Shinwa BM-6018AS 2.4GHz Baby Monitor Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1545611
Application ID	q8OFOWu3B8fj6w2CdiVCMQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.18kB (589758 bits)
Date Submitted	2011-09-21 00:00:00
Date Available	2011-09-21 00:00:00
Creation Date	2011-09-02 03:52:05
Producing Software	Corel PDF Engine Version 3.0.0.667
Document Lastmod	2011-09-02 03:52:05
Document Title	Users Manual
Document Creator	CorelDRAW
Document Author:	郭吉军

135x90mm
封面
Baby Monitor Operating Instructions
婴儿监护器简易说明手册
Please read the user manual carefully
before you use for your safety and correct
operation, and please keep it
properly for reference in future.
使用前请仔细阅读本说明书
以确保安全和正确使用
并请妥善保管以供日后参考
135x90mm
内页
FCC Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician
for help.
To assure continued compliance, any changes or
modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables
when connecting to computer or peripheral devices).
Radiation Exposure Statement
This device complies with FCC radiation exposure limits
set forth for an uncontrolled environment and it also complies
with Part 15 of the FCC RF Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
The camera should be installed and operated with a
minimum distance of 20 centimeters between the radiator
and your body.
135x90mm
内页
Caution!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority
to operate the equipment.
Declaration of Conformity
Hereby,Shinwa Industries(China) Ltd. declares that this
device is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
135x90mm
内页
WARNING:
The product can not be used as a children's toy.
Keep the product out of reach from children.
The cable may cause potential safety hazard to children.
Use only approved accessories and batteries. Do not
connect incompatible products.
Your device is not water-resistant.keep it dry.
Follow any restrictions. switch the device off in aircraft,
near medical equipment, fuel, chemicals, or blasting
areas.
All wireless devices may be susceptible to interference,
which could affect performance.
Power adaptor warning: “Use only provided power
adaptor
Caution: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to
the instructions
Do not dispose of electrical products in the general
waste and ensure the used product or batteries are
disposed safely according to your local authority and
regulations.
Please do not use the product for illegal monitoring or
recording. Our company will not undertake any relative
legal liability that caused by illegal use.
135x90mm
内页
警 告:
勿将本产品作为儿童玩具玩耍。
请保持一定距离或放置儿童不易拿取到的地方。
电线可能会对儿童带来潜在的安全隐患。
本产品不防水，请保持干燥。
请遵守限制使用的规定：在医院/加油站/飞机/化学品易
燃易爆品周围请保持关机。
请使用原装适配器和电池。
废旧电池的处理及产品报废处理请遵守当地法律法规。
请勿将本品用于非法监控或录像。由非法使用引发的法
律问题，本司不负任何责任！
135x90mm
内页
Contencs
目 录
Camera
01
Receiver
02
Power on/off
03
Register/Logout
03
Recharge
04
Installed and remove the batteries
04
Place/Remove Micro SD card
04
Operate instruction
05
摄像端
监控端
如何开关机
如何注册/注销
如何充电
电池如何安装拆除
Micro Sd卡如何安装拆除
按键说明
10
11
12
12
12
12
13
13
135x90mm
内页
Operating Instructions
Baby Monitor
The care for children from family is the most
considerate for every family. Shinwa baby monitor is
designed specially for your children. It will give you
unlimited free space and let you take care of your
children’s every action. It supports the function of video
recording (AVI), which can record children’s every funny
action in their happy growth. It will help your children
grow-up under your protection in a comfortable
environment without any influence by any interference.
2.4GHz wireless digital signal transmission, with 2.4”
colorful LCD, portable and small, easy to carry;
Microphone equipped inside of camera, which help you
hear your children’s voice, it can monitor multiple
images simultaneously and play music（e.g. lullaby）
by remote control.
Camera
01
Power Switch
02
Register
03
USB port
04
Reset
01
02
03
04
01
135x90mm
内页
Operating Instructions
Baby Monitor
Receiver
01
VOX/Delete
02
Power/ESC
03
Five direction key
(up/down/left/right/OK)
04
Micro SD card slot
(on the underside of the battery)
0 5 USB port
06
Earphone jack
07
Reset
01
07
06
05
02
04
03
02
135x90mm
内页
Operating Instructions
Baby Monitor
Ⅱ. Power on/off
Camera: Press the switch to power ON/OFF. When
the power indicator LED is green, the product is ready to
be operated. If the LED doesn’t light please replace the
battery or recharge.
Receiver: Press the Power switch to Power on/off. When
the power indicator LED is blue means the receiver is
now ready to operate, if not, please replace the batteries
or recharge the receiver. The first time to power on, you
should to register the camera to the receiver successfully.
Video monitoring status:
Channel of the camera
indication of two-way communication:
Intensity of the single
Battery capacity of the camera
Battery capacity of the receiver
A+
Ch1
Ⅲ.Register/Logout
Register: Power on the transmitter and the receiver.
Press “Ok” button of the receiver, choose “setting” and
then choose “register”. Select the transmission number
and press “OK”, there will be the register information
from the transmitter camera. Press “OK” to turn to the
register position. At the same time, press the register
key on the transmitter camera and hold for seconds. The
register function is activated automatically, if the
transmitter camera has been register success, there will
be hint on the receiver interface. If failed please repeat
this process or check the capacity of the battery.
Logout: Turn on the transmitter. Press “OK” button of the
03
135x90mm
内页
Operating Instructions
Baby Monitor
receiver, choose “setting” and choose “logout” item,
select the number of the camera and press “OK” to
logout the camera.
Ⅳ.Recharge
Recharge through the USB port by two methods as follows:
1. Recharge with a power adapter plug.
2. Recharge through a USB cable connected with computer
Method 1
Method 2
Ⅴ.Installed and remove the batteries
Install: open the receiver’s battery compartment on
the rear side. Insert the battery, paying attention to
correct polarity. Close the battery compartment again.
Remove: turn off the receiver. Open the battery
compartment. Take off the battery. Close the battery
compartment again.
Ⅵ.Place/Remove Micro SD card
Place: (Receiver side can extend storage with
Micro SD card up to 4G.)
Shut down the monitor, open the battery cover and
remove the battery, then put the Micro SD card face up
into the Micro SD card slot; When the card is locked,
you can hear the click.
Remove: Shut down the monitor, open the battery
cover and remove the battery. Then gently press the
Micro SD card, and it will pop up from the slot.
04
135x90mm
内页
Operating Instructions
Baby Monitor
Ⅶ.Operate instruction
1.Camera side button instruction
Power switch: Power on/off, the indicator LED will
light.
Register: Press and hold on can register the camera
side with receiver side, when registering the indicator
LED will flicker. You can loose the button when it is
registered successfully.
Reset button: Press this button will reset system.
2.Receiver side button instruction
Reset button: Reset system in any case when press
this button.
The functions of other buttons are different when in
different status. Detailed instructions are as follows:
Under the video monitoring status:
(1)Up/Down: Used to change channels by different
sequence. When changed channel, it will display the
number of current channel (CH1, CH2, CH3, CH4 or 4
images viewing). The receiver can maximum register 4
cameras at the same time.
Channel changes as below:
4 registered cameras: Ch1
3 registered cameras: Ch1
Ch2
Ch3
images
Ch2
images
2 registered cameras: Ch1
Ch3
Ch2
images
1 registered cameras: Ch1
05
images
Ch1
Ch4
135x90mm
内页
Operating Instructions
Baby Monitor
(2)Left/Right: To adjust the volume, and status
displayed with icons.
(3)OK: Only by pressing this button can open the menu,
and the video keep in active status when the menu is
opened. The menu will be closed when there is no operation
within 5 seconds or by pressing Power/ESC button.
(4)Power/ESC: Shut down the menu when press this
button.
(5)Speak/Delete: To open or close the
voice transmission from the monitor to the camera.
Under the menu status:
(1) Up/Down: To change channels.
(2) Left/Right: To move to the left and right or change
the settings.
(3)OK: To select, confirm and enter.
(4)Power/ESC: Press this button to cancel or return,
press and hold on for a few seconds to power on or off.
(5)Speak/Delete: When operating the video files, it can
be used to delete files; Otherwise used to open or close
the voice transmission.
The menu is active during the period of validity,
and you can operate as follows:
Zoom in/out function: Press the OK button can enter
it. And then use the left/right button to select one from 5
different areas of the screen, then press the OK button
to execute.
Images move function: Press the OK button to enter
it. And then use the left/right/up/down button to move
the image to corresponding direction. It can be used
06
135x90mm
内页
Operating Instructions
Baby Monitor
only when the image is under zoom in status.
Record function: Press OK button to start or stop
recording, also can press Power/ESC button to stop
recording and exit the menu at the same time.
Playback function: Press the OK button can enter the
submenu and display the files list, and the list is arrayed
by the found date. Use the Up/Down button to select file,
use the Speak/Delete button to delete file; Press the
OK button can play or suspend, press Power/ESC
button can return to the video monitoring interface.
Lullaby, press OK button to enter the lullaby interface,
Select the lullaby tracks, then press OK button to play
the lullaby selected and exit to the main menu
meanwhile. There is a playing indication on the lullaby
menu. Stop playing by pressing OK button under playing
condition.
System setting function: Press OK button to enter,
use Up/Down button to select and then use OK button to
confirm. Press Power/ESC button can cancel or return.
System Settings:
Register: Camera register/unregister
Video store location: Micro SD card or local disk
PC link: Connect to the PC through a USB cable, it can
be used like a USB disk, then your can operate the
video files you recorded.
Power saving: Set the auto power saving time.
Language setting: Set the language.
Backlight: Set the brightness of the LCD display.
Voice trigger control : on/off
07
135x90mm
内页
Operating Instructions
Baby Monitor
Movement trigger control: on/off
Camera setting: Set the parameter for the camera of
each channel. Such as the brightness, contrast,
saturation, frame rate and night-vision control.
Capacity: View the capacity of internal storage and
external Micro SD card.
Version: View the version of the software.
Default: Restore the default settings.
Standby and hibernation mode:
Enter the hibernation mode: When the hibernation
time you set in the Power saving mode of system setting,
it will enter the hibernation mode automatically and
shut down the audio, video and LCD.
Exit the hibernation mode: When press anyone
button of the monitor or the camera side is warning, it will
exit the hibernation mode automatically. Then warning
can be triggered by voice trigger function or movement
sensitive function.
Voice trigger function
Under working situation of voice trigger function, the
receiver will shock when the voice reach a certain range
that detected by the camera.
Movement trigger function
Under working situation of movement sensitivity
function, the receiver will shock when the movement
reach a certain range that detected by the camera.
08
135x90mm
内页
Operating Instructions
Baby Monitor
Night vision function
In dark surroundings, pictures can be viewed clearly by
turning on night vision function automatically or manually.
Setting of night vision: under setting menu, select the
camera channel needed, select auto, on or off when you
see the night vision control bar.
“auto” means the camera perceive the light degree
through sensor type and the night vision automatically on or
off when the surrounding is dark or bright.
“on” means on the night vision directly;
“off” means off the night vision directly;
09
135x90mm
内页
婴儿监 护 器 简 易 说 明 手 册
Baby Monitor
每个家庭都希望给予孩子最为周 到的照顾，本品是一款
专门为您的家庭设计的既优秀又可爱的幼儿监护产品。她简
化了复杂的操作，给您无限的自由空间，使您在享受舒适生
活的同时对孩子的每一个行为都了如指掌。这款产品支持录
像功能，可以记录孩子们愉快的成长过程。孩子们在舒适的
环境中不会受到任何干扰，在您的保护下茁壮成长。
本品采用2.4GHz无线数字信号发射；2.4英寸彩色LCD显示
屏；体积小便于携带，摄像端内设麦克风，随时随地帮助您
聆听孩子的声音；摄像端和监控端可以独立使用；监控端可
同时监控4个摄像端；可将声音及视频录制成AVI格式输出；
具有双向通话功能，并可远程控制播放音乐。
摄像端(C AME R A)
01
电源键
02
对码键
03
USB接口
04
复位键
01
02
03
04
10
135x90mm
内页
婴儿监 护 器 简 易 说 明 手 册
Baby Monitor
监控端(R E C E I VE R )
01
01
通话键/删除键
02
POWER/ESC键
03
五向功能键(上/下/左/右/OK键)
04
Micro S D卡插口(位于电池底部)
05
USB接口
06
耳机接口
07
复位键
07
06
05
02
04
03
11
135x90mm
内页
婴儿监护器简易说明手册
Baby Monitor
二、如何开关机：
摄 像端：按电源键开、关机；开机成功红色指示灯亮、
若 无反应请充电或更换电池。
监 控端：长按电源键开、关机；开机后显示视频主界面，
进 入视频监控状态；初次开机需要待摄像注册成功才可
显 示监控画面。开机成功蓝色指示灯亮、若无反应请充
电 或更换电池。
摄像端 通 道指示
视 频监控状态：
信号强度指示
A+
Ch1
监 控端电量 指 示
双向通话指示
摄 像端电量 指 示
注 ： 当 系 统 出 现 按 键 功 能 失 效或死 机 时，可按 复 位键进 行 复 位。
三、如何注册/注销：
注册：在摄像端、监控端开机状态下，监控端按“OK”键
打开菜单、进入“系统设置”项，选择“注册”子菜单项，
选择需注册的摄像端号，按“OK”键弹出注册摄像端信息，
再按“OK”键确定进入注册状态；此时按住摄像端的对码
键 ， 进 行对码，注册成功监控 端 有 提 示 成 功 ， 若 失 败 可
以 重 复 此 过 程再试或确认电量情况再试。
注销：在监控端开机状态下，打 开 菜 单 、 进 入 “ 系 统 设
置”项，选择“注册”子菜单项，选择需注销的摄像端号，
按“OK”键弹出注销摄像端信息， 再 按 “O K” 键 确 定 执
行注销。
四、如何充电：
摄像端与监控端充电时从USB接口接入
方 式一：通过电源适配器充电
方 式二：通过USB线连接电脑充电
方式 二
方 式一
五、电池如何安装拆除：
安 装：打开电池盖，按正负指示放置电池，扣好盖。
拆 除：关机，打开电池盖取出电池，扣好盖。
12
135x90mm
内页
婴 儿 监护器 简 易 说 明 手 册
Baby Monitor
六、Mi c ro SD卡如何安装拆除：
安装：监控端扩充存储可外接Micro SD卡，目前支持最
大4 G。打开电池盖、取出电池、将Micro S D卡正面插 入
M i c r o S D卡 槽 、 听 到咔嚓锁住声音即可。
拆除：打开电池盖、取出电池、轻压Micro SD会从卡槽
中弹出、即可将Micro S D卡从Micro S D卡槽取出。
七、按键说明
（一）、摄像端按键说明：
电源键：开、关机，开机成功有电源指示灯亮。
对码键：按住此键启动对码、对码过程中绿 色 指 示 灯 闪
烁、对码成功即可松开。
复位键：系统复位。
（二）、监控端按键操作说明：
复位键：系统复位，任何状态下都可对系统进行复位处
理。其余键的功能依据所处状态情况，功能定义有区别，
具体说明如下：
在视频监控状态下
1、上、下键：用 于 切 换 通 道 ， 向 上 或 向 下 顺序切 换 通道。
切换 通道之后，显示当前通道号（Ch 1或C h 2或C h 3或C h 4
或 四 画面显示）本品监控端最大支持同时注册4个摄像端。
上键切换通道举例：
如果有四个摄像端：Ch1
C h2
C h3
C h4
四画面
如果只注册三个摄像端：Ch1
如果只有一个摄像端：Ch1
C h2
四画面
四 画面
C h3
C h1
2、左、右键：用于调节音量，有音量增、减图标显示。
3、OK键：按此键弹出菜单，其它任 何 情 况 下 都 不 出 菜 单 。
菜单出现的时候，图像保持活动状态。5秒没有操作菜单
会自动消隐或短按POWER/ESC键关闭菜单。菜单有效期间
本机处于菜单状态。
4、POWER/ESC键：短按此键关闭菜单,长按开、关机
5、通话键/删除键：用于启动、关闭监控端往摄像端通话
13
135x90mm
内页
婴儿监护器简易说明手册
Baby Monitor
在菜单状态下
1、 上、下键：用于移动选择菜单项。
2、 左、右键：用于向左、向右移动或改变设置值。
3、O K键：用于选择确认执行。
4、P OWER/ESC键：短按此键用于取消或返回功能。
5、 通话键/删除键，在操作视频文件时可做删除功能，其
它 用于启动关闭通话。
菜单有效期间本机处于菜单状态，界面的菜单功能操作说明：
： 放大功能，按OK键进入后使用左、右键顺序选
择 监控画面区域（五个区域），OK键执行放大。
： 平移功能，按OK键进入后上、下、左、右键移动图像。
(监 控画面放大后,此菜单才有效)
： 录像功能，按OK键启动录像、暂停录像；也可按
POWER/ESC键停止同时消隐菜单。
： 回放功能，按OK键进入播放子界面，显示文件列表。
上 、下键选择文件，文件按新 到 旧 排 列。 按通话键/删除
键 可 删除选中的文件。OK键为播放或者暂停，POWER/ESC
键 退出，回到视频监控界面。
： 睡眠曲，按OK键进入，选择睡眠曲目再按OK键启动睡
眠曲播放同时退回到主菜单，并且睡眠曲菜单上有播放标识。
当在播放状态下按OK键可控制播放停止。
： 系统设置，按OK键进入，上、下键选择，OK键确认
执 行；POWER/ESC键取消或退回。
系 统设置项有：
注 册：摄像端注册/注销
存 储位置设置：本机或者Micro S D卡。
连 接电脑：先用USB线连接好电脑，再执行此功能。相
当 于U盘，可操作录制的视频文件
节 电模式：
语 言设置
背 光（LCD亮度调节）
声 控控制：开/关
动 作识别控制：开/关
14
135x90mm
内页
婴儿监 护 器 简 易 说 明 手 册
Baby Monitor
摄像头设置：设置各通道的摄像头参数（亮度/对比度/
饱和度/帧率/红外夜视控制）
容量显示：包括本机容量与扩展Micro SD卡容量信息
版本信息：包括监控端、摄像端与厂家信息
恢复出厂设置
待机/休眠状态
休 眠进入：系统设置中的节电时间到达休眠时间后 ， 进
入 休眠状态，会关闭音视频，关闭LCD。
休 眠退出：发射端报警或按监控端的任意键；报警是由
于 声控或动作识别的功能引发。
声控功能
在 监控端声控打开的情况下，当摄像端 检 测 到 声 音 达 到
一 定 幅 度 时 ，监控端会有震动提示。
动作识别功能
在 监控端动作识别打开的情况下，当摄像端检测到有动
作 时，动作达 到一定程度，监控端会有震动提示。
夜视功能
当 环境光较暗时，可自动或人为手动开启红外夜视，让
视 频清晰可见。
夜 视功能设置：在设置菜单下，进入到摄像头控制子菜
单 项，选择需控制的摄像头通道，可看到红外开关控制
栏 ，可设置成自动、开或关。
“ 自动”就是摄像端通过感光器件感知环境光亮程度，
光 线较暗时自动开启或光线亮时关闭红外夜视；
“ 开”就是直接控制红外夜视开启；
“ 关”就是直接控制红外夜视关闭。
15
135x90mm
封底
a b normal c ondition
can not power on
video interface
not available after
power on
R e ceiving d istan c e
shortened
squealing during
working
solution
1 , p l ease r echarge, s wi t c h o n a f t e r
c h a r ged.
2 , c h eck t he r eset b u t t o n
1,make sure the camera has enough
power and correctly registered
2,switch to the registered camera
channel or register the camera with the
existing channel
1,supply power by adapter or recharge
2,reselect position of the receiver and
camera.
3,keep away from other electrical
equipments.
Enlarge the distance between the
camera and receiver
can not hear the voice 1,turn up the volume of receiver
2,exit playing “lullaby”
from the camera
Micro SD card
nonrecognition
Use branded Micro SD card that less than 4G
system halted
Please press the reset button
异 常 情况
解决 办 法
1、请充电，电量足再开机
2、检查复位键
1、 确保摄 像 头有电 ， 并正确 注 册
2、 切换到 已 注册摄 像 头的通 道 ，或者 在
此 通道上 注 册摄像 头
无 法 开机
开机看 不 到视频界 面
接 收 距离变 短
1、 使用适 配 器供电 或 充电
2、 重新选 择 监控端 和 摄像端 位 置
3、 尽量远 离 其它电 器
工 作 中出现 啸 叫
加 大监控 端 、摄像 端 之间的 距 离
听 不到摄 像 头端的声 音
Micro S D卡 不识别
意 外 死机
1、 主机声 音 调大
2、 退出“ 催 眠曲” 播 放
建 议使用4 G以 内的正 规 品牌Micro S D卡
请 按复位 键 复位

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 22
Create Date                     : D:20110902035205
Modify Date                     : D:20110902035205
Producer                        : Corel PDF Engine Version 3.0.0.667
Author                          : 郭吉军
Creator                         : CorelDRAW
Title                           : 使用说明手册135x90mm

EXIF Metadata provided by EXIF.tools