Shiji Technology Z5GPS1080PA RC Quadcopter User Manual

Guangdong Shiji Technology Co.,Ltd RC Quadcopter Users Manual

Users Manual

In order to make sure that it meets the requirement of the electromagnetic environment of the aviation radio station, flying within the scope of 10 kilometers on each side by taking the airport runway center line as the middle line is HIGHLY FORBIDDEN or flying within the scope of 20 kilometers by taking both ends of the runway as the center is HIGHLY FORBIDDEN. Flying on the route of the airline is also PROHIBITED. Stop using all kinds of flying models or unmanned Quad-rotors in the AREA that prohibited by related authority or department of our country.ULTRAPORTABLE AND FOLDABLE
CONTENTSPREFACE -------------------------------------------------------------------------- 1WARNING ------------------------------------------------------------------------- 2FLY SAFETY --------------------------------------------------------------------- 5TRANSMITTER FUNCTIONS --------------------------------------------- 6AIRCRAFT DIAGRAM -------------------------------------------------------- 71.ASSEMBLE THE PROPELLER ----------------------------------------- 72.INTELLIGENT FLIGHT BATTERY ------------------------------------ 73.CHARGING THE BATTERY --------------------------------------------- 8USING THE TRANSMITTER ----------------------------------------------- 9FLIGHT ------------------------------------------------------------------- 9 10 11COMPASS CALIBRATION ----------------------------------------------- 10WAY POINT FLIGHT -------------------------------------------------------- 12POINT OF INTEREST ------------------------------------------------------- 12PRODUCT FUNCTIONS PROFILE ------------------------------------- 131. TAKE OFF/LANDING/EMERGENCY STOP ------------------- 132.FOLLOW ME ---------------------------------------------------------------- 133.ACTIVE TRACK ------------------------------------------------------------ 144. HAND GESTURE --------------------------------------------------------- 145.RETURN TO HOME ------------------------------------------------------ 146.HEADLESS MODE -------------------------------------------------------- 157.TRIM --------------------------------------------------------------------------- 16DOWNLOAD THE “SJ GPS PRO” APP ----------------------------- 16APP FUNCTIONS ------------------------------------------------------- 16 17CAMERA FUNCTIONS ---------------------------------------------------- 20COMMON PROBLEMS AND SOLUTIONS ------------------------ 21
Thank you for purchasing the SJ-Series GPS Drone. Please read all instructions and warnings carefully before operating. Please also keep this instruction manual for future reference and maintenance.IMPORTANT:1. This product is not a toy. It is a precision device; integrating machinery and electronics with air mechanics and high frequency transmission. It requires correct assembly and debugging to avoid any accident. The user should operate and control this product in a safe manner. In case of incorrect operation, it may cause serious injury or damage property. It can also be lost due to incorrect operation.2. This product is suitable for experienced UAV pilots no less than 14 years of age.3. In the event of a problem during using, operating, or maintenance, please contact the local sales agent or retailer or keep in touch with the responsible staff of our company.SAFETY PRECAUTIONS:This R/C drone can be dangerous when in use, please make sure you keep it far away from any persons or spectators when flying. In-correct installation, poor conditions, or users not familiar with operation may cause damage to the aircraft or injure people or may cause an unexpected accident. Please pay close attention to flying safety and learn to recognize more dangerous conditions which may cause an accident due to your own negligence.1. Keep it far away from any structures or crowds. This R/C drone may vary slightly in speed or sensitivity while flying and can cause potential danger. Therefore, please keep it far away from crowds, buildings, trees, structures, high-voltage wire, etc. Please also avoid flying in adverse weather conditions such as rain, electrical storms, and high winds to ensure safety of the user, any spectators, and surrounding property.2. Keep it away from any moist environment. The inside of the drone is composed of many precision electronic and mechanical parts. Therefore, please try to avoid any moisture or water content from entering the main body of the aircraft as it may cause a breakdown of the mechanical and electronic parts and thus cause an accident.3. Only operate with included parts for intended use. Please use the original parts made by SJ-Series for any re-equipping or maintenance to ensure flying safety. Please operate and use only under the scope of the product function permitted. Using un-approved parts will void warranty.DO NOT use for any illegal purpose or use beyond the scope of which your local laws and regulations have stipulated. 1PREFACE
4. Avoid controlling it independently. New users may have certain difficulties during the early stages of learning to operate this aircraft. Please try to avoid operating the aircraft alone. When available, always operate this aircraft under the guidance of a more experienced user.5. Do not operate under the influence of drugs or alcohol. Please operate this R/C drone according to your own state and flying skill. Any fatigue, bad mental state, or incorrect operation may increase the probability of accidental risk.6. Please keep a safe range from aircraft when using top speed. When the operator is flying in high speed, please keep the aircraft far from the pilot and any surrounding persons or objects so as not to cause danger or damage.7. Store it in a cool, dry place. The R/C drone is composed of material such as metal, fiber, plastic, electronics, etc. Therefore, please keep it away from any heat source and avoid prolonged exposure to direct sunlight. Excessive heat exposure can cause distortion and damage.• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.• Please note that changes or modifications not expressly approved by the party responsible for compliance could void the use’s authority to operate the equipment. 2
WARNING1. There is important information contained in this package and instruction manual, please keep it for future reference.2. You have the responsibility to make sure that this model of aircraft won’t cause injury to others’ body or cause any damage to property.3. Please operate strictly as shown on the instruction manual when debugging or assembling this drone. During the process of flying or landing, please pay more attention to keep 1-2 meters between the user and the aircraft to avoid colliding to the head or face or body, which may cause injury.4. Our company and distributors won’t be responsible for any incorrect operation, which may cause loss or damage or injury to the body.5. Children ages 14 and up should use this product under the guidance of an adult. This product is FORBIDDEN to be used by children under 14 years old.6. Please correctly assemble and use this product as shown on the instruction manual or packing instruction. Some parts should be assembled by an adult. 7. Small parts are included with this product. Please place it beyond the reach of the children to avoid a CHOKING HAZARD or parts being mistakenly swallowed.8. Playing on the road or near high traffic areas is strictly FORBIDDEN so as not to cause an accident. 9. Please dispose of the packing material timely so as not to cause injury to children.10. Please DO NOT disassemble or re-equip the aircraft as it may cause a breakdown of the aircraft during flying.11. Batteries in the battery compartment of the charger should be inserted into the designated power source which has the same logo as the product.12. Built-in rechargeable 3.7V lithium polymer battery included in the transmitter.13. Only the original charger made from our factory can be used.14. Charger is not a toy.15. When charging the battery, please conduct it under the surveillance of an adult. Please also keep it far away from any combustible object when charging. Please keep this aircraft within eyesight when charging.16. Please DO NOT make it short-circuited or squeeze the battery so as not to cause an explosion.17. DO NOT mix the Li-ion battery with a different type of battery.18. Intelligent lithium battery is loaded in the Quad-rotor. Both built-in or external can be used for charging.19. Please DO NOT make the battery short-circuited or decompose the battery or throw the battery into the fire; DO NOT place the batteries near the high temperature or heated area (such as near the fire or near the electric heating device). 3
WARNING: CHARGING OF THE DRONE BATTERY MUST BE SUPERVISED AT ALL TIMES BY AN ADULT. UNPLUG THE BATTERY WHEN FULLY CHARGED. DO NOT OVER-CHARGE THE BATTERY. 420. The drone should be kept far away from any other electric compliance or equipment as far as possible or kept far away from the place where having the magnetic object nearby as they may cause interference with each other.21. Please keep the safe distance from the high-speed rotating rotor so as not to cause twisted or danger of being wounded or being cut.22. Engine will heat up. Please DO NOT touch it to avoid being burned or injured.23. Please DO NOT close this product to your ear as it may cause injury to your hearing.24. Mini USB 5V wall charger recommended for charging. DO NOT use any charger stronger than 5V.25. To comply with the command of the magnetic environment requirement formulated by the Aviation Radio Bureau and the related authority, during the regulated period in certain areas, please stop using the transmitter of this model when such regulation command is issued.26. Keep your UAS within sight.27. Never fly over groups of people.28. Never fly over stadiums or sports events.29. Understand airspace restrictions and requirements. WARNING: Product should only be used by adults and children 14 years and older.Adult supervision required for children under 14 years of age.
5Maintain Lineof SightStrong GPSSignalFLY SAFETYFly in OpenAreasAvoid flying over or near obstacles, crowds, high voltage power lines, trees,airport or bodies of water.DO NOT fly near strong electromagnetic sources such as power lines andbase stations as it may affect the onboard compass.DO NOT use the drone in adverse weather conditions such as rain, snow, fog and wind speeds exceeding 10 m/s or 22 mph.Fly Below400 feet (120 m)Stay away from the rotatingpropellers and motors.No Fly ZoneIt’s important to understand basic flight guidelines, for the safety of both youand those around you. Don’t forget to read the Safety Guidelines before flight.
61. Full charging:Green light2. Charging:Red light3. Power light:White4. Return home5. Speed6. Photo/Video7. Headless mode/Trim135 6427 89 10 1. Throttle stick 2. Direction stick 3. Click one button Return home 4. Click-"DI"sound-Power on; Press once, then hold the button for 2 seconds --“DI”sound-- Power off 5. Click Headless mode; Hold the button for 3 seconds to turn off GPS mode 6. One button take off with auto hover; One button landing; Hold the button for 3 seconds for Emergency stop 7. Click the button to take photo; Press the button to enter the trim mode (Note: No need to trim under the GPS MODE) 8. Click the button to take video 9. Speed+/Speed-10. Adjust the angle of camear: Spin button down: Camera down; Spin button up: Camera up.TRANSMITTER FUNCTIONS14 65 72 3There is a buckle on the antenna, please follow the PIC.1 to open the antenna.PIC.1
712345123ABBALow Electricity High1. HD Camera2. Propeller3. Motor4. LED indicator5. Intelligent battery1. Battery switch2. Battery power indicator3. USB charging port2. INTELLIGENT FLIGHT BATTERYAIRCRAFT DIAGRAM 1. ASSEMBLE THE PROPELLERPlease note that the letter “A” or “B” is printed on each propeller, and make sure all the propellers are attached in the correct motor position.— Short press the power button at once and then long press the power button to turn on the quadcopter. Long press the power button for 3 seconds to turn off. — Once the battery is in a low power state, the blue power indicator will start flashing. At this time, please fly back the quadcopter immediately and charge the battery to avoid unnecessary losses.
8Phone adapter:5V 2A(Not included)4. LITHIUM BATTERY CHARGING INSTRUCTIONS1. Balanced charging: If the power switch of the quad-copter is on the state ON / OFF, the Quad-copter can be charged. Insert the USB cable into the USB port of a computer, and then connect with the charging port of the drone, when charging, the indicator on the aircraft will become Blue blinking when in charging; when fully charged, the indicator on the aircraft will turn to solid blue.2. Quad-copter can be charged by the mobile power or car-loaded power.3. Full charging time takes about 110 minutes, Flight time about 15 minutes.4. Remote lithium battery Full charging time takes about 50 minutes.(When in charging, the indicator on the transmitter become Red; when fully charged, the indicator on the transmitter will turn to solid Green). 3. CHARGE THE BATTERYPress the buckle and Pull out the Battery from the drone.Tip: When the transmitter is in low power, the power indicator light on the transmitter will keep flashing, you need to charge the transmitter this time. Charging time:About 110 minutes(Depending onCharging Power)Charging timeof the transmitter:About 50 minutes
9SJ-GPS PRO_XXXXREMOTE CONTROL OPERATING METHODThrottle JoystickThrottle JoystickDirection JoystickTurn LeftUPDOWNTurn RightForwardLeftRightBackwardFLIGHTStep 1: Turn on the drone and set down on a level surface— The drone will auto-trim to this level surface.— All lights blingking red.— Power on the transmitter, push the left joystick up then down to pair with the drone.— Lights flashing blue (back) and white (front). Paring successfully.— NOTE: You connect to the WIFI at this time to view the current drone on the SJ GPS PRO App,or wait until after GPS is calibrated.Step 2: Turn on the remote controlStep 3: Connect APP— Connect your smart phone to the WIFI of Drone and check the drone’s status on the “SJ-GPS PRO_XXXX APP.
23COMMON PROBLEMS AND SOLUTIONSDrone lights flashing andno response from the dronewhen operating. The blades spin, but thedrone cannot takeoff.The quadcopter shakesheavily.Drone cannot stay balancedin flight.Drone is unstable aftercrashing.1. The blades distorted.2. The motor doesn’t work properly.Three-axis accelerationsensor loses it’s balance after crashing. 1. Insufficient battery power.2. The blades distorted.The blades distorted. Replace the blades.1. Replace the blades.2. Replace the motor.Restart and re-calibrate the drone. 1. Remote is not synced to the drone.2. Insufficient battery power. 1. Refer to the Quick Start guide and re-sync the drone.2. Recharge the battery. 1. Recharge the battery.2. Replace the blades.THE PROBLEM REASON COUNTERMEASURES
10FrontFront1. Compass Calibration Part 1— Push the joysticks into the 1 & 11 o’clock position.— Lights rapid-blinkingBlue/red (back) and White/red(front).— App drone status: “Compass calibration”.Step 4: Compass Calibration2. Compass Calibration Part 2— Keeping the drone level, pick up he drone from the back and rotate your body in one full circle (360°).— Back lights will turn to solid blue.3. Compass Calibration Part 3— From the bottom, hold the drone vertically and camera is facing to the ground, rotating your body in one full circle(360°).— Front lights will turn to solid white.— App drone status: “Compass calibration okay”.— Push the joysticks into the 11 & 1 o’clock position.— Lights rapid-blinking blue (back) and white (front).— App Drone Status: “Gyroscope is being calibrated” “Gyroscope okay”.Step 5: Reset to factory Setting/Calibrate GyroscopeStep 6: GPS Serching (DO NOT use GPS Mode indoor)— Set the drone back down to level surface.— Lights return to rapid-blinking blue (back) and white (front) --This means the drone is searching the GPS signal.— This process can take a few minutes.— App Drone status: “Waiting for GPS signal”.
11— Push the joysticks into 5 & 7 o’clock position.— Motors are starting automatically, push the left joystick to take off; or short pressing to take off.NOTE: Starting the motors should be set before the drone take off.— Stopping Motors:1. Pushing the joysticks into 5 & 7 o’clock position again, motors stop working.2. The motors will stop woring if the motors starting are not operated after 20 seconds.Starting/Stopping motorsOnce the lights have switched to all solid, you are ready to fly!— Blue (back) and white (front) lights are all solid (no blinking).— App Drone Status: “Ready to fly”. — Firstly press then pressing at the same time --- “DI” ”DI” sounds means now the Right Joystick change to the throttle stick. Turn off the transmitter and turn on again, Left Joystick is thethrottle stick.Dual Remote Controller ModeNote: When the aircraft in the indoor environment with weak GPS signal, lights rapid-blinking -- Blue(back) + White (front); Press to turn off GPS mode, and the aircraft can be operated under the normal mode, now all the GPS functions will be cancelled.UPDOWNTurn LeftTurn RightForwardLeftRightBackwardLeft Stick Right Stick
121. Hovering the aircraft around the center point.2. Press “ + ”on the transmitter at the same time.3. Moving and setting the aircraft surround radius range (within 2 meters-10 meters)by the Direction Joystick.4. Press “ + ” on the transmitter at the same time again, then the aircraft starts to fly arround according to the radius range you set in STEP 2 (Note: If the surround radius range less than 2 meters, the aircraft will fly to 2 meters automatically) . Move the Direction Joystick to cancel the Point of Interest mode. NOTE: Press “ + ” on the transmitter at the same time, Point of Interest Function” can be activated if the aircraft and transmitter sucessfully paired and the aircraft flies up . WAY POINT FLIGHT— Firstly, make sure to download and save the local map in your smart phone, then you can start the Way point flight.— Successfully connect the aircraft WIFI with your smart phone, click on the App, then you can find a RED CIRCLE(LIMITTED FLIGHT RANGE)/TAKE- OFF POSITION/AIRCRAFT CURRENT POSITION on the map, mark the points (16 points at most) you plan to fly within the RED CIRCLE range on the map. If you would like to reset the points or flight path, click or . Click ,confirm to start Way Point Flight. Pushing the Right Joystick to cancel the Way Point Flight Function.Delete singleSendDelete allWaiting for GPS Signal D:00 H: 0.0 DS: 0.0 VS: 0.0Ｌｏｃａｔｉｏｎ２ＤＥＥＥDelete single SendDelete allPOINT OF INTEREST
When the Follow Me function activated, the drone will follow the GPS in your smart phone to follow you wherever you go. (Make sure the smart phone connect with the aircraft successfully, turn on APP on your smart phone.)1. Make sure the aircraft flies 3 meters away ,30 meters height position.2. Click on the APP interface.3. Waiting for APP Drone Status to display “Follow Me ready”--- the aircraft will follow the phone’s coordinates.4. Click the on the APP interface again to exit the Follow Me mode.131. TAKE-OFF/LANDING/EMERGENCY STOPAbout 5 feetRotating propellers can be dangerous. DO NOT start the motors whenthere are people nearby. Press , the propellers will spin and the drone will take off at an altitude of about 5 feet. (Always keep the head of drone facing forward).Press , the drone will land automatically. Remember to alwayskeep your hands on the transmitter as long as the motor is still pinning.Only stop motors mid-flight in emergency when doing so can reducethe risk of damage or injury.Hold 3 secs for EMERGENCY STOP.2. FOLLOW-MECommon lssues:Follow Me mode would be hardly activated If phone’s GPS signal is too weak, This could be due to the signal loss from surrounding buildings, trees, or congestion from too many mobile phones in the area.* Use in open area and be mindful of your surroundings. Drone is NOT equipped with obstacle avoidance.PRODUCT FUNCTION PROFILE
Click , choose , tap on the object or person you want to track, and tap to confirm your selection.(NOTE: Make sure the size of the frame you mark is the same as the object or person you tap,the frame should not be too large.）14②. Low-Battery return to home③. Fail connection RETURN-TO-HOME (RTH)①. Smart Return To Home3. ACTIVE TRACK5. RETURN-TO-HOME (RTH)4. HAND GESTUREClick on the APP, follow the TIP on the APP(PIC.1):NOTE: Hand gesture should use the RIGHT HAND to start.The Return to Home (RTH) function bring the drones back to the Take Off Point.This function only can be achieved under GPS mode.There are 3 types of RTH: Smart RTH/Low-battery RTH/Fail connection RTHPress the Return to Home Button on your Transmitter or tap on the App of your smart phone, and the transmitter will start beeping. Your drone will return to the TAKE OFF Point. Press the button again to stop RTH procedure. Pull the throttle down to land the drone in a safe area. Low-Battery RTH is triggered when the Flight Battery level is low, When Low-Battery RTH is activated, the drone will fly back to where away from you about 100 feet, and you can still control your drone. Pull the throttle down to land the drone in a safe area. When the power of drone is completely empty, drone will return to the TAKE OFF point where you set.Drone will enter Return to Home Mode if the signal to the transmitter is lost. Rebind the transmitter to the drone if dronr flies back into your view. Pull the throttle down to land the drone at safe area.WARNING:This drone is NOT equipped with obstacle-avoidance.RTH Button The app´s RTH Button
156. HEADLESS MODE1. It defaults the Normal Mode when the quadcopter and remote control are matched sucessfully, click , enter into Headless mode; click again, exit the Headless mode.2. Normal mode: Before take-off, the white lights on the quadcopter where they are heading is the forward direction.3. Headless mode: Before take-off, the white lights on the quadcopter where they are heading is the forward direction .(When the quadcopter rotates in flight,the flight direction will not be changed).The direction of control when the drone is paired.Don’t turn your direction. Don’t turn your direction.Under Headless Mode, the forward direction is the direction the pilot faceswhere the pilot pairs the drone with the transmitter. If the pilot pushes thedirection joystick forward the drone will fly forward. If the pilot pushes thedirection joystick backward, the drone will flight towards him/her. If the pilot moves the right stick left or right, then the drone will also move left or right relative to you. It is very important that the pilot does not change positions or the direction he or she is facing because this will cause confusion on the drone.
Waiting for GPS Signal D:00 H: 0.0 DS: 0.0 VS: 0.0If the drone flies under NO GPS Mode, you can trim the drone to obtain more balanced flight. Press for 3 seconds, and you will enter the trim mode. Push the direction stick to the opposite side that the drone drifts to rebalance the drone. For example, if the drone drifts to the left, push the direction stick to the right to make the drone balanced. Press again to exit the TrimMode.167. TRIM UNDER NO GPS MODE- Connect the power of this model, and then access into “SETTING” in the mobile phone, open the “WIFI” and find the “SJ-GPS PRO_XXXX”. When the link is successfully connected, please exit the “Setting” option. - Open “SJ-GPS PRO” software in the mobile to access into the control interface.QR code of “SJ-GPS PRO” software for Apple IOS system (Please scan this QR code to install this software).QR code of “SJ-GPS PRO”software for Android system (Please scan this QR code to install this software).DOWNLOAD THE SJ GPS PRO APP1. APP INTRODUCTIONWait until the Drone Status says “Ready to Fly” before initiating flight. This will ensure that your GPS is synced and your drone is ready to fly.
17Way Point FlightRemote Battery Drone BatteryFlight SettingFlip ScreenVR Split ScreenFlight RecordControls ON/OFFGPS SignalBack to Main MenuMedia GalleryAuto LandingAuto Take-offReturn HomeActive TrackFollow MeDrone StatusDistance (meters)Height (meters)Speed (meters/sec)Hand GestureTake VideoTake PhotoSound Recording
Waiting for GPS Signal D:00 H: 0.0 DS: 0.0 VS: 0.02017-12-28照片 视频 NOAirDrop. Tap to turn on WLAN and Bluetooth toshare with AirDrop.2017-12-28Photo VideoNO2017-12-28Photo VideoNO182. APP ONE KEY SHARE FUNCTION1. Open the APP, click , enter into the file (Pic 1.)2. Click once or press to choose the photos which will be shared,click , choose the platforms that need to be shared(Pic 3).Reminder: You can share 1 picture or 9 pictures at the same time.But you can only choose one video for sharing each time.Pic. 3Pic. 2Pic. 1Check all Share Save to thephone albumDelete
Waiting for GPS Signal D:00 H: 0.0 DS: 0.0 VS: 0.0193. HOW TO SEARCH THE LOST DRONE②.The last position of lost aircraft will be appeared on the MAP.Current position of the mobile phone①.Continue to click 3 times to open the MAP surface to search the drone.
20Press on the Transmitter or tap on APP, the red indicator on camera will flash once, indicating the camera takes one photo.Press on the Transmitter or tap on APP, the red indicator will keep flashing, indicating the camera is taking video.Press again to save the video.DO NOT take photo during taking video.TFFlight SettingOn APP３０３０２５Flight parameter settingsBEGINNER Off after the custom mode, the default novice modeFlight distance Default 30m, (20-500m)Flight altitude Default 30m, (10-120m)Cruise-in altitudeRemark: Return altitude shall not be greater than flight!SaveDefault 25m, (10-120m)4. FLIGHTThe Default GPS Mode is BEGINNER MODE, Under BEGINNER MODE:1.Flight Distance is limited between 0-30 M.2.Flight Altitude is limited between 0-30 M.3.RTH Altitude is under 25 M.You can Turn-off the BEGINNER MODE to modify the parameters in the APP on your phone.CAMERA FUNCTIONSTake PhotoTake VideoICON ON APPNOTE: When using the ”SJ-GPS” app, the original photos and videos will be compressed and saved to smartphone.The Original images and videos are saved in the TF card. Press the TF card slightly to take it out, then insert the card into the card reader and insert into the USB outlet of a computer to read the data from TF card.The images can be also viewed in the App.TF CARD (Sold seperated)
21SPECIFICATIONS● Drone● Camera Controllable Range: Pitch: -90° to 0° MODEL: Z5Weight (Including Battery): 242g/8.5 ozFlight Time: About 15 minutesWIFI Distance: 100-150m/300~400m (Outdoor and unobstructed, depend on conditions and mobile device)Motor Model: 1020Hovering: EnabledOperating Temperature Range: 32° to 104° F ( 0° to 40° C)Satellite Systems GPS / GLONASSDimensions: Open 300mmX290mmX65mm Fold 145mmX100mmX65mmLens: FOV 90°/2.0Still Photography Modes: Single shotVideo Recording Modes: HD 1280x720P / HD 1920x1080P (Depend on conditions and mobile device)Photo: JPEGVideo: AVISupported SD Cards: TF Card 8GB (not included)Operating Temperature: 32° to 104° F ( 0° to 40° C )● APP / Live View● USB CableMobile App: SJ-GPS PROLive View Working Frequency: 2.4 GHz ISMLive View Quality: 720P @ 25fps / 1080P @ 25fps (Depend on conditions and mobile device)Latency: Low Latency Video (depend on conditions and mobile device)Required Operating Systems: iOS 8.0 or later / Android 4.4.4 or laterRecommended Devices: 4.7˝ to 5.5˝ Smart phonesVoltage: 5V 2ARated Power: ≤10 W
In order to make sure that it meets the requirement of the electromagnetic environment of the aviation radio station, flying within the scope of 10 kilometers on each side by taking the airport runway center line as the middle line is HIGHLY FORBIDDEN or flying within the scope of 20 kilometers by taking both ends of the runway as the center is HIGHLY FORBIDDEN. Flying on the route of the airline is also PROHIBITED. Stop using all kinds of flying models or unmanned Quad-rotors in the AREA that prohibited by related authority or department of our country.ULTRAPORTABLE AND FOLDABLEBlade X4Instructions X1Screw driver X1Screw X8USB cableOnly for chargingPARTS LIST (Included)22● TransmitterOperating Frequency: 2.4 GHzCapacity: 300 mAhOperating Voltage: 3.7VMax transmission distance: About 600m (Outdoor and unobstructed)Max Charging Time: About 50 minutes (Depending on Charging Power)Flight Time: About 10 HoursMobile Device Holder: 4.7˝ to 5.5˝ Smart PhonesOperating Temperature: 32° to 104° F ( 0° to 40° C ) ● Flight BatteryCapacity: 1200 mAhVoltage: 7.4VBattery Type: LipoEnergy: 8.88WhNet Weight: 66 g / 2.3 ozMax Charging Power: 5-7.5WMax Charging Time: About 110 minutes (Depending on Charging Power)Charging Temperature Range: 14° to 104° F ( -10° to 40° C )

Navigation menu