Shure orporated QLXD2V50 Wireless Microphone Transmitter User Manual Exhibit D Users Manual per 2 1033 c3
Shure Incorporated Wireless Microphone Transmitter Exhibit D Users Manual per 2 1033 c3
Exhibit D Users Manual per 2 1033 c3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2980391 |
| Application ID | TuzwskVosOhqfUjzvPfHzw== |
| Document Description | Exhibit D Users Manual per 2 1033 c3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 174.19kB (2177382 bits) |
| Date Submitted | 2016-05-05 00:00:00 |
| Date Available | 2016-05-05 00:00:00 |
| Creation Date | 2016-05-03 12:33:25 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-05-04 14:34:28 |
| Document Title | Exhibit D Users Manual per 2 1033 c3 |
| Document Creator | Adobe InDesign CC 2015 (Windows) |
WIRELESS SYSTEM QLX-D USER GUIDE ® Le Guide de l’Utilisateur Bedienungsanleitung Manuale d’uso Guia del Usuario Manual do Usuário Руководство пользователя Gebruikershandleiding © 2015 Shure Incorporated 27A29879 (Rev. 1) IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions. 8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product. 9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer. 12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance coupler shall remain readily operable. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. 21. Operate this product within its specified operating temperature range. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting. Important Product Information LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. Information to the user This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. WARNING: Danger of explosion if battery incorrectly replaced. Operate only with Shure compatible batteries. Note: Use only with the included power supply or a Shure-approved equivalent. WARNING • Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate. • Follow instructions from manufacturer • Only use Shure charger to recharge Shure rechargeable batteries • WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type. • Never put batteries in mouth. If swallowed, contact your physician or local poison control center • Do not short circuit; may cause burns or catch fire • Do not charge or use battery packs other than Shure rechargeable batteries • Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs. • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like Australia Warning for Wireless This device operates under an ACMA class licence and must comply with all the conditions of that licence including operating frequencies. Before 31 December 2014, this device will comply if it is operated in the 520-820 MHz frequency band. WARNING: After 31 December 2014, in order to comply, this device must not be operated in the 694-820 MHz band. Caution: Avoid operating mobile phones and mobile broadband devices near your wireless system to prevent the possibility of interference. WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. System Overview QLX-D® Digital Wireless delivers defined, streamlined performance with transparent 24-bit digital audio. Combining professional features with simplified setup and operation, QLX-D offers outstanding wireless functionality for demanding live sound events and installations. System Components Shure digital wireless technology enables QLX-D to transmit clearly detailed audio with extended, virtually flat frequency response. Designed to be highly RF spectrum efficient, QLX-D can operate more than 60 compatible channels simultaneously in a single frequency band. Automatic channel scan and IR sync make finding and assigning an open frequency quick and easy. Ethernet connection provides networked channel scanning across multiple receivers and Shure Wireless Workbench® control software compatibility for advanced frequency coordination. AES-256 encryption comes standard and can be easily enabled for secure wireless transmission. Transparent 24-bit digital audio Extended 20 Hz to 20 kHz frequency range (microphone dependent) 120 dB dynamic range Digital predictive switching diversity 64 MHz tuning bandwidth (region dependent) More than 60 available channels per frequency band (region dependent) Up to 17 compatible systems per 6MHz TV band; 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Ethernet networking for multiple receiver systems Network channel scanning configures open frequencies for networked receivers Compatible with Shure Wireless Workbench® 6 control software Remote control from a mobile device or tablet via ShurePlus™ Channels app AES-256 encryption for secure wireless transmission Elegant and easy-to-use interface with high-contrast LCD menu Compatible with external control systems such as AMX or Crestron Professional-grade all-metal construction Transmitters use 2 AA batteries or Shure SB900 rechargeable battery This guide is a quick reference covering the essential features and functions of the QLX-D system. A comprehensive version of the guide covering the following topics is available online by visiting www.shure.com • • • • • • • • • • • • Encryption Network Scan Networking Firmware Updates Wireless Workbench 6 Setting IP Addresses and Subnet Masks Connecting to External Controls Systems (AMX/Crestron) Transmitter RF Power Selecting Regional TV Bandwidth Combo Systems Custom Groups Optional Accessories sync ௗ Features Full Manual Online enter QLX-D also adds Shure rechargeable power options to provide dramatic long-term cost savings and extended transmitter battery life over alkaline batteries, and battery metering that reports remaining runtime in hours and minutes. With clearly defined performance and innovation, QLX-D delivers the very latest in digital wireless technology from Shure. • • • • • • • • • • • • • • • • • • menu on ① QLXD4 Receiver ② PS23 Power Supply ③ 1/2 Wave Antennas (2) ④ 2 ft. BNC Cables with Bulkhead Adapters (2) ⑤ Choice of QLXD1 Bodypack Transmitter or QLXD2 Handheld Transmitter ⑥ AA Alkaline Batteries (not included in Argentina) ⑦ Rackmount Hardware Model Variations Model variations with additional components are available to meet specific performance situations. QLXD2 Handheld Transmitter Includes QLXD2 Handheld, available with any of the following microphone cartridges: • • • • • • • • SM58 Beta 58A SM86 Beta 87A SM87A Beta 87C KSM9 KSM9HS (black) Microphone Clip Battery Contact Cover Zipper Bag QLXD1 Bodypack Guitar System Includes QLXD1 bodypack transmitter WA305 Premium instrument cable Zipper Bag QLXD1 Bodypack Headworn or Lavalier Includes QLXD1 bodypack, available with any of the following microphone cartridges: • • • • • • • • • Beta 98H/C WL93 WL183 WL184 WL185 MX150 (omni) MX150 (cardioid) MX153 (black or tan) SM35 Zipper Bag Bodypack and Handheld Combo System • • • • QLXD1 bodypack transmitter with WL185 Microflex cardioid lavalier microphone QLXD2 handheld transmitter with Shure SM58 microphone cartridge Battery Contact Cover Zipper Bag (2) Quick Start Step 1: Power and Antenna Connection Step 4: IR Sync to Create an Audio Channel ① Connect an antenna to each of the antenna connectors. ② Connect the power supply to the receiver and plug into an AC power source. ③ Connect the receiver audio output to a mixer or amplifier. ④ Press and hold the power button to turn on the receiver. 1. Turn on the transmitter. 2. Press the sync button on the receiver. The red ir LED will blink indicating that sync mode is active. 3. Align the IR sync windows of the transmitter and receiver at a distance of <15 cm (6 in.). When the transmitter and receiver are aligned, the red ir LED remains on and the sync will automatically occur. PS23 < 15 cm (6 in.) INSTRUMENT OUT INSTRUMENT OUT 4. Note: If the IR sync fails, repeat the IR sync procedure, carefully maintaining alignment between the IR windows of the transmitter and receiver. Step 2: Scanning for the Best Available Channel Press the menu button on the receiver to access the scan function. l ll l l l l l l l l l l rf audio gain rf enter ir sync rf enter ir sync Step 5: Sound Check and Gain Adjustment 1. Test the transmitter at performance levels while monitoring the audio meter and the audio LED. The audio meter should display at least 3 bars and the audio LED should be green. Reduce the gain if there is audible distortion of the audio. 2. Increase or decrease the gain if necessary by pressing the arrow buttons on the receiver front panel. TV Step 3: Install Batteries into Transmitter lll IIIII I I I I I I I I II III II II audio dB group channel lll l l l l l l l l l l l l l l l ll menu MHz llllll sync Press the enter button to start a frequency scan. The scan icon will flash while in scan mode. When the scan is complete, the selected group and channel appear on the display. TV audio lll lll lll ir enter group channel 2. rf menu lll l ll lll menu audio l l l l scan IIIIII II I I I I I I III III II II lll lll 1. sync good appears on the display when IR sync is complete. The blue rf LED will illuminate indicating that the transmitter is within range of the receiver. MHz hr mn dB group channel rf audio gain ULXD2 on AA Batteries Shure SB900 on on AA Adapter AA Adapter ① Accessing the Battery Compartment Press the side tabs on the bodypack or unscrew the cover on the handheld as shown to access the battery compartment. ② Installing Batteries -- AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown -- Shure SB900 Battery: Place battery as shown (note polarity markings), remove AA Adaptor from bodypack transmitter, stow AA Adaptor in door for handheld transmitter Note: If using AA batteries, select a battery type from the transmitter menu to ensure accurate battery metering. Hardware Interface Receiver Front and Back Panels Receiver Display 6 7 8 9 10 13 12 11 10 network TV 14 hr 15 Shows menu options, receiver and transmitter settings. ② Arrow Buttons Adjust gain setting or change menu parameters. ③ Enter Button ⑧ RF LED Press to activate IR sync. ⑨ IR Window ④ Sync Button ⑤ Power Switch Illuminates when RF link with transmitter is active. Align with the transmitter IR window during an IR sync to automatically program transmitters. Powers receiver on or off. ⑥ Audio LED -- Green = normal -- Yellow = signal approaching limiter threshold -- Red = limiter engaged to prevent clipping MHz OL TxOL menu power gain dB rf audio gain ⑦ Menu Button -- Press to access or select menu screens -- Press to cancel pending changes -- Press and hold to return to the home screen Press to save menu or parameter changes. scan mn group channel ① Display ⑩ Sync LED -- Blinking: IR sync mode is enabled -- On: Receiver and transmitter aligned for IR sync ① Group ⑦ Receiver Lock Status Displays group setting. Lock icon and name of locked control: -- menu -- power -- gain ② Channel Displays channel setting. ③ Active Antenna Indicator Illuminates to indicate which antenna is active. ④ RF Signal Meter Number of bars displayed corresponds to RF signal level - OL = overload. ⑤ Audio Meter Number of bars displayed corresponds to audio level. -- OL = Illuminates when receiver audio limiter is active to prevent clipping -- TxOL = Illuminates when transmitter input is overloaded. Reduce input from microphone or instrument to prevent clipping. ⑥ Gain Level Displays receiver gain setting in 1 dB increments. ⑧ Frequency Setting Selected frequency (MHz). ⑨ Encryption Status Illuminates when encryption is enabled. ⑩ Scan Displayed when scan function is active. ⑪ Network Scan Displayed when network scan function is active in multi-receiver systems. ⑫ Network Connection Indicator Illuminates when additional Shure components are detected on the network. ⑬ TV Channel Displays the number of the TV channel containing the selected frequency. ⑭ Transmitter Battery Icon Indicates remaining battery life. ⑮ SB900 Battery Runtime When the transmitter is powered by a Shure SB900 rechargeable battery, remaining runtime is displayed in hours:minutes. 15 ⑪ Power Cord Strain Relief ⑭ Receiver Reset ⑫ Power Supply Jack ⑮ Antenna Connectors ⑬ Ethernet Port ⑯ Mic/Line Switch Connection point for DC power supply. For network connection. -- Amber LED (network speed): ⑰ XLR Audio Output scan I I I gro u p MHz I I I channel I I I I I I I I I I I I I Impedance Balanced (Tip: audio, Ring: no audio, Sleeve: ground) gai n au dio rf I I I I I I c h a n n el grou p channel network scan I I I ⑱ 1/4" Instrument/Auxiliary Output MH z Balanced (1: ground, 2: audio +, 3: audio - ) TV channel I I I I I I flashing = rate corresponds to traffic volume Sets output level to microphone or line. Press the menu button to access the menu. Each additional press of the menu button advances to the next menu screen in the following order: I I I -- Green LED (network status): off = no network link, on = network link active BNC connector for receiver antennas Main Menu off = 10 Mbps, on = 100 Mbps Press to restore receiver default settings. The receiver has a main menu for setup and configuration and an advanced menu to access additional receiver functions. I I I I I Secures power cord. Navigating the Receiver Menus I I I I 18 I I I I 17 I I I I 16 I I I I 15 I I I I I 14 I I I 13 I I I 12 I I I 11 ① Scan Receiver automatically scans for the best available frequency ② Network Scan Scans to find frequencies for networked receivers operating in the same frequency band ③ Group Edit the receiver group settings ④ Channel Edit the receiver channel settings ⑤ Lock Choose a control lock option ⑥ Encryption Use the arrow buttons to enable encryption (on) or disable encryption (off) ⑦ Frequency Use the arrow buttons to edit the frequency value Advanced Menu 10 Starting from the main menu home screen, press menu while holding the enter button to access the advanced menu. Each additional press of the menu button advances to the next menu screen in the following order. TV 11 MHz enter g a in I I I I menu gro up I I I audio MHz c h a n ne l rf TV I I I gro up channel MHz I I I QLXD1 net wor k on ① Custom Groups Use to add channels and frequencies to Custom Groups ② TV Channel Spacing Selects the regional bandwidth for TV channel display ③ Firmware Update Use to update the transmitter firmware QLXD2 ④ IP Settings Use to select and edit IP settings and subnet masks ⑤ Network Reset Returns network settings and IP address to default setting ⑥ Factory Reset 12 Restores factory settings For application and configuration details, see the related guide topic for each advanced feature. Tips for Editing Menu Parameters • • • • • To increase, decrease or change a parameter, use the arrow buttons A menu setting will blink when editing is enabled To save a menu change, press enter To exit a menu without saving a change, press menu To access the advanced menu, press menu while holding the enter button from the home screen • To return to the home screen from any menu without saving changes, press and hold the menu button. Transmitters ① Power LED -- Green = unit is powered on -- Red = low battery Transmitter Display ① Battery Indicator Bars displayed indicate remaining battery life. ② Home Screen Display: Group and Channel/Frequency/SB900 Battery Runtime Use the arrow keys to select one of the following home screen displays: Group and Channel ② On/Off Switch Powers the transmitter on or off. ③ Encryption Status ④ IR window ④ Lock ⑤ Menu Navigation Buttons ⑤ RF Power Align with the receiver IR window during an IR sync for automated transmitter programming. menu = Use to navigate between menu screens. ▼▲ = Use to select menu screens, edit menu parameters, or choose a home screen display option. Frequency MHz group channel ③ Display: View menu screens and settings. Press any control button to activate the backlight. SB900 battery runtime Icon displayed when encryption is enabled. Displayed when transmitter controls are locked. RF power setting (Lo or Hi). ⑥ Mic Offset Displays mic offset level in 3 dB increments. enter = Press to confirm and save parameter changes. Tip: Press the menu button to exit without saving parameter changes. ⑥ Battery Compartment Requires 2 AA batteries or a Shure SB900 rechargeable battery. Secures batteries when powering transmitter with AA batteries instead of Shure SB900 battery. ⑦ AA Battery Adapter rf power mic offset dB group channel MHz ⑧ Bodypack Antenna For RF signal transmission. ⑨ Handheld Integrated Antenna For RF signal transmission. ⑩ Microphone Cartridge See Optional Accessories for a list of compatible cartridges. ⑪ TA4M Input Jack Connects to a 4-Pin Mini Connector (TA4F) microphone or instrument cable. ⑫ Battery Contact Cover Align the cover as shown to prevent reflections from the battery contacts during broadcasts or performances. Transmitter controls • To increase, decrease or change a parameter, use the ▼▲ buttons • To save a menu change, press enter • To exit a menu without saving a change, press the menu button menu enter enter menu Bodypack Handheld Transmitter Menu Options and Navigation Battery Installation The transmitter features individual menu screens for setting up and adjusting the transmitter. To access the menu options from the home screen, press the menu button. Each additional press of the menu button advances to the next menu screen. ① Home Screen Use the arrow keys to select one of the following home screen displays: -- Battery Icon/group and channel -- Battery Icon/frequency -- Battery Icon/Battery Runtime (SB900 installed) ULXD2 on ② group Use the arrow buttons to scroll through the groups. ③ channel Use the arrow buttons to scroll through the channels. ④ frequency Use the arrow buttons to adjust the frequency. Press and hold for faster scrolling. AA Batteries ⑤ lock Shure SB900 on Select a lock option: on -- On = controls locked -- OFF = controls unlocked ⑥ rf power Select an rf power setting: -- Lo = 1 mW -- Hi = 10 mW ⑦ mic offset dB Use to match audio levels between two transmitters used in a combo system. Range is 0 to 21 dB (3 dB increments). Adjustments occur in realtime. ⑧ battery type Use to set the battery type to match the installed AA battery type to ensure accurate battery metering. Menu is not displayed when Shure SB900 batteries are installed. AA Adapter AA Adapter ① Accessing the Battery Compartment Press the side tabs on the bodypack or unscrew the cover on the handheld as shown to access the battery compartment. ② Installing Batteries -- AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown -- Shure SB900 Battery: Place battery as shown (note polarity markings), remove AA Adaptor from bodypack transmitter, stow AA Adaptor in door for handheld transmitter Note: If using AA batteries, set the battery type using the transmitter menu. MHz III IIIIIII II II IIII II group channel Setting the AA Battery Type II IIII II IIII dB IIIIIII II mic offset III group channel IIII rf power To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the installed AA battery type. If a Shure SB900 rechargeable battery is installed, selecting a battery type is not necessary and the battery type menu will not be displayed. 1. 2. 3. Press the menu button to navigate to the battery icon. Use the ▼▲ buttons to select the installed battery type: -- AL = Alkaline -- nH = Nickel Metal Hydride -- Li = Lithium Primary Press enter to save. MHz Tips for Editing Menu Parameters • To access the menu options from the home screen, press the menu button. Each additional press of the menu button advances to the next menu screen. • A menu parameter will blink when editing is enabled • To increase, decrease or change a parameter, use the arrow buttons • To save a menu change, press enter • To exit a menu without saving a change, press menu AA Battery Installation Fully insert the batteries as shown to ensure proper battery contact and to allow the door to latch securely. Correct Incorrect Shure SB900 Rechargeable Battery Creating Audio Channels Single chargers and multiple bay chargers are available to recharge the Shure batteries. Caution: Only charge Shure rechargeable batteries with a Shure battery charger. A wireless audio channel is formed when a receiver and transmitter are tuned to the same frequency. To ease setup, frequencies available to the QLX-D system are organized into groups and channels. Each group contains a number of channels, and each channel is assigned to a specific preset frequency. Single Bay Charger The QLX-D system provides 3 methods for tuning the receiver and transmitter to the same frequency: Shure SB900 lithium-ion batteries offer a rechargeable option for powering the QLX-D transmitters. Batteries quickly charge to 50% capacity in one hour and reach full charge within three hours. The single bay charger offers a compact charging solution. 1. Plug the charger into an AC power source or USB port. 2. Insert a battery into the charging bay. 3. Monitor the charging status LEDs until charging is complete. LED • Scan and IR Sync: The receiver scans the RF spectrum for the best available frequency and an IR sync automatically tunes the transmitter to the receiver frequency • Manual Group and Channel Assignment: Manually setting the receiver and transmitter to the same group and channel number forms an audio channel • Manual Frequency Assignment: Manually setting the receiver and transmitter to the same frequency rather than using groups and channels forms an audio channel Important: Before you begin a scan or frequency assignment: • Turn off: All transmitters for system you are setting up to prevent interference with frequency scans. • Turn on: The following potential sources of interference including other wireless systems, computers, CD players, large LED panels, and effects processors to prevent selection of occupied frequencies. Scan and IR Sync The simplest way to create an audio channel is to use the scan function to find the best available receiver channel, and then use the IR sync feature to automatically tune the transmitter to the receiver channel. Charging Status LED Color Status Red Charging Green Amber Flashing Off Charging Complete Fault: check connections and battery No battery in bay Step 1: Scanning to Find the Best Channel The Scan function automatically selects the best available receiver channel. 1. Navigate to the Scan menu option. 2. Press enter to start the scan. 3. When the scan is complete, the channel will appear on the display. IIIIIII I IIIIIIIIIIIII IIII • SBC-200 two bay charger • SBC-800 eight bay charger channel IIIIIIIIIIIIII Shure offers two models of multiple bay chargers: scan IIII Multiple Bay Chargers II IIII IIII Multiple bay chargers can charge individual batteries or batteries installed in transmitters. Step 2: IR Sync for Automatic Transmitter Set Up Performing an IR Sync automatically tunes the transmitter to match the receiver frequency, forming a wireless audio channel. 1. Plug the charger into an AC power source. 2. Insert batteries or transmitters into the charging bay. 3. Monitor the charging status LEDs until charging is complete. 1. Turn on the transmitter. 2. Press the sync button on the receiver. The red ir LED will blink indicating that sync mode is active. 3. Align the IR sync windows of the transmitter and receiver at a distance of <15 cm (6 in.). When the transmitter and receiver are aligned, the red ir LED remains on and the sync will automatically occur. 4. sync good appears on the display when IR sync is complete. The blue rf LED will illuminate indicating that the transmitter is within range of the receiver. Note: If the IR sync fails, repeat the IR sync procedure, carefully maintaining alignment between the IR windows of the transmitter and receiver. Charging Status LED Color Status Green Charging Complete Red Charging Fault: check connections and battery No battery in bay Use manual group and channel configuration to assign specific groups and channels to receivers and transmitters as an alternative method to automatically creating channels with IR sync. Use the following steps to set the group and channel in the receiver and transmitter: Navigate to the group setting. 2. Use the arrow buttons to scroll through the groups. 3. Press enter to select a group. 4. Next, use the arrow buttons to select a channel. 5. Press enter to save. IIIII channel IIIIIIIIIIIIII IIIIIIIII IIIIIIIIIII group II IIII II I IIII IIIIIIIIIII II IIIIIIIIIIIIII 1. IIII • Always store batteries and transmitters at room temperature • Ideally, batteries should be charged to approximately 40% of capacity for long-term storage • During storage, check batteries every 6 months and recharge to 40% of capacity as needed Manual Group and Channel Assignment An audio channel can be manually created by simply setting the receiver and transmitter to the same group number and channel number. For example, a receiver set to Group 2, Channel 3 and a transmitter set to Group 2, Channel 3 would form an audio channel. Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime. < 15 cm (6 in.) IIIIIIIIIIIIIIIIIIII Important Tips for Care and Storage of Shure Rechargeable Batteries IIIII Off IIIIIIIIIIIII Amber Flashing Charge level above 90% IIIIIIIII Green/Red Manual Frequency Selection Manual frequency selection can be used instead of groups and channels to set the transmitter and receiver to a specific frequency. For example, an audio channel can be created by setting the receiver and transmitter to same frequency. 2. Use the arrow buttons to add or remove the lock options shown next to the lock icon. 3. Press enter to save the lock settings. menu Setting the Receiver Frequency gain 1. Press menu to navigate to the frequency setting option. 2. Use the arrow buttons to adjust the frequency. Press and hold for faster scrolling. 3. Press enter to save. enter To unlock a receiver: Tip: To unlock the menu and clear all locks, press and hold the menu button while in the home screen until the unlock icon appears. Press enter to confirm and save change. MHz 1. To unlock gain or power settings, navigate to the lock settings by pressing the menu button. 2. Press the arrow buttons to de-select a lock option. 3. Press enter to confirm and save change. Locking and Unlocking Transmitter Controls The transmitter controls can be locked or unlocked by selecting On (locked) or OFF (unlocked) from the transmitter lock menu. Setting the Transmitter Frequency 1. Press menu to navigate to the frequency setting option. 2. Use the arrow buttons to adjust the frequency. Press and hold for faster scrolling. 3. Press enter to save. MHz If an attempt is made to access a locked control, the lock icon will flash, indicating that the transmitter controls are locked. To set a transmitter lock: 1. Press the menu button to navigate to the lock settings. 2. Use the arrow buttons to select on. 3. Press enter to save. The lock icon appears on the display to confirm that the control locks are enabled. To unlock the transmitter: 1. Press and hold the menu button until OFF and the unlock icon appear on the display. 2. Press enter to save changes. OFF Receiver Gain Adjustment The gain control sets the overall signal level for the system. The default gain level is 12 dB and the available gain range is -18 to 42 dB, in 1 dB increments. Set the gain to a level where the audio LED appears green or yellow, with only the highest audio peaks causing the LED to occasionally turn red and engage the limiter. Reduce the gain if there is audible distortion of the audio. From the receiver home screen, use the arrow buttons to increase or decrease the gain: • A single button press adjusts the gain in 1 dB increments • Press and hold the button for larger adjustments Test the transmitter at performance levels when adjusting the gain. Monitor the audio meter and the audio LED to prevent overloads. TV MHz hr mn dB channel rf audio Control lock options are available for both the receiver and the transmitter to protect against accidental or unauthorized changes. Locks can be directly set from the component menu, or remotely set from WWB6. To maintain protection, controls remain locked when the transmitter is turned off and turned on. Locking and Unlocking the Receiver Controls The receiver has the following control lock options which can be used separately or in any combination: • gain: locks the arrow buttons to prevent changes to the audio gain settings • menu: prevents access to menu items and IR sync (gain controls and power switch remain active) • power: disables power switch (gain and menu controls remain active) To lock a receiver control: 10 The Network Scan feature automates frequency assignment by using a single receiver to scan and deploy frequencies to all networked receiver within the same frequency band. Network Scanning and Frequency Deployment 1. Connect receivers to an active Ethernet network. All receivers must be on the same subnet. 2. Prior to performing a network scan, turn on all receivers and allow 60 seconds for all receivers to join the network. 3. Choose a group or custom group for deployment on the receiver that will be used to initiate the network scan. 4. To start a network scan, press the menu button and navigate to the network scan menu. Press enter. 5. When the scan is complete, the displays of receivers waiting for frequencies will flash. 6. Press enter to deploy the frequencies or press menu to cancel the deployment. 7. The front panel LEDs on each receiver will blink when a deployed frequency has been assigned. gain Control Lock Options for the Receiver and Transmitter 1. Network Scan Press the menu button to navigate to the lock settings. Note: Full frequency deployment may not occur if the number of receivers in the network exceeds the number of available frequencies in the selected group. Try another group or rescan after turning off unused receivers. Troubleshooting Error Codes and Solutions Issue See Solution... No Sound Power, Cables, or Radio Frequency Lack of range, unwanted noise bursts, or dropouts RF Faint sound or distortion Gain, Cables, Reducing Interference or Radio Frequency Error codes are generated when the receiver detects a condition that can potentially affect system performance. If an error is displayed on the receiver, use the following table to identify the problem and find the corresponding solution. Error Code Description Solutions Err.001 Audio Compatibility Err.002 Encryption Mismatch between Shure product lines Update transmitter and receiver firmware to the latest version. Err.003 Encryption Mode Mismatch Err.004 Band Mismatch Err.005 Frequency Mismatch The transmitter and the receiver can be locked to prevent accidental or unauthorized changes. If a locked control is accessed, the lock icon on the display will flash. Follow the instructions to unlock the receiver or transmitter. Err.006 No Frequencies Found Paired transmitters and receivers must have the same firmware version installed to ensure consistent operation. See Firmware Updates topic for firmware update procedure. Err.007 Firmware Mismatch Err.008 Shure SB900 battery runtime does not appear on display Cannot turn transmitter off or change frequency settings, or can't program receiver Receiver display shows FAIL after encryption is disable Interface Locks Encryption Mismatch Group and Channel display shows "--" Custom Group IR Sync Power Make sure that the receiver and transmitter are receiving sufficient voltage. Check the battery indicators. Replace or recharge the batteries if necessary. Gain Adjust the system gain on the front of the receiver. Ensure the mic/line switch setting (XLR output only) on the back of the receiver corresponds to the input of the mixing console, amplifier, or processor. Cables Check that all cables and connectors are fully engaged or locked into position. Inspect cables for damage. Replace if necessary. Interface Locks Firmware Mismatch Encryption Mismatch Indicates an encryption key mismatch has been detected. Perform an IR sync between the receiver and transmitter to clear the error. Custom Group IR Sync When using Custom Groups, always perform an IR sync from the Custom Groups menu in the receiver to ensure accurate display of group and channel information. See Custom Groups topic for additional details. Set encryption to off for components from different Shure products lines, such as QLX-D and ULX-D. Perform an IR sync between the transmitter and receiver to clear the error. Receiver and transmitter are operating in overlapping frequencies from different bands. Receiver and transmitter are from bands that do not share compatible frequencies. Rescan, select a different group, or use WWB to find a frequency. Update firmware on the transmitter and receiver. Check that battery is firmly installed into the battery compartment. If condition persists, replace the battery. Radio Frequency (RF) The blue RF LED will illuminate when a linked transmitter is within range of the receiver. Measure the transmitter range before a performance to avoid operating beyond the specified transmitter range. The RF meter bars indicate amount of RF power being received. This signal could be from the transmitter, or it could be from an interfering source, such as a television broadcast. If the meter shows a signal level when the transmitter is off, then that channel may have interference. Check the surrounding area for sources of interference or change the receiver to a clear frequency. A red RF LED indicates RF overload. Avoid operating multiple systems in close proximity. Frequency Compatibility -- Perform a Scan and Sync to ensure the transmitter and receiver are set to the same channel or frequency -- Look at the label on the transmitter and receiver to make sure they are in the same band (G50, J50, L50, etc...). Reducing Interference -- Perform a scan to find the best open frequency. Perform an IR sync to transfer the settings to the transmitter. -- For multiple systems, make sure that each receiver is assigned to a unique channel. Interference will occur if two transmitters are set to the same channel. -- Maintain a line of sight between transmitter and receiver antennas. -- Move receiver antennas away from metal objects or other sources of RF interference (such as CD players, computers, digital effects, network switches, network cables and Personal Stereo Monitor (PSM) wireless systems). -- Eliminate RF overload (see below). Increasing Range -- Increase transmitter RF power level to Hi -- Use an active directional antenna, antenna distribution system, or other antenna accessory to increase RF range Eliminating RF Overload If the RF OL icon appears on the RF meter, try the following: ----- Reduce the transmitter RF power level from Hi to Lo Move the transmitter further away from the receiver—at least 6 m (20 ft) If you are using active antennas, reduce antenna or amplifier gain. Use omnidirectional antennas 11 Specifications Networking RF Carrier Frequency Range 470–937.5 MHz, varies by region (See Frequency Range and Output Power table) Working Range 100 m (328 ft) Note: Actual range depends on RF signal absorption, reflection and interference. Network Interface Single Port Ethernet 10/100 Mbps Network Addressing Capability DHCP or Manual IP address Maximum Cable Length 100 m (328 ft) RF Tuning Step Size 25 kHz, varies by region QLXD1 RF Sensitivity -97 dBm at 10-5 BER Battery Type Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V Image Rejection >70 dB, typical Mic Offset Range 0 to 21 dB (in 3 dB steps) Latency <2.9 ms Dimensions 86 mm x 65 mm x 23 mm (3.38in. x 2.57 in. x 0.92 in.) H x W x D,without antenna Audio Frequency Response QLXD1 20 – 20 kHz (±1 dB) QLXD2 Note: Dependent on microphone type Weight 138 g (4.9 oz.), without batteries Housing Cast aluminum Audio Input Audio Dynamic Range System Gain @ +10 >120 dB, A-weighted, typical Connector 4-Pin male mini connector (TA4M), See drawing for details Configuration Unbalanced Total Harmonic Distortion −12 dBFS input, System Gain @ +10 <0.1% System Audio Polarity Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. Operating Temperature Range -18°C (0°F) to 50°C (122°F) Note: Battery characteristics may limit this range. Impedance 1 MΩ, See drawing for details Maximum Input Level 1 kHz at 1% THD 8.5 dBV (7.5 Vpp) Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20 -120 dBV, A-weighted, typical Storage Temperature Range -29°C (-20°F) to 74°C (165°F) Note: Battery characteristics may limit this range. RF Output Connector SMA QLXD4 Dimensions 41 mm x 197 mm x 151 mm (1.63 in. x 7.75 in. x 5.94 in.), H x W x D Antenna Type 1/4 wave Housing steel Occupied Bandwidth <200 kHz RF Input Power 1 mW or 10 mW See Frequency Range and Output Power table, varies by region Weight 777 g (1.71 lbs), without antennas Impedance 50 Ω Power Requirements 12 V DC @ 0.4 A, supplied by external power supply (tip positive) Modulation Type Shure proprietary digital Spurious Rejection >80 dB, typical QLXD2 Connector Type BNC Mic Offset Range 0 to 21 dB (in 3 dB steps) Impedance 50 Ω Battery Type Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V Audio Output Dimensions 269 mm x 51 mm (10.6 in. x 2.0 in.) L x Dia. Gain Adjustment Range -18 to +42 dB in 1 dB steps Configuration 1/4" (6.35 mm) Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR balanced (1=ground, 2=audio +, 3=audio −) Impedance Weight 307 g (12.1 oz.), without batteries Housing Machined aluminum Audio Input Configuration Unbalanced 1/4" (6.35 mm) 100 Ω (50 Ω Unbalanced) XLR 100 Ω Maximum Input Level 1 kHz at 1% THD 145 dB SPL (SM58), typical Note: Dependent on microphone type 1/4" (6.35 mm) +12 dBV XLR LINE setting= +18 dBV, MIC setting= -12 dBV RF Output Full Scale Output Mic/Line Switch 30 dB pad Phantom Power Protection 1/4" (6.35 mm) Yes XLR Yes 12 Antenna Type Integrated Single Band Helical Occupied Bandwidth <200 kHz Modulation Type Shure proprietary digital Power 1 mW or 10 mW See Frequency Range and Output Power table, varies by region Frequency Range and Transmitter Output Power Band Frequency Range (MHz) Power ( mW RMS) (Lo/Nm/Hi)* G50 470 to 534 1 / 10 G52 479 to 534 1 / 10 G51 470 to 534 H50 534 to 598 H51 534 to 598 H52 534 to 565 H53 534 to 598 J50 572 to 636 J51 572 to 636 JB 806 to 810 K51 606 to 670 K52 606 to 670 L50 632 to 696 L51 632 to 696 L52 632 to 694 L53 632 to 714 P51 710 to 782 P52 710 to 782 Q51 794 to 806 S50 (823 to 832) (863 to 865) V50 V51 X51 X52 X53 X54 Certified under FCC Part 74. 1 / 10 Certified by IC in Canada under RSS-102 and RSS-210. 1 / 10 IC: 616A-QLXD1G50, 616A-QLXD1H50, 616A-QLXD1J50, 616A-QLXD1L50, 616A-QLXD2G50, 616A-QLXD2H50, 616A-QLXD2J50, 616A-QLXD2L50. 1 / 10 1 / 10 FCC: DD4QLXD1G50, DD4QLXD1H50, DD4QLXD1J50, DD4QLXD1L50, DD4QLXD2G50, DD4QLXD2H50, DD4QLXD2J50, DD4QLXD2L50. IC: 616A-QLXD1X52, 616A-QLXD2X52 FCC: DD4QLXD1X52, DD4QLXD2X52 IC: 616A-QLXD1V50, 616A-QLXD2V50 FCC: DD4QLXD1V50, DD4QLXD2V50 Note: For transmitters operating in the V50 and V51 bands: nominal free space antenna gain at middle of the band is typically -6 dBi, and rolls off at the band edges an additional -4 dB. 1 / 10 Approved under the Declaration of Conformity (DoC) provision of FCC Part 15. 1 / 10 1 / 10 1 / 10 1 / 10 QLXD4 1 / 10 1 / 10 Conforms to electrical safety requirements based on IEC 60065. 1 / 10 The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance 1 / 10 Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: 49-7262-92 49 0 Fax: 49-7262-92 49 11 4 Email: info@shure.de 1 / 10 1 / 10 1 / 10 915 to 928 (Australia) QLXD1, QLXD2 1 / 10 925 -937.5 902 to 907.500, 915 to 928 (Brazil) Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B) 1 / 10 1 / 10 902 to 928 (All America's except Brazil) QLXD1, QLXD2, QLXD4 This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. 1 / 10 174 to 216 174 to 216 Certifications 1 / 10 1 / 10 1 / 10 1 / 10 Note: Frequency bands might not be available for sale or authorized for use in all countries or regions. *Note: Power delivered to the antenna port. Battery Life SB900 alkaline 1/10 mW 20 mW 1/10 mW 20 mW 470 to 940 11 hours 7 hours 11 hours 5:30 hours 1240 to 1260 8:40 hours 6:45 hours 7:30 hours 5:30 hours 174 to 216 9:50 hours 7 hours 9 hours 5:45 hours The values in this table are typical of fresh, high quality batteries. Battery runtime varies depending on the manufacturer and age of the battery. 13 FREQUENCIES FOR EUROPEAN COUNTRIES QLXD-G51 470 - 534 MHz 1 or 10 mW QLXD-H51 534 - 598 MHz 1 or 10 mW QLXD-K51 606 - 670 MHz 1 or 10 mW QLXD-L52 632 - 694 MHz 1 or 10 mW QLXD-P51 710 - 782 MHz 1 or 10 mW QLXD-Q51 794 - 806 MHz 1 or 10 mW QLXD-S50 823 - 832 MHz 863 - 865 MHz 1 or 10 mW QLXD-V51 174 - 216 MHz, 1 or 10 mW Country Code Code de Pays Codice di paese Código de país Länder-Kürzel Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich A, B, BG, CH, CY, CZ, D, DK, EST, F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT, M, N, NL, P, PL RO, S, SK, SLO, TR, all other countries A, B, BG, CH, CY, CZ, D, DK, EST, F, M, N, NL, P, PL RO, S, SK, SLO, TR, FIN, GB, GR, H, HR, I, IRL, IS, L, LT, all other countries FIN, GB, GR, H, HR, I, IRL, IS, L, LT, all other countries A, B, BG, CH, CY, CZ, D, DK, EST, F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT, M, N, NL, P, PL RO, S, SK, SLO, TR, all other countries A, B, BG, CH, CY, CZ, D, DK, EST, F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT, M, N, NL, P, PL RO, S, SK, SLO, TR, all other countries A, B, BG, CH, CY, CZ, D, DK, EST, F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT, M, N, NL, P, PL RO, S, SK, SLO, TR, All other countries 863 - 865 MHz EU: license free A, B, BG, CH, CY, CZ, D, DK, EST, F, M, N, NL, P, PL RO, S, SK, SLO, TR, all other countries tungen und ähnlichen Anwendungen vorgesehen. Dieses Gerät kann möglicherweise auf einigen Funkfrequenzen arbeiten, die in Ihrem Gebiet nicht zugelassen sind. Wenden Sie sich bitte an die zuständige Behörde, um Informationen über zugelassene Frequenzen und erlaubte Sendeleistungen für drahtlose Mikrofonprodukte zu erhalten. * NOTA: Este equipo de radio está destinado para uso en presentaciones musicales profe- sionales y usos similares. Este aparato de radio puede ser capaz de funcionar en algunas frecuencias no autorizadas en su región. Por favor comuníquese con las autoridades nacionales para información sobre las frecuencias autorizadas y los niveles de potencia de radiofrecuencia para micrófonos inalámbricos. FIN, GB, GR, H, HR, I, IRL, IS, L, LT, * HINWEIS: Diese Funkausrüstung ist zum Gebrauch bei professionellen Musikveranstal- FIN, GB, GR, H, HR, I, IRL, IS, L, LT, all other countries professionnels et applications similaires. Il est possible que cet appareil radio soit capable de fonctionner sur certaines fréquences non autorisées localement. Se mettre en rapport avec les autorités compétentes pour obtenir les informations sur les fréquences et niveaux de puissance HF autorisés pour les systèmes de microphones sans fil. license free M, N, NL, P, PL RO, S, SK, SLO, TR, * REMARQUE : Ce matériel radio est prévu pour une utilisation en spectacles musicaux A, B, BG, CH, CY, CZ, D, DK, EST, F, similar applications. This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and RF power levels for wireless microphone products. A, B, BG, CH, CY, CZ, D, DK, EST, F, M, N, NL, P, PL RO, S, SK, SLO, TR, * NOTE: This Radio equipment is intended for use in musical professional entertainment and * NOTA: questo apparecchio radio è concepito per l'intrattenimento musicale a livello professionale ed applicazioni simili. Questo apparecchio radio può essere in grado di funzionare a frequenze non autorizzate nel Paese in cui si trova l'utente. Rivolgetevi alle autorità competenti per ottenere le informazioni relative alle frequenze ed ai livelli di potenza RF autorizzati nella vostra regione per i prodotti radiomicrofonici. * OPMERKING: Deze radioapparatuur is bedoeld voor gebruik bij professionele muzikale amusementsproducties en soortgelijke toepassingen. Dit radioapparaat kan mogelijk werken op bepaalde frequenties die niet zijn toegestaan in uw regio. Raadpleeg de autoriteiten in uw land voor informatie over goedgekeurde frequenties en RF-vermogensniveaus voor draadloze microfoons. * ПРИМЕЧАНИЕ. Данная радиоаппаратура предназначается для использования в профессиональных музыкальных представлениях и аналогичных приложениях. Может оказаться, что эта радиоаппаратура в состоянии работать на некоторых частотах, не разрешенных в вашем регионе. За информацией о разрешенных частотах и уровнях РЧ мощности для беспроводных микрофонных систем обращайтесь в национальные органы власти.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2016:05:03 12:33:25-05:00 Creator : Adobe InDesign CC 2015 (Windows) Modify Date : 2016:05:04 14:34:28-05:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2016:05:04 14:34:28-05:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:1cf947ce-6d23-4948-a842-f8739dd2c21c Original Document ID : xmp.did:62FA8D2527D5E31191C6E669B15B52E0 Document ID : xmp.id:2ddc5c0a-0a69-af47-8a6e-cdb087426b59 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:fde1c9f7-84d3-0849-af53-8bb6f7f07040 Derived From Document ID : xmp.did:fde1c9f7-84d3-0849-af53-8bb6f7f07040 Derived From Original Document ID: xmp.did:62FA8D2527D5E31191C6E669B15B52E0 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:05:03 12:33:25-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 15EXIF Metadata provided by EXIF.tools