Shure orporated PA821A Antenna Combiner User Manual Exhibit D Users Manual per 2 1033 c3
Shure Incorporated Antenna Combiner Exhibit D Users Manual per 2 1033 c3
Exhibit D Users Manual per 2 1033 c3
PA821A User Guide Model PA821A Antenna Combiner Guide de l’utilisateur du répartiteur d’antenne PSM® Bedienungsanleitung für die Antennenweiche PSM® Guía del usuario del combinador de antenas PSM® Guida d’uso del combinatore di antenne PSM® PSM® アンテナコンバイナ ユーザーガイド PSM® 天线合并器用户指南 PSM® 天線合併器用戶指南 PSM® Antenna Combiner 사용자 설명서 27A15837(Rev. 1) ©2011 Shure Incorporated N108 Printed in U.S.A. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. ! IMPORTANT SAFETY INSTRUCTIONS ! 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat. DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. by the manufacturer. ONLY USE attachments/accessories USE only with a cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. 13. 14. 15. 16. 17. 18. 19. 20. UNPLUG this apparatus during lightning storms or when unused for long periods of time. REFER all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects lled with liquids, such as vases, on the apparatus. The MAINS plug or an appliance coupler shall remain readily operable. The airborne noise of the apparatus does not exceed 70dB (A). Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to quali ed service personnel. The safety certi cations do not apply when the operating voltage is changed from the factory setting. WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. DESCRIPTION The Shure PA821A Antenna Combiners actively combine antenna outputs from up to eight PSM wireless transmitters to a single antenna, improving RF performance and reducing rack clutter. INSTALLATION Set the power switch on the front panel to OFF before installing. Connect the unit to an AC power source using the supplied power cable. Switch the power ON to use the device. The power light will illuminate. Power the unit OFF when not in use or before disconnecting the unit from the AC power source. PSM Transmitters 8-TO-1 COMBINING: 1. 2. 3. Using the supplied BNC-BNC cables, connect the Antenna Output of each transmitter to the ANTENNA INPUTS of the PA821A (Figure 2). Attach an antenna to the MAIN Out of PA821A. For wideband applications, use PA805SWB directional antenna (Figure 1). Connect the PA821A to a power outlet using one of the supplied power cables. The PA821A contains a universal power supply to operate anywhere in the world. AC POWER NOTE: When the PA821A is powered on, the input signal indicators (1-8) on the front panel will illuminate if an active transmitter is connected to the corresponding input (1-8) on the back panel (Figure 1). FIGURE 2 FIGURE 1 FOR MORE THAN 8 TRANSMITTERS 1. 2. 3. 4. SPECIFICATIONS RF Carrier Frequency Range Using the supplied BNC-BNC cables, connect the Antenna Output of each transmitter to the Antenna Inputs of the PA821A. 470-952 MHz System Gain Use the 1 ft. jumper BNC-BNC cable to connect the MAIN Output of the PA821A to the A IN of the Expansion Port. +0/-5 dB Input AC Line Voltage 100-240 Vac, 50/60 Hz Maximum Input Line Power Connect another Antenna Output (from a ninth PSM transmitter, second PA821A or other antenna port) to the B IN of the Expansion Port. 70W Maximum Current Drain 150VA max 0.42-1.5 Amperes (Amperes = 150 VA/Input AC Line Voltage) Maximum RF Input Power Attach an antenna to the A + B OUT of the Expansion Port. For wideband applications, use the PA805-SWB directional antenna, Figure 3. 24 dBm (250 mW) per channel Input Signal Indicator Threshold +4 dBm (2.5 mW), +2 dBm (1.6 mW) typical Impedance 50 Ω nominal Operating Temperature Range 0° F (-18° C) to +145° F (+63° C) NOTE: Electrical safety approval is based on a maximum ambient temperature of 30°C. Overall Dimensions 43.4 mm high x 398.8 mm wide x331.5 mm deep (1 11/16 in. H x 15 11/16 in. W x 13 1/2 in. D) Net Weight 4.53 Kg (10 lbs unpackaged, without power and RF cables) Input/Output Connector Type BNC-type 8 input, 1 output ACTIVE 2 inputs, 1 output EXPANSION PORT FURNISHED ACCESSORIES (8) 2 ft. Coaxial Cable (RG58C/U) 50Ω BNC 1 ft. jumper PSM Transmitters UA802 95J2035 120 VAC Power Line Cord 95A8389 240 VAC Power Line Cord (U.K.) 95A8713 230 VAC Power Line Cord 95A8247 OPTIONAL ACCESSORIES Wideband Unidirectional Antenna (470-952 MHz) 10 ft. Coaxial Cable (RG-8X/U) 25 ft. Coaxial Cable (RG-8X/U) 50 ft. Coaxial Cable (RG-8X/U) CERTIFICATIONS PA821A: Certified to FCC Part 74 (FCC ID No. DD4PA821A). Certified in Canada by IC to RSS-123 AND RSS-102 (Certification No. IC: 616A-PA821A). UL LISTED to UL6500 (2nd Edition) and cUL LISTED to CAN/CSA E60065-00. Meets the Essential Requirements of the European R&TTE Directive 99/5/EC, eligible to bear CE mark. Meets EMC requirements of EN 301 489 Parts 1 and 9 and is GS-Certified to EN 60065 (6th Edition). Conforms to Australian EMC requirements, eligible to bear C-Tick mark (N108). AC Power LICENSING Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. FIGURE 3 THIS RADIO EQUIPMENT IS INTENDED FOR USE IN PROFESSIONAL ENTERTAINMENT AND SIMILAR APPLICATIONS. NOTE THIS EQUIPMENT MAY BE CAPABLE OF OPERATING ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGION. Licensing: Note that a ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. PA805SWB PA725 UA825 UA850 United States, Canada, Latin America, Caribbean: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: 847-600-2000 Fax: 847-600-1212 (USA) Fax: 847-600-6446 Email: info@shure.com www.shure.com ©2010 Shure Incorporated Europe, Middle East, Africa: Shure Europe GmbH Wannenäckestr. 28, 74078 Heilbronn, Germany Phone: 49-7131-72140 Fax: 49-7131-721414 Email: info@shure.de Asia, Pacific: Shure Asia Limited 22/F, 625 King’s Road North Point, Island East Hong Kong Phone: 852-2893-4290 Fax: 852-2893-4055 Email: info@shure.com.hk
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Create Date : 2011:06:28 10:57:39-05:00 Creator : Adobe InDesign CS4 (6.0) Modify Date : 2011:07:06 15:20:10-05:00 XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.351735, 2008/07/22-18:11:12 Metadata Date : 2011:07:06 15:20:10-05:00 Creator Tool : Adobe InDesign CS4 (6.0) Thumbnail Width : 188 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 19057 bytes, use -b option to extract) Format : application/pdf Document ID : uuid:0bc1e418-f2d1-4e44-87bd-920fdf7b5df7 Instance ID : uuid:c80a5d5c-d044-4f48-9842-fc41c95657d0 Rendition Class : proof:pdf Producer : Adobe PDF Library 9.0 N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 8.500000 Max Page Size H : 11.000000 Max Page Size Unit : Inches Font Name : SymbolMT, NimbusSansGlobal-Bold, NimbusSansGlobal-Regular Font Family : Symbol, NimbusSansGlobal Bold, NimbusSansGlobal Font Face : Regular, Regular, Regular Font Type : Open Type, TrueType, TrueType Font Version : Version 1.60, Version 3.00, Version 3.00 Font Composite : False, False, False Font File Name : SYMBOL.TTF, n019004g.ttf, n019003g.ttf Plate Names : Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Page Count : 4 For : Van Dorn, Stuart, Title : PA821A_combiner.pdf Bounding Box : 0 0 612 792 Container Version : 11 Creator Version : 14 Image Height : 792 Image Width : 612 Image Size : 612x792 Megapixels : 0.485EXIF Metadata provided by EXIF.tools