Shinano Kenshi BPDT BOOK PORT DT User Manual BookPortDT QuickStartGuide B4 ai

Shinano Kenshi Co., Ltd. BOOK PORT DT BookPortDT QuickStartGuide B4 ai

Users Manual

This document describes the main functions which are used in the "advanced mode". Change to the advanced mode as follows. Turn off the player at first. Then turn on the player with the number 5 key being pressed until the player announces "advanced mode". (To change to the simple mode, do the same until the player announces " simple mode".) 1. Connecting Book Port DT to mains outlet Insert the small round plug on the end of AC adaptor into back of the unit (1). Ensure the supplied power cable is connected to the AC adaptor firmly before plugging mains plug into a mains outlet. 2. Power On/Off, setting sleep timer Press and hold the Power On/Off button (2). Press the sleep timer key (3) until you reach the desired setting. 3. Inserting playback media Disc; Insert the cardrige into the NLS cardrige slot (4) at front of the unit until the disc will be automatically taken into the unit. SD card; Insert the SD card into the SD card slot (5) on the left side of the unit. USB memory; Insert the the NLS cardrige slot (4) at front of the unit. 4. Removing playback media SD card; Push the SD card inwards, then the card should pop out.NLS cardrige; Pull out the NLS cardrige from NLS cardrige slot (4) at front of the unit.USB memory; Same use NLS cardrige slot (4). 5. Playback and stop To start playback, press the Play/stop key (8). To stop playback, press the Play/stop key (8) again. 6. Adjusting volume, speed and tone Volume; Press the Volume up key (9) to increase, press the Volume down key (10) to decrease. Speed; Press the Speed up key (11) to increase, press the Speed down key (12) to decrease. Tone; Press the Tone up key (13) to increase, press the Tone down key (14) to decrease. 7. Rewinding / Fast forward Press and hold the Rewind key (15) to fast rewind. Press and hold the Fast Forward key (16) to fast forward. 8. Selecting media and title Press and hold the Previous title key (17) or Next title key (18) repeatedly, or press the Previous title key (17) and Nexttitle key (18) at the same time repeatedly until you reach the desired media. Then press the Previous title key (17) or Next title key (18) to select the title. 9. Moving by Level Press the Number 2 key (19) or 8 key (20) to select the navigation level, then press the Number 4 key (21) to move backward or the Number 6 key (22) to move forward within the required level. 10. Direct jump to page/heading Page; Press the GoTo key (23) once and input the page number with the number key, then press the Enter key (24) to go to page. Heading; Press the GoTo key (23) twice and input the heading number with the number key, then press the Enter key (24) to go to heading. 11. Direct jump to bookmark / Adding bookmark Press the Bookmark key (25) once and input the bookmark number with the number key, then press the Enter key (24) to go to bookmark. Press the Bookmark key (25) twice at the desired position and input the bookmark number with the number key, then press the Enter key (24) to add bookmark. 12. Selecting menu Press the Menu key (26), and press the Number 4 key (21) or 6 key (22) to select the menu, then press the Enter key (24) to confirm or the Cancel key (27) to cancel. 13. Getting book information Press the Information key (28) or press and hold the Play/stop key (8) to get the book information. 14. Backing up title Select the title you want to back up at first. Press the Number 9 key (29) to access the back up feature, and press the Number 4 key (21) or 6 key (22) to select the target media, then press the Enter key (24) to confirm. Plextalk will ask you that you wish to proceed or not. Press the Enter key (24) again to proceed or the Cancel key (27) to abort. Wired LAN (1) DC input (4) NLS cardrige slot Mic hole &Microphone jack Head phone jack (5) SD card slot (22) (29) (9) (10) (26)(11)(3)(2)(7)(17)(24)(16)(8)(28)(15) (27) (25)(20) (23)(21) (13) (12)(14)(19)(18)Quick Start explains – Book Port DT – Book Port DT Quick Start
FCCNoticetoUserThisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.NOTE:ThemanufacturerisnotresponsibleforanyradioorTVinterferencecausedbyunauthorizedmodificationstothisequipment.Suchmodificationscouldvoidtheuser’sauthoritytooperatetheequipment.NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:‐Reorientorrelocatethereceivingantenna.‐Increasetheseparationbetweentheequipmentandreceiver.‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp

Navigation menu