Shiji Technology Z5GPS1080PA RC Quadcopter User Manual

Guangdong Shiji Technology Co.,Ltd RC Quadcopter Users Manual

Users Manual

Download: Shiji Technology Z5GPS1080PA RC Quadcopter User Manual
Mirror Download [FCC.gov]Shiji Technology Z5GPS1080PA RC Quadcopter User Manual
Document ID4056060
Application IDE+AV4SpqowDnsnoclWLuLg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize300.96kB (3762038 bits)
Date Submitted2018-11-01 00:00:00
Date Available2018-11-01 00:00:00
Creation Date2018-09-21 17:32:28
Producing SoftwareAdobe PDF library 10.01
Document Lastmod2018-10-15 17:39:20
Document TitleUsers Manual
Document CreatorAdobe Illustrator CS6 (Windows)

ULTRAPORTABLE AND FOLDABLE
In order to make sure that it meets the requirement of the electromagnetic environment of the
aviation radio station, flying within the scope of 10 kilometers on each side by taking the airport
runway center line as the middle line is HIGHLY FORBIDDEN or flying within the scope of 20
kilometers by taking both ends of the runway as the center is HIGHLY FORBIDDEN. Flying on
the route of the airline is also PROHIBITED. Stop using all kinds of flying models or unmanned
Quad-rotors in the AREA that prohibited by related authority or department of our country.
CONTENTS
PREFACE -------------------------------------------------------------------------- 1
WARNING ------------------------------------------------------------------------- 2
FLY SAFETY --------------------------------------------------------------------- 5
TRANSMITTER FUNCTIONS --------------------------------------------- 6
AIRCRAFT DIAGRAM -------------------------------------------------------- 7
1.ASSEMBLE THE PROPELLER ----------------------------------------- 7
2.INTELLIGENT FLIGHT BATTERY ------------------------------------ 7
3.CHARGING THE BATTERY --------------------------------------------- 8
USING THE TRANSMITTER ----------------------------------------------- 9
FLIGHT ------------------------------------------------------------------- 9 10 11
COMPASS CALIBRATION ----------------------------------------------- 10
WAY POINT FLIGHT -------------------------------------------------------- 12
POINT OF INTEREST ------------------------------------------------------- 12
PRODUCT FUNCTIONS PROFILE ------------------------------------- 13
1. TAKE OFF/LANDING/EMERGENCY STOP ------------------- 13
2.FOLLOW ME ---------------------------------------------------------------- 13
3.ACTIVE TRACK ------------------------------------------------------------ 14
4. HAND GESTURE --------------------------------------------------------- 14
5.RETURN TO HOME ------------------------------------------------------ 14
6.HEADLESS MODE -------------------------------------------------------- 15
7.TRIM --------------------------------------------------------------------------- 16
DOWNLOAD THE “SJ GPS PRO” APP ----------------------------- 16
APP FUNCTIONS ------------------------------------------------------- 16 17
CAMERA FUNCTIONS ---------------------------------------------------- 20
COMMON PROBLEMS AND SOLUTIONS ------------------------ 21
PREFACE
Thank you for purchasing the SJ-Series GPS Drone. Please read all instructions
and warnings carefully before operating. Please also keep this instruction
manual for future reference and maintenance.
IMPORTANT:
1. This product is not a toy. It is a precision device; integrating machinery and
electronics with air mechanics and high frequency transmission. It requires
correct assembly and debugging to avoid any accident. The user should
operate and control this product in a safe manner. In case of incorrect
operation, it may cause serious injury or damage property. It can also be lost
due to incorrect operation.
2. This product is suitable for experienced UAV pilots no less than 14 years of
age.
3. In the event of a problem during using, operating, or maintenance, please
contact the local sales agent or retailer or keep in touch with the responsible
staff of our company.
SAFETY PRECAUTIONS:
This R/C drone can be dangerous when in use, please make sure you keep it
far away from any persons or spectators when flying. In-correct installation,
poor conditions, or users not familiar with operation may cause damage to the
aircraft or injure people or may cause an unexpected accident. Please pay close
attention to flying safety and learn to recognize more dangerous conditions
which may cause an accident due to your own negligence.
1. Keep it far away from any structures or crowds.
This R/C drone may vary slightly in speed or sensitivity while flying and can
cause potential danger. Therefore, please keep it far away from crowds,
buildings, trees, structures, high-voltage wire, etc. Please also avoid flying in
adverse weather conditions such as rain, electrical storms, and high winds
to ensure safety of the user, any spectators, and surrounding property.
2. Keep it away from any moist environment.
The inside of the drone is composed of many precision electronic and
mechanical parts. Therefore, please try to avoid any moisture or water content
from entering the main body of the aircraft as it may cause a breakdown of
the mechanical and electronic parts and thus cause an accident.
3. Only operate with included parts for intended use.
Please use the original parts made by SJ-Series for any re-equipping or
maintenance to ensure flying safety. Please operate and use only under the
scope of the product function permitted. Using un-approved parts will void
warranty.
DO NOT use for any illegal purpose or use beyond the scope of which your local
laws and regulations have stipulated.
4. Avoid controlling it independently.
New users may have certain difficulties during the early stages of learning
to operate this aircraft. Please try to avoid operating the aircraft alone.
When available, always operate this aircraft under the guidance of a more
experienced user.
5. Do not operate under the influence of drugs or alcohol.
Please operate this R/C drone according to your own state and flying skill.
Any fatigue, bad mental state, or incorrect operation may increase the
probability of accidental risk.
6. Please keep a safe range from aircraft when using top speed.
When the operator is flying in high speed, please keep the aircraft far from
the pilot and any surrounding persons or objects so as not to cause danger
or damage.
7. Store it in a cool, dry place.
The R/C drone is composed of material such as metal, fiber, plastic,
electronics, etc. Therefore, please keep it away from any heat source and
avoid prolonged exposure to direct sunlight. Excessive heat exposure can
cause distortion and damage.
• NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interfer-ence to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Please note that changes or modifications not expressly approved by the party
responsible for compliance could void the use’s authority to operate the
equipment.
WARNING
1. There is important information contained in this package and instruction
manual, please keep it for future reference.
2. You have the responsibility to make sure that this model of aircraft won’t
cause injury to others’ body or cause any damage to property.
3. Please operate strictly as shown on the instruction manual when debugging
or assembling this drone. During the process of flying or landing, please
pay more attention to keep 1-2 meters between the user and the aircraft to
avoid colliding to the head or face or body, which may cause injury.
4. Our company and distributors won’t be responsible for any incorrect operation,
which may cause loss or damage or injury to the body.
5. Children ages 14 and up should use this product under the guidance of an
adult. This product is FORBIDDEN to be used by children under 14 years old.
6. Please correctly assemble and use this product as shown on the instruction
manual or packing instruction. Some parts should be assembled by an adult.
7. Small parts are included with this product. Please place it beyond the reach
of the children to avoid a CHOKING HAZARD or parts being mistakenly
swallowed.
8. Playing on the road or near high traffic areas is strictly FORBIDDEN so as not
to cause an accident.
9. Please dispose of the packing material timely so as not to cause injury to
children.
10. Please DO NOT disassemble or re-equip the aircraft as it may cause a
breakdown of the aircraft during flying.
11. Batteries in the battery compartment of the charger should be inserted into
the designated power source which has the same logo as the product.
12. Built-in rechargeable 3.7V lithium polymer battery included in the transmitter.
13. Only the original charger made from our factory can be used.
14. Charger is not a toy.
15. When charging the battery, please conduct it under the surveillance of an adult.
Please also keep it far away from any combustible object when charging.
Please keep this aircraft within eyesight when charging.
16. Please DO NOT make it short-circuited or squeeze the battery so as not to
cause an explosion.
17. DO NOT mix the Li-ion battery with a different type of battery.
18. Intelligent lithium battery is loaded in the Quad-rotor. Both built-in or external
can be used for charging.
19. Please DO NOT make the battery short-circuited or decompose the battery
or throw the battery into the fire; DO NOT place the batteries near the high
temperature or heated area (such as near the fire or near the electric heating
device).
20. The drone should be kept far away from any other electric compliance or
equipment as far as possible or kept far away from the place where having
the magnetic object nearby as they may cause interference with each other.
21. Please keep the safe distance from the high-speed rotating rotor so as not
to cause twisted or danger of being wounded or being cut.
22. Engine will heat up. Please DO NOT touch it to avoid being burned or injured.
23. Please DO NOT close this product to your ear as it may cause injury to your
hearing.
24. Mini USB 5V wall charger recommended for charging. DO NOT use any charger
stronger than 5V.
25. To comply with the command of the magnetic environment requirement
formulated by the Aviation Radio Bureau and the related authority, during the
regulated period in certain areas, please stop using the transmitter of this
model when such regulation command is issued.
26. Keep your UAS within sight.
27. Never fly over groups of people.
28. Never fly over stadiums or sports events.
29. Understand airspace restrictions and requirements.
WARNING: Product should only be used by adults and children 14 years and
older.Adult supervision required for children under 14 years of age.
WARNING: CHARGING OF THE DRONE BATTERY MUST BE SUPERVISED AT
ALL TIMES BY AN ADULT. UNPLUG THE BATTERY WHEN FULLY CHARGED.
DO NOT OVER-CHARGE THE BATTERY.
FLY SAFETY
Fly in Open
Areas
Strong GPS
Signal
Maintain Line
of Sight
Fly Below
400 feet (120 m)
Avoid flying over or near obstacles, crowds, high voltage power lines, trees,
airport or bodies of water.
DO NOT fly near strong electromagnetic sources such as power lines and
base stations as it may affect the onboard compass.
DO NOT use the drone in adverse weather conditions such as rain, snow,
fog and wind speeds exceeding 10 m/s or 22 mph.
No Fly Zone
Stay away from the rotating
propellers and motors.
It’s important to understand basic flight guidelines, for the safety of both you
and those around you. Don’t forget to read the Safety Guidelines before flight.
TRANSMITTER FUNCTIONS
1. Throttle stick
2. Direction stick
3. Click one button Return home
4. Click-"DI"sound-Power on; Press
once, then hold the button for 2
seconds --“DI”sound-- Power off
5. Click Headless mode; Hold the
button for 3 seconds to turn off
GPS mode
6. One button take off with auto
hover; One button landing; Hold
the button for 3 seconds for
Emergency stop
10
7. Click the button to take photo;
Press the button to enter the trim
mode (Note: No need to trim
under the GPS MODE)
8. Click the button to take video
9. Speed+/Speed10. Adjust the angle of camear: Spin
button down: Camera down; Spin
button up: Camera up.
1. Full charging:Green light
2. Charging:Red light
3. Power light:White
4. Return home
5. Speed
6. Photo/Video
7. Headless mode/Trim
PIC.1
There is a buckle on the antenna, please follow the PIC.1 to open the antenna.
AIRCRAFT DIAGRAM
1. HD Camera
2. Propeller
3. Motor
4. LED indicator
5. Intelligent
battery
1. ASSEMBLE THE PROPELLER
Please note that the letter “A” or “B” is printed on each propeller, and make
sure all the propellers are attached in the correct motor position.
2. INTELLIGENT FLIGHT BATTERY
1. Battery switch
2. Battery power indicator
3. USB charging port
Low
Electricity
High
— Short press the power button at once and then long press the power button
to turn on the quadcopter. Long press the power button for 3 seconds to
turn off.
— Once the battery is in a low power state, the blue power indicator will start
flashing. At this time, please fly back the quadcopter immediately and
charge the battery to avoid unnecessary losses.
3. CHARGE THE BATTERY
Press the buckle and
Pull out the Battery from the drone.
Phone adapter:
5V 2A
(Not included)
Charging time:
About 110 minutes
(Depending on
Charging Power)
Charging time
of the transmitter:
About 50 minutes
Tip: When the transmitter is in low power, the power indicator light on the
transmitter will keep flashing, you need to charge the transmitter this time.
4. LITHIUM BATTERY CHARGING INSTRUCTIONS
1. Balanced charging: If the power switch of the quad-copter is on the state
ON / OFF, the Quad-copter can be charged. Insert the USB cable into the
USB port of a computer, and then connect with the charging port of the
drone, when charging, the indicator on the aircraft will become Blue blinking
when in charging; when fully charged, the indicator on the aircraft will turn
to solid blue.
2. Quad-copter can be charged by the mobile power or car-loaded power.
3. Full charging time takes about 110 minutes, Flight time about 15 minutes.
4. Remote lithium battery Full charging time takes about 50 minutes.
(When in charging, the indicator on the transmitter become Red; when fully
charged, the indicator on the transmitter will turn to solid Green).
REMOTE CONTROL OPERATING METHOD
Throttle Joystick
n Right
Tur
Turn Left
UP
DOWN
Forward
Left
Right
Direction Joystick
kw
Bac ard
FLIGHT
Step 1: Turn on the drone and set down on a level surface
— The drone will auto-trim to this level surface.
— All lights blingking red.
Step 2: Turn on the remote control
Throttle Joystick
— Power on the transmitter, push the left joystick up then
down to pair with the drone.
— Lights flashing blue (back) and white (front). Paring
successfully.
— NOTE: You connect to the WIFI at this time to view the
current drone on the SJ GPS PRO App,or wait until after
GPS is calibrated.
Step 3: Connect APP
SJ-GPS PRO_XXXX
— Connect your smart phone to the WIFI of Drone and check
the drone’s status on the “SJ-GPS PRO_XXXX APP.
COMMON PROBLEMS AND SOLUTIONS
THE PROBLEM
REASON
COUNTERMEASURES
1. Remote is not synced to
1. Refer to the Quick Start guide
Drone lights flashing and
the drone.
and re-sync the drone.
no response from the drone
2. Insufficient battery power. 2. Recharge the battery.
when operating.
The blades spin, but the
drone cannot takeoff.
1. Insufficient battery power. 1. Recharge the battery.
2. The blades distorted.
2. Replace the blades.
The quadcopter shakes
heavily.
The blades distorted.
1. The blades distorted.
Drone cannot stay balanced
2. The motor doesn’t work
in flight.
properly.
Drone is unstable after
crashing.
Three-axis acceleration
sensor loses it’s balance
after crashing.
23
Replace the blades.
1. Replace the blades.
2. Replace the motor.
Restart and re-calibrate the
drone.
Step 4: Compass Calibration
1. Compass Calibration Part 1
— Push the joysticks into the 1 & 11 o’clock
position.
— Lights rapid-blinkingBlue/red (back) and
White/red(front).
— App drone status: “Compass calibration”.
Front
2. Compass Calibration Part 2
— Keeping the drone level, pick up he drone
from the back and rotate your body in one
full circle (360°).
— Back lights will turn to solid blue.
Front
3. Compass Calibration Part 3
— From the bottom, hold the drone vertically
and camera is facing to the ground, rotating
your body in one full circle(360°).
— Front lights will turn to solid white.
— App drone status: “Compass calibration
okay”.
Step 5: Reset to factory Setting/Calibrate
Gyroscope
— Push the joysticks into the 11 & 1 o’clock
position.
— Lights rapid-blinking blue (back) and white
(front).
— App Drone Status: “Gyroscope is being
calibrated” “Gyroscope okay”.
Step 6: GPS Serching (DO NOT use GPS
Mode indoor)
— Set the drone back down to level surface.
— Lights return to rapid-blinking blue (back)
and white (front) --This means the drone
is searching the GPS signal.
— This process can take a few minutes.
— App Drone status: “Waiting for GPS signal”.
10
Starting/Stopping motors
— Push the joysticks into 5 & 7 o’clock position.
— Motors are starting automatically, push the
left joystick to take off; or short pressing to
take off.
NOTE: Starting the motors should be set before
the drone take off.
— Stopping Motors:
1. Pushing the joysticks into 5 & 7 o’clock position
again, motors stop working.
2. The motors will stop woring if the motors
starting are not operated after 20 seconds.
Once the lights have switched to all solid, you are ready to fly!
— Blue (back) and white (front) lights are all solid (no blinking).
— App Drone Status: “Ready to fly”.
Dual Remote Controller Mode
— Firstly press
then pressing
at the same
time --- “DI” ”DI” sounds means now the Right
Joystick change to the throttle stick. Turn off the
transmitter and turn on again, Left Joystick is the
throttle stick.
UP
Forward
n Right
Tur
Right
Turn Left
Right Stick
Left
kw
Bac ard
DOWN
Left Stick
Note: When the aircraft in the indoor environment
with weak GPS signal, lights rapid-blinking -- Blue
(back) + White (front); Press
to turn off GPS
mode, and the aircraft can be operated under the
normal mode, now all the GPS functions will be
cancelled.
11
WAY POINT FLIGHT
— Firstly, make sure to download and save the local map in your smart phone,
then you can start the Way point flight.
— Successfully connect the aircraft WIFI with your smart phone, click
on
the App, then you can find a RED CIRCLE(LIMITTED FLIGHT RANGE)/TAKEOFF POSITION/AIRCRAFT CURRENT POSITION on the map, mark the points
(16 points at most) you plan to fly within the RED CIRCLE range on the map.
If you would like to reset the points or flight path, click
or
Click
,confirm to start Way Point Flight. Pushing the Right Joystick
to cancel the Way Point Flight Function.
Delete single
Delete all
Send
Ｅ
Ｌｏｃａｔｉｏｎ
Ｅ
Ｅ
２Ｄ
Delete single
Waiting for GPS Signal
Delete all
Send
D:00 H: 0.0 DS: 0.0 VS: 0.0
POINT OF INTEREST
1. Hovering the aircraft around the center point.
2. Press “
”on the transmitter at the same time.
3. Moving and setting the aircraft surround radius range (within 2 meters-10
meters)by the Direction Joystick.
4. Press “
” on the transmitter at the same time again, then the
aircraft starts to fly arround according to the radius range you set in STEP
2 (Note: If the surround radius range less than 2 meters, the aircraft will fly
to 2 meters automatically) . Move the Direction Joystick to cancel the
Point of Interest mode.
NOTE: Press “
” on the transmitter at the same time, Point of
Interest Function” can be activated if the aircraft and transmitter
sucessfully paired and the aircraft flies up .
12
PRODUCT FUNCTION PROFILE
1. TAKE-OFF/LANDING/EMERGENCY STOP
About 5 feet
Rotating propellers can be dangerous. DO NOT start the motors when
there are people nearby.
, the propellers will spin and the drone will take off at an
Press
altitude of about 5 feet. (Always keep the head of drone facing forward).
, the drone will land automatically. Remember to always
Press
keep your hands on the transmitter as long as the motor is still pinning.
Hold
3 secs for EMERGENCY STOP.
Only stop motors mid-flight in emergency when doing so can reduce
the risk of damage or injury.
2. FOLLOW-ME
When the Follow Me function activated, the drone will follow the GPS in your
smart phone to follow you wherever you go.
(Make sure the smart phone connect with the aircraft successfully, turn on
APP on your smart phone.)
1. Make sure the aircraft flies 3 meters away ,30 meters height position.
2. Click
on the APP interface.
3. Waiting for APP Drone Status to display “Follow Me ready”--- the aircraft
will follow the phone’s coordinates.
4. Click the
on the APP interface again to exit the Follow Me mode.
Common lssues:
Follow Me mode would be hardly activated If phone’s GPS signal is too weak,
This could be due to the signal loss from surrounding buildings, trees, or
congestion from too many mobile phones in the area.
* Use in open area and be mindful of your surroundings. Drone is NOT equipped with
obstacle avoidance.
13
3. ACTIVE TRACK
Click
, choose
, tap on the object or person you want to track, and tap
to confirm your selection.
(NOTE: Make sure the size of the frame you mark is the same as the object
or person you tap,the frame should not be too large.）
4. HAND GESTURE
Click
on the APP, follow the TIP on the APP(PIC.1):
NOTE: Hand gesture should use the RIGHT HAND to start.
5. RETURN-TO-HOME (RTH)
The Return to Home (RTH) function bring the drones back to the Take Off Point.
This function only can be achieved under GPS mode.
There are 3 types of RTH: Smart RTH/Low-battery RTH/Fail connection RTH
①. Smart Return To Home
Press the Return to Home Button on your Transmitter
or tap on the App of your smart phone, and the
transmitter will start beeping. Your drone will return
to the TAKE OFF Point. Press the button again to stop
RTH procedure. Pull the throttle down to land the drone
in a safe area.
RTH Button
The app´s RTH Button
②. Low-Battery return to home
Low-Battery RTH is triggered when the Flight Battery level is low, When LowBattery RTH is activated, the drone will fly back to where away from you about
100 feet, and you can still control your drone. Pull the throttle down to land
the drone in a safe area. When the power of drone is completely empty, drone
will return to the TAKE OFF point where you set.
③. Fail connection RETURN-TO-HOME (RTH)
Drone will enter Return to Home Mode if the signal to the transmitter is lost.
Rebind the transmitter to the drone if dronr flies back into your view. Pull the
throttle down to land the drone at safe area.
WARNING:
This drone is NOT equipped with obstacle-avoidance.
14
6. HEADLESS MODE
1. It defaults the Normal Mode when the quadcopter and remote control are
matched sucessfully, click
, enter into Headless mode; click
again,
exit the Headless mode.
2. Normal mode: Before take-off, the white lights on the quadcopter where
they are heading is the forward direction.
3. Headless mode: Before take-off, the white lights on the quadcopter where
they are heading is the forward direction .(When the quadcopter rotates in
flight,the flight direction will not be changed).
The direction of control when the drone is paired.
Don’t turn your direction.
Don’t turn your direction.
Under Headless Mode, the forward direction is the direction the pilot faces
where the pilot pairs the drone with the transmitter. If the pilot pushes the
direction joystick forward the drone will fly forward. If the pilot pushes the
direction joystick backward, the drone will flight towards him/her. If the pilot
moves the right stick left or right, then the drone will also move left or right
relative to you. It is very important that the pilot does not change positions
or the direction he or she is facing because this will cause confusion on the
drone.
15
7. TRIM UNDER NO GPS MODE
If the drone flies under NO GPS Mode, you can trim the drone to obtain more
balanced flight. Press
for 3 seconds, and you will enter the trim mode.
Push the direction stick to the opposite side that the drone drifts to rebalance
the drone. For example, if the drone drifts to the left, push the direction stick
to the right to make the drone balanced. Press
again to exit the Trim
Mode.
DOWNLOAD THE SJ GPS PRO APP
QR code of “SJ-GPS PRO”
software for Apple IOS system
(Please scan this QR code to
install this software).
QR code of “SJ-GPS PRO”
software for Android system
(Please scan this QR code to
install this software).
- Connect the power of this model, and then access into “SETTING” in the
mobile phone, open the “WIFI” and find the “SJ-GPS PRO_XXXX”.
When the link is successfully connected, please exit the “Setting” option.
- Open “SJ-GPS PRO” software in the mobile to access into the control
interface.
1. APP INTRODUCTION
Wait until the Drone Status says “Ready to Fly” before initiating flight. This
will ensure that your GPS is synced and your drone is ready to fly.
Waiting for GPS Signal
D:00 H: 0.0 DS: 0.0 VS: 0.0
16
Controls ON/OFF
Back to Main Menu
GPS Signal
Media Gallery
Way Point Flight
VR Split Screen
Flight Record
Flight Setting
Remote Battery
Flip Screen
Drone Battery
Follow Me
Active Track
Hand Gesture
Return Home
Take Photo
Auto Take-off
Take Video
Auto Landing
Sound Recording
Drone Status
Speed (meters/sec)
Height (meters)
Distance (meters)
17
2. APP ONE KEY SHARE FUNCTION
Waiting for GPS Signal
Pic. 1
D:00 H: 0.0 DS: 0.0 VS: 0.0
Photo
Video
NO
2017-12-28
Check all
Pic. 2
Share
Save to the Delete
phone album
Photo
Video
NO
照片
视频
NO
2017-12-28
Pic. 3
2017-12-28
AirDrop. Tap to turn on WLAN and Bluetooth to
share with AirDrop.
1. Open the APP, click
, enter into the file (Pic 1.)
2. Click once or press to choose the photos which will be shared,click
choose the platforms that need to be shared(Pic 3).
Reminder: You can share 1 picture or 9 pictures at the same time.But you can only
choose one video for sharing each time.
18
3. HOW TO SEARCH THE LOST DRONE
①.Continue to click
Waiting for GPS Signal
3 times to open the MAP surface to search the drone.
D:00 H: 0.0 DS: 0.0 VS: 0.0
②.The last position of lost aircraft will be appeared on the MAP.
Current position of the mobile phone
19
4. FLIGHT
The Default GPS Mode is BEGINNER MODE, Under BEGINNER MODE:
1.Flight Distance is limited between 0-30 M.
2.Flight Altitude is limited between 0-30 M.
3.RTH Altitude is under 25 M.
You can Turn-off the BEGINNER MODE to modify the parameters in the APP on
your phone.
Flight parameter settings
BEGINNER
Flight Setting
Off after the custom mode, the default novice mode
Flight distance
Default 30m, (20-500m)
３０
Flight altitude
Default 30m, (10-120m)
３０
Cruise-in altitude
Default 25m, (10-120m)
２５
Remark: Return altitude shall not be greater than flight!
Save
On APP
CAMERA FUNCTIONS
Take Photo
Take Video
ICON ON APP
on APP, the red indicator on camera
on the Transmitter or tap
Press
will flash once, indicating the camera takes one photo.
on APP, the red indicator will keep
on the Transmitter or tap
Press
flashing, indicating the camera is taking video.
again to save the video.
Press
DO NOT take photo during taking video.
NOTE: When using the ”SJ-GPS” app, the original photos and videos will be
compressed and saved to smartphone.
TF CARD (Sold seperated)
TF
The Original images and videos are saved in the TF card. Press the TF card
slightly to take it out, then insert the card into the card reader and insert into
the USB outlet of a computer to read the data from TF card.
The images can be also viewed in the App.
20
SPECIFICATIONS
● Drone
MODEL: Z5
Weight (Including Battery): 242g/8.5 oz
Flight Time: About 15 minutes
WIFI Distance: 100-150m/300~400m (Outdoor and unobstructed, depend
on conditions and mobile device)
Motor Model: 1020
Hovering: Enabled
Operating Temperature Range: 32° to 104° F ( 0° to 40° C)
Satellite Systems GPS / GLONASS
Dimensions: Open 300mmX290mmX65mm Fold 145mmX100mmX65mm
● Camera
Controllable Range: Pitch: -90° to 0°
Lens: FOV 90°/2.0
Still Photography Modes: Single shot
Video Recording Modes: HD 1280x720P / HD 1920x1080P
(Depend on conditions and mobile device)
Photo: JPEG
Video: AVI
Supported SD Cards: TF Card 8GB (not included)
Operating Temperature: 32° to 104° F ( 0° to 40° C )
● APP / Live View
Mobile App: SJ-GPS PRO
Live View Working Frequency: 2.4 GHz ISM
Live View Quality: 720P @ 25fps / 1080P @ 25fps
(Depend on conditions and mobile device)
Latency: Low Latency Video (depend on conditions and mobile device)
Required Operating Systems: iOS 8.0 or later / Android 4.4.4 or later
Recommended Devices: 4.7˝ to 5.5˝ Smart phones
● USB Cable
Voltage: 5V 2A
Rated Power: ≤10 W
21
● Transmitter
Operating Frequency: 2.4 GHz
Capacity: 300 mAh
Operating Voltage: 3.7V
Max transmission distance: About 600m (Outdoor and unobstructed)
Max Charging Time: About 50 minutes (Depending on Charging Power)
Flight Time: About 10 Hours
Mobile Device Holder: 4.7˝ to 5.5˝ Smart Phones
Operating Temperature: 32° to 104° F ( 0° to 40° C )
● Flight Battery
Capacity: 1200 mAh
Voltage: 7.4V
Battery Type: Lipo
Energy: 8.88Wh
Net Weight: 66 g / 2.3 oz
Max Charging Power: 5-7.5W
Max Charging Time: About 110 minutes (Depending on Charging Power)
Charging Temperature Range: 14° to 104° F ( -10° to 40° C )
PARTS LIST (Included)
Blade X4
USB cable
Only for charging
Screw driver X1
ULTRAPORTABLE AND FOLDABLE
In order to make sure that it meets the requirement of the electromagnetic environment of the
aviation radio station, flying within the scope of 10 kilometers on each side by taking the airport
runway center line as the middle line is HIGHLY FORBIDDEN or flying within the scope of 20
kilometers by taking both ends of the runway as the center is HIGHLY FORBIDDEN. Flying on
the route of the airline is also PROHIBITED. Stop using all kinds of flying models or unmanned
Quad-rotors in the AREA that prohibited by related authority or department of our country.
Screw X8
Instructions X1
22
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:09:21 17:32:28+09:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2018:10:15 17:39:20+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : Z5英文说明书OK
Metadata Date                   : 2018:10:15 17:39:20+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 16
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 2911 bytes, use -b option to extract)
Instance ID                     : uuid:06b08693-5543-4fbb-964a-95c1cfb96586
Document ID                     : xmp.did:F5059E3B81BDE811AB45D175A9D97646
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:1F742DF366BDE811AB45D175A9D97646
Derived From Document ID        : xmp.did:1F742DF366BDE811AB45D175A9D97646
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:096F5581FE2EE711A910B5CC4BB5F470, xmp.iid:F5059E3B81BDE811AB45D175A9D97646
History When                    : 2017:05:02 17:26:51+08:00, 2018:09:21 17:32:18+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : C:\Users\Administrator\Desktop\1.psd
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 76.999951
Max Page Size H                 : 124.999950
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Gautami, RobotoCondensed-Regular, RobotoCondensed-Bold, FZHTJW--GB1-0, SimHei, MingHei_R, AdobeSongStd-Light
Font Family                     : Arial, Gautami, Roboto Condensed, Roboto Condensed, 方正黑体简体, 黑体, 明黑, Adobe 宋体 Std
Font Face                       : Regular, Regular, Regular, Bold, Regular, Regular, Regular, L
Font Type                       : Open Type, Open Type, TrueType, TrueType, TrueType, Open Type, TrueType, Open Type
Font Version                    : Version 5.06, Version 5.90, Version 2.000980; 2014, Version 2.000980; 2014, 1.00, Version 5.01, 1.00, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : arial.ttf, gautami.TTF, RobotoCondensed-Regular_1.ttf, RobotoCondensed-Bold_2.ttf, FZHTJW_1.TTF, simhei.ttf, 明黑_R_0.ttf, AdobeSongStd-Light_1.otf
Plate Names                     : Black
Swatch Group Name               : 默认色板组, 灰色, 明亮
Swatch Group Type               : 0, 1, 1
Swatch Colorant Swatch Name     : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999999, 50.000000, 75.000000, 84.999996, 90.000004, 75.000000, 80.000001, 69.999999, 84.999996, 100.000000, 100.000000, 75.000000, 50.000000, 35.000002, 10.000002, 0.000000, 25.000000, 39.999998, 50.000000, 55.000001, 25.000000, 30.000001, 35.000002, 39.999998, 39.999998, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 84.999996, 100.000000, 60.000002
Swatch Colorant Magenta         : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000004, 80.000001, 50.000000, 35.000002, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 10.000002, 14.999998, 50.000000, 94.999999, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 25.000000, 44.999999, 50.000000, 60.000002, 39.999998, 50.000000, 60.000002, 64.999998, 69.999999, 69.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000004, 90.000004
Swatch Colorant Yellow          : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000004, 84.999996, 94.999999, 100.000000, 84.999996, 90.000004, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 75.000000, 44.999999, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000002, 50.000000, 19.999999, 39.999998, 50.000000, 60.000002, 64.999998, 64.999998, 75.000000, 80.000001, 90.000004, 100.000000, 80.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 94.999999, 100.000000, 0.000000, 0.003099
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999998, 0.000000, 10.000002, 25.000000, 35.000002, 50.000000, 69.999999, 100.000000, 89.999402, 79.998797, 69.999701, 59.999102, 50.000000, 39.999402, 29.998803, 19.999701, 9.999102, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 25
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ALUJZ5GPS1080PA

Navigation menu