 hours Playing me: >12 hoursStandby me: >30 daysLED status: Blue LED for power and BT statusRed LED for charging status Diameter of driver unit: 40 mmFrequency range:Sensivity @1KHz 20 Hz ~ 20 kHz 95 +/-3 dBImpedance: 32 +/-15 % ΩDistoron: ≤1 % bei 1 KHzRated power input: 10 mWNet weight: Approx. 126 gACCESSORIESUSB to 3.5mm charging cable3.5mm audio cableInstruson ManualQuick Start GuideSPECIFICATIONS123452. Click (buon2) twice to skip forward to next track. press and hold down buon toincrease volume.3. Click (buon3) twice to go back to previous track. press and hold down buon todecrease volume.Press and hold the Mulfuncon buon (1) to turn the headphones off.The red LED on when headphones are off.Press and hold the Mulfuncon buon (1) to turn the headphones on.The blue LED on when headphones are on.NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protecon against harmful interference in aresidenal installaon. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separaon between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modificaons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operaon.FCC ID: 2AEXIY8

Navigation menu